Scope of Accreditation For Retlif Testing Laboratories
|
|
|
- Andrew Davis
- 6 years ago
- Views:
Transcription
1 Scope of Accreditation For Retlif Testing Laboratories 795 Marconi Avenue Ronkonkoma NY Robert Lenker x360 In recognition of a successful assessment to ISO/IEC 17025:2005 and the requirements of the LABPR 406 Electromagnetics Compatibility & Telecommunications Laboratory Accreditation Program (EMC & T LAP), accreditation is granted to Retlif Testing Laboratories to perform the following tests: Accreditation granted through: September 2, 2019 Testing Electrical - EMC / EMI Measurement of Radio-Noise Emissions From Low-Voltage Electrical and Electronic Equipment 9 khz to 18 GHz ANSI C63.4:2003 ANSI C63.4:2009 ANSI C63.4:2014 Testing - Mechanical Acceleration MIL-STD 202F (212A) MIL-STD 202G (212A) MIL-STD 750D (2006) MIL-STD 750E (2006) MIL-STD 810B (513) MIL-STD 810C (513.2) MIL-STD 810D (513.3) MIL-STD 810E (513.4) MIL-STD 810F (513.5) MIL-STD 810G (513.6) MIL-STD 883E (2001.2) MIL-STD 883F (2001.2) RTCA-DO 160C (7) RTCA-DO 160D (7) RTCA-DO 160E (7) RTCA-DO 160F (7) RTCA-DO 160G (7) Form 28.6 Revision 5 05/23/06 Page 1 of 8
2 Altitude / Barometric Pressure (Including Explosive Decompression) (up to ) ft (5X10E -6 ) MIL-STD 202F (105C) MIL-STD 202G (105C) MIL-STD 750D (1001.1) MIL-STD 750E (1001.2) MIL-STD 810B (500) MIL-STD 810C (500.1) MIL-STD 810D (500.2) MIL-STD 810E (500.3) MIL-STD 810F (500.4) MIL-STD 810G (500.5) MIL-STD 883E (1001) MIL-STD 883F (1001) RTCA-DO 160C (4) RTCA-DO 160D (4) RTCA-DO 160E (4) RTCA-DO 160F (4) RTCA-DO 160G (4) GR-63-CORE (4.1.3) High / Low Temperature Chamber Volumes: (up to 1 000) ft 3 (10 X 10 X 10 ) Temperature Range: (-200 to 1 200) ºC Transition Rate: (up to 20)ºC/Min MIL-STD 202F (108A) MIL-STD 202G (108A) MIL-STD 810B (501), (502) MIL-STD 810C (501.1), (502.1) MIL-STD 810D (501.2), (502.2) MIL-STD 810E (501.3), (502.3) MIL-STD 810F (501.4), (502.4) MIL-STD 810G (501.5), (502.5) MIL-STD 883E (1010.7) MIL-STD 883F (1010.8) RTCA-DO 160C (4), (5) RTCA-DO 160D (4), (5) RTCA-DO 160E (4), (5) RTCA-DO 160F (4), (5) RTCA-DO 160G (4), (5) EN EN GR-63-CORE ( ), ( ) IEC (8.2), (8.4) IEC IEC Lloyds Register 1996 (17), (18) SAE J1455 (4.1) Form 28.6 Revision 5 05/23/06 Page 2 of 8
3 Humidity / Moisture Resistance Shock Mechanical (2 to 98) % RH Force: (Up to ) lbf Waveforms: Half Sine, Sawtooth (Terminal Peak), Trapezoidal, Square Wave, Haversine, Triangle, SRS Maximum Level: (1 to 5 000) g s MIL-STD 202F (103B), (106F) MIL-STD 202G (103B), (106G) MIL-STD 750D (1021.2) MIL-STD 750E (1021.3) MIL-STD 810B (507) MIL-STD 810C (507.1) MIL-STD 810D (507.2) MIL-STD 810E (507.3) MIL-STD 810F (507.4) MIL-STD 810G (507.5) MIL-STD 883E (1004.7) MIL-STD 883F (1004.7) RTCA-DO 160C (6) RTCA-DO 160D (6) RTCA-DO 160E (6) RTCA-DO 160F (6) RTCA-DO 160G (6) EN GR-63-CORE ( ), (5.1.2) IEC (8.3) Lloyds Register 1996 (14), (15) SAE J1455 (4.2) MIL-STD 202F (207A), (213B) MIL-STD 202G (207B), (213B) MIL-STD 750D (2016.2) MIL-STD 750E (2016.2) MIL-STD 810B (516) MIL-STD 810C (516.2) MIL-STD 810D (516.3) MIL-STD 810E (516.4) MIL-STD 810F (516.5) MIL-STD 810G (516.6) MIL-S-901C MIL-S-901D MIL-STD 883E (2002.3), (2007.2), (2026) MIL-STD 883F (2002.4), (2007.3) (2026) RTCA-DO 160C (7) RTCA-DO 160D (7) RTCA-DO 160E (7) RTCA-DO 160F (7) RTCA-DO 160G (7) EN IEC (8.6) SAE J1455 (4.10) Form 28.6 Revision 5 05/23/06 Page 3 of 8
4 Shock Thermal High Temperature: (Up to 180) o C Low Temperature: (Down to -80) o C MIL-STD 202F (107G) MIL-STD 202G (107G) MIL-STD 750D (1051.5) MIL-STD 750E (1051.6) MIL-STD 810B (503) MIL-STD 810C (503.1) MIL-STD 810D (503.2) MIL-STD 810E (503.3) MIL-STD 810F (503.4) MIL-STD 810G (503.5) MIL-STD 883E (1011.9) MIL-STD 883F (1011.9) SAE J1445 ( ) Fungus Test Area: (up to 27) ft 3 (3 X 3 X 3 ) MIL-STD 810B (508) MIL-STD 810C (508.1) MIL-STD 810D (508.3) MIL-STD 810E (508.4) MIL-STD 810F (508.5) MIL-STD 810G (508.6) RTCA-DO 160C (13) RTCA-DO 160D (13) RTCA-DO 160E (13) RTCA-DO 160F (13) RTCA-DO 160G (13) Rain / Waterproofness (0 to 100) mph (0.2 to 10) in/hour MIL-STD 810B (506) MIL-STD 810C (506.1) MIL-STD 810D (506.2) MIL-STD 810E (506.3) MIL-STD 810F (506.4) MIL-STD 810G (506.5) RTCA-DO 160C (10) RTCA-DO 160D (10) RTCA-DO 160E (10) RTCA-DO 160F (10) RTCA-DO 160G (10) IEC (14.2.4a) IEC (8.8) NEMA 250 (5.3), (5.4) UL 50 (30) Ballistic Shock MIL-STD 810F (522) MIL-STD 810G (522.1) 901 Shock MIL-S 901C MIL-S 901D Form 28.6 Revision 5 05/23/06 Page 4 of 8
5 Salt Spray / Fog Chamber Size: (up to 256) ft 3 (8 X 4 X 8 ) MIL-STD 202F (101D) MIL-STD 202G (101E) MIL-STD 750D (1041.3), (1046.2) MIL-STD 750E (1041.3), (1046.3) MIL-STD 810B (509) MIL-STD 810C (509.1) MIL-STD 810D (509.2) MIL-STD 810E (509.3) MIL-STD 810F (509.4) MIL-STD 810G (509.5) MIL-STD 883E (1009.8) MIL-STD 883F (1009.8) RTCA-DO160C (14) RTCA-DO 160D (14) RTCA-DO 160E (14) RTCA-DO 160F (14) RTCA-DO 160G (14) ASTM B117; ASTM G85 IEC (8.12) Lloyds Register 1996 (16) NEMA 250 (5.8) (5.9) SAE J1455 (4.3) UL 50 (38) (39) Icing / Freezing Rain Immersion (0 to 100) mph (0.2 to 10) in/hour MIL-STD 810D (521) MIL-STD 810E (521.1) MIL-STD 810F (521.2) MIL-STD 810G (521.3) RTCA-DO 160C - (24), (A, B, C) RTCA-DO 160D - (24), (A, B, C) RTCA-DO 160E - (24), (A, B, C) RTCA-DO 160F - (24), (A, B, C) RTCA-DO 160G - (24), (A, B, C) GR-63-CORE (34) NEMA 250 (5.6) MIL-STD 202F (104A) MIL-STD 202G (104A) MIL-STD 750D (1011) MIL-STD 750E (1011.1) MIL-STD 810B (512) MIL-STD 810C (512.1) MIL-STD 810D (512.2) MIL-STD 810E (512.3) MIL-STD 810F (512.4) MIL-STD 810G (512.5) MIL-STD 883E (1002) MIL-STD 883F (1002) IEC (8.9) Form 28.6 Revision 5 05/23/06 Page 5 of 8
6 Explosive Atmosphere Chamber Volume: (77) ft 3 Altitude: (up to ) ft MIL-STD 202F (109B) MIL-STD 202G (109C) MIL-STD 810B (511) MIL-STD 810C (511.1) MIL-STD 810D (511.2) MIL-STD 810E (511.3) MIL-STD 810F (511.4) MIL-STD 810G (511.5) RTCA-DO 160C (9) RTCA-DO 160D (9) RTCA-DO 160E (9) RTCA-DO 160F (9) RTCA-DO 160G (9) Sand & Dust Sand Chamber: Test Area - (up to 5 X 5) ft 2 Velocities: (up to 5 700) ft / min Dust Chamber: Test Area (up to 4 X 4) ft 2 MIL-STD 810B (510) MIL-STD 810C (510.1) MIL-STD 810D (510.2) MIL-STD 810E (510.3) MIL-STD 810F (510.4) MIL-STD 810G (510.5) MIL-STD 202F (110A) MIL-STD 202G (110A) RTCA-DO 160C (12) RTCA-DO 160D (12) RTCA-DO 160E (12) RTCA-DO 160F (12) RTCA-DO 160G (12) IEC 60529, 2001 Para 13 IPX6 NEMA 250 ( ) Terminal Strength MIL-STD 202F (211A) MIL-STD 202G (211A) MIL-STD 750D (2036.4) MIL-STD 750E (2036.4) Resistance to Solvents MIL-STD 202F (215J) MIL-STD 202G (215K) MIL-STD 750D (1022.5) MIL-STD 750E (1022.5) MIL-STD 810G (504.1) Fluid Susceptibility RTCA-DO 160C (11) RTCA-DO 160D (11) RTCA-DO 160E (11) RTCA-DO 160F (11) RTCA-DO 160G (12) IEC (8.11) Form 28.6 Revision 5 05/23/06 Page 6 of 8
7 Insulation Resistance MIL-STD 202F (302) MIL-STD 202G (302) MIL-STD 750D (1016) MIL-STD 750E (1016) Solderability MIL-STD 202F (208H) MIL-STD 750D ( ) MIL-STD 750E ( ) Inclination Hi Potential Testing 6 x 6 Table (up to 3 000) lb Static & Dynamic (Up to 5 000) V AC/DC 46-CFR MIL-STD 202G (301) Level: (10 to ) g Pyrotechnic Shock Frequency Range: (10 to ) Hz MIL-STD 810F (517) MIL-STD 810G (517.1) Displacement: (2) in Peak-to-Peak Form 28.6 Revision 5 05/23/06 Page 7 of 8
8 Testing - Vibration Vibration Random and Sinusoidal Force Rating: (20 000) lbf Displacement: (2) in Peak-to-Peak Frequency Range: Random (4 to 3 000) Hz Sinusoidal (4 to ) Hz Maximum Level: Random (100) g rms Sinusoidal (160) g Sine Velocity: Intermittent Duty (100) in/sec Continuous Duty (80) in/sec MIL-STD 202F (201A), (204D) (214A) MIL-STD 202G (201A), (204D) (214A) MIL-STD 750D (2046.1), (2056) (2057.1) MIL-STD 750E (2046.2), (2056) (2057.2) MIL-STD 810B (514), (519) MIL-STD 810C (514.2), (519.2) MIL-STD 810D (514.3), (519.3) MIL-STD 810E (514.4), (519.4) MIL-STD 810F (514.5), (519.5) MIL-STD 810G (514.6), (519.6) MIL-STD 883E (2005.2) MIL-STD 883F (2005.2) MIL-STD 167-1A RTCA-DO 160C (8) RTCA-DO 160D (8) RTCA-DO 160E (8) RTCA-DO 160F (8) RTCA-DO 160G (8) EN GR-63-CORE (5.4.2), (5.4.3) IEC (8.7) Lloyds Register 1996 (12), (13) SAE J1455 (4.9) Notes: 1) This laboratory offers commercial testing service. 2) Testing also performed using customer specified test methods based on the technologies listed above. Approved by: Date: September 2, 2016 R. Douglas Leonard Chief Technical Officer Re-issued: 9/2/16 Revised 8/14/17 Form 28.6 Revision 5 05/23/06 Page 8 of 8
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. Retlif Testing Laboratories TESTING
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Retlif Testing Laboratories 795 Marconi Avenue Ronkonkoma, NY 11779 Robert Bernius rbernius@retlif.com TESTING Valid to: September 2, 2019 Certificate Number:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. Retlif Testing Laboratories TESTING
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Retlif Testing Laboratories 795 Marconi Avenue Ronkonkoma, NY 11779 Robert Bernius rbernius@retlif.com TESTING Valid to: September 2, 2019 Certificate Number:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY DENVER 1530 Vista View Drive Longmont, CO 80504 Sandra Frank Phone 561 529 1488 MECHANICAL Valid To: July 31, 2018 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY PORTLAND 1 5245-A NE Elam Young Pkwy Hillsboro, OR 97124 Sandra Frank Phone: 561-529-1488 Email: sandra.frank@element.com MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS (NTS) 1 Plano Division 1701 E Plano Pkwy Suite 150 Plano, Texas 75074 Kimberly Zavala Phone: 972 509 2566 Kimberly.Zavala@ntscorp.com
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS Massachusetts Division 1146 Massachusetts Avenue Boxborough, MA 01719 David Potpinka Phone: 732 936 0800 MECHANICAL Valid to: September
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Clark Dynamic Testing Laboratory, Inc. 1801
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CONTECH RESEARCH INC. 67 Mechanic Street Attleboro, MA Mark Gates MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTECH RESEARCH INC. 67 Mechanic Street Attleboro, MA 02703 Mark Gates 508 226 4800 MECHANICAL Valid to: February 29, 2016 Certificate Number: 1478.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CONTECH RESEARCH INC. 750 Narragansett Park Drive Rumford, RI Thomas Lamoureux
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTECH RESEARCH INC. 750 Narragansett Park Drive Rumford, RI 02916-1035 Thomas Lamoureux 401-865-6440 MECHANICAL Valid to: February 28, 2018 Certificate Number:
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK (Environmental & Electrical Product Test Laboratory) 15 Enterprise Way Aviation Park West Bournemouth Airport Christchurch Dorset BH23 6HH
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 38 Contact: Mr Steve Abraham Suttons Business Park Tel: +44 (0)118 9662724 Suttons Park Avenue Fax: +44 (0)118 9669023 Reading E-Mail:
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 30 Issue date: 09 February 2018 Tregwilym Industrial Estate Contact: Clive Warren Rogerstone Tel: +44 (0)1443 290022 Newport Fax:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY JUPITER 1 15814 Corporate Circle Jupiter, FL 33478 Sandra Frank Phone: 561 529 1488 sandra.frank@element.com MECHANICAL Valid To:
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that B83 Testing & Engineering, Inc. 3040 West
L.L_.,.till' President and CEO For the Accreditation Council Certificate Number Valid to May 31,2020
Accredited Laboratory A2LA has accredited KEYSTONE COMPLIANCE New Castle, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HERMON LABORATORIES 66 Hatachana Street (Postal Mail to P.O. Box 23) Binyamina, 3055001, ISRAEL Mr. George Shleimovich Phone: 972 4 6288 001 Email: mail@hermonlabs.com
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Product Assessment & Reliability Centre Ltd Unit 4 Alverdiscott Industrial Estate Bideford Devon EX39 4LQ Contact: Mr Richard Tabor Tel: +44 (0)1237 421255 E-Mail: info@parctest.co.uk Website: www.parctest.co.uk
Because People Rely on Your Products, Everyday, You can Rely on Us
Because People Rely on Your Products, Everyday, You can Rely on Us testing Services Environmental Testing Shock & Vibration Testing ACCREDITED 503.1 & 503.2 Ohio and Michigan Laboratories csz testing services
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QUALITECH 30 Hasivim Street Petah-Tikva 4959338, ISRAEL Teodor Weisz Phone: 972 3 926 6218 Email: Tedy.Weisz@ecitele.com Eli Avital Phone: 972 3 926 6170 MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DAYTON T. BROWN, INC. 1175 Church Street Bohemia, NY 11716-5031 Mary Alice Der Aris Phone: 631 244 6315 / 1 800 TEST456 Fax: 631 589 4046 Email: test@dtbtest.com
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Stratford Road Solihull West Midlands B90 4GW Contact: Mr C Gregory Tel: +44 (0)121 627 3225 Fax: +44 (0)121 627 4353 E-Mail: colin.gregory@trw.com Website: www.conekt.co.uk Testing performed at the above
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS (NTS) CHICAGO 1660 Wall Street Mount Prospect, IL 60056 Jit Gupta Phone: 847 934 5300 Website: www.nts.com Email Jit.Gupta@nts.com
SCOPE OF ACCREDITATION TO ISO/IEC
SCOPE OF ACCREDITATION TO ISO/IEC 17025-2005 RADIOMETRICS MIDWEST CORPORATION 12 East Devonwood Avenue Romeoville, IL 60446 Joseph Strzelecki Phone: 815 293 0772 ELECTRICAL (EMC) Valid To: February 29,
DURATEQ 3100 Conforms to MIL-STD 810F
DURATEQ 3100 Conforms to MIL-STD 810F Objective: Company Softeq Development Corporation Name of Case Study DURATEQ 3100 Passes MIL-STD 810F Testing Industry Hardware and Custom Software Development Solution
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS (NTS) CHICAGO 1660 Wall Street Mount Prospect, IL 60056 Jit Gupta Phone: 847 934 5300 Website: www.nts.com Email Jit.Gupta@nts.com
List of Environmental Test related MIL-STD-810 etc.
미국방규격및관련환경시험항목입니다. TEST Altitude Temperature/ Altitude Method applied ASTM D4169 14; DEF STAN 00 35, Part 3, Issue 4:2006: Chapter 3 09 Test CL9 Rapid and Explosive Decompression; GR 63 CORE, Issue 1 Paragraph
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1 TOUCHSTONE SYSTEMS & SERVICES 1817 Porter Street SW Wyoming, MI 49509 Jeremy Hanson Phone: 616 532 0060 Website: www.touchstone-testing.com Email: info@touchstone-testing.com
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA INC. 3933 U.S. Route 11 Cortland, NY 13045 Terence O Beirne Phone: 607 758 6316 www.intertek.com MECHANICAL Valid To: March 31,
Certifying a Structural Health Monitoring System: Characterizing Durability, Reliability and Longevity
ABSTRACT Certifying a Structural Health Monitoring System: Characterizing Durability, Reliability and Longevity Seth S. Kessler * Metis Design Corporation, Cambridge MA, USA The market for SHM has been
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Product Development and Qualification Airport Works Rochester Kent ME1 2XX Contact: Mr P J Davison Tel: +44 (0)1634 204457 Fax: +44 (0)1634 203647 E-Mail: paul.j.davison@baesystems.com Website: www.baesystems.com/faradaytestcentre
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CARMEL-ENVIRONMENTAL TESTS LTD. 33 Alexander Yanai Street Petach Tikva, Israel 49277 Avi Saban Phone: 972-549932413 MECHANICAL Valid To: May 31, 2018 Certificate
SUMMARY OF INDEPENDENT ENVIRONMENTAL TESTING
SUMMARY OF INDEPENDENT ENVIRONMENTAL TESTING Project Numbers: Equipment Tested: A7495-08274-30, 07527-30 07CA60582 Dell Latitude XFR D630 Environmental Test Dates: August 2007 January 2008 Independent
A Study of Environmental Test Sequences for Electrical Units Jung Ho Yang, Yong Soo Kim
A Study of Environmental Test Sequences for Electrical Units Jung Ho Yang, Yong Soo Kim Abstract Electrical units are operated by electrical and electronic components. An environmental test sequence is
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Element Materials Technology Jupiter, LLC
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PARAGON SYSTEMS 18 Basaltic Road Concord, Ontario, CANADA L4K 1G6 Tony Araujo Phone: 905 738 0447 x 237 tonya@paragonsystems.ca MECHANICAL Valid To: April 30,
Anecto Ltd. Ballybrit Business Park, Galway. Testing Laboratory Registration number: 175T
Anecto Ltd. Ballybrit Business Park, Galway Testing Laboratory Registration number: 175T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule bearing the Registration
Mark R. Chrusciel. Director of Sales. For a copy of the slides
Mark R. Chrusciel Director of Sales For a copy of the slides email: chrusciel@cszinc.com Who is CSZ? CSZ is a third generation family owned company which opened for business in 1940. The CSZ organization
HIGH VOLTAGE RESISTOR HVR
HIGH VOLTAGE RESISTOR FEATURES Metal film technology High pulse loading capability Small size Meeting safety requirements of: UL1676 (37 and 68, range 510 KΩ ~ 11 MΩ) - pending IEC 60065 EN 60065 VDE 0860
Product Specification JUL 14 Rev. A1
Industrial SCSI Connector 1. Scope 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of SCSI Connector. 2. Applicable Documents
Intertek Airport Lighting Equipment Certification Program
Intertek Airport Lighting Equipment Certification Program IES Government Contacts Subcommittee, October 22, 2013 IES Airport Lighting Conference, Tucson, AZ Jeremy N. Downs, P.E. Staff Engineer Airport
Test Report. Name of Product: Sonim XP1 Handset Model/type: XP1 / XP1(bt) Applicant : Sonim Technologies, Inc.
Test Report Report No. W07 S097 Name of Product: Sonim XP1 Handset Model/type: XP1 / XP1(bt) Applicant : Sonim Technologies, Inc. Factory: Manufacturer: Shenzhen Sang Fei Consumer Communications Company
DEPARTMENT OF DEFENSE
INCH-POUND MIL-STD-202H 18 April 2015 SUPERSEDING MIL-STD-202G w/change 2 28 June 2013 DEPARTMENT OF DEFENSE TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL COMPONENT PARTS AMSC N/A FSC 59GP FOREWORD 1.
Military Attenuator Module
Military Attenuator Module Actual size: 2.28 x 2.4 x 0.5in 57,9 x 61,0 x 12,7mm MI-RAM Ripple Attenuator Module Features & Benefits Reduces output PARD to 10mVp-p Full attenuation up to 20A load No adjustments
Mechanical Technology & Testing
The Power of Trust. The Future of Energy. MECHANICAL PERFORMANCE Tensile testing Environmental testing and failure analysis services 02 Powertech s clients have to ensure that new components and systems
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Manor Royal Crawley West Sussex RH10 9H Contact: Laura McLoughlin Tel: +44 (0) 1293 581824 E-Mail: laura.mcloughlin@uk.thalesgroup.com Testing
LABORATORY TEST REPORT
Report : 12144 BAE Systems (Operations) Limited The Faraday Test Centre Marconi Way Rochester Kent ME1 2XX Telephone: 01634 203541 Facsimile: 01634 203647 TOTAL NUMBER OF PAGES:- 6 LABORATORY TEST REPORT
PRODUCT SPECIFICATION
1 of 23 B 1.0 GENERAL Scope This specification covers the insulation piercing Quickie Backplane Connector System designed for Backplane-to-flat cable (round conductor) interconnection in low power applications.
STS Directory Accreditation number: STS 0050
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 RUAG Schweiz AG RUAG Defence Test Competence Center Allmendstrasse 86 3602 Thun Head: Dr. Stefan Tresch Responsible for
Product Specification QSSNFNX0300
N to N Quarter Wave Lightning Protector 0.82GHz to 2.2GHz QSSNFNX0300 Features: Low VSWR Low Insertion Loss 60kA Surge Protection Bi-directional Protection Rugged and Weatherproof RF Specifications Nominal
JN FPC P CONNECTOR MANUFACTURER SIGNATURE
DOC. NO.: - ISSUE DATE: 20 / / CUSTOMER: PART NAME: PART NO.: FPC P CONNECTOR 1 APP. DATE: MANUFACTURER SIGNATURE P-TWO INDUSTRIES INC. NO. 9, SHIN HWA RD, KWEI SHAN IND. PARK TAOYUAN, 330 TAIWAN, R.O.C.
MAR 17 Rev B1
Product Specification 108-151010 01 MAR 17 Rev B1 DTM Series Connector System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) DTM
Improving Reliability by Screening
Improving Reliability by Screening Most of the tests that we deal with in manufacture, such as in-circuit and functional tests, are intended to pick up faults that are active and continuously visible.
PACKAGE TESTING LABORATORY. since 1999 Improving packaging sustainability one test at a time ISTA and ISO Accredited
PACKAGE TESTING LABORATORY since 1999 Improving packaging sustainability one test at a time ISTA and ISO 17025 Accredited Micom Laboratories, established in Montreal, Quebec, since 1999 is an ISO 17025
SGL7-06B2. Product Classification. Dimensions. Electrical Specifications. Environmental Specifications. General Specifications
SGL7-06B2 SureGround Grounding Kit for 1-5/8 in corrugated coaxial cable OBSOLETE Replaced By SG158-06B2A SureGround Grounding Kit for 1-5/8 in coaxial cable Brand Bonding Conductor Cable Jacketing Removal,
HOS LOW OHM POWER RESISTORS. SERIES Size As per AEC-Q Open frame strip type. 2W to 5W. R001 to R05.
SERIES Open frame strip type. 2W to 5W. R1 to R5. As per AEC-Q2 PHYSICAL CONFIGURATION L W H T D Recommended PCB layout for high precision applications : Kelvin (4 terminal pad design) is suggested as
INTERFACE STANDARD ENVIRONMENTAL CONDITIONS FOR THE HEAVY BRIGADE COMBAT TEAM TRACKED VEHICLE SYSTEMS
NOT MEASUREMENT SENSITIVE 21 OCTOBER 2011 INTERFACE STANDARD ENVIRONMENTAL CONDITIONS FOR THE HEAVY BRIGADE COMBAT TEAM TRACKED VEHICLE SYSTEMS : Distribution Statement A. Approved for public release.
Design Objective
Design Objective 108-115096 Low profile 5A battery connector 2015.03.03 REV:A 1.0 Scope: 1.1 Content: This specification covers the requirements for product performance, test methods and quality assurance
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-31031/41 10 March 2008 PERFORMANCE SPECIFICATION SHEET CONNECTOR, ELECTRICAL, RECEPTACLE, RADIO FREQUENCY, HIGH RELIABILITY, COAXIAL, SERIES BMZ, CONTACT, FOR FLEXIBLE CABLE This specification
4 Definitions, Caveats, and Summary Requirements
Generic Requirements for Wireless Transceiver Facilities GR-3178-CORE Table of Contents Table of Contents Preface........................................... xiii 1 Introduction 1.1 Scope..........................................
Product Specification
Product Name : AEM Part Number : Customer : Customer Revision: 2 Date: 2011-09-08 AEM Components (Suzhou) Co., Ltd 458 Shenhu Road, Suzhou Industrial Park Jiangsu, P.R China, 215122 TEL: 86-512-6258-0028
Amphenol Amphenol Taiwan Corporation Sheet 1 of 7
Amphenol Amphenol Taiwan Corporation Sheet 1 of 7 Title: Part Number: Description: Micro SD Card Connectors Product Specification GTFP08 SERIES Micro SD Card Connectors push-push type Revisions Control
Vibration & Shock Test Report
Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521-5376 Phone: 402.472.5880 Fax: 402.472.5881 Vibration & Shock Test Report Company: Contact: Crystal Group 850 Kacena
Mag669. Aerospace Qualified Three-Axis Magnetometer.
Mag669 Aerospace Qualified Three-Axis Magnetometer World Leaders in Magnetic Measuring Instruments Mag669 Aerospace Qualified Three-Axis Magnetometer Bartington Mag669 Aerospace Qualified Three-Axis Magnetometer
DATA SHEET Metal Element Current Sensing Chip Resistor CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor 0.5% TO 5%, TCR ±25 TO ±450 SIZE: 1206/2010/2512/2725/2728/4527/4527S RoHs Compliant 14 October, 2016 V.4 DS-ENG-007 23 Page: 2 of 1. SCOPE 1.1 This
China Nuclear Power EQ Testing
China Nuclear Power EQ Testing NPP standards NPP standard system in China 1 2 3 Law, such as Decree of state council Regulation, Such HAF,HAD National and industry Standards, such as GB,NB. Enterprise
OCT 16 Rev A
Product Specification 108-151041 10 OCT 16 Rev A Jiffy Splice System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) Jiffy Splice
U7242A USB3.0 Test Fixture
U7242A USB3.0 Test Fixture User s Guide Agilent Technologies Notices Agilent Technologies, Inc. 2009 No part of this manual may be reproduced in any form or by any means (including electronic storage and
PIA Technical Standard
Parachute Industry Association Publications PIA Technical Standard 120 2.01 AAD Design and Testing Report Format September 20, 1995 TS-120 2.01 Table of Contents 1. Objective...4 2. Reference documents...4
CG78-06B1A. Product Classification. Dimensions. Electrical Specifications. Environmental Specifications. General Specifications
CG78-06B1A SureGround Grounding Kit for 7/8 in coaxial cable OBSOLETE This product was discontinued on: October 1, 2013 Replaced By SG78-06B2A SureGround Grounding Kit for 7/8 in coaxial cable Brand Bonding
Mechanical Ratings. Description Plastic (800EP/ES) Metal (800EM/EB) 1/2 cycle sine wave for 11 ms and no damage at 100 G
Specifications ➊ Front of Panel (Operators) Mechanical Ratings Description Plastic (8EP/ES) Metal (8EM/EB) Vibration (assembled to panel) 1 2 Hz, 1.52 mm max./1 G max. Shock and no damage at 1 G Degree
PERFORMANCE SPECIFICATION SHEET
INCH-POUND 18 April 2018 SUPERSEDING w/amendment 2 15 July 2016 PERFORMANCE SPECIFICATION SHEET CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA, (UNCABLED), FEMALE, PRINTED CIRCUIT,
Automotive Components Testing
Presented By: Mr. Chanachai Marangsri Introduction Objective of components testing: The tests required to validate a product that will simulate the stresses and exposures related to its intended environment.
Thermal Management. How to Dissipate Excess Heat (Watts) - Understanding ΔT and CFM
Spec-516 EPH FX (763) 422-2588 422-2661 Networking Technical Information Thermal Management Thermal Management How to Dissipate Excess Heat (Watts) - Understanding ΔT and CFM When it comes to cooling a
Draft EN V2.1.1 ( )
European Standard (Telecommunications series) Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-8: Specification of environmental tests;
EUROPEAN ETS TELECOMMUNICATION May 1994 STANDARD
EUROPEAN ETS 300 019-2-1 TELECOMMUNICATION May 1994 STANDARD Source: ETSI TC-EE Reference: DE/EE-1019-2-1 ICS: 33.080 Key words: Environment, equipment Equipment Engineering (EE); Environmental conditions
Type RQ73 1E RQ73 1J RQ73 2A RQ73 2B Size Resistance tolerance ±0.1% Resistance Range 40R ~ 35K 40R ~ 130K 10R ~ 350K 10R ~1M0
Key Features Type RQ73 Series SMD TaN Thin film resistor Special passivation layer on resistive element AEC-Q200 qualified Sulfur resistant (per ASTM B809-95 humid vapor test) RoHS Compliant TE Connectivity
ETSI EN V3.0.0 ( )
EN 300 019-2-5 V3.0.0 (2002-12) European Standard (Telecommunications series) Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5:
PEGASUS SERIES GUIDE Amphenol Pcd
GUIDE 2018 Amphenol Pcd Description: The Pegasus Series is Amphenol PCD s latest innovation in small, lightweight, rugged connectors. Designed for use in harsh environments, Pegasus builds on the successful
Alternators single phase dedicated - 4 Pole LSA 43.2 / LSA 44.2
Alternators single phase dedicated - 4 Pole LSA 43.2 / LSA 44.2 5 to 135 kva Electrical and mechanical data 3542 en - 12.08 / f LSA 43.2 / 44.2-4 Pole SPECIALLY ADAPTED FOR SINGLE PHASE Dedicated single
INSTALLATION MANUAL AND OPERATING INSTRUCTIONS
INSTALLATION MANUAL AND OPERATING INSTRUCTIONS MD41-( ) Series GPS Annunciation Control Unit for Garmin GNS 430/530 VHF Communication and Navigation Management System MD41-1469 28vdc Horizontal Mount MD41-1479
Electromagnetic Compatibility Test Report. For. Calorique Ltd.
Project: File: 06CA27374 MC15305 Date: 6/27/2006 Model: FLR17P10W120V & US66P300M220V10 Electromagnetic Compatibility Test Report For Calorique Ltd. Copyright 2005 Underwriters Laboratories Inc. Underwriters
Transfer Impedance Test Method. & Conclusion
Part 3 of 3: Transfer Impedance Test Method & Conclusion Educational Seminar 3-1 by George M. Kunkel Spira Manufacturing Corporation www.spira-emi.com Transfer Impedance Test Method per SAE, ARP-1705,
MAY 2018 Rev C1
Product Specification 108-151010 09 MAY 2018 Rev C1 DTM Series Connector System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE)
DESIGN TEST REPORT. GAMMA Insulators 6184R-70 ANSI Class 55-3 Pin Type Insulator..
December 4, 2010 DESIGN TEST REPORT Insulator Reference: GAMMA Insulators 6184R-70 ANSI Class 55-3 Pin Type Insulator.. Electrical Design Tests 1. Low-Frequency Dry Flashover Test: Three insulators were
DESIGN TEST REPORT. GAMMA Insulators 7061R-70 ANSI Class 55-5 Pin Type Insulator.
December 6, 2010 DESIGN TEST REPORT Insulator Reference: GAMMA Insulators 7061R-70 ANSI Class 55-5 Pin Type Insulator. Electrical Design Tests 1. Low-Frequency Dry Flashover Test: Three insulators were
DESIGN TEST REPORT. GAMMA Insulators 6183R-70 ANSI Class 55-4 Pin Type Insulator.
December 2, 2010 DESIGN TEST REPORT Insulator Reference: GAMMA Insulators 6183R-70 ANSI Class 55-4 Pin Type Insulator. Electrical Design Tests 1. Low-Frequency Dry Flashover Test: Three insulators were
UNS 5kA Arrester. Certified Test Report IEC
CP No.: CP0504 Page 1 of 10 UNS 5kA Arrester Certified Test Report IEC 60099-4 2004 CERTIFICATION Statements made and data shown are, to the best of our knowledge and belief, correct and within the usual
Heavy Wall Heat Shrinkable Tubing 5-7. Flame Retardant Heavy Wall Heat Shrinkable Tubing 8. Heat Shrinkable Ends Caps 9
Heavy Wall Heat Shrinkable Tubing 5-7 Flame Retardant Heavy Wall Heat Shrinkable Tubing 8 Heat Shrinkable Ends Caps 9 Heat Shrinkable Breakout Boots 10 Shrink Ratio 3:1 Shrink-Kon Heavy Wall Heat Shrinkable
TECHNICAL STATEMENT OF REQUIREMENT (TSOR)
TECHNICAL STATEMENT OF REQUIREMENT (TSOR) Surface Off-board Passive Decoy System Version: 1.4 1 07 June 2016 TABLE OF CONTENTS Annex B 1 INTRODUCTION... 6 1.1 OBJECTIVE... 6 1.2 BACKGROUND... 6 2 SYSTEM
EUROPEAN ETS TELECOMMUNICATION February 1992 STANDARD
EUROPEAN ETS 300 019-1-2 TELECOMMUNICATION February 1992 STANDARD Source: ETSI TC-EE Reference: DE/EE-1019-1-2 ICS: 33.080 Key words: Environment, test, equipment Equipment Engineering Environmental conditions
One-slot, 3U, PXI Express/CompactPCI Express module; cm ( in.) 0.53 kg (1.17 lb)
SPECIFICATIONS PXIe-8267 This document lists the PXIe-8267 electrical, mechanical, and environmental specifications. Note Specifications are subject to change without notice. Solid State Drive Total storage
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: Micro Power Wafer Product Specification G881A / G881B / G881MA / G881H / G881C 3.0 mm Pitch, PCB Mount / SMT Type / CRIMPING
Design Guideline for Electrical & Electronic Parts used in Satellite Applications to Support Class T. October 4, 2016
Design Guideline for Electrical & Electronic Parts used in Satellite Applications to Support Class T October 4, 2016 1. SCOPE This document is intended as a guide to assist a piece part manufacturer with
DC-DC Converters MI-J00
DC-DC Converters MI-J00 10 to 50 Watts Features & Benefits Inputs: 28V DC per MIL-STD-704D/E/F 155V DC per MIL-STD-1399A 270V DC per MIL-STD-704D/E/F Single output: 2 48V DC Up to 23W/in 3 MIL-STD-810
ETSI EN V2.2.1 ( )
EN 300 019-2-4 V2.2.1 (2003-03) European Standard (Telecommunications series) Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4:
EUROPEAN ETS TELECOMMUNICATION May 1994 STANDARD
EUROPEAN ETS 300 019-2-4 TELECOMMUNICATION May 1994 STANDARD Source: ETSI TC-EE Reference: DE/EE-1019-2-4 ICS: 33.080 Key words: Environment, specification, equipment Equipment Engineering (EE); Environmental
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that University of Dayton Research Institute Coatings,
General Purpose Chip Resistors MCMR Series
Description The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface
DEPARTMENT OF DEFENSE ENVIRONMENTAL TEST METHODS AND ENGINEERING GUIDELINES
NOTICE OF CHANGE NOT MEASUREMENT SENSITIVE MIL STD 810E NOTICE 3 DEPARTMENT OF DEFENSE ENVIRONMENTAL TEST METHODS AND ENGINEERING GUIDELINES TO ALL HOLDERS OF MIL STD 810E: 1. THE FOLLOWING PAGES OF MIL
PRODUCT SPECIFICATION
1 of 10 A 1.0 GENERAL This specification covers.039 inches vertical DDR II Low Profile & Very Low Profile sockets with blanked / formed contact designed for printed wiring board to dual in-line memory