Worldwide Regulatory Compliance Engineering and Environmental Affairs. MARKETING NAME*: Dell PERC H310 Mini Monolithic

Transcription

1 MARKETING NAME*: Dell PERC H310 Mini Monolithic REGULATORY MODEL: UCSM-800 EFFECTIVE DATE: August 18, 2011 Dell Inc. TABLE OF CONTENTS FOR PRODUCT SAFETY, EMC & ENVIRONMENTAL DATASHEET Regulatory I. Product Safety II. Electromagnetic Compatibility III. Ergonomics, Acoustics, and Hygienics IV. Power Cords and User Documentation V. Datasheet Responsible Party Name and Address VI. Trade Import/Export Compliance Data Environmental VII. Card Weight VIII. Declarations and Certifications IX. Performance Data X. Product Materials Information XI. Packaging XII. Batteries XIII. Design for Environment XIV. Recycling/End-of-Life Service Information XV. Dell Corporate Environmental Information I. PRODUCT SAFETY 1 The product has been certified and bears the Mark, as applicable, of the Product Safety authorities as indicated below. Country/Region Authority or Mark Canada SCC European Union CE Germany TUV SUD IECEE IECEE CB United States NRTL II. ELECTROMAGNETIC COMPATIBILITY 2 The product has been certified and bears the Mark, as applicable, of the EMC authorities as indicated below. Country/Region Authority or Mark Class Australia / New Zealand ACMA (C-Tick) Class A Canada ICES Class A European Union CE Class A Japan VCCI Class A South Korea KC Class A United States FCC Class A III. ERGONOMICS, ACOUSTICS AND HYGIENICS 3 The product has been certified and bears the Mark, as applicable, of the Ergonomics, Acoustics and Hygienics authorities as indicated below. Country/Region None Authority or Mark * Notice: This product has been assigned a unique regulatory model and regulatory type that is imprinted on the product shipping invoice and product labeling to provide traceability to the regulatory approvals noted on this datasheet. This datasheet applies to any product that utilizes the assigned regulatory model and type including marketing names other than those listed on this datasheet. Requests for specific information on product regulatory approvals should reference the assigned product regulatory model and type. 1 The above-listed Product Safety certifications may vary depending upon the location of the factory and specific product configuration. Certification marks may not be applied on products for countries outside the purchaser s country. 2 The above-listed EMC certifications may vary depending upon the location of the factory and specific product configuration. Certification marks may not be applied on products for countries outside the purchaser s country. 3 The above-listed Ergonomics, Acoustics and Hygienics certifications may vary depending upon the location of the factory and specific product configuration. Certification marks may not be applied on products for countries outside the purchaser s country. Page 1

2 IV. POWER CORDS AND USER DOCUMENTATION Dell products are provided with the power cord and user documentation suitable for the intended country of delivery. Products that are relocated to other countries should use nationally certified power cords and plugs to ensure safe operation of the product. Contact Dell to determine if alternate power cords or user documentation in other languages is available for your market. V. DATASHEET RESPONSIBLE PARTY NAME AND ADDRESS Dell Inc. Department: Global Regulations and Standards MS: PS4-30 Round Rock, Texas 78682, USA VI. TRADE (IMPORT/EXPORT) COMPLIANCE DATA For any questions related to importing & exporting classification of Dell products, please obtain information from the following link: or send request to VII. CARD WEIGHT Part Weight, (unit: g) Product Regulatory Model # 81 UCSM-800 Formatted Table VIII. DECLARATIONS AND CERTIFICATIONS This system received the following approvals and may be labeled with one or more of these marks depending on point of purchase: Dell s Energy Star qualified products are listed on the EPA website here Information on Dell s participation in various Eco-labels and Green Standards can be found here. IX. PERFORMANCE DATA Energy Consumption 4 Energy efficiency benefits the environment and lowers the total cost of equipment ownership by reducing power consumption. Dell offers energy calculators that help estimate power needs, potential emissions avoidance and potential cost savings. Click here for Dell s Client Energy Savings Calculator, Data Center Capacity Planner, and Monitor Power Savings Calculator. Information on Energy Efficiency is available here 4 This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied. Page 2

3 X. PRODUCT MATERIALS INFORMATION 5 Dell has implemented process controls and corrective actions throughout its organization and supply chain to ensure that its chemicals management objectives are met and that the targeted restricted materials are replaced and alternative materials are developed for future product generations. Process controls that Dell implemented include piece-part supplier declarations and Dell factory and supplier material testing audits. To review Dell s Restricted Material Guidance document click here. Information on Dell s material use is available here. Restricted Substances Through internal design controls and supply chain declarations, this system has been verified to comply with the EU RoHS Directive. For more details, see All Dell products shipping directly into China which are manufactured on or after March 1st, 2007, will be China RoHS compliant. For more details, see All Dell products shipping to South Korea are compliant with South Korea RoHS requirements, declarations here. Information on Japan RoHS (J-MOSS) chemical disclosures is available here. REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, 1907/2006) is the European Union s (EU) chemical substances regulatory framework. Dell complies with the REACH directive. For more details, see This Dell product does NOT contain any of the following substances (in concentrations exceeding legal threshold limits): Asbestos Azo dyes/colorants in components that come into direct contact with human skin Cadmium and its compounds (except for use in applications exempted by the EU RoHS Directive) Ozone Depleting Substances; Class I and Class II CFCs (chlorofluorocarbons) and HCFCs (hydrofluorocarbons) Chloroparaffins, short chained (10-13 carbon chain) Chromium VI and its compounds (except for use in applications exempted by the EU RoHS Directive) Halogenated dioxins or furans (i.e. polychlorinated dibenzodioxines, polychlorinated dibenzofurans) Lead and its compounds (except for use in applications exempted by the EU RoHS Directive) Mercury (except for use in applications exempted by the EU RoHS Directive) Nickel and its compounds in components that are likely to result in prolonged skin exposure PCBs (polychlorobiphenyls) PCTs (polychloroterphenyls) PBBs (polybromobiphenyls) PBDEs (polybrominated diphenylethers) BFR (brominated flame retardants) and PVC (polyvinyl chloride) in plastic parts greater than 25 grams Polychlorinated naphthalenes (PCNs) Tributyl tin (TBT) Triphenyl tin (TPT) 5 Waste Handling. Local regulations should be observed when disposing of this product due to the presence of the materials and substances as listed above. Page 3

4 Additional Materials Information External and/or Internal cables may use PVC as an insulating material to ensure product safety The case material is, >PC+ABS < Product may contain post-industrial recycled content (plastics, metal, glass) This product contains 0% post-consumer recycled plastic Materials that may require special handling, please see WEEE Product End-of-Life Instructions here Marking of plastic parts greater than 25 grams are done in accordance with ISO (see below) Flame Retardants Used in Motherboard Part PCB Flame Retardant TBBPA Formatted Table Flame Retardants Used in Mechanical Plastic Parts > 25 grams Resin Material Name PC+ABS Marking per ISO 11469:2000, 11469:1996 >PC+ABS FR(40)< Flame Retardant Marking per ISO (i.e. FR(16), FR(40), etc.) FR(40) Flame Retardant (i.e. TBBPA, triaryl phosphate ester, etc.) TPP (Triphenyl phosphate) List applicable R-Phrase(s) or Hazard Statement(s) per EU Directive 67/548/EEG or 1272/2008 N/A XI. PACKAGING Information on Dell s sustainable packaging effort available here. No CFCs (chlorofluorocarbons), HCFCs (hydrofluorocarbons) or other ozone depleting substances are used in packaging material. Chromium, lead, mercury, cadmium are not intentionally added to packaging materials and are not present in a cumulative concentration greater than 100 ppm as incidental impurities. No halogenated plastics or polymers are used for packaging material. Dell complies with the EU Directive 94/62/EEC. Plastics packaging materials marked according to SPI (Society of Plastics Industry) Coding System. Additional materials restricted in Packaging as per Dell s Restricted Material Guidance document found here. Packaging Materials for Model E05J Corrugated Fiberboard EPE Total Weight of each Material type, (kg).07kg.02kg Formatted Table Printed user documentation is bleached in a chlorine-free process. Page 4

5 XII. BATTERIES Below is a listing of batteries that could be present in the product: Battery Description Internal Batteries Battery Type Battery Weight (g) None Batteries used in this product are in compliance with EU Battery Directive 2006/66/EC. Batteries in this product are not based on mercury, lead or cadmium technologies. Information about takeback and the recycling of batteries can be found in the in the Recyclability section below. The product documentation includes instructional information on the proper removal and disposal of the batteries used in this product. Dell MSDS sheets available here. XIII. DESIGN FOR ENVIRONMENT Longevity and Upgrading Dell systems are, when applicable, designed for easy assembly, disassembly, and servicing. Connections are easy to find and accessible with commonly available tools. To extend the life of your system, you can install or upgrade certain system components (e.g., microprocessor, memory, expansion cards, optical drives, and storage devices). Spare parts (such as batteries, power supplies, keyboard parts) are available after the end of production for up to five years, or otherwise through the warranty period. Recyclability Information for recycling is available here. For recyclability, this system incorporates the following design guidelines: EU WEEE mark is applied to products sold in Europe, EU recycling information can be found at WEEE Product End-of-Life Instructions are available here Plastic parts heavier than 25g have material codes according to ISO 11469:2000. Minimal use of composite structure materials. Minimal use of non-separable connections, such as gluing and welding between different materials Painting/coating of plastics <100 grams is compatible with recycling or reuse Mechanical plastic parts greater than 100 grams consist of one material or of easily separable materials. XIV. RECYCLING/ END-OF-LIFE SERVICE INFORMATION Take back and recycling services are offered for this product in certain countries. If you want to dispose of system components, contact Dell for instructions by ing recycling_emea@dell.com or visit and select the relevant country. Page 5

6 XV. DELL CORPORATE ENVIRONMENTAL INFORMATION Information on Dell s Environmental initiatives, policies, programs and goals can be found at Dell s Corporate Responsibility Policies are available here. Product Safety, EMC and Environmental Datasheets for Dell products are located at: Dell is a member of the Electronic Industry Citizenship Coalition ( Dell s commitment to accountability and assurance is further demonstrated in leveraging the Global Reporting Initiatives (GRI) G3 Guidelines in the preparation of our annual summary report and Web site. We are selfreporting at a B level and have submitted our self-report to GRI to check it against the criteria for GRI Application Level B. To view GRI Index 2009 click here. Dell holds International Organization for Standardization (ISO) and Occupational Health & Safety Assessment Series (OHSAS) certifications/registrations in a number of important areas including global product development and recycling/take-*back programs, quality, safety, and health and environment. You can view or download copies of certificates here. Information related to Supplier Responsibility is available here. Page 6