Multi-contact Compact Circular Connectors
|
|
|
- Preston Banks
- 6 years ago
- Views:
Transcription
1 Multi-contact Compact Circular Connectors RM Series Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Product Specifications Ratings Rated current Rated voltage [RM5] 0 ( and 4 contacts) 5 (8, 0, and contacts) [RM, ] 5 [RM] C 600V, DC 840V ( contacts) C 500V, DC 700V ( and 4 contacts) C 50V, DC 40V (5, 6 and 7 contacts) [RM5] C 600V, DC 840V ( contacts) C 500V, DC 700V (4 and 8 contacts) C 50V, DC 40V (0 and contacts) [RM] C 500V, DC 700V (5 contacts) C 50V, DC 40V (0 contacts) Items Specifi cations Conditions. Contact. Insulation. Withstanding voltage [RM, ] 4mø max. [RM5] 4mø max. (8, 0, and contacts) [RM5] mø max. ( and 4 contacts),000mø min. No fl ashover or dielectric breakdown. Features. Wide variations The RM Series provides a wide selection of plug and receptacle types to satisfy various kinds of application requirements. vailable position counts :,, 4, 5, 6, 7, 8, 0,, 5, and 0. vailable lock mechanisms : threaded coupling type, bayonet sleeve type, and quick detachable type. Measured at DC Measured at DC 500V Operating temperature range Storage temperature range -5 to +85ç -0 to +60ç [RM] C,800V for one minute ( contacts) C,500V for one minute ( and 4 contacts) C,000V for one minute (5, 6 and 7 contacts) [RM5] C,800V for one minute ( contacts) C,500V for one minute (4 and 8 contacts) C,000V for one minute (0 and contacts) [RM] C,500V for one minute (5 contacts) C,000V for one minute (0 contacts) 4. Vibration No electrical discontinuity for 0µs. or greater 0 to 55 Hz/cycle, full amplitude : 0.75mm, axis directions, hours each 5. Shock No electrical discontinuity for 0µs. or greater 6. Mating cycles Contact : 8mø max.,000 times 7. Temperature cycle 8. Moisture Insulation : 00Mø min. Insulation : 00Mø min. (when dry) cceleration : 40m/s, duration : ms axis directions, times each -55 C : 0 minutes Normal temperature : 0 to 5 minutes 85 C : 0 minutes Normal temperature : 0 to 5 minutes, left for 5 cycles Temperature : 40 C, relative humidity : 0 to 5%, left for 6 hours 06.e
2 RM Series Multi-contact Compact Circular Connectors Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Plug RM 5 T P - S (0) q w e r t y u i qmodel name : RM Series (Round Miniature Series) Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. wshell size : The shell size refers to the outer shell diameter of the mating interface of the plug. elock mechanism T : Threaded coupling type B : Bayonet sleeve type Q : Quick detachable type rconnector type () P : Plug J : Jack P-C : Plug cap R-F : Square fl ange for receptacle () R : Receptacle R-C : Receptacle cap R-B : Cord bushing tform variation class : Indicates a variation or change within the series. ynumber of contacts ucontact form P : Male contact S : Female contact iother specifi cations : two-digit number is added to indicate other specifi cations. Materials / Finish Items Material Finish Remarks Plated shell Insulator Brass, zinc alloy luminum alloy Diallyl phthalate resin Polycarbonate resin Nickel plating Chromium plating UL4V-0 (Black) Contact Brass or copper alloy Silver plating Please note that materials will differ depending on the actual part number.
3 RM Series Multi-contact Compact Circular Connectors RMB connectors (bayonet sleeve type) Plug 4 Ø8 Ø. Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø8 Cable clamp range: 5mm min. to 8mm max. RMBPE-S(7) RMBPE-S(7) RMBPE-4S(7) RMBPE-5S(7) RMBPE-7S(7) Receptacle (Jam nut to be fastened) 6 RMBPE-PH(7) RMBPE-PH(7) RMBPE-4PH(7) RMBPE-5PH(7) RMBPE-6PH(7) RMBPE-7PH(7) (HEX) Ø4. Ø7.6 M RMBRD-PH(7) RMBRD-PH(7) RMBRD-4PH(7) RMBRD-5PH(7) RMBRD-6PH(7) RMBRD-7PH(7) Remarks : See page for details on recommended panel cut-out. RMBRD-S(7) RMBRD-S(7) RMBRD-4S(7) RMBRD-5S(7) RMBRD-7S(7)
4 RM Series Multi-contact Compact Circular Connectors Receptacle (Integral, square flange) Ø Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. 6 Ø4. Ø4. RMBRB-S RMBRB-S RMBRB-4S RMBRB-5S RMBRB-7S RMBRB-PH RMBRB-PH RMBRB-4PH RMBRB-5PH RMBRB-6PH RMBRB-7PH Ø 4. Remarks :. See page for details on recommended panel cut-out.. Please note that the RMBRB differs in mounting dimensions from the RMBR-F. Jack 7 40 maximum of 0.6mm Ø8 0.5 Cable clamp range: 5mm min. to 8mm max. RMBJB-S(07) RMBJB-S(07) RMBJB-4S(07) RMBJB-5S(07) RMBJB-7S(07) RMBJB-PH RMBJB-PH RMBJB-4PH RMBJB-5PH RMBJB-6PH RMBJB-7PH
5 6.5 Ø Ø 5. Ø.5 Cable clamp range: 5mm min. to 8mm max. RM Series Multi-contact Compact Circular Connectors RM5Q connectors (quick detachable type) Plug Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. RM5QPS-S(7) RM5QPS-8S(7) RM5QPS-0S(7) RM5QPS-S(7) Receptacle (Jam nut to be fastened) 4. (HEX) 7.6 RM5QPS-P(7) RM5QPS-4P(7) RM5QPS-8PH(7) RM5QPS-0PH(7) RM5QPS-PH(7) M Ø7.4 Ø0 RM5QRD-P(7) RM5QRD-4P(7) RM5QRD-8PH(7) RM5QRD-0PH(7) RM5QRD-PH(7) Remarks : See page for details on recommended panel cut-out. RM5QRD-S(7) RM5QRD-8S(7) RM5QRD-0S(7) RM5QRD-S(7)
6 ØC RM Series Multi-contact Compact Circular Connectors RM [ ] T connectors (threaded coupling type) Plug L ØD Ø Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. (Maximum cord diameter) B Ø B ØC ØD L RM5TP-S(7) RM5TP-P(7) RM5TP-4P(7) RM5TP-8S(7) M RM5TP-8PH(7) RM5TP-0S(7) RM5TP-0PH(7) RMTP-5P(7) RMTP-0P(7) TM Remarks : TM5x represents 0 trapezoidal thread profi le. Receptacle (Jam nut to be fastened) 4. HEX 7.6 M M 0.5 Ø0 RM5TRH-P(7) RM5TRH-S(7) RM5TRH-4P(7) RM5TRH-8PH(7) RM5TRH-8S(7) RM5TRH-0PH(7) RM5TRH-0S(7) Remarks : See page for details on recommended panel cut-out. 6
7 RM Series Multi-contact Compact Circular Connectors Receptacle (Jam nut to be fastened) D B C Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø B C D RMTR-5P(7) RMTR-0P(7) TM5 M Remarks :. TM5x represents 0 trapezoidal thread profi le.. See page for details on recommended panel cut-out. 7
8 TM Ø Ø5 Ø.8 Ø 4 TM0 TM HEX Ø.8 RM Series Multi-contact Compact Circular Connectors RM5T (type D) connectors Plug (solder type) Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. RM5TPD-0P(7) RM5TPD-0S(7) RM5TPD-P(7) RM5TPD-S(7) Jack (solder type) RM5TJD-0P(7) RM5TJD-0S(7) RM5TJD-P(7) RM5TJD-S(7) Receptacle (solder type) 7.6 M RM5TRD-0P(7) RM5TRD-0S(7) RM5TRD-P(7) RM5TRD-S(7) Remarks : See page for details on recommended panel cut-out. 8
9 RM Series Multi-contact Compact Circular Connectors Plug (crimp type) TM0 B Ø Ø5 ØC Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. B ØC RM5TPD-0PC(7) RM5TPN-0PC(7) Receptacle (crimp type) RM5TRD-0SC(7) Remarks : See page for details on recommended panel cut-out. Receptacle (dip type).5 6 M TM0 HEX.5 6 TM0 HEX Mating guide B Dip post diameter Ø0.8 B RM5TRD-0SB(7) Remarks : See page for details on recommended panel cut-out. M Dip post arrangement dimensions when viewed from the mating end Mating guide position
10 RM Series Multi-contact Compact Circular Connectors RM Series accessories Cap Plug cap 00 Ø6. Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Part No. HRS No. Ø B C D RM5TP-C(7) MX 6.5 RMTP-C(7) TM5X 7.5 Receptacle cap Ø6 Ø. Part No. HRS No. Ø B C D RM5TR-C(7) MX.5 RMTR-C(7) TM5X 8.5 Square flange Ø 00 Part No. HRS No. Ø B C D RMBR-F(7) RM5TR-F(7) Ø Ø Cord bushing Ø0.7 Ø6.4 Ø8 Part No. HRS No. Remarks RMBPG-B(7)
11 RM Series Multi-contact Compact Circular Connectors Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved..4 Contact Male contact 6.7 Female contact Type Part No. HRS No. B C pplicable wire size Loose piece RM-PC to 4 WG contacts RM-PC to 8 WG Reel RM-PC to 4 WG contacts RM-PC to 8 WG - Type Part No. HRS No. B C pplicable wire size Loose piece RM-SC to 4 WG contacts RM-SC to 8 WG 7 Reel RM-SC to 4 WG contacts RM-SC to 8 WG Note : Loose piece contacts are available in 00 pcs/pack. Reel contacts are available in 8,000 pcs/reel..4 pplicable tools - Type Items Part No. HRS No. pplicable contact pplicable wire size RM-PC- HT80/RM to 4 WG Manual crimping RM-SC- Manual tool RM-PC- HT80/RM to 8 WG RM-SC- utomatic crimping CM-05C press RM-PC- utomatic P-05-RM to 4 WG RM-SC- pplicator RM-PC- P-05-RM to 8 WG RM-SC- Extraction tool RM-TP Manual crimping tool Contact extraction tool utomatic crimping press (Type CM-05C) How to use the RM5Q connectors (quick detachable type). Insertion.Extraction For smooth mating, while holding the plug tube, match the guide of the receptacle with the key-way on the plug and push straight it in as shown in the above fi gure. To unmate, hold the locking sleeve and twist it approximately 0 degrees to the left, then pull it straight off as shown in the above figure.
12 Powered by TCPDF ( RM Series Multi-contact Compact Circular Connectors Receptacle-recommended panel cut-out For jam nut type Recommended panel cut-out for shell sizes and 5 Recommended panel cut-out for shell sizes.6 For square flange type Ø Ø 4 Ø Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Remarks : Use a 0.5 ~ mm thickness panel for all shell sizes. Mounting method Nut tightening Square fl ange Sign 5 BRD QRD TRH TRD TR BRB Ø B C D ØE Remarks : The dimensional tolerance to be +0. / 0. Shell size Locking mechanism Contact Position rrangement and Specifications Shell size : Shell size : 5 Contact arrangement Ø No. of contacts Withstanding voltage C,800V for one minute C,500V for one minute C,000V for one minute C,800V for C,500V for one minute one minute Rated current 5 0 Insulation,000Mø min.,000mø min. Contact 4mø max. mø max. Inner diameter of solder pot Ø.mm Ø.7mm Contact arrangement Shell size : 5 Shell size : No. of contacts Withstanding voltage C,500V for one minute C,000V for one minute C,500V for C,000V for one minute one minute Rated current 5 5 Insulation,000Mø min.,000mø min. Contact 4mø max. 4mø max. Inner diameter of solder pot Ø.mm Ø.mm Remarks. The above figures show contact arrangements viewed from the mating end of the connectors with female contacts.. The " " marks shown in the above figures represent the position of the receptacle mating guide.. Withstanding voltages are shown as test voltages. Usage Recommendations. Be sure the power is off before mating/unmating a connector.. Be sure to use a connector with female contacts for the power side of the circuit.. Be sure to engage the lock mechanism on the connectors. 4. Regarding plugs and jacks : the forces from cable clamping, cable rotation, and other forces may vary with the cable construction. Please make sure that your cable is suitable for use with these connectors before usage and production. 4-6-,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JPN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 0/06. Contents are subject to change without notice for the purpose of improvements.
Circular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
4.5 mm pitch, Horizontal Mating 2-Piece System Connectors
NW 4.5 mm pitch, Horizontal Mating 2-Piece System Connectors D64 Series (UL pending) The floating structure of the BTB connection provides increased flexibility by absorbing the movement of the PCB s.
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors
0.35mm Pitch 0.8mm Height Hybrid Power/Signal Connectors for Board-to-Board and FPC-to-Board
NEW.35mm Pitch.8mm Height Hybrid Power/Signal Connectors for Board-to-Board and FPC-to-Board BM24 Series Conventional type (P=.35 mm, 2 contacts) Features 1 Rated current : 5A The compact BM24 Series features
Features. FX22 Series
FX22 Series Floating range: ±.6mm Z X Features 1. The floating design Structure provides for an mis-alignment of ±.6mm in both X and Z directions in.5mm pitch product. (Fig.1) 2. A double-beam contact
Features. FX22 Series NEW
NEW FX22 Series Floating range: ±.6mm Z X Fig.1 Features 1. The floating design Structure provides for an mis-alignment of ±.6mm in both X and Z directions in.5mm pitch product. (Fig.1) 2. A double-beam
3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Card Edge Type Ribbon Cable Connectors
Card Edge Type Ribbon Cable Connectors HIF5 Series Product Specifications Rating 1. Insulation Resistance 1000M min. 2. Withstanding voltage No flashover or insulation breakdown. 3. Contact Resistance
Floating Stacking 0.5mm Pitch Board to Board Connector
Floating Stacking 0.5mm Pitch Board to Board Connector FX20 Series X direction Floating range : 0.6 to 0.8mm Y direction Floating range : 0.6mm Features 1. 0.5mm pitch 2. Connection type: Stacking 3. Number
Standard Connectors. MD Series NEW
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Circular Connectors for Audio Equipment
Circular Connectors for Audio Equipment HA Series Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Product Specifications Ratings Features Rated voltage Rated current 5A A (PCB dip type)
Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source DF57 Series Swing-Lock Structure explanatory drawing Before mating Lock portion Features 1.Reinforced lock structure with swing
Card Edge Type Ribbon Cable Connector
Card Edge Type Ribbon Cable Connector HIF5 Series pplications Computers, FDD, various kinds of electronic equipment. Features 1. Product Variation The area to install the connector body is classified into
High Speed, Matched-Impedance, Parallel Board-to-board Connector System
High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series Receptacle (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
DTS-HC High-Current Connectors
ROBUST DTS-HC High-Current Connectors Signal and power contacts in same housing Up to four 150 A or one 300 A high-current contacts Threaded coupling with self-locking mechanism for anti-vibration 100%
solutions HIGH DENSITY CONNECTORS Custom designed Contact arrangements
Custom designed HIGH DENSITY CONNECTORS NANO-D PITCH As the need for increased miniaturisation is becoming ever greater, AXON has developed an ultra-high density solution within the existing micro connector
Amphenol RF- SMA Connector Series
Page 1 of 8 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
38999 SERIES III HIGH POWER CONNECTOR RANGE. Interconnect Solutions Worldwide
38999 III HIGH POWER CONNECTOR RANGE 38999 III HIGH POWER CONNECTOR The Polamco 38999 High Power Connector range offers a simple and effective way of terminating power cables in a harsh environment military
STANDARD COAXIAL CONNECTORS
STANDARD COAXIAL CONNECTORS COAXI-KIT ISO 9001 APPROVED RADIALL COMPANY PROFILE Since 1952, RADIALL has specialized in the field of coaxial connectors and cables assemblies. RADIALL s experience and high
Amphenol Amphenol Taiwan Corporation Sheet 1 of 7
Amphenol Amphenol Taiwan Corporation Sheet 1 of 7 Title: Part Number: Description: Micro SD Card Connectors Product Specification GTFP08 SERIES Micro SD Card Connectors push-push type Revisions Control
SMB. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
SMB Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
Ribbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
ACT. Summary. 1 Introduction. 2 Synoptic. 3 Technical characteristics. 4 Part-numbering system. 5 Arrangements. 6 Receptacles. 7 Plug / Panel seal
Summary 1 Introduction 2 Synoptic 3 Technical characteristics 4 Part-numbering system 5 Arrangements 6 Receptacles 7 Plug / Panel seal 8 Mating and unmating dimensions 9 Mounting cutouts 10-11 Contacts
MAY-16 REV B2
Product Specification 108-20025 06-MAY-16 REV B2 The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity (TE)
SMA SERIES COAXIAL CONNECTORS
General R Reference Standards MIL-PRF-3912 MIL-DTL-83517 MIL-STD-348 (Interface) IEC 6169-15 CECC 12211 Materials Bodies and nuts Contacts Insulators Gaskets Crimp ferrules Non-magnetic stainless steel
CVB-EX Mil-C-5015 reverse bayonet ATEX Connectors
CVB-EX Mil-C-5015 reverse bayonet ATEX Connectors Standards Certification 94/9/EC (ATEX) Directive According to European Standards EN 60079-0 EN 60079-1 EN 61241-0 EN 61241-1 Protection degeree IP66/67
10 + Gbps 0.5mm pitch Stacking Connectors
1 + Gbps.5mm pitch Stacking onnectors XG1 Series 1.3 1.1 Mechanical Features.5mm Pitch / ouble-row SMT Stacking Height : 15~23mm ( 2 pieces ) 25~44mm ( 3 pieces ) Number of ontacts : / / 14 / 1 / 156 /
0.5mm Pitch SMT Board to Board Connector
The product information in this catalog is for reference only. Please request the ngineering rawing for the most current and accurate design information. ll non- products have been discontinued, or will
COSMTEC. SMA Female to N Female Adapter. RF Connector Technical Data Sheet S-024. Description Minimum Typical Maximum Units
Configuration SMA Female Connectr 1 N Female Connectr 2 50 Ohms SMA Female to N Female Adapter S-024 Features Max VSWR of 1.3:1 up to 18 GHz SMA Interface compliant with MIL-STD-348A N Interface compliant
t This publication is issued to provide outline information only and unless specifically agreed to the contrary by WEALD ELECTRONICS LTD. in writing, is not to form part of any order or contract or be
Photo. JBX Push Pull Sealed IP68 (Mated) The Solution for both Outdoor and Indoor waterproof applications. Secure for Outdoor applications.
Photo Environmentally Integrated Backshell Sealed Fire JBX proof onnector The Solution for both Outdoor and Indoor waterproof applications Secure for Outdoor applications Waterproof, IP68 (Mated) Reliable
3Pin and Socket Connectors
AMPLIMITE Connectors Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-208 Industrial versions available that use the same manufacturing process of MIL-C-
Extended-Frequency SMA Connectors
Extended-Frequency SM Connectors Extended-Frequency SM Connectors This brochure introduces two new series of connectors that extend SM performance beyond the MIL-PRF-39012 upper frequency limit of 18 GHz,
Contacts for Full Duplex Ethernet Link
8D Series Twinax & Quadrax Contacts Contacts for Full Duplex Ethernet Link Twinax and Quadrax contacts with robust MIL-DTL-38999 compliant screw coupling system for networks and high vibration environments.
Precision SMA. Key Features. Military grade. Rugged stainless steel design. Intermateable with all SMAs to Mil-C Frequency range DC to 18 GHz
Key Features Military grade Rugged stainless steel design ntermateable with all SMAs to Mil-C-39012 Frequency range DC to 18 GHz Cannon s precision SMA connectors feature the ML-C-39012 Series SMA interface
1.25mm Pitch Miniature Crimping Connector
1.mm Pitch Miniature Crimping Connector DF1 Series Type Mounting Type Mounting Height Straight Type DIP SMT.mm.mm Right Angle Type DIP SMT.mm Features 1. Miniature Size Designed in the low profile at mounting
0.4/0.5 mm Pitch, 1.5 mm Height, High Speed Transmission (5 + Gbps) FPC Connector
0.4/0.5 mm Pitch, 1.5 mm Height, High Speed Transmission (5 + Gbps) FPC Connector FH55/FH55M Series Dimensions: 40 pos Features 1. High-Speed Transmission(5 + Gbps) FPC Connector Capable of transmitting
ARINC 801 Fiber Optic Connectors
ARINC 801 Termini and 38999 Connectors ARINC 801 Fiber Optic Connectors The high density fiber optic connection made by SOURIAU using 1.25mm ferrules. A qualified technology Flight proven qualified ARINC
Amphenol PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 solder type
Amphenol PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 solder type Amphenol solder contact miniature cylindrical connectors meet the most critical application needs. esign versatility combined with high
Series 805 Mighty Mouse Triple-Start ACME Thread Receptacle
Series 0 Mighty Mouse Triple-Start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Three Shell Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front
Cobra. Innovative shielded low profile right angle connector plug and backshell assemblies reduce MIGHTY MOUSE
MIGHTY MOUSE Cobra The Ultra-Low Profile EMI/RFI Plug and ackshell Assembly Innovative shielded low profile right angle connector plug and backshell assemblies reduce clearance requirements without compromising
Data Bus Connector and Terminator Requirements Document DB-1001-A. Revision C
Data Bus Connector and Terminator Requirements Document DB-1001-A Revision C 2507 W. Geneva Dr. Tempe, Arizona 85282 Phone [602] 231-8616 FAX [602] 273-9135 www.phxlogistics.com TABLE OF CONTENTS 1. Introduction
Amphenol Fast Connector
Amphenol The Winning Connection Amphenol Fast Connector For all your Autosport connector requirements Fast Connector Series For Autosport Applications Contact Arrangement Amphenol have developed the FAST
HS h e n EU omplia t 2002 / 9 5 / C
9 57-30500 0 0 E U 2 C A mp hen 2/ 5 / E omplia Ro HS ol C nt hen z n She 57-30360 DE-09P & DE-09S Standards: UL File: E119881 Connectors according to MIL C24308 SPECIFICATIONS : MATERIALS AND Shells Steel
Mar11 Rev A
Product Specification 108-1472 11Mar11 Rev A Connector, Short Point Receptacle Contact 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for TE Connectivity (TE)
Bulkhead Feed-throughs
38999 series III Bulkhead Feed-throughs Connectors and interconnect systems for harsh environments The company designs, manufactures and markets high performance interconnect solutions for severe environments
Amphenol Amphenol Taiwan Corporation Sheet 1 of 8
Amphenol Amphenol Taiwan Corporation Sheet 1 of 8 Title: Part Number: Description: Micro Power Plus Product Specification G88MP Series 3.0 mm Pitch, PCB Mount / Cable Crimping Type Revisions Control Rev.
Miniature Product with a Threaded Coupling
8 ed oupling Miniature Product with a ed oupling Space saving with scoop proof connector designed for any harsh application where both size and EMI shielding are critical. compact solution iameter up to
MIL-DTL Series I Connectors
RUGGED Self-locking bayonet coupling system 100% scoop proof 500-mating-cycle durability Excellent shock and vibration resistance Environmentally sealed and hermetic versions available VERSATILE Available
CONNECTORS, HIGH RELIABILITY, SPACE USE, GENERAL SPECIFICATION FOR
Registration No. 985 Superseding NASDA-QTS-2060B Cancelled CONNECTORS, HIGH RELIABILITY, SPACE USE, GENERAL SPECIFICATION FOR JAXA JAPAN AEROSPACE EXPLORATION AGENCY This specification was originally written
Feb12 Rev D
Product Specification AMPSEAL* Connectors 108-1329 01Feb12 Rev D 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for AMPSEAL* connectors. 1.2. Qualification
SMB Flexible Cable Connector Index
SMB Flexible Cable Connector Index Right Angle Crimp Type Bulkhead Jack... 5 Right Angle Crimp Type Plug... 3 Specifications... 2 Straight Crimp Type Bulkhead Jack... 5 Straight Crimp Type Jack... 4 Straight
The UK s Leading Supplier LUMINUS
The UK s Leading Supplier LUMINUS GUIDE 2018 Description: Amphenol LTD is excited to become the UK s leading supplier of the Luminus series. The product was originally designed by our sister division Amphenol
Amphenol PCD Shenzhen. PHEV: BSM series Datasheet
Amphenol PCD Shenzhen PHEV: BSM series Datasheet Battery Swapping Module Quick mating Deviation self- correction Collision prevention High durability PRESENTATION BSM 5A Female Side: BSM-5A-F-10S Male
Low Profile 0.5mm Pitch Connectors For FPC
Low Profile 0.5mm Pitch Connectors For FPC FH17 Series FH17 (on-board type) flip-lock mechanism Features 1. Low profile 0.5mm pitch FPC connectors As products become lighter/thinner/shorter/smaller, requests
High Reliability Hyperboloid Contacts
High Reliability Hyperboloid Contacts ICO SERIES TM Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate TM Contacts are high quality, high reliability hyperboloid TM contacts
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: Micro Power Wafer Product Specification G881A / G881B / G881MA / G881H / G881C 3.0 mm Pitch, PCB Mount / SMT Type / CRIMPING
8D Series. MIL-DTL Series III. Connection Technologies
MIL-DTL-38999 Series III Connection Technologies MIL-DTL-38999 Series III Contents Overview A universal product platform... 06 8D Series - Presentation... 07 Product overview... 08 A superior concept...
8D Series. MIL-DTL Series III
MIL-DTL-38999 Series III MIL-DTL-38999 Series III Contents Overview A universal product platform... 06 8D Series - Presentation... 07 Product overview... 08 A superior concept... 09 A performing MIL standard
Series 805 Mighty Mouse Triple-Start ACME Thread Receptacle
Mighty Mouse and Ordering Information Three Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front or rear panel mounting, or in-line receptacles for free-hanging cables.
8D SERIES. Standard Aerospace & Military Connectors. MIL-DTL Series III/EN3645
8D SERIES Standard Aerospace & Military Connectors MIL-DTL-38999 Series III/EN3645 8D Series Presentation Since the early 80 s, SOURIAU is a major supplier of 38999 Series III, the screw-coupled version
Accessories / Screwlocks
3401-022 Accessories / Screwlocks Product Features Male or female screwlocks Residual magnetism level - Brass parts: NMB (200 Gamma max) - Stainless Steel parts: NMB (200 Gamma max) 1 part number for 1
8D Series MIL-DTL Series III
8D Series MIL-DTL-38999 Series III 8D Series - MIL-DTL-38999 Series III Contents Overview Common Section MIL-DTL-38999: A universal product platform... 04 8D Series - Presentation... 05 Product overview...
SELECTION GUIDE Appearance Sensing distance Operation Mode Connector Shape example (M8) Outer diameter (Ferrous material only) Wiring Output Output no
Stainless Steel Sensing Face Proximity Switch Model FL7S The FL7S is a proximity switch having a stainless steel sensing face and housing, and is specially designed for welding applications on the automobile
0.5mm Pitch SMT Board to Board Connector
.5mm Pitch SMT oard to oard onnector DF16 Series orrespond to Automatic Mounting The vacuum pick-up area is prepared for automatic mounting machine. Features 1. Miniaturizing and Slimming In addition to.5mm
8D SERIES. Standard Aerospace & Military Connectors. MIL-DTL Series III/EN3645
8D SERIES Standard Aerospace & Military Connectors MIL-DTL-38999 Series III/EN3645 8D Series Presentation Since the early 80 s, SOURIAU is a major supplier of 38999 Series III, the screw-coupled version
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment IX Series Contribution to size reduction Compact size 75% reduced size compared to RJ-45 Overview Multi-purpose
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment IX Series Contribution to size reduction Compact size 75% reduced size compared to RJ-45 Overview Multi-purpose
Hirose Korea Board To Board Connector
Hirose Korea Board To Board Connector KN13-Series 1. Characteristic of Products ------------------------------------------------- 2 page 2.Specifications & Formation of Products ---------------------------------
0.65mm Pitch SMT Board to Board Connector
0.65mm Pitch SMT oard to oard onnector 15 Series orresponding to automatic mounting The vacuum area is secured the automatic mounting machine for vacuum. igure 1 eatures 1. ompatibility of Miniaturization
General Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): @ V C or @ 0V C Logic Level (gold): 0.4V maximum @ 8V C/DC maximum (pplicable Range 0.m ~ 0. @ 0mV ~ 8V) Logic/Power Level:
MIL-DTL series III
MIL-DTL-38999 series III and range extension MIL-DTL 38999 Series III Connectors and interconnect systems for harsh environments The company designs, manufactures and markets high performance interconnect
8D Series Overview. Typical applications. Military Aeronautics. Civil Aeronautics. Defense. Industrial. Ground Military.
Typical applications Civil Aeronautics Military Aeronautics Defense Ground Military Industrial Aleksey Stemmer / Fotolia JPS / Fotolia Dell / Fotolia Fotolia Marine - Offshore 6 Features & Benefits qpl
8D SERIES. Standard Aerospace & Military Connectors. MIL-DTL Series III / EN3645
8D SERIES Standard Aerospace & Military Connectors MIL-DTL-38999 Series III / EN3645 8D Series Presentation Since the early 80 s, SOURIAU is a major supplier of 38999 Series III, the screw-coupled version
Product Specification JUL 14 Rev. A1
Industrial SCSI Connector 1. Scope 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of SCSI Connector. 2. Applicable Documents
Active Optical Connector
Active Optical Connector BF4M Series Electrical input Optical Fiber Electrical output VCSEL Driver VCSEL PD TIA + LA Overview Hirose developed the micro "BF4MC connector" that enables optical transmission
MIL-DTL Hermetically Sealed Connectors. Series I. Series II. Series III
Hermetically Sealed Connectors Series I Sealtron s 9700 Series of hermetically sealed connectors are manufactured in accordance with MIL-TL-38999 Series 1 (LJT). These series are designed so that electrical
2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805
M Series Selection Table M0, M0, M0 and M0 SERIES M0 M0 M0 M0 PAGES Page -0 Pages - Pages - Pages -0 TYPE Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread DESCRIPTION More rugged keys and
Hirose Korea Board To Board Connector
Hirose Korea Board To Board Connector BM30-Series 1. Characteristic of Products ------------------------------------------------- 2 page 2.Specifications & Formation of Products --------------------------------
KPC-3/898 KPTC C O N N E C T O R S
KPC-3/898 KPTC C O N N E C T O R S Introduction The miniature circular connectors series KPTC from ITT Cannon are especially used in the machine and in the automotive industries. They are designed for
PEGASUS SERIES GUIDE Amphenol Pcd
GUIDE 2018 Amphenol Pcd Description: The Pegasus Series is Amphenol PCD s latest innovation in small, lightweight, rugged connectors. Designed for use in harsh environments, Pegasus builds on the successful
Distinctive Characteristics
Distinctive Characteristics Power and logic level capabilities available to suit varying applications. Light Duty Miniature Toggles Series E High torque bushing prevents rotation and separation from metal
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 1.0 SCOPE This Product Specification covers the 3.96 mm (.156 inch) centerline
MIL-DTL Hermetically Sealed Connectors. Series I. Series II
Hermetically Sealed Connectors Series I Sealtron s 9700 Series of hermetically sealed connectors are manufactured in accordance with MIL-TL-38999 Series 1 (LJT). These series are designed so that electrical
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-39012/21B 20 April 2009 SUPERSEDING MIL-PRF-39012/21B 16 November 2006 PERFORMANCE SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC (UNCABLED),
SMPM Female Cabled Connectors
Product Specification 108-2326 28 APR 14 Rev B SMPM Female Cabled Connectors 1. SCOPE This specification covers performance, tests and quality requirements for the TE Connectivity (TE) Subminiature P Miniature
Cobra. Innovative shielded low profile right angle connector plug and backshell assemblies reduce MIGHTY MOUSE
MIGHTY MOUSE Cobra The Ultra-Low Profile EMI/RI Plug and ackshell Assembly Innovative shielded low profile right angle connector plug and backshell assemblies reduce clearance requirements without compromising
Bulletin 800F Plastic and Metal Operators 22.5 mm mounting hole IP65/66, Type 4/4X/13 Internationally rated operators
Bulletin F. mm Push Buttons Product Overview Bulletin F Plastic and Metal Operators. mm mounting hole IP/, Type /X/ Internationally rated operators Table of Contents See below. TABLE OF CONTENTS Page Specifications...
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION 108-25020 27-FEB-18 REV A INTERCONNECTION SYSTEM, AMPMODU* MOD IV, WIRE TO BOARD, STANDARD PRESSURE GOLD CONTACTS 1. SCOPE 1.1. Content This specification covers performance, tests
Standard Terminals and Splices
Standard s and Splices Product Facts MP solderless terminals and splices meet or exceed today s standards for reliable termination in applications ranging from control circuits to heavy duty power wiring
0.65mm Pitch SMT Board to Board Connector
0.65mm Pitch SMT oard to oard onnector 15 Series orresponding to automatic mounting The vacuum area is secured the automatic mounting machine for vacuum. igure 1 eatures 1. ompatibility of Miniaturization
DETAIL SPECIFICATION SHEET
METRIC MIL-DTL-38999/34D 13 October 2016 SUPERSEDING MIL-DTL-38999/34D 10 July 2008 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, CIRCULAR, BREAKAWAY, JAM-NUT MOUNTING, REMOVABLE CRIMP
Mar11 Rev C
Product Specification 108-1579 11Mar11 Rev C Sealed Circular Plastic Connector With Removable Crimp Contacts 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/138C 10 September 2018 SUPERSEDING MIL-DTL-55302/138C 24 March 2004 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN, 160 CONTACT POSITIONS,
D-SUBMINIATURE ACCESSORIES
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE ACCESSORIES OVERVIEW FCI s D-Subminiature connectors are part of an industry standard for applications requiring robust and reliable connectors. These proven D-Subminiature
NARROW PITCH (0.4mm) CONNECTORS P4S SERIES
FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION AXT3, 4 NARROW PITCH (0.4mm) CONNECTORS P4S SERIES NEW 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. 1)
NARROW PITCH (0.6mm) CONNECTORS P6 SERIES P6S
NARROW-PITCH CONNECTORS FOR BOAR-TO-BOAR CONNECTION NARROW PITCH (0.6mm) CONNECTORS P6 SERIES P6S Compliance with RoHS irective FEATURES 1. Bellows-type contacts Bellows-type contacts resist mating stress
High Speed Transmission, 0.8 mm Pitch Connectors for PCB Connections
High Speed Transmission,.8 mm Pitch Connectors for PCB Connections FX18 Series High speed transmission characteristics ICR Insertion-loss-to-Crosstalk-Ratio Enough margin with regulated ICR data of IEEE82.3ap
Amphenol GB- Series Accessories Miniature Bayonet Lock Connectors Complies with MIL-C CE-2Aa
62 G- Series ccessories Miniature ayonet Lock onnectors omplies with MIL--26482 E-2a This miniature bayonet lock connector series offers designers important features not found in any other range of connectors.
Stainless Steel Series MIL-DTL Series III
8D - D38999 Stainless Steel Series Stainless Steel Series MIL-DTL-38999 Series III 39 8D Series - MIL-DTL-38999 Series III Description High contact density Screw coupling Contact protection: 100% Scoop