Conveyor-belt system: on board of semitrailer, with pulling steel cables,

Transcription

1 Robust, easy and versatile the automatic Conveyor-belt system MOVECO SYSTEMS, enables to load and unload every kind of: pallets cases, boxes, paper reels, white goods, bulk loads as of every size. The equipment may also be mounted into frozen body. The Conveyor-belt system has a capacity of: or kg, and it is perfect on the loading-unloading docks too.

2 An electric equipment with PLC aboard, inside a s. steel box, enables all the controls of the operation. The Conveyor-belt is driven by hydraulic motors, with electro-hydraulic power pack and constant speed control system. The front motors, with cable winch, pull the Conveyor-belt, with the load, forward, rewinding the steel cables. A rear winding drum, underneath the trailer s floor, rolls up the Conveyorbelt, when unloading.

3 Conveyor-belt system: on board of semitrailer, with pulling steel cables, cross member junction and limit switch, linked to a dock conveyor-belt, flush with the floor. Dock connecting circuit and cable-end push button board for local control. Skid docking brackets, with trailer docked sensors, for the correct alignment and levelling of the semitrailers.

4 The Conveyor-belt on the dock can be crossed by AGV and FLT to every direction so that it doesn t obstruct the traffic and all the space of the warehouse and docks is kept free and available. The Conveyor-belt slips throughout the semitrailer s loading platform and it has a thickness of 4 mm only, so IT DOESN T AFFECT THE INSIDE USEFUL HEIGHT FOR THE LOAD. Conveyor-belt system on board, can couple with the different loading-unloading Moveco Systems automatic docks.

5 CONVEYOR-BELT, automatic loading-unloading system, for SEMITRAILERS and DOCKS. - Power for the conveyor-belt can be supplied, to the semitrailer from the dock AC power supply, when linked using a quick disconnect plug and socket device. - Once docked, the driver plugs in the power supply and links the controls of the trailer to the conveyor system of the dock and he drives the load, in one fluid movement, either via a handheld push-button panel on the trailer, or by the dock conveyor control board. - On the semitrailers, the Conveyor-belt with pulling steel cables, covers the whole loading platform s width and length. - The front cable winch unit, which pulls the Conveyor belt, together with the load, forward, has to rewind only the cables and it is installed outside the front trailer wall. During unloading, the unrolled cables, as well as the front cross beam, run free on the floor. - The rear motor rolls up the Conveyor belt when unloading. - A frame, housing the winding roll and the drive unit, is placed underneath the trailer platform rear end. - An inverter is used to synchronize the working speed of the conveyor-belt electric motors, at the dock side, while on the trailer it can be adjusted by a hydroelectric system, controlled by PLC and encoder aboard. - The Conveyor belt aboard the semitrailer can be driven by two or four HYDRAULIC motors, according to the weight to move. - The hydraulic motors of the semitrailer s conveyor-belt, can be controlled by an independent hydraulic power pack, with electric motor, tank and pump, placed on board, or via a Power Take Off ( P.T.O.) and in this case the engine of the truck must be running during the operations. MOVECO SYSTEMS DOCK CONVEYOR-BELT, FOR INTEGRATED LOADING-UNLOADING SYSTEMS: - The Conveyor-belt, placed flush with the floor on the docks, is endless, always covering the complete underneath floor length, so that the FLT or LGV can cross or drive on it, back and forth whenever necessary. - The Conveyor belt covers entirely the floor, so it enables to convey also goods which are not on pallets and any kind of packing, like paper reel, white goods, cases, boxes and so on. - On the docks, the front and rear electric motor drive units, with winding drums, are installed into pits, underneath the floor and belt. - During loading-unloading the pulling motor and the opposite counter motor keep the conveyor-belt stretched. The trailer-side Conveyor belt drive unit, must always be fitted below the floor level, keeping the conveyor belt running on the floor. The drive unit can be installed outside the dock edge, with a suitable frame, or into a pit, at the warehouse dock edge. The opposite side drive unit, can be fitted into a pit in the floor, at the rear end of the Conveyor belt. - The carpet drums, winding and rewinding a triple length carpet, enable the conveyor-belt to always cover the floor. Moveco Systems can study a custom built solution, according to the project, so meeting the special requirements of each Customer.

6

7