Flight Force 14 + RACING DRONE WITH OBSTACLE COURSE. for ages

Transcription

1 Flight Force RACING DRONE WITH OBSTACLE COURSE for ages 14 +

2 TABLE OF CONTENTS Warnings and Cautions... 1 FCC Information... 5 Li-Po Battery Warning... 6 AAA Battery Precautions Charging the Drone's Battery... 7 Inserting the Controller Batteries... 7 Controller Synchronize the Drone with the Controller Set Your Speed... 9 Flying Your Drone...10 Ending Flight...10 Trimming the Drone Flight Time...13 Headless Mode Function...13 Return Home Function Assembling the Obstacles Taking Pictures and Videos Viewing Pictures and Videos Electronic Protection System Replacing Damaged Rotor Blades...18 Replacing the Drone's Cover...18 Using the WiFi Racer App Taking Pictures and Videos with the App...20 Care and Maintenance Specifications Warranty CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the unit s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. IMPORTANT SAFETY INSTRUCTIONS All of the safety and operating instructions should be read, adhered to and followed before the unit is operated. SAVE THESE INSTRUCTIONS 1

3 DANGER To reduce the risk of electric shock, burns, fire or injury: 1. Do not use while bathing or in a shower. 2. Do not place or store unit where it can fall or be pulled into a tub or sink. 3. Do not place in, drop or submerge in water or other liquid. 4. Do not reach for unit that has fallen into water. Unplug it immediately. 5. Care should be taken so that objects do not fall and liquids are not spilled onto the unit. WARNING 1. Close supervision is necessary when this appliance/product is used near children or mentally disabled individuals. 2. This drone is recommended for use by persons aged 14 and older. 3. Use this unit only for its intended use as described in this manual. 4. Unplug this unit during lightning storms or when unused for long periods of time. 5. Never drop or insert an object into any opening. 6. Protect the charging cable from being walked on or pinched, particularly at plug outlets, convenience receptacles and the point where it exits the unit. 7. Do not allow charging cable to touch hot surfaces. Wrap charging cable loosely around the unit when storing. 8. The unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves, or other units (including amplifiers) that produce heat. Avoid placing on top of stereo equipment that radiates heat. 8. Never block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked. 9. Do not carry this unit by charging cable or use cable as a handle. 10. Never operate this unit if it has a damaged cable, if it is not working properly, or if it has been dropped or damaged, or dropped into water. If the unit s charging cable or plug is damaged, do not attempt to fix it yourself. 11. To avoid the risk of electric shock, do not disassemble or attempt to repair the unit. Incorrect repair can cause risk of electric shock or injury to persons when unit is used. 12. Do not operate in the presence of explosive and/or flammable fumes. DRONE WARNINGS 1. The drone s blades revolve at high speeds and can cause damage to the user, spectators and animals. Stand away from the drone to reduce the risk of getting into the flight path and always maintain visual contact with the drone while flying. 2. Warn spectators that you will be flying your drone so that they are aware of its position. 3. Before flight, inspect the rotor blades to make certain that the blades are securely fastened to the drone. Do not use if there is any damage that impacts flight characteristics. 4. Before flying check your local laws and regulations pertaining to drone usage, particularly around airports. 5. Operating the drone in a wide-open space is recommended. The ideal space should have a 200-foot radius, without buildings, crowds, or electrical power lines. 6. Do not fly near tall buildings, high voltage cables, or other places that produce signal interference. Signal interruptions may result in accidents. 7. Parental guidance or adult supervision is suggested at all times. 8. If you are flying the drone with others, make sure all spectators are behind you and at least 6 feet from the drone. 2 3

4 9. For best performance, it is recommended that you operate the drone in zero wind conditions, as wind can greatly affect the performance of the aircraft. 10. Record responsibly. Respect the privacy of individuals when recording video or taking photos with the drone. 11. Obtain permission from individuals before circulating videos or photos taken with the drone. CAUTION: DO NOT ATTEMPT TO FLY THE DRONE IF THERE IS RAIN, SNOW, HEAVY WINDS, THUNDER OR LIGHTNING OUTDOORS. IT COULD DAMAGE YOUR PRODUCT AND MAY CAUSE BODILY HARM. WARNING! WARNING DO NOT FLY THE DRONE IN FOUL WEATHER! Choking/cutting hazard. Small parts/sharp rotor blades. Keep hands, hair and loose clothing away from the propeller when the power switch is turned to the ON position. Not suitable for children under 14 years old. Parental supervision recommended. WARNING! CHOKING HAZARD - Small parts. Not suitable for children under 3 years. FCC INFORMATION Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. This equipment complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This equipment may not cause harmful interference. 2. This equipment must accept any interference received, including interference that may cause undesired operation. WARNING: To comply with FCC's RF radiation exposure limits for general population/ uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. FCC ID: #2AKPPHELICUTE 4 5

5 LI-PO BATTERY WARNING This device contains a Lithium-Polymer battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal. Use only the supplied cable to recharge the battery. Improper charging may damage the battery and the device. Do not attempt to open the rechargeable battery or battery pack. There are no serviceable parts inside. Keep the battery out of reach of children. If swallowed, consult a physician immediately. Do not hit, throw, or drop the battery on any hard surface. Do not immerse the battery in water; keep in a dry, cool place. Do not overcharge the battery. Charge for one hour or less. Monitor the charging process. When storing the battery, store it with a partial charge. Do not store when fully charged or depleted. Do not expose the battery to high temperatures or dispose of battery in a fire as it may explode. The battery may also explode if damaged. BC AAA BATTERY PRECAUTIONS Dispose of used batteries properly. Do not dispose of batteries in a fire. Do not leave the batteries where a child or pet could play with or swallow them. If the batteries are swallowed, contact a physician immediately. The batteries may explode if mistreated. Do not attempt to recharge or disassemble the batteries. Use only fresh batteries of the required size and type. Do not mix old and new batteries, different types of batteries, or rechargeable batteries of different capacities. CHARGING THE DRONE'S BATTERY The Racing Drone includes a rechargeable Lithium-Polymer battery. Charge the battery before first use. To charge the drone's battery: 1. Remove the battery from the compartment on the underside of the drone. 2. Connect the charging cable to the charging terminal on the battery. 3. Insert the charging cable's USB connector into a USB port on an active device, such as a computer, USB adapter, or power bank. 4. The Charging Indicator in the USB end of the charging cable is red while charging, and turns off when the battery is fully charged. INSERTING THE CONTROLLER BATTERIES The controller uses 4 AAA batteries (included) which must be inserted before first use. To insert the controller's batteries: 1. Using the included screwdriver, open the battery cover on the back of the controller. 2. Insert 4 AAA batteries, following the polarity indicators. 3. Replace the battery cover. 6 7

6 CONTROLLER SYNCHRONIZE THE DRONE WITH THE CONTROLLER 1. Ensure that the battery has been fully charged (see Page 7) Insert the battery into the battery compartment on the underside of the drone and plug the battery's charging terminal into the drone. 3. Place the drone on a flat surface. 4. Press the controller's left control stick downward. 5. Slide the controller's ON/OFF switch to the ON position Very slowly, move the left control stick to its upper limit. You will hear a tone. 7. Move the left control stick down slowly. When the left control stick returns to its starting position in the lower section, you will hear another tone and the LED lights stop flashing. The controller and drone are now synchronized. 1. Speed Selector 2. Power LED 3. Left Control Stick 4. Left/Right Rotate Trim 5. Return Home Button 6. Headless Mode Button Forward/Backward Trim 8. Left/Right Trim 9. Right Control Stick 10. Camera LED 11. Camera Button 12. Smartphone Holder SET YOUR SPEED The drone has three speed settings. While learning to use the drone, it is advisable to start by using the slowest speed setting. To check and change the speed, press the Speed Selector on the controller. If you hear two tones, the drone is in slow speed. If you hear three tones the drone is in intermediate speed. If you hear a continuous series of tone the drone is in fast speed. 8 9

7 FLYING YOUR DRONE TRIMMING THE DRONE Use the controller's control sticks to fly your drone. The left control stick controls the ascent, descent, left turn and right turn. Move the stick slowly to avoid collisions and crashes. To ensure that your drone can fly straight and level, you must trim the aircraft. This can be done manually or automatically. The right control stick controls the forward, backward and lateral displacement (moving sideward without turning) in both directions. MANUAL TRIM Manual trim consists of calibrating the movement of your drone so it remains stable both in takeoff and in flight. NOTE: It is best to make final trim adjustments when the craft is airborne. (1) Left/Right Rotate Trim: Corrects unintentional movement in which the drone rotates left or right in a horizontal plane. Press in the opposite direction of the rotation. Press until the rotation stops. (2) Forward/Backward Trim: Corrects unintentional forward/backward motion. Press in the opposite direction of the unintentional motion. Press until the motion stops. ENDING FLIGHT (3) Left/Right Trim: Corrects unintentional lateral (side to side) movement. Press in the opposite direction of the unintentional motion. Press until the motion stops. To end your flight, switch off the controller and remove the battery from the drone. If you will not be flying again for several days, also remove the batteries from the controller

8 AUTOMATIC TRIM Automatic Trim resets the drone to its default settings. Automatic Trim is useful in situations such as: The aircraft has had an impact that has affected its gyroscope/electronic stabilizer. You have transported the aircraft from one place to another. Your drone does not maintain its fixed position when hovering. To reset using Automatic Trim: 1. Switch the controller's Power button to the ON position. 2. Move both left and right control sticks to the bottom-left. The LED lights will flash rapidly, indicating that the reset is in process. 3. After 10 seconds, return both control sticks to their initial position. The lights on the drone will stop flashing, indicating that the reset completed successfully. It is advisable to perform an Automatic Trim to reset to default settings fairly often. FLIGHT TIME Your drone's flight time varies depending on a range of factors, such as: The battery charge level The speed at which you fly your aircraft. The wind speed to which the aircraft is subjected. As a general rule, with the battery fully charged you can expect a continuous hovering flight time of up to 7 minutes. HEADLESS MODE FUNCTION You can set the forward direction of your drone to a cardinal point. For example, if the drone is pointing north when you activate Headless Mode, north will be the forward direction, regardless of the position of the front and back of the drone. To activate Headless Mode, before take-off press the Headless Mode button. You will hear tones from the controller, indicating that Headless Mode is activated. Headless Mode must be activated before take-off. To reset to a new direction, you must reboot the drone by disconnecting and reconnecting the drone's battery. To disable Headless Mode, press the Headless Mode button again. RETURN HOME FUNCTION The Return Home function allows you to bring the drone back to its starting position, moving backward based on the direction that was set on take-off. NOTE: Using this feature is not recommended until you are fully experienced with controlling your drone. To activate the Return Home function, press the Return Home Button. The drone will move in the backward direction, based on the direction set on take-off. To deactivate the Return Home function, perform any movement with the right control stick

9 ASSEMBLING THE OBSTACLES The obstacles are pre-cut on three foam core boards. Before assembling, remove each piece and pop out the foam from the pre-cut slots To assemble the landing pad: 1. Align the tabs in Part 1 (4 pieces) with the slots in the bottom of Part 2 and push to attach. To assemble the stunt ring: 1. Bend the ends of Part 5 along the pre-creased lines. 2. Align the slots in Part 5 with the slots in Part 3 and push to attach. To assemble the course flag: 1. Align the slot on Part 4 with the slot on the bottom of Part 6 and push to attach. 2. Align the slots in Part 7 with the tabs in the combined Part 4 and Part 6 and push to attach

10 TAKING PICTURES AND VIDEOS NOTE: Pictures are saved on an optional Micro SD card. See Page 17. To take pictures or videos with your drone, activate the camera by sliding the Camera Power switch backward, which is the ON position. The Camera LED on the controller will begin blinking. To take a picture, press the Camera button on the controller. A tone will sound. To take a video, press and hold the Camera button for 3 seconds. Two tones will sound, indicating that the video has started. To end the video, press and hold the Camera button again for 3 seconds. To turn off the camera, slide the Camera Power switch forward. Turning off the camera increases the flight time of your drone. NOTE: To take pictures and videos using the Racing Drone app, see Page 20. VIEWING PICTURES AND VIDEOS If you are using the Racing Drone app, you can view pictures and videos taken with the app on your smartphone. If you are not using the app, you can store pictures on a Micro SD card, purchased separately, and view them on a computer or other device that supports the Micro SD card format. To use a Micro SD card, slide the card into the Micro SD card slot on the bottom of the drone, under the antenna wire. Your pictures and videos will be stored on the card. To view the pictures and videos: 1. Carefully remove the Micro SD card from the drone. 2. Insert the Micro SD card into your viewing device, such as your computer. Ensure that the card is inserted correctly to avoid damaging the components. 3. Open the Devices list on your viewing device and locate the newly recognized storage device. 4. Open the storage device. You will see one folder for videos and one folder for photos. The photos are stored in JPG format; the videos are stored as MP4 files. If you are unable to open these standard formats, you can convert the files or download appropriate software. ELECTRONIC PROTECTION SYSTEM Your drone is equipped with a low-voltage protection system. When the drone's battery level is low, the control system will cut the power supply to the rotors. You must recharge the battery to resume flying

11 REPLACING DAMAGED ROTOR BLADES The drone has four rotors, two of which turn clockwise (A) and two turn counterclockwise (B). Four replacement rotor blades are included with your drone, two type A and two type B. If a rotor blade becomes damaged, replace it by removing the damaged blade and replace it with a new blade of the same type. If you need additional replacement rotor blades, contact Brookstone Customer Service at REPLACING THE DRONE'S COVER Your drone comes with a replacement drone cover in an alternate color. To change the drone cover: 1. Remove the drone's battery. 2. Squeeze the cover's arms to remove them from the slots to release the cover. 3. Gently pull the cover off. 4. Attach the new cover, fitting the arms into the slots, and replace the battery. To control your drone with the app: 1. Place the drone on a flat surface and connect the drone's battery. Ensure that the camera is turned on. 2. From your device's WiFi list, select Racing Drone. 3. Start the app on your device and tap INSTRUCTIONS to learn how to control your drone with the app. 4. After reviewing the instructions, tap CONTROLS on the Home screen. The control panel will display, and you will see a live image broadcast from the drone's camera. NOTE: To switch between Right Hand and Left Hand mode, tap SETTINGS on the Home screen and turn on Right Hand Mode. If you are not receiving a signal, disconnect the drone, restart your WiFi connection, and repeat the previous steps. Return to Home screen Take Photo Record Video Access Media Speed Track Route Show/Hide Controls Menu Flip Camera 18 USING THE WiFi RACER APP Instead of controlling your drone with the controller, you can control your drone with your smartphone or tablet using the WiFi Racer app. Go to the App Store SM (for Apple devices) or Google Play (for Android devices) to download the WiFi Racer app. NOTE: If the app is not listed in the App Store SM on an ipad, change filters to Supports iphone Only. App Store SM is a service mark of Apple Inc., registered in the U.S. and other countries. ipad and iphone are trademarks of Apple Inc., registered in the U.S. and other countries. Android and Google Play are registered trademarks of Google, Inc. Right Hand Mode: Throttle Left Hand Mode: Direction Left Hand Mode: Throttle Right Hand Mode: Direction Left/Right Rotate Trim Left/Right Trim Headless Mode Gyro Calibrate Forward/Backward Trim 19

12 TAKING PICTURES AND VIDEOS WITH THE APP To take pictures and videos with the WiFi Race Drone app, connect to the app as described on Page 18. On the top of the screen notice the icons representing a camera and a video recorder. Tap the icon to take pictures or videos. The pictures and videos will be stored on your mobile device and on the drone's Micro SD card, if one has been installed. Pictures and videos can also be accessed by tapping the Access Media icon in the app. CARE AND MAINTENANCE Clean with a soft, damp cloth. Do not use harsh cleaning agents. Do not submerge in water or other liquids. Check components regularly, such as the rotor blades, chassis, motors. If any component is damaged or worn, do not use the drone until the component has been repaired or replaced. Perform an Automatic Trim to reset fairly often. Check the drone's battery charge regularly. When storing, ensure that the battery is partially charged. Do not store the battery in a fully charged or discharged state. SPECIFICATIONS Drone Size...Approx. 5.5 x 5.5 x 1.6 in. (140 x 140 x 41 mm) Drone Weight...Approx. 1.8 oz (50 g) Signal Type GHz Controller Batteries...4 x 1.5V AAA Drone Battery...3.7V/450mAh Lithium Polymer Range...Up to 100 feet (30 meters) Movement Channels...4 Camera...720p HD 20 21

13 NOTES NOTES 22 23

14 ONE (1) YEAR LIMITED WARRANTY Brookstone warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser ( Warranty Period ). If a defect arises and a valid claim is received within the Warranty Period, at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product, or 3) provide a store credit in the amount of the purchase price of the original product. A replacement product or part, including a user-installable part installed in accordance with instructions provided by Brookstone, assumes the remaining warranty of the original product. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Brookstone s property. When a store credit is given, the original product must be returned to Brookstone and becomes Brookstone s property. Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty Service at Please be prepared to describe the product that needs service and the nature of the problem. A purchase receipt is required. All repairs and replacements must be authorized in advance. Service options, parts availability and response times will vary. You are responsible for delivery and the cost of delivery of the product or any parts to the authorized service center for replacement, per our instructions. Limits and Exclusions: Coverage under this Limited Warranty is limited to the United States of America, including the District of Columbia and the U.S. Territories of Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited Warranty applies only to products manufactured for Brookstone that can be identified by the Brookstone trademark, trade name, or logo affixed to them or their packaging. The Limited Warranty does not apply to any non-brookstone products. Manufacturers or suppliers other than Brookstone may provide their own warranties to the purchaser, but Brookstone, in so far as permitted by law, provides these products as is. This warranty does not apply to: a) damage caused by failure to follow instructions relating to product s use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage caused by service performed by anyone who is not a representative of Brookstone; d) accessories used in conjunction with a covered product; e) a product or part that has been modified to alter functionality or capability; f) items intended to be periodically replaced by the purchaser during the normal life of the product including, without limitation, batteries or light bulbs; g) any product sold as is including, without limitation, floor demonstration models and refurbished items; or h) a product that is used commercially or for a commercial purpose. BROOKSTONE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY. Some states disallow the exclusion or limitation of incidental or consequential damages or how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state

15 Find thousands more great ideas online Rev 1 Brookstone 2017 Brookstone.com Innovation Way, Merrimack, NH 03054