SHENZHEN POWSTAR TECHNOLOGY LIMITED Capabilities Introduction
|
|
- Natalie Ellis
- 6 years ago
- Views:
Transcription
1 SHENZHEN POWSTAR TECHNOLOGY LIMITED Capabilities Introduction
2 Outline 1. Company Profile 2. Organization Chart & Quality Management System Charts 3. Certificates 4. Company Quality Policy 5. Manufacturing Capabilities Introduction 6. Equipment List 7. What can we do to achieve our customer s expectation? 8. Our Core Partners 9. Contact Information 10.Q & A 27-Jun-01, Slide 2 Slide 2
3 1.Company Profile 27-Jun-01, Slide 3 Slide 3
4 Company Profile SHENZHEN POWSTAR TECHNOLOGY LIMITED was founded in 1998; Company Registered capital: 500 millions RMB, The total staff: Floor Space: m 2 Services Provided: Product Design, Rapid Prototyping, 3D Scanner, Mold Manufacture, Injection Mold Tooling, Die-casting, Stamping, Decoration, Products Assembly, OEM & ODM 27-Jun-01, Slide 4 Slide 4
5 Company Profile SHENZHEN POWSTAR TECHNOLOGY LIMITED is one of the largest mold makers in China. The company has all kinds of advanced equipment, as well as decades of mold making experience, who can provide the range from the phone shell and small precision molds to the auto parts and accessories, and other large aircraft of all types of injection, Alloy Die, lowpressure perfusion and injection molding manufacturing, and secondary processing. Our main market is in Europe, the United States, Japan, the Middle East,types of products covered aircraft industry, the auto industry, the appliance industry and the medical industry, the electronic communications industry, audio industry, toys and so on. Mold Tooling Rapid Prototyping Die Casting 27-Jun-01, Slide 5 Slide 5
6 Company Profile Main Market 27-Jun-01, Slide 6 Slide 6
7 Company Profile Milestone 27-Jun-01, Slide 7 Slide 7
8 Company Profile Our Core Value 27-Jun-01, Slide 8 Slide 8
9 Company Profile Workshop Glance 27-Jun-01, Slide 9 Slide 9
10 2.Organization Chart & Quality Management System Charts 27-Jun-01, Slide 10 Slide 10
11 Organization Chart & Quality Management System Charts Organization Chart Board of Directors General Manager GM Office HR and Admin Manager Purchase Manager Production Director Finance Director Marketing Director Engineering Manager Finance Manager Sales Manager Tooling Manager PMC Manager Injection Molding Manager Decoration Manager QC Manager 27-Jun-01, Slide 11 Slide 11
12 Organization Chart & Quality Management System Charts General processes in place at SHENZHEN POWSTAR TECHNOLOGY LIMITED 27-Jun-01, Slide 12 Slide 12
13 Organization Chart & Quality Management System Charts PROJECT MANAGEMENT Order Receipt Product Design Design Optimization Mold Manufacture Mold Verification Delivery Assembly Printing Painting Injection Mold Customer Service Finish 27-Jun-01, Slide 13 Slide 13
14 Organization Chart & Quality Management System Charts Mold Manufacturing Flow Chart Mold Flow Analysis Mold Design Programming Rough Machining Finish Machining Mold Finish Mold Test and Report Mold Painting Assembly Injection Polishing Mold 27-Jun-01, Slide 14 Slide 14
15 Organization Chart & Quality Management System Charts Order Process Flow Chart Customer s needs Sales Office Product Information Fix Engineering Dept. Tooling Dept. Customer QC Dept. Decoration Painting Dept. Injection Injection Mold Molding Dept. 27-Jun-01, Slide 15 Slide 15
16 Organization Chart & Quality Management System Charts Assembly Process Flow Chart Production Order Receipt Assembly Dept. Confirmation Raw Material Feeding Assembly Checking Assembly Finish Warehouse QC Painting inspection Injection Packaging Mold 27-Jun-01, Slide 16 Slide 16
17 Organization Chart & Quality Management System Charts 27-Jun-01, Slide 17 Slide 17
18 3.Certificates 27-Jun-01, Slide 18 Slide 18
19 Certificates 27-Jun-01, Slide 19 Slide 19
20 Certificates 27-Jun-01, Slide 20 Slide 20
21 Certificates 27-Jun-01, Slide 21 Slide 21
22 Certificates 27-Jun-01, Slide 22 Slide 22
23 4.Company Quality Policy 27-Jun-01, Slide 23 Slide 23
24 Company Core Value Our mission is to be the leading supplier of rapid prototyping, mould tooling manufacturer that provides excellent products and services to increase our customer s competitiveness. Customer loyalty is our primary goal. We are committed to comply with the Quality Management System and regulatory requirements. We empower our employees to initiate actions to ensure both quality and continual improvement in all that we do. We behave as an ethical and responsible organization in all we do. Angel Hou General Manager SHENZHEN POWSTAR TECHNOLOG LIMITED 27-Jun-01, Slide 24 Slide 24
25 5.Manufacturing Capabilities Introduction 27-Jun-01, Slide 25 Slide 25
26 Manufacturing Capabilities Introduction Mold design utilizing: R & D department. Outside contract designers. Pro/Engineer v2001, 3-D Parametric Solid Modeling CAD Design System with Pro/Mold Tooling Design Package Cadkey Workshop v20, 3-D CAD System Cimatron 3-D Solid Modeling CAD System 27-Jun-01, Slide 26 Slide 26
27 Manufacturing Capabilities Introduction Complete Mold build and repair: Our mold makers utilize the latest and most efficient equipment technology in mold construction. Average tool completion for a 2-cavity part is approximately 6-8 weeks. 27-Jun-01, Slide 27 Slide 27
28 Manufacturing Capabilities Introduction Surface Grinding 27-Jun-01, Slide 28 Slide 28
29 Manufacturing Capabilities Introduction The latest CNC Technologies (High Speed Milling, Wire EDM, and Sinker EDM) we can produce precise, economical molds on time. 27-Jun-01, Slide 29 Slide 29
30 Manufacturing Capabilities Introduction Injection Molding Capabilities Conventional Tight Tolerance thermoplastic injection molding ranging from 30 to 330 ton presses. Thin Wall injection molding with wall stock down to.381mm (0.015 inches). Thermoplastic Insert Molding with metal stampings. Reel-to-Reel insert molding with metal stampings. In-Mold Decorating utilizing formed appliqués. Over-Molding of backlit knobs and buttons. Double Shot of Two-color/Dissimilar Material/Mixed-color molding. Ultrasonic Welding of Plastics for assembly. Heat Staking for assembly or insertion of threaded bushings. Decorative Pad Transfer and Hot Stamp printing of multi-color images on plastic surfaces. Assembly and Packaging services. 27-Jun-01, Slide 30 Slide 30
31 Manufacturing Capabilities Introduction Injection Mould and Assembly Line 27-Jun-01, Slide 31 Slide 31
32 Manufacturing Capabilities Introduction Quality Assurance abilities 27-Jun-01, Slide 32 Slide 32
33 Manufacturing Capabilities Introduction Injection Products Humper Bracket Dynamo Humper Auto Part Auto Part Accessory 27-Jun-01, Slide 33 Slide 33
34 Manufacturing Capabilities Introduction Injection Products 27-Jun-01, Slide 34 Slide 34
35 Manufacturing Capabilities Introduction Rapid Prototype Products 27-Jun-01, Slide 35 Slide 35
36 Manufacturing Capabilities Introduction Die Casting Products 27-Jun-01, Slide 36 Slide 36
37 Manufacturing Capabilities Introduction Painting Treatment Silkscreen 100,000 Level Clean Room High Glossy Painting 27-Jun-01, Slide 37 Slide 37
38 6.Equipment List 27-Jun-01, Slide 38 Slide 38
39 Equipment List (Portion) 27-Jun-01, Slide 39 Slide 39
40 Equipment List (Portion) 27-Jun-01, Slide 40 Slide 40
41 Equipment List (Portion) 27-Jun-01, Slide 41 Slide 41
42 7.What can we do to achieve our customer s s expectation? 27-Jun-01, Slide 42 Slide 42
43 What can we do to achieve our customer s expectation? Free Communication Request Feedback Continually Improve Service 27-Jun-01, Slide 43 Slide 43
44 8.Our Core Partners 27-Jun-01, Slide 44 Slide 44
45 Our Core Partners 27-Jun-01, Slide 45 Slide 45
46 9.Contact Information 27-Jun-01, Slide 46 Slide 46
47 Contact Information Contact information: Tel: powstar.net info@sz sz-powstar.net powstar01@gmail.com Skype: powstar01; powstar02 Add: Industrial Zone, Shangxing, Shajing Street, Bao'an District, Shenzhen, Guangdong, China. 27-Jun-01, Slide 47 Slide 47
48 Q & A 27-Jun-01, Slide 48 Slide 48
49 Thank you for listening 27-Jun-01, Slide 49 Slide 49
As a world-class manufacturer of plastic components, our mission is to provide our customers
As a world-class manufacturer of plastic components, our mission is to provide our customers with complete project management through innovative and imaginative engineering solutions. This involves all
More informationDesign Molded Plastics, Inc.
Design Molded Plastics, Inc. Part Design Assistance Design Molded Plastics offers the added resources to take their projects to the next level Key Points: Capturing the design intent Establish part tolerances
More informationFactory Audit Report
Factory Audit Report 1997-2014 AsiaInspection Limited. All rights reserved Client Anonymous Client AI Service No R-us3-142702 Supplier Shenzhen Yes-Hope Auditor Rick Guo Factory Shenzhen Kingda Co., Ltd.
More informationINNOVATION BEYOND TECHNOLOGY
dsept Nov 2012 2016 INNOVATION BEYOND TECHNOLOGY 1 About the VTech Group Locations Headquartered in HKG since 1976 Listed in HKG (HKSE:303) Factories in HouJie, LiaoBu & QingYuan, R&D Center in SZ Operations
More informationDedicated to Quality, Service & Partnerships
Dedicated to Quality, Service & Partnerships Company Introduction With a focus on investment casting, Acewell was established in 1998 and over the years has forged a reputation for dependable quality manufacturing.
More informationwe give shape to ideas
we give shape to ideas METAL BUSHING OUR COMPANY We give shape to ideas 1 2 4 3 SETVIS-FISAT was set up in Vercelli in 1933. The company specialized in plastic material printing and has constantly been
More informationHLH, we make things for you real tools, real parts, real fast HLH, delivering tomorrow today
www.hlhprototypes.com info@hlhprototypes.com HLH, we make things for you real tools, real parts, real fast HLH, delivering tomorrow today HLH Rapid Project Solutions HLH, we make things for you real tools,
More information2890 Ligonier St. Latrobe, PA Phone Fax Toll Free
Your Best Choice For Carbide Components 2890 Ligonier St. Latrobe, PA 15650 Phone 724.532.3041 Fax 724.532.3043 Toll Free 800.862.7066 www.extramet.net OUR HISTORY OUR MISSION Extramet s Primary Objective
More informationDesigned For The Future, Backed By Years Of Experience SInce 1908.
8 G N I Sin SPINNNNING L SPI A TAL E MET E ME M C A M AC 0 9 1 ce Small Metal Spinnings Designed For The Future, Backed By Years Of Experience SInce 1908. Acme s metal spinning technology is targeted to
More informationTOP SHELF. Manufacturer Of Quality Crafted Fixtures & Displays FLOOR DISPLAYS LANE BLOCKERS END CAPS CUSTOM RACKS MERCHANDISING DISPLAYS
Manufacturer Of Quality Crafted Fixtures & Displays FLOOR DISPLAYS LANE BLOCKERS END CAPS CUSTOM RACKS MERCHANDISING DISPLAYS MADE IN USA RETAIL FIXTURES SHELVING SYSTEMS GONDOLAS You may not recognize
More informationTOP SHELF. Fixtures,LLC USA MANUFACTURER OF QUALITY CRAFTED FIXTURES & DISPLAYS
MANUFACTURER OF QUALITY CRAFTED FIXTURES & DISPLAYS MERCHANDISING DISPLAYS FLOOR DISPLAYS LANE BLOCKERS CUSTOM RACKS GONDOLAS END CAPS & MORE! MADE IN USA You may not recognize the name but you will recognize
More informationMANUFACTURING SOLUTIONS FOR FORMING, JOINING AND ASSEMBLY AEROSPACE APPLIANCE AVIATION AUTOMOTIVE BEVERAGE DEFENSE ENERGY HEAVY EQUIPMENT
MANUFACTURING SOLUTIONS FOR FORMING, JOINING AND ASSEMBLY AEROSPACE APPLIANCE AVIATION AUTOMOTIVE BEVERAGE DEFENSE ENERGY HEAVY EQUIPMENT Manufacturing Your Success WHAT WE DO Coldwater Machine Company
More informationPrecision Machining since 1967
Precision Machining since 1967 Put Our Experience to Work for You At RPM, our focus is precision grinding, machining and finishing of close tolerance tooling. Our combination of skilled craftsmen and
More informationGlobalized Win-Win partnership,,, Worldwide best Micro-Tactile switches
Globalized Win-Win partnership,,, Worldwide best Micro-Tactile switches 1 Company Introduction Company Name Switch Korea Co. Ltd./ Qingdao NAMAE Electronics Inc. Foundation Sep. 09, 1977/ Jan. 07, 1992
More informationMicro-Precision Coil and Formed Wire Products for the Medical Device Industry
Micro-Precision Coil and Formed Wire Products for the Medical Device Industry Precision Metal Components For Medical Devices Specialized, complex parts and sub-assemblies Extreme diameter and length capabilities
More informationReport Number: QIP-ASI165175
Report Number: QIP-ASI165175 Audit Date : 09 Apr.,2016 This report is issued by Focus Technology Co., Ltd. () and the supervising inspectorate (SGS-CSTC Standards Technical Services Co., Ltd.) to confirm
More informationEASY BREATHE PORCERAX II INTRODUCING WITH PORCERAX II PLASTIC INJECTION MOLDING OTHERS... Pre-Hardened (35/38 HRC) Sintered, Porous Metal.
INTRODUCING PORCERAX II Pre-Hardened (35/38 HRC) Sintered, Porous Metal 7 or 20 Micron Pore Size BREATHE EASY WITH PORCERAX II PLASTIC INJECTION MOLDING OTHERS... Benefits Prevention of gas burning Eliminates
More informationCONTRACT MANUFACTURER OF PRECISION POWDERED METAL PARTS
ASCO Sintering Co. CONTRACT MANUFACTURER OF PRECISION POWDERED METAL PARTS Precision Powdered Metal Gears Net Shape to AGMA 8 Certification at reduced cost Executive Summary Asco produces over 16,000,000
More informationCNC Technology. Custom Enclosures from Flat-Sheet Plastic - No Tooling! Advantages. Engineering Expertise
Custom DESIGN EnclosureS Custom Enclosures from Flat-Sheet Plastic - No Tooling! Custom designed plastic enclosures, housings, covers, panels and parts without tooling. We develop and manufacture enclosures
More informationDIE RECONFIGURATION AND RESTORATION USING LASER-BASED DEPOSITION. T.W. Skszek and M. T. J. Lowney. Abstract. DMD Process Overview
DIE RECONFIGURATION AND RESTORATION USING LASER-BASED DEPOSITION T.W. Skszek and M. T. J. Lowney Abstract POM Company, Inc., located in Plymouth, Mich., has successfully commercialized the laser-based,
More information3D PRINTED INJECTION MOLDS
3D PRINTED INJECTION MOLDS CAN YOUR BUSINESS BENEFIT? NADAV SELLA 1 STRATASYS / COMPANY OVERVIEW WE ARE THE 3D PRINTING SOLUTIONS COMPANY 2 STRATASYS / COMPANY OVERVIEW FROM SYSTEMS TO SERVICE 3 STRATASYS
More informationOSAKA. NAGOYA ORGANIZER:Japan Die & Mold Industry Association Japan Metal Stamping Association Television Osaka(for Osaka only)
OSAKA April 18-21 2018 June 13-16 2018 NAGOYA ORGANIZER:Japan Die & Mold Industry Association Japan Metal Stamping Association Television Osaka(for Osaka only) Contact Prototype/Design/Analysis & 3D Printing
More informationARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE
ARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE MANNINGTON COLORFIELDS SHEET RUBBER FLOORING Section 09 65 16 Sheet rubber Flooring (Thermoset Rubber) Created May 2012 Mannington Mills, Inc. P. O. Box
More informationUnit 10. Selecting Processes: shaping, joining and surface treatment
Unit 10. Selecting Processes: shaping, joining and surface treatment Mike Ashby Department of Engineering University of Cambridge M. F. Ashby, 2013 For reproduction guidance see back page This lecture
More informationSUCCESSFUL STRESS RELIEF OF MOLDS USING SUB-HARMONIC ENERGY. By: Thomas E. Hebel Bonal Technologies, Inc. Southfield, MI USA
SUCCESSFUL STRESS RELIEF OF MOLDS USING SUB-HARMONIC ENERGY By: Thomas E. Hebel Bonal Technologies, Inc. Southfield, MI USA Beauty is only skin deep applies to molds too! The quality of the mold lies mostly
More informationConcept Laser Industry Specific Solutions
Concept Laser Industry Specific Solutions Mould Advantages of the LaserCUSING process Front End Software/ - interfaces Machine Solutions Materials Technologies QM system Post treatment Case studies Seite
More informationInnovation in Plastic Injection Moulding
Innovation in Plastic Injection Moulding Products and Services CONTENTS 02 About Us 03 How we can help you 05 Ready-To-Go Products 06 Client Projects 08 Contact Us Innovation in Plastic Injection Moulding
More informationdsept 2012 Jan 2017 INNOVATION BEYOND TECHNOLOGY
dsept 2012 Jan 2017 INNOVATION BEYOND TECHNOLOGY 1 About the VTech Group Locations Headquartered in HKG since 1976 Listed in HKG (HKSE:303) Factories in HouJie, LiaoBu & QingYuan, R&D Center in SZ Operations
More informationFORM HEADWALL. FORM HEADWALL (floating) (floating) Installation Manual
FORM HEADWALL (floating) Installation Manual FORM HEADWALL (floating) OVERVIEW The Form is a UL-listed configurable headwall system. This system includes multiple horizontal equipment channels integrated
More informationFrom design to delivery. Technical Moulding. Our complete service offer for technical moulding.
From design to delivery Our complete service offer for technical moulding Technical Moulding We ve always been dedicated to producing top quality products delivered on time. We wouldn t have been in the
More informationOrganisation and operative modalities
Organisation and operative modalities Edition May 2015 CM Europa Stampi s.r.l. Via Torretta 50 40012 Calderara di Reno - Bologna - Italy Phone ++39 051 72 92 77 Fax ++39 051 72 92 67 E-mail: info@cmeuropastampi.i
More informationDesign to Delivery. May 2015 V1.0
Design to Delivery May 2015 V1.0 Contents Introduction Page 1 Product Design Page 2/3 Tool Design and Manufacture Page 4/5 Injection Moulding - Quality Page 6/7 Injection Moulding - Twin shot Page 8/9
More informationEngel Diversified Industries Inc.
Engel Diversified Industries Inc. PO Box 85 1060 Quaker Avenue Jordan, MN 55352 Represented by: Duane Jaworski & Associates 763-792-2184 Toll Free 877-562-5070 Fax 763-785-9065 Toll Free 877-280-2087 EDi
More informationRakes and Kiel Probes for Airfoil Instrumentation
Rakes and Kiel Probes for Airfoil Instrumentation Product general information Rakes and Kiel Probes skillfully positioned onto static and rotating airfoils offer the benefit of obtaining many separate
More informationWhere ideas take shape. LIGHTING
Where ideas take shape. LIGHTING For over 60 years Pexco has been serving the Lighting market with plastic lens extrusions and other plastic lighting fixture components. Pexco provides design and manufacturing
More informationCustom-Engineered Product Capabilities
When it comes to engineered product design and precision manufacturing, Alexandria Industries is highly recognized for exceeding industry standards, advanced engineering and process ingenuity. But what
More informationAluminium & Non-Ferrous Production Optimization Fast, Reliable, Efficient
Optical Surface Inspection for Aluminium & Non-Ferrous Production Optimization Fast, Reliable, Efficient Leading the Way in Aluminium & Non-Ferrous Process Improvement BEYOND INSPECTION MORE Than Just
More informationAluminum Component Pipe Railings
1 SECTION 05 7360 ALUMINUM COMPONENT PIPE RAILINGS PART 1 GENERAL 1.01 SECTION INCLUDES A. Aluminum component pipe handrails and railings. 1.02 RELATED REQUIREMENTS A. Section 02 9000: Landscaping: Installation
More informationton as co low volume at lower cost
ton as co low volume at lower cost ton as co High Mix Wide mix of mechanical parts & mechatronic assemblies from a high mix of materials and processes. Low Volume Production series of 1-20 pieces are our
More informationApprentice Tool Maker, Tool and Die Maintenance Job Description Toolmaker and Tool and Die Maintenance Technician, Level 3
Apprentice Tool Maker, Tool and Die Maintenance Job Description Toolmaker and Tool and Die Maintenance Technician, Level 3 (Job Code and Level: MFGTOO000) Definition: To learn the different types of tools
More informationGlobal, end-to-end partnership for inventors and product makers
Global, end-to-end partnership for inventors and product makers www.imagenefactory.com A Subsidiary of MAKERS ONE STOP SHOP PRODUCT DEVELOPMENT MANUFACTURE COMMERCIALIZE Partnership with Crowdfunding Companies
More informationYDF VALVES Presentation Your Partner of Flow Control System
YDF VALVES Presentation Your Partner of Flow Control System www.ydfvalve.com Date: Jan, 2014 Milestone In 1978 Yancheng Power Station Valve Corporation. Produce high Pressure rating Gate, Globe and Check
More informationPrecision on a µm scale. Schweizer Precision Engine Components
Precision on a µm scale Schweizer Precision Engine Components Since establishing our company in 1953, we have produced approximately 230 million precision engine and steering components. Since 1953 Precision
More informationWelcome to. The Gateway of Indian Drop Forging. An ISO 9001: 2008 Certified Company. Veraval Main Road, Veraval (Shapar) ,
Welcome to The Gateway of Indian Drop Forging An ISO 9001: 2008 Certified Company Veraval Main Road, Veraval (Shapar) 360024, Dist. Rajkot, Gujarat, India Phone no. : - +91 2827 252020/3030, Fax: - +91
More informationEAL Level 2 NVQ Diploma in Performing Engineering Operations (QCF) Qualification Code: 500/9836/6
EAL Level 2 NVQ Diploma in Performing Engineering Operations (QCF) Qualification Code: 500/9836/6 Engineering Practices Scheme Number/Pathway: 500/9836/6PEA The learner is required to complete all three
More informationDiamond Innovations & Methods Machine Tools Bring Advanced EDM Automation to Reality
cover story Diamond Innovations & Methods Machine Tools Bring Advanced EDM Automation to Reality About Diamond Innovations, Inc. In keeping with their name, Diamond Innovations, Inc. (Columbus, OH U.S.A.)
More informationBakeMax Dough Mini Moulder BMMDM02
BakeMax Dough Mini Moulder BMMDM02 2 Instruction Manual 1. Preface ------------------------------------------- P2 2. Machine Introduction -------------------------------- P2 3. Machine Specification and
More informationPlastics made perfect.
Plastics made perfect. Plastic injection molding simulation of an electric hedge trimmer. Designed in Inventor software. Simulated in software. Rendered in 3ds Max software. Validation and Optimization
More informationAEROSPACE. Where ideas take shape. Get to know the Pexco way.
Get to know the Pexco way. Pexco is a North American leader in the design, manufacturing and delivery of custom plastics solutions. Our team of engineers and proven experience in several specialty segments
More information1060, 1100, 3003, 3105, 5052, 5083, 5754, 6061 etc.
Product Name Picture Alloy Temper Thickness Width 5 bars Tread Plate /Aluminu m Checker Plate 1060, 1100, 3003, 3105, 5052, 5083, 5754, 6061 etc. H12, H14, H16, H18, H22, H24, H26, H32, H34, H36, H38,
More informationI N T E R N A T I O N A L LT D
INTERNATIONAL LT D Leaders in investment and sand casting. Aeromet is a leading supplier of aluminium and magnesium castings, and fully-finished, assembly ready cast parts for the aerospace and defence
More informationINNOVATIO LARGE TONNAGE LARGE CUSTOM MOLDING INNOVATION MANUFACTURING OPTIMIZATION PROGRAM MANAG SOLUTIONS ENGINEERING TURNKEY OPERATIONS
GLOBAL SOURCING SOLUTIONS SERVIC INNOVATIO TURNKEY OPERATIONS LARGE TONNAGE MANUFACTURING OPTIMIZATION PROGRAM MANAG LARGE TECHNOLOGY CUSTOM MOLDING SOLUTIONS INNOVATION ENGINEERING INTERNATIONAL Our Mission
More informationPlastic Moulding. Optical Moulding Technical Moulding Formed-in-Place Gasketing. Plastic Moulding
Plastic Moulding Plastic Moulding Optical Moulding Technical Moulding Formed-in-Place Gasketing Designed and Manufactured in the UK Edition 2 01420 470400 www.fernhoward.com/plastic-moulding Fern-Howard
More informationCasting Defects - Sand Mold, Metal Casting
1 de 9 28/11/2013 20:04 About Us Casting Products Casting Workshop Machining Workshop Inspection Certif Casting Defects - Sand Mold, Metal Casting Introducing various metal casting defects with many pictures
More informationSECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Doors B. Track and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
More informationEnginEEring build CapabilitiEs..
Engineering Build Capabilities.. Introduction Edgewood Chemical Biological Center (ECBC) Engineering leverages its integrated design capabilities to provide a comprehensive suite of prototyping and manufacturing
More informationCONTRACT MANUFACTURING
CONTRACT MANUFACTURING All products and manufacturing processes comply with or exceed all recognized certification program including ISO9000, QS9000, Mil Standards and AWS D1.1 welding Humdinger Equipment
More informationMar 2015 Sept 2012 INNOVATION BEYOND TECHNOLOGY
Mar 2015 Sept 2012 INNOVATION BEYOND TECHNOLOGY 1 About the VTech Group Locations Headquartered in HKG since 1976 Listed in HKG (HKSE:303) Factories in HouJie, LiaoBu & QingYuan, R&D Center in SZ Operations
More informationAmerican Metal Specialties, Inc.
American Metal Specialties, Inc. www.cablerailings.com (253) 272-9344 (253) 627-3843 Fax PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 05 73 00 STAINLESS STEEL ORNAMENTAL HANDRAILS AND RAILINGS For best
More informationalimex Product Information
Quality, Flexibility, Knowledge, Experience, Excellence: Solutions in Aluminium Cast Plates. alimex Product Information PROVIDING LEADING-EDGE ALUMINIUM CAST PLATE SOLUTIONS Contents ACP 5080 4-5 ACP 5080R
More informationISO 9001:2015. Quality Management Systems Documentation. Quality Manual / Documented Information. Document No. QM-001
ISO 9001:2015 Quality Management Systems Documentation / Documented Information Document No. QM-001 Mailing Address: PO Box 149 Flippin, AR 72634 1-870-453-2261 www.microplastics.com 1 P a g e Table of
More informationDie Insert Material and Heat Treating. Table of Contents
GLOBAL MANUFACTURING ENGINEERING STANDARDS CASTING TOOLING STANDARDS Standard ID: HPDC-G-2 Die Insert Material and Heat Treating Table of Contents 1.0 General Requirements 1.1 Purpose 1.2 Scope and Document
More informationPART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGINGS
p 1 of 6 UF-1 UF-12 PART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGING the test temperature be higher than 20 F ( 29 C). Certification is required. An ultrasonic examination shall be made
More informationLocation. Distance from : Registered Office and Works
Company Profile Location Registered Office and Works Plot No. D4-D4/1, Five Star Industrial Estate, Kagal, Kolhapur- 416236 India Tel: +91 231 2685 300 Fax +91 231 2685 333 email: info@utpindia.com www.utpindia.com
More informationADVANCING ADDITIVE MANUFACTURING IN AEROSPACE AM-AERO14
ADVANCING ADDITIVE MANUFACTURING IN AEROSPACE AM-AERO14 ADDITIVE MANUFACTURING Aerospace is leading the way in adopting additive manufacturing (AM) for the manufacturing industry. AM allows aerospace manufacturers
More informationGtpl dish tv hd set top box or android box remote control app
Gtpl dish tv hd set top box or android box remote control app Product Description Product Name Gtpl dish tv hd set top box or android box remote control app Model Number TZH-261 Color black/white/custom
More informationJ.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25
TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140
More informationSECTION ORNAMENTAL ALUMINUM RAILING. ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products.
SECTION 05720 ORNAMENTAL ALUMINUM RAILING ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products. This section is based on the products of Superior Aluminum Products,
More informationANSWER ONLY FIVE QUESTIONS
Ministry of Higher Education & Scientific Research, Baghdad-Iraq University Of Technology Department of Materials Engineering وزارة التعليم العالي والبحث العلمي بغاد - العراق الجامعت التكنولوجيت قسم هندست
More informationDesign Considerations to Successfully Manufacture Complex Overmolds
Design Considerations to Successfully Manufacture Complex s The Xcentric Mold & Engineering Story In the mid 90 s, two Michigan-bred brothers working for other companies as mold makers realized that all
More informationHigh Precision Molds System Solutions
Otto Männer GmbH Unter Gereuth 9 11 79353 Bahlingen Germany Phone +49 (0) 7663 609-0 Fax +49 (0) 7663 609-299 info@maenner-group.com 10/17 Technical specifications subject to change. High Precision Molds
More informationSTUDY OF PISTON SLEEVE MANUFACTURED BY SAND CASTING PROCESS TO REDUCE REJECTION RATE USING SIMULATION SOFTWARE
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN 2249-6890 Vol. 3, Issue 2, Jun 2013, 161-168 TJPRC Pvt. Ltd. STUDY OF PISTON SLEEVE MANUFACTURED BY
More informationHow ISO/TS Developed
ISO/TS16949 Documentation Structure 3 rd Party Certification Requirements Role of Top Management- for Implementation TS defines the Quality Management System requirements for the design and development,
More informationEXH HEAT-SINK ALUMINIUM ENCLOSURE
EXH HEAT-SINK ALUMINIUM ENCLOSURE EXH series is an aluminium enclosure with a highly efficient heat-sink top cover. Suitable to be used as fanless PC, power amplifier, and power supply box where heat dissipation
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ABP SERIES OF AUTOMATIC BLISTER PACKAGING MACHINERY Ridat ABP series of machines are some of the most advanced models in the comprehensive range of Ridat blister packaging equipment.
More informationServing Industry Since 1921 PRECISION FABRICATION OF PLASTIC PARTS
Serving Industry Since 1921 PRECISION FABRICATION OF PLASTIC PARTS 2 Franklin s Solution People Care About Your Business Since 1921 businesses worldwide have depended on Franklin Fibre- Lamitex Corporation
More informationUDDEHOLM NIMAX. Nimax is a trade mark registered in the European Union and in the U.S.
UDDEHOLM NIMAX Reliable and efficient tool steel is essential for good results. The same goes for achieving high productivity and high availability. When choosing the right steel many parameters must be
More informationSECTION IMPACT RESISTANT WALL PROTECTION
SECTION 10265 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Impact-Resistant Wall Protection including Wall guards,
More informationUNCONVENTIONAL MACHINING PROCESS UNIT 1 INTRODUCTION. Prepared by S. SENTHIL KUMAR AP / MECH SVCET
UNCONVENTIONAL MACHINING PROCESS UNIT 1 INTRODUCTION Prepared by S. SENTHIL KUMAR AP / MECH SVCET INTRODUCTION Conventional machining process Metal is removed by means of tool which is harder than work
More informationMission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
More informationWieland Components 2
Wieland Components 2 Wieland Components Wieland-Werke AG is an innovative manufacturer of prefabricated components: Wieland Components The Complete Solution. Wieland is able to provide, on request, a complete
More informationSECTION EXPANSION CONTROL
SECTION 07 95 00 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationPLASTIC SOLUTION S INTEGRETOR
PLASTIC SOLUTION S INTEGRETOR PLASTIQUES DELVALLÉE, 4, 6 ROUTE DE CHAUMASSON, 89140 VILLETHIERRY; TEL : 03.86.66.50.33 ; FAX : 03.86.66.58.25 INFO@PLASTIQUESDELVALLEE.FR A STORY, A LOCATION PLASTIQUES
More informationSECTION PANEL AND POST AND PYLON SIGNAGE. 1. Non-illuminated Panel and Post signs. 2. Internal illumination Pylon (Cabinet and Post) signs.
PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Non-illuminated Panel and Post signs. 2. Internal illumination Pylon (Cabinet and Post) signs. 1.2 PERFORMANCE REQUIREMENTS A. Structural
More informationONE OF LEADING MANUFACTURER
ONE OF LEADING MANUFACTURER THE WORLD S MOST POWERFUL AND CAPABLE INTEGRATED PLANTS! 310.000 m 2 TOTAL LAND AREA & 130.000 m 2 COVERED AREA SINCE 1992 Applus is a leading manufacturer & exporter of suspension
More informationIndustrial Products. Our Innovation. Your Advantage.
Industrial Products Our Innovation. Your Advantage. Bradken s Engineered Products Division is a full service iron and steel foundry and machining organization. We cover a wide range of materials and configurations
More informationChapter 19. Forming and Shaping Plastics and Composite Materials
Chapter 19 Forming and Shaping Plastics and Composite Materials Characteristics of Forming and Shaping Processes for Plastics and Composite Materials Forming and Shaping Processes for Plastics, Elastomers,
More informationHigh-Performance Treatments & Coatings
High-Performance Treatments & Coatings Advanced Technologies a MISUMI Group Company Leading-edge Surface Treatments/Coatings Increase Wear, Improve Product Performance Surface Treatments: DayKool (XCR)
More informationDIVISION 10 SPECIALTIES SECTION OPERABLE PARTITIONS
DIVISION 10 SPECIALTIES SECTION 10 22 26 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationAluminium Alloy Specification
Casting Overview China supply partners Conventional ELITE Technique Conventional Individual Casting Weight up to 15 Kg 15 Kg 25 Kg Max size range 500mm x 500mm x 500 mm 500mm x 500mm x 500 mm 500mm x 500mm
More informationHigh productivity part manufacturing
www.siemens.com/plm/nx/cam High productivity part manufacturing NX CAM a complete solution for making better parts faster www.siemens.com/plm The NX CAM advantage How does NX software help you make better
More informationPRODUCT SPECIFICATIONS
PART 1 GENERAL 1.01 SUMMARY A. Section Includes: High density cast resin architectural products, including columns, panels, caps, bases, trim elements and balustrade systems. Specifier Note: Article below
More informationBusiness Management System: Manual 00-BMS-001
Business Management System: Manual 00-BMS-001 Preface This manual defines the Business Management System (BMS) established by GM Nameplate. The BMS is comprised of the processes needed to support GM Nameplate
More informationA. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationUTILIZING ADVANCED COMPOSITE TECHNOLOGY
SEPTEMBER 25 TH 2017 UTILIZING ADVANCED COMPOSITE TECHNOLOGY Beispielbild passendes Bild einfügen Paul Thom, Sales and Product Manager Hydraulic Press Systems E-Mail paul.thom@schulergroup.com Mobile +1
More informationShackles. Applications. Range. Design. CAD drawings. Finish
Applications Shackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other fittings. Screw pin shackles are used mainly for non-permanent applications.
More informationAutomated Machinery & Production Systems
Automated Machinery & Production Systems Success through Commitment In today s business environment, it s imperative that you remain as competitive as possible. Working with a strong partner that you can
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the
More informationINNOVATION IN PLASTICS
INNOVATION IN PLASTICS History Take-over by the brothers Willy Friedrich Büchner and Erich Büchner Production of metal-standard-parts by punching and rotating The production range was enlarged by pressure
More informationIntroduction. 1. Outline of fan case ring
A near-net-shape (NNS) ring-rolling process was developed to reduce the forging weight of a rolled, fan case front, ring made of Ti-6Al-4V. This was achieved by optimizing the ring-rolling process in which
More information