NUCLEAR INSTRUMENTATION & CONTROL. Long term support solutions for Nuclear Instrumentation & Control

Transcription

1 Long term support solutions for Nuclear Instrumentation & Control

2 A wide range of services to support nuclear utilities Plant protection, control, supervision and monitoring relies on safety-critical I&C systems. Utility operators require I&C technology that is reliable, easy to maintain and fully operational throughout the lifetime of the reactor. Rolls-Royce has developed a comprehensive service package incorporating long term support engineering solutions and tools. Through long-term support agreements with customers, Rolls-Royce is committed to maintaining the capability to manufacture, modify, repair and test at board, rack and system level over a long time period. Our long-term support agreements incorporate solutions to a range of technical challenges including ageing hardware, the evolution of technology and maintaining essential skills and tools. Evolution mastering Technical data management and experience feedback On-plant Customer Assistance Rolls Royce understands the regulatory requirements and commercial pressures a utility faces and our specialist I&C service support package is designed to maximise output efficiency, keep plants operating safely and reliably for longer and minimise downtime. Evolution Technical mastering Intelligence and obsolescence management On-site Customer Assistance Utilities need to have reliable support available at short notice. An ability to effectively manage ageing equipment proactively is a key capability of Rolls Royce. We not only supply replacement parts, we also monitor and anticipate component and system obsolescence, updating over 20,000 nuclear components annually. Instrumentation & control (I&C) systems use constituent elements such as equipment, modules, sensors, transmitters, redundancies and actuators to sense basic physical parameters, monitor performance, integrate information and automatically perform any necessary adjustments to plant operations. The systems also respond to failures and abnormal events, ensuring the safe and efficient production of power. MAINTAINING THE SAFE AND RELIABLE OPERATION OF NUCLEAR POWER PLANTS IS A PART OF THE RICH HERITAGE OF ROLLS ROYCE. Equipment Maintenance Equipment Configuration Management Customers Spare parts Training Management of technical references guidebook Equipment Refurbished

3 Life-cycle management Repairs The speed of technology development can lead to shortterm obsolescence of electronic components. This in turn can result in reduced life-cycles for finished products and can also affect maintenance. Profitability Repair capability depends not just on the availability of replacement parts but also on the retention of resources, such as machine tools and the skills necessary to support the full lifecycle of individual customers equipment. To address this challenge, Rolls-Royce offers a life-cycle management that consists of: monitoring the condition of units and systems manufacturing processes and tools supply chain and component obsolescence conducting plant safety evaluation Risk and value analysis can also be incorporated to indicate the optimum solution for the customer. Improvement of the profitability level Increase of the system lifetime Rolls-Royce can ensure these skills and capabilities are retained long-term, while also undertaking the management of stock and all necessary resources to guarantee the supply of material within agreed timescales. Rolls-Royce offers three levels of hardware maintenance: preventive maintenance corrective maintenance upgrade with requalification of the hardware piece each time Maximised profit Time VISIBILITY ON COSTS AND DEADLINE, IMPROVED SYSTEM AVAILABILITY.

4 Spare parts Technical assistance Nuclear power plant operators depend on the supply and provision of spare parts to ensure long-term safe, reliable and profitable operations. Parts supply in the short and medium term is potentially threatened by component obsolescence but Rolls-Royce can help you address this challenge by delivering a package of services that will ensure the delivery of replacement parts for up to 25 years. The package consists of a pre-determined list of spare parts defined with the customer, together with an obsolescence management package that anticipates and closely monitors the components market to come up with alternative solutions. Customers are able to adjust their requirements based on identified parts, price, availability and lead time. The package guarantees the availability of replacement parts for the customer, reducing the purchase order process. Rolls-Royce is able to provide in-factory technical support, helping customers with functional aspects of Rolls-Royce equipment, or direct assistance on the customer s own site, providing advice, expertise and diagnosis in a timely manner in the event of unexpected issues. Rolls-Royce technical assistance services aim to identify and plan for the required skills and training necessary to ensure the ongoing availability of qualified engineers to meet customer demands throughout the entire lifespan of the I&C systems. DELIVERING SUPPORT AND DIAGNOSIS TO ENHANCE THE OPERATION OF INSTALLED SYSTEMS. NUCLEAR UTILITIES DEPEND ON THE PROVISION OF REPLACEMENT PARTS TO ENSURE SAFE, RELIABLE AND LONG-TERM OPERATION.

5 Diagnostic expertise On-site maintenance As Rolls-Royce builds and maintains a detailed knowledge of each installed I&C system, we analyse and use the data to effectively and proactively manage the system, measure performance, diagnose in-service issues and predict and monitor component life. This level of working knowledge allows Rolls Royce to continuously improve products and systems and offers its customers the most reliable, predictable and consistent products and solutions available. UTILISING UNIQUE I&C EXPERIENCE, ROLLS-ROYCE HAS DEVELOPED A BREADTH OF EXPERTISE IN DIAGNOSING TECHNICAL PROBLEMS. As a world-leading provider of nuclear instrumentation and control, Rolls-Royce maintains a strong network of skilled service technicians including dedicated teams in France and China who are fully trained and equipped to support customers on site in maintaining I&C systems at each stage of their life-cycle. These technicians are capable of supporting on a wide range of maintenance operations, including preventive, corrective and predictive maintenance. DELIVERING SUPPORT AND DIAGNOSIS TO ENHANCE THE OPERATION OF INSTALLED SYSTEMS.

6 Training Rolls-Royce has developed a comprehensive range of training courses covering all products and systems. Introductory, update and refresher courses are provided for customer s employees covering the operational, maintenance or engineering aspects of Rolls-Royce I&C systems. The training courses include both theoretical and practical courses, which are customised and site-specific: the theoretical sessions include technical training programmes designed to provide utilities with a comprehensive understanding of Rolls-Royce equipment. practical sessions take place in a dedicated customer training centre that incorporates several dedicated training platforms covering technologies and systems installed by Rolls-Royce since the 1970s on the French fleet, such as: Reactor Protection System Neutron Instrumentation System Rod Control System Ex-core neutron detectors WITH 20 YEARS OF EXPERIENCE THAT INCLUDES A LARGE CLASS 1E INSTALLED BASE, WE DESIGN NUCLEAR LONG-TERM TRAINING AND SUPPORT SERVICES THAT IMPROVE YOUR OPERATIONAL SAFETY, SECURITY AND EFFICIENCY.

7 Case studies Service centres Managing the I&C systems of the largest nuclear fleet worldwide, 58 PWR reactors in France. EDF is the largest nuclear power utility worldwide, operating 58 nuclear reactors in France and 15 in United Kingdom. Rolls-Royce supplied the safety I&C for all 58 french reactors commissioned since the end of the 1970s to the present day. Since the 1990s, ageing hardware and obsolescence have become increasingly important issues for the French utility. A need was identified to secure repairs and the capabilities of supply chains for spare parts, so EDF and Rolls-Royce started to develop engineering and support services to meet life-cycle management issues. These fruitful discussions resulted in the first long-term support agreement in the early 2000s, the key strategic objectives of which were: to keep the equipment in operation for as long as possible to maintain a dedicated team for I&C safety to guarantee the availability of skills and tools for a longer period In 2003 EDF and Rolls-Royce signed the first long term agreement to ensure the maintenance of manufacturing, testing and repairing capabilities for both software and hardware elements, and at both component and system level for a specific time period. The main objective of this partnership has been to find solutions to the issue of hardware ageing through such means as failure rate reduction and obsolescence management, technology evolution, and the maintenance of skills and tools. ROLLS-ROYCE LONG TERM SUPPORT COVERS ALL TYPES OF FLEET SIZE. Long Term Support agreement for Dukovany NPP in Czech Republic (4 VVER reactors). Rolls-Royce has demonstrated its ability to adapt its longterm support offering to smaller fleets such as the 4 units at the Dukovany nuclear power plant operated by CEZ, with the support of I&C Energo in the Czech Republic. Signed in 2010, this long-term support agreement is an extension of the mutual trust built up between Rolls-Royce and its customer during a modernisation safety I&C project covering the four units, completed in Through the agreement, Rolls-Royce provides visibility of the systems evolution and handles all the obsolescence encountered on a pre-determined list of equipment, while CEZ is assured of parts availability and can operate the plant under cost-efficient conditions by keeping optimum control of the I&C budget. I&C Energo, in charge of plant maintenance, has access through the agreement to OEM experts for technical assistance, with responsiveness guaranteed thanks to a remote hotline and on-site consultancy. Centre of Excellence Grenoble - France For over 40 years, Rolls-Royce has supported the I&C systems of 200 nuclear reactors worldwide, including the entire French nuclear fleet, through its centre of excellence and competences in Grenoble. Our specialist engineers and technical experts have been involved in designing, manufacturing and renovating analogue and digital safety I&C systems for nuclear reactors of all types. These skilled technicians have unique experience in helping customers to improve plant reliability, availability and safety. In Grenoble, Rolls-Royce has developed a reputation for engineering excellence and has been at the forefront of innovation for over 40 years. Rolls-Royce developed and installed the world s first digital reactor protection system. ENSURING THE DELIVERY OF HIGH QUALITY, RESPONSIVE AND TIMELY SERVICES FOR ITS GLOBAL CUSTOMERS. Delivery centre Shenzhen - China Rolls-Royce supplies safety-critical nuclear instrumentation and core control I&C systems to more than 70 per cent of the nuclear reactors operating or under construction in China today, including all Chinese-designed reactors. In 2011, recognising this central role in China s nuclear industry, Rolls- Royce opened a new service centre in Shenzhen, Guangdong province, dedicated to the company s nuclear I&C business in China. This centre represents a major step up in presence and capacity by supporting all its Chinese customers on a long term basis with fully-qualified, high-quality services ensuring the safety and availability of nuclear power plants in the region. On-site maintenance and technical assistance are the prime services and solutions being provided for local customers in China.

8 A complete range of proven nuclear I&C solutions Rolls-Royce delivers a comprehensive suite of leading digital I&C systems, instrumentation and long-term services including: Digital Safety Systems class 1E - cat. A Spinline technology Reactor Protection System Engineered Safety Feature Actuation System Neutron Instrumentation System Diesel load sequencing system Digital Control & Monitoring Systems Rod Control System Rod Position Indication System Boron meter Reactivity meter Digital radiation monitoring system In-core instrumentation system Plant process computers Instrumentation & Hardware Neutron detectors Pressure transmitters Temperature probes Pressurised heater control Reactor trip breakers Customer Support On-site maintenance Obsolescence management Technical support Long-term customer support Training Repairs and spare parts Our I&C systems have been installed on 200 nuclear reactors in 20 countries.

9 Rolls-Royce Civil Nuclear SAS 23, Chemin du Vieux Chêne Meylan, France Tel: +33 (0) Fax: +33 (0) Rolls-Royce 994-A Explorer Blvd. Huntsville, AL 35B06 USA Tel: Fax: Rolls-Royce International Ltd. IBC Building, Pobrezni 3Prague , Czech Republic Tel: Fax: Rolls-Royce Commercial (Beijing) Co.,Ltd Shenzhen Branch Room1303, Building A, Genzon Times Square, Longgang Central City zone 9, Shenzhen , China Tel: Fax: Rolls-Royce Nuclear Engineering Services Technical Services 465 Malcolm Drive, Moon Twp, PA 15108, USA Tel: Contact: Rolls-Royce plc 2016 The information in this document is the property of Rolls-Royce plc and may not be copied, or communicated to a third party, or used, for any purpose other than that for which it is supplied without the express written consent of Rolls-Royce plc. While this information is given in good faith based upon the latest information available to Rolls-Royce plc, no warranty or representation is given concerning such information, which must not be taken as establishing any contractual or other commitment binding upon Rolls-Royce plc or any of its subsidiary or associated companies. Ref: RRN/MSB/02/16