Australian/New Zealand Standard
|
|
- Joy Peters
- 6 years ago
- Views:
Transcription
1 AS/NZS 4452:1997 Australian/New Zealand Standard The storage and handling of toxic substances
2 AS/NZS 4452:1997 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee CH/9, Safe Handling of Chemicals. It was approved on behalf of the Council of Standards Australia on 31 December 1996 and on behalf of the Council of Standards New Zealand on 23 December It was published on 5 March The following interests are represented on Committee CH/9: Air Conditioning and Refrigeration Wholesalers Association Australasian Railways Association Australian Chemical Specialties Manufacturers Association Australian Conservation Foundation Australian Council of Trade Unions Australian Fire Authorities Council Australian Government Analytical Laboratories Australian Institute of Petroleum Australian Paint Manufacturers Federation Department for Industrial Affairs, S.A. Department of Defence, Australia Department of Minerals and Energy, W.A. Environment Protection Authority of N.S.W. Institution of Engineers, Australia Insurance Council of Australia Melbourne Water Ministry of Health, New Zealand National Association for Crop Protection and Animal Health National Occupational Health and Safety Commission New Zealand Chemical Industry Council New Zealand Fire Service Plastics and Chemicals Industry Association Tranz Rail New Zealand Victorian WorkCover Authority Work Health Authority, N.T. WorkCover N.S.W. Workplace Standards Authority, Tasmania Additional interests participating in preparation of Standard: Agricultural and Veterinary Chemicals Association (AGSAFE) Institute of Public Health, N.S.W. New Zealand Department of Labour Manufacturers and users of toxic substances Consultants to the chemical industry Review of Standards. To keep abreast of progress in industry, Joint Australian/ New Zealand Standards are subject to periodic review and are kept up to date by the issue of amendments or new editions as necessary. It is important therefore that Standards users ensure that they are in possession of the latest edition, and any amendments thereto. Full details of all Joint Standards and related publications will be found in the Standards Australia and Standards New Zealand Catalogue of Publications; this information is supplemented each month by the magazines The Australian Standard and Standards New Zealand, which subscribing members receive, and which give details of new publications, new editions and amendments, and of withdrawn Standards. Suggestions for improvements to Joint Standards, addressed to the head office of either Standards Australia or Standards New Zealand, are welcomed. Notification of any inaccuracy or ambiguity found in a Joint Australian/New Zealand Standard should be made without delay in order that the matter may be investigated and appropriate action taken. This Standard was issued in draft form for comment as DR
3 AS/NZS 4452:1997 Australian/New Zealand Standard The storage and handling of toxic substances First published as AS/NZS 4452:1997. PUBLISHED JOINTLY BY: STANDARDS AUSTRALIA 1 The Crescent, Homebush NSW 2140 Australia STANDARDS NEW ZEALAND Level 10, Standards House, 155 The Terrace, Wellington 6001 New Zealand ISBN
4 AS/NZS 4452: PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee CH/9, Safe Handling of Chemicals. Preparation of the Standard was commenced following a request from the Australian Chemical Industry Council that a series of Standards be prepared on the storage and handling of dangerous goods. The objective of this Standard is to provide users of toxic substances with such requirements and recommendations for the storage and handling of those substances as are appropriate to the interests of safety of persons and property. This Standard deals with dangerous goods of Class 6.1, as classified in the UN Recommendations on the Transport of Dangerous Goods, the ADG Code and the IMDG Code. In New Zealand, this Standard also applies to those substances that meet the criteria of Schedules 1 4 of the New Zealand Toxic Substances Regulations The series of Standards covering the storage and handling of dangerous goods presently comprises the following Standards: AS 1596 LP Gas Storage and handling 1894 Code of practice for the safe handling of cryogenic fluids 1940 The storage and handling of flammable and combustible liquids 2022 Anhydrous Ammonia Storage and handling (known as the SAA Anhydrous Ammonia Code) 2507 The storage and handling of pesticides 2714 The storage and handling of hazardous chemical materials Class 5.2 substances (organic peroxides) 2927 The storage and handling of liquefied chlorine gas 3780 The storage and handling of corrosive substances 3961 Liquefied natural gas Storage and handling 4081 The storage, handling and transport of liquid and liquefied polyfunctional isocyanates 4326 The storage and handling of oxidizing agents 4332 The storage and handling of gases in cylinders The Committee does not suggest that any of the provisions of this Standard are retrospective; however, users should check with the relevant statutory authority where this Standard has been adopted through legislation. Attention has been paid to the alignment of requirements with the current needs of regulatory authorities, emergency services and environmental authorities, and cognizance has been taken of various publications of Worksafe Australia. Australian and New Zealand references are separated by a slash (/). The terms normative and informative have been used in this Standard to define the application of appendices to which they apply. A normative appendix is an integral part of a Standard, whereas an informative appendix is for information and guidance only. Statements expressed in mandatory terms in notes to tables are deemed to be requirements of this Standard. Notes that appear in the main text of this Standard provide information only.
5 3 AS/NZS 4452:1997 CONTENTS Page SECTION 1 SCOPE AND GENERAL 1.1 SCOPE APPLICATION NEWDESIGNSANDINNOVATIONS REFERENCEDDOCUMENTS DEFINITIONS PACKAGING LABELLING SECURITYOFSTORAGEAREAS SEPARATIONANDSEGREGATION SECTION 2 MINOR STORAGE 2.1 SCOPEOFSECTION CRITERIA FOR CLASSIFICATION AS MINOR STORAGE REQUIREMENTSAPPLICABLETOMINORSTORAGE STORAGE ON FARMS SECTION 3 TRANSIT STORAGE 3.1 SCOPEOFSECTION DELINEATIONOFTRANSITSTORAGEAREAS REQUIREMENTSFORTRANSITSTORAGE SECTION 4 STORAGE AND HANDLING OF PACKAGES 4.1 SCOPEOFSECTION TYPES OF PACKAGE STORES LOCATIONOFSTORE GENERALREQUIREMENTSFORPACKAGESTORES REQUIREMENTS FOR PACKAGE FILLING OPERATIONS SECTION 5 STORAGE AND HANDLING IN BULK 5.1 SCOPEOFSECTION GENERAL CONTAINERTYPES DESIGN AND CONSTRUCTION REQUIREMENTS APPLICABLE TO ALL BULK CONTAINER INSTALLATION S ADDITIONAL REQUIREMENTS FOR PORTABLE BULK CONTAIN ERS ADDITIONAL REQUIREMENTS FOR FIXED TANKS BUNDSANDCOMPOUNDS LOCATION OF BULK CONTAINERS FILLING OF BULK CONTAINERS SECTION 6 OPERATION AL AND PERSONNEL SAFETY 6.1 SCOPEOFSECTION GENERALPRECAUTIONS CONTROLOFEXPOSURE HOUSEKEEPING... 31
6 AS/NZS 4452: Page 6.5 EFFLUENTCONTROL CONSTRUCTIONANDMAINTENANCEWORK PERSONNELTRAINING PERSONALPROTECTIVEEQUIPMENT FIRSTAID SECTION 7 EMERGENCY MANAGEMENT 7.1 SCOPEOFSECTION PLANNINGFOREMERGENCIES MANIFEST PLACARDING MANAGEMENTOFLEAKSANDSPILLS SECTION 8 FIRE PROTECTION 8.1 SCOPEOFSECTION GENERALCONSIDERATIONS FIREPROTECTIONMEASURES ACTIONINTHEEVENTOFFIRE SECTION 9 WASTE STORAGE AND DISPOSAL 9.1 SCOPEOFSECTION STORAGEOFWASTES ITEMSFORDISPOSAL PRE-DISPOSALTREATMENTOFEMPTYCONTAINERS METHODSOFDISPOSAL APPENDICES A HAZARDS PRESENTED BY TOXIC SUBSTANCES B LISTOFREFERENCEDDOCUMENTS C EXAMPLE OF CALCULATION OF SEPARATION DISTANCE D OPERATINGPROCEDURES E FIRST AID RESPONSE FOR TOXIC SUBSTANCES F BIBLIOGRAPHY OF DOCUMENTS PROVIDING GUIDELINES ON THE PREPARATION OF EMERGENCY PLANS G INFORMATION TO BE PROVIDED TO EMERGENCY SERVICES Copyright STANDARDS AUSTRALIA/ STANDARDS NEW ZEALAND Users of Standards are reminded that copyright subsists in all Standards Australia and Standards New Zealand publications and software. Except where the Copyright Act allows and except where provided for below no publications or software produced by Standards Australia or Standards New Zealand may be reproduced, stored in a retrieval system in any form or transmitted by any means without prior permission in writing from Standards Australia or Standards New Zealand. Permission may be conditional on an appropriate royalty payment. Australian requests for permission and information on commercial software royalties should be directed to the head office of Standards Australia. New Zealand requests should be directed to Standards New Zealand. Up to 10 percent of the technical content pages of a Standard may be copied for use exclusively in-house by purchasers of the Standard without payment of a royalty or advice to Standards Australia or Standards New Zealand. Inclusion of copyright material in computer software programs is also permitted without royalty payment provided such programs are used exclusively in-house by the creators of the programs. Care should be taken to ensure that material used is from the current edition of the Standard and that it is updated whenever the Standard is amended or revised. The number and date of the Standard should therefore be clearly identified. The use of material in print form or in computer software programs to be used commercially, with or without payment, or in commercial contracts is subject to the payment of a royalty. This policy may be varied by Standards Australia or Standards New Zealand at any time.
7 5 AS/NZS 4452:1997 STANDARDS AUSTRALIA/STANDARDS NEW ZEALAND Australian/New Zealand Standard The storage and handling of toxic substances SECTION 1 SCOPE AND GENERAL 1.1 SCOPE This Standard sets out requirements and recommendations for the safe storage and handling of toxic substances that (a) in Australia, are classified as Class 6.1 in the ADG Code; and (b) in New Zealand, meet the Class 6.1 classification criteria of the IMDG Code or Schedules 1 4 of the New Zealand Toxic Substances Regulations The Standard also applies to other dangerous goods that are assigned a Class 6.1 subsidiary risk by the ADG Code/IMDG Code, except where they are of Class 2, or where more stringent requirements apply under another relevant Standard or applicable regulation. This Standard applies in locations that are generally industrial, commercial or rural in nature, including laboratories where the provisions of this Standard are additional to those of AS Where there is conflict between the requirements of this Standard and AS , this Standard shall take precedence. This Standard does not apply to (i) the transport on land of toxic substances, which is covered by the ADG Code/NZS 5433; or (ii) storage in port areas. NOTE: Information on the hazards presented by toxic substances is provided in Appendix A. In New Zealand any toxic substance that falls outside the UN criteria for Packing Groups shall be treated as if it were of Packing Group III. 1.2 APPLICATION The requirements of this Standard apply in conjunction with, but do not take precedence over, any government regulations that apply in any area. Where the toxic substance being kept has one or more Subsidiary Risks, reference shall be made to the Australian Standards relevant to the classes of those risks and the more stringent requirements shall apply. NOTE: Where no Australian Standard applies for a particular Subsidiary Risk, reference should be made to the relevant regulatory authority. Where polyfunctional isocyanates are kept, reference to AS 4081 shall also be made and the more stringent requirements shall apply. NOTES: 1 In Australia, toxic substances that are classified as dangerous goods may also be classified as workplace hazardous substances by NOHSC:1008 and listed in NOHSC: As such they will also be subject to the legislative requirements relating to workplace hazardous substances. Cognizance of the relevant requirements of the Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) is also necessary. 2 An installation may come under the regulatory control of several authorities having differing areas of responsibility, and an approval from one authority does not necessarily constitute an approval from the others. 3 Cognizance of the relevant requirements of the Building Code of Australia (BCA)/New Zealand Building Code (NZBC) is necessary for all matters relating to building works. COPYRIGHT
8 The remainder of this document is available for purchase online at SAI Global also carries a wide range of publications from a wide variety of Standards Publishers: Click on the logos to search the database online.
Australian/New Zealand Standard
AS/NZS 4681:2000 (Incorporating Amendment No. 1) AS/NZS 4681 Australian/New Zealand Standard The storage and handling of Class 9 (miscellaneous) dangerous goods and articles AS/NZS 4681:2000 This Joint
More informationAustralian Standard. The storage and handling of flammable and combustible liquids AS (Incorporating Amendment Nos 1 and 2) AS
AS 1940 2004 (Incorporating Amendment Nos 1 and 2) AS 1940 2004 Australian Standard The storage and handling of flammable and combustible liquids This Australian Standard was prepared by Committee ME-017,
More informationAS Australian Standard. The storage and handling of corrosive substances. This is a free 7 page sample. Access the full version online.
AS 3780 1994 Australian Standard The storage and handling of corrosive substances This Australian Standard was prepared by Committee CH/9, Safe Handling of Chemicals. It was approved on behalf of the Council
More informationAustralian Standard. Guide to the sampling of particulate materials. Part 1: Sampling procedures AS
AS 4433.1 1997 Australian Standard Guide to the sampling of particulate materials Part 1: Sampling procedures This Australian Standard was prepared by Committee MN/10, Sampling of Minerals. It was approved
More informationAustralian Standard. Explosives Storage, transport and use. Part 1: Storage AS
AS 2187.1 1998 Australian Standard Explosives Storage, transport and use Part 1: Storage This Australian Standard was prepared by Committee CE/5, Explosives. It was approved on behalf of the Council of
More informationAustralian/New Zealand Standard
AS/NZS 4386.1:1996 Australian/New Zealand Standard Domestic kitchen assemblies Part 1: Kitchen units AS/NZS 4386.1:1996 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
More informationAustralian Standard. Medical refrigeration equipment For the storage of blood and blood products AS
AS 3864 1997 Australian Standard Medical refrigeration equipment For the storage of blood and blood products This Australian Standard was prepared by Committee HT/10, Medical Refrigeration. It was approved
More informationAustralian Standard. Thermal insulation of dwellings Bulk insulation Installation requirements AS
AS 3999 1992 Australian Standard Thermal insulation of dwellings Bulk insulation Installation requirements This Australian Standard was prepared by Committee BD/58, Thermal performance and Insulation of
More informationSAA ANHYDROUS AMMONIA CODE
AS 2022 1983 Australian Standard SAA ANHYDROUS AMMONIA CODE This Australian standard was prepared by Committee ME/32, Anhydrous Ammonia. It was approved on behalf of the Council of the Standards Association
More informationAustralian Standard. Acoustics Road traffic noise intrusion Building siting and construction AS
AS 3671 1989 Australian Standard Acoustics Road traffic noise intrusion Building siting and construction This Australian Standard was prepared by Committee AV/5, Acoustics Community Noise. It was approved
More informationAS Australian Standard STEEL LADDERS FOR SHIPS VERTICAL LADDERS. This is a free 5 page sample. Access the full version online.
AS 1035 1983 Australian Standard STEEL LADDERS FOR SHIPS VERTICAL LADDERS This Australian standard was prepared by Committee MS/22, Shipbuilding. It was approved on behalf of the Council of the Standards
More informationAustralian Standard. Non-destructive testing Radiography of welded butt joints in metal. Part 1: Methods of test AS
AS 2177.1 1994 Australian Standard Non-destructive testing Radiography of welded butt joints in metal Part 1: Methods of test This Australian Standard was prepared by Committee MT/7, Non-destructive Testing
More informationAustralian/New Zealand Standard
Australian/New Zealand Standard Quality systems Model for quality assurance in final inspection and test This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee QR/8, Quality
More informationAustralian Standard. Methods for determination of sound transmission class and noise isolation class of building partitions AS
AS 1276 1979 Australian Standard Methods for determination of sound transmission class and noise isolation class of building partitions The following scientific, industrial and governmental organizations
More informationAustralian Standard. Part 3 SEAT INDEX POINT AS /ISO EARTH-MOVING MACHINERY HUMAN DIMENSIONS
AS 2953.3 1988/ISO 5353 1978 Australian Standard EARTH-MOVING MACHINERY HUMAN DIMENSIONS Part 3 SEAT INDEX POINT (ISO Title: Earth-moving machinery and tractors and machinery for agriculture and forestry
More informationAustralian/New Zealand Standard
AS/NZS 3598:2000 AS/NZS 3598 Australian/New Zealand Standard Energy audits AS/NZS 3598:2000 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee EN/1, Energy Auditing. It
More informationAustralian Standard. Sampling procedures and charts for inspection by variables for percent nonconforming AS ISO 3951:1989
AS 24901997 ISO 3951:1989 Australian Standard Sampling procedures and charts for inspection by variables for percent nonconforming This Australian Standard was prepared by Committee QR/4, Statistical Quality
More informationAS Australian Standard. Piling Design and installation. This is a free 8 page sample. Access the full version online.
AS 2159 1995 Australian Standard Piling Design and installation This Australian Standard was prepared by Committee CE/18, Piling. It was approved on behalf of the Council of Standards Australia on 31 May
More informationAustralian Standard. Specification for general purpose corrugated fibreboard boxes and blanks AS
AS 3537 1998 Australian Standard Specification for general purpose corrugated fibreboard boxes and blanks This Australian Standard was prepared by Committee PK/5, Fibreboard Boxes. It was approved on behalf
More informationAustralian Standard. Certification of welders and welding supervisors. AS (Incorporating Amendment No. 1) AS 1796
AS 1796 2001 (Incorporating Amendment No. 1) AS 1796 Australian Standard Certification of welders and welding supervisors This Australian Standard was prepared by Committee ME-001, Pressure Equipment.
More informationAustralian Standard. Cast grey and ductile iron non-pressure pipes and fittings AS
AS 1631 1994 Australian Standard Cast grey and ductile iron non-pressure pipes and fittings This Australian Standard was prepared by Committee WS/5, Cast Iron Pipes and Fittings (Non-pressure Type). It
More informationAustralian Standard. Pressure equipment Examination and testing AS Reconfirmed 2016
AS 4037 1999 Reconfirmed 2016 Australian Standard Pressure equipment Examination and testing This Australian Standard was prepared by Committee ME/1, Pressure Equipment. It was approved on behalf of the
More informationAustralian/New Zealand Standard
AS/NZS 4766:2006 AS/NZS 4766:2006 Australian/New Zealand Standard Polyethylene storage tanks for water and chemicals AS/NZS 4766:2006 This Joint Australian/New Zealand Standard was prepared by Joint Technical
More informationAustralian Standard. Pressure vessels. AS (Incorporating Amendment Nos. 1, 2 and 3) AS 1210
AS 1210 1997 (Incorporating Amendment Nos. 1, 2 and 3) AS 1210 Australian Standard Pressure vessels This Australian Standard was prepared by Committee ME-001, Pressure Equipment. It was approved on behalf
More informationAustralian/New Zealand Standard
AS/NZS 4417.1 Australian/New Zealand Standard Marking of electrical products to indicate compliance with regulations Part 1: General rules for use of the mark This Joint Australian/New Zealand Standard
More informationAustralian/New Zealand Standard
AS/NZS 1546.2 Australian/New Zealand Standard On-site domestic wastewater treatment units Part 2: Waterless composting toilets This Joint Australian/New Zealand Standard was prepared by Joint Technical
More informationAS This is a free 6 page sample. Access the full version online. Australian Standard. Headstones and cemetery monuments
AS 4204 1994 Australian Standard Headstones and cemetery monuments This Australian Standard was prepared by Committee BD/71, Cemetery Monuments. It was approved on behalf of the Council of Standards Australia
More informationAustralian/New Zealand Standard
AS/NZS 4576:1995 Australian/New Zealand Standard Guidelines for scaffolding AS/NZS 4576:1995 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee BD/36, Scaffolding. It
More informationAustralian/New Zealand Standard
AS/NZS 1576.6 Australian/New Zealand Standard Scaffolding Part 6: Metal tube-and-coupler scaffolding Deemed to comply with AS/NZS 1576.3 This Joint Australian/New Zealand Standard was prepared by Joint
More informationAustralian Standard. Guidelines for the selection of quality management system consultants and use of their services AS ISO ISO 10019:2005
AS ISO 10019 2005 ISO 10019:2005 AS ISO 10019 2005 Australian Standard Guidelines for the selection of quality management system consultants and use of their services This Australian Standard was prepared
More informationAustralian Standard. Pipelines Gas and liquid petroleum. Part 0: General requirements AS AS
AS 2885.0 2008 AS 2885.0 2008 Australian Standard Pipelines Gas and liquid petroleum Part 0: General requirements This Australian Standard was prepared by Committee ME-038, Petroleum Pipelines. It was
More informationAustralian/New Zealand Standard
AS/NZS 1665:2004 AS/NZS 1665 Australian/New Zealand Standard Welding of aluminium structures AS/NZS 1665:2004 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee WD-003,
More informationAustralian/New Zealand Standard
AS/NZS 3666.3:2000 AS/NZS 3666.3 Australian/New Zealand Standard Air-handling and water systems of buildings Microbial control Part 3: Performance-based maintenance of cooling water systems AS/NZS 3666.3:2000
More informationAustralian/New Zealand Standard
AS/NZS 1546.2:2008 AS/NZS 1546.2:2008 Australian/New Zealand Standard On-site domestic wastewater treatment units Part 2: Waterless composting toilets AS/NZS 1546.2:2008 This Joint Australian/New Zealand
More informationAS/NZS :2015
AS/NZS 4024.3611:2015 Australian/New Zealand Standard Safety of machinery Part 3611: Conveyors Belt conveyors for bulk materials handling AS/NZS 4024.3611:2015 AS/NZS 4024.3611:2015 This joint Australian/New
More informationAustralian/New Zealand Standard
AS/NZS 4859.1:2002 (Incorporating Amendment No. 1) AS/NZS 4859.1:2002 Australian/New Zealand Standard Materials for the thermal insulation of buildings Part 1: General criteria and technical provisions
More informationAustralian/New Zealand Standard
AS/NZS 3598.1:2014 AS/NZS 3598.1:2014 Australian/New Zealand Standard Energy audits Part 1: Commercial buildings AS/NZS 3598.1:2014 This Joint Australian/New Zealand Standard was prepared by Joint Technical
More informationAustralian Standard. Metal finishing Thermoset powder coatings for architectural applications of aluminium and aluminium alloys AS AS 3715
AS 3715 2002 AS 3715 Australian Standard Metal finishing Thermoset powder coatings for architectural applications of aluminium and aluminium alloys This Australian Standard was prepared by Committee MT-009,
More informationAS AS Australian Standard. Metal finishing Thermoset powder coatings
AS 4506 2005 AS 4506 2005 Australian Standard Metal finishing Thermoset powder coatings This Australian Standard was prepared by Committee MT-009, Metal Finishing. It was approved on behalf of the Council
More informationAS AS Australian Standard. Wear-resistant white cast iron. This is a free 6 page sample. Access the full version online.
AS 2027 2002 AS 2027 Australian Standard Wear-resistant white cast iron This Australian Standard was prepared by Committee MT-001, Iron and Steel. It was approved on behalf of the Council of Standards
More informationAustralian Standard. Metal castings. Part 1: Ferrous sand moulded AS (Incorporating Amendment No. 1) AS
AS 4738.1 2004 (Incorporating Amendment No. 1) AS 4738.1 2004 Australian Standard Metal castings Part 1: Ferrous sand moulded This Australian Standard was prepared by Committee MT-001, Iron and Steel.
More informationAustralian Standard. Non-destructive testing Determination of thickness. Part 3: Use of ultrasonic testing AS AS 2452.
AS 2452.3 2005 AS 2452.3 2005 Australian Standard Non-destructive testing Determination of thickness Part 3: Use of ultrasonic testing This Australian Standard was prepared by Committee MT-007, Non-destructive
More informationAS/NZS 4804:2001. Occupational health and safety management systems. General guidelines on principles, systems and supporting techniques
Australian/New Zealand Standard Occupational health and safety management systems General guidelines on principles, systems and supporting techniques This Joint Australian/New Zealand Standard was prepared
More informationAS/NZS :2015. Scaffolding AS/NZS :2015. Part 3: Prefabricated and tube-and-coupler scaffolding. Australian/New Zealand Standard
AS/NZS 1576.3:2015 Australian/New Zealand Standard Scaffolding Part 3: Prefabricated and tube-and-coupler scaffolding Superseding AS/NZS 1576.3:1995 AS/NZS 1576.3:2015 AS/NZS 1576.3:2015 This joint Australian/New
More informationAS/NZS 4505:1998 AS/NZS
AS/NZS 4505:2012 Incorporating Amendment No. 1 Australian/New Zealand Standard Garage doors and other large access doors Superseding AS/NZS 4505:1998 AS/NZS 4505:2012 AS/NZS 4505:2012 This Joint Australian/New
More informationAS/NZS 3012:2003 AS/NZS
AS/NZS 3012:2010 Incorporating Amendment No. 1 Australian/New Zealand Standard Electrical installations Construction and demolition sites Superseding AS/NZS 3012:2003 AS/NZS 3012:2010 AS/NZS 3012:2010
More informationAustralian Standard. Atmospheric corrosivity zones in Australia AS AS
AS 4312 2008 AS 4312 2008 Australian Standard Atmospheric corrosivity zones in Australia This Australian Standard was prepared by Committee MT-014, Corrosion of Metals. It was approved on behalf of the
More informationAustralian/New Zealand Standard
AS/NZS 4819:2011 AS/NZS 4819:2011 Australian/New Zealand Standard Rural and urban addressing AS/NZS 4819:2011 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee IT-004,
More informationAustralian Standard. Power transformers. Part 1.2: Minimum Energy Performance Standard (MEPS) requirements for distribution transformers
AS 2374.1.2 2003 (Incorporating Amendment No. 1) AS 2374.1.2 2003 Australian Standard Power transformers Part 1.2: Minimum Energy Performance Standard (MEPS) requirements for distribution transformers
More informationAustralian/New Zealand Standard
AS/NZS 3580.1.1:2007 AS/NZS 3580.1.1:2007 Australian/New Zealand Standard Methods for sampling and analysis of ambient air Part 1.1: Guide to siting air monitoring equipment AS/NZS 3580.1.1:2007 This Joint
More informationAS/NZS :2016. High-strength steel fastener assemblies for structural engineering Bolts, nuts and washers AS/NZS :2016
Australian/New Zealand Standard AS/NZS 1252.2:2016 High-strength steel fastener assemblies for structural engineering Bolts, nuts and washers Part 2: Verification testing for bolt assemblies Superseding
More informationAS/NZS ISO 9004:2011 Managing for the sustained success of an organization A quality management approach
AS/NZS ISO 9004:2011 Managing for the sustained success of an organization A quality management approach AS/NZS ISO 9004:2011 This Joint Australian/New Zealand Standard was prepared by Joint Technical
More informationAustralian/New Zealand Standard
AS/NZS 1170.2:2002 (Incorporating Amendment No. 1) AS/NZS 1170.2:2002 Australian/New Zealand Standard Structural design actions Part 2: Wind actions AS/NZS 1170.2:2002 This Joint Australian/New Zealand
More informationAustralian/New Zealand Standard
AS/NZS ISO 9001:2008 ISO 9001:2008 (Incorporating Amendment No. 1) AS/NZS ISO 9001:2008 Australian/New Zealand Standard Quality management systems Requirements AS/NZS ISO 9001:2008 This Joint Australian/New
More informationRisk management Principles and guidelines
AS/NZS ISO 31000:2009 Joint Australian New Zealand International Standard Risk management Principles and guidelines Superseding AS/NZS 4360:2004 AS/NZS ISO 31000:2009 AS/NZS ISO 31000:2009 This Joint Australian/New
More informationAS/NZS 3010:2005 AS/NZS
AS/NZS 3010:2017 Australian/New Zealand Standard Electrical installations Generating sets Superseding AS/NZS 3010:2005 AS/NZS 3010:2017 AS/NZS 3010:2017 This joint Australian/New Zealand standard was prepared
More informationAustralian/New Zealand Standard
AS/NZS 4761.1:2003 (Incorporating Amendment No. 1) AS/NZS 4761.1 Australian/New Zealand Standard Competencies for working with electrical equipment for hazardous areas (EEHA) Part 1: Competency Standards
More informationAustralian/New Zealand Standard
AS/NZS 1170.1:2002 (Incorporating Amendment Nos 1 and 2) AS/NZS 1170.1:2002 Australian/New Zealand Standard Structural design actions Part 1: Permanent, imposed and other actions AS/NZS 1170.1:2002 This
More informationAS/NZS :2014. Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings AS/NZS 2312.
Australian/New Zealand Standard AS/NZS 2312.1:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings Part 1: Paint coatings Superseding AS/NZS
More informationAustralian Standard. Design and installation of sheet roof and wall cladding. Part 3: Plastic AS AS
AS 1562.3 2006 AS 1562.3 2006 Australian Standard Design and installation of sheet roof and wall cladding Part 3: Plastic This Australian Standard was prepared by Committee PL-022, Plastic Building Sheets.
More informationHazardous Chemicals, Dangerous Goods and Explosives Storage and Transport Procedure
Hazardous Chemicals, Dangerous Goods and Explosives Storage and Transport Procedure Related Policy Work Health and Safety Policy Responsible Officer Executive Director Human Resources Approved by Executive
More informationAustralian Standard. Qualification of welders for fusion welding of steels AS AS
AS 2980 2004 AS 2980 2004 Australian Standard Qualification of welders for fusion welding of steels This Australian Standard was prepared by Committee WD-003, Welding of Structures. It was approved on
More informationAustralian Standard. Guide to the investigation and sampling of sites with potentially contaminated soil
AS 4482.1 2005 AS 4482.1 2005 Australian Standard Guide to the investigation and sampling of sites with potentially contaminated soil Part 1: Non-volatile and semi-volatile compounds This Australian Standard
More informationAS/NZS 10002:2014. Australian/New Zealand Standard. Guidelines for complaint management in organizations AS/NZS 10002:2014
AS/NZS 10002:2014 Australian/New Zealand Standard Guidelines for complaint management in organizations AS/NZS 10002:2014 AS/NZS 10002:2014 This joint Australian/New Zealand standard was prepared by Joint
More informationAustralian/New Zealand Standard
AS/NZS 4761.1:2008 AS/NZS 4761.1:2008 Australian/New Zealand Standard Competencies for working with electrical equipment for hazardous areas (EEHA) Part 1: Competency Standards AS/NZS 4761.1:2008 This
More informationDangerous Goods Safety Guidance Note. Licensing and exemptions for storage and handling
Dangerous Goods Safety Guidance Note Licensing and exemptions for storage and handling April 2012 Level 1, 303 Sevenoaks Street (cnr Grose Ave), Cannington WA 6107 Postal address: Mineral House, 100 Plain
More informationAustralian/New Zealand Standard
AS/NZS 4755.3.1:2012 AS/NZS 4755.3.1:2012 Australian/New Zealand Standard Demand response capabilities and supporting technologies for electrical products Part 3.1: Interaction of demand response enabling
More informationAS/NZS 2589:2007 AS/NZS
AS/NZS 2589:2017 Australian/New Zealand Standard Gypsum linings Application and finishing Superseding AS/NZS 2589:2007 AS/NZS 2589:2017 AS/NZS 2589:2017 This joint Australian/New Zealand standard was prepared
More informationAS/NZS ISO 9001:2016. Quality management systems Requirements AS/NZS ISO 9001:2016. Australian/New Zealand Standard. Superseding AS/NZS ISO 9001:2008
AS/NZS ISO 9001:2016 (ISO 9001:2015, IDT) Australian/New Zealand Standard Quality management systems Requirements Superseding AS/NZS ISO 9001:2008 AS/NZS ISO 9001:2016 AS/NZS ISO 9001:2016 This joint Australian/New
More informationRISK MANAGEMENT GUIDELINES
HB 436:2004 RISK MANAGEMENT GUIDELINES HB 436:2004 (Incorporating Amendment No. 1) Handbook Risk Management Guidelines Originated as HB 142 1999 and HB 143:1999. Jointly revised and redesignated as HB
More informationAS/NZS :2016. High-strength steel fastener assemblies for structural engineering Bolts, nuts and washers AS/NZS :2016
Australian/New Zealand Standard AS/NZS 1252.1:2016 High-strength steel fastener assemblies for structural engineering Bolts, nuts and washers Part 1: Technical requirements Superseding in part AS/NZS 1252:1996
More informationAustralian Standard. Cement mortar lining of steel pipes and fittings AS AS 1281
AS 1281 2001 AS 1281 Australian Standard Cement mortar lining of steel pipes and fittings This Australian Standard was prepared by Committee WS-009, Rolled and Welded Steel Pipes. It was approved on behalf
More informationAsset management Management systems Requirements
ISO 55001:2014 AS ISO 55001:2014 Asset management Management systems Requirements This Australian Standard was prepared by Committee MB-019, Asset Management. It was approved on behalf of the Council of
More informationAS/NZS :2012. Specification for preservative treatment AS/NZS :2012. Part 3: Plywood. Australian/New Zealand Standard
AS/NZS 1604.3:2012 Incorporating Amendment No. 1 Australian/New Zealand Standard Specification for preservative treatment Part 3: Plywood Superseding AS/NZS 1604.3:2010 AS/NZS 1604.3:2012 AS/NZS 1604.3:2012
More informationAS AS Australian Standard. Chain-link fabric security fences and gates. This is a free 7 page sample. Access the full version online.
AS 1725 2003 AS 1725 Australian Standard Chain-link fabric security fences and gates This Australian Standard was prepared by Committee CE-008, Chainwire Security Fencing. It was approved on behalf of
More informationMANIFEST OF HAZARDOUS CHEMICALS
Purpose MANIFEST OF HAZARDOUS CHEMICALS AND DANGEROUS GOODS Locations storing agricultural and veterinary chemicals in packages and IBCs need to clearly understand the risks involved to ensure that correct
More informationAS/NZS :2003. Plumbing and drainage AS/NZS :2003. Australian/New Zealand Standard. Part 3: Stormwater drainage
AS/NZS 3500.3:2003 Incorporating Amendment Nos 1, 2, and 3 Australian/New Zealand Standard Plumbing and drainage Part 3: Stormwater drainage AS/NZS 3500.3:2003 AS/NZS 3500.3:2003 This Joint Australian/New
More informationDangerous Substances Handling, Use and Storage Policy
Relevant UTAS Ordinance, Rule and/or GLP No. Relevant State/Federal Govt. Legislation Commencement Date December, 2009 Governance Level Principle No. 6 Occupational Health & Safety Workplace Health and
More informationElectrical installations Marinas and boats
AS/NZS 3004.2:2014 Incorporating Amendment No. 1 Australian/New Zealand Standard Electrical installations Marinas and boats Part 2: Boat installations Superseding AS/NZS 3004.2:2008 AS/NZS 3004.2:2014
More informationAS/NZS ISO 9000:2000 Quality management systems Fundamentals and vocabulary
AS/NZS ISO 9000:2000 Quality management systems Fundamentals and vocabulary AS/NZS ISO 9000:2000 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee QR-008, Quality Management
More informationAS AS Australian Standard. Installation of nailplated timber roof trusses
AS 4440 2004 AS 4440 Australian Standard Installation of nailplated timber roof trusses This Australian Standard was prepared by Committee TM-002, Timber Framing. It was approved on behalf of the Council
More informationAS/NZS :2003. Structural design actions AS/NZS :2003. Part 3: Snow and ice actions. Australian/New Zealand Standard
AS/NZS 1170.3:2003 Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Structural design actions Part 3: Snow and ice actions Superseding in part NZS 4203:1992 AS/NZS 1170.3:2003 AS/NZS
More informationAustralian Standard. Sampling procedures for inspection by attributes
AS 1199.1 2003 ISO 2859-1:1999 AS 1199.1 Australian Standard Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
More informationAS/NZS 2280:2012 AS/NZS
AS/NZS 2280:2014 Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Ductile iron pipes and fittings Superseding AS/NZS 2280:2012 AS/NZS 2280:2014 AS/NZS 2280:2014 This joint Australian/New
More informationAustralian Standard. Meters for water supply. Part 4: In-service compliance testing AS AS
AS 3565.4 2007 AS 3565.4 2007 Australian Standard Meters for water supply Part 4: In-service compliance testing This Australian Standard was prepared by Committee WS-024, Water Meters. It was approved
More informationTechnical Specification
ISO/TS 9002:2016 SA TS ISO 9002:2017 Technical Specification Quality management systems Guidelines for the application of ISO 9001:2015 This Australian Technical Specification was prepared by Committee
More informationDangerous Goods (Storage and Handling) Regulations 2000 and Code of Practice
Dangerous Goods (Storage and Handling) Regulations 2000 and Code of Practice Fact Sheet Introduction The Dangerous Goods (Storage and Handling) Regulations 2000 came into effect on 5 December 2000 and
More informationAS/NZS 5131:2016. Australian/New Zealand Standard. Structural steelwork Fabrication and erection AS/NZS 5131:2016
AS/NZS 5131:2016 Australian/New Zealand Standard Structural steelwork Fabrication and erection AS/NZS 5131:2016 AS/NZS 5131:2016 This joint Australian/New Zealand standard was prepared by joint Technical
More informationAustralian Standard. Electroplated coatings of rhodium for general engineering applications AS AS 2429
AS 2429 2004 AS 2429 Australian Standard Electroplated coatings of rhodium for general engineering applications This Australian Standard was prepared by Committee MT-009, Metal Finishing. It was approved
More informationSocietal security Business continuity management systems Guidance
ISO 22313:2012 AS ISO 22313:2017 Societal security Business continuity management systems Guidance This Australian Standard was prepared by Committee MB-025, Security and Resilience. It was approved on
More informationAS/NZS 1477:2017. Australian/New Zealand Standard. PVC pipes and fittings for pressure applications. Superseding AS/NZS 1477:2006 AS/NZS 1477:2017
AS/NZS 1477:2017 Australian/New Zealand Standard PVC pipes and fittings for pressure applications Superseding AS/NZS 1477:2006 AS/NZS 1477:2017 AS/NZS 1477:2017 This joint Australian/New Zealand standard
More informationThis is a free 15 page sample. Access the full version online. HB 90.1:2012 The Small Business Handbook Guide to ISO 9001:2008
This is a free 15 page sample. Access the full version online. HB 90.1:2012 The Small Business Handbook Guide to ISO 9001:2008 HB This is a free 15 page sample. Access the full version online. HB 90.1:2012
More informationWaters Examination for Legionella spp. including Legionella pneumophila
AS 3896:2017 AS 3896:2017 Waters Examination for Legionella spp. including Legionella pneumophila This Australian Standard was prepared by Committee FT-020, Water Microbiology. It was approved on behalf
More informationAustralian Standard. Equipment for the pasteurization of milk and other liquid dairy products Continuous-flow systems AS AS 3993
AS 3993 2003 AS 3993 Australian Standard Equipment for the pasteurization of milk and other liquid dairy products Continuous-flow systems This Australian Standard was prepared by Committee FT-012, Dairy
More informationAsset management Overview, principles and terminology
ISO 55000:2014 AS ISO 55000:2014 Asset management Overview, principles and terminology This Australian Standard was prepared by Committee MB-019, Asset Management. It was approved on behalf of the Council
More informationAustralian/New Zealand Standard
AS/NZS 1100.501:2002 AS/NZS 1100.501 Australian/New Zealand Standard Technical drawing Part 501: Structural engineering drawing AS/NZS 1100.501:2002 This Joint Australian/New Zealand Standard was prepared
More informationAustralian/New Zealand Standard
AS/NZS 3666.1:2011 AS/NZS 3666.1:2011 Australian/New Zealand Standard Air-handling and water systems of buildings Microbial control Part 1: Design, installation and commissioning AS/NZS 3666.1:2011 This
More informationAustralian Standard. Interchange of client information AS (Incorporating Amendment No. 1) AS
AS 4590 2006 (Incorporating Amendment No. 1) AS 4590 2006 Australian Standard Interchange of client information This Australian Standard was prepared by Committee IT-027, Data Management and Interchange.
More informationControlled environments
AS 2252.5:2017 AS 2252.5:2017 Controlled environments Part 5: Cytotoxic drug safety cabinets (CDSC) Design, construction, installation, testing and use This Australian Standard was prepared by Committee
More informationLICENCE. for WEB LINKS. Check if this document is current Find similar documents StandardsWatch (info and login) Visit our website
LICENCE for Licensee: Date: Conditions of use: Click here for full conditions of Licence WEB LINKS Check if this document is current Find similar documents StandardsWatch (info and login) Visit our website
More information