Chapter 11. In-Time and Lean Production
|
|
- Elisabeth Parrish
- 6 years ago
- Views:
Transcription
1 Chapter 11 Just-In In-Time and Lean Production
2 What is JIT? Producing only what is needed, when it is needed A philosophy An integrated management system JIT s mandate: Eliminate all waste
3 Basic Elements of JIT 1. Flexible resources 2. Cellular layouts 3. Pull production system 4. Kanban production control 5. Small-lot lot production 6. Quick setups 7. Uniform production levels 8. Quality at the source 9. Total productive maintenance 10. Supplier networks
4 Waste in Operations Figure 11.1
5 Waste in Operations Figure 11.1
6 Waste in Operations Figure 11.1
7 Flexible Resources Multifunctional workers General purpose machines Study operators & improve operations
8 Standard Operating Routine for a Worker Standard Operating Routine Sheet 1 Worker: Cycle Time: Russell 2 min Order of Operations time Operations :10 :20 :30 :40 :50 1:00 1:10 1:20 1:30 1:40 1:50 2:00 Pick up material Unload/ load machine 1 Unload/ load machine 2 Unload/ load machine 3 Inspect/ pack Figure 11.2
9 Cellular Layouts Group dissimilar machines in manufacturing cell to produce family of parts Work flows in one direction through cell Cycle time adjusted by changing worker paths
10 Manufacturing Cell with Worker Routes Cell 1 Worker 1 Worker 2 Worker 3 Figure 11.3
11 Worker Routes Lengthened as Volume Decreases Cell 1 Cell 2 Worker 1 Worker 2 Worker 3 Figure 11.4 Cell 3 Cell 4 Cell 5
12 The Pull System Material is pulled through the system when needed Reversal of traditional push system where material is pushed according to a schedule Forces cooperation Prevent over and underproduction
13 Kanban Production Control System Kanban card indicates standard quantity of production Derived from two-bin inventory system Kanban maintains discipline of pull production Production kanban authorizes production Withdrawal kanban authorizes movement of goods
14 A Sample Kanban
15 The Origin of Kanban a) Two-bin inventory system b) Kanban inventory system Bin 1 Kanban Bin 2 Reorder card Q - R R R Q = order quantity R = reorder point - demand during lead time Figure 11.5
16 Types of Kanbans Figure 11.6
17 Types of Kanbans Figure 11.6
18 Types of Kanbans Figure 11.6
19 Types of Kanbans Kanban Square Marked area designed to hold items Signal Kanban Triangular kanban used to signal production at the previous workstation Material Kanban Used to order material in advance of a process Supplier Kanbans Rotate between the factory and suppliers
20 Determining Number of Kanbans No. of Kanbans = average demand during lead time + safety stock container size where N = dl + S C N = number of kanbans or containers d = average demand over some time period L = lead time to replenish an order S = safety stock C = container size
21 Determining the Number of Kanbans d = 150 bottles per hour L = 30 minutes = 0.5 hours S = 0.10(150 x 0.5) = 7.5 C = 25 bottles dl + S (150 x 0.5) N = = C = = 3.3 kanbans or containers 25 Example 11.1 Round up to 4 (to allow some slack) or down to 3 (to force improvement)
22 Small-Lot Production Requires less space & capital investment Moves processes closer together Makes quality problems easier to detect Makes processes more dependent on each other
23 Inventory Hides Problems
24 Lower Levels of Inventory Expose Problems
25 Components of Lead Time Processing time Reduce number of items or improve efficiency Move time Reduce distances, simplify movements, standardize routings Waiting time Better scheduling, sufficient capacity Setup time Generally the biggest bottleneck
26 SMED Principles 1. Separate internal setup from external setup 2. Convert internal setup to external setup 3. Streamline all aspects of setup 4. Perform setup activities in parallel or eliminate them entirely
27 Uniform Production Results from smoothing production requirements Kanban systems can handle +/- 10% demand changes Smooths demand across planning horizon Mixed-model assembly steadies component production
28 Mixed-Model Model Sequencing Example 11.2
29 Quality at the Source Jidoka is authority to stop production line Andon lights signal quality problems Undercapacity scheduling allows for planning, problem solving & maintenance Visual control makes problems visible Poka-yoke prevents defects
30 Kaizen Continuous improvement Requires total employment involvement Essence of JIT is willingness of workers to Spot quality problems Halt production when necessary Generate ideas for improvement Analyze problems Perform different functions
31 Total Productive Maintenance (TPM) Breakdown maintenance Repairs to make failed machine operational Preventive maintenance System of periodic inspection & maintenance to keep machines operating TPM combines preventive maintenance & total quality concepts
32 TPM Requires Management to: Design products that can be easily produced on existing machines Design machines for easier operation, changeover, maintenance Train & retrain workers to operate machines Purchase machines that maximize productive potential Design preventive maintenance plan spanning life of machine
33 Supplier Policies 1. Locate near to the customer 2. Use small, side loaded trucks and ship mixed loads 3. Consider establishing small warehouses near to the customer or consolidating warehouses with other suppliers 4. Use standardized containers and make deliveries according to a precise delivery schedule 5. Become a certified supplier and accept payment at regular intervals rather than upon delivery
34 Benefits of JIT 1. Reduced inventory 8. Better relations with suppliers 2. Improved quality 9. Simplified 3. Lower costs scheduling and 4. Reduced space control activities requirements 10. Increased capacity 5. Shorter lead time 11. Better use of 6. Increased productivity human resources 12. More product 7. Greater flexibility variety
35 JIT Implementation Use JIT to finely tune an operating system Somewhat different in USA than Japan JIT is still evolving JIT isn t for everyone
36 JIT In Services Competition on speed & quality Multifunctional department store workers Work cells at fast-food food restaurants Just-in in-time publishing for textbooks Construction firms receiving material just as needed
Operations Management - 5 th Edition
Chapter 15 Lean Production Operations Management - 5 th Edition Roberta Russell & Bernard W. Taylor, III Copyright 2006 John Wiley & Sons, Inc. Beni Asllani University of Tennessee at Chattanooga Lecture
More informationDennis Bricker Dept of Mechanical & Industrial Engineering The University of Iowa. JIT --Intro 02/11/03 page 1 of 28
Dennis Bricker Dept of Mechanical & Industrial Engineering The University of Iowa JIT --Intro 02/11/03 page 1 of 28 Pull/Push Systems Pull system: System for moving work where a workstation pulls output
More informationJust-In-Time (JIT) Manufacturing. Overview
Just-In-Time (JIT) Manufacturing Overview The Just-in-Time (JIT) Manufacturing Philosophy Prerequisites for JIT Manufacturing Elements of JIT Manufacturing Benefits of JIT Manufacturing Success and JIT
More informationOM (Fall 2016) Outline
Lean Operations Outline Global Company Profile: Toyota Motor Corporation Lean Operations Lean and Just-in-Time Lean and the Toyota Production System Lean Organizations Lean in Services 2 Toyota Motor Corporation
More informationCh 26 Just-In-Time and Lean Production. What is Lean Production? Structure of Lean Production System. Activities in Manufacturing.
Ch 26 Just-In-Time and Lean Production Sections: 1. Lean Production and Waste in Manufacturing 2. Just-in-time Production Systems 3. Autonomation 4. Worker Involvement What is Lean Production? Lean production
More informationHistorical Phases of Production
Lean 101 Overview Lean Background Taiichi Ohno and Shigeo Shingo developed Lean Manufacturing at Toyota over a period of 20-30 years. Their intention was not to develop some sort of unified field theory
More informationChapter 13. Lean and Sustainable Supply Chains
1 Chapter 13 Lean and Sustainable Supply Chains 2 OBJECTIVES Lean Production Defined The Toyota Production System Lean Implementation Requirements Lean Services Lean Production 3 Lean Production can be
More informationOutline. Push-Pull Systems Global Company Profile: Toyota Motor Corporation Just-in-Time, the Toyota Production System, and Lean Operations
JIT and Lean Operations Outline Push-Pull Systems Global Company Profile: Toyota Motor Corporation Just-in-Time, the Toyota Production System, and Lean Operations Eliminate Waste Remove Variability Improve
More informationLEAN MANUFACTUING-CONCEPT, LIMITATION, APPLICATIONS: AN OVERVIEW
LEAN MANUFACTUING-CONCEPT, LIMITATION, APPLICATIONS: AN OVERVIEW Submitted By Ms. PUNAM NIVRUTTI PATIL DPGD/OC13/1243 SPECIALIZATION: OPERATIONS WELINGKAR INSTITUTE OF MANAGEMENT DEVELOPMENT & RESEACH
More informationOutline. Pull Manufacturing. Push Vs. Pull Scheduling. Inventory Hides Problems. Lowering Inventory Reveals Problems
Outline Pull Manufacturing Why Pull Manufacturing? The Problem of Inventory Just In Time Kanban One Piece Flow Demand / Pull Standard Work & Takt Time Production Smoothing 1 2 Why Pull Manufacturing? Push
More informationJIT AND Lean Operations 14-1
Chapter 15 JIT AND Lean Operations 14-1 Product Structure Tree = Shop floor layouts A B(4) C(2) D(2) E(1) D(3) F(2) MRP vs. JIT 14-2 JIT/Lean Production Just-in-time: Repetitive production system in which
More informationJust In Time (JIT) Quality and Reliability Engg. (171906) H I T. Hit suyo na mono O Iru toki iru dake Tasukuran
Just In Time (JIT) H I T Hit suyo na mono O Iru toki iru dake Tasukuran (What is needed) (When it is needed and in what quantity) (Make) The crux is, if you cannot use it now do not make it now. Quality
More informationValue Stream Analysis and other
Value Stream Analysis and other methods within Lean Production The term lean comes from using less of everything compared to mass production. This means using less human effort in the factory with less
More informationLearning Objectives. 1. Explain how lean systems improve internal and supply chain operations
CHAPTER EIGHT Lean Systems McGraw-Hill/Irwin Copyright 2011 by the McGraw-Hill Companies, Inc. All rights reserved. Learning Objectives 1. Explain how lean systems improve internal and supply chain operations
More informationFive Tips to Achieve a Lean Manufacturing Business
Five Tips to Achieve a Lean Manufacturing Business Executive Overview Introduction The more successful manufacturers today are those with the ability to meet customer delivery schedules while maintaining
More informationJIT and Lean Operations. JIT/Lean Operations
5/7/2011 16 JIT and Lean Operations By : Sa Ed M. Salhieh, Salhieh, Ph.D. 16-1 JIT/Lean Operations Good production systems require that managers address three issues that are pervasive and fundamental
More informationLean Operations. PowerPoint slides by Jeff Heyl. Copyright 2017 Pearson Education, Inc.
Lean Operations 16 PowerPoint presentation to accompany Heizer, Render, Munson Operations Management, Twelfth Edition Principles of Operations Management, Tenth Edition PowerPoint slides by Jeff Heyl 16-1
More informationJUST IN TIME. Manuel Rincón, M.Sc. October 22nd, 2004
JUST IN TIME Manuel Rincón, M.Sc. October 22nd, 2004 Lecture Outline 1. Just-in-Time Philosophy 2. Suppliers Goals of JIT Partnerships Concerns of Suppliers 3. JIT Layout Distance Reduction Increased Flexibility
More informationJust-in-Time System. Dr S G Deshmukh
Just-in-Time System Dr S G Deshmukh Difficulty in Production! Demand is uncertain and variable. Same equipment and people are used to make a variety of products. Switching products takes time.(imagaine
More informationFinished goods available to meet Takt time when variations in customer demand exist.
Delaware Valley Industrial Resource Center 2905 Southampton Road Philadelphia, PA 19154 Tel: (215) 464-8550 Fax: (215) 464-8570 www.dvirc.org Term Batch-and-Queue Processing Buffer Stock Catchball Cell
More informationCHAPTER 1 INTRODUCTION
1 CHAPTER 1 INTRODUCTION Nowadays, manufacturing firms are in the position to redefine and redesign their manufacturing systems in order to meet the competitive demands raised by market challenges. The
More informationLean and Agile Systems. Rajiv Gupta FORE School of Management October 2013 Session 6
Lean and Agile Systems Rajiv Gupta FORE School of Management October 2013 Session 6 Module 1 Recap of Session 5 Module 2 Pull Production Rules of Kanban Module 3 Small Batch Production Level Production
More informationChapter 3 JUST IN TIME SYSTEM
Chapter 3 JUST IN TIME SYSTEM 3.1 INTRODUCTION JIT may be described as an extension of the original concept of managing the material flow in a factory to reduce the inventory levels. In fact, there is
More informationSCM 302 OPERATIONS MANAGEMENT JIT
SCM 302 OPERATIONS MANAGEMENT JIT 2 Agenda for this Module 1. Define just-in-time, TPS, and lean operations 2. Define the seven wastes and the 5Ss 3. Explain JIT partnerships 4. Determine optimal setup
More informationOperations Management
Operations Management Chapter 16 JIT and Lean Operations PowerPoint presentation to accompany Heizer/Render Operations Management, 11ed Some additions and deletions have been made by Ömer Yağız to this
More informationFlow and Pull Systems
Online Student Guide Flow and Pull Systems OpusWorks 2016, All Rights Reserved 1 Table of Contents LEARNING OBJECTIVES... 4 INTRODUCTION... 4 BENEFITS OF FLOW AND PULL... 5 CLEARING ROADBLOCKS... 5 APPROACH
More informationPLUS VALUE STREAM MAPPING
LEAN PRINCIPLES PLUS VALUE STREAM MAPPING Lean Principles for the Job Shop (v. Aug 06) 1 Lean Principles for the Job Shop (v. Aug 06) 2 Lean Principles for the Job Shop (v. Aug 06) 3 Lean Principles for
More informationINTRODUCTION 1. When manufacturing processes of products being examine through customer s perspective, we will be able to identify 2 types of processe
INTRODUCTION 1. When manufacturing processes of products being examine through customer s perspective, we will be able to identify 2 types of processes, the Value-Added and Non-Value Added. 2. The later
More informationINTRODUCTION 1. When manufacturing processes of products being examine through customer s perspective, we will be able to identify 2 types of processe
INTRODUCTION 1. When manufacturing processes of products being examine through customer s perspective, we will be able to identify 2 types of processes, the Value-Added and Non-Value Added. 2. The later
More informationIT 470a Six Sigma Chapter X
Chapter X Lean Enterprise IT 470a Six Sigma Chapter X Definitions Raw Materials component items purchased and received from suppliers WIP work in process, items that are in production on the factory floor
More informationSALES PROSPECTING KIT
Distributed by: SALES PROSPECTING KIT LEAN MANUFACTURING LAST UPDATED 4/2009 What is Lean Manufacturing? Lean manufacturing is an improvement methodology designed to eliminate waste and improve operational
More informationThe basic concept of waste
The basic concept of waste Waste Value-adding Customer demand Value stream = all processes and work steps between withdrawal of raw material and delivery of finished good Customer satisfaction The customer
More informationAPPLICATION OF LEAN METHODS FOR IMPROVEMENT OF MANUFACTURING PROCESSES
APPLICATION OF LEAN METHODS FOR IMPROVEMENT OF MANUFACTURING PROCESSES György KOVÁCS 1,a ABSTRACT: Changing market environment, increasing global competition and fluctuating customer demands require efficient
More informationGeneric Case Study. Initial Condition. 1. Stability
Generic Case Study This example is based on an actual project. Names of people and details about processes have been hidden. To achieve the current state it took 25 months, 1 fulltime kaizen leader, dedicated
More informationLEAN PRODUCTION SYSTEM
LEAN PRODUCTION SYSTEM Introduction Lean Overview Process Control Tools 1. Flow Chart / Diagram 2. Check Sheet 3. Histogram 4. Pareto Chart / Diagram 5. Cause-and-Effect Diagram 6. Why-Why Diagram 7. Scatter
More informationCHAPTER 1 INTRODUCTION
1 CHAPTER 1 INTRODUCTION 1.1 MANUFACTURING SYSTEM Manufacturing, a branch of industry, is the application of tools and processes for the transformation of raw materials into finished products. The manufacturing
More informationInternational Lean Manufacturing Lessons National Localization Indaba Balázs Németh, Phd. Kvalikon Consulting
International Lean Manufacturing Lessons National Localization Indaba Balázs Németh, Phd. Kvalikon Consulting DAC Annual Grand Meeting 5 June 2014 Competition 2 Competing for Resources (Capital, Raw Material,
More informationVisual Controls : Applying Visual Management to the Factory
Visual Controls : Applying Visual Management to the Factory Table Of Contents: Introduction xi Acknowledgments xix Chapter 1 Importance of the Visual Factory 1 (16) The Common Ground of Production 1 (6)
More informationLecture 9 MBF2213 Operations Management Prepared by Dr Khairul Anuar. L9: Lean synchronization
Lecture 9 MBF2213 Operations Management Prepared by Dr Khairul Anuar L9: Lean synchronization 1 Lean operations Operations strategy Design Improvement Lean operations Planning and control The market requires
More informationThe Quality Group. All Rights Reserved
Online Student Guide The Quality Group. All Rights Reserved 1 Table of Contents LEARNING OBJECTIVES... 4 INTRODUCTION... 4 LEAN VALUE STREAM... 4 CALCULATING TAKT TIME... 5 TAKT TIME OVERVIEW... 5 TAKT
More informationLean Checklist Self-Assessment
Lean Checklist Self-Assessment Marino Associates, LLC 110 Greenwoods Lane East Windsor, CT 06088 Tel: 860 623-2521 Fax: 860 623-0819 E-mail: Danam333@aol.com www.dmarinoassociates.com Copyright Marino
More informationProcess Mapping What It Means for You. FAQs. Desired Results. 5) What are Fastenal s objectives? 1) What is a process mapping?
Process Mapping What It Means for You At Fastenal, we do much more than just ship products out of a catalog; we can work closely with you to uncover hidden sources of supply chain waste and provide total
More informationLean Six Sigma Black Belt Week 3
Lean Six Sigma Black Belt Week 3 Chapter 3-1: Lean Re-Entry and Process Institute of Industrial Engineers 3577 Parkway Place Suite 200 Norcross, GA 30092 Lean Six Sigma Black Belt Week 3 Agenda Day 1 Day
More informationA PM on Lean Production Randel Ltd.
A PM on Lean Production Randel Ltd. RANDEL LTD. INDUSTRY STREET 8 38267 WOMANCHESTER ENGLAND Written by: Tobias Reith, BSc Course: Lean Production (2016) Linköping University, Sweden A PM ON LEAN PRODUCTION
More informationLEAN MANUFACTURING & TPM.
LEAN MANUFACTURING & TPM www.fourprinciples.com BACKGROUND The core area of any manufacturing facility is the shop floor. Manufacturing is most often also the largest function within an organisation. In
More informationLean Gold Certification Blueprint
The Lean Certification Blueprint provides additional useful information beyond the Body of Knowledge. The Body of Knowledge specifies the competencies, topics, and subtopics required by different types
More information"Value Stream Mapping How does Reliability play a role in making Lean Manufacturing a Success " Presented by Larry Akre May 17, 2007
"Value Stream Mapping How does Reliability play a role in making Lean Manufacturing a Success " Presented by Larry Akre May 17, 2007 LAKRE 2007 1 Lean Manufacturing What is Lean Manufacturing? A philosophy
More informationLean Flow Enterprise Elements
"Lean Flow" describes the performance of organizations that are effective enough to win consistently in the competitive global marketplace. To understand how to get there, it s useful to focus on Lean
More informationLEAN CERTIFICATION BODY OF KNOWLEDGE RUBRIC VERSION 3.0
MODULE 1 LEAN CERTIFICATION BODY OF KNOWLEDGE RUBRIC VERSION 3.0 1. Cultural Enablers 15% 20% 25% 1.1. Principles of Cultural Enablers 3% 4% 5% 1.1.1. Respect for the individual 1.1.2. Humility 1.2. Processes
More information4/23/18. LEAN Introduction, Implementation and Hurdles. What is Lean? Phani Nagaraj Dynatect Ro-Lab Inc. PMA Customer Expectation
Global Leaders in Dynamic Protection for Equipment and People LEAN Introduction, Implementation and Hurdles Phani Nagaraj Dynatect Ro-Lab Inc. PMA 018 What is Lean? Customer Expectation Share/Stake holder
More informationEXCELLENCE SYSTEMS GROUP. Consultants. Lean Frontier. Freddy Ballé. EXCELLENCE SYSTEMS GROUP Consultants
Lean Frontier Freddy Ballé 1 MY START WITH LEAN 1975: Dumping in Africa? Toyota visits Not cultural, but logical and rational 2 WHAT I LEARNED WITH LEAN Once you change your paradigm, you learn to see:
More informationSharing Your Lean System For Total Success
Sharing Your Lean System For Total Success How to use your lean system to all stakeholders benefit Presented by Russ Scaffede Chairman, Board of Advisors OPS, Inc. Former VP at Toyota Motor Manufacturing
More informationACTIVITY 8: QUESTION. Identify some ways in which businesses can lose stock. ACTIVITY 8: ANSWER
The weekly schedule will be adjusted for stock in plant. There are various models for calculating the reorder quantity for stock which takes into account various practical issues. For example, a manufacturer
More informationThe entire presentation kit is having 2 main directories as below. Just in Time. 01 Introduction
M118 DEMO OF JIT- JUST IN TIME DEMO OF TRAINING PRESENTATION KIT Price 160 USD Buy: http://www.globalmanagergroup.com/just-in-timetraining-presentation.htm Chapter-1.0 CONTENTS OF JIT JUST IN TIME TRAINING
More informationWorld Class Manufacturing SMED. Single-Minute Exchange of Die
World Class Manufacturing Single-Minute Exchange of Die After completing this chapter you will understand Meaning and Basic of. History of Purpose of. Basic steps Implementation. Process of Benefits of
More informationLean Operations. Copyright 2012 by The McGraw-Hill Companies, Inc. All rights reserved.
Lean Operations McGraw-Hill/Irwin Copyright 2012 by The McGraw-Hill Companies, Inc. All rights reserved. You should be able to: 1. Explain what is meant by the term lean operations system 2. List each
More informationLEAN WAREHOUSE OPERATIONS.
LEAN WAREHOUSE OPERATIONS www.fourprinciples.com BACKGROUND Warehousing s historical core responsibility has been the storage of goods. However, the scope and core responsibilities of warehouse management
More informationLean Basics Overview. EMC 2011 Training. NCDENR April Copyright 2010 EMC Corporation. All rights reserved.
Lean Basics Overview EMC 2011 Training NCDENR April 2011 1 Topics Lean Six Sigma defined Why Lean Six Sigma? What s a process? Interrogating the process by identifying Value & Waste Brief overview of some
More informationCHAPTER 3 FLOW, SPACE, AND ACTIVITY RELATIONSHIPS. In determining the requirement of a facility, three important consideration are: Flow
1 CHAPTER 3 FLOW, SPACE, AND ACTIVITY RELATIONSHIPS Asst.Prof.Dr.BusabaPhruksaphanrat IE333 Industrial Plant Design Introduction 2 In determining the requirement of a facility, three important consideration
More informationSupply Chain Management. Dr Mariusz Maciejczak
Supply Chain Management Just-in in-time and other SCM systemss Dr Mariusz Maciejczak Topics to be Covered Review of JIT & Waste Objectives of JIT JIT Principles JIT and Variance JIT Tools and Procedures
More informationPlanning. Dr. Richard Jerz rjerz.com
Planning Dr. Richard Jerz 1 Planning Horizon Aggregate planning: Intermediate range capacity planning, usually covering 2 to 12 months. Long range Short range Intermediate range Now 2 months 1 Year 2 Stages
More informationPlanning. Planning Horizon. Stages of Planning. Dr. Richard Jerz
Planning Dr. Richard Jerz 1 Planning Horizon Aggregate planning: Intermediate range capacity planning, usually covering 2 to 12 months. Long range Short range Intermediate range Now 2 months 1 Year 2 Stages
More informationIMPROVING EFFICIENCY IN GARMENT INDUSTRY BY IMPLEMENTING SINGLE PIECE LINE PRODUCTION SYSTEM M Parthiban *1 & Adarsh H 2
IMPROVING EFFICIENCY IN GARMENT INDUSTRY BY IMPLEMENTING SINGLE PIECE LINE PRODUCTION SYSTEM M Parthiban *1 & Adarsh H 2 *1 Assistant Professor, Department of Mechanical Engineering, PSG College of Technology
More informationCHAPTER 3.0 JUST-IN-TIME (JIT) MANUFACTURING SYSTEMS
CHAPTER 3.0 JUST-IN-TIME (JIT) MANUFACTURING SYSTEMS 3.1 Abstract The Just-In-Time technique based manufacturing system, developed and implemented in the Toyota Motor Company may be defined as manufacturing
More informationLean Distribution. Mark Kushner, COO Lloyed Lobo, Director Business Development
Lean Distribution Mark Kushner, COO Lloyed Lobo, Director Business Development Agenda Brief Company Overview What is Lean? Lean in the Extended Supply Chain Benefits of Lean Distribution Can Lean Help
More informationThis appendix includes the title and reference number for every best
Inventory Best Practices, Second Edition By Steven M. Bragg Copyright 2011 by John Wiley & Sons, Inc. APPENDIX Summary of Inventory Best Practices This appendix includes the title and reference number
More informationLean Principles. Jerry D. Kilpatrick. This article was originally written for and published by MEP Utah in 2003 (
Lean Principles By Jerry D. Kilpatrick This article was originally written for and published by MEP Utah in 2003 (www.mep.org) Page 1 of 6 Introduction Lean operating principles began in manufacturing
More informationCreating a Lean Fulfillment Stream to Meet Growing Demand
Creating a Lean Fulfillment Stream to Meet Growing Demand Stephane Langevin / Adam Melrose Sr. Logistics Manager / Director, Warehouse Ops Bosch Automotive Steering / LeanCor Logistics Robert Bosch Automotive
More informationFALL MGMT 405/ FINAL EXAM/REVISION
Business Department FALL 2017-18 MGMT 405/ FINAL EXAM/REVISION MGMT 405, Production Man. Section A/Multiple Choice-30% Revision 1) Which of the following part does not indicate the concept of project?
More informationImplementing VMI to Reduce Direct and Indirect Cost
Implementing VMI to Reduce Direct and Indirect Cost James M. Truog, Manager Strategic Purchasing Wacker Corp. 262-250-3518; james.truog@am.wackergroup.com 89 th Annual International Supply Management Conference,
More informationMAS BEST PRACTICE SKILLS EVENT LEAN AWARENESS WORKSHOP
MAS BEST PRACTICE SKILLS EVENT LEAN AWARENESS WORKSHOP RICK SHOULER Rick.shouler@mymas.org COURSE CONTENT Introduction The Need for Change Introduction to Lean and Continuous Improvement Waste Visual Management
More informationOne-off Batch High volume production (mass production) One-off: Custom - built kitchen Batch: Olympic medals High volume: Garden table / chairs
The selection of materials and components is determined by the manufacturing processes involved and the scale of production. However, in an attempt to reduce manufacturing costs and overall costs, products
More informationLevel & Stable Operations
Getting Started with Lean Manufacturing Principles in Flexible Substrate Coating and Converting Dave Schoellerman Tollcoating.com by Carestream Health, Incorporated info@tollcoating.com Abstract Lean manufacturing
More informationEnabling Lean Manufacturing through ERP
Enabling Lean Manufacturing through ERP T.G.Dhandapani Group CIO Sundaram-Clayton Limited 1 Agenda Introduction Digitizing Lean in ERP Ecosystem Problem and baseline metrics Digitized Pull system Digitized
More informationlean value assessment Creating Higher Profi ts by Reducing Waste
lean value assessment Creating Higher Profi ts by Reducing Waste Lean Value Stream Assessment Tool A diagnostic tool developed from industry standards to compare ISI clients against World Class metrics
More informationTransforming Your Value Streams Workbook
Transforming Your Value Streams Workbook Before kanban can work we must level production. In this module you will earn what heijunka is. A workbook intended to accompany the Facilitator s Guides for this
More informationSUPPLIER QUALITY ASSURANCE IN SUPPLY CHAIN MANAGEMENT (SCM) THROUGH QUALITY TOOLS AND TECHNIQUES
SUPPLIER QUALITY ASSURANCE IN SUPPLY CHAIN MANAGEMENT (SCM) THROUGH QUALITY TOOLS AND TECHNIQUES P.P. Shah 1, R.L. Shrivastava 2 1 Acharya Shrimannarayan Polytechnic, Wardha(M.S.), India 2 Yeshwantrao
More informationManufacturing Material Flow Transformation
Manufacturing Material Flow Transformation By Alicia Carlson 15 SW. Washington St. Peoria, IL 6160 www.cgnglobal.com Manufacturing Material Flow Transformation Table of Contents Facility Layout & Material
More informationKanban Applied to Reduce WIP in Chipper Assembly for Lawn Mower Industries
Kanban Applied to Reduce WIP in Chipper Assembly for Lawn Mower Industries Author Rahman, A., Chattopadhyay, G., Wah, Simon Published 2006 Conference Title Condition Monitoring and Diagnostic Engineering
More informationProfit = Price - Cost. TAKT Time Map Capacity Tables. Total Productive Maintenance. Visual Control. Poka-yoke (mistake proofing) Kanban.
GPS Mod 1 Introduction MUDA MUDA Cost Reduction By Eliminating Waste Just-in-Time Profit = Price - Cost GPS Depth Study NVA/VA- Functions/Mgrs Quality Cost Delivery Safety Measures Morale TAKT Time Map
More informationBeyond Lean Manufacturing
PRODUCT CONFIGURATION MANAGEMENT Beyond Lean Manufacturing www.infor.com/solutions/pcm 1 Agenda State of discrete manufacturing productivity Strategies for competitive advantage Suggestions for getting
More informationCHAPTER 4 INTEGRATING LEAN TOOLS AND TECHNIQUES IN PLANT MAINTENANCE FUNCTION
CHAPTER 4 INTEGRATING LEAN TOOLS AND TECHNIQUES IN PLANT MAINTENANCE FUNCTION Chapter Summary The Integrating Lean tools and techniques in Plant Maintenance function explains the identification of lean
More information1. Does lean operation rely on implicit or explicit production planning? 2. Is a lean operation considered a push or a pull system?
1. Does lean operation rely on implicit or explicit production planning? 2. Is a lean operation considered a push or a pull system? 3. Does lean operation rely more on precise calculations or reaction
More informationLEAN PRODUCTION FACILITY LAYOUT.
LEAN PRODUCTION FACILITY LAYOUT www.fourprinciples.com BACKGROUND The production facility layout is as important as the technology it houses and has a significant impact on business performance. The layout
More informationP7 FLEXIBILITY INTRODUCTION
P7 FLEXIBILITY INTRODUCTION Flexible Manufacturing is a systematic establishment where the operation will be able to react positively in the case of changes, whether predicted or unpredicted. P7 FLEXIBILITY
More informationPRINCIPLES OF LEAN MANUFACTURING. Purdue Manufacturing Extension Partnership (800)
PRINCIPLES OF LEAN MANUFACTURING Purdue Manufacturing Extension Partnership (800) 877-5182 www.mep.purdue.edu What Is Lean? 2 Defining Lean Manufacturing Lean manufacturing is a systematic approach to
More informationThe Toyota Way. Using Operational Excellence as a Strategic Weapon. Chapter 1 9/11/ Ps. September 11, 2014
The Toyota Way September 11, 2014 1 Using Operational Excellence as a Strategic Weapon Chapter 1 2 Philosophy Long-term thinking Process Eliminate waste People and Partners Respect Challenge Grow them
More informationProfit = Price - Cost. TAKT Time Map Capacity Tables. Total Productive Maintenance. Visual Control. Poka-yoke (mistake proofing) Kanban.
GPS MUDA MUDA Cost Reduction By Eliminating Waste Just-in-Time Profit = Price - Cost GPS Depth Study NVA/VA- Functions/Mgrs Quality Cost Delivery Safety Measures Morale TAKT Time Map Capacity Tables Autonomous
More informationManaging for Daily Improvement
Managing for Daily Improvement Standard Work and Tools For Management to Drive Continuous Improvement Front Line Leadership Development System Module Part 1 of 12 MDI Workshop Agenda 2 Day Monday Tuesday
More informationBusiness Improvement Lean Manufacturing Toolkit
Business Improvement Lean Manufacturing Toolkit Lean Introduction. Lean is an influential and established set of principles and methods which can be used in any environment and setting. Lean is essentially
More informationPull and push strategies
Pull and push strategies In a manufacturing or retail business, what are the advantages and disadvantages of: simply satisfying current demand planning to meet (possible) future demand? 1. Match the words
More informationGETTING LEAN WITH GLOVIA CONSULTING
GETTING LEAN WITH GLOVIA CONSULTING Relentless pressure for quality, cost and time-based improvements are leading manufacturers to embrace next generation Lean solutions. Lean principles make sense to
More informationReview on Elements for Just in Time Implementation in Indian Service Sector
International Journal of Theoretical and Applied Mechanics. ISSN 0973-6085 Volume 12, Number 1 (2017) pp. 103-111 Research India Publications http://www.ripublication.com Review on Elements for Just in
More informationMODELING OF A SHAFT PRODUCTION SYSTEM
, TECHNOLOGIES IN MACHINE BUILDING, ISSN 11-5, 15 MODELING OF A SHAFT PRODUCTION SYSTEM Florin BURUIANA 1, Mihaela BANU, Alice BURUIANA 1 1 Department of Manufacturing Engineering, Faculty of Engineering,
More informationIntroduction. Steps to Lean IT. Sample Lean IT Processes
Introduction Topic: Making IT a Lean, Mean, Fighting Machine Presenter: John Frein, MBA, PMP Process Improvement Consultant Spectrum Health Grand Rapids, MI 1 Spectrum Health Steps to Lean IT 1.Organize
More informationImproving Scrum with. Lean Thinking Nuno Rafael SGMUN 2016
Improving Scrum with Lean Thinking Nuno Rafael Gomes @ SGMUN 2016 https://twitter.com/nrgomes https://www.linkedin.com/in/nrgomes A Product Owner in contact with Industry since 2003 1 Once upon a time
More informationJUST IN TIME (JIT), LEAN, AND TOYOTA PRODUCTION SYSTEM (TPS)
JUST IN TIME (JIT), LEAN, AND TOYOTA PRODUCTION SYSTEM (TPS) Dr. Mahmoud Abbas Mahmoud Al-Naimi Assistant Professor Industrial Engineering Branch Department of Production Engineering and Metallurgy University
More informationReal Lean vs Pretend Lean
Real Lean vs Pretend Lean What s the Difference? Roger Olson January 10, 2006 SYSTEMS Quality Consulting 1 Agenda History of Real Lean What is Real Lean Where does pretend lean come from? (Case Studies)
More informationPRODUCTION SCHEDULING PART-A
PRODUCTION SCHEDULING PART-A 1. List out any five priority sequencing rules. (Nov-2017) First come, first served (FCFS) Last come, first served (LCFS) Earliest due date (EDD) Shortest processing time (SPT)
More informationBrad Staats NE Indiana Lean Network. Dec 8, 2016
Brad Staats Dec 8, 2016 Lean Culture Traditional Way Of Thinking Cost + Profit = Selling Price Lean Culture Lean Way Of Thinking Price Cost = Profit Lean Culture The Only Way To Increase Profit Is To Decrease
More information