TECHNICAL MANUAL FOR. This copy is a reprint which includes current pages from Change 1.

Size: px
Start display at page:

Download "TECHNICAL MANUAL FOR. This copy is a reprint which includes current pages from Change 1."

Transcription

1 TM P TECHNICAL MANUAL ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) FOR CENTER, COMMUNICATIONS PATCHING (NSN ) AN/TSC-76 This copy is a reprint which includes current pages from Change 1. HEADQUARTERS, DEPARTMENT OF THE ARMY THIS PUBLICATION IS A COURTESY QUICK COPY JULY 1976 FROM THE UNITED STATES ARMY PUBLICATIONS DISTRIBUTION CENTER, ST. LOUIS, MISSOURI, TO MEET YOUR NEEDS WHILE WE REPLENISH OUR REGULAR STOCK.

2

3 *TM P TECHNICAL MANUAL HEADQUARTERS DEPARTMENT OF THE ARMY No P WASHINGTON, DC, 20 July 1976 ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) FOR CENTER, COMMUNICATIONS PATCHING AN/TSC-76 (NSN ) Current as of 26 March 1976 REPORTING OF ERRORS You can improve this manual by recommending improvements using DA Form located in the back of the manual. Simply tear out the self addressed form, fill it out as shown on the sample, fold it where shown, and drop it in the mail. If there are no blank DA Form in the back of your manual, use the standard DA Form 2028 (Recommended Changes to Publication and Blank Forms) and forward to the Commander, US Army Communications and Electronics Materiel Readiness Command, ATTN: DRSEL-MA-Q, Fort Monmouth, NJ In either case a reply will be furnished direct to you. SECTION I. II. GROUP Page Figure SECTION III. IV. 6 2, 3, 4 14 *This manual supersedes so much of TM , 30 October 1970 as pertains to repair parts and special tools list. Change 1 i

4

5 SECTION I INTRODUCTION TM P 1. Scope This manual lists repair parts and special tools required for performance of organizational, direct support, and general support maintenance of the AN/TSC General This Repair Parts and Special Tools List is divided into the following sections: a. Section II. Repair Parts List. A list of repair parts authorized for use in the performance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts. Parts lists are composed of functional groups in ascending numerical sequence, with the parts in each group listed in figure and item number sequence. b. Section III. Special Tools List. Not applicable. c. Section IV. National Stock Number and Part Number Index. A list, in ascending National item identification number (NIIN, last 9 digits) sequence, of all National stock numbers appearing in the listings, followed by a list in alphameric sequence, of all part numbers appearing in the listings. National stock number and part numbers are cross-referenced to each illustration figure and item number appearance. 3. Explanation of Columns The following provides an explanation of columns found in the tabular listings: a. Illustration. This column is divided as follows: (1) Figure number. Indicates the figure number of the illustration in which the item is shown. (2) Item number. The number used to identify each item called out in the illustration. b. Source, Maintenance and Recoverability Codes (SMR). (1) Source code. Source codes are assigned to support items to indicate the manner of acquiring support items for maintenance, repair, or overhaul of end items. Source codes are entered in the first and second positions of the Uniform SMR Code format as follows: Code Definition PA - Item procured and stocked for anticipated or known usage. PD - Support item, excluding support equipment procured for initial issue or outfitting and stocked only for subsequent or additional initial issues or outfittings. Not subject to automatic replenishment. Code Definition XD A support item that is not stocked. When required, item will be procured through normal supply channels. NOTE Cannibalization or salvage may be used as a source of supply for any items source coded above except those coded XA, XD, and aircraft support items as restricted by AR (2) Maintenance code. Maintenance codes are assigned to indicate the levels of maintenance authorized to USE and REPAIR support items. The maintenance codes are entered in the third and fourth positions of the Uniform SMR Code format as follows: (a) The maintenance code entered in the third position will indicate the lowest maintenance level authorized to remove, replace, and use the support item. The maintenance code entered in the third position will indicate one of the following levels of maintenance: Code Application/Explanation O Support item is removed, replaced, used at the organizational level. H Support item is removed, replaced, used at the general support level. D Support items that are removed, replaced, used at depot, mobile depot, specialized repair activity only. (b) The maintenance code entered in the fourth position indicates whether the item is to be repaired and identifies the lowest maintenance level with the capability to perform complete repair (i.e., all authorized maintenance functions). This position will contain one of the following maintenance codes: Code Application/Explanation H D The lowest maintenance level capable of complete repair of the support item is the general support level. The lowest maintenance level capable of complete repair of the support item is the depot level. Z Nonreparable. No repair is authorized. (3) Recoverability code. Recoverability codes are assigned to support items to indicate the disposition action on unserviceable items. The recoverability code is entered in the fifth position of the Uniform SMR Code format as follows: Recoverability codes Z Definition Nonreparable item. When condemn and dispose at unserviceable, the level indi- Change 1 1

6 TM P Recoverability codes Definitions cated in position 3. H Reparable item. When uneconomically reparable, condemn and dispose at the general support level. D Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal not authorized below depot level. c. National Stock Number. Indicates the National stock number assigned to the item and will be used for requisitioning purposes. d. Part Number. Indicates the primary number used by the manufacturer (individual, company, firm, corporation, or Government activity), which controls the design and characteristic of the item by means of its engineering drawings, specifications standards, and inspection requirements, to identify an item or range of items. NOTE When a stock numbered item is requisitioned, the repair part received may have a different part number than the part being replaced e. Federal Supply Code for Manufacturer (FSCM). The FSCM is a 5-digit numeric code listed in SB which is used to identify the manufacturer, distributor, or Government agency, etc. f.description. Indicates the Federal item name and, if required, a minimum description to identify the item. g. Unit of Measure (U/M). Indicates the standard of the basic quantity of the listed item as used in performing the actual maintenance function. This measure is expressed by a two-character alphabetical abbreviation (e.g., ea, in, pr, etc.). When the unit of measure differs from the unit of issue, the lowest unit of issue that will satisfy the required units of measure will be requisitioned. h. Quantity Incorporated in Unit. Indicates the quantity of the item used in the breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. 4. Special Information a. The following publication pertain to the AN/TSC-76 and its components: TM , Generator Sets, Gasoline and Diesel Engine Driven, Trailer Mounted PU- 617/M TM , Telephone Set TA-312/PT TM , Telephone Set TA-312/PT TM P, Telephone Switchboard SB- 22A/PT TM P, Telephone Switchboard SB- 22A/PT TM , Terminal, Telegraph- Telephone AN/TCC-29 (Including Terminal, Telegraph TH-22/TG and Converter Telegraph-Telephone Signal CV-425/U) TM , Terminal, Telegraph TH-22/ TG and Filter Assembly, Electrical F-316/U TM , Center Communications, Patching AN/TSC-76 TM , Teletypewriter Sets AN/FGC- 20, AN/FGC-20X, AN/FGC-21, AN/FGC-64, AN/ FGC-66, AN/FGC-67, AN/FGC-67X, AN/UGC-4, AN/UGC-29, AN/UGC-29X, AN/FGC-159, AN/ FGC-160, and Teleprinter TT-259/FG. TM P/2, Teletypewriter Sets AN/ FGC-20X and AN/UGC-4. TM P, Intercommunication Station LS-147C/FI TM P, Headset-Microphone H-91A/ U; Handset-Headset H-144/U, H-144A/U, H-144B/U, H-144C/U and Headset-Microphone H-210/G TM P, Distribution Boxes J-1077/U and J-1077A/U. TM , Army Equipment Data Sheets Generator Sets and Electric Power Plants, Truck and Trailer Mounted b. Action change codes indicated in the left-ban margin of the Wing page denote the following: N Indicates an added item. 5. How to Locate Repair Parts a. When National stock number or part number is unknown. (1) First. Using the table of contents, determine the functional group within which the repair put belongs. This is necessary since illustrations, are prepared for functional groups and listings are divided into the same groups. (2) Second. Find the illustration covering the functional group to which the repair part belongs. (3) Third. Identify the repair part on the illustration and note the illustration figure and item number of the repair part. (4) Fourth. Using the Repair Parts Listing, find the figure and item number noted on the illustration. b. When National stock number or part number is known. (1) First, Using the Index of National Sto- Numbers and Part Numbers, find the pertinent National stock number or part number. This index is in ascending NIIN sequence followed by a list of part numbers in ascending alphameric sequence cross-referenced to the illustration figure number and item number. 2 Change 1

7 (2) Second. After finding the figure and item number, locate the figure and item number in the repair parts list. 6. Abbreviations Not applicable. TM P (Next printed page is 4.1) Change 1 3

8

9 TM P Figure 1. Center, Communications Patching AN/TSC-76 (Sheet 1 of 2). Change 1 4.1

10 TM P. 4.2 Change 1 Figure 1. Center, Communication Patching AN/TSC-76 (Sheet 2 of 2).

11 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION QTY (a) (b) NATIONAL DESCRIPTION INC FIG ITEM SMR STOCK PART IN NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U\M UNIT GROUP 00 CENTER,COMMUNICATIONS PATCHING AN/TSC XDOHD S403TSC SHELTER,ELECTRICAL EQUIPMENT EA PDODD TH22TG TERMINAL,TELEGRAPH EA PDODD LS147CFI INTERCOMMUNICATIONS STATIONS EA PDODD TT98()FG TELETYPEWRITER SET EA PDODD TA312PT TELEPHONE SET EA PDODD J1077AU BOX,DISTRIBUTION EA PDODD N144U HEADSET,MICROPHONE EA PDODD SB22APT SWITCH BOARD,TELEPHONE MANUAL EA 1 N 1 9 PDODD PU-617/U GENERATOR SET EA 1 5 CHANGE 1

12 TM P Figure 2. Shelter, Electrical Equipment S-403/TSC Change 1

13 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION QTY (a) (b) NATIONAL DESCRIPTION INC FIG ITEM SMR STOCK PART IN NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U\M UNIT GROUP 08 SHELTER,ELECTRICAL EQUIPMENT S-403/TSC PAOZZ B FILTER,RADIO FREQUENCY EA PAOZZ NE LAMP,GLOW EA PAOZZ X LAMPHOLDER EA PAOZZ ZZRQ18AZ SWITCH,SENSITIVE EA PAOZZ JJ JACK,TELEPHONE EA PAHZZ SMD383873GR CABLE ASSEMBLY,TELEPHONE EA PAOZZ SMD352593GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352593GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352593GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352594GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352594GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352594GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352595GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352595GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352595GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352596GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352596GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352596GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352597GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352597GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD353597GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352598GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352598GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352598GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352599GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352599GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352599GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352617GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352617GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352618GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352618GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352619GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD352620GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD304145GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ SMD304145GR CORD ASSEMBLY,ELECTRICAL EA PAOZZ F DUMMY,PLUG,TELEPHONE EA PAOZZ DUMMY,PLUG,TELEPHONE EA PAOZZ DUMMY,PLUG,TELEPHONE EA 150 7

14 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION QTY (a) (b) NATIONAL DESCRIPTION INC FIG ITEM SMR STOCK PART IN NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U\M UNIT 2 39 PAOZZ JJ JACK,TELEPHONE EA PADZZ SMC TRANSFORMER,HYBRID EA PAOZZ SCC HAMMER,HAND EA PAHZZ U237BG CONNECTOR,PLUG,ELECTRICAL EA PAHZZ CONNECTOR,RECEPTACLE,ELECTRICAL EA PAHZZ MS3106A18-4S CONNECTOR,PLUG,ELECTRICAL EA PAOZZ SWITCH,TOGGLE EA PAHZZ MS3106A18-19P CONNECTOR,PLUG,ELECTRICAL EA 1 8/(9 BLANK)

15

16 TM P. Figure 3. 10

17 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION QTY (a) (b) NATIONAL DESCRIPTION INC FIG ITEM SMR STOCK PART IN NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U\M UNIT 3 1 PAOZZ MR36W150ACVVR VOLTMETER EA PAOZZ MR36W100ACAAR AMMETER EA PAOZZ CT11B TRANSFORMER,CURRENT EA PAHZZ Q CIRCUIT BREAKER EA PAHZZ Q CIRCUIT BREAKER EA PAHZZ Q CIRCUIT BREAKER EA PAOZZ NE LAMP,GLOW EA PAOZZ LAMPHOLDER EA PAOZZ SCB EXTRACTOR,ELECTRON TUBE EA PAOZZ SCB EXTRACTOR,ELECTRON TUBE EA PAOZZ SCC BRUSH,DUSTING BENCH EA PAOZZ SCC LANTERN,ELECTRIC EA PAOZZ JJ JACK,TELEPHONE EA PAOZZ RB BRACKET,FIRE EXTINGUISHER EA PAOZZ JJ JACK,TELEPHONE EA PAOZZ MX3543U LADDER,VEHICLE BOARDING EA PAHHH CX7453AU CABLE ASSEMBLY,POWER ELECTRICAL EA PAOZZ RC435U REEL,CABLE EA PAHZZ CONNECTOR,RECEPTACLE,ELECTRICAL EA PAOZZ LAMPHOLDER EA PAOZZ MS SWITCH,TOGGLE EA PAOZZ MX148G ROD,GROUND EA PAHZZ CONNECTOR,RECEPTACLE,ELECTRICAL EA PAOZZ SCC AXE,SINGLE BIT EA PAHZZ MS3102E18-9P CONNECTOR,RECEPTACLE,ELECTRICAL EA PAHZZ CONNECTOR,PLUG,ELECTRICAL EA PAHZZ U187AG CONNECTOR,RECEPTACLE,ELECTRICAL EA PAHZZ SCC CAP,ELECTRICAL EA PAHZZ SCC CLOCK,WALL,ELECTRIC EA PAOZZ GE SWITCH AND RECEPTACLE ASSEMBLY EA PAHZZ U-238BG CONNECTOR,RECEPTACLE,ELECTRICAL EA PAOZZ U106U POST,BINDING EA PAOZZ LH64PCS LAMPHOLDER EA 1 11

18 TM P Figure 4. 12

19 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION QTY (a) (b) NATIONAL DESCRIPTION INC FIG ITEM SMR STOCK PART IN NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U\M UNIT 4 1 PAOZZ X LAMPHOLDER EA PAOZZ SCB STARTER,FLUORESCENT EA PAHZZ P150F CAPACITOR,FIXED EA PAOZZ SCB LEAD,ELECTRICAL EA PAOZZ G457D BALLAST,LAMP EA PAOZZ P LOCK,FLUORESCENT EA PAOZZ N3780FS COVER,CONNECTOR,RECEPTACLE EA PAHZZ N CLIP,RETAINING EA PAOZZ SCC LAMP,FLUORESCENT EA PAOZZ SCC SHIELD,LAMP EA PAOZZ T8DC LAMP,INCANDESCENT EA PAOZZ LAMPHOLDER EA PAHZZ MS3102E18-9S CONNECTOR,RECEPTACLE,ELECTRICAL EA PAOZZ SCB GRIP,CABLE,WOVEN EA PAOZZ SCB GRIP,CABLE,WOVEN EA PAOZZ SCC LIGHT,EXTENSION EA PAOZZ WRS LAMP,INCANDESCENT EA 1 13

20 SECTION IV TM P NATIONAL STOCK NUMBER AND PART NUMBER INDEX NOTE: LATEST NATIONAL STOCK NUMBER ASSIGNMENTS ARE INCLUDED AT END OF INDEX FIGURE ITEM FIGURE ITEM STOCK NUMBER NO. NO. STOCK NUMBER NO. NO PART FIG. ITEM PART FIG. ITEM NUMBER FSCM NO. NO. NUMBER FSCM NO. NO. BZ2RQ18AZ SCB CX7453AU SCB F SCB GE SCB H144U SCB JJ SCB JJ SCC JJ SCC JJ SCC J1077AU SCC LH64PC SCC LS147CFI SCC MR36W100ACAAR SCC MR36W150ACVVR SCC MS SCC MS3102E18-9P SMC MS3102E18-9S SMD352593GR MS3106A18-19P SMD352593GR MS3106A18-4S SMD352593GR MX148G SMD352594GR MX3543U SMD352594GR M3780FS SMD352594GR NE SMD352595GR NE SMD352595GR N SMD352595GR P150F SMD352596GR P SMD352596GR Q SMD352596GR Q SMD352597GR Q SMD352597GR RB SMD352598GR RC435U SMD352598GR SB22APT SMD352598GR

21 SECTION IV TM P NATIONAL STOCK NUMBER AND PART NUMBER INDEX PART FIG. ITEM PART FIG. ITEM NUMBER FSCM NO. NO. NUMBER FSCM NO. NO. SMD352599GR U187AG SMD352599GR U237BG SMD352599GR SMD352617GR SMD352617GR T8DC SMD352618GR CT11B SMD352618GR SMD352619GR SMD352620GR SMD353597GR SMD383873GR WRS SMD384145GR SMD384145GR S403TSC TA312PT TH22TG B TT98()FG X U-238BG X U106U G457D LATEST NATIONAL STOCK NUMBER ASSIGNMENTS FIGURE ITEM STOCK NUMBER NO. NO LATEST PART NUMBER ASSIGNMENTS PART FIG. ITEM NUMBER FSCM NO. NO. PU-617/M ADDITIONAL LATEST NATIONAL STOCK NUMBER ASSIGNMENTS FIGURE ITEM STOCK NUMBER NO. NO /(16 BLANK) CHANGE 1

22

23

24

25

26

27

28

29

30

31 THE METRIC SYSTEM AND EQUIVALENTS

32 PIN:

33 This fine document... Was brought to you by me: Liberated Manuals -- free army and government manuals Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly available information, slap watermarks and other junk on it, and sell it. Those masters of search engine manipulation make sure that their sites that sell free information, come up first in search engines. They did not create it... They did not even scan it... Why should they get your money? Why are not letting you give those free manuals to your friends? I am setting this document FREE. This document was made by the US Government and is NOT protected by Copyright. Feel free to share, republish, sell and so on. I am not asking you for donations, fees or handouts. If you can, please provide a link to liberatedmanuals.com, so that free manuals come up first in search engines: <A HREF= Military and Government Manuals</A> Sincerely Igor Chudov Chicago Machinery Movers