Korea Aerospace Industries, Ltd. KAI Procurement Quality Management System Requirements for Suppliers (KPQMS 9100)
|
|
- Kellie Boyd
- 6 years ago
- Views:
Transcription
1 KPQMS 9100 Rev. 04 Release Date: KAI Procurement Quality Management System Requirements (KPQMS 9100) Korea Aerospace Industries, Ltd.
2 Revision status Rev. No. Para. Pages Description Revision Date New All All.Initial Issued (Substituted for PQA-9001) ~ 7 4 ~ 9.Required Quality System revised Quality Record Preservation period revised.organization name change (Before: DQAA, Current: DTaQ) AS 9003 requirement deleted.change of Quality system - Before: AS After : AS / / ~ b/c 6 7 Attachment ~9 - -.Paragraph added.kpqms 9100/QAS Web site added.as 9110/AS 9120 Web site added.definition Change.Clarification of paragraph.edition of paragraph.edition of quality system requirements.qap and QAS requirements added.aircraft manufacturer added.as 9110/AS 9120 requirements added.deleted.deleted Page 1 of 8
3 TABLE OF CONTENTS Chapter Title Page. Revision Status. 1. Table of Contents Purpose Scope of Application Bibliography Definition General requirements Quality System requirements. 7 Page 2 of 8
4 1. Purpose This document is aimed at specifying requirements for supplier s quality system which products or service that will be provided to Korea Aerospace Industries(hereinafter referred to KAI ). 2. Scope of application 2.1 Application a.this specification shall apply when incorporated by reference in contract or purchase order between KAI and supplier which provides products or service. b.where any requirement(s) of this document cannot be applied due to the nature of supplier and its product, this can be considered for exclusion. Where exclusions are made, such exclusions do not affect the Supplier s ability, or responsibility, to provide product that meets customer and applicable regulatory requirements. 2.2 Relationship with other requirements. Supplier shall comply with all contract requirements and have responsibility to supply the products which conform to the requirements. When conflicts between this requirement and contract requirement, the contract requirement shall take precedence. 2.3 Effectiveness of revised requirements a.the supplier who does not meet the requirements of this specification, shall notify KAI with document form and discuss with KAI. b.when this requirements are revised after the previous version is in effective, the supplier shall follow the revised requirements based on the cost is not effected and may flow down to supplier s sub-contractor. c.in case that the supplier will follow the revised requirements, the supplier shall notify KAI of the decision with document form and then, the supplier shall apply the revised requirements to its products or service. 3. Bibliography 3.1 KPQMS 9100 KAI Procurement QMS requirements for supplier a. Web site address: QAS Quality Assurance Specification a. Web site address: AS 9100 Quality Management Systems Aerospace - Requirements Page 3 of 8
5 3.4 KDS Quality Management Systems Military a. Web site address: ISO9001:2000 / KS A 9001: Quality Management Systems Requirements a. Web site address: AS 9003 Inspection and Test Quality System 3.7 AS 9006 Deliverable Aerospace software supplement for AS9100A 3.8 AS 9110 Quality Maintenance Systems-Aerospace Requirements for Maintenance Organizations 3.9 AS 9120 Quality Management Systems-Aerospace Requirements for Stockist Distributors 3.10 Quality System Requirements for DPD (Digital Product Definition) - Boeing Program a. Web site address: ISO General requirements for the competence of testing and calibration laboratories a. Web site address: CMMI (Capability Maturity Model Integration) Software program a. Web site address: 4. Definitions 4.1 Supplier All companies which provide products or service to KAI. According to which products or service is provided, supplier class is divided from class 1 supplier through class 11 supplier. 4.2 Quality Assurance Plan (QAP) A document that describes all quality assurance activities to meet contractual requirements for delivered products or service. It is consisted with quality system section and inspection section for the requirements of drawings and specifications. It should be written based on the nature of delivered products or service. 4.3 Supplier Quality Assurance Specification (QAS) A specification that describes supplier quality assurance requirements and it can be referred to KAI Web-site Page 4 of 8
6 4.4 DPD (Digital Product Definition) The electronic data elements that specify the geometry and all design requirements for a product (including notation and parts lists), and the use of this data throughout an integrated CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) and CMS(Coordinate Measurement Systems). 5. General Requirements 5.1 Approval of Quality system Supplier shall establish and maintain an effective quality system that complies with this document requirements in order to provide their products and service to KAI and be approved by KAI. 5.2 Additional Quality Assurance Requirements In addition to the provisions provided in this document, the Supplier shall also comply with the following quality assurance requirement; a. Quality Assurance/Inspection & Test requirements noted on applicable design specifications. - For example, drawings, special process, and material specifications b. Quality Assurance requirements under the regulations of applicable government and noted on the contractual documents 5.3 Corrective Actions When KAI issues an written corrective action, supplier shall provide response to the corrective action request within the due date. 5.4 Entry of right KAI and/or KAI customer shall be afforded the right to verify conformity of the Supplier quality system or verify the product in accordance with the specified requirements at the Supplier premises and/or the supplier s premises. a. Upon request, the quality records, equipment, or personnel shall be made available to KAI and/or KAI customer for operation of equipment and other support as deemed necessary. b. Verification by KAI and/or the KAI customer shall not absolve the Supplier of the responsibility to provide acceptable product. 5.5 Periodic Audit Unless otherwise specified requirements, KAI-approved supplier shall acknowledge that KAI reserves the right to audit or monitor the quality system, no less than once a year, during the life of the contract. At KAI discretion, the supplier that complies to the followings may be subjected to survey by every three-year. a. Certified as AS 9100 Quality Management System or KDS Quality Management System b. Complies with the requirements of KAI required Quality System - The 3 rd party registrar 5.6 Cancellation of Quality System Approval Page 5 of 8
7 When the supplier comes under the following conditions, KAI has the right to cancel the approval of KPQMS 9100 for the supplier without any notice. a. In case major nonconformance is found in the product and/or services, at KAI discretion, if the supplier is not able to comply with the specified requirements b. If the business with KAI has ceased for two years c. If the quality system audit is not performed on purpose annually without written approval of KAI or the supplier has refused or has not performed any proper action without an acceptable reason when corrective is requested by KAI. 5.7 Responsibilities of Supplier a. When it comes under the following conditions, the supplier shall notify an written letter within 7 days. - When it is discovered that a discrepant product has already been delivered and/or has been shipped in suspect. - Cancellation or Suspension of the issued Certificate by the 3 rd party registrar b. The supplier shall assure that the accepted product delivery to KAI including all products purchased from KAI-designated sources. c. The inspection status of the product shall be identified by authorized stamps on the product itself or tags, labels, packaging, manufacturing plans, inspection records and other suitable means. - The final acceptance of all deliverable products shall be identify using authorized stamp on the products or the quality shipping document. 6. Quality System requirements Quality system requirements are as followings and detail information shall be referred to applicable Web site per paragraph 3. For military program case, the required system is KDS , Quality Management System for domestic supplier, if necessary, AS 9100, Quality Management System-Aerospace requirement can be applied as alternate. When DPD(Digital Product definition) is required for production, KAI may request to add DPD (Digital product Definition) quality system requirement. The requirements of these paragraphs shall be applied multiply when more than two classes are provided to KAI. 6.1 KPQMS 9100 Class 1 supplier Supplier who manufactures major structure assembly (for example: Wing/Fuselage assembly, Tailboom assembly) and required quality system is AS The supplier shall submit QAP to KAI in 30 days after contract. Required QAS(as minimum) are as QAS-1301, QAS-1601, QAS-1603, QAS KPQMS 9100 Class 2 supplier Page 6 of 8
8 Supplier who manufactures LRU(Line Replaceable Unit) which is final assembly form and functional item (for example: Engine, Landing gear, Hydraulic manipulation, Airborne electric system) and required quality system is AS KPQMS 9100 Class 3 supplier Supplier who manufactures detail part or minor assembly (for example: Sheet-metal/Machining/ Composite part, sub-assembly) and required quality system is AS The supplier shall submit QAP to KAI in 30 days after contract. Required QAS(as minimum) are as QAS-0501, QAS-0801, QAS-0901, QAS-0902, QAS-1001, QAS-1002, QAS-1301, QAS-1303, QAS-1602, QAS-1603, QAS-1801, QAS KPQMS 9100 Class 4 supplier Supplier who manufactures raw materials, consumables and standard fasteners (for example: Sheet/ Plate/Extrusion, Composite material/paint/adhesive, Bolt/Nut/Rivet) and required quality system is AS 9100 or ISO KPQMS 9100 Class 5 supplier Supplier who proceeds limited operations (for example: Surface treatment/bonding/painting, Sawing) and required quality system is AS 9100(for special processor), ISO 9001(for simple operation processor like sawing) and submittal of QAP is not necessary. Minimum required QAS are as QAS-1301, QAS-1303, QAS-1603, QAS KPQMS 9100 Class 6 supplier Shall be applied to distributor and required quality system is AS KPQMS 9100 Class 7 supplier Supplier who delivers software end item or as part of a deliverable software-supported product that is either designed or modified to meet KAI requirements. Required quality system is AS 9006 or CMMI Level 3 or higher. The supplier shall submit QAP to KAI in 30 days after contract. 6.8 KPQMS 9100 Class 8 supplier Supplier who manufactures Integrated Logistics Support(Non Airborne), Tooling (for example: Ground Support/Test Equipment, Assembly Jig, Detail part tool) and required quality system is ISO KPQMS 9100 Class 9 supplier Supplier who provides maintenance, repair and overhaul(for example: Engine/Fuselage repair) and required system is AS The supplier shall submit QAP to KAI in 30 days after contract KPQMS 9100 Class 10 supplier Supplier who provides testing, calibration (for example: Environmental/Specimen test, calibration service) and required quality system is ISO/IEC The supplier shall be approved by KOLAS (Korea Laboratory Accreditation Scheme) or a certification body which is approved by the applicable country accreditation or it s equivalent quality system proven by with objective evidence. In military program case, the domestic supplier can be included DTaQ(Defense Agency for Technology and Quality) approved source for test service. Page 7 of 8
9 6.11 KPQMS 9100 Class 11 supplier Supplier who provides equipment/facility, one-time process or man-power (foe example: Seller of production equipment/facility, Temporary process with KAI instruction, Man-power service) and required quality system is none. But additional contract requirements could be applied to supplier in accordance with products, process, service which are required. Page 8 of 8
Satellite Aerospace, Inc. TERMS & CONDITIONS Page 1 of 6
TERMS & CONDITIONS Page 1 of 6 1.0 PURPOSE 1.1 Satellite Aerospace, Inc. Quality Requirements to Subtier Sources. 2.0 SCOPE 2.1 This document applies to all purchasing and sales personnel responsible for
More informationTURBO MACH A DIVISION OF VT SAA
TERMS AND CONDITIONS PAGE: 1 OF 5 1. PURPOSE To define specific terms and conditions for the purchase of product, materials and services. 2. SCOPE All products, materials and services purchased for use
More informationClauses applicable only when specified by Q-number on the purchase order.
Clauses applicable only when specified by Q-number on the purchase order. Q1 Certification of Raw Materials. Seller shall provide with each shipment, a certification of conformance to ARROW s specification
More informationReplaces: Not applicable.
Page 1/12 SCOPE - defines the quality requirements for purchasing materials, parts and services that may affect product quality of Airborne items. does not include requirements for design and development
More informationSHELTON INDUSTRIAL PATTERN INC.
Defintions: Seller : Supplier of materials, parts and or services that support production Supplies : materials, parts that support production FOD : Foreign Object Debri / Damage 1. Quality Management System
More informationPURCHASING QUALITY CLAUSES
Page 1 of 5 These requirements apply to all suppliers A. Right of Entry Tri Models, Tri Model s customer and their customers or applicable regulatory agencies shall have right of access to all facilities,
More informationTable of Contents Table of Contents... 2 Introduction to Manual... 3 Scope... 3
Supplier Quality Manual Original Issue 12 February 2015 Uncontrolled in printed form Page 1 of 8 f Table of Contents Table of Contents... 2 Introduction to Manual... 3 Scope... 3 Supplier Responsibility...3
More informationSatellite Aerospace, Inc. TERMS & CONDITIONS Page 1 of 5
TERMS & CONDITIONS Page 1 of 5 1.0 PURPOSE 1.1 Quality Requirements to Subtier Sources. 2.0 SCOPE 2.1 This document applies to all purchasing and sales personnel responsible for the flow down of Quality
More informationDocument Rev: 18 State: RELEASED see Smarteam for approval authorities TASK REQUIREMENTS. Supplier Quality Requirements
Document 0000000000000045 Rev: State: RELEASED see Smarteam for approval authorities This document is applicable only to suppliers of Production Items as defined below and their sub-tier suppliers. Non-
More informationThese requirements apply to all suppliers:
Page 1 of 5 These requirements apply to all suppliers: A. Right of Entry Tri Models, Tri Model s customer and their customers or applicable regulatory agencies shall have right of access to all facilities,
More informationSupplier Quality Clauses
Page: 1 of 9 Supplier 425 Strempel St. Seguin, TX 78155 Page: 2 of 9 1.0 PURPOSE 1.1 The purpose of this this Quality Clause Document is to specify requirements by which Quality/Production activities shall
More informationSUPPLIER QUALITY REQUIREMENTS (SQR S)
SUPPLIER QUALITY REQUIREMENTS (SQR S) Q01 Q02 Q03 Q04 Q05 Q06 MANDATORY AMRO SOURCE INSPECTION When specified on individual Purchase Orders, Amro Source Inspection shall be performed at supplier s facility
More informationCURTISS WRIGHT Actuation Systems 201 Old Boiling Springs Rd Shelby, NC SUPPLIER QUALITY REQUIREMENTS SQR-100. Rev. L.
CURTISS WRIGHT Actuation Systems 201 Old Boiling Springs Rd Shelby, NC 28152-8008 SUPPLIER QUALITY REQUIREMENTS SQR-100 Rev. L Approved by: PREFACE This document is to be used to define the quality requirements
More informationExternal Providers Quality Requirements.
External Providers Quality Requirements. 1. General Requirements. 1.1 Introduction. This document establishes the quality assurance requirements for external providers of process, product and service pursuant
More informationSUPPLY AND INSTALLATION OF TURBINES AND GENERATORS CONTRACT SCHEDULE 8 QUALITY MANAGEMENT TABLE OF CONTENTS
SUPPLY AND INSTALLATION OF TURBINES AND GENERATORS CONTRACT SCHEDULE 8 QUALITY MANAGEMENT TABLE OF CONTENTS 1 INTERPRETATION... 1 1.1 Definitions... 1 2 QUALITY MANAGEMENT SYSTEM... 2 2.1 Quality Management
More informationTASK REQUIREMENTS. Supplier Quality Requirements
This document is applicable only to suppliers of Production Items as defined below and their subtier suppliers. Non-Production Item suppliers are not subject to this document. This document specifies the
More informationMeggitt Oregon Purchase Order Quality Notes
QP-1 QP-2 QP-3 QP-4 QP-5 QP-6 QP-7 QP-8 Inspection System: Supplier shall maintain an inspection system that complies with ISO 9001; AS9100; Meggitt Supplier Quality Requirements Document - MPRC-10, or
More informationTrident Precision Manufacturing
Trident Precision Manufacturing QASQC Rev. A 6/7/06 Title: Supplier Quality Clauses Author: April V. Lusk Director of Quality General Suppliers are responsible for compliance to all stated Quality Clauses
More information2.2. The Seller shall be responsible for achieving and maintaining a quality performance level of either:
2.0. Supplier Quality Performance: 2.1. When requested by Boeing, Seller agrees to work with Boeing to develop and implement processes designed at improving Seller s quality performance. Process will include
More informationQuality Management Systems - Requirements for Aviation, Space and Defense Organizations (AS9100)
Effective Date: 04/07/2014 AJR1: Quality Management Systems - Requirements for Aviation, Space and Defense Organizations (AS9100) During the performance of this Contract/Purchase Order (C/PO), the seller
More informationQuality Assurance Procedure Issued: 15NOV2017 Page 1 of 11
Quality Assurance Procedure Issued: 15NOV2017 Page 1 of 11 1.0 Purpose To ensure that Fleet Canada states applicable requirements for purchased products on purchase orders and applicable documents. Requirements
More informationHelical Products Company
Q01 GENERAL REQUIREMENTS 1. Supplier Responsibilities 1.1. Delivery Certification By delivering products or services on the Contract, the Supplier certifies that such products or services are in compliance
More informationSUPPLIER QUALITY REQUIREMENTS (SQR S)
SUPPLIER QUALITY REQUIREMENTS (SQR S) Q01 Q02 Q03 Q04 Q05 Q06 MANDATORY AMRO SOURCE INSPECTION When specified on individual Purchase Orders, AMRO Source Inspection shall be performed at supplier s facility
More informationQuality Assurance Procedure Issued: 14FEB2017 Page 1 of 11 PURCHASING. Issue 0 Revision 9 QAP 6.0
Quality Assurance Procedure Issued: 14FEB2017 Page 1 of 11 Please note that the old MRP system called Phoenix has been replaced by a new ERP system called Epicor. As a result, affected QAPs will be revised
More informationCopyright JnF Specialties. All rights reserved worldwide.
Copyright JnF Specialties, LLC. All rights reserved worldwide. www.quality-control-plan.com/copyright.htm Revisions Rev: Letter E.O. Number - Description Date Used On Prepared By: President: Quality: Your
More informationAero-Tech Engineering (ATEI) Quality Clauses
(ATEI) Quality Clauses 1. Right of Entry Upon acceptance of the PO/Contract, supplier agrees to provide right of entry to supplier s facility, to ( ATEI ) and any applicable regulatory agency. 2. Special
More informationGENERIC QUALITY ASSURANCE REQUIREMENTS FOR: BUILT TO PRINT ITEMS, ITEMS TO STANDARD AND OFF THE SHELF ITEMS
GENERIC QUALITY ASSURANCE REQUIREMENTS FOR: BUILT TO PRINT ITEMS, ITEMS TO STANDARD AND OFF THE SHELF ITEMS APPLICABLE FOR: AIRBUS DEFENCE AND SPACE - SPACE BUSINESS UNIT ORBITAL ISSUE: 02c RELEASE DATE:
More informationQUALITY REQUIREMENTS FOR SUPPLIERS
Quality Requirements for Suppliers to DSG Air. Applicability: DSG Air Edition/Issue: II/5 Sponsor: Chief Executive Review: >April 2015< Stakeholders: DSG Air Procurement and Compliance Managers DSG Configuration
More informationSupplier Quality Requirements
1 of 7 NOTE: YELLOW HI-LITE INDICATES CHANGE FROM THE PREVIOUS REVISION GENERAL REQUIREMENTS (Applies to all orders issued from GMW referencing this document) QR-01 Quality Management Systems AS9100 Suppliers:
More informationIKHANA Aircraft Services, Fabrication Division PO Quality Clauses
Quality Requirements The following requirements apply at minimum, additional requirements may be incorporated with the company purchase order. Material and Hardware Providers - Q1, Q2, Q3, Q4, Q5, Q8,
More informationQP Supplier Quality Requirements Manual. Purchasing. Dearborn Inc. Revision: E Page 1 of PURPOSE
Page 1 of 8 1.0 PURPOSE 1.1 The purpose of this manual is to have a single document which conveys the minimum quality requirements and manufacturing practices expected of suppliers for value added products
More informationControlled By: QA Mgr. / Gen. Mgr. Effective Date: 3/31/2014 FORM-70
Controlled By: QA Mgr. / Gen. Mgr. Effective Date: 3/31/2014 FORM-70 RUSSTECH PURCHASE ORDER CLAUSES RPOC 1000 EARLY DELIVERY OK "Time is of the essence for performance under this Purchase Order. Seller
More information2. GENERAL REQUIREMENTS
1. PURPOSE AND SCOPE 1.1 This document defines the Supplier Quality Requirements to be met by suppliers in the performance of the purchase order issued by Sagetech to ensure that externally provided processes,
More informationAppendix QI. Intra-Lockheed Martin Work Transfer Agreement (IWTA) Quality Requirements for Deliverable Items
Intra-Lockheed Martin Work Transfer Agreement (IWTA) Quality Requirements for Deliverable Items REVISION RECORD The latest issue to this document is the version that is available on the Lockheed Martin
More informationQUALITY REQUIREMENTS FOR SUPPLIERS
NMB-Minebea UK Ltd Phone: +44 (0)1522 500 933 Doddington Road, Lincoln, Fax: +44 (0)1522 500 975 Lincolnshire LN6 3RA United Kingdom URL: http://www.minebea.co.jp QUALITY REQUIREMENTS FOR SUPPLIERS LNQA0500
More informationASA-100 QUALITY MANUAL
ASA-100 QUALITY MANUAL Origination Date: XXXX Document Identifier: Date: Document Revision: Latest Revision Date Abstract: This quality manual describes (your Company's) quality management system policies
More informationSupplier Quality Assurance Requirements
1 Scope No. 1.1 This document details the requirements to be satisfied by suppliers to Tekdata Interconnections Ltd (TIL). TIL requires each supplier and their sub-tier suppliers to comply with the quality
More informationAltech Machining, Inc. Terms and Conditions
11000 Woodside Avenue North Phone: (619) 448-3392 Santee, CA 92071 Fax: (619) 448-6854 info@altechmachining.net Altech Machining, Inc. Terms and Conditions The terms and conditions listed in this document
More informationCAG 9000 QUALITY REQIRMENTS FOR SUPPLIERS TYPE 12 & 13.
CAG 9000 QUALITY REQIRMENTS FOR SUPPLIERS TYPE 12 & 13. REVISION NO. : 9 DATE : 21.6.06 APPROVED BY : B. FRUMKES - QM -DIRECTOR Doc. No.: CAG 9000 Page 1 of 12 Pages CONTENTS AND PARAGRAPH INDEX PARAGRAPH
More informationThinKom Purchase Order Quality Provisions Number: Q4000 Revision: D
1 Purpose and Scope This is a reference document that specifies product unique quality requirements, in addition to those shown on the engineering drawing. These requirements are specified by number on
More informationReport number A0436 PRODUCT REQUIREMENTS FOR SELLERS OF BOEING DESIGNED DETAIL PARTS AND NON-FUNCTIONAL MINOR ASSEMBLIES
Report number A0436 PRODUCT REQUIREMENTS FOR SELLERS OF BOEING DESIGNED DETAIL PARTS AND NON-FUNCTIONAL MINOR ASSEMBLIES Revision date 14 DEC 2007 Revision letter T Issue date 30 APRIL 1970 Contract number
More informationGRMA-032-PRO-00 Page 1 of 8
GRMA-032-PRO-00 Page 1 of 8 GR9100 - Goodrich Quality Requirements for Suppliers Author: Frank Reynolds Issue Date: January 2, 2012 Effective Date: March 2, 2012 1.0 PURPOSE / SCOPE 1.1 This document,
More informationSupplier Quality Requirements
Page 1 of 5 SQR-01 Quality Management Systems AS9100 Suppliers: The supplier will at a minimum maintain and implement a documented quality management system, available in the English language, which is
More informationSupplier Quality Requirements
1 of 7 NOTE: YELLOW HI-LITE INDICATES CHANGE FROM THE PREVIOUS REVISION GENERAL REQUIREMENTS (Applies to all orders issued from GMW referencing this document) QR-01 Quality Management Systems AS9100 Suppliers:
More informationAP Quality Consulting works with you to provide a custom solution
AP Quality Consulting works with you to provide a custom solution ISO 9001, ISO/IEC 17025, AS6081, AS5553, AS6171 (in development) Quality auditing and management of internal audit program Corporate training
More informationSELLER QUALITY REQUIREMENTS QCS-001 PROCESSING SOURCES
Page 1 SELLER QUALITY REQUIREMENTS QCS-001 PROCESSING SOURCES Notice: A hard copy of this document may not be the document currently in effect. The current version is always the version on the Lockheed
More informationD.P.E.LTD QUALITY CONTROL PROCEDURE NO 9 QUALITY CONTROL REQUIREMENTS FOR SUPPLIERS MASTER COPY
Page 1 of 8 D.P.E.LTD QUALITY CONTROL PROCEDURE NO 9 QUALITY CONTROL REQUIREMENTS FOR SUPPLIERS MASTER COPY REF: DPE/Q.C.P.9 Dated: 19/10/2010 Approved By: P Knight Title: Quality Manager Signed: Page
More informationSupplier Quality Requirements Manual AEC-300
Page 1 of 12 Supplier Quality Requirements Manual AEC-300 Page 2 of 12 Revision History Rev. Level Section Description DCN Date NC ALL Initial Release DCN-0094 2010-02-24 A 1 Paragraph 16: Software Control
More informationPURCHASE ORDER PROCUREMENT CLAUSES QA25 Rev N Date: 11/13/2016
GENERAL REQUIREMENTS The general Procurement Clauses as listed in Section 1 are applicable to all Sanders Purchase Orders as they pertain to the product being purchased. (for example: A First Article Report
More informationPURCHASING QUALITY CLAUSES
PURCHASING QUALITY CLAUSES AS9120:2016, Clause 8.4 AvAir, Inc. Chandler, AZ Revision C Approvals Purchasing Quality Clauses Refer to the Documented Information Register. Revision History Listed below are
More informationFLYSHEET 100 Rev. 14 QUALITY SYSTEM REQUIREMENTS
FLYSHEET 100 Rev. 14 QUALITY SYSTEM REQUIREMENTS In addition to the applicable Quality System Code incorporated in this contract, Seller shall comply with the requirements of Section 2.0, titled Additional
More informationSUPPLIER QUALITY REQUIREMENTS
SUPPLIER QUALITY REQUIREMENTS Revision B January 2017 This document establishes general and special product assurance requirements clauses for use on the Purchase Order and is part of the Terms and Conditions
More informationSTANDARD QUALITY ASSURANCE PROVISIONS FOR PURCHASED MATERIALS
1. GOVERNMENT/CUSTOMER SOURCE INSPECTION: a. Government/Customer inspection is required prior to shipment from your plant. Upon receipt of this order, promptly notify the Government/Customer representative
More informationSupplier Quality Requirements Document (SQRD)
Supplier Quality Requirements Document (SQRD) D127135 Rev. AE Supplier Quality Requirements Document Page 2 of 8 1.0 SCOPE This document applies to all worldwide production suppliers of Coherent, Inc.
More informationSUPPLIER QUALITY MANUAL
Work Instruction Standard Locknut, LLC Supplier Quality Manual Doc. No. SQM-01 Page 1 of 11 Initial Date 11/1/2009 Rev. 4 Prepared By Dwight Beaty Revised By Shannon Smith Rev. Date 9/12/12 Approvals Purchasing
More informationRequirements for Suppliers
1.0 INTRODUCTION This document establishes requirements designed to ensure Park Engineering & Manufacturing Inc. (PEM) suppliers produce product that meets PEM s quality expectations and terms. Only suppliers
More informationQuality Management System
Quality Management System 6.1 Quality Q-Codes () 6.1 Quality Q-Codes Quality Clauses The following quality control clauses apply when specifically noted on the Gear Technology purchase order: Q1- Material
More informationSUPPLIER QUALITY ASSURANCE REQUIREMENTS - EMEA
SUPPLIER QUALITY ASSURANCE REQUIREMENTS - EMEA I. The following clauses are applicable to all purchase orders: 1. Quality Program Requirements The supplier shall provide and maintain a quality system that
More informationQUALITY DEPT request to have FORM 1135 for REVIEW/APPROVAL Cycle everytime form will be updated/revised.
REF ONLY-DATA MANAGEMENT: 1 ST (2) PAGES IS NOT PART OF FORM 1135. QUALITY DEPT request to have FORM 1135 for REVIEW/APPROVAL Cycle everytime form will be updated/revised. FORM 1135 QUALITY ASSURANCE CLAUSES
More informationQUALITY CONTROL INSTRUCTION
QUALITY CONTROL INSTRUCTION NUMBER QCI 103 REVISION N TITLE: Servotronics Inc. Quality Clauses PURPOSE: To establish a system to implement Servotronics & Customer flow down Quality Requirements to Servotronics
More informationTHE FOLLOWING GENERAL REQUIREMENTS APPLY ON ALL ORDERS
PROCUREMENT QUALITY ASSURANCE CLAUSES PAGE 1 OF 9 THE FOLLOWING GENERAL REQUIREMENTS APPLY ON ALL ORDERS A. Each certification document and report required shall be in the English language and identified
More informationSP SECTION QUALITY ASSURANCE
SP SECTION 2000 - QUALITY ASSURANCE SP 2000 SUBJECT: Inspection, Obligation. Standard Quality Clause. The Seller is responsible for performing or having performed all inspections and tests necessary to
More informationSUPPLIER QUALITY MANUAL
SUPPLIER QUALITY MANUAL Printed versions of this manual and other Kooltronic supplier documents shall be for reference only and shall be subject to change without notice. It is the responsibility of all
More informationQUALITY CLAUSE CODES
14201 Myerlake Circle 5307 Luce Avenue, Bldg 243E Clearwater, FL 33760 McClellan, CA 95652 P (727) 539-8585 F (727) 539-0316 THESE ARE IN ADDITION TO THOSE SET FORTH IN ANY DOCUMENT THAT IS PART OF THE
More informationSupplier Requirements Manual
ABACO-EQP-001 REV A Supplier Requirements Manual (European Edition) : Approved By Department Signatory Martin Edwards Quality A 13 TH Sep 2017 Martin Edwards Peter Rhodes Purchasing A 13 TH Sep 2017 Peter
More informationAssociation of American Railroads Quality Assurance System Evaluation (QASE) Checklist Rev. 1/12/2017
Company: Prepared By: Date: Changes from previous version highlighted in yellow. Paragraph Element Objective Evidence 2.1 Objective of Quality Assurance Program 2.2 Applicability and Scope 2.3 QA Program
More informationSelf-Audit Checklist
Page 1 Company Name: Date of audit: Date of last audit performed: Name of person performing self-audit: Signature: Name of person responsible for quality system: Signature: Page 2 Number of non-compliances:
More informationVendor / Sub-Contractor General Terms & Conditions
Vendor / Sub-Contractor General Terms & Conditions 1. The goods or services are to be delivered to our works or depots as ordered. They must be delivered in good order and condition and exactly in accordance
More informationMechanical & Electrical Product Workmanship Standards Procedure
Workmanship Standards Page: 1 of 14 Mechanical & Electrical Product Workmanship Standards Procedure Workmanship Standards Page: 2 of 14 1.0 PURPOSE AND SCOPE 1.1 Purpose 1.1.1 The purpose of this procedure
More informationSUPPLIER QUALITY REQUIREMENTS
PURPOSE This procedure defines the policy for the use of suppliers in the purchasing of products and services that affect product conformity. Purchased goods shall meet the requirements of our purchase
More informationSupplier Quality Requirements (SQR)
Supplier Quality Requirements (SQR) General Warmelin Precision Products, LLC (WPP) may refuse to accept materials and services delivered under a Purchase Order (PO) if the Seller fails to comply with the
More informationTERMS AND CONDITIONS. No charges are allowed for boxing, packing, crating, and insurance unless specifically provided for in the Purchase Order.
By acceptance of this attached Order, the Seller agrees to the following: 1. PAYMENT Unless otherwise specified in the purchase order, Buyer will make payments in U.S. Dollars within 30 days after receipt
More informationQUALITY MANUAL. Origination Date: XXXX. Latest Revision Date. Revision Orig
QUALITY MANUAL Origination Date: XXXX Document Identifier: Date: Document Status: Latest Revision Date Revision Orig Abstract: This document describes the tailored quality management system for the build
More information4. RELATED DOCUMENTS AND FORMS 4.1. AS ISO Cambridge Valley Machining, Inc. QMS procedures, including, but not limited to:
Approved By: Purchasing Manager Candice Lane (signature on file) Date: 5/26/17 Approved By: Process Owner James D. Moore (signature on file) Date: 5/26/17 1. PURPOSE 1.1. To define Cambridge Valley Machining,
More information1.0 Purpose. 2.0 General notes 3.0 QUALITY SYSTEM REQUIREMENTS. Approved by: G. Stugart Prepared by: Schelert
1.0 Purpose This document defines PECO-Astronics (PECO) purchased material flow-down requirements. Additional specifications may also apply and will be documented on the purchase order; all requirements
More informationSL - MONTEVIDEO TECHNOLOGY, INC.
The following codes apply when specified in SL-MTI s purchase order Q01: Minimum Quality Requirements: If this Purchase Order is for the acquisition of an article with an SL-MTI inventory part number,
More informationTT Electronics Integrated Manufacturing Services Supplement to Purchase Order Quality Clauses TT Electronics Purchase Order
Q01 Quality System Requirements The supplier shall establish and maintain a quality system that conforms to the requirements of ISO 9001:2008 or AS9100 current revision or previous revision prior to its
More informationAS 9100 Rev C Quality Systems Manual AS-050C-QM
AS 9100 Rev C Quality Systems Manual AS-050C-QM Innovative Control Systems, Inc. 10801 N. 24 th Ave. Suite 101-103 Phoenix, AZ 85029 U.S.A. www.icsaero.com +01-602-861-6984 VOICE +01-602-588-9440 FAX Table
More informationDefinitions contained in the above mentioned document and industry regulations are applicable herein.
Quality Specification TEC-1021 21May12 Rev E Global Quality Management System Supplement for Various International Nuclear Quality Assurance Criteria, Regulations, and Requirements 1. SCOPE 1.1. Content
More informationQuality Flow-Down Requirements to Suppliers
1.0 Calibration System: Seller s (herein referred to as Supplier) calibration system shall meet the requirements or standards of; ISO 9001, ISO 10012-1, or AS9100, and ANSI-Z540-1, or MIL-STD-45662. 2.0
More informationComparison ISO/TS (1999) to QS 9000, 3 rd edition (1998)
1 SCOPE QS 9000: new: Introduction, applicability In addition to the applicability for supplier sites for production and services and their subcontractors for: - parts or materials, or - services like
More informationAhlers Aerospace Quality Procedures Manual
Page 1 of 8 Purchase Order Quality for Suppliers/Vendors Issued: 08/11/1999 GENERAL INFORMATION This document establishes quality requirements as listed in each Quality Code for procurement items and/or
More informationISO 9001 PMA and 14 CFR 21 QUALITY POLICIES HANDBOOK
ISO 9001 PMA and 14 CFR 21 QUALITY POLICIES HANDBOOK Origination Date: XXXX Document Identifier: Date: Document Revision: QMS-00 QMS Quality Policies Handbook Latest Revision Date Orig Abstract: This quality
More informationPURCHASE ORDER QUALITY CLAUSES
By accepting a purchase contract from Alva Manufacturing, you are accepting responsibility for all quality clauses listed in the body of the Purchase Order as described below: SUPPLIER QUALITY CLAUSE SUMMARY
More informationALTA Precision Inc. Quality Procedure
ALTA Precision Inc. Quality Procedure Procedure QAP 7.4.2 Issue 7 Date September 28, 2015 Page 1 of 5 ALTA Quality Requirements for Suppliers Prepared and issued by Marc Dumouchel Approved by Sonia Alonso
More informationDefinitions contained in the above mentioned Specifications and Industry Standards are applicable herein.
1. SCOPE Quality Specification TEC-1019 12 Jul 11 Rev C All Paragraphs Revised Global Quality Management System Supplement for the Aerospace Industry Model, AS 9100 (C) 1.1. Content This specification
More informationKLINGE COATINGS. 3.1 Deviation A deviation addresses material, which has not been produced or has a known material substitution.
the latest, approved revision of this document please refer to the website (external) or master list (internal). Replaces: QP-06-200 Original issue date: May 22, 2003 1.0 PURPOSE 1.1 The Objective of this
More informationOverview of Draft API Standard 20M
Overview of Draft API Standard 20M Qualification of Suppliers of Machining Services for Use in the Petroleum and Natural Gas Industries API STANDARD 20M Slide 1 of 9 Overview Standard 20M provides methods
More informationCustomer Specific Requirements. Last Update 23July2015
Customer Specific Requirements Last Update 23July2015 A17 A. In performing the obligations of this Agreement, both Parties will comply with United States export control and sanctions laws, regulations,
More information2.1 This work instruction will apply to all Suppliers, Engineering, Planning, Maintenance, Manufacturing, Supply Chain and Purchasing.
Approval: Doc ID: PG-WI-003 Page: 1 of 7 1. Purpose 1.1 The purpose of this work instruction is to provide each supplier with a clear understanding of all requirements to supply products and services to
More informationSL - MONTEVIDEO TECHNOLOGY, INC.
The following codes apply when specified in SL-MTI s purchase order Q01: Minimum Quality Requirements: If this Purchase Order is for the acquisition of an article with an SL-MTI inventory part number,
More informationGeneral Requirements for all External Providers
1. Quality System Requirements Unless otherwise designated, suppliers shall maintain a Quality Management System (QMS) suitable to the products and services provided to FCP. The system shall be certified
More informationPurchase Order and Quality Clauses
Purchase Order Clauses P01) DELIVERY PAPERWORK - shipments are to include all material traceability, packing sheets, certifications and test reports when the shipment arrives on our dock. Tech Manufacturing
More informationQSS 0 Products and Services without Bespoke Contracts.
QSS 0 Products and Services without Bespoke Contracts. Use: Typically Sub 50k processes without a bespoke contract. Amendment History Version Date Status V3 June 2018 Updated for 2018 deployment Contents
More information(A.2) DURING PERFORMANCE OF THIS ORDER, YOUR QUALITY CONTROL SYSTEMS AND MANUFACTURING PROCESS ARE SUBJECT TO REVIEW, VERIFICATION,
(A) GENERAL: (A.1) GENERAL ELECTRIC (GE) IS THE END USER. (A.2) DURING PERFORMANCE OF THIS ORDER, YOUR QUALITY CONTROL SYSTEMS AND MANUFACTURING PROCESS ARE SUBJECT TO REVIEW, VERIFICATION, ANALYSIS, AND
More informationHM Dunn AeroSystems Purchase Order Quality Clauses
HM Dunn AeroSystems Purchase Order Quality Clauses applies to all divisions of HM Dunn AeroSystems, which include Apex Engineering International (AEI) and HM Dunn Companies. Approved Processing Sources
More informationLM Logistic Services Quality Notes Conversion Chart
Page 1 of 10 LM Logistic Services s Conversion Chart The latest issue to this document is the version that is available on the Lockheed Martin Logistic Services Supplier Management website: http://www.lockheedmartin.com/us/suppliers/bu-info/aeronautics/sustainment-services.html
More informationPurchase Order Quality Clause SCC40 Revision G, Effective 1/20/2015
Clause A - Quality System Requirements All references to the term Government in any of the documents referenced below shall be replaced with the term Curtiss-Wright and/or the Government. All references
More informationQUALITY ASSURANCE PROCEDURE: SUPPLIER QUALITY REQUIREMENTS
Originator: RCG Page 1 of 6 1. PURPOSE This document defines minimum quality requirements for suppliers of products or processes to Whelen Engineering Company, Inc. ( Whelen ), when the products or processes
More informationI. Development, Submittal, and Acceptance of a Quality Management System
I. Development, Submittal, and Acceptance of a Quality Management System 1. Scope Under the Contract, quality assurance and quality control management are the responsibility of the Contractor. The Contractor
More information