Operate hydro-electric station auxiliary plant
|
|
- Ursula Parsons
- 5 years ago
- Views:
Transcription
1 Page 1 of 6 Operate hydro-electric station auxiliary plant Level 4 Credits 8 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles of electricity generation and the functions of generation auxiliary plant and equipment; identify and communicate auxiliary plant and equipment parameters; operate electricity generation auxiliary plant and equipment; respond to events; and document generation auxiliary plant and equipment operation. Subfield Domain Status Electricity Supply Electricity Supply - Power System Management Registered Status date 16 April 2010 Date version published 16 April 2010 Planned review date 31 December 2014 Entry information Accreditation Standard setting body (SSB) Prerequisites: Unit 12390, Demonstrate knowledge of electricity supply systems; and Unit 12385, Operate hydro-electric generating plant on site; or demonstrate equivalent knowledge and skills. Evaluation of documentation and visit by NZQA and industry. Electricity Supply Industry Training Organisation Accreditation and Moderation Action Plan (AMAP) reference 0120 This AMAP can be accessed at Special notes 1 This unit standard is intended for, but not restricted to, workplace assessment. The range statements across the unit standard can be applied according to industry specific equipment, procedures, and processes.
2 Page 2 of 6 2 Performance and work practices in relation to the elements and performance criteria must comply with all current legislation, especially the Electricity Act 1992, and any regulations and codes of practice recognised under that statute; the Health and Safety in Employment Act 1992; and the Resource Management Act Electricity supply industry codes of practice and documented industry procedures include the Safety Manual Electricity Industry (SM-EI) Wellington: Electricity Engineers Association. A full list of current legislation and industry codes is available from the Electricity Supply Industry Training Organisation, PO Box 1245, Waikato Mail Centre, Hamilton The phrase in accordance with industry requirements is implicit in all elements and performance criteria in this unit standard. 4 Reference to procedures and specifications in this unit standard may be taken as including documented procedures and specifications relevant to the workplace in which assessment is carried out. 5 Industry requirements include all asset owner requirements; manufacturers specifications; and enterprise requirements which cover the documented workplace policies, procedures, specifications, business, and quality management requirements relevant to the workplace in which assessment is carried out. 6 Asset owner refers to the owner of an electricity supply network that takes its point of supply from Transpower NZ and delivers electricity to industrial, commercial, and residential customers. 7 The term operate is defined as manual operation and testing of hydro electricity generation plant including plant adjustments, isolations and restorations. 8 SCADA is the Supervisory Control and Data Acquisition system, a computer system that is used to operate equipment and monitor the performance of the electrical power system and/or network, gather data for analytical purposes, and generally assist the operation and delivery of electrical network functions concerning the supply of electricity to customers. 9 Terms and abbreviations related to this unit standard: Data refers to the information of a written or numerical form. The latter may include summary statistics, information in tables, and numbers displayed in a variety of graphs. Switching refers to actions carried out by a network control centre to divert electrical current, and permit contractors to perform work safely and efficiently on an electricity supply network without discontinuing supply to customers. DC - Direct current AC - Alternating current PC - Personal Computer
3 Page 3 of 6 Elements and performance criteria Element 1 Demonstrate knowledge of the principles of electricity generation and the functions of generation auxiliary plant and equipment. includes but is not limited to prime movers, governors, generators, head gates, stop logs, exciters, transformers, control and protection, batteries, chargers, communications and SCADA, governor oil pumps, auxiliary generators, standby generators, air compressors, transformer and bearing cooling water systems, domestic water, sewerage, air conditioning and heating, valves, dewatering and sump pumps, seal water filters, bearing oil coolers, oil and water separators, oil interception, fire detection and protection equipment. 1.1 The principles of electrical power systems and generating plant are described. includes but is not limited to AC systems, DC systems, voltage, frequency, power balances, DC and AC generators, excitation systems. 1.2 Generation auxiliary plant and equipment and their functions are described. auxiliary plant control, indication, alarms and protection. 1.3 The principles of efficient resource use are defined and explained. plant and equipment efficiency curves, continuous and periodic operation, resource consent limitations and obligations, contamination avoidance, choice of AC auxiliary supply source, black start capability. Element 2 Identify and communicate auxiliary plant and equipment parameters. log contents, auxiliary plant and equipment, status, in-service, out of service, isolated, voltage, frequency, currents, pressures flows, content levels. 2.1 Plant and equipment status is determined. indications, alarms, protective relay flaggings, inspections, transducers, SCADA. 2.2 Planned events which impact on equipment status are identified and their impact determined and recorded. planned outages, work requests and work control systems.
4 Page 4 of Information is transferred to relevant personnel in a manner and timeframe which meets established operating requirements. Element 3 Operate electricity generation auxiliary plant and equipment. stop, start, standby, isolating, earthing, control, indication and alarm settings, active and reactive power, pressure, flow, level, temperature. 3.1 Demonstrate knowledge of plant and equipment. single line diagram or PC display, power station layout, plant and equipment type and characteristics, manufacturers operating manuals and specifications. 3.2 Operating decisions are determined in accordance with plant status, local knowledge, and operating requirements. includes but is not limited to plant availability and service condition, effect of loss of auxiliary, resource consent and loading limits, impact, options, alternatives. 3.3 Plant and equipment are operated in sequence and in accordance with schedules and workplace procedures within defined plant capabilities. main plant operating sequence and requirements, ratings, reliability and security of DC and AC auxiliary supplies. 3.4 Plant and equipment is monitored within established operating requirements. includes but is not limited to status, indications, alarms, defects, action confirmation. Element 4 Respond to events. emergency, unscheduled event, abnormal condition, alarms, protection operations, power system faults, forced outage. 4.1 System is stabilised. alarms reset, protection reset, shutdown of dependent plant initiated, make affected plant and equipment safe.
5 Page 5 of The event and/or cause of the event are identified using available resources. automatic data acquisition, alarms identified, protection identified, events lists, event recording charts, alarm lists, SCADA. 4.3 The event is acknowledged. acknowledgement, logging. 4.4 The impact of the event on generation is determined and responded to in accordance with established procedures, policies, priorities and instructions. local control, contingency plans, emergency operating procedures. 4.5 The event is analysed to identify options to remedy or mitigate undesired conditions and hazards and identify future actions using established analysis tools and procedures. event reporting procedures, maintenance management systems, log book, event lists, relay flag sheets, plant history records. 4.6 The event reporting is conducted in accordance with established procedures and instructions. local instructions, event reporting standards, Health and Safety in Employment Act 1992, Electricity Act 1992, Electrical Regulations Element 5 Document generation auxiliary plant and equipment operation. service report, log book, test reports and results, plant history, work control documentation systems, operational plans, event lists, generation availability data systems, generation management systems, maintenance management systems, electronic log, operating orders and/or switching sheets, plant outage requests, data, check sheets, statistical log sheets. 5.1 Developed plans and recorded information are complete, concise, and legible. 5.2 Information is recorded in the required format and filed within scheduled timeframe. Please note Providers must be accredited by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.
6 Page 6 of 6 Industry Training Organisations must be accredited by NZQA before they can register credits from assessment against unit standards. Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards. Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Comments on this unit standard Please contact the Electricity Supply Industry Training Organisation info@esito.org.nz if you wish to suggest changes to the content of this unit standard.
NZQA registered unit standard version 6 Page 1 of 6
Page 1 of 6 Title Operate hydro-electric generating plant on site Level 4 Credits 8 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles of hydro-electric
More informationNZQA registered unit standard version 5 Page 1 of 6. Operate hydro-electric generating plant from enterprise control room
Page 1 of 6 Title Operate hydro-electric generating plant from enterprise control room Level 6 Credits 16 Purpose People credited with this unit standard are able to: demonstrate knowledge of the principles
More informationManage electricity generation dispatch
Page 1 of 6 Manage electricity generation dispatch Level 6 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of principles of power system operation; identify
More informationCarry out routine inspection and servicing on substation emergency services
Page 1 of 6 Carry out routine inspection and servicing on substation emergency services Level 3 Credits 4 Purpose People credited with this unit standard are able to: prepare for inspection and servicing
More informationCarry out acceptance and maintenance tests on distance protection relays
Page 1 of 5 Carry out acceptance and maintenance tests on distance protection relays Level 5 Credits 4 Purpose People credited with this unit standard are able to: prepare for acceptance and maintenance
More informationCarry out routine inspection and servicing on high voltage bulk oil circuit breakers
Page 1 of 6 Carry out routine inspection and servicing on high voltage bulk oil circuit breakers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare for inspection, testing
More informationNZQA registered unit standard version 4 Page 1 of 5. Carry out switching operations on metal clad switchgear
Page 1 of 5 Title Carry out switching operations on metal clad switchgear Level 4 Credits 3 Purpose People credited with this unit standard are able to: demonstrate knowledge of metal clad switchgear,
More informationApply earths to and remove earths from electrical conductors, plant and equipment
Page 1 of 5 Apply earths to and remove earths from electrical conductors, plant and equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: demonstrate knowledge of earthing
More informationNZQA registered unit standard version 4 Page 1 of 5. Operate power-operated elevating work platforms (EWP) in an electricity supply environment
Page 1 of 5 Title Operate power-operated elevating work platforms (EWP) in an electricity supply environment Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge
More informationCarry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus
Page 1 of 7 Carry out routine inspection and service on high voltage indoor metal clad circuit breakers and bus Level 4 Credits 4 Purpose People credited with this unit standard are able to: prepare for
More informationDemonstrate the requirements for holding permits on high voltage electrical equipment
Page 1 of 6 Demonstrate the requirements for holding permits on high voltage electrical equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: describe the requirements
More informationInstall and commission high voltage (HV) electricity current transformer metering
Page 1 of 5 Install and commission high voltage (HV) electricity current transformer metering Level 4 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of the
More informationNZQA registered unit standard version 3 Page 1 of 5. Install high voltage (HV) electricity network overhead conductors
Page 1 of 5 Title Install high voltage (HV) electricity network overhead conductors Level 4 Credits 8 Purpose People credited with this unit standard are able to: interpret scope of work for installing
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Demonstrate the requirements for holding access permits for work on high voltage electrical lines, cables, and equipment Level 3 Credits 4 Purpose People credited with this unit standard
More informationMeasure and prune trees around electricity lines for vegetation control to minimum approach distance
Page 1 of 5 Measure and prune trees around electricity lines for vegetation control to minimum approach distance Level 4 Credits 8 Purpose People credited with this unit standard are able to: select tree
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and servicing on high voltage minimum oil circuit breakers
1 of 9 level: 4 credit: 6 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for inspection, testing
More informationPlan and manage helicopter overhead lines operation
Page 1 of 5 Plan and manage helicopter overhead lines operation Level 5 Credits 10 Purpose People credited with this unit standard are able, for helicopter overhead lines operations, to: plan; organise
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and service on oil filled distribution power transformers 11kV to 400V
1 of 8 level: 4 credit: 8 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for routine service transformers
More informationDemonstrate knowledge of servicing automotive air conditioning systems
Demonstrate knowledge of servicing automotive air conditioning systems 24448 version 1 Page 1 of 5 Level 3 Credits 2 Purpose This theory-based unit standard is for people in the automotive repair industry.
More informationNZQA unit standard version 6 Page 1 of 5. Apply and remove safety measures in an electricity supply environment
Page 1 of 5 Title Apply and remove safety measures in an electricity supply environment Level 3 Credits 3 Purpose People credited with this unit standard are able to: demonstrate knowledge of safe working
More informationNZQA registered unit standard version 4 Page 1 of 6. Carry out acceptance, commissioning and maintenance tests on power transformers
Page 1 of 6 Title Carry out acceptance, commissioning and maintenance tests on power transformers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare to test power transformers
More informationCarry out routine maintenance on automotive automatic transmissions
Page 1 of 5 Carry out routine maintenance on automotive automatic transmissions Level 3 Credits 4 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit
More informationTest and service hydraulic systems on equipment, vehicles, and/or machines
Page 1 of 5 Test and service hydraulic systems on equipment, vehicles, and/or machines Level 3 Credits 6 Purpose This unit standard is for people in the automotive repair industry. People credited with
More informationEstablish quality requirements, manage, and monitor the installation of subdivision infrastructure
Page 1 of 5 Establish quality requirements, manage, and monitor the installation of subdivision infrastructure Level 6 Credits 18 Purpose This unit standard is for people who are working, or who intend
More informationCarry out general service checks on non-electric forklifts and forklift attachments
Page 1 of 5 Carry out general service checks on non-electric forklifts and forklift attachments Level 3 Credits 4 Purpose This unit standard is for people in the materials handling equipment repair industry.
More informationMeet Approved Handler requirements for the transport of bulk hazardous substances by road
Meet Approved Handler requirements for the transport of bulk hazardous substances by road 25986 version 1 Page 1 of 5 Level 4 Credits 6 Purpose This unit standard is for the drivers of road transport vehicles
More informationDemonstrate knowledge of the fundamentals of power system earthing
Page 1 of 5 Demonstrate knowledge of the fundamentals of power system earthing Level 7 Credits 15 Purpose People credited with this unit standard are able to: compile an explanation on the purpose of earthing;
More informationInstruct a programme using low ropes course activities
Page 1 of 5 Instruct a programme using low ropes course activities Level 5 Credits 5 Purpose People credited with this unit standard are able to: prepare for instructing low ropes course activities; instruct
More informationControl pests by fumigation in the urban pest management industry
Page 1 of 5 Control pests by fumigation in the urban pest management industry Level 4 Credits 15 Purpose This is a specialist unit standard for people training for the urban pest management industry. People
More informationMaintain court security
Page 1 of 8 Maintain court security Level 4 Credits 20 Purpose This unit standard is for court security officers employed by the Ministry of Justice to maintain security in courts. People credited with
More informationSet up, repair and maintain a Baader BA 190 fish filleting machine
Set up, repair and maintain a Baader BA 190 fish filleting machine 17949 version 3 Page 1 of 6 Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 190 fish filleting
More informationPUBLIC SECTOR SERVICE DELIVERY Develop public sector service delivery objectives, and implement systems to meet client needs
1 of 5 level: 7 credit: 20 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationTransport perishable products by road
Page 1 of 5 Transport perishable products by road Level 4 Credits 25 Purpose This unit standard is for those who drive, or intend to drive, road transport vehicles transporting perishable products. People
More informationConfirm log grades and scale logs
Page 1 of 5 Confirm log grades and scale logs Level 3 Credits 10 Purpose People credited with this unit standard are able to: manage hazards associated with confirming log grades and scaling logs; demonstrate
More informationMARITIME ENGINEERING Operate marine turbine propulsion plant outside normal parameters
1 of 6 level: 6 credit: 18 planned review date: January 1998 sub-field: purpose: entry information: accreditation option: moderation option: Maritime This unit standard is for people in the maritime engineering
More informationMaximise timber recovery
Page 1 of 6 Maximise timber recovery Level 5 Credits 25 Purpose People credited with this unit standard are able to: manage safety when maximising timber recovery; compare log supply with log specification;
More informationSet up, repair and maintain a Baader BA 212CK fish filleting machine
Page 1 of 5 Set up, repair and maintain a Baader BA 212CK fish filleting machine Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 212CK fish filleting machine, able
More informationMake ready a sheet-fed offset printing press for spot colour work
Make ready a sheet-fed offset printing press for spot colour work 26318 version 1 Page 1 of 5 Level 3 Credits 30 Purpose People credited with this unit standard are able to: check job documentation and
More informationDemonstrate knowledge of vegetation fire behaviour
Page 1 of 5 Demonstrate knowledge of vegetation fire behaviour Level 5 Credits 8 Purpose This unit standard is for people with responsibilities for vegetation fire pre-suppression preparedness planning
More informationAUTOMOTIVE WORKSHOP ENGINEERING Use an oxy-acetylene welding plant in the motor industry
1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21682 replaced unit standard 230 and unit standard 3885.
More informationAssist press operator on a reel-fed printing press
Page 1 of 5 Assist press operator on a reel-fed printing press Level 2 Credits 12 Purpose People credited with this unit standard are able to: follow safety requirements for the press being used; check
More informationTransport horses by road
Page 1 of 5 Transport horses by road Level 4 Credits 25 Purpose This unit standard is for drivers of road transport vehicles carrying horses. People credited with this unit standard are able to: describe
More informationNZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident
Page 1 of 5 Title Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: the interrelated
More informationPUBLIC SECTOR SERVICE DELIVERY Establish client needs and gain agreement on requirements for public sector service delivery
1 of 5 level: 6 credit: 15 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationMARITIME ENGINEERING Operate maritime diesel propulsion plant outside normal parameters
1 of 5 level: 6 credit: 26 planned review date: January 1998 sub-field: purpose: Maritime This unit standard is for people in the maritime engineering industry and covers the necessary operation of marine
More informationProduce screens, and make stencils using the capillary system, for screen printing
Page 1 of 5 Produce screens, and make stencils using the capillary system, for screen printing Level 3 Credits 12 Purpose People credited with this unit standard are able to: check documentation and confirm
More informationStore, maintain, and distribute liquid food or related products using automated systems
Page 1 of 5 Store, maintain, and distribute liquid food or related products using automated systems Level 3 Credits 3 Purpose This unit standard is for people who are currently working, or who intend to
More informationDemonstrate an advanced knowledge of railway signals
Page 1 of 5 Demonstrate an advanced knowledge of railway signals Level 4 Credits 15 Purpose People credited with this unit standard are able to: demonstrate an advanced knowledge of fixed railway signals,
More informationNZQA registered unit standard 5555 version 6 Page 1 of 5
Page 1 of 5 Title Arrange and manage a visitor conference Level 5 Credits 20 Purpose People credited with this unit standard are able to: plan operations for a visitor conference; manage monetary, human
More informationNZQA registered unit standard 9536 version 5 Page 1 of 6. Undertake petrochemical wellhead maintenance activities under supervision
Page 1 of 6 Title Undertake petrochemical wellhead maintenance activities under supervision Level 3 Credits 4 Purpose This unit standard applies to operational activities carried out on producing wellheads.
More informationExplain foot and mouth disease controls in the processing of milk in the dairy industry
Page 1 of 5 Explain foot and mouth disease controls in the processing of milk in the dairy industry Level 3 Credits 4 Purpose People credited with this unit are able to: explain the features and characteristics
More informationPrepare a schedule of quantities, cost estimate and tender documentation for landscape work
Page 1 of 5 Prepare a schedule of quantities, cost estimate and tender documentation for landscape work Level 5 Credits 15 Purpose This unit standard is for people working, or intending to work, in landscaping.
More informationOperate a root crop harvester
Page 1 of 5 Operate a root crop harvester Level 4 Credits 20 Purpose People credited with this unit standard are able to: select and prepare root crop harvesting equipment and machinery; carry out field
More informationDemonstrate and apply knowledge of leading a security team
Demonstrate and apply knowledge of leading a security team 25627 version 1 Page 1 of 7 Level 4 Credits 15 Purpose This unit standard is for security team leaders who are required to lead a team in a security
More informationNZQA registered unit standard 9537 version 5 Page 1 of 6. This unit standard applies to operational activities carried out on producing wellheads.
Page 1 of 6 Title Replace faulty petrochemical wellhead equipment Level 4 Credits 8 Purpose This unit standard applies to operational activities carried out on producing wellheads. People credited with
More informationOutline New Zealand Greenshell mussel (kutai, kuku) farming
Outline New Zealand Greenshell mussel (kutai, kuku) farming 16337 version 3 Page 1 of 5 Level 2 Credits 10 Purpose People credited with this unit standard are able to: identify the Greenshell mussel; describe
More informationTrim and limb shelter belts
Page 1 of 5 Trim and limb shelter belts Level 4 Credits 10 Purpose People credited with this unit standard are able to: select and prepare trimming and limbing equipment and machinery; carry out field
More informationNZQA registered unit standard 3851 version 7 Page 1 of 5. Service commercial refrigeration and/or air conditioning systems
Page 1 of 5 Title Service commercial refrigeration and/or air conditioning systems Level 4 Credits 20 Purpose This unit standard is for people who work in the refrigeration and air conditioning sector
More informationManage the transportation of hazardous substances by road
Manage the transportation of hazardous substances by road Page 1 of 5 Level 6 Credits 10 Purpose This unit standard is for carriers of goods service vehicles carrying hazardous substances. People credited
More informationExplain hatchery techniques used in the New Zealand aquaculture industry
Page 1 of 5 Explain hatchery techniques used in the New Zealand aquaculture industry Level 4 Credits 15 Purpose People credited with this unit standard are able to explain: the conditioning and management
More informationNZQA registered unit standard 3846 version 7 Page 1 of 7. Maintain commercial refrigeration and/or air conditioning systems
Page 1 of 7 Title Maintain commercial refrigeration and/or air conditioning systems Level 3 Credits 20 Purpose This unit standard is for people who work in the refrigeration and air conditioning sector
More informationTransport bulk gases by road
Page 1 of 9 Transport bulk gases by road Level 4 Credits 15 Purpose This unit standard is for drivers of road tank wagons who load, transport and unload bulk gases under pressure, including hazardous and
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2010.
NQF Ref 0140 Version 4 Page 1 of 8 National Certificate in Energy and Chemical Plant (Process Operation) (Level 2) with optional strands in Steam Generation, Ancillary Operations, Geothermal, Waste Treatment,
More informationUse advanced felling techniques in arboriculture
Page 1 of 5 Use advanced felling techniques in arboriculture Level 4 Credits 10 Purpose This unit standard is for people wishing to extend their tree felling skills in an arboriculture situation. People
More informationCheck, coat and reinforce polystyrene substrate to form a Proprietary Plaster Cladding System on site
Page 1 of 5 Check, coat and reinforce polystyrene substrate to form a Proprietary Plaster Cladding System on site Level 3 Credits 20 Purpose People credited with this unit standard are able to: check polystyrene
More informationPOULTRY MANAGEMENT Manage hatchery operations
1 of 5 level: 4 credit: 32 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Poultry Production People credited with this unit standard
More informationDescribe practices to maintain the quality of perishable products during transport by road
Page 1 of 5 Describe practices to maintain the quality of perishable products during transport by road Level 3 Credits 5 Purpose This unit standard is for those who drive, or intend to drive, road transport
More informationIRRIGATION Demonstrate knowledge of irrigation systems, components, and performance
1 of 5 level: 4 credit: 6 planned review date: August 2006 sub-field: purpose: entry information: accreditation option: moderation option: Water Industry People credited with this unit standard are able
More informationVEHICLE BODYWORK Mask a repair for priming; and prime, fill, and sand a repair in the motor body industry
1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21703 replaced unit standard 3868 and unit standard
More informationThis qualification is expiring. The last date to meet the requirements is 31 December 2010.
NQF Ref 0141 Version 5 Page 1 of 8 National Certificate in Energy and Chemical Plant (Process Operation) (Level 4) with optional strands in Refrigeration, Steam Generation, Ancillary Operations, Geothermal,
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Operate timber treatment plant Level 3 Credits 15 Purpose People credited with this unit standard are able to: manage hazards associated with operating and maintaining timber treatment
More informationPUBLIC SECTOR COMPLIANCE MANAGEMENT Audit quality management systems for compliance with weights and measures legislation
1 of 6 level: 6 credit: 13 planned review date: December 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationCarry out off-road motorcycle training
Page 1 of 5 Carry out off-road motorcycle training Level 5 Credits 10 Purpose People credited with this unit standard are able to: prepare for a training session in riding motorcycles off-road; conduct
More informationNZQA registered unit standard 9506 version 5 Page 1 of 5. Conduct a sample analysis in a petrochemical laboratory
Page 1 of 5 Title Conduct a sample analysis in a petrochemical laboratory Level 4 Credits 6 Purpose This unit standard is for people employed in the petrochemical industry. People credited with this unit
More informationNational Certificate in Concrete Construction (Sawing and Drilling) (Level 3)
NZQF NQ Ref 1613 Version 1 Page 1 of 6 National Certificate in Concrete Construction (Sawing and Drilling) (Level 3) Level 3 Credits 74 Purpose The National Certificate in Concrete Construction (Sawing
More informationOperate a diesel-mechanical/hydraulic railcar/multiple unit on a main line managed by a network operator
Page 1 of 5 Operate a diesel-mechanical/hydraulic railcar/multiple unit on a main line managed by a network operator Level 4 Credits 10 Purpose People credited with this unit standard are able to: prepare
More informationProvide career consultation to career consultation clients
Page 1 of 5 Provide career consultation to career consultation clients Level 5 Credits 20 Purpose People credited with this unit standard are able to: establish rapport with clients in the career consultation
More informationLOGISTICS OPERATIONS Plan distribution centre structure and equipment for a logistics operation
1 of 5 level: 5 credit: 8 planned review date: February 2004 sub-field: purpose: entry information: accreditation option: moderation option: Logistics People credited with this unit standard are able to:
More informationRemove and repair perforated non-structural body panel corrosion damage
Page 1 of 5 Remove and repair perforated non-structural body panel corrosion damage Level 3 Credits 3 Purpose This unit standard is for people who work in the motor body industry. People credited with
More informationDemonstrate knowledge of the principles of organic horticultural production
Demonstrate knowledge of the principles of organic horticultural production 21043 version 1 Page 1 of 5 Level 3 Credits 20 Purpose People credited with this unit standard are able to: demonstrate knowledge
More informationNZQA registered unit standard version 1 Page 1 of 5. Determine and describe construction of medium and large buildings
Page 1 of 5 Title Determine and describe construction of medium and large buildings Level 6 Credits 20 Purpose People credited with this unit standard are able to, for medium and large buildings, determine
More informationNational Certificate in Petrochemical Industry (Core) (Level 2)
NQF Ref 0977 Version 3 Page 1 of 6 National Certificate in Petrochemical Industry (Core) (Level 2) Level 2 Credits 65 This qualification is expiring. The last date to meet the requirements is 31 December
More informationNZQA registered unit standard version 2 Page 1 of 5. Operate x-ray and electronic scanning equipment in a prison environment
Page 1 of 5 Title Operate x-ray and electronic scanning equipment in a prison environment Level 4 Credits 5 Purpose This unit standard is for people working as officers in a prison environment and covers
More informationMaintain amenity trees and shrubs
Page 1 of 5 Maintain amenity trees and shrubs Level 3 Credits 8 Purpose People credited with this unit standard are able to: control weeds and ground cover under amenity trees and shrubs; describe irrigation
More informationSECURITY STAFF SERVICES Demonstrate knowledge of and operate electronic equipment as a security officer
1 of 5 level: 3 credit: 5 planned review date: March 2007 sub-field: purpose: Security This unit standard covers the use of electronic equipment for security s. People credited with this unit standard
More informationNZQA registered unit standard 738 version 5 Page 1 of 7
Page 1 of 7 Title Kiln dry timber Level 4 Credits 25 Purpose People credited with this unit standard are able to: demonstrate knowledge of kiln drying operations; demonstrate knowledge of dry and wet bulb
More informationNZQA registered unit standard version 1 Page 1 of 5. Identify and inspect road safety barrier systems on Infrastructure Works sites
Page 1 of 5 Title Identify and inspect road safety barrier systems on Infrastructure Works sites Level 4 Credits 10 Purpose People credited with this unit standard are able to: identify and explain road
More informationNZQA registered unit standard version 2 Page 1 of 5. Use a mini-crawler crane with outriggers to lift and place regular loads
Page 1 of 5 Title Use a mini-crawler crane with outriggers to lift and place regular loads Level 3 Credits 15 Purpose People credited with this unit standard are able to: prepare to lift and place regular
More informationNational Certificate in Concrete Product Manufacture (Masonry Product) (Level 3)
NQF Ref 1530 Version 1 Page 1 of 6 National Certificate in Concrete Product Manufacture (Masonry Product) (Level 3) Level 3 Credits 69 Purpose The National Certificate in Concrete Product Manufacture (Masonry)
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Describe drinking-water supply reticulation systems Level 5 Credits 8 Purpose People credited with this unit standard are able to describe: the reticulated services found on public and
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Slice and package bread in a plant bakery Level 4 Credits 10 Purpose This unit standard is for people working or intending to work in a plant bakery as a baking tradesperson. People credited
More informationNZQA registered unit standard version 3 Page 1 of 5. Infrastructure Works > Civil Plant Operation
Page 1 of 5 Title Operate a motor grader for earthworks Level 3 Credits 20 Purpose People credited with this unit standard are able to: prepare for grader operations; manoeuvre and control grader on site;
More informationCheck, coat and reinforce fibre cement substrate to form a Proprietary Plaster Cladding System on site
Page 1 of 5 Check, coat and reinforce fibre cement substrate to form a Proprietary Plaster Cladding System on site Level 3 Credits 20 Purpose People credited with this unit standard are able to: check
More informationNational Certificate in Water Reticulation (Supervisor) (Level 4) with strands in Water, and Wastewater Level 4
NZQF NQ Ref 1259 Version 2 Page 1 of 9 National Certificate in Water Reticulation (Supervisor) (Level 4) with strands in Water, and Wastewater Level 4 Credits 122-126 This qualification has been reviewed.
More informationSECURITY STAFF SERVICES Demonstrate knowledge of protective. Security
1 of 6 level: 3 credit: 7 planned review date: March 2007 sub-field: purpose: Security This unit standard is for people who work or intend to work in. People credited with this unit standard are able to:
More informationNZQA registered unit standard version 3 Page 1 of 5. Carry out automated assembly of wood packaging products
Page 1 of 5 Title Carry out automated assembly of wood packaging products Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge of the health and safety issues
More informationThis unit standard is expiring
Page 1 of 5 Title Apply intelligence analysis techniques to complete an intelligence product Level 5 Credits 15 Purpose People credited with this unit standard are able to: define the intelligence problem
More informationNZQA registered unit standard version 2 Page 1 of 5. Generate chlorine dioxide for wood pulp bleaching
Page 1 of 5 Title Generate chlorine dioxide for wood pulp bleaching Level 5 Credits 15 Purpose People credited with this unit standard are able to: explain fundamentals of chlorine dioxide generation;
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Display products in the salon environment Level 2 Credits 3 Purpose This unit standard is for entry-level learners working and intending to work in a salon People credited with this unit
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Assess the optimisation of a drinking-water treatment plant, and describe critical control points Level 5 Credits 10 Purpose People credited with this unit standard are able to: assess
More information