LOCATION CONNECTIVITY MASTERPLAN BUILDING THREE WAREHOUSE OFFICE SPECIFICATIONS FLEXIBILITY EFFICIENCY LEASE DETAILS

Transcription

1

2 NORTH CONNEX (under construction) Located in Sydney s premier Eastern Creek Industrial precinct at the junction of the M4 and M7 motorways, Calibre delivers unbeatable connections. M7 BLACKTOWN M4 M2 PARRAMATTA M1 FAIRFIELD SYDNEY CBD SYDNEY CBD BANKSTOWN WEST CONNEX (under construction) FUTURE WESTERN SYDNEY AIRPORT LIVERPOOL MOOREBANK INTERMODAL M5 SYDNEY AIRPORT from Sydney Airport PORT BOTANY

3 PARRAMATTA CBD 20 minutes* FUTURE MOOREBANK INTERMODAL 30 minutes* SYDNEY CBD 40 minutes* SYDNEY AIRPORT 45 minutes* PORT BOTANY 55 minutes* FUTURE WESTERN SYDNEY AIRPORT 20 minutes* PENRITH BUILDING 3 PARRAMATTA SYDNEY PORT BOTANY CANBERRA MELBOURNE M7 NEWCASTLE BRISBANE M4

4 Address 60 Wallgrove Rd, Eastern Creek NSW Site Area Approx 22Ha Building Area Approx 110,000m 2 Zoning Planning Asking Rent Outgoings Hours Vehicle Access Estate Road IN1 General Industrial, Blacktown City Council SSD DA Approved $122/m 2 net $17/m 2 (estimate) 24 hours/7 days a week Designed for B Double, Super B Double and B Triple vehicles (STCA) Privately managed estate access road. Dedicated multi-directional signalised intersection.

5

6 *Plan indicative only and not to scale. BUILDING 3 AVAILABLE DECEMBER 2017 Building 3 at Calibre Eastern Creek will reset the benchmark for logistics real estate throughout Australia. * Warehouse 20,000m2 Dock Office 125m2 Office 900m 2 Awning Hardstand Parking 20m cantilevered 45m 137 spaces

7 BUILDING 3 & AMENITIES Boasting an architecturally designed office with high quality finishes and fixtures, Building 3 at Calibre Eastern Creek offers the perfect solution for your next corporate headquarters. Flexible open floor plates Double glazed facade LED lighting *Changes may be made during the development. Fittings and finishes are subject to change.

8 BUILDING CONSTRUCTION TRUCK LOADING ACCESS AWNING CLEARANCE HEIGHTS Office - Concrete and steel structure with high quality composite panel and glazed facades. 9 x on grade roller shutters 8 x recessed docks. Separate truck, car and pedestrian access. 20m deep cantilevered awning. 10.4m springing height. HARDSTAND INTERNAL SLABS SPRINKLERS POWER S 45m wide heavy duty hardstand. Designed for 9 tonne point loads with armoured joints. Early Suppression Fast Response K25 sprinkler system. Warehouse - 30VA/m 2 Office - 120VA/m 2 Fully air-conditioned with high quality finishes. OPERATING HOURS ZONING SUSTAINABILITY SOLAR PV 24 hours, 7 days a week. IN1 General Industrial. LED Lighting, Rainwater Harvesting, Smart Metering, Solar Hot Water System. Services provisions installed for a second office component. Flexibility for additional recessed docks. 100kW solar photovoltaic system. *The description is indicative only. Changes may be made during the development. Dimensions, areas, fittings, finishes and specifications are subject to change.

9 BUILDING 3 SINGLE USER OPTION Flexible warehousing and logistics solutions for 6,000 to 20,000m 2. Site 39,422m 2 Warehouse 20,000m2 Office & Amenities 950m2 Dock Office 125m2 Awning 3,204m 2 Hardstand 8,737m 2 Parking 137 spaces Subdivisable along multiple grids Split recessed docks Shared or secure hardstand 2 USER OPTION USER 1 Warehouse 6,000 14,000m2 Office Parking USER 2 950m2 93 spaces Warehouse 6,000 14,000m2 Office Parking 125m2 44 spaces Possible location of inter-tenancy wall *Plan indicative only and not to scale.

10 BUILDING 3 Building 3 will be constructed to maximise cubic capacity and efficiency, with the potential to store over 28,000 pallets.* Ridge Height 13.7m Springing Height 10.4m *indicative only. based on standard selective racking and 1200mm pallet height.

11 LEASE DETAILS Rate/m2 $122/m 2 Outgoings/m2 Estimate $17/m 2 Availability December 2017

12 FABIAN NAGER Development Director PETER DALE National Director Industrial MATTHEW FLYNN Director Industrial IMPORTANT NOTICE Mirvac does not give any warranty or make any representations, express or implied, about the completeness or accuracy of any information in this document or provided in connection with it. All photographs, maps and diagrams are indicative only and may not be exact or accurate. This document is not binding on Mirvac and is not intended to be relied upon. All persons should make their own independent enquiries as to the matters referred to in this document. Mirvac excludes, to the maximum extent permitted by law, any and all liability which may arise from the information contained in this documents. Correct as at June Mirvac projects Pty ltd ABN Version 1. June 2017.