Bore Code 1 1/8" mm 121

Size: px
Start display at page:

Download "Bore Code 1 1/8" mm 121"

Transcription

1 /8" (2) Bore Model Number Model Number Code Leave blank if none desired D 2 X MR Metric M See pages.7,.3 &.34 Bore Code /8" mm 2 T Series HOW TO ORDER Sound limiters: Rod end -LF Includes PTFE. Under Stroke select letter(s) for desired Series Cap end -LR piston bearing and Stroke. Both ends -LFR X 2. Under Bore select 2 for /8" bore. Rubber Bumpers: Rod end -BF XK O OP Cap end -BR Seven Other Bore Sizes are Available Both ends -BFR Stroke Bore Bore Code See page / 2 " Adjustable extend stroke /6 TB TB TB 3 (Full stroke adjustment is standard) -AS /8 TC TC TC / 4 " /8 TD* TD TD 5 / 8 " Adjustable retract stroke (Over " adjustment add desired length, e.g. -RS2) -RS 5/8 TX TX TX 2" /8 TE TE TE 2 / 2 " Clevis mount: Ports in-line with slot -PM 3" Ports to slot -SM /8 TF TF TF 3/8 TG TG TG 4" Eye mount: Ports in-line with tang -EPM 5/8 TH TH Ports to tang -ESM 3. Under select letter(s) for desired action. 7/8 TI TI Threaded nose mount: Single rod -F 2 7/8 TJ 4. Under Prefix & Suffix Options Double rod, rod end -F 3 7/8 TK select letter(s) for desired options Double rod, cap end -F and add to model number. Double rod, both ends -F2 Grey shading EXAMPLES Magnetic piston & sensor mounting slot(s) -E indicates sensors are Order sensors separately. See page. not available. D-2-X Stroke length determines number of mounting Strokes are NOT affected by magnetic Single Rod, Double Acting Original Series, /2" stroke - /8" Bore - slots. See page,.32,.34 piston Option E TD-2-X-MR See pages.3.5 for general option information and pages.3,.32 &.34 for option T Series, 3/8" Stroke - /8" Bore - Single Rod, Double Acting - Male Rod Thread specifi cations of /8" bore models. * Note Sensors not available: D-2-XK, TD-2-XK, D-2-XDRK A complete library of cylinder CAD drawings is available from your local Fabco-Air Distributor or from the Fabco-Air web site Standard Strokes Original Series X XK O XDR XDRK ODR OP Stroke /8 A A A 3/6 B B B /4 C C C /2 D* D D 3/4 X X X E E E /4 F F F /2 G G G 3/4 H H 2 I I 3 J 4 K Single rod Double acting -X Double acting, Nonrotating Internal guide pins - 50 psi max -XK Single acting, spring retracted -O Single acting, spring extended -OP Double rod Double acting -XDR Double acting, Nonrotating Internal guide pins - 50 psi max -XDRK Single acting, spring retracted -ODR See pages.5 &.6 for Information. See pages.30 &.33 for Standard Specifi cations Suffix Options Male rod thread: Single rod Double rod, rod end Double rod, cap end Double rod, both ends PTFE seals -T Viton seals -V Quad seals -Q External guide, nonrotating for load guiding (See page.65) -G Hydraulic: Standard cover -H Hole thru double rod shaft: / 8 " hole -3 Plus size: 5/32" hole psi max Finish: ProCoat (Electroless Nickel) -N Stroke collar: /8" -C /4" -C2 3/8" -C3 /2" -C4 5/8" -C5 3/4" -C6 7/8" -C7 -MR -MR -MR -MR

2 -/8" (2) Bore Single Rod Standard Specifications X Double Acting Note : Strokes J, K, TJ, & TK have two #0-32 x.50 See page.6 for Push area =.99 Pull area =.80 Original = 2-SK "T" = 2-SKG B K 5/6-24 x E J, K, TJ & TK See Note Y Z.3 Strokes A D & TB TD are Ported on Opposite Sides XK Double Acting Nonrotating Note : Strokes J, K, TJ, & TK have two #0-32 x.50 See page.6 for Push area =.97 Pull area =.78 Original = 2-SK-K "T" = 2-SKG-K Random Rod Tolerance B2 K2 5/6-24 x E2 J, K, TJ & TK See Note Y2 Z2.3 Strokes A D & TB TD are Ported on Opposite Sides Stroke, Inches /8 3/6 /4 /2 3/4 /4 /2 3/ /6 /8 3/8 5/8 7/8 /8 3/8 5/8 7/8 2 7/8 37/8 Stroke, Letter A B C D X E F G H I J K TB TC TD TX TE TF TG TH TI TJ TK X Double Acting X Double Acting B E K Note Note Note Note Y Z Weight, lb XK Double Acting, Nonrotating XK Double Acting, Nonrotating B E K Note Note Note Note Y Z Weight, lb O Single Acting, Spring Retracted O Single Acting, Spring Retracted B NA* NA* NA* NA* E " " " " K Note Note " " Note Note " " Y3 Vent " " Vent " " Z " " " " Weight,. lb " " " " Preload, lb " " " " End of Stroke, lb " " " " OP Single Acting, Spring Extended OP Single Acting, Spring Extended B NA* NA* NA* NA* NA* NA* NA* NA* E " " " " " " " " K " " " " " " " " Y " " " " " " " " Z " " " " " " " " Weight, lb " " " " " " " " Preload, lb " " " " " " " " End of Stroke, lb " " " " " " " " N/A* = Not Available O Single Acting Spring Retracted Note : Strokes H, I, TH & TI have two #0-32 x.50 See page.6 for Push area =.99 See chart for Spring Forces: Preload and End of Stroke. Original = 2-SK "T" = 2-SKG Rod End Face B3 K3 Original Series Y3 5/6-24 x E3 H, I, TH & TI See Note.40 Rod End Vent Strokes A D & TB TD Z3 Rod End Vent Strokes X I & TX TI.3 OP Single Acting Spring Extended See page.6 for Pull area =.80 See Chart for Spring Forces: Preload & End of Stroke Original = 2-SK "T" = 2-SKG B4 "T" Series + Stroke K4 Y4 5/6-24 x E4 Strokes A D & TB TD are Ported on Opposite Sides NA* = Not Available Z

3 -/8" (2) Bore Also See Pg..30 Option Specifications Prefix Option -M Metric Cylinder & Rod Thread, 28.5mm Bore Also see Option Information on page.7. Original Series Stroke mm Stroke Letter A B C D X E F G H I J K T Series Stroke mm Stroke Letter TB TC TD TX TE TF TG TH TI TJ TK Mounting Holes 5.3mm Diameter Thru 8.8mm C'Bore x 5.3mm Dp. 2 Places for M5 SHCS Except strokes J, K, TJ & TK which have two M5 x 2.0mm Dp. Thread Pitches M5 = 0.8mm M8 =.25mm M8 x 9.0 Conversion Factor Inches x 25.4 = mm 42.8mm Bolt Circle Standard Female Rod Thread M8. Male Rod Thread Option -MR shown. G/8 Ports with 4mm Spotface The Suffix Options charted on the right are available on Original and T Series with the s indicated ( ). They require no dimensional changes from the Standard Specifications on page.30. Also see Option Information on pages.7 thru.5. Suffix Options -PM & -SM Clevis Mount Also see Option Information on page B See Page Note Note : Hole Diameter =.335 Pin Diameter =.325 Pin (46 Stainless Steel) and Clips are included -PM IN LINE with Slot -SM to Slot T V Q H N C C7 LF LR LFR BF BR BFR -X -XK NA NA NA NA -O NA NA NA NA NA NA -OP NA NA NA Suffix Options -EPM & -ESM Eye Mount Also see Option Information on page B See Page EPM IN LINE with Tang.00 -ESM to Tang Oil filled bushings Oil filled bushing EM-2 Eye Bracket Kit Mates with Clevis Mount above. Order separately..27 Dia. 4 Places for Flat Head Screws Four /4-20 x 3/4" FH(#2)M Screws are included Material: Zinc Die Casting Hole.335 Oil filled bushing is standard.69 PM-2 Clevis Bracket Kit Mates with Eye Mount above. Order separately..27 Dia. 4 Places on Square Pattern for Flat Head Screws. Four /4-20 x 3/4" FH(#2)M Screws are included Material: Zinc Die Casting.69 Hole.335 Pin.325 Pin (46 Stainless Steel) & Clips are included. Oil Filled Bushings are Standard. RC-3 Rod Clevis and Pin Threaded Stud mates with Female Rod thread in Pancake Cylinders. Slot & Pin Mate with EM-04 Eye Bracket shown on the right. Materials: Clevis Steel, Black Oxide Stud Steel Pin 46 Stainless Steel Pin & Clips are included.25 Pin Diameter /6-24 Optional Metric #MRC-3 M8 x 9.7mm EM-04 Eye Bracket Kit Mates RC-3 Rod Clevis shown on the left..27 Dia. 4 Places for Flat Head Screws Four /4-20 x 3/4" FH(#2)M Screws are included Material: Zinc Die Casting Hole.25 Oil filled bushing.6 is standard

4 -/8" (2) Bore Also See Pg..30 Option Specifications Suffix Option -MR Male Rod Thread Available on Original and T Series with s: -X, -XK, -O, -OP. 5/6-24 x 0.75 Also see Option Information on page.8. Suffix Option -RS Adjustable Retract Stroke Also see Option Information on page.. 9/6 Hex Nut Adjusting Screw.042 Stroke Adjustment Per Revolution.7 Strokes " & Shorter =.38 Max. + Stroke Strokes " & Longer =.38 + Adjustment.3 + B Standard Adjustment is " (-OP Only Use B4 as shown on page.30. No additional length is required.) Suffix Option -F Threaded Nose Mount -4 Also see Option Information on page B /8 Hex.9 Part No Mounting Nut is included Material: Zinc Plated Steel Pilot Dia. = Pilot Length =.3 Suffix Option -E Specifies Magnetic Piston and Dovetail Mounting Slot(s) Strokes are NOT affected by magnetic piston. Note: Alloy steel mounting bolts may effect sensing. Stainless steel or other non-magnetic bolts are recommended. /4" 60 Dovetail Profile of Sensor & Mounting Slot. /8" (2) Bore Sensors available for D & TD strokes and longer. Strokes D & TD are ported on opposite sides. # # Sensor Slots at Positions # and # 2 Sensor Slot at Position # only Sensors Must be Ordered Separately See Sensor Models Available page Quick Reference to Standard Strokes Use the appropriate Stroke Letter in the Model Number Available on Original Series Stroke X XK / D Not Available 3/ X X E E / F F / G G 3/ H H I I J J K K Available on T Series Stroke X XK 3/ TD Not Available 5/ TX TX 7/ TE TE / TF TF 3/ TG TG 5/ TH TH 7/ TI TI 2 7/ TJ TJ 3 7/ TK TK Suffix Option -AS Adjustable Extend Stroke Available on Original Series with s: -X, -XK, -O Also see Option Information on page.. BB D C E Stroke Inches /8 3/6 /4 /2 3/4 -/4 -/2-3/ Stroke Letter A B C D X E F G H I J K s: -X, -XK BB s:-o BB NA NA C D E Dia..3 Dia..050 Stroke Adjustment Per Revolution

5 -/8" (2) Bore Double Rod Standard Specifications XDR Original Series Double Rod, Double Acting Note : Strokes J & K have two #0-32 x.50 See page.6 for Mounting Bolts Force Area =.80 Seal Kit = 2-SK Stroke, Inches /8 3/6 /4 /2 3/4 /4 /2 3/ Stroke, Letter A B C D X E F G H I J K B E K Note Note Y Z Weight, lb B K + Stroke Y 5/6-24 x E J & K See Note Z.47 Strokes A D are Ported on Opposite Sides XDRK Original Series Double Rod, Double Acting, Nonrotating Note : Strokes J & K have two #0-32 x.50 See page.6 for Mounting Bolts Force Area =.78 Seal Kit = 2-SK-K Random Rod Tolerance 5/6-24 x E J & K See Note Stroke, Inches /8 3/6 /4 /2 3/4 /4 /2 3/ Stroke, Letter A B C D X E F G H I J K B E K Note Note Y Z Weight, lb Y B Z K.47 + Stroke Strokes A D are Ported on Opposite Sides ODR Original Series Double Rod, Single Acting, Spring Retracted Note : Strokes H & I have two #0-32 x.50 See page.6 for Mounting Bolts Force Area =.80 Seal Kit = 2-SK Stroke, Inches /8 3/6 /4 /2 3/4 /4 /2 3/4 2 Stroke, Letter A B C D X E F G H I B E K Note Note Y Rod End Vent Face Z Weight, lb Spring Return Forces, lb. Preload End of Stroke B K + Stroke 5/6-24 x E H & I See Note.40 Rod End Vent Strokes A D Rod End Vent Strokes X I Y Z

6 -/8" (2) Bore Also See Pg..33 Option Specifications Prefix Option -M Metric Cylinder & Rod Thread, 50.8mm Bore Available on Original Series with s: -XDR, -XDRK, -ODR Also see Option Information on page.7. Stroke mm Stroke Letter A B C D X E F G H I J K Mounting Holes 5.3mm Diameter Thru 8.8mm C'Bore x 5.3mm Dp. 2 Places for M5 SHCS Except strokes J, K, TJ & TK which have two M5 x 2.0mm Dp. Thread Pitches M5 = 0.8mm M8 =.25mm 42.8mm Bolt Circle Standard Female Rod Thread M8. Male Rod Thread Option -MR shown. M8 x 9.0 Conversion Factor Inches x 25.4 = mm G/8 Ports with 4mm Spotface The Suffix Options charted on the right are available on Original Series with the s indicated ( ). They require no dimensional changes from the Standard Specifications on page.33. Also see Option Information on pages.7 thru.5. T V Q H N C C7 LF LR LFR BF BR BFR 3 6 -XDR -XDRK NA NA NA NA NA -ODR NA NA NA NA NA NA Suffix Options -MR, -MR, -MR2 Male Rod Thread Available on Original Series with s -XDR, -XDRK, -ODR. For Rod End only use MR For Cap End only use MR For Both Ends use MR2 Also see Option Information on Page.8. 5/6-24 x 0.75 Suffix Options -F, -F, -F2 Threaded Nose Mount Available on Original Series with s -XDR, -XDRK, -ODR. For Rod End only use -F For Cap End only use -F For Both Ends use -F2 Also see Option Information page Pilot Dia. = Pilot Length = /8 Hex B + Stroke Part No Mounting Nut is included Material: Zinc Plated Steel Suffix Option -E Specifies Magnetic Piston and Dovetail Mounting Slot(s) Sensors Must Be Ordered Separately Strokes are NOT affected by magnetic piston. See Sensor Models Available page /8" (2) Bore Note: Alloy steel mounting bolts may effect sensing. Stainless steel or other non-magnetic bolts are recommended. /4" 60 Dovetail Profile of Sensor & Mounting Slot. Sensors available for D strokes and longer. Stroke D is ported on opposite sides. # # Sensor Slots at Positions # and # 2 Sensor Slot at Position # only Quick Reference to Standard Strokes Use the appropriate Stroke Letter in the Model Number Available on Original Series Stroke XDR XDRK / D Not Available 3/ X X E E / F F / G G 3/ H H I I J J K K

DM/..., DC/95000, DM/..., DC/96000

DM/..., DC/95000, DM/..., DC/96000 D/..., DC/95000, D/..., DC/96000 Compact cylinders Single acting Ø 12 to 50 mm ight weight Compact design, which is considerably shorter than IS/VD or NF equivalent. ow friction characteristics for high

More information

Housings & Accessories

Housings & Accessories HYDRA FORCE Housings & Accessories HydraForce offers standard cartridge valve housings and custom integrated circuit manifolds in aluminum, ductile iron, and steel. ALUMINUM HOUSINGS: Standard high tensile

More information

BULLETIN MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS

BULLETIN MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS BULLETIN 74.00-2 MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22 B2 B20 B19

More information

Short Stroke Cylinders ISO Bores from 12 to 100 mm

Short Stroke Cylinders ISO Bores from 12 to 100 mm Standard executions Version Symbol Type with female thread with male thread magnetic with female thread magnetic with male thread BI BMI BIM BMIM Series of short stroke cylinders standard to ISO 5524 magnetic

More information

Suffix for Disc Material Size A B C I.D. O.D. B.C. Holes Black White

Suffix for Disc Material Size A B C I.D. O.D. B.C. Holes Black White Wet-R-Dri Valve A TA STYLE LIGHTWEIGHT COMPACT VERSATILE B I.D. Size Standard Model Detent Model Standard Material Max. Working Body Disc Pressure WD00 AL B. WD0 AL B. Aluminum WD00 GI B. WD0 GI B. Grey

More information

RCI 400 Series Actuators

RCI 400 Series Actuators PNEUMATIC RCI 400 Series Actuators TECHNICAL DATA SHEET The Remote Control RCI 400 Series offers a lower cost alternative to our highly successful scotch yoke design. The addition of this product broadens

More information

Equipment Catalog. For inquiries and orders, please contact:

Equipment Catalog. For inquiries and orders, please contact: Equipment Catalog 1 2 Table of contents...pages Force Flow 100 Lube Pump... 4 Bucket Pumps... 5 Packing Injection Fitting Body Vent (Bleeder) Fittings... 6 1200 & 1500 Lube Pumps... 7 Hose Assemblies Gages

More information

DESCRIPTION UOM KEI# OEM#

DESCRIPTION UOM KEI# OEM# ADAPTOR SCREW EA. AS-1070 755A010 AIR HOSE, NYLON AMERICAN STYLE, 20" EA. AS-3563 ---------- AIR HOSE, NYLON EUROPEAN STYLE, 20" EA. AS-3564 AIR HOSE, STAINLESS STEAL AMERICAN STYLE, 20" EA. AS-3565 ----------

More information

BALL JOINT AS SEM BLIES

BALL JOINT AS SEM BLIES od End Ball Joints (Male) Bearing aceway - ocked in by annular groove-trunnion design. BA JOINT AS SEM BIES Outer Member (Housing) - ow carbon steel, plated plus dichromate treated for corrosion resistance.

More information

PARTS MANUAL LKO-100D ORANGE PEEL GRAPPLES V12153 X

PARTS MANUAL LKO-100D ORANGE PEEL GRAPPLES V12153 X PARTS MANUAL LKO-00D ORANGE PEEL GRAPPLES V5 X TABLE OF CONTENTS LKO-00D ORANGE PEEL GRAPPLE Information Identification Number ---------------------------------------- Nomenclature ---------------------------------------------------

More information

CD Capacitor Discharge The Process

CD Capacitor Discharge The Process CD Capacitor Discharge The Process. CD. Capacitor Discharge Why CD Studs are better CD. Capacitor Discharge General Specifications Weld Base: CD. Stud Load/Torque Strengths Stud Material Stud Size Maximum

More information

D-SUBMINIATURE DESCRIPTION/APPLICATION DESIGN ADVANTAGES D-SUB INDEX. IDC Systems D-Subminiature

D-SUBMINIATURE DESCRIPTION/APPLICATION DESIGN ADVANTAGES D-SUB INDEX. IDC Systems D-Subminiature DESCRIPTION/APPLICATION Fine Pitch D-Sub Connectors are designed for reliable interfaces in modern, high-density applications. Conforms with SCSI 2/3 internal cabling specification. The low-profile design

More information

DOORS/HATCHES DOORS/HATCHES LET US KNOW YOUR REQUIREMENTS WATERTIGHT DOORS HATCHES SCUTTLES PORT LIGHTS PHONE FAX

DOORS/HATCHES DOORS/HATCHES LET US KNOW YOUR REQUIREMENTS WATERTIGHT DOORS HATCHES SCUTTLES PORT LIGHTS PHONE FAX DOORS/HATCHES WATERTIGHT DOORS HATCHES SCUTTLES PORT LIGHTS LET US KNOW YOUR REQUIREMENTS 7 #00 -DOG FUMELIGHT DOOR #0 4-DOG WEATHERTIGHT DOOR #0 6-DOG WATERTIGHT DOOR #0 6-DOG SQUARE CORNER DOOR #04 6-DOG

More information

Wave Spring Introduction

Wave Spring Introduction Wave Spring Introduction All Springs Are Not Equal Smalley Wave Springs offer the unique advantage of space savings when used to replace coil springs. By reducing spring operating height, wave springs

More information

Iron Check Valves & Y-Strainers Illustrated Index

Iron Check Valves & Y-Strainers Illustrated Index Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead

More information

High Performance Thread Rolling Screw for Metal

High Performance Thread Rolling Screw for Metal High Performance Thread Rolling Screw for Metal Features / Benefits ROLOK thread rolling fasteners for metals offer a unique spiral thread form to achieve excellent drive-to-strip performance in many challenging

More information

Mechanical Requirements for Stainless Steel & Non-Ferrous Fasteners

Mechanical Requirements for Stainless Steel & Non-Ferrous Fasteners Mechanical Requirements for Steel & Non-Ferrous Fasteners Grade(1 ) General Descriptio n of Material Bolts, Screws and Studs Full Size Bolts, Screws, Studs Yield (2) Strengt h Min Tensile Strengt h Min

More information

Base Models: 1-22SV Major Components GOULDS PUMPS. Commercial Water

Base Models: 1-22SV Major Components GOULDS PUMPS. Commercial Water Base Models: 1-22SV Base Models: 1-22SV F, P, R VERSIONS 1 Pump Body Stainless Steel AISI 304 EN 10088-1-X5-CrNi-10 (1.4301) 2 Impeller Stainless Steel AISI 304 EN 10088-1-X5-CrNi-10 (1.4301) 3 Diffuser

More information

TUFFALOY. Resistance Welding Products. Leader in the Industry Since Catalog 2014

TUFFALOY. Resistance Welding Products. Leader in the Industry Since Catalog 2014 Catalog 2014 Resistance Welding Products Leader in the Industry Since 1937 Resistance Welding Equipment & Supplies Service Sales Consulting Seminars table of contents RESISTANCE WELDING PRODUCTS The little

More information

1 1 4" FRAMING SYSTEM

1 1 4 FRAMING SYSTEM 4" FRAMING SYSTEM A000 (4 Gauge)...6-70 A00 (4 Gauge)...7-7 A4000 ( Gauge)...7-74 A000 (4 Gauge)... 7 Channel Nuts and Closure Strips...76-77 Flat Plate Fittings... 77 Ninety Degree Fittings...77-78 Z

More information

Slide Retainers. Tapped Dowel. Maximum. Catalog Number. Shoulder Pin. Screw Weight

Slide Retainers. Tapped Dowel. Maximum. Catalog Number. Shoulder Pin. Screw Weight Slide Retainers A compact method of slide retention that eliminates the use of springs or costly hydraulic systems. Interference with machine tie bars or safety gates is eliminated because the slide retainer

More information

P600 Pressure Regulator

P600 Pressure Regulator P00 Pressure Regulator The BelGAS P00 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with

More information

Mechanical Properties - Standard. Standard Mild Steel Studs AWS Type A

Mechanical Properties - Standard. Standard Mild Steel Studs AWS Type A General Material Specifications Material Specifications Nelson s studs may be made of one of the following materials, as specified on individual specification sheets. Certificates of chemical analysis

More information

Catalog 2009 TUFFALOY. Resistance Welding Products. Leader in the Industry Since 1937

Catalog 2009 TUFFALOY. Resistance Welding Products. Leader in the Industry Since 1937 Catalog 2009 Resistance Welding Products Leader in the Industry Since 1937 table of contents ELECTRONICS STANDARD ELECTRODES RESISTANCE WELDING PRODUCTS The little man is now seventy years old. It was

More information

Mounting Brackets E39-L/F39-L Slits/Reflectors E39-S/E39-R CSM_E39-L_F39-L_E39-S_E39-R_DS_E_3_1. Iron, zinc plating 2

Mounting Brackets E39-L/F39-L Slits/Reflectors E39-S/E39-R CSM_E39-L_F39-L_E39-S_E39-R_DS_E_3_1. Iron, zinc plating 2 Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-00 0 Ph: + Fax: 0 E-mail: info@intechchennai.com Website: www.intechchennai.com Mounting Brackets E-L/F-L Slits/Reflectors E-S/E-R CSM_E-L_F-L_E-S_E-R_DS_E

More information

C ompact, lightweight, 30-Ton Stressing Jacks 6DAH 306 6DAH 308 6DAH double-acting ideal for. elevated construction projects.

C ompact, lightweight, 30-Ton Stressing Jacks 6DAH 306 6DAH 308 6DAH double-acting ideal for. elevated construction projects. 30-Ton Stressing Jacks PHI0105 Rev. B 01/15 6DAH 306 6DAH 308 6DAH 3012 Precision-Hayes International manufactures the 6DAH-Series jacks from a hardened steel to exacting specifications. The result is

More information

Water & Industrial Products Catalog

Water & Industrial Products Catalog Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the

More information

HIGH PERFORMANCE MALE ROD ENDS - ALUMINIUM. Dimensions in Inches. d 2. Ref

HIGH PERFORMANCE MALE ROD ENDS - ALUMINIUM. Dimensions in Inches. d 2. Ref ROD ENDS SRE Australia supply a comprehensive range of quality Rod Ends www.sreaustralia.com.au SRE Australia Products & Services SRE Australia Pty Ltd was established February 2010, manufacturing Spherical

More information

HLAG/HLBG Series. Specifications. Switch specifications. Thin parallel hand with rubber cover (bush type/bearing type) Double acting

HLAG/HLBG Series. Specifications. Switch specifications. Thin parallel hand with rubber cover (bush type/bearing type) Double acting G G B A S F J L2 L2 H2 LB2 N/ S/F Specifications Descriptions Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational

More information

P133 Pressure Regulator

P133 Pressure Regulator P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial

More information

Compact cylinders ADNGF, standard port pattern

Compact cylinders ADNGF, standard port pattern Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The

More information

Compact cylinders ADNGF, standard port pattern

Compact cylinders ADNGF, standard port pattern Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The

More information

3 Coating thickness. Quick-Finder Coating thickness. Do you have questions about SAUTER coating thickness? SAUTER Model

3 Coating thickness. Quick-Finder Coating thickness. Do you have questions about SAUTER coating thickness? SAUTER Model 3 Page TB Your reliable worktool for every day: light, easy, precise TC Your constant companion - compact and easy to use TE Easy-to-operate, ideal to handle by external sensors TF TG Premium measuring

More information

A measured step forward

A measured step forward A measured step forward TM 1730 Series Parts List Contents Code Number Configuration - Model 1730... 2 General Parts...3 Manual Stroke Length Assembly... 7 Speed Reducer...9 Plunger Assembly - Standard...

More information

FILLING & RELATED PROCESS IMPROVEMENTS. phdinc.com (800) INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP

FILLING & RELATED PROCESS IMPROVEMENTS. phdinc.com (800) INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P FILLING phdinc.com (800) 624-8511 & RELATED PROCESS IMPROVEMENTS

More information

PRESSURE REGULATORS. GUIDE to REGULATORS and SERVO VALVES

PRESSURE REGULATORS. GUIDE to REGULATORS and SERVO VALVES Master Pneumatic regulators are made in a wide range of sizes to suit nearly all industrial requirements for pneumatic pressure regulation. Good pressure regulation is essential to the efficient use of

More information

PHP8 & PHP30 Series Hydraulic Pushers

PHP8 & PHP30 Series Hydraulic Pushers SPX Corporation 5885 th Street Rockford, IL 609-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 54-48 Fax: (800) 288-703 PHP8 PHP8H

More information

Compact cylinders ADNGF, standard port pattern

Compact cylinders ADNGF, standard port pattern Key features and type codes At a glance With guide rod and yoke plate ADNGF- With guide rod, yoke plate and through piston rod ADNGF- -S2 Cushioning types Mode of operation Application Cushioning P The

More information

Accessories / Screwlocks

Accessories / Screwlocks 3401-022 Accessories / Screwlocks Product Features Male or female screwlocks Residual magnetism level - Brass parts: NMB (200 Gamma max) - Stainless Steel parts: NMB (200 Gamma max) 1 part number for 1

More information

BALL JOINT AS SEM BLIES Sec. 24 Rod End Ball Joints (Male)

BALL JOINT AS SEM BLIES Sec. 24 Rod End Ball Joints (Male) BA JOINT AS SEM BIES Sec. 24 od End Ball Joints (Male) Bearing aceway - ocked in by annular groove-trunnion design. Outer Member (Housing) - ow carbon steel, plated plus dichromate treated for corrosion

More information

DRAINS: & , S COMMERCIAL. Drains: Bath, Shower & Commercial

DRAINS: & , S COMMERCIAL. Drains: Bath, Shower & Commercial DRAINS: BATH,, SHOWER &, S COMMERCIAL SHOWER DRAINS GENERAL PURPOSE DRAINS FIT-FLUSH CLEAN-OUTS BATH WASTES BATH WASTES KITS/PARTS/COMPONENTS BATH DRAIN BODIES/ASSEMBLIES BATH DRAIN KITS/PARTS/COMPONENTS

More information

Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available.

Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available. 1 Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available. 2 Note: Above dimensions will vary due to manufacturer s tolerances. Metric sizes also available. 3 Note:

More information

KTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries

KTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and

More information

E-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB

E-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2

More information

Tel : , Fax : P.O Box No , Dubai Investment Park 1 Dubai - United Arab Emirates

Tel : , Fax : P.O Box No , Dubai Investment Park 1 Dubai - United Arab Emirates Tel : +971 4 8858907, Fax : +971 4 8854316 PO Box No 88490, Dubai Investment Park 1 Dubai - United Arab Emirates E-mail : sales@metallicboltscom, Web : wwwmetallicboltscom About Metallic Bolts Metallic

More information

Pipe. Valves. Fittings. Fasteners. Tube and Tube Fittings. And Much More

Pipe. Valves. Fittings. Fasteners. Tube and Tube Fittings. And Much More Pipe Valves Fittings Fasteners Tube and Tube Fittings And Much More Tubing Sizes Materials 1/16" to 6" Diameter Stainless A269 & A511 Copper Monel Inconel Hastelloy DK Lok Tube Fittings Sizes Products

More information

D*M High Density 104 Contacts 90 Bent PCB Terminations

D*M High Density 104 Contacts 90 Bent PCB Terminations Features/Benefits Compliant with ESA/ESCC specification Solderable PCB terminations Available with ot without brackets High density layouts Typical Applications Space equipments Avionics / Military Industrials

More information

ORBIT Valves STANDARD FEATURES

ORBIT Valves STANDARD FEATURES ORBIT Valves STANDARD FEATURES Cameron s ORBIT valves are ideal for applications when zero leakage and frequent operation are demanded. They are used globally in gas processing plants using molecular sieve

More information

NEW Items. Wire Rope and Accessories. Eye Nuts, Bolts and Turnbuckles. Roller Chain. kent-automotive.com NI1

NEW Items. Wire Rope and Accessories. Eye Nuts, Bolts and Turnbuckles. Roller Chain. kent-automotive.com NI1 In the digital version, you can navigate to each section by clicking on the page numbers. You can return to the Table of Contents by clicking in the header. Wire Rope and Accessories Wire Rope Commercial

More information

PARTS CATALOG 6000/6001 ELITE SERIES SURGICAL TABLES INCLUDING BATTERY MODELS

PARTS CATALOG 6000/6001 ELITE SERIES SURGICAL TABLES INCLUDING BATTERY MODELS PARTS CATALOG 6000/6001 ELITE SERIES SURGICAL TABLES INCLUDING BATTERY MODELS Page i 1. TOP & SIDE FRAME ASSEMBLIES, 6001.... PAGE 2 2. TOP & SIDE FRAME ASSEMBLIES, 6000.... PAGE 6 3. SIDE FRAME & HYDRAULIC

More information

The Convenience Stores For Metal

The Convenience Stores For Metal STEEL BARS Data and Specifications C1018 Cold Finished Bar A low carbon steel with medium manganese content. Applications: Cold forming and bending operations (for severe bends stress relieving may be

More information

DIN 3015 CLAMPS B1-1 PN# / / ACC

DIN 3015 CLAMPS B1-1 PN# / / ACC DIN 0 CLAMPS DIN 0 Clamps HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. HYDAC clamps assure a simple, reliable dampening support for lines

More information

CDLR Catalog. Lathrup Industries, Inc W. Nine Mile Rd. Novi, MI Phone: (248) Fax: (248)

CDLR Catalog. Lathrup Industries, Inc W. Nine Mile Rd. Novi, MI Phone: (248) Fax: (248) CDLR Catalog Lathrup Industries, Inc. 42300 W. Nine Mile Rd. Novi, MI 48375 Phone: (248) 349-1009 Fax: (248) 349-1062 1 Table of Contents Standard Specifications pg. 2 CDLR Dimentions Chart pg. 3 CDLR

More information

EXH HEAT-SINK ALUMINIUM ENCLOSURE

EXH HEAT-SINK ALUMINIUM ENCLOSURE EXH HEAT-SINK ALUMINIUM ENCLOSURE EXH series is an aluminium enclosure with a highly efficient heat-sink top cover. Suitable to be used as fanless PC, power amplifier, and power supply box where heat dissipation

More information

Product Evaluation Report

Product Evaluation Report Product Evaluation Report PER-09040 Page 1 of 5 This Document Published By: Initial Listing Re-Approved 5/12/2010 Progressive Engineering Inc. 58640 State Road 15 Goshen, Indiana 46528 574-533-0337 www.p-e-i.com

More information

Iron, zinc plating. (with spring and plain washers) Nuts M4 Iron, zinc plating 2

Iron, zinc plating. (with spring and plain washers) Nuts M4 Iron, zinc plating 2 Mounting Brackets E-L/F-L Slits/Reflectors E-S/E-R CSM_E-L_F-L_E-S_E-R_DS_E Mounting Brackets Model Fitting materials Count E-L Iron, zinc plating Accessories Applicable sensor Page (mounting pitch on

More information

Atlas Column Forms COLUMN FORM SYSTEMS MULTI-CHANNEL AL-SPEED

Atlas Column Forms COLUMN FORM SYSTEMS MULTI-CHANNEL AL-SPEED COLUMN FORM SYSTEMS Atlas Column Forms AL-SPEED MULTI-CHANNEL Atlas offers AL-SPEED aluminum and Atlas Multi-Channel high strength, adjustable steel column form systems. Both systems offer the advantages

More information

Continuous Cast Iron. Your foremost provider of specialty products, services and solutions

Continuous Cast Iron. Your foremost provider of specialty products, services and solutions Continuous Cast Iron Your foremost provider of specialty products, services and solutions Quik Guide Continous Cast Iron Quik Guide TYPE DURA-BAR MACHINABILITY GRADE RATING 1 TYPICAL APPLICATIONS G1 125%

More information

Cobra. Innovative shielded low profile right angle connector plug and backshell assemblies reduce MIGHTY MOUSE

Cobra. Innovative shielded low profile right angle connector plug and backshell assemblies reduce MIGHTY MOUSE MIGHTY MOUSE Cobra The Ultra-Low Profile EMI/RFI Plug and ackshell Assembly Innovative shielded low profile right angle connector plug and backshell assemblies reduce clearance requirements without compromising

More information

Pressure Regulators K Series

Pressure Regulators K Series Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters

More information

2/2 % ) Direct Acting Subminiature Solenoid Valves. 1/8" and 1/4" NPT. Features. Construction. Electrical

2/2 % ) Direct Acting Subminiature Solenoid Valves. 1/8 and 1/4 NPT. Features. Construction. Electrical ANSI Accredited Program PRODUCT CERTIFICATION 4 Direct Acting Subminiature Solenoid Valves /8" and /4" NPT / 856 -WAY Features -way normally closed operation Compact design Brass and 6 stainless steel

More information

Flextray - Accessories

Flextray - Accessories Flextray - 40 Flextray - Protects cable from debris and dust Adds security to cable installation Easy bend-over tabs secure cover to trays Available for 2 (50mm) to 24 (600mm) wide trays Comes in 118 (2997mm)

More information

MGF TECHNICAL FILE MGF 400 SERIES STRUT. Description. Product Notes.

MGF TECHNICAL FILE MGF 400 SERIES STRUT. Description. Product Notes. Description Highly versatile, simple to assemble, heavy duty, modular bracing strut system designed primarily to be used as intermediate struts with MGF hydraulic bracing systems. The system can also be

More information

The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16.

The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16. The following excerpt are pages from the North merican Product Technical Guide, Volume 2: nchor Fastening, Edition 16. Please refer to the publication in its entirety for complete details on this product

More information

Masoneilan * Series Control Valve

Masoneilan * Series Control Valve GE Oil & Gas Masoneilan * 72000 Series Control Valve Large Mass Flow Energy Management Control Valves Technical Specifications 05/2013 Table of Contents Introduction...3 Product Features...3 General Data...5

More information

The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17.

The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 17. The following excerpt are pages from the North merican Product Technical Guide, Volume 2: nchor Fastening, Edition 17. Please refer to the publication in its entirety for complete details on this product

More information

Series AMR. Magnet Type Rodless Cylinder. Bore size(mm) : ф10, ф16, ф20, ф25, ф32, ф40 W13 G H AMRB. How to Order A - 268

Series AMR. Magnet Type Rodless Cylinder. Bore size(mm) : ф10, ф16, ф20, ф25, ф32, ф40 W13 G H AMRB. How to Order A - 268 Magnet Type Rodless Cylinder Bore size : ф10, ф16, ф0, ф5, ф3, ф40 PRECISION STINLESS BODY FOR SMOOTH CTUTION LIHT WEIHT COMPCT DESIN LEK FREE NON - LUBRICTION STNDRD POSITION SENSIN CPBLE How to Order

More information

Type 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle

More information

P630 HIGH FLOW GAS REGULATOR

P630 HIGH FLOW GAS REGULATOR P60 HIGH FLOW GAS REGULATOR P60 HIGH FLOW GAS REGULATOR Stainless Steel Internals are Standard Steel Units comply with NACE MR0 Durable Powder Coated Exterior Wide Range of Flow Capacities The P60 is a

More information

FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System

FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System Product Focus F.A.S.T. System can be installed independent of the floor system. Stackable to create multiple tiers. No tools required

More information

KTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries

KTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and

More information

Specification Data CM /10. Putting You In Control Series V-Max. High Capacity V-Ported Control Ball Valve

Specification Data CM /10. Putting You In Control Series V-Max. High Capacity V-Ported Control Ball Valve Putting You In Control Specification Data CM36005 09/10 36005 Series V-Max High Capacity V-Ported Control Ball Valve Dresser Masoneilan 36005 Series V-Max High Capacity V-Ported Control Ball Valve 2 Dresser

More information

ACCESSORIES LS/520, LC/520 Heavy duty non-return valves 1/ LT1000 Block form flow regulators (uni-directional) 1/8 & 1/4

ACCESSORIES LS/520, LC/520 Heavy duty non-return valves 1/ LT1000 Block form flow regulators (uni-directional) 1/8 & 1/4 ESSORIES LT000 lock form flow regulators (uni-directional) /8 & /4 LT00 lock form flow regulators (bi-directional) /8 & /4 LT70 Quick exhaust valves /8 & /4 LS/50, L/50 Heavy duty non-return valves /4...

More information

Process Interface Valves

Process Interface Valves www.swagelok.com Process Interface s Kenmac Series Process Interface s and Process Monoflanges Stainless steel, carbon steel, and duplex stainless steel materials Pressure ratings in accordance with ASME

More information

1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)

1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME) Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National

More information

FINISH SPECIFICATIONS FOR PIERCE NUTS & PIERCE STUDS DETAILED FINISH DESCRIPTIONS AND REQUIREMENTS

FINISH SPECIFICATIONS FOR PIERCE NUTS & PIERCE STUDS DETAILED FINISH DESCRIPTIONS AND REQUIREMENTS FINISH SPECIFICATIONS FOR PIERCE NUTS & PIERCE STUDS DETAILED FINISH DESCRIPTIONS AND REQUIREMENTS S S300 S301 S302 S303 PLAIN- NO SUPPLEMENTARY FINISH REQUIRED OTHER THAN THE FINISH CONSIDERED THE NORMAL

More information

Air Delivery System. Single: Double: installation instructions

Air Delivery System. Single: Double: installation instructions installation instructions Single: 7001003 Double: 7001002 Air Delivery System The Molnar Hoists Air Delivery System has been designed as an integrated system specifically to supply compressed air to either

More information

P R O C E S S V A L V E S. ORBIT Technical Reference Data for Valves and Actuators ORBIT

P R O C E S S V A L V E S. ORBIT Technical Reference Data for Valves and Actuators ORBIT Technical Reference Data for Valves and Actuators TABLE OF CONTENTS TECHNICAL REFERENCE DATA FOR VALVES AND ACTUATORS Standard Features 2 Ordering Information 3 The Principal 4 One Piece Stem, Enclosed

More information

SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 120V Permanent Magnet Drill STARTING SERIAL NUMBER.

SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 120V Permanent Magnet Drill STARTING SERIAL NUMBER. 69(5x) CATALOG NO. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 120V Permanent Magnet Drill 2-20 STARTING SERIAL NUMBER G85A BULLETIN NO. 5-6-00 REVISED BULLETIN DATE Apr.

More information

A Resource for Semiconductor Manufacturers. Illustrated Parts Guide for Varian VIISion 80, 80+, & 200

A Resource for Semiconductor Manufacturers. Illustrated Parts Guide for Varian VIISion 80, 80+, & 200 Illustrated Parts Guide for Varian VIISion 0, 0+, & 00 00--99 sales@glemco.com www.glemco.com G-0-0AH Rev0 Components for Varian VIIsion Source 00--99 sales@glemco.com www.glemco.com G-0-0AH Rev0 Components

More information

3Pin and Socket Connectors

3Pin and Socket Connectors AMPLIMITE Connectors Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-208 Industrial versions available that use the same manufacturing process of MIL-C-

More information

Pre s sure Re gulators

Pre s sure Re gulators www.swagelok.com Pre s sure Re gulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators Swagelok Pressure Regulator Features Stem Fine-pitch

More information

DETAIL SPECIFICATION SHEET

DETAIL SPECIFICATION SHEET INCH-POUND MIL-DTL-55302/138C 10 September 2018 SUPERSEDING MIL-DTL-55302/138C 24 March 2004 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN, 160 CONTACT POSITIONS,

More information

RL Industrial Lobe Pumps RL Series. Performance. Nomenclature. Product Description. Section 270 Page Issue A

RL Industrial Lobe Pumps RL Series. Performance. Nomenclature. Product Description. Section 270 Page Issue A Section 270 Page 270.1 Issue A Performance Size Nominal Capacity Standard 2-Bushing Design Pressure High Pressure 4-Bushing Design GPM M 3 /hr PSI BAR PSI BAR RL016 105 23.8 250* 17 400* 27 RL025 160 36.3

More information

HLA/HLB Series. Specifications. Switch specifications and variations. Thin parallel hand (bush/bearing guide) Double acting

HLA/HLB Series. Specifications. Switch specifications and variations. Thin parallel hand (bush/bearing guide) Double acting FH G G S F J H2 LB2 N/ S/F Specifications Thin parallel hand (bush/bearing guide) Double acting Series Operational stroke length: HLA,, 25mm 13,, 23mm Descriptions HLA Size Cylinder bore size mm CS CS

More information

DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, NUT, HEXAGON, CONNECTOR MOUNTING, SERIES III AND IV, METRIC

DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, NUT, HEXAGON, CONNECTOR MOUNTING, SERIES III AND IV, METRIC METRIC MIL-DTL-38999/28H 27 February 2018 SUPERSEDING MIL-DTL-38999/28H 12 May 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, NUT, HEXAGON, CONNECTOR MOUNTING, SERIES III AND IV, METRIC

More information

Price/1. Price/1. Price/1. 1/ 8 3/ 8 1 1/ 2 1/ 8 10g -4580K / 4 3/ 4 2 1/ 2 1/ 4 30g -4660K / / 2 3/ 8 60g -4740K 291.

Price/1. Price/1. Price/1. 1/ 8 3/ 8 1 1/ 2 1/ 8 10g -4580K / 4 3/ 4 2 1/ 2 1/ 4 30g -4660K / / 2 3/ 8 60g -4740K 291. 2 Flute For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards.

More information

FLOW DATA VALVE SEAT RATINGS

FLOW DATA VALVE SEAT RATINGS TYPE 530SB, 730SB, & 9300B DIGESTER BLOW VALVES These valves are specifically designed for digester blow service, providing the inherent advantages of ball valves for this critical pulp-mill application.

More information

SP Standard Profile. Flanged to Duct Install Type THERMAL BREAKS OPPOSED ACTION PARALLEL ACTION. T.A. Morrison & Co. Inc.

SP Standard Profile. Flanged to Duct Install Type THERMAL BREAKS OPPOSED ACTION PARALLEL ACTION.  T.A. Morrison & Co. Inc. 1 SUBMITTAL DATA Series 9000 BF Thermally Insulated Damper with Thermally Broken Frames & Blades SP Standard Profile Flanged to Duct Install Type THERMAL BREAKS OPPOSED frame is 4 (101.6 mm) deep x 1 (25.4

More information

SECTION DUALGARD SNOW GUARDS

SECTION DUALGARD SNOW GUARDS Copyright 2016 Metal Roof Innovations, Ltd. www.s-5.com SECTION 07 72 53 DUALGARD SNOW GUARDS This section has been prepared by Metal Roof Innovations, Ltd. for use in the preparation of a project specification.

More information

EU1000 CRIMPER OPERATORS MANUAL WITH ACTTM CONTROLLER

EU1000 CRIMPER OPERATORS MANUAL WITH ACTTM CONTROLLER EU1000 CRIMPER OPERATORS MANUAL WITH ACTTM CONTROLLER SAFETY PRECAUTIONS READ INSTRUCTIONS AND IDENTIFY ALL COMPONENT PARTS BEFORE USING CRIMPER KEEP HANDS AWAY FROM PINCH POINTS CONSULT HOSE AND FITTING

More information

Model B. Thermostatic Control Valves. Typical applications

Model B. Thermostatic Control Valves. Typical applications Thermostatic Control Valves Model B Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications

More information

2013 by KVT-KOENIG GROUP >

2013 by KVT-KOENIG GROUP > CATALOG 2014 2013 by KVT-KOENIG GROUP > www.kvt-koenig.com KVT - KOENIG GROUP SFC KOENIG is an internationally wellknown specialist for high-quality sealing and flow control applications. In all areas,

More information

E Spray Drying. industries and NEW markets. challenges. Meeting the. of new WELCOME TO DELAVAN

E Spray Drying. industries and NEW markets. challenges. Meeting the. of new WELCOME TO DELAVAN E Spray Drying Meeting the challenges of new WELCOME TO DELAVAN industries and NEW markets SECTION INDEX Special purpose nozzles for use in the Spray Drying industry covering a wide variety of products.

More information

Signal Framework. Side Pole Post Top Overhead Mast Arm Pedestrian Pipe Fittings Pole Hardware Special / Custom. Signals. Overview.

Signal Framework. Side Pole Post Top Overhead Mast Arm Pedestrian Pipe Fittings Pole Hardware Special / Custom. Signals. Overview. Signal Framework Side Pole Post Top Overhead Mast Arm Pedestrian Pipe Fittings Pole Hardware Special / Custom Cabinets Controllers Signals Signs Software Specialty Overview McCain s Signal Framework collection

More information

Precision Lead Screws

Precision Lead Screws Precision Lead Screws ov-precision_lead_screws_divider - Updated - 18-09-2017 163 Precision Lead Screws Technical Information Precision lead screws ov-precision_lead_screws_technical_info - Updated - 18-09-2017

More information

RESCUE STRUT 12 SHORE TRENCH KIT

RESCUE STRUT 12 SHORE TRENCH KIT RESCUE STRUT 12 SHORE TRENCH KIT Part Number 22-796860 RESCUE STRUT 12 SHORE TRENCH KIT Qty. Part Description 4 22-796200... 24.8-35.4 in (63.5-91.4 cm) 8 22-796202... 36.6-58.3 in (94.0-148.6 cm) 2 22-796012...Strut

More information

BOSHART INDUSTRIES Telephone: Toll Free: Fax:

BOSHART INDUSTRIES Telephone: Toll Free: Fax: 0- Available in cast bronze or cast brass body and poppet NBR "O"-Ring Seal (Nitrile Buna-N) BRONZE OR BRASS CHECK VALVE BRONZE 7CV050 7CV075 7CV00 7CV25 7CV50 7CV200 7CV300 7CV400 9.34 2.88 8.26 28.62

More information

Installation Manual. Retractable Ceiling Column Models 8301 & 8301PC

Installation Manual. Retractable Ceiling Column Models 8301 & 8301PC Retractable ceiling column Installation Manual Retractable Ceiling Column Models 8301 & 8301PC Overview The Retractable Ceiling Column is a convenient and cost-effective way of supplying medical gas and

More information

VK 3. Control Equipment Control Equipment

VK 3. Control Equipment Control Equipment 2 3 Control Equipment Control Equipment SC7 SC7 5 SC7 M5.8 Effective Metered flow.5 sectional area mm 2 Free flow. Flow rate Metered flow 75 /min(anr) Free flow 7 Workin fluid Recommended tube SC7 M5.8

More information