GKN Driveline IMDS Training Manual for Suppliers
|
|
- Jeffrey Smith
- 6 years ago
- Views:
Transcription
1 GKN Driveline IMDS Training Manual for Suppliers Sustainable Product Development Page 1 of 9
2 Why IMDS? the Background IMDS (International Material Data System) is a reporting system that has been developed by EDS on behalf of a joint venture of OEM s to answer the legislation regarding ELV (End of Life Vehicle). The European Directive 2000/53/EC and its subsequent amendment 2002/525/EC, ELV Directive has 2 key sections that Member States need to comply with: Article 4, Prevention. This details the removal of hazardous substances in components. 1a) limit the use of hazardous substances in vehicles and to reduce inclusion of them from the vehicle conception (thereby avoiding their release to the environment, making recycling easier and avoiding the hazardous waste disposal. 1b) design and production to include dismantling, reuse and recovery 1c) use increased quantities of recycled materials 2a) ensure that Pb/Cd/Hg/Cr6 are not used as from 1 July 2003 for vehicles put on the market (other than those stated in Annex II) 2 b & c) description of the use of Annex II Lead, Mercury, Cadmium and Hexavalent Chromium are labeled as Hazardous substances in the Directive and therefore are to be removed from vehicles where possible to meet restricted allowable limits (by weight). Annex II of the Directive outlines some exemptions, which includes: Materials and components exempt from 4 (2)(a): Lead as an alloying agent (steel for machining purposes and galvanized steel containing up to 0.35% lead by weight) Lead and lead compounds in components (exceptions exist for dampers and vulcanizing agents for elastomers) Hexavalent Chromium (corrosion preventative coatings 1 st July 2007) Note/ a maximum concentration value up to 0.1% by weight and per homogenous material, for lead, mercury and hexavalent chromium and up to 0.01% by weight per homogenous material for cadmium shall be tolerated, provided these substances are not intentionally introduced Intentionally Introduced shall mean deliberately utilized in the formulation of a material or component where its continued presence is desired in the final product to provide a specific characteristic, appearance or quality. The use of recycled materials as feedstock for the manufacture of new products, where some portion of the recycled materials may contain amounts of regulated metals, is not to be considered as intentionally introduced. Article 7, Reuse and Recovery. Targets for 2006 and 2015 are detailed in this section. January 1 st 2006: minimum 85% re-use and recovery of ELV s 80% re-use and recycling (Vehicles made before 1980 target is reduced to 70%) January 1 st 2015: minimum 95% re-use and recovery of ELV s 85% re-use and recycling Not all of the OEMs have chosen IMDS to be their way to gather information. Honda, Rover, Peugeot and Renault are examples of customer who have not yet chosen to join in IMDS. These customers have their own system to collate this information (namely excel spreadsheets). Sustainable Product Development Page 2 of 9
3 Please be aware that to support the OEMS meet the demands of the legislation we need to support all systems of reporting at present. Note/ a copy of the legislation including the updated Annex II can be accessed through the IMDS web site. Note/ This is purely a summary of the legislation that has been released. It by no means illustrates the basic substance requirements of GKN Driveline. No Lead (Pb) or Cadmium (Cd) are accepted in materials received by GKN Driveline, even as impurities (Nil < 10ppm). Sustainable Product Development Page 3 of 9
4 IMDS Overview The IMDS is the automotive industry product environmental data system. It is a joint development of Audi, BMW, Daimler-Chrysler, Ford, Opel, Porsche, VW and Volvo, which was set up in the summer of Fiat joined this development in July 2001, Toyota in June 2002, Mitsubishi in Nov 2002 and Nissan in March Other OEMS s are still considering joining the IMDS way of Working. The aim of IMDS is to enable a complete product environmental model to be constructed for a vehicle, including the chemical composition of all materials used in components and coatings. This requires the vehicle manufacturer and all component and material suppliers in a supply chain to enter detailed information into the IMDS database via the Internet, and subsequently maintain this information e.g. to take account of engineering changes. The IMDS website is accessed on All users with Internet Access can access this site and view the public pages, which contain information on: System (link takes you to the Log on screen) Home (Welcome to IMDS) Community (Links to customer websites) News Training Contact (helpdesk telephone numbers and hours) Lists (Link to the VDA substance listing) FAQ (Frequently Asked Questions) including links to customer presentations Index Access into an IMDS account is required to view existing component information within that account, to create new information, and to modify existing information. Users are restricted from directly accessing confidential information entered by other companies, and can only view information that has been created within their own local section in IMDS, or information which has been released by users into a public section of IMDS, or that has been received from another account. Sustainable Product Development Page 4 of 9
5 IMDS Term Definitions MDS Material Data Sheet: A MDS is a logical data unit and constitutes a complete information package for a part, as described in VDA Volume 2. A MDS always contains at least one module. MDS s are subject to revision control. Of relevant data changes, a new MDS version needs to be created. If a version has been sent and accepted, it is no longer possible to make changes (with a few exceptions) to this particular MDS. Component: A component is identical with an assembled component. One component can consist of several different components. In extreme, a component could even consist of thousands of other components. Semi component: A semi-component is similar to a component. However, it differs from a component because it only becomes a component through another processing step (e.g. cutting to size) Material: The material is the basic component for each component (plastics, metals, etc.) Basic Substance: Basic substances are chemical elements or chemical combinations as they naturally occur or are produced. This includes all necessary agents in order to maintain it s stability, and pollution which occurs because of the manufacturing process. This excludes solvents, which can be separated from the material without reducing its stability or changing its make-up. Module: Modules are components from which the user can create MDSs. They contain the tree structure and all information containing the materials and substances contained in the parts. Modules are also subject to revision control. This means that once a user has released a module for productive run, it can no longer be edited. A module can be created in one of 2 ways: It can either be a partial copy from a MDS, or it can be generated via the menu item Create module. In the former case, the module contains information as to which MDS it was copied from. The user can also enter additional references to other MDSs manually. Tree structure: A module consists of a tree structure. This is a structural representation of each of the materials and the substances contained within the parts. Node: A module consists of a tree structure and information on the materials and substances contained in the parts. Each material / substance always represents a node in the tree structure. When the user clicks on one of these modes he can view the information on this material / substance (node) in the right hand field. Sustainable Product Development Page 5 of 9
6 MDS Structure All MDS s for components, semi components and materials, have the same structured 4 step approach for inputting the requested data: Ingredients Security / Environment Supplier Information Recipients Data Category 1. Component / Material composition with BOM tree structure, Ingredients This section lists the contents of the component/ semi-component / material. To ensure a clear display, the system uses a tree structure, which is named the Product Structure Tree. It displays all the nodes the item is built up of. You can open and close the structure using the options, expand and collapse. This sections holds information regarding: Component / Semi component / Material Name Internal part number Allocated IMDS ID number Weight Tolerance (on weight) Note/ Note/ Note/ For material naming, please reference GKN Driveline Standards where possible. When creating the MDS BOM any Hazardous Substances that are below the maximum concentration and are not intentionally introduced should not be reported in IMDS. Jokers are to be used for substances with a maximum allowable limit of 10% of the material composition. Category 2. Security / Environment information This section holds information pertaining to the security / environmental risk of the MDS, ie how hazardous the material is to water etc. Category 3. Supplier Information Select your company and the correct Contact Partner (IMDS user) for the MDS being submitted. Contact details for that user should automatically appear. Category 4. Recipients Data The receiver of the MDS is added in this window. Please send the data to the GKN Driveline Account (Number 5929) referencing our part number (as per purchase order). Sustainable Product Development Page 6 of 9
7 Creating Components/Semi-Components/ Materials: To create a new Component or semi component select the Menu Option Create which then leads to a sub-menu with 2 options: 1) MDS 2) Module Upon selection 3 options will then appear: 1) Component 2) Semi-component 3) Material Insert the tree structure of an MDS or Module The following buttons are used to create the tree structure of a MDS for a component / material: Component / part: create a component in the MDS the component name, part number and weight shall be inserted. Semi-component: create a semi component in the MDS the semi component name, part number shall be inserted Material: is used to search for a material in the material database held within IMDS. The material shall be inserted under the component / semi component level. Substance: is used to search for a substance in the substance database within IMDS. Substances shall be inserted under the material level when creating a MDS of a material. Referring to existing MDS of a sub-component: Is used to search for an already existing MDS of a sub component in the IMDS database, either self-made or from a sub-supplier. Delete a node: is used to delete a node within the structure tree. Select the correct part and continue by selecting lower level BOM (substances for a material, or lower level assembly parts for a component). Existing components/semi-components can be copied from a previous IMDS submission to create new components/semi-components definition. Where necessary, only the weights and Part Numbers will then have to be changed. Use Copy and Copy to get a new IMDS ID Number for a new component/semi-component. All submissions should be in a structured assembly. Use of Jokers for Confidential Compositions: IMDS provides a mechanism to enable users to protect confidential material information; these are referred to as jokers or wild cards. The jokers on offer can be found by typing Sustainable Product Development Page 7 of 9
8 system into the CAS (Chemical Abstract System) number box on materials. The most accepted joker is miscellaneous although customer restrictions differ on the type and quality allowed please refer to the individual end OEM way of working to see if the material composition complies. Releasing Material Data Sheets (MDS) The purpose of the IMDS is to create MDS and make them available to selected receivers. There are 4 ways to do this: Send a MDS: The most common action is to send a MDS to one manufacturer. He can either accept or refuse the MDS. When he accepts the MDS it automatically closed to further changes. When the manufacturer refuses the MDS, the creator of the MDS must make any changes. Recommendation of a MDS: When the same component is delivered to several different manufacturers, the MDS can simultaneously be proposed to these receivers. In the ideal cast all receivers accept the MDS just as it is. If one of the receivers would like to have some changes made, a new MDS specifically made out for this receiver must be created and resent to the receiver. Internal access to a MDS: The creator of a MDS has the possibility to make the MDS readable for internal use, i.e. every authorized user within their own company can read the MDS. Public access to a MDS: The creator of a MDS has also the possibility to make the MDS readable for every user of the IMDS. The Construction Kit System: A MDS can be created at any time, but for components, which only vary slightly, it is time consuming. Therefore, each company can design their own construction kit within the system. This is where modules are created. The SENT page: Please note the terminology used here as outlined at the bottom of the page within the system. Acpt Recd Mod Seen Nseen Cbs accepted Rejected (NOTE THIS DOES NOT MEAN RECEIVED) modified opened by the receiver not yet opened cancelled by sender IMDS Contacts within GKN Driveline If you have a query, please forward this to your local GKN Contact (requesting work regarding IMDS), or to: Kate Everitt, Client manager, GKN Driveline IMDS account Tel: +44 (0) kate.everitt@add.gknplc.com Sustainable Product Development Page 8 of 9
9 Summary Rules for IMDS for Suppliers to GKN Driveline Operations No GKN patented data to be Published within the IMDS arena All data to be created in English for ALL GKN Driveline Operations Use internal Part numbers when creating parts but complete the GKN Part number on Page (category) 4 upon submission. Structure to follow guidelines as per IMDS report. Glossary CAS Number Chemical Abstract System Number globally recognized system for identifying individual chemicals Dismantling information means all information required for the correct and environmentally sound treatment of end-of life vehicles. It shall be made available to authorized treatment facilities by vehicle manufacturers and component producers in the form of manuals or by means of electronic media. EDS ELV IMDS MDS Recovery Recycling Reuse VDA Electronic Data Systems (company hired to create IMDS system) End of Life Vehicle; a vehicle which is waste within the meaning of the article 1(a) of Directive 75/442/EEC. International Material Data System Material Data Sheet means any of the applicable operations provided for in Annex IIB to Directive 75/442/EEC means the reprocessing in a production process of the waste materials for the original purpose or for other purposes but excluding energy recovery. Energy recovery means the use of combustible waste as a means to generate energy through direct incineration with or without other waste but with recovery of the heat. means any operation by which components of end-of life vehicles are used for the same purpose for which they were conceived. The Verband der Automobilindustrie (Automobile Industry Association) Sustainable Product Development Page 9 of 9
Global Automotive Declarable Substance List (GADSL) Guidance Document(2016)
Global Automotive Declarable Substance List (GADSL) Guidance Document(2016) Revised February 2018 Global Automotive Stakeholder Group (GASG) 1 Contents 1. GADSL Objectives 2. Application of the GADSL 3.
More informationDIRECTIVE 2000/53/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 September 2000 on end-of life vehicles
L 269/34 DIRECTIVE 2000/53/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 September 2000 on end-of life vehicles THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION, Having regard to
More informationDIRECTIVE 2000/53/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 September 2000 on end-of life vehicles (OJ L 269, , p.
2000L0053 EN 21.03.2008 005.001 1 This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents B DIRECTIVE 2000/53/EC OF THE EUROPEAN PARLIAMENT
More informationIMDS and GADSL. GC3 Conference Ann Arbor May 10, Marcia Castellani Bing Xu Ford Motor Company
IMDS and GADSL GC3 Conference Ann Arbor May 10, 2012 Marcia Castellani Bing Xu Ford Motor Company 1 Outline International Material Data System (IMDS) background IMDS Current Status and Data Utilizations
More informationDate implemented: June 1, 2017 Stanley Group
Date implemented: June 1, 2017 Stanley Group - Contents - 1.Introduction 1 2.Stanley s Environmental Activities 2 1)Environmental Policy 2 2)B a s i c P h i l o s o p h y o n t h e E n v i r o n m e n
More informationStatement of RoHS Exemption. In the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, Article 5 (b) states:
Statement of RoHS Exemption In the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, Article 5 (b) states: Any amendments which are necessary in order to adapt the
More informationChemicals in consumer products
Chemicals in consumer products Katrin Juhanson Baltic Environmental Forum Estonia Katrin.Juhanson@bef.ee 29 30 June, St. Petersburg Overview of the presentation: a)nickel and allergy b)electronics hazardous
More informationUpdate on Draft proposal of Indian ELV - SIAM Recycling Task Force
Update on Draft proposal of Indian ELV - SIAM Recycling Task Force 6 th SIAM -JAMA Meeting Tokyo, 30 Oct 2011 Mr. Assistant General Manager (R&D) Maruti Suzuki India Limited Society of Indian Automobile
More informationREACH and RoHS updates for EU and Asia Pacific countries Mike McNally Antea Group
REACH and RoHS updates for EU and Asia Pacific countries Mike McNally Antea Group Agenda Overview REACH RoHS Related regulations Discussion: Key Risks Key Considerations Overview We have witnessed an unprecedented
More informationSUMMARY. 1 Large household appliances. 2 Small household appliances. 3 Informatics and Telecommunication (IT) equipment. 4 Consuming products
SUMMARY This technical report presents analytical data and information related to: The characteristics of the Waste Electrical and Electronic Equipment WEEE (composition, hazardous substances/materials,
More information(Consolidated Version) 1 of COUNCIL DIRECTIVE ON WASTE
(Consolidated Version) 1 of COUNCIL DIRECTIVE ON WASTE THE COUNCIL OF THE EUROPEAN COMMUNITIES,... HAS ADOPTED THIS DIRECTIVE: For the purposes of this Directive: Article 1 (a) "waste" shall mean any substance
More informationThe Restriction of Hazardous Substances in electrical & electronic equipment (RoHS) Directive
The Restriction of Hazardous Substances in electrical & electronic equipment (RoHS) Directive presented by Steve Andrews UK Department of Trade & Industry Outline 1. Introduction the role of the DTI 2.
More information3M I/O Interconnect System 2.0 mm for IEEE 1394
M I/O Interconnect System 2.0 mm for IEEE 194 Shell Kit for Receptacle E06 Series Complete shell kit for M 2.0 mm I/O Interconnect System for IEEE 194 Wiremount Receptacle (TS-2296) Includes outer body,
More informationOmron Group Green Procurement Standards
Omron Group Green Procurement Standards Ver. 5.0, September 2017 OMRON CORPORATION Table of Contents Foreword...P2 Chapter 1 Environmental Activities 1. OMRON Group Purchasing Policies...P3 Chapter 2 Green
More informationVEHICLE BODYWORK Demonstrate knowledge of vehicle body and structural design principles
1 of 6 level: 5 credit: 6 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Motor Industry People credited with this unit standard are able
More informationCOMMISSION DELEGATED DIRECTIVE (EU).../ of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2015) XXX draft COMMISSION DELEGATED DIRECTIVE (EU).../ of XXX amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the
More informationEsigenze di formazione e qualifica per soddisfare i Customer Specific Requirement degli OEM
1 Esigenze di formazione e qualifica per soddisfare i Customer Specific Requirement degli OEM Alessandro Ferracino (Intertek Certification General Manager) 2 IATF: 14 elements IATF members include the
More informationRoHS & Related Initiatives
RoHS & Related Initiatives 55 th Annual SES Conference August 14, 2006 Presented By Scott MacLeod C&E News June 28, 2004 Volume 82, Number 26 1 Outline 1. Global Restricted Substances Overview 2. Standards
More informationHow ISO/TS Developed
ISO/TS16949 Documentation Structure 3 rd Party Certification Requirements Role of Top Management- for Implementation TS defines the Quality Management System requirements for the design and development,
More informationState of the Nation Report
State of the Nation Report Landfilling Practices and Regulation in Scotland Contents 1. Summary of Solid Waste Management Sector... 2 2. Overview of Landfill Practices... 5 3. Key Stakeholders in the solid
More information4.1 Reduction/elimination of environmentally sensitive materials
IEEE Standard 1680 Section 4 Environmental performance criteria for desktop personal computers, notebook personal computers and personal computer monitors This document paraphrases the environmental criteria
More information1.1. When does the recycling process start and when does it end? Definition of system boundaries (input and output) of the recycling process
GUIDELINES 1 ON THE APPLICATION OF COMMISSION REGULATION EU 493/2012 LAYING DOWN DETAILED RULES REGARDING THE CALCULATION OF RECYCLING EFFICIENCIES OF THE RECYCLING PROCESSES OF WASTE BATTERIES AND ACCUMULATORS
More informationE- Waste (Management & Handling) Rules, 2011 and Guidelines
E- Waste (Management & Handling) Rules, 2011 and Guidelines In an effort to contain the harmful effects of excessive use and to ensure environmentally sound disposal of the electrical goods and electrical
More informationTSM Academy. OE Part Verify. Version
TSM Academy OE Part Verify Version 1.02.27.15 Table of Contents Preface... 3 Using OE Part Verify... 4 Domestic Vehicle OE Part Verify... 5 Considerations... 7 Foreign Vehicle OE Part Verify... 8 Mercedes-Benz
More informationLatest Status of AP ELV
AIAG IMDS & Product Chemical Compliance Conference October, 2017 Latest Status of AP ELV TOKAI RIKA CO.,LTD/JAPIA Midori Shinto Index - Overall Status in Asian Countries - China ELV Requirements - China
More informationPIMS User Guide USER GUIDE. Polaris Interview Management System. Page 1
USER GUIDE Polaris Interview Management System Page 1 September 2017 Additional PIMS Resources Job Aid: Competency Identification Worksheet Job Aid: Legal Considerations When Interviewing Video: How to
More informationEnvironmental product declaration. KONE MonoSpace Special
Environmental product declaration KONE MonoSpace Special Environmental product declaration General information The Environmental Product Declaration (EPD) provides you as a KONE customer information on
More informationGAS CYLINDERS COMPLIANCE WITH THE REVISED PACKAGING WASTE DIRECTIVE 94/62/EC AS AMENDED
GAS CYLINDERS COMPLIANCE WITH THE REVISED PACKAGING WASTE DIRECTIVE 94/62/EC AS AMENDED Doc 181/13/E EUROPEAN INDUSTRIAL GASES ASSOCIATION AISBL AVENUE DES ARTS 3-5 B 1210 BRUSSELS Tel: +32 2 217 70 98
More informationTechnology" refers to the application of knowledge for practical purposes.
Carol J. Henry, Jack Pokrzywa, & Cindy Reese ACS 13th Annual Green Chemistry & Engineering Conference June 23, 2009 1 General Motors, Ford and Chrysler are collectively one of the world's primary sources
More informationVersion: July 24, 2014
Certificate Version: 2014.4 July 24, 2014 Declaration of Compliance Trade name Tambrite and Tambrite HS (hereafter referred to as folding boxboards) Product description Folding boxboard Tambrite grammage
More informationSTANDARD. Date SP Jan F Visscher UTMS Michaela Bundschuh
1(19) Distribution: Scania, Suppliers SCANIA CUSTOMER SPECIFIC REQUIREMENTS Contents Changes from previous issue... 1 1 General... 2 2 Supplier Portal... 2 3 Scania Standards... 2 4 Customer Property...
More informationCOMPLEMENT. RoHS PRODUCTS. Prepared by: Karin Medeiros Verified by: Natália Silva. Approved by: Mariano Mercado Approval Date: 15/01/2016
Page: 1/5 Prepared by: Karin Medeiros Verified by: Natália Silva Approved by: Mariano Mercado Approval Date: 15/01/2016 1. OBJECTIVE This document presents the complementary criteria of Product Certification
More informationSAM automotive production GmbH SAM automotive GmbH Kolomanstr D Böhmenkirch
Quality Guidelines For Suppliers Of The SAM automotive group SAM automotive production GmbH SAM automotive GmbH Kolomanstr. 16 20 D 89558 Böhmenkirch www.sam-automotive.com contact@sam-automotive.com Page
More informationAppendix W: Solid and Hazardous Waste
Solid waste, as defined in 40 Code of Federal Regulations (CFR) 261.2, is any discarded material that is typically found in the solid waste stream, including municipal solid waste, construction and demolition
More informationFiat Group Automobiles Policy for Software Quality Improvement
Fiat Group Automobiles Policy for Software Quality Improvement 2010-01-2329 Published 10/19/2010 Edoardo Sivera Fiat Group Automobiles (FGA) Copyright 2010 SAE International ABSTRACT Automotive systems
More informationA blueprint for a Globally Harmonized RoHS Standard May 2007 Revision 1.2
A blueprint for a Globally Harmonized RoHS Standard May 2007 Revision 1.2 By Roland Sommer Principal Consultant, RoHS-International There are presently five RoHS style legislations enacted. All of these
More informationRevised : June 1, 2016 Revised : August 24, 2006 First edition : September 21,2000 DENSO GROUPE. June 2016 DENSO CORPORATION
Revised : June 1, 2016 Revised : August 24, 2006 First edition : September 21,2000 DENSO GROUPE Green Procurement Guideline June 2016 DENSO CORPORATION Table of Contents Introduction DENSO ECO VISION 2025
More informationStandard Operating Procedure (SOP) Remech
Standard Operating Procedure (SOP) Remech 1 General information 1.1 Actuality The Client reserves the right to update this standard operating procedure at irregular intervals and without special notification.
More informationTimesheet Navigational Flow Document (.Net Intranet Site)
Timesheet Navigational Flow Document (.Net Intranet Site) Version 1.0 Author: Offshore Team Date: 05/25/2014 Source Name: Source Location: Source Version: 1 Version History Timesheet Navigational Flow
More informationForm for assessing a chemical substance
The Swedish Society for Nature Conservation Good Environmental Choice (Bra Miljöval) Form for assessing a chemical substance that is an ingredient or forms part of an ingredient A INFORMATION ABOUT MANUFACTURER
More informationL 328/28 Official Journal of the European Union DIRECTIVES
L 328/28 Official Journal of the European Union 6.12.2008 DIRECTIVES DIRECTIVE 2008/99/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 19 November 2008 on the protection of the environment through
More informationEuropean Waste List. Dr. Joachim Wuttke. Federal Environmental Agency, Berlin )
European Waste List by Dr. Joachim Wuttke Federal Environmental Agency, Berlin ) 1. Introduction The European Waste List (EWL) is a harmonised list of wastes. It will be periodically reviewed on the basis
More informationThe End-of-life vehicles (ELV) Directive and its implementation. Bettina Lorz European Commission, DG ENV UN-ECE Conference, Geneva, 20 March 2017
The End-of-life vehicles (ELV) Directive and its implementation Bettina Lorz European Commission, DG ENV UN-ECE Conference, Geneva, 20 March 2017 in 2000: Directive 2000/53/EC on end-of-life vehicles Minimise
More informationMaruti Suzuki Green Policy Maruti Suzuki Green Procurement Guideline
Maruti Suzuki Green Policy Maruti Suzuki Green Procurement Guideline October 2015 Maruti Suzuki India Limited Contents Page No. 1. Introduction 1 2. Environment Charter 2 Environmental Concept Basic Environmental
More informationCertificate of non-use of The Controlled Substances
Certificate of non-use of The Controlled Substances Company name Product Covered Thyristor SOT-89 Package Issue Date It is hereby certified by, that there is neither RoHS (EU Directive 2011/65/EU)-restricted
More informationGE Transportation isupplier Portal (isp) Training
GE Transportation isupplier Portal (isp) Training Overview GE Transportation provides our suppliers an excellent resource to easily submit invoices and check invoice and payment status through the GETS
More informationCOMMISSION DELEGATED DIRECTIVE../ /EU. of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2014) XXX draft COMMISSION DELEGATED DIRECTIVE../ /EU of XXX amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the
More informationOverview of USD-AT&L Memo on Cr 6+ and Other Regulatory Issues
Overview of USD-AT&L Memo on Cr 6+ and Other Regulatory Issues Bruce Sartwell Weapons Systems and Platforms Program Manager Keith Legg ASETSDefense Technical Manager ASETSDefense Workshop 1 September 2009
More informationStudy on hazardous substances in electrical and electronic equipment, not regulated by the RoHS Directive
Study on hazardous substances in electrical and electronic equipment, not regulated by the RoHS Directive Project description, 17/10/2007 Öko-Institut e.v. Institute for applied ecology Carl-Otto Gensch
More informationChina RoHS an overview. Version 7 August zdeclaration. zrestriction. zdifferences to EU RoHS. zpackaging. Web:
China RoHS an overview Version 7 August 2009 Declaration Restriction Scope Packaging Differences to EU RoHS FAQs Web: www.global-legislation.com Q&A: glegislation@premierfarnell.com A Premier Farnell Company
More informationQ&A DOCUMENT: Recycling and the TSCA Inventory of Chemical Substances Premanufacture Notification and Inventory Update Reporting Requirements
Q&A DOCUMENT: of Chemical Substances Premanufacture Notification and Inventory Update Reporting Requirements This document is intended to provide guidance for reporting for the Premanufacture and Inventory
More informationRoHS Directive recast. Amendments adopted in ENVI. 2 June 2010
RoHS Directive recast s adopted in ENVI 2 June 2010 Proposal for a directive Article 4 Paragraph 7 7. When there is an unacceptable risk to human health or the environment, arising from the use of substances,
More informationWaste Management Policy
Waste Management Policy Contents 1. Introduction 2. Policy Statement 3. Policy Objectives 4. Application 5. Organisation and Management 6. Glossary of Terms Document Control Information: Last updated on:
More informationMicrosoft Dynamics GP. Manufacturing Core Functions
Microsoft Dynamics GP Manufacturing Core Functions Copyright Copyright 2010 Microsoft. All rights reserved. Limitation of liability This document is provided as-is. Information and views expressed in this
More informationCEN/TC 261 N 179 CEN/TC 261/SC 4 N 300
AFNOR Standardization Unit CEN/TC 261/SC 4 Secretariat Your correspondant : Annick GALPIN Direct line : +33 (0)1 41 62 84 32 Email :annick.galpin@afnor.fr CEN/TC 261 N 179 CEN/TC 261/SC 4 N 300 Secretariat
More informationEnd of Life Plan. Kodak Scan Station 700 Series. Network Scanners
End of Life Plan Kodak Scan Station 700 Series Network Scanners Compositional Analysis This compositional analysis applies to model(s): Scan Station 700 Series Network Scanners. The following table identifies
More informationWe have attempted to make this manual as easy to read and navigate as possible. To that end, a few basic conventions will be used throughout.
Curriculog University Curriculog University User Manual - Users Welcome to the Curriculog University User Manual! The manual has been broken down into sections for each module within Curriculog. Within
More informationRoHS. maximum concentration values lead mercury cadmium hexavalent chromium PBB and PBDE. article 2.3
Form No: 19 Version: 5 maximum concentration values lead mercury cadmium hexavalent chromium PBB and PBDE Directive reference: article 5.1(a) article 4.1 article 2.3 annex Submitted: 06/05/03 Adopted:
More informationSamsung Recycling Direct ( SRD ) Policies and Guidelines
Samsung Recycling Direct ( SRD ) Policies and Guidelines Samsung relies on recycling vendors to provide top-of-the line customer service for return of products at the end-oflife. The Samsung Recycling
More informationNational TFS Office, Dublin City Council [NTFSO] Guidance for Completing Notification Document (Annex 1A) & Movement Document (Annex 1B)
National TFS Office, Dublin City Council [NTFSO] Guidance for Completing Notification Document (Annex 1A) & Movement Document (Annex 1B) Introduction A planned shipment subject to the procedure of prior
More informationConflict Minerals Reporting Training. Module 2: How to Complete A Conflict Minerals Reporting Template (CMRT)
Conflict Minerals Reporting Training Module 2: How to Complete A Conflict Minerals Reporting Template (CMRT) SLIDE 2 Conflict Minerals Training Modules Module 1 Background on the Conflict Minerals legislation
More informationIMDS & SoC Compliance Portal Brandi Farwig, Vehicle Safety & Regulatory Compliance (VSRC)
IMDS & SoC Compliance Portal Brandi Farwig, Vehicle Safety & Regulatory Compliance (VSRC) Compliance Portal Introduction The FCA IMDS / SoC Compliance Portal was developed to provide a centralized platform
More informationSupplier Quality Manual
Supplier Quality Manual Review Date Review Modified 20 January 0 First Issue 2006 13 April 2007 1 References inserted relating to compliance declaration and materials certificates; method for handling
More informationNormative Document on Enterprise Declaration of Conformity on the Pollution Control of Electrical and Electronic Products
Normative Document on Enterprise Declaration of Conformity on the Pollution Control of Electrical and Electronic Products Ministry of Industry and Information Technology May 2012 Page 1 of 8 Normative
More informationThe Environmental Management and Protection (Saskatchewan Environmental Code Adoption) Regulations
ENVIRONMENTAL MANAGEMENT 1 ENVIRONMENTAL CODE ADOPTION) E-10.22 REG 2 The Environmental Management and Protection (Saskatchewan Environmental Code Adoption) Regulations being Chapter E-10.22 Reg 2 (effective
More informationThe Ericsson lists of banned and restricted substances
DIRECTIVE 1 (5) The Ericsson lists of banned and restricted substances 1 Application 2 Purpose 3 Directive This directive is valid for the entire Ericsson group and is applicable for design, purchasing
More informationProject and Portfolio Management Center
Project and Portfolio Management Center Software Version: 9.42 Resource Management User Guide Go to HELP CENTER ONLINE http://admhelp.microfocus.com/ppm/ Document Release Date: September 2017 Software
More informationIntel Non-CPU Component Products IEEE (EPEAT) Declaration
Intel Non-CPU Component Products IEEE 1680-2009 (EPEAT) Declaration Supplier Information Company Name Intel Corporation Contact Title Product Ecology Engineer esponse Document ID Contact Phone 480-554-5161
More informationSupplyOn information for suppliers who will use the CSV upload functionality for invoicing with Airbus
SupplyOn information for suppliers who will use the CSV upload functionality for invoicing with Airbus Document Owner: SupplyOn PM SCM Aero Dece,ber 2017 Version 1.11 SupplyOn Public 1/17 Document History
More informationCOUNCIL DIRECTIVE of 15 July 1991 concerning the placing of plant protection products on the market (91/414/EEC) (OJ L 230, , p.
1991L0414 EN 01.02.2007 016.001 1 This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents B COUNCIL DIRECTIVE of 15 July 1991 concerning
More informationGreen Procurement Standard
azbil Group Green Procurement Standard For Suppliers Third Edition: March, 2015 AGS-541A-006 Attachment 1 Rev. 3 Table of Contents 1. The azbil Group s Position on Green Procurement 2. Terms and Definitions
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MPC8270CZUUPEA FTBGA 480 37*37*1.7P1.27 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response
More information2005 National Information Services - QuickBill for Easy Dental version 3.0. QuickBill. for Easy Dental. Version 3.0
QuickBill for Easy Dental Version 3.0 727 E. Utah Valley Dr., Ste. 750 American Fork, UT 84003 Tel: (800) 734-5561 Fax: (801) 847-3800 1 SEPTEMBER 2005 COPYRIGHT 2005 Easy Dental Systems, Inc. and National
More informationTOYOTA. Green Purchasing Guidelines. Toyota Motor Corporation. January 2016
TOYOTA Green Purchasing Guidelines January 2016 Toyota Motor Corporation Table of Contents Introduction 1 Toyota Environmental Challenge 2050 2 Revision Details 3 Requests for Business Partners 4 1 Establishment
More informationGuidance on use of Disposal and Recovery Codes (Waste Management Act, 1996 as amended)
Guidance on use of Disposal and Recovery Codes (Waste Management Act, 1996 as amended) This information is provided as a source of reference for operators completing waste surveys for the EPA. Under each
More informationMicrosoft Dynamics GP. Purchase Order Processing
Microsoft Dynamics GP Purchase Order Processing Copyright Copyright 2007 Microsoft Corporation. All rights reserved. Complying with all applicable copyright laws is the responsibility of the user. Without
More informationTWG 2016 in Rosslyn, VA
TWG 2016 in Rosslyn, VA Battery-related environmental regulations in ASIA The Nobel Assembly has decided to award the 2016 Nobel Prize to Yoshinori Ohsumi for his discoveries of mechanisms for autophagy,
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number MC34704BEP Mfg Item Name QFN-EP 56 7*7*0.9 P0.4 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date
More informationPractical cards SMARTBOOKING
March 2014 version Practical cards SMARTBOOKING Insert your ID : LOGIN PASSWORD ACCOUNT MANAGER & EXTENSION SOMMAIRE SMARTBOX PROCEDURES CONTACT CUSTOMER PAGE FAQ THE COMMITMENTS OF OUR PARTNERSHIP BY
More informationFreescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MPXV7002DPT1 SNSR 8PIN DUALPORT SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date
More informationType-2 Study. Measurement system analysis in destra, version 11
Type-2 Study Measurement system analysis in destra, version 11 Type-2 Study 1/25 Contents 1. Preface... 2 2. Basic information about type-2 study... 3 2.1 Performing a measurement system analysis according
More informationUSERS' GUIDE PROCUREMENT AND DELIVERY. Nosyko AS. Version Version 1.5
Nosyko AS Rådhusgt. 17 Telephone: + 47 22 33 15 70 NO-0158 Oslo Fax: + 47 22 33 15 75 Email: developers@nosyko.no Web: www.drofus.no USERS' GUIDE Version 1.1.8 PROCUREMENT AND DELIVERY Version 1.5 DOCUMENT
More informationBusiness Portal for Microsoft Dynamics GP. Requisition Management Administrator s Guide Release 10.0
Business Portal for Microsoft Dynamics GP Requisition Management Administrator s Guide Release 10.0 Copyright Copyright 2007 Microsoft Corporation. All rights reserved. Complying with all applicable copyright
More informationData Submission Manual Part 05 - How to complete a technical dossier for registrations and PPORD notifications Data Submission Manual
Data Submission Manual Part 05 - How to complete a technical dossier for registrations and PPORD Version: 2.8 Page 1 of 95 Document history Version Changes 2.8 04/2011 2.7 12/2010: 2.6 10/2010: 2.5 05/2010:
More information- supplier self training program - - additional systems -
Bemusterung Online - BeOn - supplier self training program - Creation and Release of ISIR s to 1.6.2 VOLKSWAGEN AG Version: 2008-07-24 / K-GQS-4, K-GQS-1Version - additional systems - Content self training
More informationDRPK-005
1114 Seaco Avenue Deer Park, TX 77536 Ph: (713) 844-3200 Fax: (713) 844-3330 Report of Analysis Submitted By: Address: Contact: Item No.: Client Ref. No.: Date Received: Testing Period: Country of Origin:
More informationMotorola Green Purchasing
Motorola Green Purchasing W18 and Material Declaration Population Introduction and Training Why is Motorola Mobility Moving to WPA? Motorola Mobility is making this change to: Upgrade our aging compliance
More informationCBI Product Factsheet: Shock Absorbers in the EU5
CBI Product Factsheet: Shock Absorbers in the EU5 Practical market insights for your product The EU5 automotive market for shock absorbers is challenging for two reasons. Firstly, the automotive OEMs value
More informationOracle Process Manufacturing Formula Management
Oracle Process Manufacturing Formula Management Release 11.0 Part No. A70045-01 Oracle Process Manufacturing Formula Management Part No. A70045-01 Copyright 1999, Oracle Corporation. All rights reserved.
More informationQuality Management Agreement
Quality Management Agreement Between and SUSPA GmbH Mühlweg 33 D - 90518 Altdorf together with its subsidiaries Name of Supplier in the following named SUSPA Address City/Zip in the following named supplier
More informationHEAVY METALS IN SURFACE COATINGS
Title: HEAVY METALS IN SURFACE COATINGS SPECIFICATION Number: SRS-012 Revision: P Author: C. FISCHER Date: 9/30/08 CORPORATE QUALITY ASSURANCE Hasbro RI Approval: Hasbro UK Approval: Hasbro FE Approval:
More informationPrisma Plus enclosures up to 630 A
Prisma Plus enclosures up to 630 A Product Environmental Profile This declaration provides information on the environmental behaviour of the product during the different phases of its life cycle. 1 - General
More information1. WEB RECRUITMENT INTRODUCTION TO RELEASE WEB RECRUITMENT AVAILABLE DOCUMENTATION... 6
Contents 1. WEB RECRUITMENT INTRODUCTION TO RELEASE 4... 2 1.1 OVERVIEW OF RECRUITMENT-RELATED SYSTEMS AND WEB RECRUITMENT RELEASES 1-3... 2 1.2 RELEASE 4 OVERVIEW... 3 1.3 HR SYSTEM LINKAGES... 4 1.4
More informationDISCONTINUED. 3M PC Card Header Dual Slot, Low Profile, Integrated Ejector. Physical. Electrical. Environmental. UL File No.
PC Card Header Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Left or right ejector options ESD clips and plastic pegs for secure hold-down See
More informationWELCOME TO THE WEB SHIPPING USER GUIDE
Online Shipping WELCOME TO THE WEB SHIPPING USER GUIDE webshipping.dhl.com ON THE GO OR IN THE OFFICE, WEB SHIPPING GETS IT THERE. Ideal for busy small-business owners, office managers, or anyone on the
More informationThis document is meant purely as a documentation tool and the institutions do not assume any liability for its contents
1 z 26 26. 6. 2015 14:33 1994L0062 EN 26.05.2015 006.001 This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents B EUROPEAN PARLIAMENT AND
More informationCommittee on the Environment, Public Health and Food Safety. Committee on the Environment, Public Health and Food Safety
EUROPEAN PARLIAMT 2009-2014 Committee on the Environment, Public Health and Food Safety 14.12.2009 2008/0240(COD) ***I DRAFT REPORT on the proposal for a directive of the European Parliament and of the
More information(3) If you have cause for complaint, you may contact us using the information provided in the first paragraph.
1 Scope (1) The following terms and conditions form an integral part of any contract between Kannaway Europe sp. z o.o., Przemysłowa 6, 05-092 Blizne Łaszczyńskiego, Poland, VAT ID. 1182153795, REGON 368316614,
More informationMaryland Recycling Act (MRA) ( ) February 2, 2017
Maryland Recycling Act (MRA) (9-1701 9-1730) February 2, 2017 Our Moderator: Peter Houstle - MRN Executive Director Our Presenter: David Mrgich, Chief Waste Diversion Division Maryland Department of the
More informationElectronic invoicing/ Self-Billing in 25 member states is it possible?
Electronic invoicing/ Self-Billing in 25 member states is it possible? Presentation at the Odette Conference in Stuttgart 2004-11-18 Patrick Wille, VAT FORUM Sten Lindgren, Odette Sweden AB Introduction
More information