Soffitto System A track-based, vertically-suspended system for display

Size: px

Start display at page:

Download "Soffitto System A track-based, vertically-suspended system for display"

Christopher Ramsey
6 years ago
Views:

1 Soffitto System A track-based, vertically-suspended system for display B&N Industries, Inc. Main office: 1409 Chapin Avenue, 2nd Floor Burlingame, California (800) New York Showroom and office: 420 West 14th Street New York, New York (212)

2 The Track and Upright All Uprights are suspended from an aluminum track, which can be screwed into a ceiling or window soffit. The Uprights have a glide, which keeps the Uprights hanging vertically plumb. All Uprights can be slid along the Track to any location, or removed completely by sliding them off the end of the Track for a change in layout. The Uprights and their glides are polished stainless steel. Because they use the same Tracks, this system is interchangeable with our Cable Maxi and Cable Mini Systems. 2 www. BNind.com

Angled Shelves Angled Shelves are perfect for displaying shirts, printed items, sweaters, or shoes. They are available in polished stainless steel, acrylic, or wood.

3 Angled Shelves Angled Shelves are perfect for displaying shirts, printed items, sweaters, or shoes. They are available in polished stainless steel, acrylic, or wood. For stock colors of our acrylic and wood, see the Materials, Colors, and Finishes section in the B&N Design Guide on pages Angled Shelves use the Crossbar as their support, and have a bracket attached to the back which holds them in place

4 The Parts The Basics The Basic Hanging Hardware Uprights can be slid along the ceiling Track, and removed to create simpler displays. Here, two Uprights support three sets of 13" Hangbars and 13" (actual width of shelves is 12", see specs.) Angled Shelves in polished stainless steel. Ceiling Track Wall, ceiling or floor fixed. Stocked and sold in 2 meter (78 3/4") lengths. 3/4" x 3/4" square extrusion. Available in satin anodized aluminum only. This track is the same track that is used in all of our Cable Maxi and Cable Mini Systems, which allows the Soffitto System to be interchanged with our Cable Systems. T3.1/ $ / meter Uprights Uprights are polished stainless steel and come with a hanging glide to slide into the Ceiling Track. They can be positioned at any point along the Track by sliding. There are locating holes on two sides of the Uprights at 6" intervals, and all accessories can be mounted on either side of the same hole. Polished stainless steel. Universal Hook The Universal Hook is used to attach all accessories to the Uprights. They can also be used for Client-produced display items, as they are attached using two flat head screws. Polished stainless steel. Universal Hook 5/8" x 1/2" x 1 1/4" $ Universal Hook with Graphic Clip The Universal Hook with Graphic Clip is used to support graphic panels on the Uprights. These are two pieces that are connected together, and must be used together. The Graphic Clip section has two set screws on the back which secure graphics in place. These can be used with Clientproduced graphics, and also come included with our Acrylic Graphic Holders. Can support up to 3/8" thick graphics. Universal Hook with Graphic Clip 5/8" x 1 1/4" x 1 1/4" $ /8" x 5/8" x 96" $ The Hangbars Hangbars Hangbars can be used as is, to suspend hangers or flat fabric items such as scarves or tabletop textiles. They have tapped holes in the top which accommodate our shelves, or any Clientproduced shelves or boxes. Hangbars come in three lengths: 13", 24" and 48". They set the standard for the spacing of all accessories that use them as support. All Hangbars come with the two Universal Hooks attached. 13" Hangbar 12" x 1 1/2" x 1/2" $ " Hangbar 23" x 1 1/2" x 1/2" $ " Hangbar 47" x 1 1/2" x 1/2" $ www. BNind.com

5 The Universal Hook Above is a closeup of the Universal Hook. The Hook is attached to Hangbars and Open Cubes with two screws. A small J-Hook locks into the holes in the Upright. Two Universal Hooks can be mounted side-byside on a single Upright so that horizontal continuity to the design can be accomplished

Graphic Holders Graphic Holders Graphic Holders are bent 1/8" thick clear acrylic pockets for graphics. Each Graphic Holder comes with 4 Universal Hooks with Graphic Clips.

6 Graphic Holders Graphic Holders Graphic Holders are bent 1/8" thick clear acrylic pockets for graphics. Each Graphic Holder comes with 4 Universal Hooks with Graphic Clips. Universal Hooks with Graphic Clips can also be ordered separately for Client-produced graphics, and fit 3/8" graphics, without the graphic holders. (see page 4) 13 Graphic Holder Vertical 11 5/8"w x 15"h Image Size: 11 5/8" x 15" $ Graphic Holder Horizontal 22 5/8"w x 15"h Image Size: 22 5/8" x 15" $ " Graphic Holder Vertical 22 5/8"w x 28"h Image Size: 22 5/8" x 28" $ Graphic Holders Shown here is the Vertical 24" Graphic Holder in clear acrylic with 4 Universal Hooks with Graphic Clips. Below the Graphic Holder is a 24" Acrylic Shelf, supported by a 24" Hangbar. At the bottom, a 24" Hangbar. All in polished stainless steel. The Uprights have locating holes every 6" along the Uprights to accommodate any combination of accessories and maximize display impact. 48" Graphic Holder Narrow 46 5/8"w x 15"h Image Size: 46 5/8" x 15" $ " Graphic Holder Wide 46 5/8"w x 24"h Image Size: 46 5/8" x 24" $

7 The Shelves The Angled Shelves Open Cubes Acrylic Shelves Acrylic Shelves come with pre-drilled holes and screws to attach to the Hangbars. 3/8" acrylic in stock colors. For all stock colors, see the Materials, Colors, and Finishes section of the B&N Design Guide on pages " Acrylic Shelf 12" x 13 1/2" x 3/8" $ " Acrylic Shelf 23" x 13 1/2" x 3/8" $ " Acrylic Shelf 47" x 13 1/2" x 3/8" $ Angled Shelves, Polished Stainless Steel Great for shirts, shoes, sweaters, or books. Polished stainless steel with a saddle bracket on the back. Requires a Hangbar to be installed on the Uprights. All Angled Shelves have a 1" lip. 13" Angled Shelf Polished stainless steel 12" x 14", 1" lip $ " Angled Shelf Polished stainless steel 23" x 14", 1" lip $ " Angled Shelf Polished stainless steel 47" x 14", 1" lip $ Angled Shelves, Acrylic 3/8" acrylic with a saddle bracket on the back. Requires a Hangbar to be installed on the Uprights. For all stock colors, see the Materials, Colors, and Finishes section of the B&N Design Guide on pages Open Cube, Acrylic Open Cubes are made from 3/8" thick acrylic and come with 4 Universal Hooks for installation on the Uprights. For all stock colors, see the Materials, Colors, and Finishes section of the B&N Design Guide on pages " x 12" x 11 3/4" deep. Open Cube, Acrylic $ " Angled Acrylic Shelf 12" x 14", 1" lip $ " Angled Acrylic Shelf 23" x 14", 1" lip $ " Angled Acrylic Shelf 47" x 14", 1" lip $ Open Cube, Wood Made from 1/2" thick mdf and comes with 4 Universal Hooks for installation on the Uprights. For all stock colors, see the Materials, Colors, and Finishes section of the B&N Design Guide on pages " x 12" x 11 3/4" deep. Wood Shelves Wood Shelves come with pre-drilled holes and screws to attach to the Hangbars. 3/4" mdf in stock laminates. For all stock colors, see the Materials, Colors, and Finishes section of the B&N Design Guide on pages " Wood Shelf 12" x 13 1/2" x 3/4" $ " Wood Shelf 23" x 13 1/2" x 3/4" $ " Wood Shelf 47" x 13 1/2" x 3/4" $ Angled Shelves, Wood 1/2" thick mdf with a saddle bracket on the back. Requires a Hangbar to be installed on the Uprights. For all stock colors, see the Materials, Colors, and Finishes section of the B&N Design Guide on pages " Angled Wood Shelf 12" x 14", 1" lip $ Open Cube, Wood $ " Angled Wood Shelf 23" x 14", 1" lip $ " Angled Wood Shelf 47" x 14", 1" lip $ www. BNind.com

Open Cubes Open cubes are perfect for highlighting accessories, shoes, or cosmetics. Here, is an Open Cube in 3/8" acrylic. The Universal Hooks hold the Cube on the Upright.

8 Open Cubes Open cubes are perfect for highlighting accessories, shoes, or cosmetics. Here, is an Open Cube in 3/8" acrylic. The Universal Hooks hold the Cube on the Upright. Accessories can be attached to the same hole from either side of the Upright, allowing a horizontally-aligned layout. The Universal Hooks can also be ordered separately for Client-produced display items. 8 www. BNind.com

9 Installation Ideas 1 Track. (4) Uprights. (2) 24" Wood Shelves with (2) 24" Hangbars for support. (4) 13" Hangbars for Clientprovided fabric banners Track. (3) Uprights. (3) Acrylic Open Cubes. (6) Universal Hooks with Graphic Holders for a Client-provided graphic. Track. (2) Uprights. (1) 48" Narrow Graphic Holder. (1) 48" Angled Shelf in polished stainless steel. (1) 48" Wood Shelf with (2) 48" Hangbars for support. Track. (2) Uprights. (1) 48" Wood Shelf with (1) 48" Hangbar for support. (4) 48" Narrow Graphic Holders. Track. (2) Uprights. (5) 13" Vertical Graphic Holders Track. (3) Uprights. (5) 24" Vertical Graphic Holders. Track. (2) Uprights. (1) 13" Vertical Graphic Holder. (3) 13 Angled Shelves in polished stainless steel with (3) 13" Hangbars for support. Track. (2) Uprights. (1) 13" Vertical Graphic Holder. (3) Acrylic Open Cubes. Track. (2) Uprights. (4) Universal Hooks with Graphic Clips for Client-provided graphic. (1) 48" Wood Shelves with (1) 48" Hangbars for support. Track. (3) Uprights. (2) 24 Vertical Graphic Holders. (2) 24" Wood Shelves with (2) 24" Hangbars for support

10 Installation Ideas 11 Track. (3) Uprights. (2) 13" Graphic Holders. (3) Acrylic Open Cubes Track. (4) Uprights. (3) 24 Vertical Graphic Holders. (6) 24" Wood Shelves with (6) 24" Hangbars for support. Track. (2) Uprights. (1) 24 Vertical Graphic Holder. (2) 24" Wood Shelves with (2) 24" Hangbars for support. Track. (2) Uprights. (1) 24 Vertical Graphic Holder. (3) 24" Angled Shelves in polished stainless steel with (3) 24" Hangbars for support. Soffitto can also be used with multiple tracks, for layering displays Track. (2) Uprights. (1) 48 Large Graphic Holder. (3) 48" Angled Shelves in polished stainless steel with (3) 48" Hangbar for support. Track. (3) Uprights. (1) 13 Graphic Holder. (1) 48 Large Graphic Holder. (1) 13 Acrylic Shelf with (1) 13 Hangbar for support. (1) 48 Acrylic Shelf with (1) 48 Hangbar for support. (1) 13" Hangbar for hanging clothing. (1) 48" Hangbar for hanging clothing. 10 www. BNind.com (2) Ceiling Tracks. (4) Uprights. In front, (1) 13" Wood Shelf with (1) 13" Hangbar for support. In back, (6) Universal Hooks with Graphic Clips for Client-provided graphic. B & N I N D U S T R I E S, I N C. B&N Industries, Inc. Main office: 1409 Chapin Avenue, 2nd Floor Burlingame, California (800) (2) Ceiling Tracks. (4) Uprights. In front, (1) 48" Wood Shelf with (1) 48" Hangbar for support. In back, (6) Universal Hooks with Graphic Clips for Clientprovided graphic. New York Showroom and office: 420 West 14th Street New York, New York (212) B&N Industries, Inc.

11 Terms And Conditions ORDERING BY PHONE (outside Northern California) (Northern California) ORDERING BY FAX (ready 24 hours a day) CUSTOMER SERVICE Customer service is available from 8:00am to 5:00pm (Pacific Standard Time) to answer any of your questions regarding products or orders. Please have your account number and purchase order number available. WARRANTY We fully support the quality of our product. If there are any manufacturing defects, please contact your account executive or our Customer Service Department for assistance. CATALOG ERRORS The catalog has been reviewed to present information and prices as accurately as possible. If an error is found in description or price, we reserve the right to correct it. PRICES ARE SUBJECT TO CHANGE AT ANY TIME. ORDER SHIPMENTS Orders which are in stock will ship via ground in 2-5 days, unless another service level is requested by the customer. BACK ORDERS Unless otherwise noted, back orders will ship as soon as they are in stock at our facility. Our account executives or Customer Service Department will keep you advised on the status of all back orders. CANCELLATION AND RETURN ITEMS 1. Stock items must be returned within 30 days, in re-sellable condition. Return of stock items will result in a re-stocking fee of 25%. Freight charges are the responsibility of the customer. Returned items will not be accepted unless B&N Industries, Inc. has been notified prior to the shipment and has issued a return authorization. Damages in shipment of a return is not B&N Industries, Inc. s responsibility. 2. Non-stock merchandise may not be returned. FREIGHT AND MULTIPLE SHIPMENTS 1. The following will result in additional charges unless otherwise stated on your quotation: - Shipments to multiple destinations. - Charging shipments to multiple destinations. - Customer requesting the order be split into multiple packages and shipped to one location. 2. Collect or 3rd Party Billing shipments are the responsibility of the freight payer. 3. Freight quotations are subject to re-quote at the time the order is placed or if shipment is delayed. 4. Customer is responsible to arrange and pay for. International freight, as quotes are for transportation only. The quote does not include broker, customs fees, duties, taxes, etc. 5. Weights and measurements may change due to changes in suppliers and/or packaging. 6. B&N can not guarantee delivery times or dates. Delivery times and dates are the responsibility of the shipping agent. PRODUCT DISCREPANCIES AND DAMAGES VIA SHIPMENT 1. Customer must inspect goods upon delivery for damage or discrepancy. 2. B&N accepts no liability for damage incurred during shipping. Any damage found at time of delivery must be noted by customer on delivery receipt and signed/initialed by driver. Customer is to retain all packaging with damaged items for an on site inspection by carrier. For damage on 3rd party or collect shipments, the customer is responsible for filing the claim with the carrier for financial reimbursement. 3. If any product arrives in damaged condition, a freight claim must be filed with the delivering carrier. Retain packing material and note on the Bill of Lading DAMAGED. Our Customer Service Department will assist you with any questions regarding filing a freight claim. 4. All claims regarding shortages and freight damages must be presented WITHIN 7 DAYS of receiving the shipment. PAYMENT METHODS AND TERMS 1. We accept VISA, MASTERCARD, and AMERICAN EXPRESS. 2. Payment is due in full prior to shipping of product for all PREPAID ACCOUNTS. We do not ship COD. For payment made by check or bank transfer, the order will be processed upon receipt and approval of the check or receipt of the funds. 3. A minimum $ 5,000 order is required to open an account. 4. Approved repeat customers can qualify for NET 15 day terms. A credit application must be completed with the necessary references. Please allow 2-3 weeks for processing. Once credit is approved, a 50% deposit is required on the initial order and future orders will be evaluated for deposit requirements. All custom orders will continue to require a 50% deposit. SALES TAX 1. Any order delivered within the states of California, Illinois, or New York are taxable unless we receive a valid CA/IL/NY resale card prior to the shipment. 2. Taxable orders paid for by the customer and stocked at our California facility will be taxed 8.25% (or the current rate for San Mateo County) regardless of ultimate destination. 3. Orders from resellers located outside California that are dropshipped to their customer within California are subject to sales tax, unless we have received a valid California resale card from the purchaser or their California representative. PROTOTYPES, DRAWINGS, TOOLING, AND FIXTURES 1. Drawings provided by B&N are the exclusive property of B&N Industries, Inc. 2. Prototypes made from drawings that are not detailed and approved by B&N Industries, Inc., or have been supplied via verbal instruction from the customer, are subject to the interpretation of B&N Industries, Inc. 3. Tooling dies and fixtures made and used exclusively for a job or customer, remain the property of B&N Industries, Inc., unless otherwise established. PHOTOGRAPHY OF COMPLETED PROJECTS B&N Industries, Inc. reserves the right to photograph, upon completion, any project that has utilized our product offerings, and retains the rights to use the photographs in advertising, our website, public relations, catalogs and all marketing materials. Terms 54 www. BNind.com

ONLINE CATALOG. 3.0mm (1/8 ) Dia. Rod Display Systems. Features & Components CONTACT INFORMATION.

ONLINE CATALOG. 3.0mm (1/8 ) Dia. Rod Display Systems. Features & Components CONTACT INFORMATION. ONLINE CATALOG 3.0mm (1/8 ) Dia. Rod Display Systems Features & Components CONTACT INFORMATION To Order Products, Check Status of Your Order or Track Your Package... call toll free 800-753-9688 Send Your