The Wrapper Experts! 220 Bayview Drive, Unit 16

Transcription

1 The Wrapper Experts! 220 Bayview Drive, Unit 16 Barrie, ON L4N 4Y8 Canada Tel: Fax: Request For Quotation - Stretchwrapper Toll Free: GENERAL INFORMATION - Completion of this questionnaire is required for engineering to provide an accurate quotation. - Specifications set forth in this document will be the standard for the design of the system. - Please complete this document with as much detail as possible to ensure a timely and accurate response. Company: Address: Contact: Phone Number: ( ) Fax Number: ( ) Address: Method of quote delivery: Fax Courier Other Other: Type of quotation needed: Firm quote needed for approved/budgeted project (ready to purchase). For budget application only (no approved funds for project). Projected system purchase date: 2. PRODUCTION INFORMATION A. Maximum Production Speed: Normal Peak Future B. Maximum Production Speed based on Load Height. C. Number of Shifts Per Day: D. Days per Week: E. Model or equipment desired: 3. PRODUCT INFORMATION A. Products to be wrapped: B. Product description: Boxes Bags Drums Trays Other: C. Smallest individual package dimensions: " Length x " Width x " Height x lbs. Weight D. Product colors: (dark loads or loads with condensation require special sensing devices) PPARFQv1 pg 1 of 7

2 4. LOAD INFORMATION A. Unwrapped loads : Stable Unstable B. Stacking pattern: Column stacked Interlocked Double stacked Other: C. Is load stacked evenly? Yes No If no, explain: D. Is anything unusual about the product or stacking pattern? Yes No If yes, explain: E. Method of palletizing: Automatic Manual F. Describe each type of load below. If there are more than 7 types, please attach an additional sheet to describe each load. Note: Sizes are to be of actual load, not size of pallet. 1. L (in.) W (in.) H (in.) Weight Max. Max inboard Percent (along (across (includes overhang of pallet of total conveyor) conveyor) pallet) (lbs.) (in.) (in.) Production Note: When determining load sizes, it is important to verify that given dimensions include any load imperfections. I.e. Loads that are staggered or leaning Misplaced cases The above dimensions must be for the overall load, not just the pallet its self or a single layer G. Load Heights: Minimum Maximum H. Load Weights: Minimum Maximum PPARFQv1 pg 2 of 7

3 5. SYSTEM CONFIGURATION A. Indicate the by darkening the appropriate ovals. B. Darken the circle corresponding to each conveyor section to be supplied. C. Darken the square corresponding to each forklift loading or unloading location. ROTARY TURNTABLE film carriage OCTOPUS / ROTARY ARM hom e position NOTE: The customer is responsible for the control logic of conveyors not supplied by PPA. As an option, PPA can provide control packages at an additional cost. The standard PPA system includes interlock relays for interfacing with customer's upstream and downstream conveyors at no charge. PPARFQv1 pg 3 of 7

4 6. MATERIAL HANDLING EQUIPMENT Forklift Manual hand jack Powered hand jack Clamp truck Push pull Dual forklift Other: 7. LOAD SUPPORT On pallet only On slipsheet only On pallet with slipsheet Palletless (no slipsheet or pallet) 8. PALLET INFORMATION: A. Indicate the type of pallet that will be used. FOUR-WAY PALLET TWO-WAY PALLET height height width width length length B. Pallet dimensions: i) Length (in.) Width (in.) Height (in.) ii) Length (in.) Width (in.) Height (in.) iii) Length (in.) Width (in.) Height (in.) NOTE: Use additional paper if more than three types or size pallets are used. C. Do the bottom pallet boards run parallel or perpendicular to the conveyor rollers? D. Width of bottom pallet boards (in.) Number of bottom pallet boards PPARFQv1 pg 4 of 7

5 9. CONVEYOR DETAILS A. Will a conveyor be connected to the first supplied infeed conveyor? Yes No B. Will a conveyor be connected to the last supplied outfeed conveyor? Yes No C. Required conveyor speed? (Ft/Min) NOTE: Standard conveyor speed is 30 FPM. For high speed applications 45 or 60 FPM is recommended to reduce transfer time. D. Required conveyor pass height (in.) NOTE: Standard pass height is 20" for turntable models and 18" for most others. top of rollers to floor 10. SLIPSHEET INFORMATION: (Optional) A. Length (not including tabs): Maximum (in.) Minimum (in.) B. Width (not including tabs): Maximum (in.) Minimum (in.) C. Tab width: (in.) Are the tabs to be wrapped? Yes No D. Are the tabs already folded when the load reaches the wrap zone? Yes No E. If the tabs are to be folded, please attach a drawing showing the number and The location of the tabs with an arrow indicating the. 11. ENVIRONMENTAL FACTORS A. Available ceiling height (in.) B. Ambient operating temperatures: Minimum F Maximum F C. Is the environment: Corrosive Explosive Spill prone Washdown None of the above 12. WRAPPING PARAMETERS A. Is the pallet included in the wrap? Yes No B. How close to the conveyor surface should the film be? (in.) NOTE: Dependent on conveyor type, the Octopus can wrap to within 1-1/2" from conveyor surface, rotary arm machines can wrap to within 2-1/2", and turntable machines can wrap to within 1". C. Number of top wraps Number of bottom wraps NOTE: The number of top (std = 2) and bottom (std = 2) wraps can be changed. The above numbers will be used to calculate the maximum production capacity of the machine. D. Amount of film overwrap at top of load (in.) (std = 4") E. Diameter of film roll (10" maximum) (in.) PPARFQv1 pg 5 of 7

6 13. FILM INFORMATION A. Film manufacturer: B. Film Type/Model #: C. Film gauge: D. Prestretch Ratio: 150% 175% 200% 225% 250% 300% Other required: % NOTE: Machines ship with 225% as standard. 14. OPTIONS A. Film carriage: 20" (standard) 30" (optional) Pak-Air (20") B. Electrical service available (or preferred machine voltage): 575 VAC, 3Ø 480 VAC, 3Ø 230 VAC, 3Ø 240 VAC, 1Ø 120 VAC, 1Ø Other: VAC, Ø NOTE: Standard machine voltage is 240 single phase. C. Special paint (or color): Yes No Description: D. Top sheet dispenser: Yes No Special requirements? Top sheet type: Corrugated Poly film Other: E. Top Platen : Yes No If a Top Platen or a Top Sheet Dispenser is required, please answer the next three questions. i) Are load heights varied? Yes No If yes, Maximum (in.) Minimum (in.) ii) Top layer description: Full Partial Level Uneven Are there see through voids? Yes No iii) Please sketch an overhead view of the top layer configuration: PPARFQv1 pg 6 of 7

7 Please list any specifications or requirements not addressed in this questionnaire: Please supply any other pertinent documentation such as: System layout Plant layout Product info Custom specs Digital pictures Other, please describe: Supplied via: Attached Fax Courier Other: Approval Drawings to be forwarded to: Address: Will the system be inspected at the factory before it is shipped? Yes No DELIVERY: Not to be delivered before:. Not to be delivered after:. Your signature is required and assures that this information is correct and will be the reference for the quotation, design, and manufacture of your system. The building of your machine may begin immediately upon receipt of your P.O. and this questionnaire. Any changes requested after such time, such as a change in the, may be subject to an upcharge. If this questionnaire is being submitted to obtain a quotation, you are under no obligation to purchase until a P.O. has been issued to Post Production Automation (PPA). Customer's Signature: Title: PPARFQv1 pg 7 of 7