Challenge. The SEICA Flying Probe Pilot V8 Was a new frontier for Board Handling. The Vertical Testing of PCB

Transcription

1

2 Challenge The SEICA Flying Probe Pilot V8 Was a new frontier for Board Handling. The Vertical Testing of PCB

3 Opportunity Seica Automation develop two different types of solution: Horizontal Magazine Handling SA-V8-HM-xxxx and Vertical Magazine Handling SA-V8-VM-xxxx Both solutions can be used for pass through or same side loading/unloading (Left or Right). The Seica Automation solutions are retrofittable, but will NOT be possible to change from HM to VM and viceversa.

4 Universal Frame The PCB may have different geometries such to make it difficult to introduce them in the system fixture To overcome this problem, Seica provides a universal frame this frame can be used on all of the Rapid Line Systems. Rapid280 Rapid270 Rapid260 Rapid220 Rapid230 Rapid250 Horizontal Vertical Vertical Vertical Horizontal Horizontal yes/manual yes/manual yes yes yes yes/manual

5 Both solutions uses standard Magazine/rack but the handling is based on two complete different way to work. V8-VM-xxx Means Vertical Magazine and use the Standard method of working, PCB come out Flat. V8-HM-xxx Means Horizontal Magazine and is used tilted of 90 degrees. The UUT come IN and OUT Degrees ready to be tested.

6 Rack - Magazine Information: Rack Magazine information is mandatory for both solutions. Minimum Maximum PCB dimension, will be exactly the same of selected Magazine Data Sheet. Bigger PCB can be tested only using MANUAL MODE by Pilot V8 Front Door. Is not possible to use 2 different size rack on same SEICA AUTOMATION module.

7 The PCB come in and out directly at 90 Degrees. Ready Position for feeding and testing The V8-HM-xxx Series include: Loaders and unloaders left or right, single or multi magazine

8 With SA-V8-HM-xxxx the magazine is operating on horizontal plane (same level). The rack load from right side and unload from left side. The magazine is moved always on horizontal position. NO POSSIBLE to use with standard Board Handling

9 Vertical Magazine SA-V8-VM-xxx series Are based on vertical (Normal) use of racks. The PCB starts horizontal and the Seica Automation unit provide to tilt t he PCB at 90 degrees ready for test. Board Handling Type SA-V8-VM-xxx is fully compatible with standard board Handling SMEMA. Easy Good Bad PCB separation, pass through and more

10 SA-V8-VM-T SA-V8-VM-TL SA-V8-VM-TT SA-V8-VM-TX SA-V8-VM-TSH Tilt From Horizontal to Vertical Infeed-Outfeed No Additional Module Tilt From Horizontal to Vertical Infeed-Outfeed Additional L type Curve Tilt From Horizontal to Vertical Infeed-Outfeed Additional T type Curve Tilt From Horizontal to Vertical Infeed-Outfeed Additional X type Curve From Horizontal to Vertical Infeed-Outfeed Additional Shuttle 2 Position Board Handling based on SA-V8-VM-xxx include all mode manipulating PCB No turn T turn L turn Additional shuttle can be integrated on every SA-V8-VN-xxx system.

11

12 V8-HM and V8-VM series are fully compatible with MRM software. MRM Multi Rack Manager WHY USE SA-V8-O-MRMK Option? Using the FP with Multi Rack Manager is possible to use the tester without operator assistance. During the night shift is customer can test up to 12 racks with 12 different type of PCB. Customer can run long test in the night.

13 SA-V8-O-MRMK Easy and Efficient MRM Multi Rack Manager Reduce ROI Operator Free Test Environment More Time for Debug Reducing time changeover More time for rework

14 Production Barcode & 2D Code Automation AOI ALI (LASER)

15 Pilot 4D V8 Pass Trought Night shift OBP USR (Israel) ICT + Functional ( thanks to 8 probes! )

16 Pilot 4D V8 AUTO: other installations (Austria)

17 Pilot 4D V8 AUTO: other installations (Ireland) (China) Pilot 4D V8 Auto Pilot 4D V8 Auto All Pilot 4D V8 AUTO will be PassTrought

18 Pilot 4D V8 PT in LINE Production LINE Production LINE 2 alternative Flow direction Production LINE Flow direction

19 Pilot 4D V8 PT in LINE

20 Pilot 4D V8 PT in LINE AUTOMATION means: Stability of the TEST: reduce false fails Automatic Program Selection (based on a barcode on the Rack) - APC_Manager.EXE & Diversities management - Reliable FIDUCIAL recognition - Simple Operator Interface (MYVIEW) Local language - Concept of a machine working alone (buzzer) - Customer Support structured - Knowledge on the Automation Modules - Diversities management

21 Seica Automation, located in Seregno (Italy), is part of the SEICA Group, and was founded to provide handling systems for electronics manufacturing able to satisfy every customer requirement. The Company can supply every kind of automation system for complete production lines, from the simplest to the most complex. All of our products are manufactured in Italy, under the control of SEICA AUTOMATION R&D and Quality Departments, in full compliance with industry standards. Seica Automation s.r.l. Via Arturo Toscanini, 50/ Seregno (MB)- Italy Tel Mail: