ROAD TRANSPORT OPERATIONS Manage the transport of overdimension and overweight loads by road

Size: px
Start display at page:

Download "ROAD TRANSPORT OPERATIONS Manage the transport of overdimension and overweight loads by road"

Transcription

1 1 of 7 level: 5 credit: 10 planned review date: July 2009 sub-field: purpose: Commercial Road Transport This unit standard is intended for people who are involved with managing the despatch and/or supervision of overdimension. People credited with this unit standard are able to: describe requirements of the Rule for the transportation of overdimension and overweight loads; describe other formal requirements for the transportation of overdimension and overweight loads; determine vehicle, accessories, and load configuration for a specified overdimension and/or overweight load; determine route and time of travel for road transport of specified overdimension and/or overweight load; obtain formal consents for transporting a specified overdimension and/or overweight load or vehicle; and brief driver for transporting a specified overdimension and/or overweight load. entry information: accreditation option: moderation option: Open. Evaluation of documentation and visit by NZQA and industry. A centrally established and directed national moderation system has been set up by the NZ Motor Industry Training Organisation (Incorporated). special notes: 1 Legal and other formal requirements to be complied with include: Land Transport Act 1998; Land Transport Rule: Vehicle Dimensions and Mass 2002;

2 2 of 7 Bridge Engineering Self Supervision (BESS), contained in the Transit New Zealand Overweight Permit Manual; Transit New Zealand Overweight Permit Manual (SP/M:OPM) First Edition 1995, Transit New Zealand; Code of Practice for Traffic Control at Bridges being crossed by Overweight Vehicles, 1999, New Zealand Heavy Haulage Association and the New Zealand Power Crane Association; The Official New Zealand Truck Loading Code: Code of Practice for The Safety of Loads on Heavy Vehicles, (current edition), available from booksellers. This is expected to be replaced in 2006 by Rule 42001: Heavyvehicle Load Security; Load Pilot Driver Code, Land Transport New Zealand 2004; Overdimension Vehicle Route Maps (SP/M/017) Issue 1, Transit New Zealand, September 2002; Overweight Permit Route Maps (SP/M/032) Version 2, Transit New Zealand, 2004; Road controlling authority by-laws. 2 Any new, amended or replacement Acts, regulations, Rules, standards, codes of practice, or Land Transport New Zealand or Transit New Zealand or road controlling authority requirements or conditions affecting this unit standard will take precedence for assessment purposes, pending review of this unit standard. 3 Definitions The Code is The Official New Zealand Truck Loading Code: Code of Practice for The Safety of Loads on Heavy Vehicles. Organisational requirements include any legal requirements, standards, codes of practice, organisational and/or site requirements, industry best practices, and manufacturers instructions. These must be available to candidates, providers, and assessors. Particular features of a load include projections (horizontal or vertical), overhangs offset centre of gravity, and load stability.

3 3 of 7 Road layout includes but not limited to width, camber, gradient, surface, horizontal and vertical curvature. The Rule is Land Transport Rule: Vehicle Dimensions and Mass A vehicle may be a single vehicle or a combination vehicle. Elements and Performance Criteria element 1 Describe requirements of the Rule for the transportation of overdimension and overweight loads. 1.1 The description includes when a permit is required. overweight vehicle, overdimension vehicle. 1.2 The description includes those vehicles to which Section 6 of the Rule applies and the dimension requirements for those vehicles. 1.3 The description includes dimensions of overdimension loads which may be carried. standard vehicle, specialist overdimension vehicle, vehicle designed primarily to transport overdimension and overweight loads. 1.4 The description includes general operating requirements for overdimension vehicles. 1.5 The description includes the appropriate operating requirements for overdimension vehicles. hazard warning flags and panels, OVERSIZE signs, travel times, piloting.

4 4 of 7 element 2 Describe other formal requirements for the transportation of overdimension and overweight loads. 2.1 The description includes the requirements of Transit New Zealand s Overweight Permit Manual The description includes the formal requirements of organisations whose services may be disrupted by the transport of overdimension and overweight loads. road controlling authorities, power companies, telecommunications companies, rail companies. 2.3 The description includes formal requirements for bridge self-supervision and traffic management at bridges. 2.4 The description includes piloting requirements for transportation of overdimension loads. 2.5 The description includes organisational requirements for the transport of overdimension and/or overweight loads. element 3 Determine vehicle, accessories, and load configuration for a specified overdimension and/or overweight load. 3.1 Load characteristics are identified in terms of weight, dimensions, and any particular features which may create difficulties during transportation. 3.2 Vehicle selected meets the requirements of the load to be carried in terms of weight, dimensions, and particular features identified in Load configuration on selected vehicle complies with legal and organisational requirements.

5 5 of Accessories required for transporting the load safely are identified. includes but is not limited to signs, lights, flags, securing devices, blocks. element 4 Determine route and time of travel for road transport of specified overdimension and/or overweight load. 4.1 Restrictions on two alternative routes are identified in terms of possible hazards. hazards include but are not limited to road layout, bridges, overhead wires, rail crossings, trees, poles, signposts, parked vehicles, roundabouts, traffic islands, road works, other overdimension loads. 4.2 Methods of determining preferred route for load are described in terms of weight and size of load and restrictions on routes. includes but is not limited to Route Maps. element 5 Obtain formal consents for transporting a specified overdimension and/or overweight load or vehicle. 5.1 Application form(s) is/are completed accurately and in full. overweight permit and/or overdimension permit.

6 6 of Formal requirements of utility and service providers are obtained as required before load commences the journey. may include but is not limited to road controlling authorities, power companies, telecommunications companies, rail companies. element 6 Brief driver for transporting a specified overdimension and/or overweight load. 6.1 Driver is briefed in accordance with job requirements. includes but is not limited to documentation relating to the load, person managing the movement, list of accessories, load configuration, route plan, requirements of utility and service providers, details for on-site meeting of appropriate parties, copies of permits and formal consents, special instructions (if any). Comments on this unit standard Please contact the NZ Motor Industry Training Organisation (Incorporated) info@mito.org.nz if you wish to suggest changes to the content of this unit standard. Please Note Providers must be accredited by the Qualifications Authority or a delegated interinstitutional body before they can register credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be accredited by the Qualifications Authority before they can register credits from assessment against unit standards. Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards.

7 7 of 7 Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for providers wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. This unit standard is covered by AMAP 0092 which can be accessed at

NZQA registered unit standard version 2 Page 1 of 7. Title Pilot an overweight load and an overdimension load as a Class 1 certified pilot

NZQA registered unit standard version 2 Page 1 of 7. Title Pilot an overweight load and an overdimension load as a Class 1 certified pilot Page 1 of 7 Title Pilot an overweight load and an overdimension load as a Class 1 certified pilot Level 5 Credits 10 Purpose This unit standard is for people acting as a Class 1 certified pilot for the

More information

GOODS SERVICE Operate a truck mounted sidelifter

GOODS SERVICE Operate a truck mounted sidelifter 1 of 6 level: 3 credit: 6 planned review date: March 2009 sub-field: purpose: entry information: accreditation option: moderation option: Commercial Road Transport People credited with this unit standard

More information

GOODS SERVICE Transport vehicles by road transporter

GOODS SERVICE Transport vehicles by road transporter 1 of 5 level: 4 credit: 3 planned review date: March 2009 sub-field: purpose: Commercial Road Transport This unit standard is for drivers of road haulage vehicles carrying vehicles. People credited with

More information

NZQA registered unit standard 1768 version 5 Page 1 of 6. Title Pilot an overweight load and an overdimension load as a Class 2 certified pilot

NZQA registered unit standard 1768 version 5 Page 1 of 6. Title Pilot an overweight load and an overdimension load as a Class 2 certified pilot Page 1 of 6 Title Pilot an overweight load and an overdimension load as a Class 2 certified pilot Level 4 Credits 10 Purpose This unit standard is for people acting as a Class 2 certified pilot for the

More information

Transport horses by road

Transport horses by road Page 1 of 5 Transport horses by road Level 4 Credits 25 Purpose This unit standard is for drivers of road transport vehicles carrying horses. People credited with this unit standard are able to: describe

More information

GOODS SERVICE Transport bulk dry goods by heavy motor vehicle

GOODS SERVICE Transport bulk dry goods by heavy motor vehicle 1 of 7 level: 3 credit: 6 planned review date: March 2009 sub-field: purpose: entry information: accreditation option: moderation option: Commercial Road Transport People credited with this unit standard

More information

Manage the transportation of hazardous substances by road

Manage the transportation of hazardous substances by road Manage the transportation of hazardous substances by road Page 1 of 5 Level 6 Credits 10 Purpose This unit standard is for carriers of goods service vehicles carrying hazardous substances. People credited

More information

Transport perishable products by road

Transport perishable products by road Page 1 of 5 Transport perishable products by road Level 4 Credits 25 Purpose This unit standard is for those who drive, or intend to drive, road transport vehicles transporting perishable products. People

More information

Meet Approved Handler requirements for the transport of bulk hazardous substances by road

Meet Approved Handler requirements for the transport of bulk hazardous substances by road Meet Approved Handler requirements for the transport of bulk hazardous substances by road 25986 version 1 Page 1 of 5 Level 4 Credits 6 Purpose This unit standard is for the drivers of road transport vehicles

More information

PUBLIC SECTOR SERVICE DELIVERY Establish client needs and gain agreement on requirements for public sector service delivery

PUBLIC SECTOR SERVICE DELIVERY Establish client needs and gain agreement on requirements for public sector service delivery 1 of 5 level: 6 credit: 15 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard

More information

NZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of costs to the pricing of a road transport service

NZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of costs to the pricing of a road transport service Page 1 of 5 Title Demonstrate and apply knowledge of costs to the pricing of a road transport service Level 5 Credits 7 Purpose This unit standard is intended for people who are required to prepare quotes

More information

NZQA registered unit standard version 3 Page 1 of 5

NZQA registered unit standard version 3 Page 1 of 5 Page 1 of 5 Title Apply occupational health and safety requirements in the road transport and logistics industry Level 5 Credits 8 Purpose This unit standard is designed for team leaders, despatchers,

More information

NZQA registered unit standard version 1 Page 1 of 5. Identify and inspect road safety barrier systems on Infrastructure Works sites

NZQA registered unit standard version 1 Page 1 of 5. Identify and inspect road safety barrier systems on Infrastructure Works sites Page 1 of 5 Title Identify and inspect road safety barrier systems on Infrastructure Works sites Level 4 Credits 10 Purpose People credited with this unit standard are able to: identify and explain road

More information

PUBLIC SECTOR SERVICE DELIVERY Develop public sector service delivery objectives, and implement systems to meet client needs

PUBLIC SECTOR SERVICE DELIVERY Develop public sector service delivery objectives, and implement systems to meet client needs 1 of 5 level: 7 credit: 20 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard

More information

LOGISTICS OPERATIONS Plan distribution centre structure and equipment for a logistics operation

LOGISTICS OPERATIONS Plan distribution centre structure and equipment for a logistics operation 1 of 5 level: 5 credit: 8 planned review date: February 2004 sub-field: purpose: entry information: accreditation option: moderation option: Logistics People credited with this unit standard are able to:

More information

Describe practices to maintain the quality of perishable products during transport by road

Describe practices to maintain the quality of perishable products during transport by road Page 1 of 5 Describe practices to maintain the quality of perishable products during transport by road Level 3 Credits 5 Purpose This unit standard is for those who drive, or intend to drive, road transport

More information

Carry out off-road motorcycle training

Carry out off-road motorcycle training Page 1 of 5 Carry out off-road motorcycle training Level 5 Credits 10 Purpose People credited with this unit standard are able to: prepare for a training session in riding motorcycles off-road; conduct

More information

VEHICLE BODYWORK Mask a repair for priming; and prime, fill, and sand a repair in the motor body industry

VEHICLE BODYWORK Mask a repair for priming; and prime, fill, and sand a repair in the motor body industry 1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21703 replaced unit standard 3868 and unit standard

More information

Establish quality requirements, manage, and monitor the installation of subdivision infrastructure

Establish quality requirements, manage, and monitor the installation of subdivision infrastructure Page 1 of 5 Establish quality requirements, manage, and monitor the installation of subdivision infrastructure Level 6 Credits 18 Purpose This unit standard is for people who are working, or who intend

More information

Trim and limb shelter belts

Trim and limb shelter belts Page 1 of 5 Trim and limb shelter belts Level 4 Credits 10 Purpose People credited with this unit standard are able to: select and prepare trimming and limbing equipment and machinery; carry out field

More information

DEMOLITION Operate a hydraulic excavator on demolition sites

DEMOLITION Operate a hydraulic excavator on demolition sites 1 of 7 level: 3 credit: 25 planned review date: November 2007 sub-field: purpose: entry information: accreditation option: moderation option: Civil Works and Services People credited with this unit standard

More information

Transport bulk gases by road

Transport bulk gases by road Page 1 of 9 Transport bulk gases by road Level 4 Credits 15 Purpose This unit standard is for drivers of road tank wagons who load, transport and unload bulk gases under pressure, including hazardous and

More information

Plan and manage helicopter overhead lines operation

Plan and manage helicopter overhead lines operation Page 1 of 5 Plan and manage helicopter overhead lines operation Level 5 Credits 10 Purpose People credited with this unit standard are able, for helicopter overhead lines operations, to: plan; organise

More information

Carry out routine maintenance on automotive automatic transmissions

Carry out routine maintenance on automotive automatic transmissions Page 1 of 5 Carry out routine maintenance on automotive automatic transmissions Level 3 Credits 4 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit

More information

Demonstrate knowledge of servicing automotive air conditioning systems

Demonstrate knowledge of servicing automotive air conditioning systems Demonstrate knowledge of servicing automotive air conditioning systems 24448 version 1 Page 1 of 5 Level 3 Credits 2 Purpose This theory-based unit standard is for people in the automotive repair industry.

More information

Prepare a schedule of quantities, cost estimate and tender documentation for landscape work

Prepare a schedule of quantities, cost estimate and tender documentation for landscape work Page 1 of 5 Prepare a schedule of quantities, cost estimate and tender documentation for landscape work Level 5 Credits 15 Purpose This unit standard is for people working, or intending to work, in landscaping.

More information

VEHICLE BODYWORK Detail and groom a vehicle

VEHICLE BODYWORK Detail and groom a vehicle 1 of 5 level: 2 credit: 4 planned review date: December 2009 sub-field: purpose: entry information: accreditation option: moderation option: Motor Industry People credited with this unit standard are able

More information

PUBLIC SECTOR COMPLIANCE MANAGEMENT Audit quality management systems for compliance with weights and measures legislation

PUBLIC SECTOR COMPLIANCE MANAGEMENT Audit quality management systems for compliance with weights and measures legislation 1 of 6 level: 6 credit: 13 planned review date: December 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard

More information

Instruct a programme using low ropes course activities

Instruct a programme using low ropes course activities Page 1 of 5 Instruct a programme using low ropes course activities Level 5 Credits 5 Purpose People credited with this unit standard are able to: prepare for instructing low ropes course activities; instruct

More information

AUTOMOTIVE WORKSHOP ENGINEERING Use an oxy-acetylene welding plant in the motor industry

AUTOMOTIVE WORKSHOP ENGINEERING Use an oxy-acetylene welding plant in the motor industry 1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21682 replaced unit standard 230 and unit standard 3885.

More information

NZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident

NZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Page 1 of 5 Title Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: the interrelated

More information

NZQA registered unit standard version 4 Page 1 of 5. Operate power-operated elevating work platforms (EWP) in an electricity supply environment

NZQA registered unit standard version 4 Page 1 of 5. Operate power-operated elevating work platforms (EWP) in an electricity supply environment Page 1 of 5 Title Operate power-operated elevating work platforms (EWP) in an electricity supply environment Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge

More information

NZQA registered unit standard 9537 version 5 Page 1 of 6. This unit standard applies to operational activities carried out on producing wellheads.

NZQA registered unit standard 9537 version 5 Page 1 of 6. This unit standard applies to operational activities carried out on producing wellheads. Page 1 of 6 Title Replace faulty petrochemical wellhead equipment Level 4 Credits 8 Purpose This unit standard applies to operational activities carried out on producing wellheads. People credited with

More information

Operate a diesel-mechanical/hydraulic railcar/multiple unit on a main line managed by a network operator

Operate a diesel-mechanical/hydraulic railcar/multiple unit on a main line managed by a network operator Page 1 of 5 Operate a diesel-mechanical/hydraulic railcar/multiple unit on a main line managed by a network operator Level 4 Credits 10 Purpose People credited with this unit standard are able to: prepare

More information

Demonstrate the requirements for holding permits on high voltage electrical equipment

Demonstrate the requirements for holding permits on high voltage electrical equipment Page 1 of 6 Demonstrate the requirements for holding permits on high voltage electrical equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: describe the requirements

More information

SECURITY STAFF SERVICES Demonstrate knowledge of and operate electronic equipment as a security officer

SECURITY STAFF SERVICES Demonstrate knowledge of and operate electronic equipment as a security officer 1 of 5 level: 3 credit: 5 planned review date: March 2007 sub-field: purpose: Security This unit standard covers the use of electronic equipment for security s. People credited with this unit standard

More information

ELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and servicing on high voltage minimum oil circuit breakers

ELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and servicing on high voltage minimum oil circuit breakers 1 of 9 level: 4 credit: 6 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for inspection, testing

More information

AUTOMOTIVE WORKSHOP ENGINEERING Demonstrate good work habits and perform safe work practices in the motor and related industries

AUTOMOTIVE WORKSHOP ENGINEERING Demonstrate good work habits and perform safe work practices in the motor and related industries 1 of 6 level: 2 credit: 4 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard replaced unit standard 226 and unit standard 16098. purpose: entry information:

More information

CONSTRUCTION HEALTH AND SAFETY, AND INJURY PREVENTION Prevent hazards when working with cranes, lifting appliances and rigging on construction sites

CONSTRUCTION HEALTH AND SAFETY, AND INJURY PREVENTION Prevent hazards when working with cranes, lifting appliances and rigging on construction sites 1 of 7 level: 4 credit: 4 planned review date: December 2003 sub-field: purpose: Construction People credited with this unit standard are able to: identify different types of rigging and lifting work for

More information

NZQA registered unit standard version 1 Page 1 of 5. Determine and describe construction of medium and large buildings

NZQA registered unit standard version 1 Page 1 of 5. Determine and describe construction of medium and large buildings Page 1 of 5 Title Determine and describe construction of medium and large buildings Level 6 Credits 20 Purpose People credited with this unit standard are able to, for medium and large buildings, determine

More information

NZQA registered unit standard 9536 version 5 Page 1 of 6. Undertake petrochemical wellhead maintenance activities under supervision

NZQA registered unit standard 9536 version 5 Page 1 of 6. Undertake petrochemical wellhead maintenance activities under supervision Page 1 of 6 Title Undertake petrochemical wellhead maintenance activities under supervision Level 3 Credits 4 Purpose This unit standard applies to operational activities carried out on producing wellheads.

More information

Measure and prune trees around electricity lines for vegetation control to minimum approach distance

Measure and prune trees around electricity lines for vegetation control to minimum approach distance Page 1 of 5 Measure and prune trees around electricity lines for vegetation control to minimum approach distance Level 4 Credits 8 Purpose People credited with this unit standard are able to: select tree

More information

ELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and service on oil filled distribution power transformers 11kV to 400V

ELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and service on oil filled distribution power transformers 11kV to 400V 1 of 8 level: 4 credit: 8 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for routine service transformers

More information

Remove and repair perforated non-structural body panel corrosion damage

Remove and repair perforated non-structural body panel corrosion damage Page 1 of 5 Remove and repair perforated non-structural body panel corrosion damage Level 3 Credits 3 Purpose This unit standard is for people who work in the motor body industry. People credited with

More information

NZQA registered unit standard 1512 version 8 Page 1 of 6

NZQA registered unit standard 1512 version 8 Page 1 of 6 Page 1 of 6 Title Supervise asphalt paving construction activities Level 4 Credits 18 Purpose This unit standard is designed for people working in the pavement surfacing industry, towards recognition of

More information

NZQA registered unit standard version 3 Page 1 of 5. Install high voltage (HV) electricity network overhead conductors

NZQA registered unit standard version 3 Page 1 of 5. Install high voltage (HV) electricity network overhead conductors Page 1 of 5 Title Install high voltage (HV) electricity network overhead conductors Level 4 Credits 8 Purpose People credited with this unit standard are able to: interpret scope of work for installing

More information

LEATHER - CUTTING AND CLOSING Perform specialist footwear closing operations

LEATHER - CUTTING AND CLOSING Perform specialist footwear closing operations 1 of 5 level: 2 credit: 9 planned review date: November 2005 sub-field: purpose: entry information: accreditation option: moderation option: special notes: Footwear and Leather Trades People credited with

More information

NZQA registered unit standard version 1 Page 1 of 5. Diagnose and repair faulty electronic equipment to component level

NZQA registered unit standard version 1 Page 1 of 5. Diagnose and repair faulty electronic equipment to component level Page 1 of 5 Title Diagnose and repair faulty electronic equipment to component level Level 4 Credits 40 Purpose This unit standard is intended for electronics technicians who are responsible for the diagnosis

More information

NZQA registered unit standard version 4 Page 1 of 5. Carry out switching operations on metal clad switchgear

NZQA registered unit standard version 4 Page 1 of 5. Carry out switching operations on metal clad switchgear Page 1 of 5 Title Carry out switching operations on metal clad switchgear Level 4 Credits 3 Purpose People credited with this unit standard are able to: demonstrate knowledge of metal clad switchgear,

More information

Apply earths to and remove earths from electrical conductors, plant and equipment

Apply earths to and remove earths from electrical conductors, plant and equipment Page 1 of 5 Apply earths to and remove earths from electrical conductors, plant and equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: demonstrate knowledge of earthing

More information

Operate a root crop harvester

Operate a root crop harvester Page 1 of 5 Operate a root crop harvester Level 4 Credits 20 Purpose People credited with this unit standard are able to: select and prepare root crop harvesting equipment and machinery; carry out field

More information

NZQA registered unit standard version 4 Page 1 of 5

NZQA registered unit standard version 4 Page 1 of 5 Page 1 of 5 Title Demonstrate the requirements for holding access permits for work on high voltage electrical lines, cables, and equipment Level 3 Credits 4 Purpose People credited with this unit standard

More information

Maximise timber recovery

Maximise timber recovery Page 1 of 6 Maximise timber recovery Level 5 Credits 25 Purpose People credited with this unit standard are able to: manage safety when maximising timber recovery; compare log supply with log specification;

More information

Install and commission high voltage (HV) electricity current transformer metering

Install and commission high voltage (HV) electricity current transformer metering Page 1 of 5 Install and commission high voltage (HV) electricity current transformer metering Level 4 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of the

More information

NZQA Expiring unit standard 1508 version 8 Page 1 of 7. Plan and organise construction activities as an asphalt paving supervisor

NZQA Expiring unit standard 1508 version 8 Page 1 of 7. Plan and organise construction activities as an asphalt paving supervisor Page 1 of 7 Title Plan and organise construction activities as an asphalt paving supervisor Level 4 Credits 15 Purpose This unit standard is designed for people working, in the pavement surfacing industry,

More information

NZQA registered unit standard version 4 Page 1 of 5. Forestry > Tree Felling

NZQA registered unit standard version 4 Page 1 of 5. Forestry > Tree Felling Page 1 of 5 Title Fell trees safely using a chainsaw Level 3 Credits 10 Purpose People completing this unit standard will have the skills required to safely fell individual trees using basic techniques.

More information

Demonstrate an advanced knowledge of railway signals

Demonstrate an advanced knowledge of railway signals Page 1 of 5 Demonstrate an advanced knowledge of railway signals Level 4 Credits 15 Purpose People credited with this unit standard are able to: demonstrate an advanced knowledge of fixed railway signals,

More information

NZQA registered unit standard version 1 Page 1 of 5. Develop, implement and review a HACCP application for a food processing operation

NZQA registered unit standard version 1 Page 1 of 5. Develop, implement and review a HACCP application for a food processing operation Page 1 of 5 Title Develop, implement and review a HACCP application for a food processing operation Level 5 Credits 20 Purpose This unit standard is for experienced people required to have in-depth knowledge

More information

POULTRY MANAGEMENT Manage hatchery operations

POULTRY MANAGEMENT Manage hatchery operations 1 of 5 level: 4 credit: 32 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Poultry Production People credited with this unit standard

More information

NZQA registered unit standard version 4 Page 1 of 5

NZQA registered unit standard version 4 Page 1 of 5 Page 1 of 5 Title Describe drinking-water supply reticulation systems Level 5 Credits 8 Purpose People credited with this unit standard are able to describe: the reticulated services found on public and

More information

Control pests by fumigation in the urban pest management industry

Control pests by fumigation in the urban pest management industry Page 1 of 5 Control pests by fumigation in the urban pest management industry Level 4 Credits 15 Purpose This is a specialist unit standard for people training for the urban pest management industry. People

More information

NZQA registered unit standard version 2 Page 1 of 5. Use a mini-crawler crane with outriggers to lift and place regular loads

NZQA registered unit standard version 2 Page 1 of 5. Use a mini-crawler crane with outriggers to lift and place regular loads Page 1 of 5 Title Use a mini-crawler crane with outriggers to lift and place regular loads Level 3 Credits 15 Purpose People credited with this unit standard are able to: prepare to lift and place regular

More information

Assist press operator on a reel-fed printing press

Assist press operator on a reel-fed printing press Page 1 of 5 Assist press operator on a reel-fed printing press Level 2 Credits 12 Purpose People credited with this unit standard are able to: follow safety requirements for the press being used; check

More information

NZQA registered unit standard version 3 Page 1 of 5. Infrastructure Works > Civil Plant Operation

NZQA registered unit standard version 3 Page 1 of 5. Infrastructure Works > Civil Plant Operation Page 1 of 5 Title Operate a motor grader for earthworks Level 3 Credits 20 Purpose People credited with this unit standard are able to: prepare for grader operations; manoeuvre and control grader on site;

More information

LEATHER - BOTTOM STOCK, MAKING AND LASTING Clean, dress, and spray footwear in a shoe room

LEATHER - BOTTOM STOCK, MAKING AND LASTING Clean, dress, and spray footwear in a shoe room 1 of 6 level: 3 credit: 18 planned review date: November 2005 sub-field: purpose: entry information: accreditation option: moderation option: special notes: Footwear and Leather Trades People credited

More information

NZQA registered unit standard version 4 Page 1 of 5

NZQA registered unit standard version 4 Page 1 of 5 Page 1 of 5 Title Formulate event management strategies and coordinate event management services for a public relations event Level 6 Credits 10 Purpose This unit standard is for people who have, or seek

More information

Test and service hydraulic systems on equipment, vehicles, and/or machines

Test and service hydraulic systems on equipment, vehicles, and/or machines Page 1 of 5 Test and service hydraulic systems on equipment, vehicles, and/or machines Level 3 Credits 6 Purpose This unit standard is for people in the automotive repair industry. People credited with

More information

Manage electricity generation dispatch

Manage electricity generation dispatch Page 1 of 6 Manage electricity generation dispatch Level 6 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of principles of power system operation; identify

More information

Outline New Zealand Greenshell mussel (kutai, kuku) farming

Outline New Zealand Greenshell mussel (kutai, kuku) farming Outline New Zealand Greenshell mussel (kutai, kuku) farming 16337 version 3 Page 1 of 5 Level 2 Credits 10 Purpose People credited with this unit standard are able to: identify the Greenshell mussel; describe

More information

Demonstrate knowledge of vegetation fire behaviour

Demonstrate knowledge of vegetation fire behaviour Page 1 of 5 Demonstrate knowledge of vegetation fire behaviour Level 5 Credits 8 Purpose This unit standard is for people with responsibilities for vegetation fire pre-suppression preparedness planning

More information

Carry out routine inspection and servicing on substation emergency services

Carry out routine inspection and servicing on substation emergency services Page 1 of 6 Carry out routine inspection and servicing on substation emergency services Level 3 Credits 4 Purpose People credited with this unit standard are able to: prepare for inspection and servicing

More information

Use advanced felling techniques in arboriculture

Use advanced felling techniques in arboriculture Page 1 of 5 Use advanced felling techniques in arboriculture Level 4 Credits 10 Purpose This unit standard is for people wishing to extend their tree felling skills in an arboriculture situation. People

More information

NZQA registered unit standard 3851 version 7 Page 1 of 5. Service commercial refrigeration and/or air conditioning systems

NZQA registered unit standard 3851 version 7 Page 1 of 5. Service commercial refrigeration and/or air conditioning systems Page 1 of 5 Title Service commercial refrigeration and/or air conditioning systems Level 4 Credits 20 Purpose This unit standard is for people who work in the refrigeration and air conditioning sector

More information

SECURITY STAFF SERVICES Demonstrate knowledge of protective. Security

SECURITY STAFF SERVICES Demonstrate knowledge of protective. Security 1 of 6 level: 3 credit: 7 planned review date: March 2007 sub-field: purpose: Security This unit standard is for people who work or intend to work in. People credited with this unit standard are able to:

More information

NZQA registered unit standard version 3 Page 1 of 5

NZQA registered unit standard version 3 Page 1 of 5 Page 1 of 5 Title Operate the drill rig for horizontal directional drilling Level 3 Credits 15 Purpose People credited with this unit standard are able to: care for and maintain horizontal directional

More information

NZQA registered unit standard version 1 Page 1 of 6. Operate a bitumen distributor for blending and applying bituminous binders

NZQA registered unit standard version 1 Page 1 of 6. Operate a bitumen distributor for blending and applying bituminous binders Page 1 of 6 Title Operate a bitumen distributor for blending and applying bituminous binders Level 4 Credits 22 Purpose * Classification People credited with this unit standard are able to: plan and prepare

More information

Set up, repair and maintain a Baader BA 190 fish filleting machine

Set up, repair and maintain a Baader BA 190 fish filleting machine Set up, repair and maintain a Baader BA 190 fish filleting machine 17949 version 3 Page 1 of 6 Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 190 fish filleting

More information

NZQA registered unit standard version 2 Page 1 of 5

NZQA registered unit standard version 2 Page 1 of 5 Page 1 of 5 Title Display products in the salon environment Level 2 Credits 3 Purpose This unit standard is for entry-level learners working and intending to work in a salon People credited with this unit

More information

NZQA registered unit standard 9506 version 5 Page 1 of 5. Conduct a sample analysis in a petrochemical laboratory

NZQA registered unit standard 9506 version 5 Page 1 of 5. Conduct a sample analysis in a petrochemical laboratory Page 1 of 5 Title Conduct a sample analysis in a petrochemical laboratory Level 4 Credits 6 Purpose This unit standard is for people employed in the petrochemical industry. People credited with this unit

More information

Confirm log grades and scale logs

Confirm log grades and scale logs Page 1 of 5 Confirm log grades and scale logs Level 3 Credits 10 Purpose People credited with this unit standard are able to: manage hazards associated with confirming log grades and scaling logs; demonstrate

More information

IRRIGATION Demonstrate knowledge of irrigation systems, components, and performance

IRRIGATION Demonstrate knowledge of irrigation systems, components, and performance 1 of 5 level: 4 credit: 6 planned review date: August 2006 sub-field: purpose: entry information: accreditation option: moderation option: Water Industry People credited with this unit standard are able

More information

NZQA registered unit standard version 2 Page 1 of 5. Demonstrate knowledge of forest harvesting operations

NZQA registered unit standard version 2 Page 1 of 5. Demonstrate knowledge of forest harvesting operations Page 1 of 5 Title Demonstrate knowledge of forest harvesting operations Level 5 Credits 8 Purpose People credited with this unit standard are able to: explain the objectives of forest harvesting operations;

More information

Explain foot and mouth disease controls in the processing of milk in the dairy industry

Explain foot and mouth disease controls in the processing of milk in the dairy industry Page 1 of 5 Explain foot and mouth disease controls in the processing of milk in the dairy industry Level 3 Credits 4 Purpose People credited with this unit are able to: explain the features and characteristics

More information

NZQA Expiring unit standard version 2 Page 1 of 5. Describe metal roof and wall cladding preparation and installation procedures

NZQA Expiring unit standard version 2 Page 1 of 5. Describe metal roof and wall cladding preparation and installation procedures Page 1 of 5 Title Describe metal roof and wall cladding preparation and installation procedures Level 3 Credits 10 Purpose People credited with this unit standard are able to describe: the planning and

More information

NZQA registered unit standard version 2 Page 1 of 5. Operate x-ray and electronic scanning equipment in a prison environment

NZQA registered unit standard version 2 Page 1 of 5. Operate x-ray and electronic scanning equipment in a prison environment Page 1 of 5 Title Operate x-ray and electronic scanning equipment in a prison environment Level 4 Credits 5 Purpose This unit standard is for people working as officers in a prison environment and covers

More information

Demonstrate and apply knowledge of leading a security team

Demonstrate and apply knowledge of leading a security team Demonstrate and apply knowledge of leading a security team 25627 version 1 Page 1 of 7 Level 4 Credits 15 Purpose This unit standard is for security team leaders who are required to lead a team in a security

More information

NZQA registered unit standard version 1 Page 1 of 5

NZQA registered unit standard version 1 Page 1 of 5 Page 1 of 5 Title Operate timber treatment plant Level 3 Credits 15 Purpose People credited with this unit standard are able to: manage hazards associated with operating and maintaining timber treatment

More information

NZQA registered unit standard version 2 Page 1 of 6. Demonstrate professional and ethical behaviour as an engineering technician

NZQA registered unit standard version 2 Page 1 of 6. Demonstrate professional and ethical behaviour as an engineering technician Page 1 of 6 Title Demonstrate professional and ethical behaviour as an engineering technician Level 6 Credits 15 Purpose This unit standard is intended for people working towards the New Zealand Diploma

More information

NZQA registered unit standard 5555 version 6 Page 1 of 5

NZQA registered unit standard 5555 version 6 Page 1 of 5 Page 1 of 5 Title Arrange and manage a visitor conference Level 5 Credits 20 Purpose People credited with this unit standard are able to: plan operations for a visitor conference; manage monetary, human

More information

National Certificate in Concrete Construction (Sawing and Drilling) (Level 3)

National Certificate in Concrete Construction (Sawing and Drilling) (Level 3) NZQF NQ Ref 1613 Version 1 Page 1 of 6 National Certificate in Concrete Construction (Sawing and Drilling) (Level 3) Level 3 Credits 74 Purpose The National Certificate in Concrete Construction (Sawing

More information

Operate hydro-electric station auxiliary plant

Operate hydro-electric station auxiliary plant Page 1 of 6 Operate hydro-electric station auxiliary plant Level 4 Credits 8 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles of electricity generation

More information

NZQA Expiring unit standard 2117 version 5 Page 1 of 5. Install, test, and maintain water supply backflow prevention devices

NZQA Expiring unit standard 2117 version 5 Page 1 of 5. Install, test, and maintain water supply backflow prevention devices Page 1 of 5 Title Install, test, and maintain water supply backflow prevention devices Level 4 Credits 11 Purpose This unit standard is for people who work in the plumbing industry. People credited with

More information

This unit standard is expiring

This unit standard is expiring Page 1 of 5 Title Apply intelligence analysis techniques to complete an intelligence product Level 5 Credits 15 Purpose People credited with this unit standard are able to: define the intelligence problem

More information

EMPLOYMENT SUPPORT Demonstrate an integrated practice theory for employment support

EMPLOYMENT SUPPORT Demonstrate an integrated practice theory for employment support 1 of 8 level: 6 credit: 15 planned review date: June 2005 sub-field: purpose: entry information: accreditation option: moderation option: Social Services People credited with this unit standard are able

More information

NZQA registered unit standard 6405 version 8 Page 1 of 5. Determine advertising options for small business enterprises. Marketing > Generic Marketing

NZQA registered unit standard 6405 version 8 Page 1 of 5. Determine advertising options for small business enterprises. Marketing > Generic Marketing Page 1 of 5 Title Determine advertising options for small business enterprises Level 4 Credits 5 Purpose People credited with this unit standard are able to: identify business and marketing objectives,

More information

Demonstrate knowledge of the fundamentals of power system earthing

Demonstrate knowledge of the fundamentals of power system earthing Page 1 of 5 Demonstrate knowledge of the fundamentals of power system earthing Level 7 Credits 15 Purpose People credited with this unit standard are able to: compile an explanation on the purpose of earthing;

More information

NZQA Expiring unit standard 3885 version 8 Page 1 of 5. Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry

NZQA Expiring unit standard 3885 version 8 Page 1 of 5. Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry Page 1 of 5 Title Demonstrate knowledge of and use an oxy-acetylene welding plant in the motor body industry Level 2 Credits 4 Purpose This unit standard is for people who are at pre-employment level or

More information

Explain hatchery techniques used in the New Zealand aquaculture industry

Explain hatchery techniques used in the New Zealand aquaculture industry Page 1 of 5 Explain hatchery techniques used in the New Zealand aquaculture industry Level 4 Credits 15 Purpose People credited with this unit standard are able to explain: the conditioning and management

More information

Demonstrate knowledge of the principles of organic horticultural production

Demonstrate knowledge of the principles of organic horticultural production Demonstrate knowledge of the principles of organic horticultural production 21043 version 1 Page 1 of 5 Level 3 Credits 20 Purpose People credited with this unit standard are able to: demonstrate knowledge

More information

NZQA registered unit standard 2930 version 5 Page 1 of 5

NZQA registered unit standard 2930 version 5 Page 1 of 5 Page 1 of 5 Title Develop and coordinate marketing strategies Level 6 Credits 10 Purpose This unit standard is for people who have, or seek responsibility for, or provide advice for, developing the strategic

More information