Company Profile TITUS TECHNOLOGIES & SERVICES SDN BHD ( H)

Transcription

1 Company Profile TITUS TECHNOLOGIES & SERVICES SDN BHD ( H)

2 INTRODUCTION Combining modern equipment, experience and knowledgeable people, give us the confident and ability to design and manufacture in high precision of specialized sampling equipment and providing services for upstream and downstream sectors of oil and gas industry including supply and maintenance for various types of oil and gas equipment. We are also providing upstream services by representing various companies as our principal. Equipped with excellence track records, our principals can provide good quality services for oil and gas companies. ABOUT US VISION Our vision is to become a renowned worldwide solutions provider to oil & industries. In Titus, we are committed to deliver precise and reliable products and services to our clients. We are striving to excellent through underlay guidance as our core values. Precision Technology Expansion

3 COMPANY DETAIL Name of Company : Titus Technologies & Services Sdn Bhd Business Address : Lot 3.30B, Tingkat 2, Medan MARA, Jalan Raja Laut, Kuala Lumpur. Telephone Number: Fax Number : admin@titus.com.my Date of Incorporation: 27th August 2007 Company Registration No.: H Website:

4 PRODUCTS & SERVICES PRODUCTS PVT Sample Cylinders PVT Oil Cylinder PVT Gas Cylinder Micro Gas Cylinder Single Phase Cylinder Real Time Monitoring for Drilling Operation Drilling Monitoring (NDM) Drilling Report (NDR) SERVICES Well Services Sand Monitoring Light Weight & Compact Well Testing/Metering/Calibration MPFM Well Testing/Metering Seismic Services Marine Seismic Data Acquisition Land Seismic Data Acquisition Seismic Data Processing/Reprocessing G&G Data Interpretation Services

5 PRODUCTS SAMPLE CYLINDERS We manufacture a wide range of samples cylinders for hydrocarbon and water sampling activities. These cylinders have been tested and proven reliability and certified accordingly by Det Norske Veritas (DNV). PVT Oil Sample Cylinder Titan 700 Titus standard 700cc PVT sample cylinder is used for standard PVT sampling activities together with Titan 5000 gas cylinder from the surface separator. The cylinder can also be used for other pressurized sampling of hydrocarbon or formation water. PVT Gas Sample Cylinder Titan 5000 The PVT gas sample cylinder with 5L capacity is designed following the study done in the lab for a maximum volume of gas required for PVT analysis. 5L volume of piston type gas sample cylinder is found to be more than enough for PVT analysis. With high pressure rating of the cylinder, transfer activities from conventional gas bottle to recombination cylinder can be eliminated thus provides more secure and faster physical recombination of fluids in the laboratory. Titan 20L In addition, normal 20L gas cylinder is also available according to the specifications required for PVT and hydrocarbon sampling requirements.

6 Micro Gas Sample Cylinder Titan 150 Titus micro gas sample cylinder is dedicated for onsite analysis purposes. High pressure samples from Single-Phase Reservoir Sampler or wellhead can be transferred into this cylinder for immediate onsite analysis on micro-gc or others. High pressure rating of this cylinder provides assurance of safety in related to flashing activities from high pressure wireline or wellhead samples. Other type of small sample cylinder is also available i.e. stainless steel and sulfinert type cylinder. Single Phase Sample Cylinder Titan 700-SPS The single phase sample cylinder is used for monophasic sampling, transportation and storage. Single phase samples which are transferred into this cylinder are kept in single phase condition through maintaining the sample pressure above reservoir pressure. Nitrogen compensation due chamber to transportation or storage. provides heat effect pressure during

7 REAL TIME MONITORING FOR DRILLING OPERATION Real Time Monitoring for Drilling Operation Historically, sound judgments and effective decisions in drilling operation always require experts to be present on the field to fetch necessary data. But with the rapid increase in oil demand worldwide, oil companies are faced with the challenge of expert scarcity. Navita Drilling Monitoring (NDM) in drilling is the answer to oil companies that expect up to-date expert information in real-time mode. NDM Suites will transmit data from many locations to head office in real-time which enables experts in head office to monitor, analyze and make sound decisions for many locations at a time. Therefore, with NDM operational cost is reduced and personal exposure time at the rig site is minimized. Benefit : o Improved communication among asset team members o Easing you to monitor plan vs actual o As a tool for your effort to reduce Non Productive Time (NPT) o Optimized experience resources o Our in-dependency and neutrality allows us to develop strong relationships with customer o Integration with Navita Drilling Report (NDR) for customer easiness Drilling is among the most important and risky activities in the petroleum industry. It utilizes complex equipment and requires qualified people to be cost effective and timely, to achieve a successful goal zero accident free target. Real time drilling operation monitoring will help you streamline your drilling operations and accelerate your success. Daily Drilling Report Management reporting is as crucial as real-time data for analysis. It provides management with progress and performance of operation on the field for

8 decision making process. Manual data entry for half-day or daily report by engineers is costly, prone to human error and leads to time consuming administration and data management. Navita Drilling Report (NDR) can retrieve realtime data and utilize the data to automatically generate management report anytime and anywhere, therefore avoiding the risk of field reporting and risk of human error. Furthermore with or archive management system, NDR can also recall previous report easily.

9 SERVICES Well Services Sand Monitoring Light Weight & Compact Well Testing/Metering/Calibration MPFM Well Testing/Metering Seismic Services Marine Seismic Data Acquisition Land Seismic Data Acquisition Seismic Data Processing/Reprocessing G&G Data Interpretation Services WELL SERVICES Sand Monitoring via Portable Roxar Meter Non Intrusive & Intrusive Type Non-Intrusive Type Titus utilizes sand monitors from Roxar for its sand monitoring services via non-intrusive sand monitor systems. The portable Roxar sand monitor is a compact, non-intrusive field mounted instrument for online determination of sand production in oil, gas or multiphase flows. The Portable Version offered provides additional flexibility for well testing and other applications where it is a benefit to move the monitor to different locations in the field. Features & Benefits

10 Non-intrusive sand monitoring with acoustic technology. Onsite decision to manage your system with Maximum Sand Free Rate or Maximum Allowable Sand Rate. Improve production processes to prevent pipelines or separators filling with sand. Intrusive Type (In-Line Probes) An integrated service for detection and quantification of erosion & solids production Technique based on proven electrical resistance (ER) method (no field calibration required) High sensitivity Erosion Probe (not subject to noises; mech., elect., or flow induced) Field instruments - on-line surface monitoring systems MultiTrend software gives erosion and sand quantification

11 Light Weight & Compact Well Test Package The objective of Light weight, Modular & Compact packages is to enable customer to perform well unloading / clean up/metering/calibration operations without drilling rig intervention, i.e. Rigless which contributes to customer cost saving initiative. The design of this well test package is to enable the system to be deployed on remote platforms with limited crane capacity. However in the event of customer platform crane operational constraint, the system also can be deployed by utilising a self erect / self lift mobile crane as a contingency. Light Weight Package is simple to assemble onsite and it is designed to be mobile. The package is capable to perform Rigless operation for; Well Unloading Well Clean Up Production Testing Platform Meter Calibration On Site Sampling & Analysis Services inclusive of representative PVT Sampling

12 MPFM Well Testing Package MPFM is a non-intrusive multiphase flow measurements device that provides real-time and continuous three-phase measurements 1. Fraction and velocity of oil Oil Rate 2. Fraction and velocity of water Water Rate 3. Fraction and velocity of gas Gas Rate

13 SEISMIC SERVICES Marine Seismic Data Acquisition **To be updated. Land Seismic Data Acquisition We are a leading provider of survey design, planning and seismic data acquisition services all of seismic data environments, including land, marine and transition zone. We provide geophysicists with the proper tools to effectively design, model, plan and execute even the most complex seismic surveys. Pre Operational To achieve successful execution of the project, we will prepare all project purposes such as mobilization of required equipment, assemble of expertise team, set up of base camp and prepare the necessary labor. Operational 1. Survey Operation Line Clearing and Bridging We shall be responsible for having the line cleared to ground level all bush and undergrowth exception the swamp, high ground shall be built the step and properly bridge.

14 Source and Receiver location All source and receiver locations, including offsets, and revisions in over lapping zone on block boundary, are to be surveyed. Azimuth Control Azimuth control will be taken at the beginning and end of each line. At least one azimuth check will be taken daily for every line. GPS QC Checks We shall conduct all of the following QC checks on GPS system. Bench Mark GPS contained three dimensional coordinates geodetic and projection to be used for reference point to all of seismic lines survey. 2. Drilling Operation We will provide sufficient of shot hole drilling equipment to maintain an adequate depth for recording. Based on scouting reports, we could anticipate of the drilling system, using flushing or Power Rig or Compressor system. 3. Energy Source We will ensure that all procedures for transport, handle and storage of the explosive comply with the latest version of the safety manual for Geophysical Operation in Malaysia. Principle shall insure hole depths and location are exact. Securing the Explosive Down the Hole We shall use masking tape to secure the explosive prior loading the explosive down the hole. This shall prevent the explosive from water intrusion and partial shot. 4. Recording Operation Our recording system shall meet the following minimum requirements; - Performance specifications and QC checks and tests. - The equipment shall be calibrated and shall meet all manufacturer's specifications. - Polarity shall be in according with SEG convention. - Before Work may begin on assignment, we shall prove seismic data channels meet the performance specifications. Instrument test shall

15 be performed in accordance with manufacturer's recommendation procedures. Monthly Instrument Test and daily test shall be performed and recorded on the production tape. - Geophone Testing Prior to Initiation of Project - All geophones shall meet the manufacture's published performance specification of natural frequency, dumping, sensitivity and distortion. Principle shall inspect all string for wiring defect and proper construction and test for leakage and proper polarity before crew may begin operations. 5. Quality Assurance, Quality Control and Field Processing QC was made with the objective to guarantee the quality of the data. We use standards and manual of procedure for the control of quality of the data and processing data. The procedures guarantee the right parameters in records and processing flow, on record the QC was made according to the client request and IMC format. Previous for the data seismic processing sequence, is made the steps test for the quality control and following the processing sequence which has established. 6. Final Reports The Final Report shall split into 3 (three) main reports: Operation Report, GPS Control Point Report and Surveying Report. The Report will contain all pertinent operating statistics; all general survey information, maps and control points, a summary of all equipment used; and details on all methods of technical and support operations.

16 Seismic Data Processing/Reprocessing Seismic Data Processing Our data processing center operated by sophisticated software technology to process seismic data and have the capability of 2D and 3D data processing thoroughly. Some modules proprietary has been added to the Promax system to improve functionality. Our data processing land, transition and marine. Our cutting-edge technical capabilities include the Surface Related Multiple Elimination (SRME) and Pre-Stack Time Migration (PSTM). Linux cluster processing. Domain migration depth (Depth Migration) A series of modeling depth velocity and the migration is complete including methods Kichhoff, CRAM, RTM, Phase Shift, tomography, ES360 Reservoir Analysis Integrated Seismic Data processing, advanced imaging and AVO analysis. A series of sophisticated software, unique workflow that is suitable for geological conditions in Indonesia. The staff were very competent and experienced. Multi-Client Projects In partnership with the PND, our partner has produced a data library in Indonesia. Allows quick access to models of regional basin. Data Transcription Solve problems with your old data, get the value of the old data, the safe handling and writing bad media. Database and archiving services for the catalog and on-line availability of geological data and geophysical your company. We produces QUALITY outstanding on SERVICES to provide to our clients with VALUE good. Our policy on quality control, health and safety, employment and environment are reviewed periodically to ensure they are in accordance with the practical and international standards.

17 COMPANY STRUCTURE

18 COPY OF PETRONAS LICENSE