Low Voltage alternators - 4 pole LSA 42.3

Size: px

Start display at page:

Download "Low Voltage alternators - 4 pole LSA 42.3"

Norman Wade
5 years ago
Views:

Low Voltage alternators - 4 pole LSA 42.3 2 to 60 kva - 0 Hz / 31.

1 Low Voltage alternators - 4 pole LSA to 60 kva - 0 Hz / 31. to 7 kva - 60 Hz Electrical and mechanical data 42en / c

SPECIALLY ADAPTED TO APPLICATIONS The LSA 42.3 alternator is designed to be suitable for typical generator applications, such as: backup, marine applications, rental, telecommunications, etc.

2 SPECIALLY ADAPTED TO APPLICATIONS The LSA 42.3 alternator is designed to be suitable for typical generator applications, such as: backup, marine applications, rental, telecommunications, etc. COMPLIANT WITH INTERNATIONAL STANDARDS The LSA 42.3 alternator conforms to the main international standards and regulations: - IEC 60034, NEMA MG 1.22, ISO 28-3, CSA / UL on request, marine regulations, etc. It can be integrated into a CE marked generator. The LSA 42.3 is designed, manufactured and marketed in an ISO 01 environment and ISO TOP OF THE RANGE ELECTRICAL PERFORMANCE Class H insulation. Standard 12 wire re-connectable winding, 2/3 pitch, type no. 6. Voltage range: - 0 Hz: 2 V V and 3 V - 41 V (440 V) - 60 Hz: 8 V V and 3 V - 4 V High effi ciency and motor starting capacity. Other voltages are possible with optional adapted windings: - 0 Hz: 440 V (no. 7), 00 V (no. 9), 6 V (n or 2) - 60 Hz: 3 V and 416 V (no. 8), 600 V (no. 9) THD Total harmonic distortion < 2% (full load). R 791 interference suppression conforming to standard EN 011 group 1 class B standard for European zone (CE marking). REINFORCED MECHANICAL STRUCTURE USING FINITE ELEMENT MODELLING Compact rigid assembly to better withstand generator vibrations. Steel frame. Aluminium fl anges and shields. Two-bearing and single-bearing versions designed to be suitable for commercially-available heat engines. Half-key balancing two bearing. Permanently greased bearings ( 000h). Direction of rotation : clockwise and anti-clockwise (without derating). EXCITATION AND REGULATION SYSTEM SUITED TO THE APPLICATION Excitation system Regulation options Voltage regulator PMG T.I. Current transformer for paralleling R726* Mains paralleling R 731* 3-Phase sensing R 734* 3-Phase sensing on mains paralleling unbalanced Potentiometer Remote voltage R 2 Std R Std Std R 40 Optional Optional Optional D* Optional Optional Optional inclus inclus contact factory * Steel terminal box mounting only. : Possible mounting. COMPACT AND DESIGN TERMINAL BOX Easy access to the AVR (lid) and to the connections. 8 way terminal block for reconnecting the voltage. Predrilled holes for cable gland. Steel terminal box in option. PROTECTION SYSTEM SUITED TO THE ENVIRONMENT The LSA 42.3 is IP 23. Standard winding protection for clean environments with relative humidity, including indoor marine environments. Options: - Filters on air inlet : derating %. - Filters on air inlet and air outlet (IP 44) : derating %. - Winding protection for harsh environments and relative humidity greater than. - Space heaters. - Thermal protection for stator windings. - Height fi xing : H = 22 mm (option) with the order.. Copyright 04: MOTEURS LEROY-SOMER LEROY-SOMER reserves the right to modify the design, technical specifi cations and dimensions of the products shown in this document. The descriptions cannot in any way be considered contractual. The values indicated are typical values. 2

3 General characteristics Insulation class H Excitation system or PMG Winding pitch 2/3 (wdg 6) AVR type R 2 R 438 Number of wires 12 Voltage regulation (*) ± 0. % ± 0. % Protection IP 23 Short-circuit current - 0% (3 IN): s Altitude 00 m Totale Harmonic distortion THD (**) no load < 3% - on load < 2% Overspeed 220 min -1 Waveform: NEMA = TIF (**) < 0 Air flow 0.m 3 /s, 0 Hz m 3 /s, 60 Hz (*) Steady state. (**) Total harmonic distortion between phases, no-load or on-load (non-distorting). Ratings 0 Hz - R.P.M. kva / kw - P.F. = 0,8 Duty/T C Continuous duty/40 C Continuous duty/40 C Stand-by/40 C Stand-by/27 C Class/T K H/12 K F/ K H/10 K H/163 K Phase 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph. Y 3V 400V 41V 440V 3V 400V 41V 440V 3V 400V 41V 440V 3V 400V 41V 440V 2V 2V 240V 2V 2V 2V 240V 2V 2V 2V 240V 2V 2V 2V 240V 2V YY 2V 2V 2V 2V 42.3 VS1 kva 2 24, 1 22,8 22,3 13,7 26, 26 1,9 27, 27 16, kw 19, ,2 17,9,9 21,2,8 12, ,6 13, VS2 kva 27 24,2 16,2 24,6 22,0 14,7 28,9 2,7 17,3 26,6 18 kw 21,6 19, ,7 17,6 11,8 23,1, 13, ,3 14, VS3 kva 32 19,2 29,1 27,3 17, 34 31,8,4 3,2 33,0 21,1 kw 2,6 24 1,4 23,3 21, ,1 2,4 16,3 28,2 26,4 16, S4 kva 3, ,9 37,1 32, 23,3 38, 33,7 24,2 kw 28 24, 17,6 2, 22, , ,7,8 27,0 19, S kva ,4 31,9 22,8 42,4 37,1 26, 4 38, 28.1 kw ,1 2, 18,2 33,9 29,7 21,2 36, kva , 24,6 48,2 41,3 28,9 0 42,9 kw 36 31,2 21,6 32,8 28,4 19,7 38, 33,1 23, , kva , 39,1 27,3 3 4,6 31,8 47,3 33 kw 40 34, ,4 31,3 21,8 42,4 36, 2, ,8 26, kva 60 1,6 36 4,6 47,0 32,8 63,6 4,7 38,2 66 6,8 40 kw 48 41,3 28,8 43,7 37,6 26,2 0,9 43,8, 2,8 4,4 32 Ratings 60 Hz - R.P.M. kva / kw - P.F. = 0,8 Duty/T C Continuous duty/40 C Continuous duty/40 C Stand-by/40 C Stand-by/27 C Class/T K H/12 K F/ K H/10 K H/163 K Phase 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph. 3 ph. 1 ph. Y 3V 416V 440V 4V 3V 416V 440V 4V 3V 416V 440V 4V 3V 416V 440V 4V 2V 240V 240V 2V 240V 240V 2V 240V 240V 2V 240V 240V YY 8V 2V 240V 8V 2V 240V 8V 2V 240V 8V 2V 240V 42.3 VS1 kva 29,1 31,3 31, 31, 18,9 26, 28,4 28,7 28,7 17,2,8 33,1 33,4 33, ,4 34,7 34,7,8 kw 23,3 2 2,2 2,2 1,1 21,2 22,8 22,9 22,9 13,8 24,7 26, 26,7 26,7 16 2,6 27, 27,7 27,7 16, VS2 kva 29,9 31,9 33,8 33,8,3 26,9 29,7,7 18,4 31,4 33,8 3,8 3,8 21, 32, 3,1 37, 37, 22,3 kw 23,7 2, ,2 21, 23,2 24,6 24,6 14,7 2,1 27,1 28,6 28,6 17, ,1 17, VS3 kva 34, ,4 34,6 36,4 36,4 21,8 36,6 40,3 42,4 42,4 2, , ,4 kw 27,6, ,2 2,1 27,7 29,1 29,1 17, 29,3 32,2 33,9 33,9,4,4 33,4 3,2 3,2 21, S4 kva ,3 42,9 43,8 27, 33,4 36,6 39,0 39, ,7 4,4 46,4 29,2 40,4 44,3 47,2 48,1,3 kw 32,2 34, ,8 29,3 31,2 31,9 31,2 34,1 36,4 37,1 23,3 32,3 3,4 37,7 38, 24, S kva ,3 38,2 41,9 44,6 4, 28,4 44, 0 1,9 3 33,1 46,2 0,6 3,9 34,4 kw 33,6 36,8 39,2 40 2,6 33, 3,7 36,4 22,8 3, ,6 42,4 26, 37 40, 43, , 42.3 kva , 6, 33,9 41,9 4, 48,7 1,4,8 48,8 3 6,7 9,9 3,9 0,6 8,9 62, 37, kw 36, ,8 4,2 27,1 33, 36,4 38,9 41,1 24, ,4 4,4 47,9 28,7 40, 44 47, kva 1, 6, 9, 62, 37, 46,9 1,4 4,1 7 34,1 4, ,1 66,3 39,8 6,7 62, 6, 68,8 41,3 kw 41,2 4,2 47,6 0 37, 41,1 43,3 4, 27,3 43,7 48 0, 3 31,8 4,3 0 2, kva ,7 9,2 62,8 68, , 68,9 73,1 79, 47,7 64,9 71, 7,9 82, 49, kw 47,2 2,0, ,0 47,3 0,2 4,6 32,8 0,0,1 8, 63,6 38,2 1,9 7,2 60,7 66,0 39,6 3

4 Efficiencies 0 Hz ( P.F. : 0.8 ) (... P.F. : 1 ) LSA 42.3 VS LSA 42.3 S LSA 42.3 VS LSA LSA 42.3 VS LSA LSA 42.3 S LSA Reactances (%). Time constants (ms) - Class H/400 V VS1 VS2 VS3 S4 S Kcc Short-circuit ratio 0,2 0,49 0,4 0,44 0,44 0,46 0,4 0,47 Xd Direct-axis synchro. reactance unsaturated Xq Quadrature-axis synchro. reactance unsaturated T do No-load transient time constant X d Direct-axis transient reactance saturated 14,7 1,4 16,6 14,3 16,3 1, 1,3 11,6 T d Short-circuit transient time constant X d Direct-axis subtransient reactance saturated 7,4 7,7 8,3 7,1 8,1 7,8 7,7,8 T d Subtransient time constant X q Quadrature-axis subtransient reactance saturated, 11,0 11,9.2 11,6 11,0,9 8,2 Xo Zero sequence reactance unsaturated X2 Negative sequence reactance saturated 8,9 9,3, ,88 9,39 9,28 6,99 Armature time constant Other class H/400 V data Ta 7, 7, 7, 7, 7, 7, 7, 7, io (A) No-load excitation current (/) 0,/0, 0,8/0,2 0,79/0.1 0,7/0,49 0,7/0,49 0,71/0,46 0,78/0, 0,77/0, ic (A) On-load excitation current (/) 2,66/1,74 2,63/1,72 2,71/1,77 2,36/1,4 2,66/1,73 2,68/1,7 2,86/1,86 3,13/2,04 uc (V) On-load excitation voltage (/) 18,9/29,6 18,7/29,2 19,1/29,9 16,6/26 18,6/29,1 18,6/29 19,6/,6 21/32,8 ms Response time ( U = % transient) < 00ms < 00ms < 00ms < 00ms < 00ms < 00ms < 00ms < 00ms kva Start ( U = % cont. or ( U = % trans.) 1,7 6 67, , kva Start ( U = % cont. or ( U = % trans.) 60, 6, 79,2 7,6 7,6 121,1 134, 161, % Transient U (on-load 4/4) - P.F.: 0.8 LAG < 18% < 18% < 18% < 18% < 18% < 18% < 18% < 18% % Transient U (on-load 4/4) - P.F.: 0.8 LAG < 18% < 18% < 18% < 18% < 18% < 18% < 18% < 18% W No-load losses W Heat dissipation

5 Transient voltage variation 400 V - 0 Hz Phase loading () Phase loading ( & PMG) % VS1 VS2 VS3 S4 S % VS1 VS2 VS3 S4 S kva kva Load shedding () Load shedding ( & PMG) VS1 VS2 VS3 S4 S VS1 VS2 VS3 S4 S kva kva kva at PFØ 0.8 Motor starting () Motor starting ( & PMG) VS1 VS2 VS3 S4 S VS1 VS2 VS3 S4 S 14% kVA 4.8 locked rotor kva at PF Ø kVA locked rotor kva at PF Ø ) For a PF with a Ø other than 0.6, multiply the kva by K = Sin Ø / 0.8 Example of calculation for a PF with a Ø other than 0.6: motor starting kva calculated at PF Ø 0.4 = 40 kva Sin Ø 0.4 = K = 1.14 corrected kva = 4.8 kva Corresponding voltage drop for = 14 %. 2 ) For a voltage U other than 400 V ( Y ), 2 V ( ) at 0 Hz, multiply the kva by (400/U) 2 or (2/U) 2.

6 Efficiencies 60 Hz ( P.F. : 0.8 ) (... P.F. : 1 ) 88. LSA 42.3 VS LSA 42.3 S LSA 42.3 VS LSA LSA 42.3 VS LSA LSA 42.3 S LSA kva Reactances (%). Time constants (ms) - Class H/4 V VS1 VS2 VS3 S4 S Kcc Short-circuit ratio 0,2 0,49 0,4 0,44 0,44 0,46 0,4 0,47 Xd Direct-axis synchro. reactance unsaturated Xq Quadrature-axis synchro. reactance unsaturated T do No-load transient time constant X d Direct-axis transient reactance saturated 1, 16,0 17, ,0 16,2 14,,9 T d Short-circuit transient time constant X d Direct-axis subtransient reactance saturated 7,7 8,0 8, , 8,1 7,2, T d Subtransient time constant X q Quadrature-axis subtransient reactance saturated 11,1 11, 12,4.6 12,1 11,,3 7,7 Xo Zero sequence reactance unsaturated X2 Negative sequence reactance saturated 9,40 9,74,3 9,29 9,82 8,74 6,8 Ta Armature time constant 7, 7, 7, 7, 7, 7, 7, 7, Other class H/4 V data io (A) No-load excitation current (/) 0,/0, 0,2/0,8 0,1/0,79 0,49/0,7 0,49/0,7 0,46/0,71 0,/0,77 0,/0,77 ic (A) On-load excitation current (/) 1,76/2,69 1,73/2,6 1,77/2,72 1,4/2,36 1,73/2,66 1,7/2,68 1,84/2,82 1,99/3,06 uc (V) On-load excitation voltage (/),2/19,3 29,7/19,3/19,4 26,4/16,9 29,4/18,8 29,/18,8,9/19,7 32,9/21,1 ms Response time ( U = % transient) < 00ms < 00ms < 00ms < 00ms < 00ms < 00ms < 00ms < 00ms kva Start ( U = % cont. or ( U = % trans.) 3,8 8,3 70, 9,8 9,8 7,8 119,8 143,8 kva Start ( U = % cont. or ( U = % trans.) 63,0 68,3 82, 112,1 112,1 126,1 140,2 168,2 % Transient U (on-load 4/4) - P.F.: 0.8 LAG < 18 % < 18 % < 18 % < 18 % < 18 % < 18 % < 18 % < 18 % % Transient U (on-load 4/4) - P.F.: 0.8 LAG < 18 % < 18 % < 18 % < 18 % < 18 % < 18 % < 18 % < 18 % W No-load losses W Heat dissipation

7 Transient voltage variation 4 V - 60 Hz Phase loading () Phase loading ( & PMG) % 2 VS1 VS2 VS3 S4 S % 2 VS1 VS2 VS3 S4 S kva kva Load shedding () Load shedding ( & PMG) VS1 VS2 VS3 S4 S VS1 VS2 VS3 S4 S kva kva Motor starting () Motor starting ( & PMG) VS1 VS2 VS3 S4 S VS1 VS2 VS3 S4 S 13% kVA 4.8 locked rotor kva at PF Ø kVA locked rotor kva at PF Ø ) For a PF with a Ø other than 0.6, multiply the kva by K = Sin Ø / 0.8 Example of calculation for a PF with a Ø other than 0.6: motor starting kva calculated at PF Ø 0.4 = 40 kva Sin Ø 0.4 = K = 1.14 corrected kva = 4.8 kva Corresponding voltage drop for = 13 %. 2 ) For a voltage U other than 4 V (Y), 277 V ( ), 240 V (YY) at 60 Hz, multiply the kva by (4/U) 2 or (277/U) 2 or (240/U) 2. 7

8 3-phase short-circuit curves at no load and rated speed (star connection Y) LSA 423 VS LSA 423 VS LSA 423 VS LSA 423 S Influence due to connection Curves shown are for star (Y) connection. For other connections, use the following multiplication factors: - Series delta : Current value x Parallel star : Current value x 2 8

9 3-phase short-circuit curves at no load and rated speed (star connection Y) 000 LSA 423 S LSA LSA LSA Influence due to short-circuit Curves are based on a three-phase short-circuit. For other types of short-circuit, use the following multiplication factors 3-phase 2-phase L/L 1-phase L/N Instantaneous (max.) Continuous Maximum duration (/PMG) sec. sec. 2 sec. 9

10 Single bearing dimensions LSA S.A.E. 3 L Ø Ø N AH Ø BX LB AH Ø P Ø N Ø BX Xg 3 2 L LB Optional PMG Ø 23 X Ø Y holes equid. over Ø U XBG Ø 11 holes equid. over Ø M 4 Access to Access to terminals AVR Cable outlet β Ø 64 H AIR OUTLET 112. C 78. AIR OUTLET 112. C AIR INLET Optional H = 22 A2 A1 Dimensions (mm) et and masses weight H = 1 (Standard) H = 22 (Option) Accouplement Coupling Type LSA 42.3 VS1 L 6 LB 03 Xg 237 Weight Masse (kg) 11 C 260 A1 7 A2 279 C 1, A1 400 A2 36 Flange Bride Flex Disque plate LSA 42.3 VS , /2 x x - LSA 42.3 VS , x x x LSA 42.3 S x x LSA 42.3 S /2 - x x LSA LSA LSA Flange Bride (mm) Flex Disque plate (mm) (mm) S.A.E. P N M XBG β S.A.E. BX U X Y AH / / Xr Torsional analysis data Ø 18 Ø 60 Lr Ø 41 Ø Centre of gravity: Xr (mm), Rotor length: Lr (mm), Weight: M (kg), Moment of inertia: J (kgm 2 ): (4J = MD 2 ) Disque S.A.E. 7 1/2 Disque S.A.E. 8 Disque S.A.E. Disque S.A.E. 11 1/2 TYPE Xr Lr M J Xr Lr M J Xr Lr M J Xr Lr M J LSA 42.3 VS LSA 42.3 VS LSA 42.3 VS LSA 42.3 S LSA 42.3 S LSA LSA LSA

11 Two bearing dimensions Ø 42 1 M16 hole 36 depth Ø Ø 48 k6 11 AIR OUTLET L LB 82 Xg C AIR INLET 137 4x2 M holes on Ø 381 at 12h and 3h/6h/9hours 4 Access to terminals Optional PMG Cable outlet Ø M12 hole 18 depth Access to the AVR Dimensions (mm) TYPE L LB C Xg Weight (kg) LSA 42.3 VS LSA 42.3 VS LSA 42.3 VS LSA 42.3 S LSA 42.3 S LSA LSA LSA Xr Torsional analysis data Ø 48 Ø 0 Ø 60 Lr Ø 41 Ø Centre of gravity: Xr (mm), Rotor length: Lr (mm), Weight: M (kg), Moment of inertia: J (kgm 2 ): (4J = MD 2 ) TYPE Xr Lr M J LSA 42.3 VS LSA 42.3 VS LSA 42.3 VS LSA 42.3 S LSA 42.3 S LSA LSA LSA

12 Contact

LSA 42.3 Low Voltage Alternators - 4 pole

LSA 42.3 Low Voltage Alternators - 4 pole 2 to 60 kva - 0 Hz / 31. to 7 kva - 60 Hz Electrical and mechanical data Specially adapted to applications The LSA 42.3 alternator is designed to be suitable for