Transport perishable products by road
|
|
- Malcolm Shaw
- 6 years ago
- Views:
Transcription
1 Page 1 of 5 Transport perishable products by road Level 4 Credits 25 Purpose This unit standard is for those who drive, or intend to drive, road transport vehicles transporting perishable products. People credited with this unit standard are able, as a driver, to: load and unload a temperature-controlled goods service vehicle carrying perishable products; comply with legal and formal requirements when transporting perishable products by road; explain contingency plans for the transportation of perishable products by road; and deliver perishable products by road to meet contract of cartage. Subfield Domain Status Commercial Road Transport Transportation of Perishable Products by Road Registered Status date 27 July 2005 Date version published 12 February 2010 Planned review date 31 December 2011 Entry information Accreditation Standard setting body (SSB) Candidates must hold a minimum of the class of licence required for the vehicle being driven and comply with the requirements of the Land Transport (Driver Licensing) Rule Evaluation of documentation and visit by NZQA and industry. NZ Motor Industry Training Organisation (Incorporated) Accreditation and Moderation Action Plan (AMAP) reference 0092 This AMAP can be accessed at Special notes 1 References Information is available from the New Zealand Food Safety Authority website at The Official New Zealand Truck Loading Code: Code of Practice for the safety of loads on heavy vehicles, (current edition), available from booksellers.
2 Page 2 of 5 2 Definitions The cold chain is a series of interdependent operations engaged in manufacturing, transporting, storing, servicing, and retailing temperature-sensitive food products. Contingency plan refers to those actions to be taken in the event of unforeseen circumstances that cause perishable products to deteriorate in quality. Cross-docking refers to movement of goods from vehicle to vehicle, vehicle to loading dock, loading dock to vehicle, undertaken at an intermediate stage during transport to facilitate the delivery operation; Goods service vehicle means a vehicle as defined by the Land Transport Act Organisational requirements include any legal requirements, standards, codes of practice, organisational and/or site policies and procedures, industry best practice, and manufacturers' instructions. These must be available to candidates, providers, and assessors. Overseas market access requirements (OMAR) are country-specific, and place performance standards on transporters of export dairy, meat, and fish products intended for human consumption. Perishable products refers to products for human consumption that are time-, temperature-, handling- and/or regulatory-sensitive such as meat, seafood, baked goods, confectionery, dairy products, breads, fruit and vegetables. Risk-based food safety programmes are food product safety programmes based on a Hazard Analysis and Critical Control Point (HACCP) system to mitigate risk to food products. Traceability is a system of recording and monitoring the temperature and quality of perishable products during transportation from manufacturer to retailer. The Truck Loading Code is The Official New Zealand Truck Loading Code: Code of Practice for the Safety of Loads on Heavy Vehicles. 3 The legal requirements relevant to this unit standard include: Animal Products Act 1999; Health and Safety in Employment Act 1992; Land Transport Act 1998; Resource Management Act 1991; Land Transport (Driver Licensing) Rule Any new, amended, or replacement Acts, regulations, Rules, standards, codes of practice, New Zealand Food Safety Authority or NZ Transport Agency requirements or conditions affecting this unit standard will take precedence for assessment purposes, pending review of this unit standard. 5 Assessment against this unit standard shall be conducted under practical workplace conditions. Evidence is required to show consistency of performance over a period of at least three months. For credit, demonstration of competence in transporting perishable products will be at a minimum of 50% vehicle carrying capacity. The vehicle may be a rigid or combination vehicle.
3 Page 3 of 5 Elements and performance criteria Element 1 Load and unload a temperature-controlled goods service vehicle carrying perishable products. 1.1 Materials handling equipment is correctly used to load and/or unload perishable products in accordance with manufacturers instructions. may include but is not limited to pallet jack, pallet trolley, barrow, tail lift, dock leveller, dock barrow, hoist. 1.2 Use of materials handling equipment ensures safety of handler, products, and helper(s). 1.3 Vehicle loading plan meets delivery instructions and risk-based food safety programme. 1.4 Loading of perishable products demonstrates knowledge of products in terms of temperature control limits and placement in vehicle, and understanding of transfer of heat between products over time. 1.5 Unloading of perishable products is timely, ensures product safety, and is in accordance with risk-based food safety programme. 1.6 Loading and unloading of perishable products is in accordance with load plan and meets customer requirements. Element 2 Comply with legal and formal requirements when transporting perishable products by road. 2.1 Techniques used for handling perishable products minimise damage and meet the requirements of risk-based food safety programmes. 2.2 Handling and transportation of perishable products comply with roles and responsibilities of driver as defined in risk-based food safety programmes. 2.3 Handling and transportation of perishable products comply with the critical food safety limits relevant to each product. 2.4 Performance of traceability procedures, and any corrective action taken as required by measurements outside critical limits, comply with a risk-based food safety programme.
4 Page 4 of Where required, OMAR are met in accordance with organisational requirements and specific country requirements for the importation of perishable products. at least one of dairy, meat, seafood. 2.6 Security of load and load distribution within vehicle meet requirements of the Truck Loading Code. 2.7 Completed documentation meets legal and organisational requirements in terms of completeness, legibility, and accuracy. 2.8 Actions minimise stress and fatigue in accordance with requirements of occupational health and safety legislation, and meet legal and organisational requirements. Element 3 Explain contingency plans for the transportation of perishable products by road. 3.1 Legal and organisational requirements are explained in terms of communicating incident and assessment of loss, stabilisation of vehicle and/or load, security of load, and isolation of public from scene. 3.2 Organisational requirements for reporting and recording loss of load are explained in terms of cause, control, and remediation. 3.3 The explanation of driver actions to be taken in the event of an emergency requiring an alternative route is in accordance with legal and organisational requirements. Element 4 Deliver perishable products by road to meet contract of cartage. 4.1 Vehicle and vehicle loading dock are checked to ensure state of cleanliness meets requirements of risk-based food safety programme relevant to load items. Remedial actions are taken if required. pick-up, line haul, delivery, cross-docking. 4.2 Actions ensure vehicle meets legal requirements for placarding where required. 4.3 Actions taken before, during, and after transport meet risk-based food safety programme in terms of proof of temperature for delivery.
5 Page 5 of Handling and transportation of perishable products demonstrate understanding of cold chain requirements from pick-up to delivery point. pick-up, line-haul, delivery, cross-docking. 4.5 Use of temperature test equipment on pick-up meets risk-based food safety programme requirements. 4.6 Temperature test equipment meets calibration requirements. 4.7 Recording of temperature test equipment data meets risk-based food safety programme requirements. 4.8 Contingencies that arise during delivery are dealt with in accordance with legal and organisational requirements. 4.9 Delivery documentation is completed accurately and legibly in full to meet contractual obligations, and is processed in accordance with legal and organisational requirements. Please note Providers must be accredited by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be accredited by NZQA before they can register credits from assessment against unit standards. Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards. Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Comments on this unit standard Please contact NZ Motor Industry Training Organisation (Incorporated) info@mito.org.nz if you wish to suggest changes to the content of this unit standard.
Describe practices to maintain the quality of perishable products during transport by road
Page 1 of 5 Describe practices to maintain the quality of perishable products during transport by road Level 3 Credits 5 Purpose This unit standard is for those who drive, or intend to drive, road transport
More informationTransport horses by road
Page 1 of 5 Transport horses by road Level 4 Credits 25 Purpose This unit standard is for drivers of road transport vehicles carrying horses. People credited with this unit standard are able to: describe
More informationMeet Approved Handler requirements for the transport of bulk hazardous substances by road
Meet Approved Handler requirements for the transport of bulk hazardous substances by road 25986 version 1 Page 1 of 5 Level 4 Credits 6 Purpose This unit standard is for the drivers of road transport vehicles
More informationManage the transportation of hazardous substances by road
Manage the transportation of hazardous substances by road Page 1 of 5 Level 6 Credits 10 Purpose This unit standard is for carriers of goods service vehicles carrying hazardous substances. People credited
More informationGOODS SERVICE Operate a truck mounted sidelifter
1 of 6 level: 3 credit: 6 planned review date: March 2009 sub-field: purpose: entry information: accreditation option: moderation option: Commercial Road Transport People credited with this unit standard
More informationGOODS SERVICE Transport vehicles by road transporter
1 of 5 level: 4 credit: 3 planned review date: March 2009 sub-field: purpose: Commercial Road Transport This unit standard is for drivers of road haulage vehicles carrying vehicles. People credited with
More informationROAD TRANSPORT OPERATIONS Manage the transport of overdimension and overweight loads by road
1 of 7 level: 5 credit: 10 planned review date: July 2009 sub-field: purpose: Commercial Road Transport This unit standard is intended for people who are involved with managing the despatch and/or supervision
More informationNZQA registered unit standard version 3 Page 1 of 5
Page 1 of 5 Title Apply occupational health and safety requirements in the road transport and logistics industry Level 5 Credits 8 Purpose This unit standard is designed for team leaders, despatchers,
More informationCarry out routine maintenance on automotive automatic transmissions
Page 1 of 5 Carry out routine maintenance on automotive automatic transmissions Level 3 Credits 4 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit
More informationDemonstrate knowledge of servicing automotive air conditioning systems
Demonstrate knowledge of servicing automotive air conditioning systems 24448 version 1 Page 1 of 5 Level 3 Credits 2 Purpose This theory-based unit standard is for people in the automotive repair industry.
More informationTransport bulk gases by road
Page 1 of 9 Transport bulk gases by road Level 4 Credits 15 Purpose This unit standard is for drivers of road tank wagons who load, transport and unload bulk gases under pressure, including hazardous and
More informationControl pests by fumigation in the urban pest management industry
Page 1 of 5 Control pests by fumigation in the urban pest management industry Level 4 Credits 15 Purpose This is a specialist unit standard for people training for the urban pest management industry. People
More informationDemonstrate the requirements for holding permits on high voltage electrical equipment
Page 1 of 6 Demonstrate the requirements for holding permits on high voltage electrical equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: describe the requirements
More informationExplain foot and mouth disease controls in the processing of milk in the dairy industry
Page 1 of 5 Explain foot and mouth disease controls in the processing of milk in the dairy industry Level 3 Credits 4 Purpose People credited with this unit are able to: explain the features and characteristics
More informationGOODS SERVICE Transport bulk dry goods by heavy motor vehicle
1 of 7 level: 3 credit: 6 planned review date: March 2009 sub-field: purpose: entry information: accreditation option: moderation option: Commercial Road Transport People credited with this unit standard
More informationCarry out off-road motorcycle training
Page 1 of 5 Carry out off-road motorcycle training Level 5 Credits 10 Purpose People credited with this unit standard are able to: prepare for a training session in riding motorcycles off-road; conduct
More informationConfirm log grades and scale logs
Page 1 of 5 Confirm log grades and scale logs Level 3 Credits 10 Purpose People credited with this unit standard are able to: manage hazards associated with confirming log grades and scaling logs; demonstrate
More informationPUBLIC SECTOR SERVICE DELIVERY Establish client needs and gain agreement on requirements for public sector service delivery
1 of 5 level: 6 credit: 15 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationCarry out routine inspection and servicing on substation emergency services
Page 1 of 6 Carry out routine inspection and servicing on substation emergency services Level 3 Credits 4 Purpose People credited with this unit standard are able to: prepare for inspection and servicing
More informationDemonstrate and apply knowledge of leading a security team
Demonstrate and apply knowledge of leading a security team 25627 version 1 Page 1 of 7 Level 4 Credits 15 Purpose This unit standard is for security team leaders who are required to lead a team in a security
More informationPUBLIC SECTOR SERVICE DELIVERY Develop public sector service delivery objectives, and implement systems to meet client needs
1 of 5 level: 7 credit: 20 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationMaximise timber recovery
Page 1 of 6 Maximise timber recovery Level 5 Credits 25 Purpose People credited with this unit standard are able to: manage safety when maximising timber recovery; compare log supply with log specification;
More informationDemonstrate knowledge of vegetation fire behaviour
Page 1 of 5 Demonstrate knowledge of vegetation fire behaviour Level 5 Credits 8 Purpose This unit standard is for people with responsibilities for vegetation fire pre-suppression preparedness planning
More informationApply earths to and remove earths from electrical conductors, plant and equipment
Page 1 of 5 Apply earths to and remove earths from electrical conductors, plant and equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: demonstrate knowledge of earthing
More informationOutline New Zealand Greenshell mussel (kutai, kuku) farming
Outline New Zealand Greenshell mussel (kutai, kuku) farming 16337 version 3 Page 1 of 5 Level 2 Credits 10 Purpose People credited with this unit standard are able to: identify the Greenshell mussel; describe
More informationInstall and commission high voltage (HV) electricity current transformer metering
Page 1 of 5 Install and commission high voltage (HV) electricity current transformer metering Level 4 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of the
More informationSet up, repair and maintain a Baader BA 190 fish filleting machine
Set up, repair and maintain a Baader BA 190 fish filleting machine 17949 version 3 Page 1 of 6 Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 190 fish filleting
More informationMeasure and prune trees around electricity lines for vegetation control to minimum approach distance
Page 1 of 5 Measure and prune trees around electricity lines for vegetation control to minimum approach distance Level 4 Credits 8 Purpose People credited with this unit standard are able to: select tree
More informationOperate a diesel-mechanical/hydraulic railcar/multiple unit on a main line managed by a network operator
Page 1 of 5 Operate a diesel-mechanical/hydraulic railcar/multiple unit on a main line managed by a network operator Level 4 Credits 10 Purpose People credited with this unit standard are able to: prepare
More informationOperate a root crop harvester
Page 1 of 5 Operate a root crop harvester Level 4 Credits 20 Purpose People credited with this unit standard are able to: select and prepare root crop harvesting equipment and machinery; carry out field
More informationManage electricity generation dispatch
Page 1 of 6 Manage electricity generation dispatch Level 6 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of principles of power system operation; identify
More informationCarry out acceptance and maintenance tests on distance protection relays
Page 1 of 5 Carry out acceptance and maintenance tests on distance protection relays Level 5 Credits 4 Purpose People credited with this unit standard are able to: prepare for acceptance and maintenance
More informationExplain hatchery techniques used in the New Zealand aquaculture industry
Page 1 of 5 Explain hatchery techniques used in the New Zealand aquaculture industry Level 4 Credits 15 Purpose People credited with this unit standard are able to explain: the conditioning and management
More informationNZQA registered unit standard version 2 Page 1 of 7. Title Pilot an overweight load and an overdimension load as a Class 1 certified pilot
Page 1 of 7 Title Pilot an overweight load and an overdimension load as a Class 1 certified pilot Level 5 Credits 10 Purpose This unit standard is for people acting as a Class 1 certified pilot for the
More informationInstruct a programme using low ropes course activities
Page 1 of 5 Instruct a programme using low ropes course activities Level 5 Credits 5 Purpose People credited with this unit standard are able to: prepare for instructing low ropes course activities; instruct
More informationTest and service hydraulic systems on equipment, vehicles, and/or machines
Page 1 of 5 Test and service hydraulic systems on equipment, vehicles, and/or machines Level 3 Credits 6 Purpose This unit standard is for people in the automotive repair industry. People credited with
More informationOperate hydro-electric station auxiliary plant
Page 1 of 6 Operate hydro-electric station auxiliary plant Level 4 Credits 8 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles of electricity generation
More informationTrim and limb shelter belts
Page 1 of 5 Trim and limb shelter belts Level 4 Credits 10 Purpose People credited with this unit standard are able to: select and prepare trimming and limbing equipment and machinery; carry out field
More informationAssist press operator on a reel-fed printing press
Page 1 of 5 Assist press operator on a reel-fed printing press Level 2 Credits 12 Purpose People credited with this unit standard are able to: follow safety requirements for the press being used; check
More informationRemove and repair perforated non-structural body panel corrosion damage
Page 1 of 5 Remove and repair perforated non-structural body panel corrosion damage Level 3 Credits 3 Purpose This unit standard is for people who work in the motor body industry. People credited with
More informationPlan and manage helicopter overhead lines operation
Page 1 of 5 Plan and manage helicopter overhead lines operation Level 5 Credits 10 Purpose People credited with this unit standard are able, for helicopter overhead lines operations, to: plan; organise
More informationSet up, repair and maintain a Baader BA 212CK fish filleting machine
Page 1 of 5 Set up, repair and maintain a Baader BA 212CK fish filleting machine Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 212CK fish filleting machine, able
More informationPrepare a schedule of quantities, cost estimate and tender documentation for landscape work
Page 1 of 5 Prepare a schedule of quantities, cost estimate and tender documentation for landscape work Level 5 Credits 15 Purpose This unit standard is for people working, or intending to work, in landscaping.
More informationNZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of costs to the pricing of a road transport service
Page 1 of 5 Title Demonstrate and apply knowledge of costs to the pricing of a road transport service Level 5 Credits 7 Purpose This unit standard is intended for people who are required to prepare quotes
More informationEstablish quality requirements, manage, and monitor the installation of subdivision infrastructure
Page 1 of 5 Establish quality requirements, manage, and monitor the installation of subdivision infrastructure Level 6 Credits 18 Purpose This unit standard is for people who are working, or who intend
More informationNZQA registered unit standard version 1 Page 1 of 5. Develop, implement and review a HACCP application for a food processing operation
Page 1 of 5 Title Develop, implement and review a HACCP application for a food processing operation Level 5 Credits 20 Purpose This unit standard is for experienced people required to have in-depth knowledge
More informationCheck, coat and reinforce polystyrene substrate to form a Proprietary Plaster Cladding System on site
Page 1 of 5 Check, coat and reinforce polystyrene substrate to form a Proprietary Plaster Cladding System on site Level 3 Credits 20 Purpose People credited with this unit standard are able to: check polystyrene
More informationProvide career consultation to career consultation clients
Page 1 of 5 Provide career consultation to career consultation clients Level 5 Credits 20 Purpose People credited with this unit standard are able to: establish rapport with clients in the career consultation
More informationLOGISTICS OPERATIONS Plan distribution centre structure and equipment for a logistics operation
1 of 5 level: 5 credit: 8 planned review date: February 2004 sub-field: purpose: entry information: accreditation option: moderation option: Logistics People credited with this unit standard are able to:
More informationDemonstrate an advanced knowledge of railway signals
Page 1 of 5 Demonstrate an advanced knowledge of railway signals Level 4 Credits 15 Purpose People credited with this unit standard are able to: demonstrate an advanced knowledge of fixed railway signals,
More informationVEHICLE BODYWORK Mask a repair for priming; and prime, fill, and sand a repair in the motor body industry
1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21703 replaced unit standard 3868 and unit standard
More informationUse advanced felling techniques in arboriculture
Page 1 of 5 Use advanced felling techniques in arboriculture Level 4 Credits 10 Purpose This unit standard is for people wishing to extend their tree felling skills in an arboriculture situation. People
More informationMaintain court security
Page 1 of 8 Maintain court security Level 4 Credits 20 Purpose This unit standard is for court security officers employed by the Ministry of Justice to maintain security in courts. People credited with
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and service on oil filled distribution power transformers 11kV to 400V
1 of 8 level: 4 credit: 8 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for routine service transformers
More informationCarry out general service checks on non-electric forklifts and forklift attachments
Page 1 of 5 Carry out general service checks on non-electric forklifts and forklift attachments Level 3 Credits 4 Purpose This unit standard is for people in the materials handling equipment repair industry.
More informationPUBLIC SECTOR COMPLIANCE MANAGEMENT Audit quality management systems for compliance with weights and measures legislation
1 of 6 level: 6 credit: 13 planned review date: December 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationDEMOLITION Operate a hydraulic excavator on demolition sites
1 of 7 level: 3 credit: 25 planned review date: November 2007 sub-field: purpose: entry information: accreditation option: moderation option: Civil Works and Services People credited with this unit standard
More informationNZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident
Page 1 of 5 Title Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: the interrelated
More informationStore, maintain, and distribute liquid food or related products using automated systems
Page 1 of 5 Store, maintain, and distribute liquid food or related products using automated systems Level 3 Credits 3 Purpose This unit standard is for people who are currently working, or who intend to
More informationMake ready a sheet-fed offset printing press for spot colour work
Make ready a sheet-fed offset printing press for spot colour work 26318 version 1 Page 1 of 5 Level 3 Credits 30 Purpose People credited with this unit standard are able to: check job documentation and
More informationNational Certificate in Wood Manufacturing - Generic Skills (Workplace Safety and Operations) (Level 2) Level 2
NZQF NQ Ref 1304 Version 4 Page 1 of 10 National Certificate in Wood Manufacturing - Generic Skills (Workplace Safety and Operations) (Level 2) Level 2 Credits 43 This qualification has been reviewed.
More informationProduce screens, and make stencils using the capillary system, for screen printing
Page 1 of 5 Produce screens, and make stencils using the capillary system, for screen printing Level 3 Credits 12 Purpose People credited with this unit standard are able to: check documentation and confirm
More informationCheck, coat and reinforce fibre cement substrate to form a Proprietary Plaster Cladding System on site
Page 1 of 5 Check, coat and reinforce fibre cement substrate to form a Proprietary Plaster Cladding System on site Level 3 Credits 20 Purpose People credited with this unit standard are able to: check
More informationNZQA registered unit standard version 4 Page 1 of 5. Operate power-operated elevating work platforms (EWP) in an electricity supply environment
Page 1 of 5 Title Operate power-operated elevating work platforms (EWP) in an electricity supply environment Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge
More informationCarry out routine inspection and servicing on high voltage bulk oil circuit breakers
Page 1 of 6 Carry out routine inspection and servicing on high voltage bulk oil circuit breakers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare for inspection, testing
More informationNZQA registered unit standard version 2 Page 1 of 5. Apply design principles in the design of scaffolding
Page 1 of 5 Title Apply design principles in the design of scaffolding Level 5 Credits 12 Purpose This unit standard is for people who have intermediate scaffolding skills and who want to develop their
More informationNZQA registered unit standard version 5 Page 1 of 6. Operate hydro-electric generating plant from enterprise control room
Page 1 of 6 Title Operate hydro-electric generating plant from enterprise control room Level 6 Credits 16 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles
More informationReview, revision and rollover, and change of standard setting responsibility for Marketing unit standards
Page 1 of 7 Field Business Review, revision and rollover, and change of standard setting responsibility for unit standards Subfield Domain ID Advertising 5504-5526 International 2957-2961 - Import and
More informationNZQA registered unit standard 5555 version 6 Page 1 of 5
Page 1 of 5 Title Arrange and manage a visitor conference Level 5 Credits 20 Purpose People credited with this unit standard are able to: plan operations for a visitor conference; manage monetary, human
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and servicing on high voltage minimum oil circuit breakers
1 of 9 level: 4 credit: 6 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for inspection, testing
More informationAUTOMOTIVE WORKSHOP ENGINEERING Demonstrate good work habits and perform safe work practices in the motor and related industries
1 of 6 level: 2 credit: 4 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard replaced unit standard 226 and unit standard 16098. purpose: entry information:
More informationMaintain amenity trees and shrubs
Page 1 of 5 Maintain amenity trees and shrubs Level 3 Credits 8 Purpose People credited with this unit standard are able to: control weeds and ground cover under amenity trees and shrubs; describe irrigation
More informationThis unit standard is expiring
Page 1 of 5 Title Apply intelligence analysis techniques to complete an intelligence product Level 5 Credits 15 Purpose People credited with this unit standard are able to: define the intelligence problem
More informationVEHICLE BODYWORK Detail and groom a vehicle
1 of 5 level: 2 credit: 4 planned review date: December 2009 sub-field: purpose: entry information: accreditation option: moderation option: Motor Industry People credited with this unit standard are able
More informationNZQA registered unit standard 1768 version 5 Page 1 of 6. Title Pilot an overweight load and an overdimension load as a Class 2 certified pilot
Page 1 of 6 Title Pilot an overweight load and an overdimension load as a Class 2 certified pilot Level 4 Credits 10 Purpose This unit standard is for people acting as a Class 2 certified pilot for the
More informationSECURITY STAFF SERVICES Demonstrate knowledge of and operate electronic equipment as a security officer
1 of 5 level: 3 credit: 5 planned review date: March 2007 sub-field: purpose: Security This unit standard covers the use of electronic equipment for security s. People credited with this unit standard
More informationSECURITY STAFF SERVICES Demonstrate knowledge of protective. Security
1 of 6 level: 3 credit: 7 planned review date: March 2007 sub-field: purpose: Security This unit standard is for people who work or intend to work in. People credited with this unit standard are able to:
More informationNZQA registered unit standard 9506 version 5 Page 1 of 5. Conduct a sample analysis in a petrochemical laboratory
Page 1 of 5 Title Conduct a sample analysis in a petrochemical laboratory Level 4 Credits 6 Purpose This unit standard is for people employed in the petrochemical industry. People credited with this unit
More informationAUTOMOTIVE WORKSHOP ENGINEERING Use an oxy-acetylene welding plant in the motor industry
1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21682 replaced unit standard 230 and unit standard 3885.
More informationNZQA registered unit standard version 1 Page 1 of 5. Determine and describe construction of medium and large buildings
Page 1 of 5 Title Determine and describe construction of medium and large buildings Level 6 Credits 20 Purpose People credited with this unit standard are able to, for medium and large buildings, determine
More informationNational Certificate in Freight Forwarding (Freight Administration)
NZQF NQ Ref 1243 Version 3 Page 1 of 6 National Certificate in Freight Forwarding (Freight Administration) Level 3 Credits 69 This qualification is expiring. The last date to meet the requirements is 31
More informationCarry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus
Page 1 of 7 Carry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus Level 4 Credits 4 Purpose People credited with this unit standard are able to: prepare for
More informationDemonstrate knowledge of the principles of organic horticultural production
Demonstrate knowledge of the principles of organic horticultural production 21043 version 1 Page 1 of 5 Level 3 Credits 20 Purpose People credited with this unit standard are able to: demonstrate knowledge
More informationFacilitate change for Iwi/Māori social service purposes
Page 1 of 5 Facilitate change for Iwi/Māori social service purposes Level 6 Credits 6 Purpose This is a generic unit standard for people in Iwi/Māori social service settings who have or intend to have
More informationPOULTRY MANAGEMENT Manage hatchery operations
1 of 5 level: 4 credit: 32 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Poultry Production People credited with this unit standard
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Slice and package bread in a plant bakery Level 4 Credits 10 Purpose This unit standard is for people working or intending to work in a plant bakery as a baking tradesperson. People credited
More informationNZQA registered unit standard 1512 version 8 Page 1 of 6
Page 1 of 6 Title Supervise asphalt paving construction activities Level 4 Credits 18 Purpose This unit standard is designed for people working in the pavement surfacing industry, towards recognition of
More informationDemonstrate knowledge of the fundamentals of power system earthing
Page 1 of 5 Demonstrate knowledge of the fundamentals of power system earthing Level 7 Credits 15 Purpose People credited with this unit standard are able to: compile an explanation on the purpose of earthing;
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Demonstrate the requirements for holding access permits for work on high voltage electrical lines, cables, and equipment Level 3 Credits 4 Purpose People credited with this unit standard
More informationLevel 2 Certificate/Diploma for Sustainable Waste Management Operative (0746)
Level 2 Certificate/Diploma for Sustainable Waste Management Operative (0746) Qualification handbook for centres www.cityandguilds.com August 2017, Version 3.1 General Route (0746-20) (600/0646/8) Waste
More informationLevel 3 Certificate for Traffic Office ( )
Level 3 Certificate for Traffic Office (3438-02) Qualification handbook 501/2233/2 www.cityandguilds.com May 2011 Version 1.2 (July 2011) About City & Guilds As the UK s leading vocational education organisation,
More informationNZQA registered unit standard Version 1 Page 1 of 5. Demonstrate operational knowledge of the law in a regulatory compliance context
Page 1 of 5 Title Demonstrate operational knowledge of the law in a regulatory compliance context Level 4 Credits 12 Purpose People credited with this unit standard are able to: demonstrate knowledge of
More informationEMPLOYMENT SUPPORT Demonstrate an integrated practice theory for employment support
1 of 8 level: 6 credit: 15 planned review date: June 2005 sub-field: purpose: entry information: accreditation option: moderation option: Social Services People credited with this unit standard are able
More informationQUALIFICATION HANDBOOK
QUALIFICATION HANDBOOK Level 2 Certificate in Logistics Operations (3439-06) November 2011 Version 1.0 Qualification at a glance Subject area City & Guilds number 3439 Age group approved 16+ Entry requirements
More informationNZQA registered unit standard version 3 Page 1 of 5. Install high voltage (HV) electricity network overhead conductors
Page 1 of 5 Title Install high voltage (HV) electricity network overhead conductors Level 4 Credits 8 Purpose People credited with this unit standard are able to: interpret scope of work for installing
More informationNational Certificate in Concrete Construction (Sawing and Drilling) (Level 3)
NZQF NQ Ref 1613 Version 1 Page 1 of 6 National Certificate in Concrete Construction (Sawing and Drilling) (Level 3) Level 3 Credits 74 Purpose The National Certificate in Concrete Construction (Sawing
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2019.
NZQF NQ Ref 1043 Version 5 Page 1 of 8 National Certificate in Dairy Manufacturing (Process Skills) (Level 3) with strands in Processing, and Supply Chain, and with optional strands in Performance Improvement,
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2010.
NQF Ref 0141 Version 5 Page 1 of 8 National Certificate in Energy and Chemical Plant (Process Operation) (Level 4) with optional strands in Refrigeration, Steam Generation, Ancillary Operations, Geothermal,
More informationNZQA registered unit standard version 1 Page 1 of 5. Identify and inspect road safety barrier systems on Infrastructure Works sites
Page 1 of 5 Title Identify and inspect road safety barrier systems on Infrastructure Works sites Level 4 Credits 10 Purpose People credited with this unit standard are able to: identify and explain road
More informationLevel 2 Certificate in Warehousing and Storage
Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 6 Support for candidates 6 Assessment 7 Internal quality assurance
More information