NZQA registered unit standard 9506 version 5 Page 1 of 5. Conduct a sample analysis in a petrochemical laboratory

Size: px
Start display at page:

Download "NZQA registered unit standard 9506 version 5 Page 1 of 5. Conduct a sample analysis in a petrochemical laboratory"

Transcription

1 Page 1 of 5 Title Conduct a sample analysis in a petrochemical laboratory Level 4 Credits 6 Purpose This unit standard is for people employed in the petrochemical industry. People credited with this unit standard are, in a petrochemical laboratory, able to: identify documentation and explain the functions and use of equipment; prepare for sample analysis; analyse a sample; reinstate work area after analysing sample; and calculate and report test results. Classification Petrochemical Industry > Petrochemical Process and Product Management Available grade Achieved Explanatory notes 1 Performance of the outcomes of this unit standard must comply with relevant site requirements, International Accreditation New Zealand (IANZ) accreditation, and the following legislation and documentation: Hazardous Substances and New Organisms Act 1996; Health and Safety at Work Act 2015; Resource Management Act 1991; ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories; AS LAB C2 Specific Criteria for Accreditation Chemical Testing (IANZ, 2008) available at UOP Laboratory Test Methods (American Society of Test Methods, 2004), available at 2 This unit standard is intended for, but is not limited to, workplace assessment. While all evidence requirements must be met, it is noted that all range statements within this unit standard are indicative and dependent on enterprise and site specific equipment, procedures, and practices. 3 Definitions Primary data refers to first analysis results. Site requirements mean the site specific documented methods for performing work activities and include health, safety, environmental, and quality management They may refer to manuals, codes of practice, or policy statements.

2 Page 2 of 5 Outcomes and evidence requirements Outcome 1 Identify documentation and explain the functions and use of equipment in a petrochemical laboratory. 1.1 Workplace laboratory equipment is located and its use explained. preparation, filtration, crystallisation, precipitation. 1.2 Functions of workplace laboratory equipment are explained in accordance with site 1.3 Documentation and certification for laboratory processing equipment are identified. test certificates, certification, standards for safety, standards for inservice safety inspection and testing of equipment, identification tags, labels, IANZ accreditation. 1.4 Equipment status and general documentation are identified. manufacturer's information, equipment operating manuals, safety procedures, operating procedures, maintenance procedures, calibration. Outcome 2 Prepare for sample analysis in a petrochemical laboratory. 2.1 Documentation for the guidance and recording of the analysis is assembled in the work area before the procedure commences. 2.2 The area to be used for the analysis is selected to take account of factors which could affect the material to be analysed, the process of analysis, and any risks or hazards associated with the procedure. 2.3 The area is cleaned in accordance with site 2.4 Equipment is set up, having been cleaned, calibrated, and its status confirmed. 2.5 Materials and reagents to be used in the analysis are identified and obtained. 2.6 Any related services are identified as being available and ready for use prior to starting the analysis.

3 Page 3 of The sample is confirmed as being representative of the material being analysed. 2.8 Actions and responses to minimise hazards and loss of material, in the event of abnormal occurrences, are identified. safety data sheets, personal protective equipment, spill containment. Outcome 3 Analyse a sample in a petrochemical laboratory. 3.1 Materials are prepared and handled safely in accordance with site 3.2 The process of analysis is carried out using techniques that minimise risks, hazards, and contamination. Specific Criteria for Chemical Testing, General Requirements for the Competence of Testing and Calibration Laboratories, UOP Laboratory Test Methods. 3.3 Data relevant to the analysis are recorded in accordance with site 3.4 Data from the analysis meet site requirements for accuracy and precision. Outcome 4 Reinstate the work area after analysing sample in a petrochemical laboratory. 4.1 Following cleaning that completely removes all residues, equipment is left in a ready to use state and condition. 4.2 Equipment which is worn or damaged is identified, and replaced, repaired, or disposed of. 4.3 Materials used are clearly labelled and stored. 4.4 Waste materials are labelled and disposed of in accordance with site Outcome 5 Calculate and report test results in a petrochemical laboratory.

4 Page 4 of Corrections are made to primary data, where required. 5.2 Results are calculated from primary data to the required number of significant figures and decimal places. 5.3 Any deviations from the expected range of results are investigated and actions are taken to resolve them. 5.4 The report includes all relevant information in accordance with site 5.5 Outcomes of the analysis are reported in accordance with site Planned review date 31 December 2018 Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 6 February December 2018 Revision 2 3 August December 2018 Review 3 20 September December 2018 Review 4 20 February December 2018 Rollover and Revision 5 20 April 2017 N/A Consent and Moderation Requirements (CMR) reference 0079 This CMR can be accessed at Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMRs). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource

5 Page 5 of 5 Comments on this unit standard Please contact the standards@primaryito.ac.nz if you wish to suggest changes to the content of this unit standard.

NZQA registered unit standard 9537 version 5 Page 1 of 6. This unit standard applies to operational activities carried out on producing wellheads.

NZQA registered unit standard 9537 version 5 Page 1 of 6. This unit standard applies to operational activities carried out on producing wellheads. Page 1 of 6 Title Replace faulty petrochemical wellhead equipment Level 4 Credits 8 Purpose This unit standard applies to operational activities carried out on producing wellheads. People credited with

More information

NZQA registered unit standard 9536 version 5 Page 1 of 6. Undertake petrochemical wellhead maintenance activities under supervision

NZQA registered unit standard 9536 version 5 Page 1 of 6. Undertake petrochemical wellhead maintenance activities under supervision Page 1 of 6 Title Undertake petrochemical wellhead maintenance activities under supervision Level 3 Credits 4 Purpose This unit standard applies to operational activities carried out on producing wellheads.

More information

NZQA unit standard version 5 Page 1 of 5. Prepare for and perform chemical analysis using optical emission spectrometry equipment

NZQA unit standard version 5 Page 1 of 5. Prepare for and perform chemical analysis using optical emission spectrometry equipment Page 1 of 5 Title Prepare for and perform chemical analysis using optical emission spectrometry equipment Level 4 Credits 5 Purpose People credited with this unit standard are able to: identify documentation

More information

NZQA registered unit standard version 6 Page 1 of 5. Operate biological treatment systems for effluent water in an energy and chemical plant

NZQA registered unit standard version 6 Page 1 of 5. Operate biological treatment systems for effluent water in an energy and chemical plant Page 1 of 5 Title Operate biological treatment systems for effluent water in an energy and chemical plant Level 4 Credits 8 Purpose This unit standard is for people working as boiler operators and energy

More information

NZQA registered unit standard version 2 Page 1 of 5

NZQA registered unit standard version 2 Page 1 of 5 Page 1 of 5 Title Assess the optimisation of a drinking-water treatment plant, and describe critical control points Level 5 Credits 10 Purpose People credited with this unit standard are able to: assess

More information

NZQA registered unit standard version 1 Page 1 of 5. Develop, implement and review a HACCP application for a food processing operation

NZQA registered unit standard version 1 Page 1 of 5. Develop, implement and review a HACCP application for a food processing operation Page 1 of 5 Title Develop, implement and review a HACCP application for a food processing operation Level 5 Credits 20 Purpose This unit standard is for experienced people required to have in-depth knowledge

More information

NZQA registered unit standard version 4 Page 1 of 5

NZQA registered unit standard version 4 Page 1 of 5 Page 1 of 5 Title Operate systems for boiler feedwater treatment Level 4 Credits 15 Purpose This unit standard is for people working as boiler operators and energy and chemical process operators in an

More information

NZQA registered unit standard version 4 Page 1 of 6. Carry out acceptance, commissioning and maintenance tests on power transformers

NZQA registered unit standard version 4 Page 1 of 6. Carry out acceptance, commissioning and maintenance tests on power transformers Page 1 of 6 Title Carry out acceptance, commissioning and maintenance tests on power transformers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare to test power transformers

More information

NZQA registered unit standard 6405 version 8 Page 1 of 5. Determine advertising options for small business enterprises. Marketing > Generic Marketing

NZQA registered unit standard 6405 version 8 Page 1 of 5. Determine advertising options for small business enterprises. Marketing > Generic Marketing Page 1 of 5 Title Determine advertising options for small business enterprises Level 4 Credits 5 Purpose People credited with this unit standard are able to: identify business and marketing objectives,

More information

This unit standard is expiring

This unit standard is expiring Page 1 of 5 Title Apply intelligence analysis techniques to complete an intelligence product Level 5 Credits 15 Purpose People credited with this unit standard are able to: define the intelligence problem

More information

NZQA registered unit standard version 1 Page 1 of 5

NZQA registered unit standard version 1 Page 1 of 5 Page 1 of 5 Title Slice and package bread in a plant bakery Level 4 Credits 10 Purpose This unit standard is for people working or intending to work in a plant bakery as a baking tradesperson. People credited

More information

NZQA registered unit standard version 2 Page 1 of 5

NZQA registered unit standard version 2 Page 1 of 5 Page 1 of 5 Title Display products in the salon environment Level 2 Credits 3 Purpose This unit standard is for entry-level learners working and intending to work in a salon People credited with this unit

More information

NZQA registered unit standard version 2 Page 1 of 5. Complete pre-competition preparations as an official at a competitive sports event

NZQA registered unit standard version 2 Page 1 of 5. Complete pre-competition preparations as an official at a competitive sports event Page 1 of 5 Title Complete pre-competition preparations as an official at a competitive sports event Level 3 Credits 3 Purpose This unit standard is designed primarily for people seeking to further develop

More information

NZQA registered unit standard version 4 Page 1 of 5

NZQA registered unit standard version 4 Page 1 of 5 Page 1 of 5 Title Demonstrate the requirements for holding access permits for work on high voltage electrical lines, cables, and equipment Level 3 Credits 4 Purpose People credited with this unit standard

More information

NZQA registered unit standard version 5 Page 1 of 5. Manage hazard identification and control on plant and machinery

NZQA registered unit standard version 5 Page 1 of 5. Manage hazard identification and control on plant and machinery Page 1 of 5 Title Manage hazard identification and control on plant and machinery Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: hazards associated with plant and

More information

This unit standard is expiring

This unit standard is expiring Page 1 of 5 Title Prepare edible green bovine offal products for packaging Level 2 Credits 10 Purpose This entry level unit standard is for people who are employed in the offal department of meat processing

More information

NZQA Expiring unit standard 3885 version 8 Page 1 of 5. Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry

NZQA Expiring unit standard 3885 version 8 Page 1 of 5. Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry Page 1 of 5 Title Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry Level 2 Credits 4 Purpose This unit standard is for people who are at pre-employment level or

More information

NZQA registered unit standard 9184 version 6 Page 1 of 5

NZQA registered unit standard 9184 version 6 Page 1 of 5 Page 1 of 5 Title Erect and dismantle non-notifiable prefabricated frame scaffolding up to five metres in height Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate

More information

NZQA registered unit standard version 1 Page 1 of 5. Demonstrate and apply knowledge of maintenance plans for mechanical equipment and plant

NZQA registered unit standard version 1 Page 1 of 5. Demonstrate and apply knowledge of maintenance plans for mechanical equipment and plant Page 1 of 5 Title Demonstrate and apply knowledge of maintenance plans for mechanical equipment and plant Level 5 Credits 8 Purpose This unit standard is for people who carry out maintenance on mechanical

More information

NZQA registered unit standard version 3 Page 1 of 5

NZQA registered unit standard version 3 Page 1 of 5 Page 1 of 5 Title Apply occupational health and safety requirements in the road transport and logistics industry Level 5 Credits 8 Purpose This unit standard is designed for team leaders, despatchers,

More information

NZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident

NZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Page 1 of 5 Title Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: the interrelated

More information

NZQA registered unit standard 5555 version 6 Page 1 of 5

NZQA registered unit standard 5555 version 6 Page 1 of 5 Page 1 of 5 Title Arrange and manage a visitor conference Level 5 Credits 20 Purpose People credited with this unit standard are able to: plan operations for a visitor conference; manage monetary, human

More information

NZQA registered unit standard version 2 Page 1 of 5. Develop training and support programmes, and recruit, appoint, and manage CDEM volunteers

NZQA registered unit standard version 2 Page 1 of 5. Develop training and support programmes, and recruit, appoint, and manage CDEM volunteers Page 1 of 5 Title Develop training and support programmes, and recruit, appoint, and manage CDEM volunteers Level 5 Credits 6 Purpose This unit standard is intended for people who fulfil the role of a

More information

NZQA registered unit standard version 4 Page 1 of 5. Operate power-operated elevating work platforms (EWP) in an electricity supply environment

NZQA registered unit standard version 4 Page 1 of 5. Operate power-operated elevating work platforms (EWP) in an electricity supply environment Page 1 of 5 Title Operate power-operated elevating work platforms (EWP) in an electricity supply environment Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge

More information

NZQA registered unit standard version 4 Page 1 of 5

NZQA registered unit standard version 4 Page 1 of 5 Page 1 of 5 Title Formulate event management strategies and coordinate event management services for a public relations event Level 6 Credits 10 Purpose This unit standard is for people who have, or seek

More information

NZQA registered unit standard version 3 Page 1 of 5. Install high voltage (HV) electricity network overhead conductors

NZQA registered unit standard version 3 Page 1 of 5. Install high voltage (HV) electricity network overhead conductors Page 1 of 5 Title Install high voltage (HV) electricity network overhead conductors Level 4 Credits 8 Purpose People credited with this unit standard are able to: interpret scope of work for installing

More information

NZQA registered unit standard version 1 Page 1 of 5. Identify and inspect road safety barrier systems on Infrastructure Works sites

NZQA registered unit standard version 1 Page 1 of 5. Identify and inspect road safety barrier systems on Infrastructure Works sites Page 1 of 5 Title Identify and inspect road safety barrier systems on Infrastructure Works sites Level 4 Credits 10 Purpose People credited with this unit standard are able to: identify and explain road

More information

NZQA registered unit standard 2930 version 5 Page 1 of 5

NZQA registered unit standard 2930 version 5 Page 1 of 5 Page 1 of 5 Title Develop and coordinate marketing strategies Level 6 Credits 10 Purpose This unit standard is for people who have, or seek responsibility for, or provide advice for, developing the strategic

More information

NZQA registered unit standard 1512 version 8 Page 1 of 6

NZQA registered unit standard 1512 version 8 Page 1 of 6 Page 1 of 6 Title Supervise asphalt paving construction activities Level 4 Credits 18 Purpose This unit standard is designed for people working in the pavement surfacing industry, towards recognition of

More information

NZQA registered unit standard version 1 Page 1 of 5

NZQA registered unit standard version 1 Page 1 of 5 Page 1 of 5 Title Operate timber treatment plant Level 3 Credits 15 Purpose People credited with this unit standard are able to: manage hazards associated with operating and maintaining timber treatment

More information

NZQA registered unit standard version 1 Page 1 of 5. Diagnose and repair faulty electronic equipment to component level

NZQA registered unit standard version 1 Page 1 of 5. Diagnose and repair faulty electronic equipment to component level Page 1 of 5 Title Diagnose and repair faulty electronic equipment to component level Level 4 Credits 40 Purpose This unit standard is intended for electronics technicians who are responsible for the diagnosis

More information

NZQA registered unit standard version 4 Page 1 of 5. Carry out switching operations on metal clad switchgear

NZQA registered unit standard version 4 Page 1 of 5. Carry out switching operations on metal clad switchgear Page 1 of 5 Title Carry out switching operations on metal clad switchgear Level 4 Credits 3 Purpose People credited with this unit standard are able to: demonstrate knowledge of metal clad switchgear,

More information

NZQA registered unit standard version 7 Page 1 of 5. Demonstrate and apply knowledge of safeguards for use with portable electrical appliances

NZQA registered unit standard version 7 Page 1 of 5. Demonstrate and apply knowledge of safeguards for use with portable electrical appliances Page 1 of 5 Title Demonstrate and apply knowledge of safeguards for use with portable electrical appliances Level 2 Credits 3 Purpose This unit standard covers knowledge of safeguards used in conjunction

More information

NZQA registered unit standard version 2 Page 1 of 5. Describe drinking-water contaminants of public health significance

NZQA registered unit standard version 2 Page 1 of 5. Describe drinking-water contaminants of public health significance Page 1 of 5 Title Describe drinking-water contaminants of public health significance Level 4 Credits 8 Purpose People credited with this unit standard are able to describe: the relationship between drinking-water

More information

NZQA Expiring unit standard version 6 Page 1 of 5. Operate a clamshell die cutter in the corrugated packaging industry

NZQA Expiring unit standard version 6 Page 1 of 5. Operate a clamshell die cutter in the corrugated packaging industry Page 1 of 5 Title Operate a clamshell die cutter in the corrugated packaging industry Level 3 Credits 8 Purpose People credited with this unit standard are able to: plan ahead, to avoid delays during make

More information

NZQA registered unit standard version 1 Page 1 of 5

NZQA registered unit standard version 1 Page 1 of 5 Page 1 of 5 Title Analyse surface material and construction requirements and apply to developed kitchen or bathroom designs Level 5 Credits 10 Purpose This unit standard is for experienced people working

More information

NZQA registered unit standard version 1 Page 1 of 5. Interpret paving instructions and construct bituminous mix layers

NZQA registered unit standard version 1 Page 1 of 5. Interpret paving instructions and construct bituminous mix layers Page 1 of 5 Title Interpret paving instructions and construct bituminous mix layers Level 4 Credits 14 Purpose People credited with this unit standard are able to: interpret paving instructions for bituminous

More information

NZQA registered unit standard version 2 Page 1 of 5. Demonstrate knowledge of safety management systems for an aviation environment

NZQA registered unit standard version 2 Page 1 of 5. Demonstrate knowledge of safety management systems for an aviation environment Page 1 of 5 Title Demonstrate knowledge of safety management systems for an aviation environment Level 5 Credits 8 Purpose People credited with this unit standard are, for an aviation environment, able

More information

NZQA registered unit standard version 2 Page 1 of 5. Operate x-ray and electronic scanning equipment in a prison environment

NZQA registered unit standard version 2 Page 1 of 5. Operate x-ray and electronic scanning equipment in a prison environment Page 1 of 5 Title Operate x-ray and electronic scanning equipment in a prison environment Level 4 Credits 5 Purpose This unit standard is for people working as officers in a prison environment and covers

More information

NZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply advanced knowledge of power system engineering

NZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply advanced knowledge of power system engineering Page 1 of 5 Title Demonstrate and apply advanced knowledge of power system engineering Level 6 Credits 15 Purpose This unit standard covers knowledge of three-phase power systems with an emphasis on distribution

More information

NZQA Expiring unit standard version 2 Page 1 of 5. Demonstrate knowledge of liquid roof membrane systems

NZQA Expiring unit standard version 2 Page 1 of 5. Demonstrate knowledge of liquid roof membrane systems Page 1 of 5 Title Demonstrate knowledge of liquid roof membrane systems Level 2 Credits 6 Purpose People credited with this unit standard are able to demonstrate knowledge: of liquid roof membrane substrates

More information

NZQA registered unit standard version 3 Page 1 of 5. Carry out automated assembly of wood packaging products

NZQA registered unit standard version 3 Page 1 of 5. Carry out automated assembly of wood packaging products Page 1 of 5 Title Carry out automated assembly of wood packaging products Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge of the health and safety issues

More information

NZQA registered unit standard version 3 Page 1 of 5

NZQA registered unit standard version 3 Page 1 of 5 Page 1 of 5 Title Demonstrate and apply knowledge of safe welding principles and quality assurance under supervision Level 2 Credits 4 Purpose This unit standard is for the training of mechanical engineering

More information

NZQA registered unit standard version 2 Page 1 of 5. Generate chlorine dioxide for wood pulp bleaching

NZQA registered unit standard version 2 Page 1 of 5. Generate chlorine dioxide for wood pulp bleaching Page 1 of 5 Title Generate chlorine dioxide for wood pulp bleaching Level 5 Credits 15 Purpose People credited with this unit standard are able to: explain fundamentals of chlorine dioxide generation;

More information

NZQA registered unit standard version 1 Page 1 of 5. Construction Trades > Painting and Decorating

NZQA registered unit standard version 1 Page 1 of 5. Construction Trades > Painting and Decorating Page 1 of 5 Title Apply advanced decorative paint finishes Level 5 Credits 20 Purpose This specialist unit standard is for people working in the painting area of the painting and decorating sector. People

More information

NZQA registered unit standard version 3 Page 1 of 5. Infrastructure Works > Civil Plant Operation

NZQA registered unit standard version 3 Page 1 of 5. Infrastructure Works > Civil Plant Operation Page 1 of 5 Title Operate a motor grader for earthworks Level 3 Credits 20 Purpose People credited with this unit standard are able to: prepare for grader operations; manoeuvre and control grader on site;

More information

NZQA registered unit standard version 5 Page 1 of 5. Make and repair a boat cockpit canopy and side curtains

NZQA registered unit standard version 5 Page 1 of 5. Make and repair a boat cockpit canopy and side curtains Page 1 of 5 Title Make and repair a boat cockpit canopy and side curtains Level 4 Credits 10 Purpose This unit standard is for people who work in the industrial textile fabrication industry. People credited

More information

NZQA registered unit standard version 5 Page 1 of 5. Carry out the functions of the poleman on a cable harvesting landing

NZQA registered unit standard version 5 Page 1 of 5. Carry out the functions of the poleman on a cable harvesting landing Page 1 of 5 Title Carry out the functions of the poleman on a cable harvesting landing Level 3 Credits 10 Purpose This unit standard is intended for people employed as a poleman in a cable harvesting operation.

More information

NZQA Expiring unit standard version 2 Page 1 of 5. Describe roof membrane preparation and installation procedures

NZQA Expiring unit standard version 2 Page 1 of 5. Describe roof membrane preparation and installation procedures Page 1 of 5 Title Describe roof membrane preparation and installation procedures Level 3 Credits 10 Purpose People credited with this unit standard are able to describe: project planning activities; plywood

More information

NZQA registered unit standard version 3 Page 1 of 5

NZQA registered unit standard version 3 Page 1 of 5 Page 1 of 5 Title Operate the drill rig for horizontal directional drilling Level 3 Credits 15 Purpose People credited with this unit standard are able to: care for and maintain horizontal directional

More information

NZQA registered unit standard version 3 Page 1 of 5

NZQA registered unit standard version 3 Page 1 of 5 Page 1 of 5 Title Carry out carpet repairs and reinstallation Level 3 Credits 8 Purpose This unit standard is for people training for the carpet cleaning industry. People credited with this standard are

More information

NZQA registered unit standard version 1 Page 1 of 6. Operate a bitumen distributor for blending and applying bituminous binders

NZQA registered unit standard version 1 Page 1 of 6. Operate a bitumen distributor for blending and applying bituminous binders Page 1 of 6 Title Operate a bitumen distributor for blending and applying bituminous binders Level 4 Credits 22 Purpose * Classification People credited with this unit standard are able to: plan and prepare

More information

PUBLIC SECTOR SERVICE DELIVERY Establish client needs and gain agreement on requirements for public sector service delivery

PUBLIC SECTOR SERVICE DELIVERY Establish client needs and gain agreement on requirements for public sector service delivery 1 of 5 level: 6 credit: 15 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard

More information

NZQA registered unit standard version 5 Page 1 of 6. Operate hydro-electric generating plant from enterprise control room

NZQA registered unit standard version 5 Page 1 of 6. Operate hydro-electric generating plant from enterprise control room Page 1 of 6 Title Operate hydro-electric generating plant from enterprise control room Level 6 Credits 16 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles

More information

NZQA registered unit standard version 2 Page 1 of 5. Create appointments and maintain appointment systems and records in the salon environment

NZQA registered unit standard version 2 Page 1 of 5. Create appointments and maintain appointment systems and records in the salon environment Page 1 of 5 Title Create appointments and maintain appointment systems and records in the salon environment Level 3 Credits 5 Purpose This is a practically based unit standard for people who create and

More information

ELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and servicing on high voltage minimum oil circuit breakers

ELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and servicing on high voltage minimum oil circuit breakers 1 of 9 level: 4 credit: 6 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for inspection, testing

More information

NZQA registered unit standard version 4 Page 1 of 5

NZQA registered unit standard version 4 Page 1 of 5 Page 1 of 5 Title Describe drinking-water supply reticulation systems Level 5 Credits 8 Purpose People credited with this unit standard are able to describe: the reticulated services found on public and

More information

NZQA registered unit standard Version 1 Page 1 of 5. Demonstrate operational knowledge of the law in a regulatory compliance context

NZQA registered unit standard Version 1 Page 1 of 5. Demonstrate operational knowledge of the law in a regulatory compliance context Page 1 of 5 Title Demonstrate operational knowledge of the law in a regulatory compliance context Level 4 Credits 12 Purpose People credited with this unit standard are able to: demonstrate knowledge of

More information

NZQA registered unit standard 6945 version 7 Page 1 of 5. Forestry > Forest Mechanised Harvesting

NZQA registered unit standard 6945 version 7 Page 1 of 5. Forestry > Forest Mechanised Harvesting Page 1 of 5 Title Fell trees using a mechanised harvesting machine Level 4 Credits 20 Purpose This unit standard is intended for people employed in a mechanised tree felling role in a forestry harvesting

More information

NZQA Expiring unit standard 2272 version 8 Page 1 of 5

NZQA Expiring unit standard 2272 version 8 Page 1 of 5 Page 1 of 5 Title Print single colour work on a reel-fed printing press Level 3 Credits 20 Purpose People credited with this unit standard are able to: demonstrate knowledge of factors affecting printing

More information

NZQA registered unit standard version 1 Page 1 of 5. Demonstrate knowledge of roof membrane systems

NZQA registered unit standard version 1 Page 1 of 5. Demonstrate knowledge of roof membrane systems Page 1 of 5 Title Demonstrate knowledge of roof membrane systems Level 3 Credits 6 Purpose This unit standard is intended for use in the training and assessment of people carrying out the installation

More information

NZQA Expiring unit standard version 2 Page 1 of 5. Describe metal roof and wall cladding preparation and installation procedures

NZQA Expiring unit standard version 2 Page 1 of 5. Describe metal roof and wall cladding preparation and installation procedures Page 1 of 5 Title Describe metal roof and wall cladding preparation and installation procedures Level 3 Credits 10 Purpose People credited with this unit standard are able to describe: the planning and

More information

NZQA Expiring unit standard version 4 Page 1 of 5. Prepare and operate automated bread slicing and packaging equipment

NZQA Expiring unit standard version 4 Page 1 of 5. Prepare and operate automated bread slicing and packaging equipment Page 1 of 5 Title Prepare and operate automated bread slicing and packaging equipment Level 3 Credits 5 Purpose This unit standard is for people who are currently working, or intend to work, in jobs which

More information

NZQA unit standard version 2 Page 1 of 5. Demonstrate understanding of a HACCP application in a food processing operation

NZQA unit standard version 2 Page 1 of 5. Demonstrate understanding of a HACCP application in a food processing operation Page 1 of 5 Title Demonstrate understanding of a HACCP application in a food processing operation Level 4 Credits 10 Purpose This unit standard is for experienced operators and others required to have

More information

NZQA registered unit standard version 2 Page 1 of 5

NZQA registered unit standard version 2 Page 1 of 5 Page 1 of 5 Title Describe the preparation of, set up, and simultaneously operate, a multi-winch crane during crane operations Level 4 Credits 6 Purpose People credited with this unit standard are able

More information

PUBLIC SECTOR SERVICE DELIVERY Develop public sector service delivery objectives, and implement systems to meet client needs

PUBLIC SECTOR SERVICE DELIVERY Develop public sector service delivery objectives, and implement systems to meet client needs 1 of 5 level: 7 credit: 20 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard

More information

NZQA registered unit standard version 2 Page 1 of 6. Demonstrate professional and ethical behaviour as an engineering technician

NZQA registered unit standard version 2 Page 1 of 6. Demonstrate professional and ethical behaviour as an engineering technician Page 1 of 6 Title Demonstrate professional and ethical behaviour as an engineering technician Level 6 Credits 15 Purpose This unit standard is intended for people working towards the New Zealand Diploma

More information

NZQA unit standard version 3 Page 1 of 5. Inspect export forest products for phytosanitary contamination as a site inspector

NZQA unit standard version 3 Page 1 of 5. Inspect export forest products for phytosanitary contamination as a site inspector Page 1 of 5 Title Inspect export forest products for phytosanitary contamination as a site inspector Level 5 Credits 10 Purpose This unit standard is for people working, or intending to work as a site

More information

NZQA registered unit standard version 6 Page 1 of 5

NZQA registered unit standard version 6 Page 1 of 5 Page 1 of 5 Title Demonstrate knowledge of circuit protection Level 3 Credits 3 Purpose This unit standard is for electricians and related trades who need to understand and select devices for the protection

More information

NZQA registered unit standard version 2 Page 1 of 5. Apply design principles in the design of scaffolding

NZQA registered unit standard version 2 Page 1 of 5. Apply design principles in the design of scaffolding Page 1 of 5 Title Apply design principles in the design of scaffolding Level 5 Credits 12 Purpose This unit standard is for people who have intermediate scaffolding skills and who want to develop their

More information

Control pests by fumigation in the urban pest management industry

Control pests by fumigation in the urban pest management industry Page 1 of 5 Control pests by fumigation in the urban pest management industry Level 4 Credits 15 Purpose This is a specialist unit standard for people training for the urban pest management industry. People

More information

NZQA Expiring unit standard version 2 Page 1 of 5. Install and maintain water mains and water supply systems and reticulation

NZQA Expiring unit standard version 2 Page 1 of 5. Install and maintain water mains and water supply systems and reticulation Page 1 of 5 Title Install and maintain water mains and water supply systems and reticulation Level 4 Credits 8 Purpose This unit standard is for people who work in the plumbing industry. People credited

More information

NZQA Expiring unit standard 3713 version 7 Page 1 of 6. Print single colour work on a sheet-fed registering offset press

NZQA Expiring unit standard 3713 version 7 Page 1 of 6. Print single colour work on a sheet-fed registering offset press Page 1 of 6 Title Print single colour work on a sheet-fed registering offset press Level 3 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of factors affecting

More information

NZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of costs to the pricing of a road transport service

NZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of costs to the pricing of a road transport service Page 1 of 5 Title Demonstrate and apply knowledge of costs to the pricing of a road transport service Level 5 Credits 7 Purpose This unit standard is intended for people who are required to prepare quotes

More information

ELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and service on oil filled distribution power transformers 11kV to 400V

ELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and service on oil filled distribution power transformers 11kV to 400V 1 of 8 level: 4 credit: 8 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for routine service transformers

More information

NZQA registered unit standard version 1 Page 1 of 6. Demonstrate knowledge of managing conflict situations in a security context

NZQA registered unit standard version 1 Page 1 of 6. Demonstrate knowledge of managing conflict situations in a security context Page 1 of 6 Title Demonstrate knowledge of managing conflict situations in a security context Level 2 Credits 4 Purpose This unit standard covers knowledge of conflict management for security personnel.

More information

NZQA registered unit standard version 1 Page 1 of 5. Demonstrate knowledge of equipment and processes for constructing slurry surfacings

NZQA registered unit standard version 1 Page 1 of 5. Demonstrate knowledge of equipment and processes for constructing slurry surfacings Page 1 of 5 Title Demonstrate knowledge of equipment and processes for constructing slurry surfacings Level 4 Credits 6 Purpose People credited with this unit standard are able to demonstrate knowledge

More information

NZQA Expiring unit standard 2117 version 5 Page 1 of 5. Install, test, and maintain water supply backflow prevention devices

NZQA Expiring unit standard 2117 version 5 Page 1 of 5. Install, test, and maintain water supply backflow prevention devices Page 1 of 5 Title Install, test, and maintain water supply backflow prevention devices Level 4 Credits 11 Purpose This unit standard is for people who work in the plumbing industry. People credited with

More information

NZQA Expiring unit standard version 6 Page 1 of 5. Conduct prisoner and security searches in a prison environment

NZQA Expiring unit standard version 6 Page 1 of 5. Conduct prisoner and security searches in a prison environment Page 1 of 5 Title Conduct prisoner and security searches in a prison environment Level 4 Credits 6 Purpose This unit standard is for people working as officers in a prison environment and covers conducting

More information

NZQA registered unit standard 3846 version 7 Page 1 of 7. Maintain commercial refrigeration and/or air conditioning systems

NZQA registered unit standard 3846 version 7 Page 1 of 7. Maintain commercial refrigeration and/or air conditioning systems Page 1 of 7 Title Maintain commercial refrigeration and/or air conditioning systems Level 3 Credits 20 Purpose This unit standard is for people who work in the refrigeration and air conditioning sector

More information

NZQA Expiring unit standard version 4 Page 1 of 7. Make ready a flat bed die cutter in the corrugated packaging industry

NZQA Expiring unit standard version 4 Page 1 of 7. Make ready a flat bed die cutter in the corrugated packaging industry Page 1 of 7 Title Make ready a flat bed die cutter in the corrugated packaging industry Level 3 Credits 25 Purpose People credited with this unit standard are able to: set up a hopper for a flat bed die

More information

NZQA registered unit standard version 1 Page 1 of 5

NZQA registered unit standard version 1 Page 1 of 5 Page 1 of 5 Title Demonstrate knowledge of Micro-Hydro Systems Level 4 Credits 15 Purpose This unit standard is for people who work with renewable energy systems and covers knowledge of the design and

More information

NZQA registered unit standard 3851 version 7 Page 1 of 5. Service commercial refrigeration and/or air conditioning systems

NZQA registered unit standard 3851 version 7 Page 1 of 5. Service commercial refrigeration and/or air conditioning systems Page 1 of 5 Title Service commercial refrigeration and/or air conditioning systems Level 4 Credits 20 Purpose This unit standard is for people who work in the refrigeration and air conditioning sector

More information

Carry out routine inspection and servicing on high voltage bulk oil circuit breakers

Carry out routine inspection and servicing on high voltage bulk oil circuit breakers Page 1 of 6 Carry out routine inspection and servicing on high voltage bulk oil circuit breakers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare for inspection, testing

More information

Explain foot and mouth disease controls in the processing of milk in the dairy industry

Explain foot and mouth disease controls in the processing of milk in the dairy industry Page 1 of 5 Explain foot and mouth disease controls in the processing of milk in the dairy industry Level 3 Credits 4 Purpose People credited with this unit are able to: explain the features and characteristics

More information

NZQA registered unit standard version 2 Page 1 of 5. Use a mini-crawler crane with outriggers to lift and place regular loads

NZQA registered unit standard version 2 Page 1 of 5. Use a mini-crawler crane with outriggers to lift and place regular loads Page 1 of 5 Title Use a mini-crawler crane with outriggers to lift and place regular loads Level 3 Credits 15 Purpose People credited with this unit standard are able to: prepare to lift and place regular

More information

POULTRY HATCHERY Process day-old poultry chicks

POULTRY HATCHERY Process day-old poultry chicks 1 of 5 level: 3 credit: 10 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Poultry Production People credited with this unit standard

More information

NZQA registered unit standard 6973 version 7 Page 1 of 5. Prune plantation trees with a chainsaw from the ground

NZQA registered unit standard 6973 version 7 Page 1 of 5. Prune plantation trees with a chainsaw from the ground Page 1 of 5 Title Prune plantation trees with a chainsaw from the ground Level 3 Credits 10 Purpose This unit standard is intended for people employed in a pruning role in a commercial forestry operation.

More information

NZQA registered unit standard version 5 Page 1 of 5

NZQA registered unit standard version 5 Page 1 of 5 Page 1 of 5 Title Demonstrate knowledge of the prevention and management of Discomfort, Pain and Injury (DPI) in the workplace Level 3 Credits 8 Purpose This unit standard is for people involved in the

More information

Meet Approved Handler requirements for the transport of bulk hazardous substances by road

Meet Approved Handler requirements for the transport of bulk hazardous substances by road Meet Approved Handler requirements for the transport of bulk hazardous substances by road 25986 version 1 Page 1 of 5 Level 4 Credits 6 Purpose This unit standard is for the drivers of road transport vehicles

More information

NZQA registered unit standard version 4 Page 1 of 5. Forestry > Tree Felling

NZQA registered unit standard version 4 Page 1 of 5. Forestry > Tree Felling Page 1 of 5 Title Fell trees safely using a chainsaw Level 3 Credits 10 Purpose People completing this unit standard will have the skills required to safely fell individual trees using basic techniques.

More information

Carry out acceptance and maintenance tests on distance protection relays

Carry out acceptance and maintenance tests on distance protection relays Page 1 of 5 Carry out acceptance and maintenance tests on distance protection relays Level 5 Credits 4 Purpose People credited with this unit standard are able to: prepare for acceptance and maintenance

More information

NZQA registered unit standard 4884 version 7 Page 1 of 5. Recruit, induct, and manage volunteers in a recreation organisation

NZQA registered unit standard 4884 version 7 Page 1 of 5. Recruit, induct, and manage volunteers in a recreation organisation Page 1 of 5 Title Recruit, induct, and manage volunteers in a recreation organisation Level 5 Credits 6 Purpose This unit standard is intended for a person working in a recreation facility in a supervisory

More information

Carry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus

Carry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus Page 1 of 7 Carry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus Level 4 Credits 4 Purpose People credited with this unit standard are able to: prepare for

More information

Carry out routine inspection and servicing on substation emergency services

Carry out routine inspection and servicing on substation emergency services Page 1 of 6 Carry out routine inspection and servicing on substation emergency services Level 3 Credits 4 Purpose People credited with this unit standard are able to: prepare for inspection and servicing

More information

NZQA registered unit standard version 1 Page 1 of 5

NZQA registered unit standard version 1 Page 1 of 5 Page 1 of 5 Title Demonstrate knowledge of electric lighting systems Level 3 Credits 6 Purpose This unit standard covers knowledge of electric lighting for electricians and related trades. People credited

More information

NZQA registered unit standard version 2 Page 1 of 5. Select and use tools and workshop equipment in the industrial textile fabrication industry

NZQA registered unit standard version 2 Page 1 of 5. Select and use tools and workshop equipment in the industrial textile fabrication industry Page 1 of 5 Title Select and use tools and workshop equipment in the industrial textile fabrication industry Level 3 Credits 6 Purpose This unit standard is for people entering or working in the industrial

More information

Outline New Zealand Greenshell mussel (kutai, kuku) farming

Outline New Zealand Greenshell mussel (kutai, kuku) farming Outline New Zealand Greenshell mussel (kutai, kuku) farming 16337 version 3 Page 1 of 5 Level 2 Credits 10 Purpose People credited with this unit standard are able to: identify the Greenshell mussel; describe

More information

NZQA registered unit standard version 6 Page 1 of 6

NZQA registered unit standard version 6 Page 1 of 6 Page 1 of 6 Title Operate hydro-electric generating plant on site Level 4 Credits 8 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles of hydro-electric

More information

NZQA registered unit standard version 1 Page 1 of 5. Determine and describe construction of medium and large buildings

NZQA registered unit standard version 1 Page 1 of 5. Determine and describe construction of medium and large buildings Page 1 of 5 Title Determine and describe construction of medium and large buildings Level 6 Credits 20 Purpose People credited with this unit standard are able to, for medium and large buildings, determine

More information