Catalog 2008 / Accesories

Transcription

1 Catalog 2008 / Accesories

2 Connecting pin for anchorage (gray) Product number : # ST 006 This connecting screw is made to anchor your dock to dead weight without visible chains those being attached directly under the dock this way limiting their access to criminals. However, due to limited access, we do not recommend the use of this kind of anchorage if water level variations are superior to 2 (0,75 m). * Also available in beige # ST 007 Exterior anchoring for chain Product number : # RL 10 This stainless steel anchorage ring allows you to attach a chain from the dead weight to the dock. To be installed through an exterior lug connector. The ideal product for salted water plus it gives you the possibility to easily adjust the tension of the chains. Wall anchorage, STL Product number : # RL 21 Wall anchorage gives you the possibility of anchoring your dock to a vertical wall. The complete system is made of stainless steel. It can swivel around to follow the wave motion. Mounted on nylon pivots, it is extremely quiet. It will take only a few seconds to unhook your dock from its anchorage point. However, since it is fixed, this system should not be used when there is a water level variation. You can also use this product to anchor one of our docks, our Jetslide, or any another type of floating dock. Chain adjuster Product number : # RL 11 The adjusting chain is an economical type of anchorage for small installations. It gives you the opportunity to adjust your anchorage easily, so it can adapt to water level variations during the season.

3 Stainless steel handrail Product number : # RL 18 Handrail entirely made of stainless steel. Made in one piece no welding reducing risks of damage. Two different height openings giving you the possibility to attach them together. Note that this product is not to be considered as a lifeguard. Folding ladder Product number : # RL 12 Folding aluminum ladder with stainless steel handrails. It can be folded on itself for security purposes and also to avoid the seaweed build-up. *Also available in beige # RL 13 Candock ladder (gray) Product number : # RT 005 Ladder entirely made of plastic. It can be folded on itself for security purposes and also to avoid seaweed build-up. This is the only ladder on the market with an upward inclined slope. It can also be installed on a conventional dock. *Also available in beige # RT 006 Outboard engine bracket Product number : # RL 33 Small outboard engine aluminum bracket. Can be fixed to a platform of Candock s cubes to allow installation of a small outboard motor (10 hp max.) allowing your platform to be motor-driven. Diving board (beige) Product number : # RL 9 This is a 6 (2 m) standard diving board that has been adapted for our products. It is fixed to a cube partly filled with cement. It should be installed on the 3rd row of cubes towards the interior of the dock. *Available en Gray # RL 8

4 Post cube (gray) Product number : # ST 002 The post cube has a cylindrical opening to fit a 2 7/8 diameter galvanized steel pipe needed to anchor your installation. This post is also covered with a 3 interior diameter PVC cover and a cap. This is used not only to hide the metal pole but also to give a better plastic on plastic movement with the post cube. This particular type of anchorage is very resistant and allows your installation to follow water level variations. This is the ideal anchorage for tidal areas. Note that this system should not be used in zones where the depth is over 7 (2,25 m). * Also available in beige # ST 003 Low profile post cube (beige) Product number : # ST 005 This half post cube is used with half cubes. The half post cube has a cylindrical opening to fit a of 2 7/8 diameter galvanized steel pipe that will be used to anchor your installation. This post is also covered with a galvanised 3 PVC interior diameter and cap. This is used not only to hide the metal pole but also to give a better plastic on plastic movement with the post cube. This particular type of anchorage is very resistant and allows your installation to follow water level variations. This is the ideal anchorage for tidal areas. Note that this system should not be used in zones where the depth is over 7 (2,25 m). *Also available in gray #ST 004 Revolving and folding bench (gray) Product number : # ST 010 A padded, pivoting and folding plastic seat. Can be removed no tools required. * Also available in beige # RL 4

5 Winch for Jetslide, manual Product number : # RL 174 Winch designed to be used mainly with the Jetslide system and must be installed on a post cube. It will help launch boats that can not use their own motor power during the process. Chain 5/16 / FT Product number : # CD 028 Candock uses a grade 30 5/16 galvanized steel chain for its anchorages. 300 lb (137 kg) dead weights Product number : # ST 008 Candock can also provide if needed disk type dead weights with a central opening to pass chains through it. Easy to handle and can be added to increase the anchorage weight. 600 lb (273 kg) dead weights Product number : # ST 009 Candock can also provide if needed disk type dead weights with a central opening to pass chains through it. Easy to handle and can be added to increase the anchorage weight.

6 Pile 2 7/8 /ft Product number : # CO T Standard galvanized steel post used by Candock for anchorage with the post cube. Pile 1 11/16 /ft Product number : # CO T Standard galvanized steel post used by Candock with starting anchorage cubes when you have a small or medium size installation and when the bottom of the lake permits it (not fit for a rocky bottom). We recommend using 2 posts on each side when starting your installation at a 2-cube distance in between. The top of the posts should be covered with a cap for 1 11/16 post for safety reasons. Cap for pile 1 11/16 Product number : # MC 2.5 X1.5 X3MM Safety cap to be used with 1 11/16 pipe. PVC pipe /FT Product number : # MB 87.P40030 PVC cover used for 2 7/8 posts when you have a post cube for anchorage in your installation. Cap for PVC covering Product number : # MB Cap used to cover the PVC posts. Required when you have a post cube in your installation. We recommend to glue and screw it.

7 Canopy for Jetslide Product number : # CD 021 Light weight roof type to avoid your boat being exposed to the elements. You can install or remove it quickly. Unlike many other types of roof, Candock s canopy is designed to follow the movements of your dock thus lessening the risk of damage. Vertical bumper Product number : # RL 32 Vertical bumper designed to protect your dock as well as your boat when using any of the following: float plane, aluminum or steel boat, and aluminum pontoon. Storage cube (gray) Product number : # CD 019 Waterproof hatch cube offering you a storage space for various items. * Also available in beige # CD 020 Stab. Beam 117 for jetslide Product number : # RL 90 Stabilizing bar to be used with the Jetslide system in order to evenly distribute the total weight of your boat ensuring optimal floating conditions. This 117 (2,97 m) bar should be used with 2-cube rows on each side. Stab. Beam 155 for jetslide Product number : # RL 91 Stabilizing bar to be used with the Jetslide system in order to evenly distribute the total weight of your boat ensuring optimal floating conditions. This 155 (3,94 m) bar should be used with 3-cube rows on each side.

8 Slide yellow Product number : # CD 025 PWC winch Product number : # 143 Straight line plastic slide of 7 (2,13 m) in height (yellow or blue). It is very sturdy and does not have any mobile pieces. Fast and easy installation. The surface needed to install it is: 3 cubes x 6 cubes. * Also available in blue # CD 024 Winch to be used mainly with the Jetslide system to help launch your PWC. If needed, this winch can also be used to pull your boat on the Jetslide. It can be installed in front to pull it or on the sides for launch manoeuvres. Support for mooring whips (gray) Product number : # RL 5 Bracket to fix Dock Edge or similar type of anchorage tails to the Candock s docks. *Also available in beige RL 144 Post type hand rail Product number : # RL 149 Post type hand rail, designed to be linked by ropes at two different heights. Dock leg support Product number : # RL 95 Support that permits the insertion of a 1 11/16 pile used to anchor a dock or jetslide by sliding the pile through the tabs of the cubes. (see picture)

9 Anchoring support for 1 11/16 pile Product number : # RL 173 Support that permits the insertion of a 1 11/16'' pile used to anchor a dock or jetslide by sliding the pile through the tabs of the cubes. Pile must be inserted into the sea bed.(see picture) Wall anchorage, steel Product number : # RL 192 Wall anchorage gives you the possibility of anchoring your dock to a vertical wall. The complete system is made of steel covered with a high resistance cooked paint. It s recommended to use the stainless wall anchorage when used in a salty environement. It can swivel around to follow the wave motion. Mounted on nylon pivots, it is extremely quiet. It will take only a few seconds to unhook your dock from its anchorage point. However, since it is fixed, this system should not be used when there is a water level variation. You can also use this product to anchor one of our docks, our Jetslide, or any another type of floating dock.

10 Catalogue 2008 / Tools

11 Piling Bull (2 7/8 ) Product number : # RL 30 Use it to fix 2 7/8 poles. Faster and more efficient than the piling driver. Key for pin Product number : # RL 26 Key used for connecting pin installation. PILING DRIVER (1 11/16 ) Product number : # RL 28 Use it to put over the pole to avoid knocking it out of shape when using a sledgehammer for its installation. Key for nut Product number : # AF PF 1 Aluminum key used to fix nuts in place. Piling Driver (2 7/8 ) Product number : # RL 29 Use it over to put over the pole to avoid knocking it out of shape when using a sledgehammer for its installation.

12 Drill key for pin Product number : # RL 27 Key for connecting pins when you use a drill to reduce assembly time. Use it only with a ½ drill opening, at low speed, and hold it with 2 handles. WARNING: using a drill at high speed and/or with only one handle can cause injuries. When removing a connecting pin, always loosen the pin slightly with a manual key. Ratchet key for nut Product number : # ML 007 Pile remover (2 7/8 ) Product number : # RL 31 Use it for ratchet wrench type of nuts. We recommend using this key if you have a large quantity of nuts to install. It is also required for the installation of Candock s ladder. Use when removing 2 7/8 poles. It can be used with a car jack or an industrial one. Key for nuts, steel Product number : # RL 101 Wrench key used for closing steel nuts tightly. A very good solution to use between the aluminum key and ratchet type one.

13 2008 Catalog / Gangways

14 Gangway Econo Frame 4 X8 Product number : # RL 35 Low profile, premium quality, aluminum gangway; it is ultra light and aesthetic. This gangway is designed like all our products to be maintenance free. It is specially made to fit with premium quality plastic panels and matching standard colours of our docks. * Frame also available * Frame 3 x8 (#RL 34) * Frame 4 x8 (#RL 35) * Frame 5 x8 (#RL 160) * Frame 3 x12 (#RL 88) * Frame 4 x12 (#RL 86) * Frame 5 x12 (#RL 159) Gangway 3 X12 frame Product number : # RL 36 Premium quality aluminium gangway; it is ultra light and aesthetic. This gangway is designed like all our products to be maintenance free. It is specially made to fit with premium quality plastic panels and matching standard colours of our docks. Candock also offers you a custom made manufacturing service if you can t find a gangway meeting your specifications. NOTE: All gangways of 16 or more should be reinforced with either handrails or a gangway reinforcement. Do not hesitate to contact us on this matter. NOTE: All gangways of 16 or more should be reinforced with either handrails or a gangway reinforcement. Do not hesitate to contact us on this matter. * Frame also available : * Frame 3 x12 (#RL 36) * Frame 4 x12 (#RL 37) * Frame 5 x12 (#RL 175) * Frame 3 x16 (#RL 38) * Frame 4 x16 (#RL 39) * Frame 5 x16 (#RL 176) * Frame 3 x20 (#RL 40) * Frame 4 x20 (#RL 41) * Frame 5 x20 (#RL 177) * Frame 3 x24 (#RL 42) * Frame 3 x24 (#RL 42) * Frame 4 x24 (#RL 43) * Frame 5 x24 (#RL 178) * Frame 3 x28 (#RL 44) * Frame 4 x28 (#RL 45) * Frame 5 x28 (#RL 179) * Frame 3 x32 (#RL 46) * Frame 4 x32 (#RL 47) * Frame 5 x32 (#RL 180)

15 Handrail 42 /ft /side Product number : # RL 48 Premium quality aluminium handrail directly welded onto our gangways (not available with econo type gangways). Hand rail 42, removable, /FT /side Product number : # RL 49 Premium quality aluminium handrail. It is directly bolted on our gangways to make shipping simple and economical (not available with econo type gangways). It also facilitates storage. Reinforcement for gangway /FT Product number : # RL 50 The reinforcement for gangways is a slip type system directly welded onto our gangways in order to increase resistance (not available with econo type gangways). Transit plate 16 x3 Product number : # RL 51 Nonslip aluminum plate fixed to our gangways assures a smooth a transition between the gangway and the Candock s installation (not available with econo type gangways). This can also facilitate access with wheelchairs. * Available in the following widths: * 16 x3 (#RL 51) * 16 x4 (#RL 52) * 16 x5 (#RL 183) Departure angle 3 Product number : # RL 53 The start angle is a system allowing you to fasten a gangway to a fixed structure allowing it to follow water level variations. Available in the following widths: * Available in the following widths: * 3 (#RL 53) * 4 (#RL 54) * 5 (#RL 181)

16 Departure angle 4 econo gangway Product number : # RL 134 The start angle is a system allowing you to fasten a gangway to a fixed structure allowing it to follow water level variations. Available in the following widths: * Available in the following widths: * Frame of 3 (#RL 111) * Frame of 4 (#RL 134) * Frame of 5 (#RL 184) Departure angle 3,hd, gangway 24 and + Product number : # RL 135 High resistance starting angle is a system allowing you to fasten a gangway to a fixed structure though allowing it to follow water level variations. It is designed to be used with 24 or more gangways. * Available in the following widths : * 3 (#RL 135) * 4 (#RL 136) * 5 (#RL 182) Candock s Hinge system Product number : # RL 57 Hinge system allows you to tie an econo type gangway directly to a Candock s installation allowing it to follow water level variations. Use a 3 gangway for a dock made of 3 cubes and a 4 gangway for a dock made of 4 cubes. Entirely made of stainless steel with a nylon pivot, this system is very resistant and noiseless. Slider for gangway Product number : # RL 58 A plastic sliding piece is to be installed under the very end of the gangway dock side to allow it to move over the dock without damaging it.

17 Slider for transit plate or econo gangway Product number : # RL 59 A sliding plastic piece is to be installed under the very end of the gangway dock side or under the transition plate to allow it to move over the dock without damaging it. Roller for gangway Product number : # RL 60 Plastic covered aluminum roller to be installed under the dock end of the gangway to allow it to move on the dock without damaging it. Plastic decking 1 x 3, gray Product number : # TF 3 GRIS Premium quality non-slip openwork design plastic panel for gangways. * 1 x3 Grey (# TF 3 GRIS) * 1 x4 Grey (# TF 4 GRIS) * 1 x5 Grey (# TF 5 GRIS) * 1 x3 Beige (# TF 3 BEIGE) * 1 x4 Beige (# TF 4 BEIGE) * 1 x5 Beige (# TF 5 BEIGE) Ground anchorage for gangway, pair Product number : # RL 61 Ground anchorage system for gangway to be used when the ground type permits it.

18 Cataloge 2008 / Basic products

19 Cube (gray) Product number : # LK G This cube is the base element for all kinds of construction for your installations. * Also available in beige # LK B Corner cube (gray) Product number : # LK G The corner cube is specifically designed to improve the aesthetic quality as well as the strength of our docks for when an installation with changes in direction is needed. (e.g. T, L or marina style). This corner cube is used to modify angles ranging from 90 to 45 degrees. It can also be used to create octogonal forms or to create a 45 degree angle dock only Candock can offer you this option. Also available in beige # LK B Cube low profile (gray) Product number : # LK G The low profile cube is a basic unit to construct your installation. It is mainly used to accommodate rowboats such as canoes and kayaks. Its edge being closer to the shore line greatly facilitates boarding. It can also be used to create bridges allowing small floating debris to circulate freely or to create access gangways. * Also available in beige # LK B Connecting pin (gray) Product number : # LK G The connecting pin is the master piece holding the cubes together. Our connecting pin is made to join a sliding nut which slides over the cubes, this way giving the whole structure a superior resistance; better than any other similar type of dock straping systems on the market. * Also available in beige # LK B

20 Bumpers Product number : # TM99931 Bumpers are used to offer an additional protection to boats boarding the dock. Our bumpers have a vacuum valve allowing you to adjust the pressure in it. We recommend the use of bumpers which should be added to every 10 feet (3 m) in length. For example: a 25 feet boat (8 m) = add 3 bumpers. * Also available in grey and white Cleat Product number : # LK Cleat used to anchor your boat to the dock. We recommend using a cleat for each 10 (3 m) length. For example: a 25 (8 m) long boat = use 3 cleats. Our docks move all the time, as does your boat, thus avoiding any unnecessary tension on the cleats. However, when you expect severe weather conditions, we recommend to tie it directly to the ears or pass it through the exterior lug connector. Our cleats are made of highly resistant plastic but less resistant than metal ones can be. (boxes of 20) Sliding nut Product number : # LK Sliding nut that goes over one of the ears of our cubes and connects to the connecting pin to form a structure. (boxes of 105) Spacer Product number : # LK The nut is connected with the exterior lug connector to form a structure. (boxes of 125)

21 Ext lug connector Product number : # LK This bolt is used to increase the overall resistance of the dock. Even if it is not required for the majority of docks, we still highly recommend it when your installation may be exposed to the worse conditions (e.g. strong waves, work platform, boarding large size boats, etc.). Note that exterior lug connectors are always required for Jetslide s installations. (boxes of 50) Nut Product number : # LK Candock s cubes are equipped with 4 ears, positionned at various heights. Due to the space created between them, the spacer will be used to fill this empty space. Spacers are mainly used for the Jetslide s assembly. (boxes of 225) Half-Jetslide (gray) Product number : # RT 003 The half-jetslide works based on the same principle as the Jetslide. It is made to adapt more easily to different lengths of boats. * Also available in beige # RT 004

22 JetSlide (gray) Product number : # RT 001 The Jetslide is a dry dock that can be combined to our other cubes to form a complete system. This system allows you to place your boat in a dry spot without the need of mechanic aid. You simply need to drive your boat on the Jetslide using the boat s energy. The Jetslide is larger and therefore can better support your boat. In addition, it will not only support your boat on all its length but also on a 6 surface on each side. Other systems will only support the weight of your boat in the center or on the corner of a cube which exercises pressure on the hull. The Jetslide also has a much studied and specially designed form conceived to adapt to almost any kind of hulls. Our system does not have any mobile parts that can be damaged over time or, for example, rollers that can lock if not properly maintenanced mostly due to salted water. Some will say that a dry dock system made of small units allows this system to better resist to waves, and it is exactly the truth. This is the reason why our docks are modular. However, it is not a common use for a dry dock system. When these small units will move with waves under the hull of your boat, the back and forth movement on the hull will wear out your gel coat and also damage your paint in a short period of time. However, is it wise to leave a very expensive boat on a dry dock when waves are over 3 feet (1 m)? But, since the Jetslide is made of one unique very resistant piece, it will not damaged your boat in any way. The Jetslide system offers you a high capacity flotation; it will then be easier to back up into water than with many other systems where your boat is directly in contact with water or very near the surface line. As a standard feature, Candock also offers you a larger space to move around your boat. The enterance point of our system is at water level; this will eliminate all forms of impact with your boat. This is completely different if you have rollers that deteriorate rapidly under repetitive impacts, or regular cubes that will tear and get full of water rendering the system completely unusable. * Also available in beige #RT 002

23 Catalog 2008 / Promotionnal clothing

24 T-shirt Numéro de produit : # CJ % cotton t-shirt with Candock s small logo on the front left side and a large one in the back. SIZE S TO 5XL (LARGE SHOWN) Cap Numéro de produit : # CJ FP461 Candock s grey cap with a royal blue brim Candock polo Numéro de produit : # CJ Candock s grey and white polo shirt. Note that Candock s logo is embroidered on the left side, in front, and also has a large silk-screen logo on the back. SIZE S TO 3XL (MEDIUM SHOWN) Candock shirt Numéro de produit : # CJ Candock s grey shirt with long sleeves. Candock s logo is embroidered on the front left side. SIZE S TO 5XL (LARGE SHOWN) Shell type Candock coat Numéro de produit : # CJ Candock s grey and black shell style jacket. Candock s small logo is embroidered on the front left side, and another is centered in the back. SIZE S TO 2XL (MAN) SMALL SHOWN SIZE XS TO 2XL (WOMAN)