Instruction number PTI-16-03/09/06/A

Size: px
Start display at page:

Download "Instruction number PTI-16-03/09/06/A"

Transcription

1 Instruction number PTI-16-03/09/06/A MANUFACTURER OF ELECTRONIC WEIGHING INSTRUMENTS RADWAG Radom Bracka 28 Street Phone , phone/fax Selling department

2 September

3 Contents 1. APPROPIATION KEYBOARD KEYS FUNCTIONS TURN ON AND SERVICE WEIGHING MULTI-RANGE BALANCE TARE AND SETTING TO ZERO COOPERATION WITH LABELS PRINTER WEIGHING WITH AVERAGE RESULT <AUE> DEGREE OF FILTER <FIL> SETT-UP SPEED OF TRANSMISSION <bod> COUNTING PIECES WITH THE SAME MASS CONTROL +/- ACCORDING TO MASS OF MEASUREMENT STANDARD <StEPS> CALIBRATION (option) SETT-UP KIND OF WORK RS 232 (manual/ automatic work) <repl> CONSTANCE TRANSMISSION ADDITIONAL WEIGHTS <Add> DEFINITE SENT DATA AS STABLE/NOT STABLE <StAb> AUTOZERO FUNCTION AUTOMATIC TURN BALANCE OFF MEASUREMENT OF MAXIMUM POWER OF PRESSURE ON PAN [N] ( THUMBLOCK ) PROJECTION OF SUPPLY VOLTAGE OF SCALE <SuPP > MEASUREMENT IN LB UNITS COOPERATION WITH PRINTER COOPERATION WITH COMPUTER ORDERS ABOUT ERRORS LIST OF ORDERS IN SCALE PREPARATION TO WORK TECHNICAL PARAMETERS

4 1. APPROPIATION Scales are appropriate for fast and precise measurements. Setting to tare in all measure range enables to define net mass of weighed loads. Softwares of scales enable to make two ranges scales. Additional dot in down part of display signals moving into second range of weighing. Additional functions of the scale: Sum functions <Add> Weighing with average the result of weighing <AUE> Degree of filter <FIL> Counting pieces <PIECE> Control +/- in relation to mass of defined model <StEPS> Calibration < calibr> (only for not verified scales) Automatic or manual printout <repl> Possibility of printout unstable results <STAB> (Option for not verified scales) Weighing loading with ON autozero set - <Auto> (Option for not verified scales) Measurement of max power of pressure on a pan [N] or max mass which lays on the pan [g] or [kg] ( thumblock ) <top> (Option for not verified scales) Measurement in,,lb Checking voltage in supplying scale <SuPP> Cooperation with Eltron label printer printout results measurements on any printer that cooperates with computer (RS232) with following possibilities sett-up speed of transmission in range of bit/s <bod> automatic or manual printout <repl> Possibility of printout unstable results <StAb> (Option for not verified scales) - 4 -

5 2. KEYBOARD balance in mode working parts counting", Set deviation % of weighing product regarding mass master; Measurement in lb Measurement of max power of pressure on a pan [N] or max mass which lays on the pan [g] or [kg] ( thumblock ) balance in mode "weighing" Readout equal exact zero, stable measurement result, Tara was used, balance in second range of weighing, balance in triple range of weighing, - 5 -

6 Weighing result below I threshold Weighing result between threshold Weighing result above II threshold 3. KEYS FUNCTIONS Button Function Turn on/off display Set-up functions Send informations by RS joint Set-up to zero Tare scale Attention: After press F key all functions of each key are changed for time of sett-up functions. Way of how to use them is described in further part of instruction

7 4. TURN ON AND SERVICE Unpack balance, put balance on stable flat ground far from sources of heat. Level balance by means of regulation legs and level (in basic under scale) and install scale. To get level indication (bubble of air is central position) turn regulation legs. Put the plug of supplier on to socket, press key ON/OFF and wait until test of scale is finished. Indication of 0 mass appears on display: 1 balance shows precise zero 2 stable result of measurement 3 balance in weighing mode balance is ready to work COOPERATION WITH ZR-01 SUPPLIER. Operating conditions are signalized by two LED s: green LED red LED Operating procedure blinking shining Battery pack has been charged shining Switched off charging, connected to the mains Switched off blinking Norma operation without charging (disconnected from the mains) Switched off shining Battery pack discharged (connect to the mains) shining shining Battery fuse blown (inside the indicator) Switched off Switched off Scale switched off - 7 -

8 5. WEIGHING Put load on the scale. Time of stabilization is about 3s MULTI-RANGE BALANCE For the balances made as dual range version all functions and possibilities of setting are accessible the same as for one range balances. Switching between ranges is done automatically without operator s interference. Marking for weighing in the II measuring range is in the upper part of the display. Procedure of the multi-range balance If the load is increased on the pan the load is weighed with accuracy for I sub range. If the limit is exceeded switching between accuracies is done automatically the load is weighed with II sub range accuracy. Return to weighing in I sub range accuracy is possible if there is no load on the pan and the balance show precise zero

9 6. TARE AND SETTING TO ZERO To define net mass put container on scale and after stabilization - press TARE (mass indication returns to zero, sing appears on display). Net mass appears on display after putting load on scale. Tara can be done many times in all measure range of scale. It s not allowed to exceed max measure range. After taking load and container off summary of tared mass with minus sign appears on display. Setting to zero Setting stage of display to zero is possible only in range to ± 2% of max capacity of balance. If this value is higher than ±2% of max capacity display shows order <UAL 4>. Setting to zero is possible only with stable stages on display. Setting to zero is the same as defining new zero point which is precise zero for scale

10 7. COOPERATION WITH LABELS PRINTER Connect the balance with KDU keyboard and connect the keyboard to the printer. Press the F button. EL appears on the display of the balance. Press the PRINT button. Display show state for this function. Press the PRINT button again. The EL function has 1 value. To confirm press the F button. Select the label from the KDU keyboard to print. This label must have designed one variable (16 signs) with characteristics When Printed (during printout). Put the load on the pan and press the PRINT button on the overlay. On the display of the KDU keyboard order with question how many labels should be printed appears. Introduce the value and press the ENTER button on the KDU

11 8. WEIGHING WITH AVERAGE RESULT <AUE> Result of weighing from few measurements is presented as average. It s help full when conditions of work are not stable (vibrations, waves). To get result of measurement with assumed precision it s necessary to use digital filter with higher stage. Procedure: press F key repeatedly, till AUE appears on display press PRINT key or one of following number which is equivalent chosen amount of average 1 - average I result of digital filter stage 2 - average II result of digital filter stage 3 - average III result of digital filter stage 4 - average IV result of digital filter stage 5 - average V result press F key to confirm choice. Balance return to weighing. Notice: Increase stage of average makes times of weighing longer. 9. DEGREE OF FILTER <FIL> In order to make operation of balance comfortable parameter of setting size of filter is introduced in additionally. This parameter has influence on stability of result depending on conditions in place of usage. Procedure: Press F key many times until order FIL appears on display: By pressing PRINT key choose one of following numbers that refers to chosen step of average: 1 I step of filter 2 II step of filter 3 III step of filter 4 IV step of filter Press F key to confirm the choice. Balance return to weighing. Notice: Increase of step of filter causes extension of time

12 10. SETT-UP SPEED OF TRANSMISSION <bod> External mechanism connected to socket RS 232 has to be supplied from common net f.eg. with common protection against shock (lack of difference of electric potencial on conductors of balance and attached mechanism). Parameters of transmission recorded in balance Speed of transmission bit / s Data bits - 8 Stop bit - 1 Control of parity - lack. Value shown on balance display can be sent to external mechanism by connection in one of three ways: Manually after press PRINT key Automatically after stabilization enunciators For request of external mechanism see additional functions List of orders balance - computer. Value on display can be sent by connection as: stable start sending information after stabilization result of weighing not stable Way of setting speed of transmission: Press F key repeatedly until order bod appears on display Press PRINT key repeatedly until number of chosen speed of transmission appears on display bod bit / s, bod bit / s, bod bit / s, bod bit / s, bod bit / s, bod bit / s, Confirm by pressing F key

13 11. COUNTING PIECES WITH THE SAME MASS Scale in standard made is provided with option of counting small pieces with the same mass. Function of counting pieces doesn t work with other functions of scale. To use this function: Put package on scale and tare its mass to balance memory - TARE, appears sing NET on display, near description Net. There will be small elements put into the box. Put as many elements to scale as many we declare as batch quanta in package Press F key until order PIECE appears on display Press key PRINT to start set up batch quantity Press F key - choose value (you can select from 10, 20, 50pcs or free definable) If you want to start the counting pieces function, please choose one of the values, eg. 20 pcs and press PRINT key

14 After displaying of LoAd information, please put on the pan of the balance as many pieces as have been chosen (20pcs). If option Free was chosen, the display will show the number of pieces with flashing of the first digit you should inscribe as many pieces are in the mass pattern set up batch quantity by means of keys TARE choose digit PRINT choose value

15 confirm by pressing key F - LOAD appears on display after making sure that batch with declared quantity is put on scale confirm by key PRINT once again - balance displays Process, and then amount of elements and PCS. after adding or take counted elements off scale their amount appear on display Return to weighing mode press key F many times until - PIECES appears on display press TARE key Balance return to weighing mode and diode with kg or lb mark starts flashing Attention: 1. If you choose batch quantity remember that precision of counting depends on metrological parameters of balance and on repeatability of mass singular counted elements. 2. Result of measurement is more precise if batch quantity is bigger 3. If summary mass of batch quantity is less than 5 reading divisions (5d) balance shows order about error -LO- and return to weighing automatically

16 12. CONTROL +/- ACCORDING TO MASS OF MEASUREMENT STANDARD <StEPS> Software of the balance enables to check mass of weighed load in reference to defined range of tolerance. Control +/- doens t cooperate with other functions of balance. Procedure: press F key repeatedly, till StEPS appears on display press PRINT key to start programming value of threshold TARE choose digital PRINT - choose value of digital F confirm settled value TARE - choose digital PRINT - choose value of digital F - confirm settled value From now additional annunciators appear on display: When mass of load on scale is lower than down limit of settled range If mass of load on scale is between programmed values of range

17 When mass of load on scale is bigger than upper limit of defined range ATTENTION: If the limits of range are sett-up in wrong way (value of down limit is bigger than value of upper limit of range) balance shows order about error -LH- and returns to weighing mode. Return to weighing mode: press F key repeatedly till order StEPS appears on display press TARE key 13. CALIBRATION (option) To assure very precise weighing introduce correction factor to balance memory it s calibration. Scales have system of external calibration. Procedure press F key repeatedly, until Calibr appears on display press PRINT key to activate calibration function following order appears on display

18 order put calibration weight with defined mass on scale press PRINT key following order appears on display when calibration is finished display will show Take calibration weight off scale Notice: 1. Take the load off the pan before the calibration 2. Calibrate the balance with the mass presented on the display 3. if user does not follow the instruction in p.2 the balance can be damaged

19 14. SETT-UP KIND OF WORK RS 232 (manual/ automatic work) <repl> Procedure: Press F key many times until order repl appears on display Press PRINT key many times until one of orders appears on display: repl 0 manual work (after pressing PRINT key) repl 1 automatic work (after stabilization result of weighing) Confirm by pressing F key. 15. CONSTANCE TRANSMISSION Turn on and turn off the continuous procedure is possible with suitable commands sent to balance from the computer through RS 232 (see the commands balance-computer, point 24). Procedure for keyboard scale many times press F, on a display you will see: Pr_c with key PRINT chose one of two possibilities: Pr_c 0 (manual printouts) Pr_c 1 (continuous work) approve with F

20 16. ADDITIONAL WEIGHTS <Add> This function is used to add weights made in sequence with possibility of print particular weight and total summary. PROCEDURE: - Press the F button until the Add appears on the display - Press the PRINT button - Settled value of the parameter 0 appears - Press the PRINT button again the set the value for 1 - Press the F button - The software returns to weighing with using function ADDITION (at the left side of the display P appears) - Put first load on the pan - After stabilization press the PRINT button, sum of weights will be displayed (the r at the left side of the display), result of weighing is printed on the connected. - Take the load off the pan, the balance returns to ZERO and the P letter at the left side of the display - Put following load on the pan

21 - After stabilization of the result press the PRINT button, balance shows sum of the first and the second weights and result of the second weight is printed on the connected printer - To finish addition of weights press the PRINT button at the moment of displaying total, sum of all recorded weights on the printer and the balance return to mode of basic weighing automatically (function Add is set up for the 0 value). - To use this function again repeat the procedure as described above. Notice: If the range of displaying mass is exceeded the balance shows the F letter at the left side of LED display. In this case set the display to zero and repeat the procedure of addition. Pay attention not to exceed the display range. Return to weighing mode: - Press the F button repeatedly until command Add appears on the display - Press PRINT button and set Add 0 - Confirm by pressing F key 17. DEFINITE SENT DATA AS STABLE/NOT STABLE <StAb> (Option for not verified scales) Procedure: Press F key repeatedly until order Stab appears on display. by means of PRINT key start programming functions by key F choose one of two values STAB 0 sending stable result of weighing STAB 1 - sending temporary result of weighing Confirm by key PRINT

22 18. AUTOZERO FUNCTION (Option for not verified scales) To have precise readouts from balance we have function AUTOZERO. This function is to control and correct zero of balance showings thanks to this measuring always begins from exact zero. There are special cases when this function disturb when measuring. For example when putting very slowly loading on the pan. Correction set of showing zero, can correct also readouts of real mass of loading. In this case there is possibility to block this function. Procedure: many times press F, on a display you will see: AUTO with key PRINT chose one of two possibilities: approve with F. AUTO 0 (function AUTOZERO ON) AUTO 1 (function AUTOZERO OFF) 19. AUTOMATIC TURN BALANCE OFF This function is necessary to save-up the battery. The scale switches off if no weighing is done during last 5 minutes (function t1 = 0). This function can be switched off if it disturbs in work or if the supply is before. Procedure: - press the F button until command t1 appears on the display

23 - press the PRINT button to select one of two values: t1 0 - function Automatic turn off is active (for battery and accumulator work) t1 1 - function Automatic turn off is not active (recommended for net work) - to confirm press the F button 20. MEASUREMENT OF MAXIMUM POWER OF PRESSURE ON PAN [N] ( THUMBLOCK ) (Option for not verified scales) Procedure: many times press F, and the display shows : top pressing PRINT, choose setting: top 1 balance in work mode measurement maximum power or mass, top 0 balance in work mode in kg (g) approve with F Approving choice with top 1 is displaying sign Max on the top of the display if readout is different than zero, two times press TARE, put on a pan changable power - on a display will be snapped max value of power before next measurement pres two times TARE. Come back to weighing: many times press F, display shows: top pressing PRINT, choose setting: top 0 approve with F

24 21. PROJECTION OF SUPPLY VOLTAGE OF SCALE <SuPP > Checking supply voltage on main board of balance. Voltage is shown in Volts. Procedure: Press F key repeatedly until order SuPP appears on display Activate monitoring of supply voltage by PRINT key To return to weighing press F key 22. MEASUREMENT IN LB UNITS Procedure: many times press F, display shows: lb press PRINT, choose setting: lb 1 (balance in work mode in [LB]), lb 0 (balance in mode work in kg). approve with F. 23. COOPERATION WITH PRINTER Every press PRINT key makes sending signal to printer. Signal refers to actual state of display with measurement units (if balance has RS 232 joint installed). Depending on setting parameter StAb it can be printout of stable or temporary value. Depending on setting parameter repl printout can be automatic or manual. One of thermal printers KAFKA series can cooperate with every balance: KAFKA Printout of result of weighing with measure units is possible KAFKA 1/Z This printer has internal clock of real time. Time and date can be printed after connect printer to supply net

25 23.3. KAFKA SQ S There are clock of real time and possibility to make statistics measurement in this sprinter. Statistics contains: Batch quantity, Summary of mass all samples, average value, standard deviation, variation factor, min value, max value, difference in max - min 24. COOPERATION WITH COMPUTER Sending results of weighing to computer can be done: manually after pressing PRINT key automatically after stabilization result of weighing (If repl 1 and balance was in autozero zone before put load on the scale) For demand of computer see list of orders in RADWAG scales 25. ORDERS ABOUT ERRORS NULL - range of A/D converter performance is over passed from below FULL 1 - range of A/D converter performance is over passed from above FULL-2 - range of weighing is over passed - LH - - start mass is over passed (at the moment of turning balance on) ± 10% of max range of weighing VAL 4 - setting to zero outside range of ± 2% max mass in relation to start mass -VAL - tare negative value

26 26. LIST OF ORDERS IN SCALE Function Format Appropriation - TARA (when TARE was pressed) - T CR LF - setting to zero Function - ZERO (key 0 was pressed on) Format - Z CR LF Appropriation - setting to zero. Function - automatic work starts (function repl on value 1) Format - S0 CR LF Appropriation - sending this order to balance makes setting function repl on value 1. Function - automatic work is stopped (function repl on value 0) Format - S1 CR LF Appropriation - sending this order sett-up function repl on value 0. Function Format Appropriation Function Format Destiny Function Format Destiny - PRINT ( PRINT was pressed on) - S I CR LF - sending this order to balance makes return sending contain of display register. - CONTINOUS TRANSMISSION - C1 CR LF - Start continuous transmission. - CONTINOUS TRANSMISSION - C0 CR LF - End of continuous transmission If FULL2 is shown on display balance in place of contains sends S + CR LF. If order with error or which is not in register but finished with CR LF balance send return order E S CR LF. Attention! Spaces in formats should be omitted. They are to makes readable better

27 27. PREPARATION TO WORK One load cell platform scales Take the scale off the package, then put the balance in the place of usage on flat and stable ground far from the sources of heating. Levelling the scale To do the measurements correctly level the scale. Take the pan off carefully (without rapid pulls and hits) and turn the legs in order to level the balance. After leveling the scale put the pan on the base of the scale. 28. TECHNICAL PARAMETERS Type: WTC 15/30/60 C2/K WTC 30/60/150 C2/K WTC 15/30/60 C3/K WTC 30/60/150 C3/K Maximum capacity 15/30/60 kg 30/60/150 kg 15/30/60 kg 30/60/150 kg Readability 5/10/20 g 10/20/50 g 5/10/20 g 10/20/50 g Tare range -60 kg -150 kg -60 kg -150 kg Pan size mm mm Temp. work C Protection Power Display IP 65 konstrukcja, IP 66/67 miernik 230V AC, 50Hz LED Instruction number PTI-16-03/09/06/A

28 MANUFACTURER OF ELECTRONIC WEIGHING INSTRUMENTS RADWAG Radom Bracka 28 Street POLAND Central phone , phone/fax Sales Department

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! "#$%&'()*+,+-.) "*/)($)% Contents 1. Application...3 2. Structure And Principle Of Operation...4 3. Key Description...5 4. Unpacking And Setting Up The Moisture Analyzer...6 5. Turn Moisture Balance On...7

More information

MANUAL JCE-SERIES CHAPTER

MANUAL JCE-SERIES CHAPTER MANUAL JCE-SERIES CHAPTER 1 INTRODUCTION ------------------------------ 1 2 ASSEMBLY ------------------------------ 2 3 INSTALLATION ------------------------------ 2 4 PRECAUTION ------------------------------

More information

BALANCES APP/2C SERIES

BALANCES APP/2C SERIES User manual no.: LMI-53-05/11/12/A BALANCES APP/2C SERIES MANUFACTURER OF ELECTRONIC WEIGHING INSTRUMENTS RADWAG 26 600 Radom, Bracka 28, POLAND phone +48 48 38 48 800, fax. +48 48 385 00 10 e-mail: export@radwag.com

More information

PALLET SCALE CPS SERIES OWNER'S MANUAL

PALLET SCALE CPS SERIES OWNER'S MANUAL PALLET SCALE CPS SERIES OWNER'S MANUAL Table of Contents 1. PREFACE 3 2. OVERALL VIEW 4 3. SPECIFICATIONS 5 4. DIMENSIONS 5 5. FRONT PANEL 6 6. RS-232C (OPTION) 8 7. OPERATIONS 10 8. HOW TO CHARGE 12 9.

More information

User s Guide. Weighing Indicator WIDRA - HF L / HF S 2000/02/11 21:21:58. No. TARE NET GROSS TOTAL

User s Guide. Weighing Indicator WIDRA - HF L / HF S 2000/02/11 21:21:58. No. TARE NET GROSS TOTAL - 9-2000/02/11 21:21:58 No. TARE NET GROSS TOTAL ----------------------------------------------- 001 0.000U1 0.034U1 0.034U1 0.034U1 DATE 2000/02/11 TIME 21:26:56 NO. 001 TARE 0.000kg NET 0.076kg GROSS

More information

Exceed IRELAND Electronic Postage Computing Scale

Exceed IRELAND Electronic Postage Computing Scale Exceed IRELAND Electronic Postage Computing Scale OPERATING MANUAL CONTENTS INTRODUCTION Specifications Preparing the scale for use Operating the Exceed postal scale KEYBOARD FUNCTIONS Basic services Special

More information

INSTRUCTION MANUAL CONTECH

INSTRUCTION MANUAL CONTECH INSTRUCTION MANUAL CONTECH PRICE COMPUTING SCALES EL-221, MIDC Electronic Zone, Mhape, Navi Mumbai-400701. Tel: 27618366 / 74 PRICE COMPUTING SCALES INTRODUCTION Contech CT series PRICE COMPUTING SCALES

More information

CN Series P.N , Software rev. T 8, Revision A1- July 2014

CN Series P.N , Software rev. T 8, Revision A1- July 2014 Adam Equipment CN Series P.N. 7.00.6.6.0199, Software rev. T 8, Revision A1- July 2014 Adam Equipment 2014 Adam Equipment 2014 CONTENTS 1.0 INTRODUCTION... 2 2.0 SPECIFICATIONS... 3 2.1 DISPLAY AND KEYPAD...

More information

BEFORE USING THE COUNTING SCALE

BEFORE USING THE COUNTING SCALE π H-1114, H-1115 H-1116, H-1117 INDUSTRIAL COUNTING SCALES 1-800-295-5510 uline.com WEIGH T UNIT WEIGH T lb/1000 Pc s u 1-800-295-5510 7 8 9 4 5 6 1 2 3 QTY UNIT PST UNIT PST ZERO TOTAL 0. CE TARE TOTAL

More information

Operator Manual. OHAUS Aviator 7000

Operator Manual. OHAUS Aviator 7000 Operator Manual OHAUS Aviator 7000 2 OHAUS Operator Manual Aviator 7000 Order number 72246392 Contents 1 Your new retail scale 5 1.1 Most important functions 5 1.2 Device overview 5 1.3 Safety instructions

More information

CONTENTS. 3-1 Unpacking and Checking Installing Components Leveling the Scale... 1

CONTENTS. 3-1 Unpacking and Checking Installing Components Leveling the Scale... 1 CONTENTS 1. Introduction... 1 2. Precautions... 1 3. Before Using the Product 3-1 Unpacking and Checking. 1 3-2 Installing Components.... 1 3-3 Leveling the Scale.... 1 4. Product Introduction 4-1 Specifications

More information

INSTALLATION uline.com UNPACKING ASSEMBLY LEVELING H-1096, H-1097 H-1098, H-1099 DELUXE COUNTING SCALE

INSTALLATION uline.com UNPACKING ASSEMBLY LEVELING H-1096, H-1097 H-1098, H-1099 DELUXE COUNTING SCALE π H-1096, H-1097 H-1098, H-1099 DELUXE COUNTING SCALE 1-800-295-5510 uline.com UNPACKING 1. Unpack and verify the following components have been included: Scale unit Instruction manual Weighing pan Power

More information

Professional Weighing Equipment. K-Series Scales. Operation Manual KHR 6000 KHR 123 KHR 502 KHR 3001

Professional Weighing Equipment. K-Series Scales. Operation Manual KHR 6000 KHR 123 KHR 502 KHR 3001 Professional Weighing Equipment K-Series Scales Operation Manual KHR 6000 KHR 123 KHR 502 KHR 3001 Table of Contents Section Page Declaration of Conformity 3 Customer Service 4 Introduction 5 Safety 6

More information

PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION

PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION Operation Manual BPS-C2-V2 Series LCD BALANCES PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com MRC.VER.01-12.13 1.

More information

Models TJ30K TJ15K TJ6K TJ3K. Resolution Ratio 1g 0.5g 0.2g 0.1g Calibration graduation 10d 10d 10d 10d

Models TJ30K TJ15K TJ6K TJ3K. Resolution Ratio 1g 0.5g 0.2g 0.1g Calibration graduation 10d 10d 10d 10d Operating Instruction Manual of TJ Series Electronic counting balance ( for following models: TJ3K,TJ6K,TJ15K,TJ30K,TJ3KA,TJ6KA,TJ15KA, TJ30KA) 1. Overview TJ series electronic counting weighing apparatus

More information

User Manual. XK315A1 water proof series Weighing Indicators. Applications: Electronic platform scale, weighing scale, etc.

User Manual. XK315A1 water proof series Weighing Indicators. Applications: Electronic platform scale, weighing scale, etc. User Manual XK315A1 water proof series Weighing Indicators Applications: Electronic platform scale, weighing scale, etc. 1 Introductions 1.1 Safety precautions WARNING! Don t use XK315A1 series indicators

More information

HX-Series. HX-502 (500g x 0.01g) HX-3001 (3000g x 0.1g. Copyright 2014 American Weigh Scales, Inc. All rights reserved. Rev. 1.0

HX-Series. HX-502 (500g x 0.01g) HX-3001 (3000g x 0.1g. Copyright 2014 American Weigh Scales, Inc. All rights reserved. Rev. 1.0 HX-Series HX-502 (500g x 0.01g) HX-3001 (3000g x 0.1g Copyright 2014 American Weigh Scales, Inc. All rights reserved. Rev. 1.0 Table of Contents Parts and Setup...1 Safety... 1 Service... 1 Unpacking...

More information

Table of Contents. 3-1 Unpacking and Checking Installing Components Leveling the Scale... 1

Table of Contents. 3-1 Unpacking and Checking Installing Components Leveling the Scale... 1 Table of Contents 1. Introduction.... 1 2. Precautions. 1 3. Before Using the Product 3-1 Unpacking and Checking. 1 3-2 Installing Components..... 1 3-3 Leveling the Scale..... 1 4. Product Introduction

More information

Best Selection for Your Business. Electronic Pricing Scale. User s Manual. (Model: TP-31)

Best Selection for Your Business. Electronic Pricing Scale. User s Manual. (Model: TP-31) Best Selection for Your Business Electronic Pricing Scale User s Manual (Model: TP-31) CATALOG 1. Foreword... 2 1.1. Introductions... 2 1.2. Main functions and features... 2 1.3. Specification... 2 1.4.

More information

MEDIZINTECHNIK FÜR TIERÄRZTE

MEDIZINTECHNIK FÜR TIERÄRZTE GB Tabel of contents: Operation Instructions Electronic Platfoorm Balances MEDIZINTECHNIK FÜR TIERÄRZTE 1 Technical data 17 2 Fundamental information (general) 18 2.1 Intended use 18 2.2 Inappropriate

More information

CSG A.L.C. COUNTING SCALE USER MANUAL

CSG A.L.C. COUNTING SCALE USER MANUAL CSG A.L.C. COUNTING SCALE USER MANUAL Completely re-written for clarification By Neil White CONTENTS: Specifications User Information Keypad Functions Operation Troubleshooting SPECIFICATIONS Division

More information

Operating and Installation Instructions Display Unit

Operating and Installation Instructions Display Unit KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Phone: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating and Installation Instructions Display Unit

More information

Operating instructions Analytical balance

Operating instructions Analytical balance KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kernsohn.com Tel: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating instructions Analytical balance KERN ADB Type

More information

Operating Manual. Professional Weighing Equipment. TB Series intelligent weighing machine. Touch Color Screen HIGH RESOLUTION BALANCE

Operating Manual. Professional Weighing Equipment. TB Series intelligent weighing machine. Touch Color Screen HIGH RESOLUTION BALANCE Professional Weighing Equipment Operating Manual TB Series intelligent weighing machine Touch Color Screen HIGH RESOLUTION BALANCE 1 Introduction What you should know about these Operating Instructions:

More information

EC Series Toploading Balances

EC Series Toploading Balances EC Series Toploading Balances Digital Balance Operator s Manual Rev 1.01 June 2006 Software 2.11 Page: 1 CONTENTS INTRODUCTION... 3 SPECIFICATIONS... 4 TECHNICAL SPECIFICATIONS... 4 COMMON SPECIFICATIONS...

More information

Use and Maintenance Manual

Use and Maintenance Manual Compact Bench Piececounter for Internal Use C 100 Use and Maintenance Manual Code 81320222 DECLARATION OF CONFORMITY SOCIETA COOPERATIVA BILANCIAI Via S.Ferrari,16 41011 Campogalliano (MO) ITALIA We declare

More information

Inscale Measurement Technology Ltd Tel: Fax:

Inscale Measurement Technology Ltd Tel: Fax: TCC SERIES Inscale Measurement Technology Ltd 7 Heron Close, St. Leonards-on-Sea. East Sussex TN38 8DX United Kingdom Tel: +44(0)1424 200722 Fax: +44(0)1424 443976 Email: sales@inscale-scales.co.uk Http:www.inscale-scales.co.uk

More information

User Manual Cole-Parmer Symmetry Balances Analytical Balances: LA, LA.C, and LA.N Series Precision Toploading Balances: LT, LT.C, and LT.

User Manual Cole-Parmer Symmetry Balances Analytical Balances: LA, LA.C, and LA.N Series Precision Toploading Balances: LT, LT.C, and LT. User Manual Cole-Parmer Symmetry Balances Analytical Balances: LA, LA.C, and LA.N Series Precision Toploading Balances: LT, LT.C, and LT.N Series 05-01-18 REV04 1 2 1. GENERAL INFORMATION... 6 1.1 INTENDED

More information

Weighing Indicator YH-T3. User Manual

Weighing Indicator YH-T3. User Manual Weighing Indicator YH-T3 User Manual Content CHAPTER 1 MAIN SPECIFICATION......-2- CHAPTER 2 INSTALLATION......- 3-2.1 FRONT AND BACK VIEW OF INDICATOR... - 3-2.2 CONNECTING LOAD CELL TO INDICATOR...-

More information

Operator Manual. brite Advanced Retail scale

Operator Manual. brite Advanced Retail scale Operator Manual brite Advanced Retail scale 2 METTLER TOLEDO Operator Manual brite Advanced Order number 30209977 Contents 1 Your new retail scale 5 1.1 Most important functions 5 1.2 Device overview 5

More information

High Precision Balances. Operation Manual

High Precision Balances. Operation Manual High Precision Balances Operation Manual BN / CN-en, V5.1-2011 TABLE OF CONTENTS I. Overview ---------------------------------------- 1 II. Specifications and performance --------------- 1 III. Preparations

More information

BC Series Compact Counting Scale INSTRUCTION MANUAL

BC Series Compact Counting Scale INSTRUCTION MANUAL Compact Counting Scale INSTRUCTION MANUAL Ohaus Corporation, 19A Chapin Road, P.O. Box 2033, Pine Brook, NJ 07058, USA Declaration of Conformity We, Ohaus Corporation, declare under our sole responsibility

More information

X320 IP69K. Digital Indicator Operator Manual 003X M02

X320 IP69K. Digital Indicator Operator Manual 003X M02 X320 IP69K Digital Indicator Operator Manual 003X-610-100-M02 Copyright All Rights Reserved. No part of this document may be copied, reproduced, republished, uploaded, posted, transmitted, distributed,

More information

Manual PCE TP 1500B/3000B

Manual PCE TP 1500B/3000B www.pce-industrial-needs.com Tursdale Technical Services Ltd Unit N12B Tursdale Business Park Co. Durham DH6 5PG United Kingdom Phone: +44 ( 0 ) 191 377 3398 Fax: +44 ( 0 ) 191 377 3357 info@tursdaletechnicalservices.co.uk

More information

LC-VS 60 Operation Manual

LC-VS 60 Operation Manual LC-VS 60 Operation Manual Section Table of Contents Page Declaration of Conformity 3 Customer Service 4 Introduction 4 Safety 5 Features 6 Application & Conformity 6 Getting Started 7 Delivery 7 Application

More information

PORTION CONTROL SCALE

PORTION CONTROL SCALE PORTION CONTROL SCALE 22 pounds/352 ounces/10 kilograms by grams, ounces, troy ounces, pounds, Hong Kong tael, Taiwan tael, grains, pennyweights, mommes, tolas, carats and free factor units 1 Specification

More information

Operation Manual. Professional Weighing Equipment. MRW SERIES intelligent weighing scale. WASHDOWN WEIGHING SCALE - Dust and Waterproof Scale IP65

Operation Manual. Professional Weighing Equipment. MRW SERIES intelligent weighing scale. WASHDOWN WEIGHING SCALE - Dust and Waterproof Scale IP65 Professional Weighing Equipment MRW SERIES intelligent weighing scale WASHDOWN WEIGHING SCALE - Dust and Waterproof Scale IP65 WITH PIECE COUNTING FUNCTION Operation Manual Section Table of Contents Page

More information

Operation Manual. Dual Temperature Digital Dry Block Incubator. Catalog No. INCUBATOR Rev C. April 2016

Operation Manual. Dual Temperature Digital Dry Block Incubator. Catalog No. INCUBATOR Rev C. April 2016 Operation Manual Dual Temperature Digital Dry Block Incubator Catalog No. INCUBATOR2 Rev C. April 2016-1 - Thank you for your purchase. This manual contains operation information for the Dual Temperature

More information

KERN EMS Version /2012 GB

KERN EMS Version /2012 GB Instruction Manual School balance KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-mail:info@kern-sohn.com Tel: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com KERN EMS Version 1.3

More information

WeighSouth. WBT Toploader Balance

WeighSouth. WBT Toploader Balance WeighSouth WBT Toploader Balance Part List Balance...1 pc. Weighing Pan...1 pc. Draft Shield (Model WBT-100 only)...1 pc. Calibration Weight... WBT-100, WBT-602 AC Adapter...1 pc. Instruction Manual...1

More information

SE9000 Digital Weighing Indicator. User manual

SE9000 Digital Weighing Indicator. User manual SE9000 Digital Weighing Indicator User manual SE9000 Digital Weighing Indicator (Digital Sensor) 1) Brief introduction SE9000 digital weighing indicator consists of digital sensor and digital meter. Digital

More information

High Precision Balances

High Precision Balances CÔNG TY CỔ PHẦN CÂN ĐIỆN TỬ THỊNH PHÁT High Precision Balances Operation Manual KD- HBC-en, V5.0-2010 TABLE OF CONTENTS I. Overview ---------------------------------------- 1 II. Attentions ----------------------------------------

More information

BA110 Electronic Balance 5000g x 1g. Impact Test Equipment Ltd & User Guide. User Guide

BA110 Electronic Balance 5000g x 1g. Impact Test Equipment Ltd   &   User Guide. User Guide BA110 Electronic Balance 5000g x 1g Impact Test Equipment Ltd www.impact-test.co.uk & www.impact-test.com User Guide User Guide Impact Test Equipment Ltd. Building 21 Stevenston Ind. Est. Stevenston Ayrshire

More information

Adam Equipment ADK SERIES

Adam Equipment ADK SERIES Adam Equipment ADK SERIES (P.N. 2693, Revision F7, January 2006) @Adam Equipment Company 2006 1 CONTENTS 1.0 INTRODUCTION... 2 2.0 SPECIFICATIONS... 2 3.0 INSTALLATION... 3 3.1 UNPACKING YOUR BALANCE...

More information

Instruction Manual: AD Series

Instruction Manual: AD Series Instruction Manu ual: AD Series Table of Contents Chapter 1: Cautionary Notes and Warnings... 1 Chapter 2: Specifications... 3 Chapter 3: Parts Description... 4 Chapter 4: Keys, Display Indicators and

More information

OP-903 INDICATOR USER S MANUAL

OP-903 INDICATOR USER S MANUAL OP-903 INDICATOR USER S MANUAL Portable Static Weighing Indicator Selletonscales.com TABLE OF CONTENTS Safety Precautions 1 Preparations and Set Up 1 Features 2 Technical Parameters 2 Specifications 3

More information

LCD RADWAG BALANCES MANUFACTURER OF ELECTRONIC WEIGHING INSTRUMENTS. Number of instruction: IMMU ENG

LCD RADWAG BALANCES MANUFACTURER OF ELECTRONIC WEIGHING INSTRUMENTS. Number of instruction: IMMU ENG Number of instruction: IMMU-03-13-01-15-ENG LCD RADWAG BALANCES MANUFACTURER OF ELECTRONIC WEIGHING INSTRUMENTS RADWAG 26 600 Radom, 28 Bracka Street, POLAND Phone +048 48 38 48 800, fax +48 48 385 00

More information

Operation Manual. Professional Weighing Equipment. HRB Series intelligent weighing scale HRB 103 HRB 203 HRB 303 HRB 1002 HRB 602

Operation Manual. Professional Weighing Equipment. HRB Series intelligent weighing scale HRB 103 HRB 203 HRB 303 HRB 1002 HRB 602 Professional Weighing Equipment HRB Series intelligent weighing scale HIGH RESOLUTION BALANCE WITH COUNTING FUNCTION HRB 103 HRB 203 HRB 303 HRB 1002 HRB 602 Operation Manual Section Table of Contents

More information

User Manual Cole-Parmer Symmetry Balances Analytical Balances: LA and LA.C Series Precision Toploading Balances: LT and LT.

User Manual Cole-Parmer Symmetry Balances Analytical Balances: LA and LA.C Series Precision Toploading Balances: LT and LT. User Manual Cole-Parmer Symmetry Balances Analytical Balances: LA and LA.C Series Precision Toploading Balances: LT and LT.C Series 11-06-17 REV03 1. GENERAL INFORMATION... 6 1.1 INTENDED USE... 6 1.2

More information

Operation Manual. Professional Weighing Equipment. HRB Series intelligent weighing scale HIGH RESOLUTION BALANCE WITH COUNTING FUNCTION

Operation Manual. Professional Weighing Equipment. HRB Series intelligent weighing scale HIGH RESOLUTION BALANCE WITH COUNTING FUNCTION Professional Weighing Equipment HRB Series intelligent weighing scale HIGH RESOLUTION BALANCE WITH COUNTING FUNCTION HRB (-E) 3001 / 6001 / 10001 HRB (-E) 10001LP / 20001 Operation Manual Section Table

More information

Operation Manual INCUBATOR2 Dual Dry Block Incubator

Operation Manual INCUBATOR2 Dual Dry Block Incubator Operation Manual INCUBATOR2 Dual Dry Block Incubator Hygiena USA info@hygiena.com 805-388-8007 / 888-494-4362 Hygiena International enquiries@hygiena.net +44 0 1923 818821 Foreword Thank you for purchasing

More information

Instruction Manual: AGZN and AGCN Analytical Balances

Instruction Manual: AGZN and AGCN Analytical Balances Instruction Manual: AGZN and AGCN Analytical Balances Table of Contents Chapter 1: Cautionary Notes and Warnings... 1 Chapter 2: Specifications... 3 Chapter 3: Parts Description... 4 Chapter 4: Keys, Display

More information

EGT-AF08 USER GUIDE WHEEL WEIGHING SYSTEMS WITH VARIOUS PLATFORMS

EGT-AF08 USER GUIDE WHEEL WEIGHING SYSTEMS WITH VARIOUS PLATFORMS EGT-AF08 USER GUIDE WHEEL WEIGHING SYSTEMS WITH VARIOUS PLATFORMS Revision 1.00 Last update 01/02/2013 Page intentionally left blank. EGT-AF01 USER GUIDE Table of contents 1 INTRODUCTION... 5 2 TECHNICAL

More information

Pennsylvania Scale Company. Model 40SS Multi-Function Digital Indicator. Operation & Calibration Manual Software Version

Pennsylvania Scale Company. Model 40SS Multi-Function Digital Indicator. Operation & Calibration Manual Software Version Pennsylvania Scale Company Model 40SS Multi-Function Digital Indicator Operation & Calibration Manual Software Version 040.0.040 Pennsylvania Scale Company 1042 New Holland Avenue Lancaster PA 17601 For

More information

OPERATION MANUAL. Electronic Hanging Scale NINGBO AUDDA WEIGHING CO.,LTD

OPERATION MANUAL. Electronic Hanging Scale NINGBO AUDDA WEIGHING CO.,LTD OCS-A1 Electronic Hanging Scale OPERATION MANUAL NINGBO AUDDA WEIGHING CO.,LTD ADD:no.5, 75th nong, tanshu road (by the west side of electricity station), Ninghai, Ningbo TEL:0574-65231021 (China) 0574-65231022

More information

Operating instructions and installation information. METTLER TOLEDO MultiRange ID7-Form-XP application software

Operating instructions and installation information. METTLER TOLEDO MultiRange ID7-Form-XP application software T Operating instructions and installation information METTLER TOLEDO MultiRange ID7-Form-XP application software ID7-Form-XP Contents Contents Page 1 Introduction and assembly... 2 1.1 Introduction...

More information

User Manual. X2 SERIES BALANCES analytical balances AS X2 precision balances PS X2 precision balances APP X2

User Manual. X2 SERIES BALANCES analytical balances AS X2 precision balances PS X2 precision balances APP X2 User Manual User manual no.: IMMU-16-05-06-15-ENG X2 SERIES BALANCES analytical balances AS X2 precision balances PS X2 precision balances APP X2 RADWAG BALANCES AND SCALES RADWAG 26 600 Radom, 28 Bracka

More information

User Manual Cole-Parmer Symmetry Balances Analytical Balances: TA.C and TA Series Precision Toploading Balances: TT.

User Manual Cole-Parmer Symmetry Balances Analytical Balances: TA.C and TA Series Precision Toploading Balances: TT. User Manual Cole-Parmer Symmetry Balances Analytical Balances: TA.C and TA Series Precision Toploading Balances: TT.C and TT Series 1 01-26-18 REV03 2 Contents 1. GENERAL INFORMATION... 7 1.1 INTENDED

More information

S-5 Bulk Filler System

S-5 Bulk Filler System Logical Machines 1158 Roscoe Road Charlotte, Vermont 05445 802.425.2888 www.logicalmachines.com S-5 Bulk Filler System What is the Logical Machines S-5 The S-5 is used to fill containers with an operator

More information

User Manual TD-Series Balance Series

User Manual TD-Series Balance Series User Manual TD-Series Balance Series 01-16-17 REV03 1 2 Contents 1. GENERAL INFORMATION... 6 1.1 INTENDED USE... 6 1.2 PRECAUTIONS... 6 1.3 SUPERVISION OVER METROLOGICAL PARAMETERS... 6 1.4 WARRANTY CONDITIONS...

More information

Contents

Contents Fixing the Weighing Pan Protection Device Disassembly Steps Contents ---------------------------------------------------------------------- 1 ----------------------------------------------------------------------

More information

Splash-Proof Weighing Scale Operation Manual

Splash-Proof Weighing Scale Operation Manual Splash-Proof Weighing Scale Operation Manual JZC-AWED-en,V5.0-2008 Turn the scale on. When self-test shows 000000, press keys in order. Then press key to display Units Setting. The screen will show ON

More information

WS 10 Weighing indicator USER MANUAL

WS 10 Weighing indicator USER MANUAL WS 10 Weighing indicator USER MANUAL Edition:10052001A Safety Instruction For safety operation follow the safety instructions. WARNING Setting, Calibration Inspection and Maintain of the indicator is prohibited

More information

2% & (+ 2% PSI.

2% & (+ 2% PSI. Warning: If your vehicle has an engine that has spark plugs, be sure they are resistor type spark plugs or you may damage the memory chip of this unit. If the scale unit fails when the engine is running,

More information

User Manual. of WLY scales MANUFACTURER OF ELECTRONIC WEIGHING INSTRUMENTS. Manual number: ITKU A

User Manual. of WLY scales MANUFACTURER OF ELECTRONIC WEIGHING INSTRUMENTS. Manual number: ITKU A User Manual of WLY scales Manual number: ITKU-44-11-10-12-A MANUFACTURER OF ELECTRONIC WEIGHING INSTRUMENTS RADWAG Wagi Elektroniczne, 26 600 Radom, Bracka 28, POLAND Phone +48 48 38 48 800, fax. +48 48

More information

LOW PROFILE FLOOR SCALE

LOW PROFILE FLOOR SCALE π LOW PROFILE FLOOR SCALE 1-800-295-5510 uline.com SITE SELECTION Select a site for your new floor scale where it is least likely to be damaged by fork trucks and other material handling devices. Floor

More information

X2 Series Balances USER MANUAL. AS X2 Analytical Balances PS X2 Precision Balances APP X2 Precision Balances IMMU EN.

X2 Series Balances USER MANUAL. AS X2 Analytical Balances PS X2 Precision Balances APP X2 Precision Balances IMMU EN. X2 Series Balances AS X2 Analytical Balances PS X2 Precision Balances APP X2 Precision Balances USER MANUAL IMMU-16-14-02-16-EN www.radwag.com If you are reading this, it means that you are bound to achieve

More information

KERN KFS-TM Version GB

KERN KFS-TM Version GB KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Phone: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating and Installation Instructions Display Unit

More information

F3-200 Manual Precautions Before Using The Scale Scale Operation Notes

F3-200 Manual Precautions Before Using The Scale Scale Operation Notes F3-200 Manual Precautions Before Using The Scale The scale should always be used in an environment that is free from excessive air currents, corrosives, vibration, and temperature or humidity extremes.

More information

Operation Manual. Professional Weighing Equipment. MRB Series Mid Resolution Balances. MRB 500g MRB 1200g MRB 2500g MRB 6000g MRB 10000g

Operation Manual. Professional Weighing Equipment. MRB Series Mid Resolution Balances. MRB 500g MRB 1200g MRB 2500g MRB 6000g MRB 10000g Professional Weighing Equipment MRB Series Mid Resolution Balances Compact Scales MRB 500g MRB 1200g MRB 2500g MRB 6000g MRB 10000g Operation Manual Section Table of Contents Page Declaration of Conformity

More information

Professional Weighing Equipment REMO/REMO-R. Operation Manual

Professional Weighing Equipment REMO/REMO-R. Operation Manual Professional Weighing Equipment REMO/REMO-R Operation Manual Section Table of Contents Page Declaration of Conformity 3 Customer Service 4 Introduction 4 Safety 5 Weight Scale 6 Features 7 Interface Data

More information

PK-110. User Manual. American Weigh Scales. PK-110 (0-44lb x 0.05lb / lb x 0.1lb)

PK-110. User Manual. American Weigh Scales. PK-110 (0-44lb x 0.05lb / lb x 0.1lb) American Weigh Scales PK-110 User Manual PK-110 (0-44lb x 0.05lb / 44-110lb x 0.1lb) Copyright 2012 American Weigh Scales, Inc. All rights reserved. Rev. 1.1 PK-110 Manual Thank you for purchasing the

More information

Contents

Contents Fixing the Weighing Pan Protection Device Disassembly Steps Contents ---------------------------------------------------------------------- 1 ----------------------------------------------------------------------

More information

Professional Weighing Equipment !!!! Weigh Bars. Dust and Waterproof Scale IP65 !! 1

Professional Weighing Equipment !!!! Weigh Bars. Dust and Waterproof Scale IP65 !! 1 Weigh Bars Dust and Waterproof Scale IP65 Professional Weighing Equipment 1 Operating Manual Declaration of Conformity Declaration of conformity for apparatus with CE mark We hereby declare that the product

More information

Professional Weighing Equipment. Wheelchair Scale. Operating Manual LWC 800

Professional Weighing Equipment. Wheelchair Scale. Operating Manual LWC 800 Professional Weighing Equipment Wheelchair Scale Operating Manual LWC 800 Declaration of Conformity Declaration of conformity for apparatus with CE mark: We hereby declare that the product to which this

More information

Manual. AGRETO Hydraulic Scale AGRETO electronics GmbH

Manual. AGRETO Hydraulic Scale AGRETO electronics GmbH Manual AGRETO Hydraulic Scale 22.04.2014 AGRETO electronics GmbH Content 1 Introduction... 3 2 Scope of Delivery... 3 3 Intended Use... 3 4 Security... 4 4.1 Safety Instructions for the Buyer... 4 4.2

More information

Professional Weighing Equipment Digital Weight Indicator

Professional Weighing Equipment Digital Weight Indicator Professional Weighing Equipment Digital Weight Indicator TR-1-NK (WD) (2013 Version) Section Operation Manual Table of Contents Page Declaration of Conformity 3 Customer Service 4 Introduction 5 Safety

More information

Series. 3 or 12 lb. Capacity. 129 Cramer Road, Jewett, New York USA Fax:

Series. 3 or 12 lb. Capacity. 129 Cramer Road, Jewett, New York USA Fax: Installation and Operating Instructions Series 3 or 12 lb. Capacity The Perfect Counting Scale for Any Application Counting Weighing Ink Mixing Inventory Control Batching 129 Cramer Road, Jewett, New York

More information

Instruction Manual Counting balance

Instruction Manual Counting balance KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Phone +49-[0]7433-9933-0 Fax +49-[0]7433-9933-149 Internet: www.kern-sohn.com Instruction Manual Counting balance KERN CPB-N / CPB-DM

More information

VWR B-Series Balances Operation Manual

VWR B-Series Balances Operation Manual VWR B-Series Balances Operation Manual TABLE OF CONTENTS SAFETY PRECAUTIONS. 1 GETTING STARTED..... 1 INSTALLATION & SET-UP.... 2 POWER CONNECTION.... 3 ANTI-THEFT DEVICE.... 3 LEVELING.... 3 CALIBRATION.....

More information

MiniCD. User Manual. American Weigh Scales. MCD-100 (100 x 0.01g MCD-500 (500 x 0.1g)

MiniCD. User Manual. American Weigh Scales. MCD-100 (100 x 0.01g MCD-500 (500 x 0.1g) American Weigh Scales MiniCD User Manual MCD-100 (100 x 0.01g MCD-500 (500 x 0.1g) Copyright 2010 American Weigh Scales, Inc. All rights reserved. Rev. 2.0 MiniCD User Manual Thank you for purchasing the

More information

Professional Weighing Equipment. PIZA Series Bench Weighing Scale PIZA 12 PIZA 25. Operation Manual

Professional Weighing Equipment. PIZA Series Bench Weighing Scale PIZA 12 PIZA 25. Operation Manual Professional Weighing Equipment PIZA Series Bench Weighing Scale PIZA 12 PIZA 25 Operation Manual Section Table of Contents Page Declaration of Conformity 3 Customer Service 4 Introduction 5 Safety 6 Weight

More information

SERVICE MANUAL. Model: DS-425. Edition Month Year 1 st September nd December rd April th January 2002

SERVICE MANUAL. Model: DS-425. Edition Month Year 1 st September nd December rd April th January 2002 V1.0 SERVICE MANUAL Model: DS-425 Edition Month Year 1 st September 1998 2 nd December 1998 3 rd April 2001 4 th January 2002 Shanghai Teraoka Electronic Co., Ltd. --- Technical Service Dept. Ting Lin

More information

Operating manual Pallet scale

Operating manual Pallet scale KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Tel: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating manual Pallet scale KERN UIB Version 1.0

More information

Operating Manual. Professional Weighing Equipment SCT SERIES Small Counting Scales. SCT 600g SCT 1200g

Operating Manual. Professional Weighing Equipment SCT SERIES Small Counting Scales. SCT 600g SCT 1200g Professional Weighing Equipment SCT SERIES Small Counting Scales SMALL COUNTING SCALE WITH CHECK-WEIGHING FUNCTION Operating Manual SCT 600g SCT 1200g 1 Declaration of Conformity Declaration of conformity

More information

Professional Weighing Equipment DCT SERIES DUAL COUNTING SCALE. Operating Manual

Professional Weighing Equipment DCT SERIES DUAL COUNTING SCALE. Operating Manual Professional Weighing Equipment DCT SERIES DUAL COUNTING SCALE Operating Manual Table of Contents Section Page Declaration of Conformity 3 Customer Service 4 Introduction 5 Safety 6 Weight Scale 7 Functions

More information

Kilotech weighing scale KWS-CY. Owner s Manual V1.0

Kilotech weighing scale KWS-CY. Owner s Manual V1.0 Kilotech weighing scale KWS-CY Owner s Manual V1.0 Contents Subject to Change without Notice Kilotech Inc. USA 877-328-5988 CANADA 800-694-4445 1 CONTENT KWS-CY Operation & Service Manual 1. Specification...

More information

4 CONNECTION of L/C and JWI-586: 1 E+ 2 E- 3 S+ 4 S- 5 SHIELD LOAD CELL CONNECTION. 50k~500k ohm

4 CONNECTION of L/C and JWI-586: 1 E+ 2 E- 3 S+ 4 S- 5 SHIELD LOAD CELL CONNECTION. 50k~500k ohm Chapter 1 SUMMARY ------------------------------------- 1 2 INTRODUCTION ------------------------------------- 1 3 PRECAUTIONS ------------------------------------- 2 4 CONNECTION OF L/C AND JWI-586 -------------------------------------

More information

Operating manual Pallet truck scale

Operating manual Pallet truck scale Operating manual Pallet truck scale Jednoduchý paletový vozík s váhou KERN VHE-A(SK) KERN & Sohn GmbH Ziegelei 1 Phone: +49-[0]7433-9933-0 D-72336 Balingen Fax: +49-[0]7433-9933-149 E-Mail: info@kern-sohn.com

More information

Contents Balance-pan fixing

Contents Balance-pan fixing Contents Balance-pan fixing --------------------------------------------------- 1 Protection device --------------------------------------------------- 1 Installation mode ---------------------------------------------------

More information

Operating Manual. Professional Weighing Equipment. HRB Series intelligent weighing machine HIGH RESOLUTION BALANCE

Operating Manual. Professional Weighing Equipment. HRB Series intelligent weighing machine HIGH RESOLUTION BALANCE Professional Weighing Equipment HRB Series intelligent weighing machine HIGH RESOLUTION BALANCE HRB(-E) 103 HRB 602 / HRB 1002 HRB-E 602 / HRB-E 1002 Operating Manual 1 Declaration of Conformity Declaration

More information

Instruction Manual Counting balance

Instruction Manual Counting balance KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Phone +49-[0]7433-9933-0 Fax +49-[0]7433-9933-149 Internet: www.kern-sohn.com Instruction Manual Counting balance KERN CPB-N / CPB-DM

More information

OPERATION MANUAL. Model : DC-190 TERAOKA SEIKO CO., LTD. Edition Month Year October 1998

OPERATION MANUAL. Model : DC-190 TERAOKA SEIKO CO., LTD. Edition Month Year October 1998 OPERATION MANUAL Model : DC-190 Edition Month Year October 1998 TERAOKA SEIKO CO., LTD. 13-12 Kugahara 5-chome, Ohta-ku Tokyo 146 Japan TEL: +81-3-3752-2131 FAX: +81-3-3752-2801 CONTENTS 1. INTRODUCTION

More information

Operating instructions. METTLER TOLEDO MultiRange Application software IND690-FormXP.

Operating instructions. METTLER TOLEDO MultiRange Application software IND690-FormXP. Operating instructions METTLER TOLEDO MultiRange Application software IND690-FormXP www.mt.com/support Congratulations on choosing the quality and precision of METTLER TOLEDO. Proper use according to these

More information

Adam Equipment LBH SERIES. (P.N , Revision B2, January 2010)

Adam Equipment LBH SERIES. (P.N , Revision B2, January 2010) Adam Equipment LBH SERIES (P.N. 700660113, Revision B2, January 2010) Adam Equipment Company 2010 Easy Reference: Model name of the scale: Serial number of the unit: Software revision number (Displayed

More information

Operating Instructions Hanging Balance

Operating Instructions Hanging Balance KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Tel: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating Instructions Hanging Balance KERN CH Version

More information

iloader LTS On-Board Scale for Front Loader (User Manual)

iloader LTS On-Board Scale for Front Loader (User Manual) 1 iloader LTS On-Board Scale for Front Loader (User Manual) Istanbul, 2018 2 Contents 1. User Interface Summary...3 2. Installation and Wiring...5 3. Calibration (Commissioning)...8 4. Material and Customer

More information

Operating Instructions METTLER TOLEDO Excellence XS Precision Balances

Operating Instructions METTLER TOLEDO Excellence XS Precision Balances Operating Instructions METTLER TOLEDO Excellence XS Precision Balances www.mt.com/support Overview of your XS precision balance 6 5 7 10 11 8 6 6 4 3 2 1 10 3 3 11 11 6 1 Terminal (for details s. Section

More information

KERN KFB / KFN-TAM Version /2017 GB

KERN KFB / KFN-TAM Version /2017 GB KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@kern-sohn.com Phone: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Operating and Installation Instructions Display devices

More information

w w w. b a l a n c a s m a r q u e s. p t

w w w. b a l a n c a s m a r q u e s. p t U s e r G u i d e w w w. b a l a n c a s m a r q u e s. p t B M 3 0 0 P E S C A M CONTENTS PART 1 GENERAL CHARACTERISTICS... 2 EQUIPMENT DESCRIPTION... 2 WEIGHT INDICATOR DESCRIPTION... 2 KEYBOARD DESCRIPTION...

More information