DACON INSPECTION SERVICES PIPELINE INSPECTION SERVICES
|
|
- Cathleen Scott
- 5 years ago
- Views:
Transcription
1 PIPELINE INSPECTION SERVICES
2 Who we are Conventional and Advanced NDT and Inspection Services Oil and Gas, Refinery, Petrochemical, Heavy Industry, Mining Over 400 personnel including more than 300 inspectors Thailand headquarters with International expertise since 1979
3 PIPELINE INSPECTION TECHNOLOGY
4 Intelligent Pigging Systems MFL (Magnetic Flux Leakage) UT (Ultrasonic Testing) Measurement Accuracy Result Availability Size and Weight Launching Medium Pipe Material Speed Range Cost Uses magnetic flux leakage technique to magnetize line and measure flux leakage. Results quoted as +/- 10% which means 20% margin of error. Can take 2 to 3 months with data analysis performed by expert. Large tools sometimes weighing hundreds of kilograms needing cranes to launch. Lifting equipment required and due to large size needs significant clearing. Can be used in most mediums including gas, liquid and multiphase. Bare carbon steel only and to a maximum thickness of 25mm Can travel at speeds of 1 to 5 meters per second making them ideal for long lines. Can travel many hundreds or thousands of kilometers. Cheap in comparison to other techniques but expensive compared to Dacon UT. Uses ultrasonic testing technique to take measurements at 1,600 times per second. Highest available accuracy with defects measured to within 0.1 mm. Instantly available after inspection with simple and easy to understand analysis. Small lightweight tools weighing around 20% of MFL tools of the same diameter. No lifting equipment required for tools up to 36" and can launch in restricted space. Works only in liquid filled lines although batching can be used in gas lines. Works on any material and on any thickness of pipe wall. Needs travel speed of 1 to 5 meters per second to be effective. Up to 100 kilometers is possible however up to 50 kilometers is ideal. Cost is 50% lower than other techniques and mobilization and launch is cheaper.
5 Dacon Specialize in UT
6 How UT Pigging Works Horizontally placed ultrasonic transducer sends sound waves horizontally. 45 rotating mirror directs the sound waves perpendicular towards the pipe wall. Signal reflects back to the transducer the same way it came. Difference in time between sent and received signal measured and recorded. Measurements of up to 1,600 times per second depending on the pipe diameter.
7 Ultrasonic Principle Electrical > Mechanical Vibration > Very High Frequency Sound Reflected Wave Object Sender / Receiver Original Wave Velocity = Distance Divided by Time
8 Measuring Defects Signal Analysis
9 Why use UT Limited access work areas are fine Metallic and non-metallic pipeline Most accurate / detailed inspection method Simple data analysis No wall thickness limitation Immediate onsite results Final report within 2 weeks Saves time and money for all the above reasons
10 Cost Comparison Real Cost Inspection + Excavation / Verification 350,000 $ 300,000 $ 250,000 $ 200,000 $ Excavation 150,000 $ +200% 100,000 $ 50,000 S 0 $ Excavation Mobilization ILI Mobilization ILI Excavation Mobilization ILI UT MFL
11 DATA ANALYSIS
12 Data Interpretation System Step Wedge 10 mm. GOOD 8 mm. 6 mm. MEDUIM 4 mm. 2 mm. BAD
13 Data Analysis B Scan Shows Wall Thickness Internal Wall External Wall Side View Of Defect C Scan Shows Defect Location in Pipeline Circumference Exact Remaining Wall Thickness At Crosshair Location Shows Longitudinal Location Of Defect
14 Data Analysis Software opens up the pipeline to display the data in an easy to understand format. B Scan Shows Wall Thickness C Scan Shows Defect Location In Pipeline Circumference
15 Actual Case Weld 1 Heavy Corrosion Weld 2 Weld 3
16 PIPELINE INSPECTION PROCRESS
17 Progressive Pigging Soft foam pig is launched to ensure there are no obstructions in the pipeline. Medium or hard density foam cleaning pigs are launched to clean the line and further detect for obstructions. Gauging pig is launched into the pipeline as a final check for obstructions, dents and ovalities that may cause problems. If gauging plate comes back in a satisfactory condition then the Intelligent Pig is launched and the pipeline data acquired. Data is downloaded directly from the pig to the Dacon data analysis system and an immediate initial assessment can be given.
18 CONFIDENCE
19 Simulation Tests Mock up your pipeline in our test yard Perform pull through test to ensure tool compatibility and effectiveness Witnessed by client Gives confidence that your pipeline will be inspected without any problems Test yard with full facilities is located in Thailand.
20 CASE STUDIES
21 Refinery Description Solution Result Benefit Refinery 12 Pigging Tool Successful Inspections No Lifting Equipment 12 x 4km Kerosene Line 6 Pigging Tool 7 Day Duration Needed 16 x 4kms Napta Line 3 Man Team Full Data Capture Saved $40K Mobilization Online Inspection Mobilize from Thailand Lines Fit For Service Costs Small Team With Small Footprint No Shutdown Needed
22 Offshore Oil and Gas Description Solution Result Benefit Offshore Platform to FPSO 6 UT Pigging Tool Specially Developed 2 Successful Inspection Successful Pass Through Small Team On Platform Saved USD$30K Pass Through Plem Body Tool Plem Mobilization Cost and Riser Tool Built & Tested By Successful Pass Through Cheaper Tool 6 x 5km Condensate Line Online Inspection R&D Team Tool Developed & Built Riser Line Fit For Service Development Costs Easy Client/Contractor in Thailand Interaction
23 Riser Inspection Description Solution Result Benefit Riser - Offshore Platform 6 x 20 Meters Urgent Due To Heavy Corrosion 6 Tethered UT Tool 2 Man Team Instant Reporting System Rapid Mobilization from Instant Report 79.5% Wall Loss Recommend To Shutdown Line Critical Situation Quickly Identified Fast Mobilization Within Asia Line Shutdown For Inspection Thailand Line Repaired API Qualified Inspectors Immediate Action Made Possible
24 Mining Description Solution Result Benefit Gold and copper mine 36 x 6km Tailings Line High Density Polyurethane Lines Specially Developed And Built Tool Global First Measures Wall Thickness Numerous Successful Inspections Meets Government Compliance Unique Solution Close Cooperation Minimized Costs Team Based Joint Mission Critical Results in HDPE Continued Safe Mine Solution Floatation For Subsea Operation Recovery Tools and System Stored On Site
25 Summary Asia Based With International Expertise Excellent Track Record Small, Lightweight Tools Easy Mobilization and Launch Extremely Accurate Simple Data Analysis Immediate Results Saves Time and Money
INSPECTION SERVICES FOR ALL YOUR INSPECTION NEEDS
INSPECTION SERVICES FOR ALL YOUR INSPECTION NEEDS COMPETENCE RELIABILITY CAN DO YOUR PARTNER FOR INSPECTION SERVICES Headquartered in Thailand our journey began 25 years ago in Norway from where we have
More informationAbout Dacon. Pipeline Services. Dacon. Dacon Inspection Services has been established in Asia since 1993, with offices in Singapore and Thailand.
Inspection Services has been established in Asia since 1993, with offices in Singapore and Thailand. About Pipeline Services 2 works closely with clients in the oil & gas, power, mining and petrochemical
More informationHDPE PIPELINE INSPECTION PRESENTATION
HDPE PIPELINE INSPECTION PRESENTATION Who we are Conventional and Advanced NDT and Inspection Services Oil and Gas, Refinery, Petrochemical, Heavy Industry, Mining Over 400 personnel including more than
More informationChevron North Sea Limited (CNSL) operates more than 25 pipelines across three operated assets in the UK North Sea: Alba, Captain and Erskine.
EFFECTIVE USE OF IN-LINE INSPECTION TECHNOLOGIES TO SUPPORT PIPELINE INTEGRITY MANAGEMENT By Peter Smith, Chevron North Sea Limited and Andrew Wilde, MACAW Engineering Ltd, UK Abstract Chevron North Sea
More informationDetecting metal loss and pipeline wall thinning with a combination of Ultrasonic Testing (UT) and Magnetic Flux Leakage (MFL)
Detecting metal loss and pipeline wall thinning with a combination of Ultrasonic Testing (UT) and Magnetic Flux Leakage (MFL) Wolfgang Krieg ROSEN Swiss AG Abstract In-line inspections with Ultrasonic
More informationAdvances In ILI Allow Assessing Unpiggable Pipelines. By Lisa Barkdull and Ian Smith, Quest Integrity Group, Houston
As seen in Pipeline & Gas Journal, August 2011 edition Advances In ILI Allow Assessing Unpiggable Pipelines By Lisa Barkdull and Ian Smith, Quest Integrity Group, Houston Advances in in-line inspection
More informationCapabilities of MFL Inspection in DUPLEX Steel Pipelines
Capabilities of MFL Inspection in DUPLEX Steel Pipelines Hendrik Aue and Werner Thale ROSEN Technology and Research Center Germany Am Seitenkanal 8, 49811 Lingen, Germany Age E. Pedersen and Samuel Moe
More informationInspection of water injection pipelines and future needs. By: Mikael Georgson and Roger Hunsbedt. Statoil ASA
Inspection of water injection pipelines and future needs By: Mikael Georgson and Roger Hunsbedt Statoil ASA Abstract Statoil ASA has recently inspected several water injection pipelines that have shown
More informationSPE MS. Copyright 2015, Society of Petroleum Engineers
SPE-177570-MS EVO Series 1.0 - Latest Generation of UT Crack and Corrosion Tools For High Speed Pipeline Inspection T. Hennig, NDT Global Corporate Ltd.; G. Lokwani, NDT Middle East Copyright 2015, Society
More informationIn-Line Inspection using Ultrasonic Technology
In-Line Inspection using Ultrasonic Technology Dr. Thomas Hennig NDT Global GmbH & Co KG Friedrich List Str. 1 76297 Stutensee Germany Jason Chan NDT Global Tampines Industrial Park A Tampines Street 93
More informationPIPELINE INTEGRITY SOLUTIONS
PIPELINE INTEGRITY SOLUTIONS Pipeline Integrity Management Services (PIMS) InVista Ultrasonic In-Line Inspection Technology Engineering Assessment and Consulting QuestIntegrity.com CHALLENGE CONVENTION
More informationPipeline Integrity. QuestIntegrity.com CHALLENGE CONVENTION
Pipeline Integrity Solutions Pipeline Integrity Management Services (PIMS) InVista Ultrasonic In-Line Inspection Technology Engineering Assessment and Consulting QuestIntegrity.com CHALLENGE CONVENTION
More informationON THE ISSUE OF INSPECTING CHALLENGING PIPELINES
ON THE ISSUE OF INSPECTING CHALLENGING PIPELINES Dr. Michael Beller, Tom Steinvoorte PPSA Seminar, Aberdeen, Nov. 18th 2015 CONTENT 1. Introduction 2. In-Line Inspection 3. Piggable vs. Unpiggable 4. Tool
More informationPreventing and Mitigating Corrosion to Advance Pipeline Integrity Pipeline Safety Trust Conference November 2, 2017 New Orleans, LA
Preventing and Mitigating Corrosion to Advance Pipeline Integrity 2017 Pipeline Safety Trust Conference November 2, 2017 New Orleans, LA Causes of Liquids Pipeline Releases 2012-2016 TOTAL RELEASES (2,100
More informationTUBE INSPECTION SOLUTIONS TUBE INSPECTION SOLUTIONS. Selection of heat exchanger tube inspection techniques
TUBE INSPECTION SOLUTIONS 1 TUBE INSPECTION SOLUTIONS Selection of heat exchanger tube inspection techniques 2 TUBE INSPECTION SOLUTIONS THIS PERSONAL WORKBOOK BELONGS TO First name Lastname Address City
More informationHDPE PIPELINE INSPECTION PRESENTATION
HDPE PIPELINE INSPECTION PRESENTATION Presentation Overview HDPE used as Tailings Lines for mining Erosion in HDPE lines Dacon s involvement HDPE Pipe Development Inspection Accuracy Data Comparison vs.
More informationSIMPLIFYING PIPELINE INSPECTION. THE INTEGRATION OF ADVANCED EDDY CURRENT SENSORS ONTO CONVENTIONAL FOAM PIGS. By: Steve Banks i2i Pipelines Ltd UK
SIMPLIFYING PIPELINE INSPECTION. THE INTEGRATION OF ADVANCED EDDY CURRENT SENSORS ONTO CONVENTIONAL FOAM PIGS. Abstract By: Steve Banks i2i Pipelines Ltd UK Pigging tools for pipelines are typically dominated
More informationAPPLYING ULTRASOUND FOR IN-LINE INSPECTION: FACTS AND ISSUES. By Dr. Michael Beller, NDT Systems & Services AG, Stutensee, Germany
APPLYING ULTRASOUND FOR IN-LINE INSPECTION: FACTS AND ISSUES Abstract By Dr. Michael Beller, NDT Systems & Services AG, Stutensee, Germany 1. In-Line Inspection Today the use of in-line inspection tools
More informationSubsea Pipeline Inspection Riser Annulus Testing Riser Repair Subsea Structural Assessment and Life Extension Mooring Inspection & Monitoring
RusselSmith is an ISO 9001:2015 certified Integrated Oilfield Services provider, incorporated to serve the needs of the global oil and gas exploration and production industry. Our value proposition to
More information3D 3D SCANNING SOLUTION FOR FOR PIPELINE INTEGRITY ASSESSMENT
NDT SOLUTIONS 3D 3D SCANNING SOLUTION FOR FOR PIPELINE INTEGRITY ASSESSMENT CODE-COMPLIANT CODE-COMPLIANT Pipeline operators and NDT service companies are facing an increasing pressure from regulation
More informationSTRESS CHARACTERIZATION BY LOCAL MAGNETIC MEASUREMENTS
STRESS CHARACTERIZATION BY LOCAL MAGNETIC MEASUREMENTS P.lvanov, Y.Sun, L.Udpa, S.S.Udpa and W.Lord Department of Electrical and Computer Engineering Iowa State University, Ames, Iowa INTRODUCTION The
More informationA comparison of DCVG measurements with in-line inspection results on a pipeline under AC influence
A comparison of DCVG measurements with in-line inspection results on a pipeline under AC influence K. Reber, TÜV Rheinland Industrie Services GmbH, Germany For a pipeline known to be under the influence
More informationDEVELOPMENT OF A SUCCESSFUL UNTETHERED LEAK DETECTION AND PIPE WALL CONDITION ASSESSMENT TECHNOLOGY FOR LARGE DIAMETER PIPELINES
DEVELOPMENT OF A SUCCESSFUL UNTETHERED LEAK DETECTION AND PIPE WALL CONDITION ASSESSMENT TECHNOLOGY FOR LARGE DIAMETER PIPELINES Hugh Chapman, General Manager Aqua Environmental ABSTRACT Leak detection
More informationNEW TECHNOLOGIES OF SPETSNEFTEGAZ MAGNETIC IN-LINE INSPECTION
NEW TECHNOLOGIES OF SPETSNEFTEGAZ MAGNETIC IN-LINE INSPECTION By: Dr.V.A. Kanaykin, Dr.B.V.Patramanskiy, Dr.V.E.Loskutov Spetsneftegaz NPO JSC, Russia For the period from 1991 to 1995, Spetsneftegaz scientists
More information36A0 INSPECTION Stephan Falter, Baker Hughes, a GE company, Germany,
A 360 INSPECTION Stephan Falter, Baker Hughes, a GE company, Germany, details how innovations can enhance confidence in the operational integrity of seamless tube and pipe. S eamless tube and pipe is widely
More informationPipeline Oil & Gas Equipment, Inc.
Pipeline Oil & Gas Equipment, Inc. Web Page: www.pipe-equip.com - E-Mail: info@pipe-equip.com Tel: (936) 321 6963 - Fax: (936) 273 5150 WHERE Quality IS OUR, HIGHEST PRIORITY At Pipeline Oil & Gas Equipment,
More informationPigging Products & Services
Pigging Products & Services The Sagebrush Difference Technology Sagebrush pipeline pigging technologies provide a wide spectrum of standard and custom solutions for maintaining and protecting valuable
More informationDEVELOPMENT OF A SUCCESSFUL INTERNAL LEAK DETECTION AND PIPELINE CONDITION ASSESSMENT TECHNOLOGY FOR LARGE DIAMETER PIPES.
DEVELOPMENT OF A SUCCESSFUL INTERNAL LEAK DETECTION AND PIPELINE CONDITION ASSESSMENT TECHNOLOGY FOR LARGE DIAMETER PIPES Paper Presented by: Hugh Chapman Author: Hugh Chapman, General Manager, Aqua Environmental
More informationPulsed Eddy Current Testing (PECT) Inspection Technique
Introduction Pulsed Eddy Current Testing (PECT) is an inspection technique used for corrosion under insulation (CUI) screening on carbon steel structures as pipes, vessels, tanks and spherical tank legs
More informationDevelopment and validation of an automated ultrasonic system for the non-destructive evaluation of welded joints in thermoplastic storage tanks
Development and validation of an automated ultrasonic system for the non-destructive evaluation of welded joints in thermoplastic storage tanks Abstract Malcolm Spicer, Fredrik Hagglund and Mike Troughton,
More informationSpecialized Pipeline Integrity Services OPERATIONAL PIGGING INTELLIGENT PIGGING PRE-COMMISSIONING
Specialized Pipeline Integrity Services OPERATIONAL PIGGING INTELLIGENT PIGGING PRE-COMMISSIONING Operational PIGGING View of platform from crewboat From top to bottom: 32 pig retrieval Brush pig before
More informationASSESSMENT OF THE EFFECTIVENESS OF CLEANING PROGRAMMES
ASSESSMENT OF THE EFFECTIVENESS OF CLEANING PROGRAMMES By: David Russell, Project Manager, Reserach and Development, Pipeline Engineering Chris Marshall, Project Manager, Pipeline Engineering Abstract
More informationCalScan TM EP Executive Summary. In-Line Inspection. Prepared for: SEICO Date issued: October 8, 2009 PII reference number:
CalScan TM EP Executive In-Line Inspection Prepared for: Date issued: October 8, 2009 PII reference number: 110357 CalScan TM EP - High Resolution Geometry Inspection In 2002, GE Oil & Gas began development
More informationFeeler Pig A New Tool for Multi-Size Pipeline Inspection
ECNDT 2006 - Tu.3.1.4 Feeler Pig A New Tool for Multi-Size Pipeline Inspection Claudio CAMERINI, Carla MARINHO, Aldo FRANZOI, Sergio IBAJÉ, Petrobras, Rio de Janeiro, Brazil Miguel FREITAS, Jean von der
More informationULTRASONIC IN-LINE INSPECTION: HIGH RESOLUTION CRACK DETECTION FOR PIPELINES USING A NEW GENERATION OF TOOLS
ULTRASONIC IN-LINE INSPECTION: HIGH RESOLUTION CRACK DETECTION FOR PIPELINES USING A NEW GENERATION OF TOOLS A. Barbian 1, M. Beller 1, K. Reber 1, N. Uzelac 2, H. Willems 1 1 NDT Systems & Services AG;
More informationSoftware and Inspection Advances in Pipeline Integrity Assessment
Software and Inspection Advances in Pipeline Integrity Assessment S.F. (Steve) Biagiotti, Jr., M.Sc., P.E., Risk Engineering Manager, Bass-Trigon Software P. P. (Paul) Guy, Eastern Manager Pipeline Integrity
More informationASSET MONITORING PREVENTIVE MAINTENANCE COMPLIANCE & SAFETY
ASSET MONITORING PREVENTIVE MAINTENANCE COMPLIANCE & SAFETY APC Integrity Technologies OUR VISION APC is in the INTEGRITY business with focus on supporting pipeline and facility operators with TECHNOLOGIES
More informationIN-LINE INSPECTION OF PIPES USING CORROSION RESISTANT ALLOYS (CRA) M.Sc. Johannes Keuter PPSA Seminar Aberdeen 19-Nov-2014
IN-LINE INSPECTION OF PIPES USING CORROSION RESISTANT ALLOYS (CRA) M.Sc. Johannes Keuter PPSA Seminar Aberdeen 19-Nov-2014 CONTENT 1. Challenge 2. Technical Solution 3. Summary Slide 2 CHALLENGE Definition
More informationFast Corrosion Screening Technique Saturation Low Frequency Eddy Current
Summary The inspection of ferromagnetic and non-ferromagnetic material components is an attractive and efficient method due to its fast screening of large areas with low surface preparations. Already qualified
More informationI. COMPARSION OF CORROSION MONITORING SYSTEMS IN THE OIL AND GAS INDUSTRY
Quality on the Move! Corporate Headquarters: 2449 West Park Avenue P.O. Box 1690 Gray, LA 70359 www.nvindt.com T: 1-877-638-6841 F: 985-876-9355 info@nvindt.com I. COMPARSION OF CORROSION MONITORING SYSTEMS
More informationAcoustic Methods for Determining Remaining Pipe Wall Thickness in Asbestos Cement and Ferrous Pipe
Acoustic Methods for Determining Remaining Pipe Wall Thickness in Asbestos Cement and Ferrous Pipe Asia Water, 27th March 2012 Mark Nicol, Regional Manager Asia Pacific Presentation Outline Why do we need
More informationCOMPOSITES - CASE STUDIES OF PIPELINE REPAIR APPLICATIONS. By Andrew J. Patrick, Clock Spring Company, L.P., Huntingdon, UK
COMPOSITES - CASE STUDIES OF PIPELINE REPAIR APPLICATIONS By Andrew J. Patrick, Clock Spring Company, L.P., Huntingdon, UK ABSTRACT Composite repairs have been utilised within the transmission pipeline
More informationADVANCED POSSIBILITIES FOR CORROSION INSPECTION OF GAS PIPELINES USING EMAT TECHNOLOGY
ADVANCED POSSIBILITIES FOR CORROSION INSPECTION OF GAS PIPELINES USING EMAT TECHNOLOGY H. WILLEMS 1, B. JASKOLLA 1, T. SICKINGER 1, O.A. BARBIAN 1, F. NIESE 2 (1) NDT Systems & Services, Stutensee, Germany
More informationBelow the Surface: The Importance of Mechanical Integrity at Your Plant. ERI Solutions Inc. All Rights Reserved.
Below the Surface: The Importance of Mechanical Integrity at Your Plant Introduction ERI Solutions Inc. (ERI) founded in 2003 to develop insurance markets and standards for the growing ethanol industry.
More informationGas Holder Tank Maintenance, Design, Fabrication & Installation
Pipework Maintenance, Design, Fabrication & Installation Structural Steelwork Maintenance, Design, Fabrication & Installation Gas Holder Tank Maintenance, Design, Fabrication & Installation Under Pressure
More informationPipeline inspection using EMAT.
More info about this article: http://www.ndt.net/?id=21133 Pipeline inspection using EMAT. SuvenduLenka. NDT Training Consultancy and Inspection Services Pvt.Ltd. Plot No.: FF/11, Civil Township, Rourkela-769004.Odisha.
More informationAssuring Ohio Pipeline Safety
Assuring Ohio Pipeline Safety Robert E. Burns, Esq. Consultant & Retired Research Specialist The National Regulatory Research Institute @ The Ohio State University Presented to the Energy Infrastructure
More informationDevelopment and Validation of an Automated Ultrasonic System for the Non- Destructive Evaluation of Welded Joints in Thermoplastic Storage Tanks
More Info at Open Access Database www.ndt.net/?id=16619 Development and Validation of an Automated Ultrasonic System for the Non- Destructive Evaluation of Welded Joints in Thermoplastic Storage Tanks
More informationSolutions for the Mining Industry ensure performance at highest level
Solutions for the Mining Industry ensure performance at highest level What we offer In the highly demanding mining industry, plant availability, extended life-cycles and minimized down time are high commercial
More informationDNV-RP-F101 Checker. User Manual
DNV-RP-F101 Checker User Manual For Version: 1.0.0 Copyright 2010-2017 OPIMsoft Technology Co., Ltd. All Rights Reserved. INDEX 1 FUNCTION... 1 2 INSTALLATION... 2 3 HOW TO USE... 3 3.1 Getting Started...
More informationTFC KAOHSIUNG FACTORY 30 KMT AMMONIA STORAGE TANK INSPECTION REPORT. By: Jackson Yang (TFC R&D Department) 01 Oct 2016
TFC KAOHSIUNG FACTORY 30 KMT AMMONIA STORAGE TANK INSPECTION REPORT By: Jackson Yang (TFC R&D Department) 01 Oct 2016 1 CONTENT 1. Introduction 2. Internal Inspection Planning 3. Applied Inspection Technique
More informationHigh Temperature Ultrasonic Scanning
ABSTRACT High Temperature Ultrasonic Scanning R. J. Carswell Saudi Aramco Dhahran, Saudi Arabia Corrosion is one of the Petrochemical Industry s leading causes of equipment failure, repair, and replacement.
More informationGIS-enabled ILI Repair Prioritization and Follow-Up. An integrated workflow from the submission of the Final Report to the Validation of Dig Results.
GIS-enabled ILI Repair Prioritization and Follow-Up An integrated workflow from the submission of the Final Report to the Validation of Dig Results. ROSEN Integrity Solutions GmbH Markus Brors 24-October-2011
More informationDedicated Partner of Pigging and Pipeline Products.
Dedicated Partner of Pigging and Pipeline Products www.polyeurope.com Welcome Who we are PolyEurope BV is a privately owned company located in the heart of The Netherlands. Founded in 1974, the company
More informationTransmission Pipeline Opportunities. Advancing Project Development in India through Public Private Partnerships
Transmission Pipeline Opportunities Advancing Project Development in India through Public Private Partnerships 22 23 February, 2007 Pipeline Maintenance and Repair: Agenda Methane Losses from Pipeline
More informationNDT SOLUTIONS 3D SCANNING SOLUTION CODE-COMPLIANT FOR PIPELINE INTEGRITY
NDT SOLUTIONS CODE-COMPLIANT 3D SCANNING SOLUTION FOR PIPELINE INTEGRITY Pipeline operators and NDT service companies are facing increasing pressure from regulatory authorities and environmental groups
More informationUSM Vision 1.2 A Total Weld Inspection Solution to Increase Productivity in New Process Pipework Fabrication
GE Measurement & Control NEW USM Vision 1.2 A Total Weld Inspection Solution to Increase Productivity in New Process Pipework Fabrication 16/128 Parallel scanning Linear scan More channels Introduction
More information1. Comparison of Inspection Methods
NDT.net - The e-journal of Nondestructive Testing (May 2008) For more papers of this publication click: www.ndt.net/search/docs.php3?mainsource=25 Weld Inspection with EMAT Using Guided Waves Borja LOPEZ
More informationPulsed Eddy-Current (PEC) Inspection through Insulation
INDUSTRIAL SERVICES WHITE PAPER PULSED EDDY CURRENT Pulsed Eddy-Current (PEC) Inspection through Insulation Method statement of an advanced non-destructive testing technique for inspection through insulation.
More informationINTRODUCTION TO ULTRASONIC IN-LINE INSPECTION OF CRA PIPELINES. Herbert Willems, Gerhard Kopp NDT Global, Germany
INTRODUCTION TO ULTRASONIC IN-LINE INSPECTION OF CRA PIPELINES Herbert Willems, Gerhard Kopp NDT Global, Germany ABSTRACT Pipelines manufactured from corrosion-resistant alloys (CRA) are becoming more
More informationIn-line Inspection Systems Qualification Standard
In-line Inspection Systems Qualification Standard API STANDARD 1163 FIRST EDITION, AUGUST 2005 In-line Inspection Systems Qualification Standard Pipeline Segment API STANDARD 1163 FIRST EDITION, AUGUST
More informationFEASIBILITY STUDY FOR AN UNPIGGABLE SUBSEA PIPELINE A CASE STUDY OF AN OFFSHORE PIPELINE
FEASIBILITY STUDY FOR AN UNPIGGABLE SUBSEA PIPELINE A CASE STUDY OF AN OFFSHORE PIPELINE James Stewart, Inessa Yablonskikh, Baker Hughes, a GE company (BHGE) ABSTRACT Managing the long-term integrity of
More informationAdvancements in Imaging Corrosion Under Insulation (CUI) for Piping and Vessels
ASNT Annual Conference 2013 Las Vegas, Nevada, 4-7 November 2013 Advancements in Imaging Corrosion Under Insulation (CUI) for Piping and Vessels Scott Denenberg, Don Straney, Todd Dunford, Yanko Sheiretov,
More informationwww.gete-ndtjordan.com OUR SERVICES With this association, we are able to provide testing and Inspection service in all kind of Non- Destructive Testing for Oil and Gas industries. Including exploration,
More informationInnovative Solutions Solving the Problems of Industrial Inspection, Maintenance and Repair
Innovative Solutions Solving the Problems of Industrial Inspection, Maintenance and Repair 4127 Hollister St., Suite A Houston Ph: (713) 460-4001 Fax: (713) 996-7752 www.mhtgroup.net Texas 77080 MHT Company
More informationADVANCE TECHNOLOGIES FOR HEAT EXCHANGER TUBING HOW THEY ARE BEING USED IN TODAYS INDUSTRY
ADVANCE TECHNOLOGIES FOR HEAT EXCHANGER TUBING HOW THEY ARE BEING USED IN TODAYS INDUSTRY Applications for Asset Protection Solutions Copyright 2010 Proprietary Information: no dissemination, use or duplication
More informationBENEFITS OF THE USE OF HIGH-BYPASS DE-SANDING PIGS IN CONJUNCTION WITH BRUSH PIGS FOR OPERATIONAL PIPELINE CLEANING. By: Paul Otway, Jee Limited, UK
BENEFITS OF THE USE OF HIGH-BYPASS DE-SANDING PIGS IN CONJUNCTION WITH BRUSH PIGS FOR OPERATIONAL PIPELINE CLEANING By: Paul Otway, Jee Limited, UK Abstract The use of high-bypass de-sanding pigs, either
More informationAMENDMENTS TO OPSS 1802 (JAN 95) MATERIAL SPECIFICATION FOR SMOOTH WALLED STEEL PIPE SUPPLY, STORAGE, AND DELIVERY OF WELDED STEEL PIPE
Works and Emergency Services CITY OF TORONTO WATER AND WASTEWATER SERVICES STANDARD CONSTRUCTION SPECIFICATIONS TS 1802 June 2001 AMENDMENTS TO OPSS 1802 (JAN 95) MATERIAL SPECIFICATION FOR SMOOTH WALLED
More informationGas Transmission and Distribution Piping Systems
ASME B31.8-2007 (Revision of ASME B31.8-2003) Gas Transmission and Distribution Piping Systems ASME Code for Pressure Piping, B31 AN AMERICAN NATIONAL STANDARD Three Park Avenue New York, NY 10016 CONTENTS
More informationNDE Techniques for Water and Wastewater Pipe Condition Assessment
North American Society for Trenchless Technology (NASTT) No-Dig Show 2012 Nashville, TN March 11-15, 2012 Paper A-6-05 NDE Techniques for Water and Wastewater Pipe Condition Assessment Chris Garrett 1,
More informationAPC Corrosion & Thickness Monitoring Solution
APC Corrosion & Thickness Monitoring Solution with A 3 M spoton U Permanently-installed real-time internal corrosion and erosion monitoring solution designed to operate in most environments and locations.
More informationMonitoring Asset Integrity Using Installed Ultrasonic Sensors
Monitoring Asset Integrity Using Installed Ultrasonic Sensors May 25, 2016 Sensor Networks, Inc. Steve Strachan V.P. Sales North America Outline Motivation Inspection vs. monitoring/trending Power of Data
More informationMETAL PRODUCTS PIPELINE ENGINEERING. Engineered Products for the Pipeline Pigging and Flow Assurance Industry
METAL PRODUCTS 1 2 3 PIPELINE ENGINEERING Engineered Products for the Pipeline Pigging and Flow Assurance Industry Engineered Products for the Pipeline Pigging and Flow Assurance Industry Pipeline Engineering
More informationCondition Assessment of Pipeline Systems Within Power Generating Plants
Condition Assessment of Pipeline Systems Within Power Generating Plants Condition Assessment of Pipeline Systems within Power Generating Plants Many cities depend on safe, reliable power delivered from
More informationFigure 1. A 42 in. SCP project in an ultra high velocity pipeline. SEPTEMBER 2012 Reprinted from World Pipelines
NIGEL MONEY, TECHNICAL DIRECTOR, PIPELINES2DATA LTD, UK, AND GARY SMITH, PRESIDENT, INLINE SERVICES INC., USA, PRESENT A NEW SPEED CONTROL PIG UP TO THE TASK. Figure 1. A 42 in. SCP project in an ultra
More informationMECHANICAL ENGINEERING ESSENTIALS SECTOR / ENGINEERING
MECHANICAL ENGINEERING ESSENTIALS SECTOR / ENGINEERING TECHNICAL & CERTIFICATE OF ATTENDANCE TRAINING COURSE The Mechanical Engineering Essentials Training Course Will Enable Technical Personnel To Familiarise
More informationPipeline Integrity Management
Pipeline Integrity Management Alberta-Korea Pipeline Safety Seminar Daegu, South Korea June 2, 2016 Brian Wagg Director, Business Development C-FER Technologies Edmonton, Alberta, Canada Overview Introduction
More informationPIPELINE AND WELL INTEGRITY MANAGEMENT
FORCE Technology NORWAY AS Foto: BP - Valhall Lifetime assessment of pipelines and wells PIPELINE AND WELL INTEGRITY MANAGEMENT Speaker Håkon Hallem FORCE Technology NORWAY AS Head of Department Integrity
More informationIntegrity Management of CRA Pipelines. Operator Experiences and Integrity Challenges
Operator Experiences and Integrity Challenges 2015 Foreword Although CRA materials are selected for their increased resistance to degradation in certain operating environments, Operators have suffered
More informationPRACTICAL SOLUTIONS FOR CHALLENGING PIPELINES. BY: Tom Steinvoorte, ROSEN Europe, The Netherlands
PRACTICAL SOLUTIONS FOR CHALLENGING PIPELINES BY: Tom Steinvoorte, ROSEN Europe, The Netherlands ABSTRACT As the overall infrastructure in the oil and gas industry is aging there is an increasing demand
More informationForm-measuring Multi Channel PIG of PVM Line
Form-measuring Multi Channel PIG of PVM Line PVM-06 1. APPLICATION 1.1.Area of application of multi channel form-measuring PIGs of PVM line is measuring of dimensions in cross-section of a pipeline with
More informationAdvances in Condition Assessment Technologies for Pipelines
Advances in Condition Assessment Technologies for Pipelines March, 2012 Cliff Jones Wachs Water Services Condition Assessment All pipes/ pipe materials leak All pipes can break 1 in 10 leaks will result
More informationSGS IS THE WORLD S LEADING INSPECTION, VERIFICATION, TESTING AND CERTIFICATION COMPANY
SGS IS THE WORLD S LEADING INSPECTION, VERIFICATION, TESTING AND CERTIFICATION COMPANY 1 AT A GLANCE Nº1 80,000 1,650 WORLD LEADER EMPLOYEES OFFICES AND LABORATORIES GLOBAL 14 SERVICE GLOBAL LOCAL INDUSTRIES
More informationTypes of Defects TPI. Mill/Constr. defects. lightning. AC corrosion. Old joints. Landslid. Corrosion. Weld defects
) Distance (mm) 0.000 20.00 40.00 60.00 80.00 100.0 120.0 140.0 160.0 180.0 200.0 220.0 240.0 260.0 280.0 300.0 320.0 22.00 22.50 23.00 23.50 24.00 24.50 25.00 25.50 26.00 26.50 27.00 27.50 28.00 28.50
More informationWelcome to. FORCE Technology
Welcome to FORCE Technology Eddy Current Inspection Tube inspection and analyses Fast automated inspection Optimized inspection Steel, stainless steel, etc. Eddy Current Inspection Tube inspection and
More informationwww.niagara-testing.com XYZ Mining Company XYZ Mine SAG Mill Gear Nondestructive Testing Report and Summary Provided by: Niagara Testing West Corporation Tucson, Arizona 85737 Steven Jacobs, Cell (520)
More informationDesign of pipelines for Guided Wave testing (GWT) Mark J. EVANS 1, Thomas K. VOGT 1
11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic Design of pipelines for Guided Wave testing (GWT) Mark J. EVANS 1, Thomas K. VOGT 1 1 Guided
More informationIndustrial Diagnostics Soundness you can count on ---
Industrial Diagnostics Soundness you can count on --- The Challenge Sound steel for modern structures Typically, steel products must fulfill a number of requirements. Whether semi-finished products for
More informationCompany Profile. Atlas Offshore Co. No.8, Negar Ave. Vali e Asr St., Tehran, Iran
Company Profile Atlas Offshore Co. No.8, Negar Ave. Vali e Asr St., Tehran, Iran +98 21 88774544 +98 21 88790572 Table of Contents About US........ 2 Our Capabilities.. 3 Work shop / Storage... 4 EPC Services
More informationAUTOMATED ULTRASONIC TESTING PA & TOFD
ATIC ADVANCED NDT SERVICES AUTOMATED ULTRASONIC TESTING OF CROSS COUNTRY PIPELINE (AUT) PHASED ARRAY (PA) ULTRASONIC TESTING TIME OF FLIGHT DIFFRACTION TESTING (TOFD) ECT, RFT, MFL TUBE INSPECTION INTERNAL
More informationNondestructive Testing
Nondestructive Testing Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka Nondestructive inspections fundamentals Classification of nondestructive inspections Radiographic inspection Magnetic particle
More informationTransmission Integrity Planning Best Practices
Transmission Integrity Planning Best Practices Paul Amato V.P. of Engineering, Operation, Environmental, Health and Safety Matthew Bell Engineering Specialist, Cathodic Protection Company Profile Commenced
More informationExperience the Benefits
Experience the Benefits Real time sensory technology and expert consultancy from SMS Cost Reduction Enhanced Safety Increased Production Performance Providing award winning expertise - making a genuine
More informationINTRODUCTION. Traditional way to ensure the quality of BF and EF welded joints in PE pipes during installation
Ultrasonic Phased Array Non-Destructive Testing and In-Service Inspection System for high integrity Polyethylene Pipe Welds with automated analysis software INTRODUCTION Traditional way to ensure the quality
More informationStructural Integrity and NDE Reliability I
Structural Integrity and NDE Reliability I Influence of Uncertainties in NDT on the Assessment of the Integrity of Components S. Dugan, X. Schuler, G. Wackenhut, S. Zickler Materials Testing Institute
More informationUsing Condition Assessment to more Efficiently Manage your Pipelines
Using Condition Assessment to more Efficiently Manage your Pipelines Traditional Management Approach Prioritize Pipelines Replace Pipelines Traditionally, prioritizations were based on age, material and
More informationC.P. data, CIPS & DCVG techniques: another way to predict Corrosion on Gas Pipeline.
23 rd World GAS Conference, Amsterdam 26 C.P. data, CIPS & DCVG techniques: another way to predict Corrosion on Gas Pipeline. A.Taberkokt ALGERIA 1 ABSTRACT One of the most important care of gas operators
More informationUnderstanding Pipeline Long Range Guided Wave Ultrasonic Testing & Interpretation of Results
Understanding Pipeline Long Range Guided Wave Ultrasonic Testing & Interpretation of Results Why: Long Range Guided Wave Ultrasonic (LRGWU) testing equipment and results have improved greatly in the last
More informationHigh Resolution Ultrasonic In-Line Inspection Using InVista at the Ain Dar Area Project in Saudi Aramco
Asset Longevity Plant & Pipeline Performance MENDT 2012 High Resolution Ultrasonic In-Line Inspection Using InVista at the Ain Dar Area Project in Saudi Aramco By: Mohammed Al-Hamad Quest Integrity Group,
More informationNDT of Rail Welds during the Construction of the Rapid Transportation System in Kaohsiung
ECNDT 2006 - Th.1.4.4 NDT of Rail Welds during the Construction of the Rapid Transportation System in Kaohsiung CHEN Pi-Kurn, China Steel Corporation, Kaohsiung, Taiwan Abstract. A railway line consists
More information