ICX-CMOS-E-1999 Lead I&C Engineer PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS

Transcription

1 ICX-CMOS-E-1999 Lead I&C Engineer Holds a B. Sc. in Electronics & Communication Engineering and has over 14 years hands-on experience in the field of Instrumentation & Control related to the field of procurement, installation, construction supervision, calibration, maintenance, pre-commissioning, commissioning and start-up in the power stations gained on international projects. PERSONAL DATA Nationality : Egyptian Birth Date : 28/08/1976 Gender : Male Marital Status : Married Residence : Kuwait EDUCATION : B. Sc. in Electronics & Communication Engineering, Alexandria University, 1999 LANGUAGES Arabic English : Native Language : Fluent COMPUTER SKILLS : Windows, MS Office, Internet : Unix : Linux : DCS Network System TRAINING COURSES AND CERTIFICATIONS : Training course for ALSPA P320 DCS in France by Alstom (from Feb. till Apr. 2005). : SPEEDTRONIC MARK V control system course at ABU SULTAN Power Station by GE. : Excitation system (EX2000) course at EL-KUREIMAT Power Station by GE. : Teleperm XP training in Nubaria Power Station by Siemens. : TXP system administration training in Nubaria Power Station by Siemens. : Turbine governor training in Nubaria Power Station by Siemens. : EMPC Asset & Work Training course at EL-KUREIMAT Power Station. Page 1 of 3 Updated: Nov. 2013

2 : Basic operating training course at Damanhour include gas turbine control system (TELPERM XP) by Siemens. : Teleperm XP OJT at Nubaria Power Station from Jun. till Oct by Siemens. : Siamtic S7 PLC training in Azzour Power Station by Siemens. : SPPA T3000 training in Azzour Power Station by Siemens. : Continuous emission monitoring system training by Altech USA. : Basic operating training course at Azzour Power Station in Kuwait by Siemens, include Combined Cycle Power Station control systems for the steam Turbine, HRSG and the Water Steam Cycle. : Demineralization water plant training (operation and maintenance) by HWT GmbH. : Administrator / Instructor training or the combined cycle simulator (SIMIT) by Siemens at Azzour Power Station in Kuwait, Feb : HRSG maintenance training by CMI ENERGI at Azzour Power Station in Kuwait, Mar : Siemens Technology Editor (Tec4function) training at Azzour Power Station in Kuwait. : Fire fighting system training at Azzour power station by Minimax GmbH & Co. KG. : HVAC systems training at Azzour Power Station by Kraftanlagen Muenchen GmbH. : Computer courses. : TOEFL from AMIDEAST. CHRONOLOGICAL EXPERIENCE RECORD Dates Employer Project Job title Job Description : From Apr till now : MEW Kuwait : Azzour South Power Station Kuwait : Senior I&C Engineer : Responsible for I&C maintenance of the 8 Siemens Gas turbine V94.2A (SGT5-2000E) and 8 CMI HRSGs and 2 Siemens steam turbine (SSTx-4000), apply the required maintenance program on all instruments and equipments to minimize problems and shutdown scheduling to ensure timely and appropriate solutions are adopted avoiding major breakdown. Responsible for routine, preventive and corrective maintenance for combined cycle control system (TXP / SPPA T2000). Responsible for routine, preventive and corrective maintenance of the fail safe systems for the gas turbine protection system S5 95 F system and boiler protection S7 315 F system, able to make simulation to any signal. Responsible for routine, preventive and corrective maintenance for the turbine controller (governor) Simadyn D for the gas turbine and Core I&C system for the steam turbine and have practical experience with IBS program, Struc (G and L), NML, Rcop, profibus and Siemens Technology Editor Tec4function programs, able to make simulation, troubleshooting, analysis and tracing for any signal. Page 2 of 3 Updated: Nov. 2013

3 Perform the IGV and the control valves stroke adjustments and commissioning and able to do Gas turbine commissioning and tuning. Responsible for the DCS (TXP / SPPA T2000) system administration. Responsible for routine, preventive and corrective maintenance of S7 PLCs and the operating panels in the plant using the Simatic manager, Protool, Win CC Flexible and Prosave. Perform preventive, corrective and diagnostic maintenance on the process control systems and control loops. And perform the required routine maintenance (daily, weekly, monthly, etc. for all systems. Good hands on working experience in repair, testing & calibration of various Instrument with in-depth technical knowledge of process Instrument / Sensors / Transmitters, Control Valves, etc. Hands-on experience on Vibrometer VM600 vibration monitoring system including configuration of system cards and calibration of probes and proximetors. Hands-on experience on Dolphin data logger (flight recorder) including the configuration of system cards and the use of the Bus manger program. Responsible for the Win_TS & Win CC systems maintenance/administration. Responsible for review plant maintenance activities during testing, troubleshooting, preventive and breakdown maintenance of plant instrumentation and turbine control system and along with associated equipment and provide procedures and standards to improve these activities. Prepare the recommended spare parts for the future and inspect the incoming new materials and conduct material evaluation to determine acceptability based on purchase acceptance standard set by the MEW. Supervise the erection and the commissioning of the Azzour combined cycle extension project, carry out other activities in connection with project progress and plant commissioning. Co-ordinate I&C commissioning activities related to the new plant/equipment. Knowledge of operation / commissioning related to thermal Power Plant with the combined cycle project. Responsible for routine, preventive and corrective maintenance OGS (operating guide simulator) using SIMIT. Hands-on experience on MOV`s (Auma). Responsible for the I&C maintenance of Natural Gas receiving station, fuel oil transfer system, fuel oil forwarding system, gas and oil metering systems, flow computers (Instromet) and gas chromatograph analyzer (Daniel model 550). Dates : From Oct till Apr Employer : Middle Delta Electricity Production Co. (MDEPC) Project : Nubaria Combined Cycle Power Station 3x750MW Job title : I&C Engineer Job Description : Participate in the evaluation, comparison and studying of DCS bids for Nubaria project with the consultant. Supervise the construction. Participate in the performance calculation of the Gas Turbine (94.3A). Page 3 of 3 Updated: Nov. 2013

4 Responsible for the routine and the corrective maintenance for the gas turbine governor (Simadyn D) and has dealing experience with Struc (G and L), NML program and profibus program. Responsible for the routine and the corrective maintenance for the gas turbine control system Teleperm XP and its instrumentation. Responsible for the routine and the corrective maintenance for the gas turbine protection system S5 95 F system. Review and comment on all I&C construction documents and drawings. Co-ordinate the day to day activity related to I&C plant equipment commissioning. Monitor and report any I&C defect / deficiency in the plant or any deviation from the contractually specified scope. Prepare weekly, quarterly and annual report of I&C activities in the plant. Carry out other activities in connection with project progress and plant commissioning. Co-ordinate I&C commissioning activities related to the new plant/equipment. Knowledge of operation / commissioning related to thermal Power Plant with the Gas Turbine (94.3A). Responsible for the TXP system administration. Dates : From Mar till Oct Employer : Upper Egypt Electricity Production Co. (UEEPC) Project : El-Kureimat Power Station 2x650MW Job title : I&C Engineer Job Description : In charge of maintenance and supervise the GE turbine control system (MARK V). Diagnostic check, troubleshooting and maintenance of I&C equipment in the power plant through control loops and ladders, field instruments and control actuators, calibration and maintenance. Prepare weekly, quarterly and annual reports of I&C activities. Hands-on experience on Bently Nevada 3300 vibration monitoring system including configuration of system cards and calibration of probes and proximeters. Prepare the recommended spare parts for the future planning. Hands-on experience on MOV`s (Limitorque and rotork). Dates : From Aug till Mar Employer : SFCO Company for manufacturing of the agriculture products Job title : I&C Engineer Job Description : Hands-on experience in start-up of above mentioned plant and also covered emergency on call duty (one week in a month). Attending troubleshooting in minimum down time of equipment. Hands-on experience on all types of process field instruments (pressure, flow, level and temperature elements, transmitters, valves, MOVs, controllers and communicators) including smart valve positioners. Involved in daily preventive, breakdown maintenance of above mentioned plant systems and instruments. Performed various modifications and upgrade jobs in existing plant and commissioned successfully with as-built drawings. Page 4 of 3 Updated: Nov. 2013

5 Assisted to supervisor and to Sr. Control Engineer for work planning, material spare parts ordering, maintenance job procedures and scheduling. Field of experience : Experience in the field of Instrumentation & Control related to the field of procurement, installation, construction supervision, calibration, maintenance, pre-commissioning, commissioning and start-up in the power stations gained on international projects. Experience in diagnostic check, troubleshooting and maintenance of instrumentation and control in Power plant. Through understanding of Control Loops, Field instruments and Control Actuator, Calibration and Maintenance. Knowledge and working experience on different control system such as DCS, PLC, Fire Fighting Systems. Practical experience in Siemens DCS Systems Telperm XP/SPPA T2000, SPPA T3000/TDY, Win CC, Win CC flexible, Operating panels HMI, Simadyn-D Controller, Core I&C controller, FAIL Safe systems (S5 95F system & 315 F System), PLCs SIAMTIC-S5 / S7, Win-TS system, Flight recorder, Vibration monitoring system (VM 600), Allen Bradley PLCs, Fire fighting and detection system (Kidde Italia, Minimax), gas detection system (Zellweger/Honeywell, DRAGER), gas flow computers, gas chromatograph analyzers, Continuous emission monitoring system (CEMS), GE-Speedtronic Mark V, GE-Mark VI, Alstom ALSPA P320 DCS System. Capable to do all required Maintenance and Commissioning for Siemens control systems. Able to create/modify logic/function Diagrams and MMI Diagrams. Capable to stroke and do the adjustments of the control valves and IGV. Able to perform the optimization/ tuning of the Gas Turbine. Good working experiences with Gas and Steam Turbines and HRSGs. Capable to follow the progress of all projects assigned during design and construction phase. Capable to plan, prepare, and execute start-up and commissioning activities for turbine controls such as Steam, Gas turbine control application. Good working experiences with Start-up and commissioning of compressor control systems. Supervision and technical direction of craft labour and technicians performing installation of turbine controls and related interface devices. Perform administrative functions such as writing technical reports, ordering materials, preparing job status reports, reports to customers, time and expense sheets on a complete and timely basis. Having hands on experience in routine, breakdown, preventive maintenance and shut down activities in power plants. Proficient in interpretation of control diagrams including PID, Ladder logic, hard wire relay logic, function blocks and loop drawings. Well aware of industrial job safety procedures, precautions and plant HSE standards. Good working experiences with hazardous area instrumentations in the field of gas and oil. Good working experiences with fail safe systems and ESD. Page 5 of 3 Updated: Nov. 2013

6 Tender evaluation. Good knowledge of the international standards (ASME, IEEE, ISA, NEC and IEC). Page 6 of 3 Updated: Nov. 2013