Carry out general service checks on non-electric forklifts and forklift attachments
|
|
- Karin O’Brien’
- 5 years ago
- Views:
Transcription
1 Page 1 of 5 Carry out general service checks on non-electric forklifts and forklift attachments Level 3 Credits 4 Purpose This unit standard is for people in the materials handling equipment repair industry. People credited with this unit standard are able to carry out general service checks on non-electric forklifts and forklift attachments. Subfield Domain Status Motor Industry Automotive Preventive Maintenance Registered Status date 20 March 2008 Date version published 20 March 2008 Planned review date 31 December 2012 Entry information Prerequisite: Driver s licence with F endorsement. Recommended: Unit 15471, Demonstrate knowledge of materials handling machine types, their applications, operation, and safety precautions, or demonstrate equivalent knowledge and skills. Accreditation Standard setting body (SSB) Evaluation of documentation and visit by NZQA and industry. NZ Motor Industry Training Organisation (Incorporated) Accreditation and Moderation Action Plan (AMAP) reference 0014 This AMAP can be accessed at Special notes 1 Legislation and publications relevant to this unit standard include but are not limited to Health and Safety in Employment Act 1992; New Zealand Standards NZS/ANSI/ITSDF B56.1:2005 Safety standard for low lift and high lift trucks; NZS/AS 2359 series Powered industrial trucks; Vehicle Inspection Requirements Manual (VIRM) Inspection and certification of forklifts.
2 Page 2 of 5 2 New Zealand Standards are available from Standards New Zealand, Private Bag 2439, Wellington; phone ; or website The VIRM is published by Land Transport New Zealand and is available online at 3 Definitions Company requirements refer to instructions to staff on policy and procedures which are documented in memo or manual format and are available in the workplace. These requirements include but are not limited to company specifications and procedures, work instructions, manufacturer specifications, product quality specifications, and legislative requirements. Service information may include but is not limited to technical information of a vehicle, machine, or product detailing operation; installation and servicing procedures; manufacturer instructions and specifications; technical terms and descriptions; and detailed illustrations. This can be accessed in hard copy or electronic format and is normally sourced from the manufacturer. Suitable tools and equipment means industry approved tools and equipment that are recognised within the industry as being the most suited to complete the task in a professional and competent manner with due regard to safe working practices. 4 This unit standard includes a minimum of two non-electric forklifts. These may be diesel, petrol, liquefied petroleum gas (LPG), or compressed natural gas (CNG) powered forklifts. 5 For this unit standard, it is essential that the practical assessment evidence is obtained in the workplace under normal workplace conditions. Elements and performance criteria Element 1 Carry out general service checks on non-electric forklifts and forklift attachments. Performance criteria 1.1 The level and extent of service required is determined from manufacturer service schedules. 1.2 Safe working practices are observed throughout the task in accordance with legislative requirements. personal safety, safety of others, forklift safety, workshop safety, environmental safety, tools and equipment safety. 1.3 Suitable tools and equipment are selected and used to enable the forklift to be serviced in accordance with service information. 1.4 A visual inspection is carried out on the forklift, and any faults found are recorded and reported in accordance with company requirements.
3 Page 3 of The forklift is tested for operation, and any faults found are recorded and reported in accordance with company requirements. 1.6 All oil and filter changes, and lubricating requirements are completed in accordance with service information, using lubricants and parts that meet manufacturer specifications. 1.7 The cooling system is checked for serviceability, adjustments are carried out in may include but is not limited to coolant level, inhibitor strength, radiator, hoses, pipes and joints, expansion tank, fan, drive belts. 1.8 The fuel system is checked for serviceability, adjustments are carried out in may include but is not limited to fuel filter, fuel injection system, connections, pipes, air cleaner, fuel tank, anchoring points, pressure, governor, leaks. 1.9 The batteries and cables are checked for serviceability and charged or replaced in accordance with service information. may include but is not limited to leaks; corrosion; state of charge; high rate discharge test; general condition of cables, terminals and hold-down brackets Mast and adjacent components are checked for serviceability, adjustments are carried out in accordance with service information, and any defects identified from the checks may include but is not limited to wear, deformation, cracking, corrosion; lift chain, lift cylinder, back rest, tilt cylinder, forks, fork carriage, shim adjustment, cylinder rod, rollers, anchoring points, pump, valve bank Servicing procedures for forklift attachments are identified in accordance with attachment and forklift service information. may include but is not limited to wear, deformation, cracking, corrosion; bearings, pivots, chain drives, backrest, cylinders, forks, fork carriage, shim adjustment, cylinder rod, rollers, anchoring points, wheels, wire or cable guidance system.
4 Page 4 of Attachment is checked for serviceability, servicing is carried out in accordance with service information and legislative requirements, and any defects identified from the checks may include but are not limited to wear, deformation, cracking, corrosion, hydraulics, wire or cable guidance system Steering system is checked for serviceability, adjustments are carried out in may include but is not limited to steering axle, drive axle; steering wheel, wheel bearings, gearbox, orbitral steering, linkages, knuckles and joints, axles, turning radius, pipes, leakage, king pins Brake system is checked for serviceability, adjustments are carried out in may include but is not limited to fluid levels and pressure, air pressure, pedal height and play, stop lamp, brake booster, wheel brake, brake drum, brake force; foot and service brake Hydraulic system is checked for serviceability, adjustments are carried out in 1.16 Tyres and wheels are inspected for serviceability, and any defects identified are reported to the supervisor or customer in accordance with company requirements. may include but is not limited to tyre condition, tyre size and construction matching rim or wheel rating and size, inflation pressures, retaining nuts and bolts condition and torque settings, rim (fatigue cracks, worn, damaged and rusted components), lock ring beading and groove condition, hub condition Electrical equipment is checked for serviceability and operates in accordance with manufacturer specifications. may include but is not limited to batteries, switches, fuses, horn, lamps, charger, wiring The engine is started and run until its normal operating temperature is reached and the ignition timing is checked and adjusted in accordance with service information.
5 Page 5 of The engine and drive line are checked for serviceability, adjustments are carried out in accordance with service information, and any defects identified from the checks may include but is not limited to fuel leaks, coolant leaks, coolant temperature, air leaks and pressure, hydraulic leaks and pressure, belts and belt tensions, universal and constant velocity (CV) joints, noise level All preventive maintenance programme items are implemented and completed, the forklift is cleaned down, and appropriate labels affixed in accordance with the forklift s service record book and company requirements Forklift is operated in all functions to confirm all service checks have been completed The service report is completed and forwarded to the supervisor or customer in accordance with company requirements. Please note Providers must be accredited by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be accredited by NZQA before they can register credits from assessment against unit standards. Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards. Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Comments on this unit standard Please contact the NZ Motor Industry Training Organisation (Incorporated) moderation@mito.org.nz if you wish to suggest changes to the content of this unit standard.
Test and service hydraulic systems on equipment, vehicles, and/or machines
Page 1 of 5 Test and service hydraulic systems on equipment, vehicles, and/or machines Level 3 Credits 6 Purpose This unit standard is for people in the automotive repair industry. People credited with
More informationCarry out routine maintenance on automotive automatic transmissions
Page 1 of 5 Carry out routine maintenance on automotive automatic transmissions Level 3 Credits 4 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit
More informationDemonstrate knowledge of servicing automotive air conditioning systems
Demonstrate knowledge of servicing automotive air conditioning systems 24448 version 1 Page 1 of 5 Level 3 Credits 2 Purpose This theory-based unit standard is for people in the automotive repair industry.
More informationOperate a root crop harvester
Page 1 of 5 Operate a root crop harvester Level 4 Credits 20 Purpose People credited with this unit standard are able to: select and prepare root crop harvesting equipment and machinery; carry out field
More informationMeet Approved Handler requirements for the transport of bulk hazardous substances by road
Meet Approved Handler requirements for the transport of bulk hazardous substances by road 25986 version 1 Page 1 of 5 Level 4 Credits 6 Purpose This unit standard is for the drivers of road transport vehicles
More informationCarry out routine inspection and servicing on substation emergency services
Page 1 of 6 Carry out routine inspection and servicing on substation emergency services Level 3 Credits 4 Purpose People credited with this unit standard are able to: prepare for inspection and servicing
More informationTrim and limb shelter belts
Page 1 of 5 Trim and limb shelter belts Level 4 Credits 10 Purpose People credited with this unit standard are able to: select and prepare trimming and limbing equipment and machinery; carry out field
More informationForklift Operator Safety Safe Operation and Pre-Use Inspection
EXERCISE #1 Target Audience: Forklift operators Exercise Objective: Evaluate understanding of safe forklift operation and pre-use inspection criteria Instructions: Answer the questions below. Review your
More informationSet up, repair and maintain a Baader BA 190 fish filleting machine
Set up, repair and maintain a Baader BA 190 fish filleting machine 17949 version 3 Page 1 of 6 Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 190 fish filleting
More informationTransport bulk gases by road
Page 1 of 9 Transport bulk gases by road Level 4 Credits 15 Purpose This unit standard is for drivers of road tank wagons who load, transport and unload bulk gases under pressure, including hazardous and
More informationRemove and repair perforated non-structural body panel corrosion damage
Page 1 of 5 Remove and repair perforated non-structural body panel corrosion damage Level 3 Credits 3 Purpose This unit standard is for people who work in the motor body industry. People credited with
More informationManage the transportation of hazardous substances by road
Manage the transportation of hazardous substances by road Page 1 of 5 Level 6 Credits 10 Purpose This unit standard is for carriers of goods service vehicles carrying hazardous substances. People credited
More informationOperate hydro-electric station auxiliary plant
Page 1 of 6 Operate hydro-electric station auxiliary plant Level 4 Credits 8 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles of electricity generation
More informationSet up, repair and maintain a Baader BA 212CK fish filleting machine
Page 1 of 5 Set up, repair and maintain a Baader BA 212CK fish filleting machine Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 212CK fish filleting machine, able
More informationCarry out routine inspection and servicing on high voltage bulk oil circuit breakers
Page 1 of 6 Carry out routine inspection and servicing on high voltage bulk oil circuit breakers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare for inspection, testing
More informationCarry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus
Page 1 of 7 Carry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus Level 4 Credits 4 Purpose People credited with this unit standard are able to: prepare for
More informationTransport horses by road
Page 1 of 5 Transport horses by road Level 4 Credits 25 Purpose This unit standard is for drivers of road transport vehicles carrying horses. People credited with this unit standard are able to: describe
More informationApply earths to and remove earths from electrical conductors, plant and equipment
Page 1 of 5 Apply earths to and remove earths from electrical conductors, plant and equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: demonstrate knowledge of earthing
More informationInstall and commission high voltage (HV) electricity current transformer metering
Page 1 of 5 Install and commission high voltage (HV) electricity current transformer metering Level 4 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of the
More informationDEMOLITION Operate a hydraulic excavator on demolition sites
1 of 7 level: 3 credit: 25 planned review date: November 2007 sub-field: purpose: entry information: accreditation option: moderation option: Civil Works and Services People credited with this unit standard
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and servicing on high voltage minimum oil circuit breakers
1 of 9 level: 4 credit: 6 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for inspection, testing
More informationControl pests by fumigation in the urban pest management industry
Page 1 of 5 Control pests by fumigation in the urban pest management industry Level 4 Credits 15 Purpose This is a specialist unit standard for people training for the urban pest management industry. People
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Operate timber treatment plant Level 3 Credits 15 Purpose People credited with this unit standard are able to: manage hazards associated with operating and maintaining timber treatment
More informationDemonstrate the requirements for holding permits on high voltage electrical equipment
Page 1 of 6 Demonstrate the requirements for holding permits on high voltage electrical equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: describe the requirements
More informationAssist press operator on a reel-fed printing press
Page 1 of 5 Assist press operator on a reel-fed printing press Level 2 Credits 12 Purpose People credited with this unit standard are able to: follow safety requirements for the press being used; check
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and service on oil filled distribution power transformers 11kV to 400V
1 of 8 level: 4 credit: 8 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for routine service transformers
More informationAUTOMOTIVE WORKSHOP ENGINEERING Use an oxy-acetylene welding plant in the motor industry
1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21682 replaced unit standard 230 and unit standard 3885.
More informationNZQA registered unit standard version 3 Page 1 of 5. Infrastructure Works > Civil Plant Operation
Page 1 of 5 Title Operate a motor grader for earthworks Level 3 Credits 20 Purpose People credited with this unit standard are able to: prepare for grader operations; manoeuvre and control grader on site;
More informationTransport perishable products by road
Page 1 of 5 Transport perishable products by road Level 4 Credits 25 Purpose This unit standard is for those who drive, or intend to drive, road transport vehicles transporting perishable products. People
More informationExplain foot and mouth disease controls in the processing of milk in the dairy industry
Page 1 of 5 Explain foot and mouth disease controls in the processing of milk in the dairy industry Level 3 Credits 4 Purpose People credited with this unit are able to: explain the features and characteristics
More informationForklift Operator Safety Program
Forklift Operator Safety Program Program originated: 9/2009 Last updated: 1/2015 Wendel Reece University Safety Manager FORWARD The University of Northern Iowa Forklift Operator Safety Program is a guide
More informationGOODS SERVICE Transport vehicles by road transporter
1 of 5 level: 4 credit: 3 planned review date: March 2009 sub-field: purpose: Commercial Road Transport This unit standard is for drivers of road haulage vehicles carrying vehicles. People credited with
More informationOutline New Zealand Greenshell mussel (kutai, kuku) farming
Outline New Zealand Greenshell mussel (kutai, kuku) farming 16337 version 3 Page 1 of 5 Level 2 Credits 10 Purpose People credited with this unit standard are able to: identify the Greenshell mussel; describe
More informationMaximise timber recovery
Page 1 of 6 Maximise timber recovery Level 5 Credits 25 Purpose People credited with this unit standard are able to: manage safety when maximising timber recovery; compare log supply with log specification;
More informationMake ready a sheet-fed offset printing press for spot colour work
Make ready a sheet-fed offset printing press for spot colour work 26318 version 1 Page 1 of 5 Level 3 Credits 30 Purpose People credited with this unit standard are able to: check job documentation and
More informationIMIHV01 Carry out routine commercial vehicle maintenance
IMIHV01 Carry out routine commercial vehicle maintenance Overview This NOS is about conducting routine examination, adjustment and replacement activities as part of the periodic maintenance of commercial
More informationDemonstrate an advanced knowledge of railway signals
Page 1 of 5 Demonstrate an advanced knowledge of railway signals Level 4 Credits 15 Purpose People credited with this unit standard are able to: demonstrate an advanced knowledge of fixed railway signals,
More informationLevel 2 NVQ Diploma in Construction Plant or Machinery Maintenance (Construction)
Level 2 NVQ Diploma in Construction Plant or Machinery Maintenance (Construction) Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification Structure 4
More informationVEHICLE BODYWORK Mask a repair for priming; and prime, fill, and sand a repair in the motor body industry
1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21703 replaced unit standard 3868 and unit standard
More informationGOODS SERVICE Transport bulk dry goods by heavy motor vehicle
1 of 7 level: 3 credit: 6 planned review date: March 2009 sub-field: purpose: entry information: accreditation option: moderation option: Commercial Road Transport People credited with this unit standard
More informationStudents will know Vocabulary: career college personal skills technical school ASE certification
Consumer Mechanics/Intro to Auto Essential Questions: 1. How do personal skills, interests and abilities play a role in developing a future career path? (or relate to different career paths) 2. How do
More informationStore, maintain, and distribute liquid food or related products using automated systems
Page 1 of 5 Store, maintain, and distribute liquid food or related products using automated systems Level 3 Credits 3 Purpose This unit standard is for people who are currently working, or who intend to
More informationCarry out acceptance and maintenance tests on distance protection relays
Page 1 of 5 Carry out acceptance and maintenance tests on distance protection relays Level 5 Credits 4 Purpose People credited with this unit standard are able to: prepare for acceptance and maintenance
More informationDemonstrate knowledge of vegetation fire behaviour
Page 1 of 5 Demonstrate knowledge of vegetation fire behaviour Level 5 Credits 8 Purpose This unit standard is for people with responsibilities for vegetation fire pre-suppression preparedness planning
More informationPlan and manage helicopter overhead lines operation
Page 1 of 5 Plan and manage helicopter overhead lines operation Level 5 Credits 10 Purpose People credited with this unit standard are able, for helicopter overhead lines operations, to: plan; organise
More informationConfirm log grades and scale logs
Page 1 of 5 Confirm log grades and scale logs Level 3 Credits 10 Purpose People credited with this unit standard are able to: manage hazards associated with confirming log grades and scaling logs; demonstrate
More informationCOMPREHENSIVE GUIDE TO LIFT TRUCK SERVICE
COMPREHENSIVE GUIDE TO LIFT TRUCK SERVICE OUR COMMITMENT TO PERFORMANCE IS YOUR UPTIME GUARANTEED. SCMH is fully committed to performance, translating for its customers, a promise only over 75 years of
More informationProduce screens, and make stencils using the capillary system, for screen printing
Page 1 of 5 Produce screens, and make stencils using the capillary system, for screen printing Level 3 Credits 12 Purpose People credited with this unit standard are able to: check documentation and confirm
More informationCONSTRUCTION HEALTH AND SAFETY, AND INJURY PREVENTION Prevent hazards when working with cranes, lifting appliances and rigging on construction sites
1 of 7 level: 4 credit: 4 planned review date: December 2003 sub-field: purpose: Construction People credited with this unit standard are able to: identify different types of rigging and lifting work for
More informationEstablish quality requirements, manage, and monitor the installation of subdivision infrastructure
Page 1 of 5 Establish quality requirements, manage, and monitor the installation of subdivision infrastructure Level 6 Credits 18 Purpose This unit standard is for people who are working, or who intend
More informationNZQA registered unit standard version 2 Page 1 of 5. Use a mini-crawler crane with outriggers to lift and place regular loads
Page 1 of 5 Title Use a mini-crawler crane with outriggers to lift and place regular loads Level 3 Credits 15 Purpose People credited with this unit standard are able to: prepare to lift and place regular
More informationNational Certificate in Wood Manufacturing - Generic Skills (Workplace Safety and Operations) (Level 2) Level 2
NZQF NQ Ref 1304 Version 4 Page 1 of 10 National Certificate in Wood Manufacturing - Generic Skills (Workplace Safety and Operations) (Level 2) Level 2 Credits 43 This qualification has been reviewed.
More informationOperate a diesel-mechanical/hydraulic railcar/multiple unit on a main line managed by a network operator
Page 1 of 5 Operate a diesel-mechanical/hydraulic railcar/multiple unit on a main line managed by a network operator Level 4 Credits 10 Purpose People credited with this unit standard are able to: prepare
More informationNZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident
Page 1 of 5 Title Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: the interrelated
More informationNote: Do not use the platform stacker before reading and understanding these operation instructions.
Operating Instructions Parts List Manuel d utilisation Nomenclation Note: Do not use the platform stacker before reading and understanding these operation instructions. Remarque: Propriétaire et utilisateur
More informationGOODS SERVICE Operate a truck mounted sidelifter
1 of 6 level: 3 credit: 6 planned review date: March 2009 sub-field: purpose: entry information: accreditation option: moderation option: Commercial Road Transport People credited with this unit standard
More informationDemonstrate and apply knowledge of leading a security team
Demonstrate and apply knowledge of leading a security team 25627 version 1 Page 1 of 7 Level 4 Credits 15 Purpose This unit standard is for security team leaders who are required to lead a team in a security
More informationInstruct a programme using low ropes course activities
Page 1 of 5 Instruct a programme using low ropes course activities Level 5 Credits 5 Purpose People credited with this unit standard are able to: prepare for instructing low ropes course activities; instruct
More informationNZQA Expiring unit standard 3885 version 8 Page 1 of 5. Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry
Page 1 of 5 Title Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry Level 2 Credits 4 Purpose This unit standard is for people who are at pre-employment level or
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2009.
NQF Ref 1073 Version 4 Page 1 of 18 National Certificate in Materials Processing (Level 2) with strands in General, Plastics Injection Moulding, Plastics Extrusion, Plastics Blow Moulding, Plastics Pressure
More informationManage electricity generation dispatch
Page 1 of 6 Manage electricity generation dispatch Level 6 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of principles of power system operation; identify
More informationModification History. Unit Descriptor. Application of the Unit. Licensing/Regulatory Information. Pre-Requisites
Modification History Not Applicable Unit Descriptor Unit Descriptor This unit specifies the outcomes required for the operation of a powered industrial truck equipped with a mast and an elevating load
More informationIntroduction to Automotive Technology
Introduction to Automotive Technology Course Design 2005-2006 Course Information Organization Eastern Arizona College Division ITE Course Number AUT 101 Title Introduction to Automotive Technology Credits
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Describe drinking-water supply reticulation systems Level 5 Credits 8 Purpose People credited with this unit standard are able to describe: the reticulated services found on public and
More informationForklift Course Pre-Reading Information. Version 2.0. March 2011
Forklift Course Pre-Reading Information Version 2.0 March 2011 Reading through this manual prior to sitting your forklift course will assist you in preparing for your in-class theory session and written
More informationNZQA registered unit standard version 5 Page 1 of 6. Operate hydro-electric generating plant from enterprise control room
Page 1 of 6 Title Operate hydro-electric generating plant from enterprise control room Level 6 Credits 16 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles
More informationSafe Use of Orchard Elevating Work Platforms April 2010
Safe Use of Orchard Elevating Work Platforms April 2010 Powerladders produced by edp have helped growers improve efficiency and reduce the risk of injury in orchards for over 30 years. Powerladders are
More informationPUBLIC SECTOR SERVICE DELIVERY Develop public sector service delivery objectives, and implement systems to meet client needs
1 of 5 level: 7 credit: 20 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationNZQA Expiring unit standard version 2 Page 1 of 5. Install and maintain water mains and water supply systems and reticulation
Page 1 of 5 Title Install and maintain water mains and water supply systems and reticulation Level 4 Credits 8 Purpose This unit standard is for people who work in the plumbing industry. People credited
More informationGUILFORD COUNTY SCHOOLS JOB DESCRIPTION JOB TITLE: MECHANIC III-SHOP CREW CHIEF TRANSPORTATION DEPARTMENT GENERAL STATEMENT OF JOB
GUILFORD COUNTY SCHOOLS JOB DESCRIPTION JOB TITLE: MECHANIC III-SHOP CREW CHIEF TRANSPORTATION DEPARTMENT (c) DMG, 1994, Rev. 2000, Rev. 2/06 1 GENERAL STATEMENT OF JOB Under general supervision, performs
More informationDescribe practices to maintain the quality of perishable products during transport by road
Page 1 of 5 Describe practices to maintain the quality of perishable products during transport by road Level 3 Credits 5 Purpose This unit standard is for those who drive, or intend to drive, road transport
More informationTransportation, Distribution & Logistics Skill Standards Checklist
Engine/ ofworkforcedevelopment DivisionofEmploymentandTraining Student Name YA Coordinator School District Transportation, Distribution & Logistics Skill Standards Checklist Certification Areas Completed:
More informationDemonstrate knowledge of the fundamentals of power system earthing
Page 1 of 5 Demonstrate knowledge of the fundamentals of power system earthing Level 7 Credits 15 Purpose People credited with this unit standard are able to: compile an explanation on the purpose of earthing;
More informationMeasure and prune trees around electricity lines for vegetation control to minimum approach distance
Page 1 of 5 Measure and prune trees around electricity lines for vegetation control to minimum approach distance Level 4 Credits 8 Purpose People credited with this unit standard are able to: select tree
More informationCarry out off-road motorcycle training
Page 1 of 5 Carry out off-road motorcycle training Level 5 Credits 10 Purpose People credited with this unit standard are able to: prepare for a training session in riding motorcycles off-road; conduct
More informationPrepare a schedule of quantities, cost estimate and tender documentation for landscape work
Page 1 of 5 Prepare a schedule of quantities, cost estimate and tender documentation for landscape work Level 5 Credits 15 Purpose This unit standard is for people working, or intending to work, in landscaping.
More informationForklift Operator Training
Forklift Operator Training the tireless workhorse of the lumber industry Before you start, keep this in mind Forklifts are the backbone of 84 Lumber and 84 Components Without them, we cannot receive material
More information40/50/55/60/70 IC-CUSHION LPG. 8,000 / 10,000 / 12,000 / 13,500 / 15,500 lbs. / 5000 / 5500 / 6000 /7000 kg)
CGC (4000 40/50/55/60/70 IC-CUSHION 8,000 / 10,000 / 12,000 / 13,500 / 15,500 lbs. / 5000 / 5500 / 6000 /7000 kg) 7 metric tons With a capacity of up to 15,500 lbs. the CLARK CGC 40/50/55/60/70 gets the
More informationCourse Outcome Summary
Course Information: Description: Basic Maintenance Instruction Level: Grades 11-12 Total Credits: 1 Course ACT College and Career Readiness Standards This course is for those looking to enter the automotive
More informationExplain hatchery techniques used in the New Zealand aquaculture industry
Page 1 of 5 Explain hatchery techniques used in the New Zealand aquaculture industry Level 4 Credits 15 Purpose People credited with this unit standard are able to explain: the conditioning and management
More informationNZQA registered unit standard 3846 version 7 Page 1 of 7. Maintain commercial refrigeration and/or air conditioning systems
Page 1 of 7 Title Maintain commercial refrigeration and/or air conditioning systems Level 3 Credits 20 Purpose This unit standard is for people who work in the refrigeration and air conditioning sector
More informationPowered Industrial Trucks (Forklift) Program. Elizabeth City State University Office of Environmental Health & Safety
Powered Industrial Trucks (Forklift) Program Elizabeth City State University Office of Environmental Health & Safety I. Purpose In accordance to the provisions of the NC OSHA Powered Industrial Truck Standard
More informationGUIDELINES. Guidelines. Lifting. Guidelines for the safe management and the thorough examination of lift trucks
Lifting GUIDELINES Guidelines Guidelines for the safe management and the thorough examination of lift trucks (Document Reference: LG 4 Dated 19/11/03) FOREWORD The purpose of these Guidelines is twofold.
More informationREFERENCE ID: AGR / Q
QUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR AGRICULTURE Contents What are Occupational Standards(OS)? OS describe what individuals need to do, know and understand in order to carry out a particular
More informationLight Vehicle Inspection. Overview
Light Vehicle Inspection Overview Issue 1.5 02-04-2013 ATA LV Inspection What is ATA? ATA is recognition of the current competence of professionals working in the Retail Motor Industry and their commitment
More informationNZQA registered unit standard 3851 version 7 Page 1 of 5. Service commercial refrigeration and/or air conditioning systems
Page 1 of 5 Title Service commercial refrigeration and/or air conditioning systems Level 4 Credits 20 Purpose This unit standard is for people who work in the refrigeration and air conditioning sector
More informationUse advanced felling techniques in arboriculture
Page 1 of 5 Use advanced felling techniques in arboriculture Level 4 Credits 10 Purpose This unit standard is for people wishing to extend their tree felling skills in an arboriculture situation. People
More informationNZQA registered unit standard version 4 Page 1 of 5. Carry out switching operations on metal clad switchgear
Page 1 of 5 Title Carry out switching operations on metal clad switchgear Level 4 Credits 3 Purpose People credited with this unit standard are able to: demonstrate knowledge of metal clad switchgear,
More informationApproved for public release: Distribution is unlimited.
TECHNICAL MANUAL Unit, Direct Support and General Support Maintenance REPAIR PARTS AND SPECIAL TOOLS LIST for WAREHOUSE CRANE 10,000 LB. CAPACITY, M469 WHEELED, DIESEL POWERED NSN 3950-01-412-5345 (Grove
More informationPUBLIC SECTOR SERVICE DELIVERY Establish client needs and gain agreement on requirements for public sector service delivery
1 of 5 level: 6 credit: 15 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationNZQA registered unit standard 738 version 5 Page 1 of 7
Page 1 of 7 Title Kiln dry timber Level 4 Credits 25 Purpose People credited with this unit standard are able to: demonstrate knowledge of kiln drying operations; demonstrate knowledge of dry and wet bulb
More informationNVD-40 NEAR VERTICAL DRUM LIFTER INSTRUCTION MANUAL
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: info@vestil.com
More informationFORKLIFT AND INDUSTRIAL TRUCKS SAFETY PROGRAM
TRUCKS SAFETY 1. PURPOSE Establish requirements and procedures for the safe operation and use of Powered Industrial Trucks. 2. SCOPE To all D&D TECH SYSTEMS, INC. employees who operate a Powered Industrial
More informationForklift inspection checklist template word
Forklift inspection checklist template word The Borg System is 100 % Forklift inspection checklist template word Download free forklift checklists. Includes Forklift Pre-Start Checklist, Daily Safety Checklist,
More informationCheck, coat and reinforce polystyrene substrate to form a Proprietary Plaster Cladding System on site
Page 1 of 5 Check, coat and reinforce polystyrene substrate to form a Proprietary Plaster Cladding System on site Level 3 Credits 20 Purpose People credited with this unit standard are able to: check polystyrene
More informationVEHICLE BODYWORK Detail and groom a vehicle
1 of 5 level: 2 credit: 4 planned review date: December 2009 sub-field: purpose: entry information: accreditation option: moderation option: Motor Industry People credited with this unit standard are able
More informationLEATHER - CUTTING AND CLOSING Perform specialist footwear closing operations
1 of 5 level: 2 credit: 9 planned review date: November 2005 sub-field: purpose: entry information: accreditation option: moderation option: special notes: Footwear and Leather Trades People credited with
More informationEASTERN MICHIGAN U N I V E R S I T Y AERIAL WORK PLATFORMS PROGRAM
EASTERN MICHIGAN U N I V E R S I T Y AERIAL WORK PLATFORMS PROGRAM Department of Public Safety Health and Safety Office 1200 Oakwood Ypsilanti, Ml 48197 734.487.0794 January 2007 EASTERN MICHIGAN UNIVERSITY
More informationCR-SERIES CARPET POLES INSTRUCTION MANUAL
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-339 www.vestilmfg.com e-mail: sales@vestil.com
More informationIRRIGATION Demonstrate knowledge of irrigation systems, components, and performance
1 of 5 level: 4 credit: 6 planned review date: August 2006 sub-field: purpose: entry information: accreditation option: moderation option: Water Industry People credited with this unit standard are able
More information