2. 0 Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.

Size: px
Start display at page:

Download "2. 0 Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards."

Transcription

1 SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF TEXTILES WOVEN SHIRTINGS MADE OF COTTON MAN MADE FIBRES/ FILAMENTS AND THEIR BLENDS ACCORDING TO IS 1585: Laboratory A laboratory shall be maintained which shall be suitably equipped and staffed to carry out the different tests in accordance with the methods given in the Indian Standards.. 0 Test Records All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards..1 Copies of any records that may be required by BIS shall be made available at any time on request.. Quality Control It is recommended that, as far as possible, Statistical Quality Control(SQC) methods may be used for controlling the quality of the products as envisaged in this Scheme [See IS 397 (Part 1): 003, IS 397(Part ):003 and IS 397 (Part 3):003]...1 The instruments/equipments are required to be brought under calibration control, as per frequency to be decided depending upon the usage..3 In addition, effort should be made to gradually introduce a Quality Management System in accordance with IS/ISO 9001: Standard Mark The Standard Mark(s) as given in Column (l) of the first Schedule of the licence shall be stamped or stenciled on face plaint of each piece/cutoff fabric as also, at every meter near one of the selvedges of the fabric as also, at every meter near one of the selvedges of the fabric and also on bales/case of fabric as the case may be provided always that the said fabric to which the Mark is thus applied conforms to every requirement of the specification. 4.0 Marking In additions, the following information should be given on each piece/cut and bale/case of fabric. a) Name of the material and blend composition; b) Nominal length and width; c) Mass in g/m ; d) Manufacturer s name, initials or trade mark; e) Month and year of manufacture; f) Any other information required by the law in force; and g) BIS Licence No. (CM/L ); 4.1 The manufacturer shall comply with the requirement of cl. 5. of IS 1585 with respect the care and maintance of woven shirting.

2 5.0 Packing The cloth shall be packed in conformity with the procedure, laid down in IS 194, or IS 195 or as agreed upon between the bayer and seller. 6.0 Yarn The yarn used in the manufacture of fabric shall conform to the requirement of clause 3.1 of the specification. 7.0 Level of Control The tests a s indicated in Table 1 and at levels of control specified there in shall be carried out on the whole production of the factory covered by the scheme and appropriate records and charts maintained in accordance with clause.0 above. All the production which conform to the Indian Standard and covered by this licence shall be marked with certified Mark of the Bureau. 8.0 Control For the purpose of this scheme, a control unit is defined as the entire quantity of Textile woven shirtings made of cotton, manmade fibre/filaments and their blends processed under similar conditions in single day. 9.0 In case a sample fails in respect to breaking strength requirement, two more samples shall be drawn and tested for that requirement. The Control shall be marked only if both the samples conform the requirements specified. In case of any failure control unit represented by these samples shall be rejected and not marked In respect of all there clauses of this specification and at all stages of manufacture, the factory shall maintain appropriate controls and checks to ensure that the product conforms to the various requirements f the specification Rejection A separate record shall be maintained giving information relating to the rejection of units of Textile woven shirtings made of cotton, manmade fibre/filament and their blends, which do not conform to the specification and the method of their disposal. Such material, if packed in containers, shall in no case be stored together with that conforming to the specification. 1.0 Samples The licensee shall supply, free of charge, the sample or samples required in accordance with the Bureau of Indian Standards (Certification) Regulations from his factory or godown. BIS shall pay for the samples taken by it from the open market Replacement Whenever a complaint is received soon after the goods with the Standard Mark have been purchased and used, and if there is adequate evidence that the goods have not been misused, defective goods or their components shall be replaced or repaired free of cost by the licensee in case the complaint is proved to be genuine and the warranty period (where applicable) has not expired. The final authority to judge conformity of the product to the Indian Standard shall be with BIS. The firm should have its own complaint investigation systems as per IS/ISO In the event of any damages caused by the goods bearing the Standard Mark, or claim being filed by the consumer against BIS Standard Mark and not "conforming to" the relevant Indian Standard, entire liability arising out of such non conforming product shall be of licensee and BIS shall not in any way be responsible in such cases.

3 15.0 Stop Marking The marking of the product shall be stopped under intimation to BIS, if at any time, there is some difficulty in maintaining the conformity of the product to the specification or the testing equipment goes out of order. The marking may be resumed as soon as the defects are removed under intimation to BIS. The marking of the product shall be stopped immediately if directed to do so by BIS for any reason. The marking may then be resumed only after permission by BIS. The information regarding resumption of marking shall also be sent to BIS Production Data The licensee shall send to BIS as per the enclosed proforma to be authenticated by a Chartered Accountant or by the manufacturer by giving an affidavit /undertaking, a statement of quantity produced, marked and exported by him and the trade value thereof end of each operative year of the licence.

4 TEST DETAILS Test Method IS 1585:009 TEXTILE WOVEN SHIRTINGS MADE OF COTTON, MANMADE FIBRES/FILAMENTS AND THEIR BLENDS Table 1 Levels of Control (Para 7 of the Scheme of Testing and Inspection) No. of Samples Clause Requirements Clause Reference 3.1 Yarn :009 Each or consignment LEVELS OF CONTROL Lot Size Frequency Remarks Each consignment Table Nominal count of warp IS 344 One One Control 1. (i) and weft yarns (ii) Length IS 1954 Each Cut Every Control No testing is required if the material is ISI marked or else accompanied by a test certificate from the manufacturer. (iii) Overall Width IS 1954 One One Control (iv) Threads/dm IS 1963 Two One Control (v) Mass (g/m ) IS1964 One Control (vi) Fibre Composition IS 1564 bobbin of A day s IS 1889 (Pt 4) yarn production of IS 005 one count of IS 176 yarn of same IS 177 quality IS 3416 (Pt 1) IS 341 Once a week Every Control Once a week or earlier, wherever there is a mixing change, if the blending is done at Blow Room stage. If the blending is done at Draw Frame stage, this requirement has to be tested every day. Fiber composites shall be tested at yarn stage. In case yarn is bought from outside for fibre Composition the acceptance of yarn for further processing shall be on the basis of sampling and criteria for conformity.

5 TEST DETAILS Test Method Clause Requirements Clause Reference IS 1585:009 TEXTILE WOVEN SHIRTINGS MADE OF COTTON, MANMADE FIBRES/FILAMENTS AND THEIR BLENDS Table 1 Levels of Control (Para 7 of the Scheme of Testing and Inspection) No. of Samples LEVELS OF CONTROL Lot Size Frequency Remarks (vii) Breaking strength warp and weft direction IS One Control Every Control (viii) Tear strength IS Every Control (ix) Dimensional stability to dry IS One Control Once a week heat (x) Soil release efficiency IS (xi) Limited flame Spread IS (Pt 4) 1 (xii) Crease recovery angle IS (xiii) Pilling resistance IS (xiv) Dimensional change on washing IS (xv) Abrasion resistance IS (xvi) ph value of aqueous extract IS If sample fails, two more samples for the same control unit drawn and tested. Both samples should pass the test other wise the control unit is rejected.

6 TEST DETAILS Test Method Clause Requirements Clause Reference IS 1585:009 TEXTILE WOVEN SUITINGS MADE OF COTTON, MANMADE FIBRES/FILAMENTS AND THEIR BLENDS Table 1 Levels of Control (Para 7 of the Scheme of Testing and Inspection) No. of Samples LEVELS OF CONTROL Lot Size Frequency Remarks (xvii) Maximum colour fastness ratings to a) Light b) Washing Test (i) Change in colour (ii) Staining of adjacent fabric c) Dry heat (Change in colour) d) Perspiration (i) Change in colour (ii) Staining of adjacent fabrics e) Rubbing (i) Dry (ii) Wet f) Hot Pressing (i) Change in colour (ii) Staining of adjacent IS 454 or IS 686 IS 3361 IS 4636 IS 971 IS 766 IS One Control Once in a year Once a week 3. Cloth 3. IS 1585 One Control Every control unit

7

क य म हर वभ ग 2 हम र स दभ: स एमड 2/16: वषय: आई एस क लए परण एव नरण क य जन, ड क: एसटआई/15852/2,अग(त 2016.

क य म हर वभ ग 2 हम र स दभ: स एमड 2/16: वषय: आई एस क लए परण एव नरण क य जन, ड क: एसटआई/15852/2,अग(त 2016. क य म हर वभ ग 2 हम र स दभ: स एमड 2/16: 15852 06 09 2016 वषय: आई एस 15852 क लए परण एव नरण क य जन, ड क: एसटआई/15852/2,अग(त 2016. सम धक र व र अन म #दत %ल'ड ड प +लए,टर स ब न वद/य1 क +लए कम ज क कपड़ (आई एस 15852:2009)

More information

SCHEME OF TESTING AND INSPECTION CERTIFICATION OF PHOSPHORIC ACID, FOOD GRADE ACCORDING TO IS 10508:1983

SCHEME OF TESTING AND INSPECTION CERTIFICATION OF PHOSPHORIC ACID, FOOD GRADE ACCORDING TO IS 10508:1983 SCHEME OF TESTING AND INSPECTION CERTIFICATION OF PHOSPHORIC ACID, FOOD GRADE ACCORDING TO IS 10508:1983 1. Laboratory - A laboratory shall be maintained which shall be suitably equipped and staffed to

More information

BUREAU OF INDIAN STANDARDS (CMD II)

BUREAU OF INDIAN STANDARDS (CMD II) BUREAU OF INDIAN STANDARDS (CMD II) Our Ref: CMD/16:15477 01 12 2006 Subject: STI for IS 15477:2004. Title: Adhesive for Use with Ceramic Tiles and Mosaics. The Scheme of Testing and Inspection for IS

More information

SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF SISAL ROPES PART 1 UNTARRED VARIEITES ACCORDING TO IS 1321(Part 1):2003 (Fourth Revision)

SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF SISAL ROPES PART 1 UNTARRED VARIEITES ACCORDING TO IS 1321(Part 1):2003 (Fourth Revision) SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF SISAL ROPES PART 1 UNTARRED VARIEITES ACCORDING TO IS 1321(Part 1):2003 (Fourth Revision) 1. LABORATORY- A laboratory shall be maintained, which shall

More information

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HAND-OPERATED CHAIN PULLEY BLOCKS ACCORDING TO IS 3832:2005 (Third Revision) (Incorporating Amendment No. 1) DOC:STI:3832/3 1. LABORATORY A laboratory

More information

BUREAU OF INDIAN STANDARDS (Central Marks Department - III) Our Ref : CMD-III/16: Oct 2006

BUREAU OF INDIAN STANDARDS (Central Marks Department - III) Our Ref : CMD-III/16: Oct 2006 BUREAU OF INDIAN STANDARDS (Central Marks Department - III) Our Ref : CMD-III/16:8156 18 Oct 2006 Subject : SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FASTENERS FOR CONSUMER GOODS SYNTHETIC

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TAPER ROLLER BEARINGS ACCORDING TO IS 12102:1987

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TAPER ROLLER BEARINGS ACCORDING TO IS 12102:1987 DOC:STI/12102/1 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TAPER ROLLER BEARINGS ACCORDING TO IS 12102:1987 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and

More information

CENTRAL MARKS DEPARTMENT II. Ref: CMD-II/16:

CENTRAL MARKS DEPARTMENT II. Ref: CMD-II/16: CENTRAL MARKS DEPARTMENT II Ref: CMD-II/16: 15939 06 09 2013 Subject : Implementation of Scheme of Testing & Inspection, Doc: STI/15939/1, for BIFENTHRIN WP as per IS 15939:2011. The Scheme of Testing

More information

1.1 All testing apparatus shall be periodically checked and calibrated. Records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated. Records of such checks/calibration shall be maintained. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PART 1 GENERAL REQUIREMENTS AND TESTS ACCORDING TO IS 2486(PT.1):1993 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICAATION OF VENEERED DECORATIVE PLYWOOD ACCORDING TO IS 1328:1996 (Third Revision)

SCHEME OF TESTING AND INSPECTION FOR CERTIFICAATION OF VENEERED DECORATIVE PLYWOOD ACCORDING TO IS 1328:1996 (Third Revision) SCHEME OF TESTING AND INSPECTION FOR CERTIFICAATION OF VENEERED DECORATIVE PLYWOOD ACCORDING TO IS 1328:1996 (Third Revision) DOC:STI/1328/4 1. LABORATORY -A laboratory shall be maintained which shall

More information

1.1 All testing apparatus shall be periodically checked and calibrated and records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated and records of such checks/calibration shall be maintained. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS ACCORDING TO IS 2046:1995 (First Revision) 1. LABORATORY: A laboratory shall be maintained

More information

1.1 All the testing apparatus shall be periodically checked and calibrated and records of such checks/calibration maintained.

1.1 All the testing apparatus shall be periodically checked and calibrated and records of such checks/calibration maintained. Doc:STI/5557/6, SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF INDUSTRIAL AND PROTECTIVE RUBBER KNEE AND ANKLE BOOTS ACCORDING TO IS 5557:2004 (FOURTH REVISION) 1.0 LABORATORY- A laboratory shall

More information

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF COUPLINGS, BRANCH PIPE, NOZZLES USED IN HOSE REEL TUBING FOR FIRE FIGHTING ACCORDING TO 1. LABORATORY A laboratory shall be maintained which shall

More information

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STEEL WIRE ROPES FOR HAULAGES PURPOSES ACCORDING TO IS 1856:2005 (Third Revision) (INCORPORATING AMENDMENT NO. 1) 1. LABORATORY A laboratory shall

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SELF BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES ACCORDING TO IS 15111(Part 1 & 2):2002

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SELF BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES ACCORDING TO IS 15111(Part 1 & 2):2002 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SELF BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES ACCORDING TO IS 15111(Part 1 & 2):2002 1 LABORATORY A laboratory shall be maintained which shall

More information

2.0 TEST RECORDS - All records of tests and inspection shall be kept in suitable forms approved by the Bureau.

2.0 TEST RECORDS - All records of tests and inspection shall be kept in suitable forms approved by the Bureau. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF POWER CAPACITORS OF SELF-HEALING TYPE FOR AC POWER SYSTEMS HAVING RATED VOLTAGE UP TO 650 V ACCORDING TO IS 13340:1993 1. LABORATORY A laboratory shall

More information

CENTRAL MARKS DEPARTMENT-II. Our Ref: CMD-II/16: Subject: Information of revised version of Alumino-Ferric as per IS 299.

CENTRAL MARKS DEPARTMENT-II. Our Ref: CMD-II/16: Subject: Information of revised version of Alumino-Ferric as per IS 299. CENTRAL MARKS DEPARTMENT-II Our Ref: CMD-II/16:299 28 01 2013 Subject: Information of revised version of Alumino-Ferric as per IS 299. Please find enclosed Finalized versions of the above specification

More information

Doc: STI/1223(Section-2)/5 Oct 2003

Doc: STI/1223(Section-2)/5 Oct 2003 SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF APPARATUS FOR DETERMINATION OF MILK FAT BY GERBER METHOD ACCORDING TO IS 1223:2001 (Third Revision) SECTION 2 - STOPPERS 1. LABORATORY- A laboratory

More information

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III Our Ref:CMD-III/16:12427 2003-05-27 Subject: Implementation of revised IS 12427:2001 Hexagon head transmission tower bolts and revised STI, Doc:STI/12427/2

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FLAVOURED MILK ACCORDING TO IS 4709: 1968

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FLAVOURED MILK ACCORDING TO IS 4709: 1968 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FLAVOURED MILK ACCORDING TO IS 4709: 1968 DOC:STI/4709/1 1.0 LABORATORY A laboratory shall be maintained which shall be suitably equipped and staffed,

More information

SPECIFICATION ACCORDING TO IS

SPECIFICATION ACCORDING TO IS SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF TEXTILES - HIGH DENSITY POLYETHYLENE (HDPE)/POLYPROPYLENE (PP) WOVEN SACKS FOR PACKAGING OF 50 kg FOODGRAINS SPECIFICATION ACCORDING TO IS 14887:2014

More information

2.0 TEST RECORDS- All records of tests and inspection shall be kept in suitable forms approved by the Bureau of Indian Standards.

2.0 TEST RECORDS- All records of tests and inspection shall be kept in suitable forms approved by the Bureau of Indian Standards. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF BITUMEN EMULSION FOR ROADS (CATIONIC TYPE) ACCORDING TO IS 8887:2004 (Second Revision) DOC:STI/8887/3 1.0 LABORATORY- A laboratory shall be maintained,

More information

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ACCORDING TO IS 15884: 2010 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and staffed where different tests given

More information

2.2 Copies of any records and other connected papers that may be required by the Bureau shall be made available at any time on request.

2.2 Copies of any records and other connected papers that may be required by the Bureau shall be made available at any time on request. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SHORT-PITCH TRANSMISSION PRECISION ROLLER AND BUSH CHAINS, ATTACHMENTS AND ASSICIATED CHAIN SPROCKETS ACCORDING TO IS 2403:2014 1.0 LABORATORY A laboratory

More information

2.1 All records of tests and inspection shall be kept in suitable forms approved by the Bureau.

2.1 All records of tests and inspection shall be kept in suitable forms approved by the Bureau. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CARBON STEEL CAST BILLET INGOTS, BILLETS, BLOOMS AND SLABS FOR RE-ROLLING INTO STEEL FOR GENERAL STRUCTURAL PURPOSES ACCORDING TO IS 2830:2012 1. LABORATORY

More information

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ACCORDING TO IS 11722:1986 (Including Amendment No. 1 to 5) 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and staffed

More information

1.1 All testing apparatus shall be periodically checked and calibrated and records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated and records of such checks/calibration shall be maintained. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SHUNT CAPACITORS FOR AC POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V GENERAL PERFORMANCE, TESTING AND RATING SAFETY REQUIREMENTS, GUIDE FOR INSTALLATION

More information

1.2 All the testing equipment shall be periodically checked and calibrated and records of such checks/ calibration maintained.

1.2 All the testing equipment shall be periodically checked and calibrated and records of such checks/ calibration maintained. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED MILD STEEL FIRE BUCKET ACCORDING TO IS 2546:1974 (First Revision) (Including Amendment No.1&2) 1. LABORATORY DOC:STI-2546/2 1.1 A laboratory

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SWITCHES FOR DOMESTIC & SIMILAR PURPOSE ACCORDING TO IS 3854:1997

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SWITCHES FOR DOMESTIC & SIMILAR PURPOSE ACCORDING TO IS 3854:1997 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SWITCHES FOR DOMESTIC & SIMILAR PURPOSE ACCORDING TO IS 3854:1997 Doc: STI/3854/9 1. LABORATORY A laboratory shall be maintained which shall be suitably

More information

DOC: STI/8783(Part 4/Sec1)/1 August 1998

DOC: STI/8783(Part 4/Sec1)/1 August 1998 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF Winding Wires for Submersible Motors Part 4 Specification for Individual Wires Sec 1 HR PVC Insulated Wires ACORDING TO IS: 8783(Part 4/Sec 1): 1995

More information

1.1 All testing apparatus shall be periodically checked and calibrated and records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated and records of such checks/calibration shall be maintained. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PRESSURE SENSTIVE ADHESIVE INSULATING TAPES FOR ELECTRICAL PURPOSES (PLASTICIZED POLYVINYL CHLORIDE TAPES WITH NON-THERMOSETTING ADHESIVE) ACCORDING

More information

BUREAU OF INDIAN STANDARDS CMD-II

BUREAU OF INDIAN STANDARDS CMD-II BUREAU OF INDIAN STANDARDS CMD-II Doc: STI/14542/1 Our Ref: CMD/16:14542 17 07 07 Subject: STI for IS 14542:1998 Title: Partly skim Milk Powder The Scheme of Testing and Inspection for 14542:1998 for Partly

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED STEEL BARBED WIRE FOR FENCING ACCORDING ACCORDING TO IS 278:2009 (Fourth Revision)

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED STEEL BARBED WIRE FOR FENCING ACCORDING ACCORDING TO IS 278:2009 (Fourth Revision) SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED STEEL BARBED WIRE FOR FENCING ACCORDING ACCORDING TO (Fourth Revision) DOC: STI/278/, 1 LABORATORY - A laboratory shall be maintained which

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSES ACCORDING TO IS 2266:2002 (Fourth Revision)

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSES ACCORDING TO IS 2266:2002 (Fourth Revision) SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSES ACCORDING TO IS 2266:2002 (Fourth Revision) Doc:STI/2266/5 1. LABORATORY: A laboratory shall be maintained,

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RESPIRATORY PROTECTIVE DEVICES FULL FACE MASKS ACCORDING TO IS 14166:1994

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RESPIRATORY PROTECTIVE DEVICES FULL FACE MASKS ACCORDING TO IS 14166:1994 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RESPIRATORY PROTECTIVE DEVICES FULL FACE MASKS ACCORDING TO IS 14166:1994 1.0 Laboratory A laboratory shall be maintained, which shall be suitably

More information

DOC:STI/9573/2 January 2003

DOC:STI/9573/2 January 2003 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RUBBER HOSE FOR LIQUIFIED PETROLEUM GAS (LPG) ACCORIDING TO IS 9573:1998 (Second Revision) (Incorporating Amendment No.1 to 3) 1. LABORATORY: A laboratory

More information

1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained. PHOTOGRAPHY MEDICAL RADIOGRAPHIC CASSETTES/SCREENS/FILMS AND HARD-COPY IMAGING FILMS 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SILVERED GLASS MIRRORS FOR GENERAL PURPOSES ACCORDING TO IS :

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SILVERED GLASS MIRRORS FOR GENERAL PURPOSES ACCORDING TO IS : Doc. STI 3438/4 December 1995 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SILVERED GLASS MIRRORS FOR GENERAL PURPOSES ACCORDING TO IS : 3438-1994 1. Laboratory A laboratory shall be maintained,

More information

STI /15392 /1 April, 2009

STI /15392 /1 April, 2009 CENTRAL MARKS DEPARTMENT-III Our Ref : CMD-III/16:15392 30 04 2009 Subject : Finalized STI as per IS 15392 : 2003 Aluminium and Aluminium Alloy Bare Foil Food Packaging The Scheme of Testing and Inspection

More information

1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PLYWOOD FOR GENERAL PURPOSES ACCORDING TO IS : 303-1989 (third revision) (Incorporating Amendment No. 1 to 4 ) 1. LABORATORY A laboratory shall be

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF COPPER SULPHATE ACCORDING TO IS :

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF COPPER SULPHATE ACCORDING TO IS : Doc. STI 261/2 February 1984 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF COPPER SULPHATE ACCORDING TO IS : 261-1982 1 Laboratory A laboratory shall be maintained, which shall be suitably equipped

More information

CENTRAL MARKS DEPARTMENT-III. Our Ref.:CMD-III/16:

CENTRAL MARKS DEPARTMENT-III. Our Ref.:CMD-III/16: CENTRAL MARKS DEPARTMENT-III Our Ref.:CMD-III/16:13382 29.12.2004 Subject : Implementation of revised IS 13382:2004 Cast Iron Specials for Mechanical and pushon flexible joints for pressure pipe lines

More information

1.1 All the testing apparatus shall be periodically checked and calibrated and records of such checks/calibration maintained.

1.1 All the testing apparatus shall be periodically checked and calibrated and records of such checks/calibration maintained. SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF LEATHER SAFETY FOOTWEAR WITH DIRECT MOULDED POLYVINYL CHLORIDE (PVC) SOLE ACCORDING TO IS 14544:1998 DOC:STI/14544/1 1.0 LABORATORY- A laboratory shall

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALLIABLE CAST IRON PIPE FITTINGS ACCORDING TO IS: 1879:2010 (Third Revision)

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALLIABLE CAST IRON PIPE FITTINGS ACCORDING TO IS: 1879:2010 (Third Revision) SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALLIABLE CAST IRON PIPE FITTINGS ACCORDING TO IS: 1879:2010 (Third Revision) 1. LABORATORY: A laboratory shall be maintained which shall be suitably

More information

DOC:STI/3087/4 September 2006

DOC:STI/3087/4 September 2006 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PARTICLE BOARDS OF WOOD AND OTHER LIGNOCELLULOSIC MATERIALS (MEDIUM DENSITY) FOR GENERAL PURPOSES ACCORDING TO IS 3087:2005 (Second Revision) DOC:STI/3087/4

More information

1.1 All the testing apparatus shall be checked periodically and records of such checks shall be maintained.

1.1 All the testing apparatus shall be checked periodically and records of such checks shall be maintained. DOC: STI/398(Pt. 5)/2 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALUMINIUM CONDUCTORS GALVANIZED STEEL REINFORCED FOR EXTRA HIGH VOLTAGE (400 KV and ABOVE) ACCORDING TO IS 398(Pt. 5):1992 1.

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TITANIUM DIOXIDE, ANATASE, FOR PAINTS ACCORDING TO IS :

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TITANIUM DIOXIDE, ANATASE, FOR PAINTS ACCORDING TO IS : SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TITANIUM DIOXIDE, ANATASE, FOR PAINTS ACCORDING TO IS : 411-1991 Doc. STI 411/3. November 1994 1 Laboratory A laboratory shall be maintained, which

More information

CENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:

CENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16: CENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:15489 20 03 2014 Subject: Implementation of revised STI for IS 15489 :2013 for Paint Plastic Emulsion - Specification 1. Indian Standard Specification for

More information

1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CROSSLINKED POLYETHYLENE INSULATED THERMOPLASTIC SHEATHED CABLES FOR WORKING VOLTAGES UPTO AND INCLUDING 1100 VOLTS ACCORDING TO IS 7098(Part 1):1988

More information

Doc: STI/1166/6 July 2008

Doc: STI/1166/6 July 2008 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONDENSED MILK, PARTLY SKIMMED AND SKIMMED CONDENSED MILK ACCORDING TO IS 1166:1986 (Incorporating Amendment No. 1, 2 & 3) 1. Laboratory - A laboratory

More information

BUREAU OF INDIAN STANDARDS (Central Marks Department III) Our ref: CMD-III/16: November 2007

BUREAU OF INDIAN STANDARDS (Central Marks Department III) Our ref: CMD-III/16: November 2007 BUREAU OF INDIAN STANDARDS (Central Marks Department III) Our ref: CMD-III/16: 15658 26 November 2007 Subject: SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PRECAST CONCRETE BLOCKS FOR PAVING AS

More information

2. 0 Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.

2. 0 Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF IRRIGATION EQUIPMENT-EMITTING PIPE SYSTEMS ACCORDING TO IS 13488:2008 (First revision) 1.0 Laboratory - A laboratory shall be maintained which shall

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SWITCH-SOCKET-OUTLETS (NON-INTERLOCK TYPE) ACCORDING TO IS 15787:2008

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SWITCH-SOCKET-OUTLETS (NON-INTERLOCK TYPE) ACCORDING TO IS 15787:2008 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SWITCH-SOCKET-OUTLETS (NON-INTERLOCK TYPE) ACCORDING TO IS 15787:2008 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped

More information

2. Test Records - All records of tests and analysis shall be kept in suitable forms approved by the Bureau.

2. Test Records - All records of tests and analysis shall be kept in suitable forms approved by the Bureau. . Doc: STI/2041/ 2 SCHEME OF TESTING AND INPECTION FOR CERTIFICATION OF STEEL PLATES FOR PRESSURE VESSELS USED AT MODERATE AND LOW TEMPERATURE ACCORDING TO IS 2041:2009 (Third Revision) 1. Laboratory A

More information

CENTRAL MARKS DEPARTMENT-II

CENTRAL MARKS DEPARTMENT-II CENTRAL MARKS DEPARTMENT-II Our Ref.: CMD-II/16:15298 (Pt 2) ` 24 05 2012 Subject: Implementation of revised specification for IS 15298 (Pt 2):2011/ISO 20345:2004 Safety Protective and Occupational Footwear

More information

1.1 All testing apparatus shall be periodically checked and calibrated. Records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated. Records of such checks/calibration shall be maintained. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SINGLE PHASE a.c. INDUCTION MOTORS FOR GENERAL PURPOSE ACCORDING TO IS 996:2009 (Including Amendment No.1) 1. LABORATORY A laboratory shall be maintained

More information

1.1 All the testing apparatus shall be periodically checked and calibrated and records of such checks/calibration maintained.

1.1 All the testing apparatus shall be periodically checked and calibrated and records of such checks/calibration maintained. November2004 SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF ENAMEL, SYNTHETIC, EXTERIOR a)under Coating b) Finishing ACCORDING TO IS 2932:2003 (Third Revision) 1. LABORATORY- A laboratory shall be

More information

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III Our Ref: CMD-III/16:814 31 January 2006 Subject: Implementation of Amendment No 1 to IS 814:2004 for Covered Electrodes For Manual Metal Arc Welding

More information

2.2 Copies of any records and other connected papers that may be required by the Bureau shall be made available at any time on request.

2.2 Copies of any records and other connected papers that may be required by the Bureau shall be made available at any time on request. DOC:STI/694/8 July 2004 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PVC INSULATED CABLES (FOR VOLTAGES UPTO AND INCLUDING 1100 VOLTS) ACCORDING TO IS:694:1990 (Including amendment No.1 &2) 1.

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PLASTIC FEEDING BOTTLES ACCORDING TO IS : 1999 (Incorporating Amendment No.

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PLASTIC FEEDING BOTTLES ACCORDING TO IS : 1999 (Incorporating Amendment No. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PLASTIC FEEDING BOTTLES ACCORDING TO IS 14625 : 1999 (Incorporating Amendment No. 1,2 3 & 4).Doc: STI/14625/3 1.0 LABORATORY- A laboratory shall be

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GRAIN ORIENTED ELECTRICAL STEEL SHEET AND STRIP ACCORDING TO IS 3024:2006 (Second Revision)

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GRAIN ORIENTED ELECTRICAL STEEL SHEET AND STRIP ACCORDING TO IS 3024:2006 (Second Revision) SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GRAIN ORIENTED ELECTRICAL STEEL SHEET AND STRIP ACCORDING TO IS 3024:2006 (Second Revision) 1. Laboratory A laboratory shall be maintained which shall

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALLUMINIUM ALLOY TUBES FOR IRRIGATION PURPOSES; WELDED TUBES ACCORDING TO IS: 7092 (PART I)-1992

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALLUMINIUM ALLOY TUBES FOR IRRIGATION PURPOSES; WELDED TUBES ACCORDING TO IS: 7092 (PART I)-1992 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALLUMINIUM ALLOY TUBES FOR IRRIGATION PURPOSES; WELDED TUBES ACCORDING TO IS: 7092 (PART I)-1992 1. LABORATORY: A laboratory shall be maintained which

More information

BUREAU OF INDIAN STANDARDS (Central Marks Department-III) Our Ref : CMD-III/16: October 2008

BUREAU OF INDIAN STANDARDS (Central Marks Department-III) Our Ref : CMD-III/16: October 2008 BUREAU OF INDIAN STANDARDS (Central Marks Department-III) Our Ref : CMD-III/16:14587 15 October 2008 Subject : REVISED SCHEME OF TESTING AND INSPECTION FOR PRELAMINATED MEDIUM FIBRE DENSITY BOARDS AS PER

More information

CENTRAL MARKS DEPARTMENT-III

CENTRAL MARKS DEPARTMENT-III CENTRAL MARKS DEPARTMENT-III Our Ref: CMD-III/16:814 21.12.2004 Subject: Implementation of revised IS 814:2004 Covered electrodes for manual metal arc welding of carbon and carbon manganese steel and revised

More information

1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained. DOC: STI//1 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ACCORDING TO IS/IEC:2003 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF BORAX ACCORDING TO IS 1109:1980

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF BORAX ACCORDING TO IS 1109:1980 1 LABORATORY SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF BORAX ACCORDING TO IS 1109:1980 A laboratory shall be maintained which shall be suitably equipped and staffed where different tests shall

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SLUICE VALVE FOR WATER WORKS PURPOSES (50 TO 1200 MM SIZE) ACCORDING TO IS 14846:2000

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SLUICE VALVE FOR WATER WORKS PURPOSES (50 TO 1200 MM SIZE) ACCORDING TO IS 14846:2000 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SLUICE VALVE FOR WATER WORKS PURPOSES (50 TO 1200 MM SIZE) ACCORDING TO IS 14846:2000 1.0 LABORATORY: A laboratory shall be maintained which shall

More information

CENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:2933 (Part 1)

CENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:2933 (Part 1) CENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:2933 (Part 1) 20 03 2014 Subject: Implementation of revised STI for IS 2933 (Part for ENAMEL, EXTERIOR: (a) UNDERCOATING (b) FINISHING SPECIFICATION PART 1

More information

1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained. DOC: STI//1 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF According to IS/IEC:2000 (Including Amendment no.2) 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HAND OPERATED STIRRUP-TYPE SPRAYER ACCORDING TO IS 1971:1996 (Fifth Revision)

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HAND OPERATED STIRRUP-TYPE SPRAYER ACCORDING TO IS 1971:1996 (Fifth Revision) SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HAND OPERATED STIRRUP-TYPE SPRAYER ACCORDING TO (Fifth Revision) 1.0 LABORATORY- A laboratory shall be maintained, which shall be suitably equipped

More information

2. Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.

2. Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards. Doc. STI 1848/6 January 1995 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF WRITING AND PRINTING PAPERS ACCORDING TO IS : 1848-1991 (Third Revision) (Amendment No.1 OF September 1993) 1. Laboratory

More information

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III Our Ref: CMD-III/16:2556 13 April 2005 Subject: Implementation revised STI Doc: STI/2556/6,, pertaining to IS 2556 (Part-1 to 17 excluding withdrawn

More information

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT III

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT III BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT III Our Ref : CMD-III/16: 9857 11 April, 2007 Subject : Implementation of Amendment No.1, January2007 to IS 9857:1990 - welding cables- Specification

More information

2. Test Record - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.

2. Test Record - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards. Doc: STI/1166/6 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONDENSED MILK, PARTLY SKIMMED AND SKIMMED CONDENSED MILK ACCORDING TO IS 1166:1986 (Incorporating Amendment No. 1, 2 & 3) 1. Laboratory

More information

BUREAU OF INDIAN STANDARDS (CENTRAL MARKS DEPARTMENT-III)

BUREAU OF INDIAN STANDARDS (CENTRAL MARKS DEPARTMENT-III) BUREAU OF INDIAN STANDARDS (CENTRAL MARKS DEPARTMENT-III) Ref: CMD-III/16:710 15 March 2011 Subject: Implementation of revised standard IS 710:2010, for Marine Plywood and revised STI Doc: STI/710/5,.

More information

BUREAU OF INDIAN STANDARDS ( CENTRAL MARKS DEPARTMENT-III ) Our Ref: CMD-III/16:

BUREAU OF INDIAN STANDARDS ( CENTRAL MARKS DEPARTMENT-III ) Our Ref: CMD-III/16: BUREAU OF INDIAN STANDARDS ( CENTRAL MARKS DEPARTMENT-III ) Our Ref: CMD-III/16:4985 30-07-2007 Subject: Implementation of Amendment No 2, April 2007 to IS 4985: 2000 Unplasticized PVC Pipes for potable

More information

2. Test Record - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.

2. Test Record - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SALT AND REFINED IODIZED SALT, VACUUM EVAPORATED IODIZED ACCORDING TO IS 7224:2006 (Second Revision) Doc: STI/7224/5 1. Laboratory - A laboratory shall

More information

CENTRAL MARKS DEPARTMENT III. Our Ref : CMD-III/16: Mar 2007

CENTRAL MARKS DEPARTMENT III. Our Ref : CMD-III/16: Mar 2007 CENTRAL MARKS DEPARTMENT III Our Ref : CMD-III/16:418 13 Mar 2007 Subject : IMPLEMENTATION OF REVISED INDIAN STANDARD UNDER CERTIFICATION IS 418:2004 FOR TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR

More information

CENTRAL MARKS DEPARTMENT-II

CENTRAL MARKS DEPARTMENT-II CENTRAL MARKS DEPARTMENT-II Our Ref.:CMD-II/16:1664 18 Nov 2013 Subject: Implementation of revised Scheme of Testing and Inspection (STI) Doc: STI/1664/8, for Mineral Mixture for Supplementing Cattle Feeds

More information

CENTRAL MARKS DEPARTMENT-2

CENTRAL MARKS DEPARTMENT-2 क य म हर वभ ग 2 हम र स दभ: स एमड 2/16: 7903 26 07 2016 वषय: आई एस 7903:2011 द- उ$च घन(व प लइथलन ब न कपड़ स बन 0तरप ल. 3 4प एसटआई स 7य /7903/4, ज ल ई 2016 अ>ययन क?लए स ल@न ह तदन स र सभ श ख ओ स अन र ध ह Hक

More information

GUIDELINES FOR IMPLEMENTATION OF IS 13334(PART 1):2014

GUIDELINES FOR IMPLEMENTATION OF IS 13334(PART 1):2014 GUIDELINES FOR IMPLEMENTATION OF IS 13334(PART 1):2014 In order to implement the revised Scheme of Testing and Inspection for Skimmed Milk Powder, Standard Grade as per IS 13334 (Pt 1):2014., following

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TOOTH PASTE ACCORDING TO IS 6356: 2001 (Third Revision)

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TOOTH PASTE ACCORDING TO IS 6356: 2001 (Third Revision) SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TOOTH PASTE ACCORDING TO IS 6356: 2001 (Third Revision) Doc:STI/6356/4 1. LABORATORY- A laboratory shall be maintained, which shall be suitably equipped

More information

2. TEST RECORDS: All records of tests and analysis shall be kept in suitable forms approved by the Bureau.

2. TEST RECORDS: All records of tests and analysis shall be kept in suitable forms approved by the Bureau. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CARBON STEEL BILLETS, BLOOMS, SLABS AND BARS FOR FORGINGS ACCORDING TO IS:1875-1992 (Fifth Revision) 1. LABORATORY: A laboratory shall be maintained

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF 53 GRADE ORDINARY PORTLAND CEMENT ACCORDING TO IS:

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF 53 GRADE ORDINARY PORTLAND CEMENT ACCORDING TO IS: SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF 53 GRADE ORDINARY PORTLAND CEMENT ACCORDING TO IS: 12269-1987 1. A laboratory shall be maintained, which shall be suitably equipped and staffed, where

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SHAVING CREAMS ACCORDING TO IS ( Incorporating Amendment No.

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SHAVING CREAMS ACCORDING TO IS ( Incorporating Amendment No. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SHAVING CREAMS ACCORDING TO IS 9740-1981 ( Incorporating Amendment No. 1,2,3,4 & 5) Doc: STI/9740/1 1.0 LABORATORY- A laboratory shall be maintained,

More information

CMD-II(Legal) CMD-II/16:

CMD-II(Legal) CMD-II/16: CMD-II(Legal) CMD-II/16:15965 11-5-2015 Subject: SCHEME OF TESTING AND INSPECTION FOR PRE-PAINTED ALUMINIUM ZINC ALLOY METALLIC COATED STEEL STRIP AND SHEET ( PLAIN ) ACCORDING TO IS 15965 :2012 MUBO (MCM)

More information

CENTRAL MARKS DEPARTMENT II. Subject: Implementation of revised Indian Standard Specification for Nitric Acid

CENTRAL MARKS DEPARTMENT II. Subject: Implementation of revised Indian Standard Specification for Nitric Acid CENTRAL MARKS DEPARTMENT II Our Ref: CMD-II/16:264 22 03 2006 Subject: Implementation of revised Indian Standard Specification for Nitric Acid Indian Standard specification for Nitric Acid as per IS 264:1976

More information

CENTRAL MARKS DEPARTMENT-3. Our Ref: CMD-3/16: Subject: STI as per IS 13714: 1993 DUNNAGE PALLETS-WAREHOUSING

CENTRAL MARKS DEPARTMENT-3. Our Ref: CMD-3/16: Subject: STI as per IS 13714: 1993 DUNNAGE PALLETS-WAREHOUSING क द र ह व भ ग 3 द भ- क द र ह व भ ग -3/ 16: आई ए 13714 06.09. 2016 ग ह- आई ए 13714 : 1993 क ल ए ए ट आई आई ए 13714 : 1993 ल भ र (ड ज) प ट भ ड र ग़ क ल ए पर षण और ल ररषण य ज क य वय क ल ए ष ल य क य य एश ष ख

More information

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES PNEUMATIC TYRES FOR COMMERCIAL VECHICLES DIAGONAL AND RADIAL PLY ACCORDING TO IS 15636:2005 1. LABORATORY A laboratory shall be

More information

(अन भ ग अध क र ) (स ए ड -3)

(अन भ ग अध क र ) (स ए ड -3) क द र ह व भ ग 3 स द भ- क द र ह व भ ग -3/16: आई एस 15511 17 भ 2016 ग षह- आई एस 15511:2004 स ईककल ज ज भ एस.ट.आई क क ह भद ह सषम अध क र व र स लगन एस.ट.आई क अन म दन कर ददय गय ह यह सभ क रय ग ह त ह आई एस 15511:2004

More information

CENTRAL MARKS DEPARTMENT-2. Ref: CMD-2/16:

CENTRAL MARKS DEPARTMENT-2. Ref: CMD-2/16: CENTRAL MARKS DEPARTMENT-2 Ref: CMD-2/16:15694 05 09 2016 Subject: Implementation of STI (Doc: STI/15694/1, ) for IS 15694:2006 Potassium Iodate, Food Grade Please find enclosed STI for IS 15694:2006 Potassium

More information

क न द र य म ह व भ ग भ स द भ- स ए ड -III/16: IS

क न द र य म ह व भ ग भ स द भ- स ए ड -III/16: IS क न द र य म ह व भ ग - III भ स द भ- स ए ड -III/16: IS 4984 03 07 2017 ग षय म ह- पवनभ क ष त आई एस 4984 : 2016 क परभप लन ललए एस ट आई Doc: STI/4984/7, इस उपर क त व षय क स दर भ ह सक षम प र ध क र न IS 4984 :

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALT EXTRACT ACCORDING TO IS 2404 : 1993

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALT EXTRACT ACCORDING TO IS 2404 : 1993 DOC:STI/2404/4 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALT EXTRACT ACCORDING TO IS 2404 : 1993 1. LABORATORY -A laboratory shall be maintained which shall be suitable equipped and staffed,

More information

MARKS DEPARTMENT-III. ROs/BOs may also propose the implementation date in view of revision of Indian

MARKS DEPARTMENT-III. ROs/BOs may also propose the implementation date in view of revision of Indian " /' CENTRAL MARKS DEPARTMENT-III Our Ref: CMD-IiI/16:2830 20062012 IndianStandardIS 2830 : 1992 has been revised and publishedas IS 2830 :. 2012 Carbon Steel Cast Billet Ingots (Pencil Ingots), Billets,

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ORDINARY PORTLAND CEMENT, 33 GRADE ACCORDING TO

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ORDINARY PORTLAND CEMENT, 33 GRADE ACCORDING TO 1 Doc: STI/269/6 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ORDINARY PORTLAND CEMENT, 33 GRADE ACCORDING TO IS 269:2013 (Fifth Revision) 1.0 LABORATORY: A laboratory shall be maintained, which

More information

क द य म हर व भ ग-2 CENTRAL MARKS DEPARTMENT -2

क द य म हर व भ ग-2 CENTRAL MARKS DEPARTMENT -2 क द य म हर व भ ग-2 स दभभ : स एमड -2 /16:16190 27.07.2017 व षय: आई एस 16190:2014 क वष स र दद सस च ई क स ए उच च घनत प इथ ई न (एच. ड.प.ई.) समन ट ड ब न फ ट ट य ब क तत स ब ध त एस ट आई (ड क: एस ट आई /16190/1

More information

(ड चद र ) ञ न क ई (स ए ड -3)

(ड चद र ) ञ न क ई (स ए ड -3) क द र ह व भ ग 3 स द भ- क द र ह व भ ग -3/ 16: आई एस 14561 14 द स बर 2015 ग षह- स श ध त आई एस 14561 क एस.ट.आई क क ह भद ह त यह स च त क य ज त ह क आई एस 14561 क एस.ट.आई स श च त ज ह और सषम र च र आ श न स र इस

More information

स ल न प ए, (द सर स श धन) (स श धन 1 स 6 श "मल)

स ल न प ए, (द सर स श धन) (स श धन 1 स 6 श मल) क य म हर वभ ग 2 हम र स दभ: स एमड 2/16:7123 16 12 2015 वषय : परण और नरण क# य जन, एसटआई Doc:STI/7123/4 *दस बर 2015 क श त ल क 0लए आई एस 7123:1993 क 2प म3 क पय स लन प ए, परण और नरण क# य जन, एसटआई Doc:STI/7123/4

More information

CENTRAL MARKS DEPARTMENT-2. Our Ref: CMD-2/16: Sub: STI, Doc: STI/14252/1 October 2016, for the product as per IS 14252:2015

CENTRAL MARKS DEPARTMENT-2. Our Ref: CMD-2/16: Sub: STI, Doc: STI/14252/1 October 2016, for the product as per IS 14252:2015 क य म हर वभ ग-2 हम र स दभ: स एमड 2/16: 14252 25 10 2016 वषय: आई एस 14252 क लए परण एव नरण क य जन, ड क: एसटआई/14252)/1 अ(त बर 2016. सम -.धक र 0व र अन म 2दत व45 2द उ8च घन;व प लथ न (एचड प ई)/ प ल- पलन (प प

More information

Subject: Implementation of IS 9798:2013 Low Pressure Regulators for use with Liquefied Petroleum Gas (LPG) Specification (Second Revision).

Subject: Implementation of IS 9798:2013 Low Pressure Regulators for use with Liquefied Petroleum Gas (LPG) Specification (Second Revision). CENTRAL MARKS DEPARTMENT-II (Legal) Our Ref: CMD-II/16:9798 14 Subject: Implementation of IS 9798:2013 Low Pressure Regulators for use with Liquefied Petroleum Gas (LPG) Specification (Second Revision).

More information