Mobile Storage. Commercial and GSA Price Book and Specification Guide. Version Section 3 Effective January 1, Rev.

Transcription

1 Mobile Storage Commercial and GSA Price Book and Specification Guide Version Section 3 Effective January 1, 2015 Rev

2

3 Commercial Terms & Conditions Payment Terms: Deposits are required for all 1st time orders and until credit has been established. Datum s standard terms are NET 30, and Datum does offer prompt pay discounts. All invoices and payments in U.S. dollars. Pricing: All prices shown are F.O.B. Emigsville, PA and are subject to change without notice. See separate contract for GSA pricing, terms and conditions. Minimum Order: $100 (net). Any order less than $100 net will be subject to a $25.00 net service charge. Shipping: All orders are shipped best way, prepaid and add, unless otherwise noted. Inside delivery, liftgate, 2-man delivery and call-before delivery are available for an additional charge. Please consult factory for additional pricing information. Ordering Instructions: All orders must be in writing and accompanied by a purchase order number. Quantities, part numbers, paint, and laminate colors must be clearly noted on order. All orders will be confirmed with a written acknowledgment. MobileTrak orders must have signed layout approval for order placement. Changes to orders: Once an order has entered the production schedule, any changes to that order will be subject to a 25% restocking fee and extended lead time. Design Service: Datum Storage Solutions offers complete layout-planning services at $75.00 per hour. Standard Paint Colors: Products are available in 8 standard paint colors, unless otherwise noted. Other colors may be subjected to an extended lead-time; please consult factory for more information. Datum s state-of-the-art electrostatic powder coat has the capability to paint virtually any color. Minimum upcharge: $ NET. Please contact the factory for more information. Datum will only accept returns according to the Cancellation & Returns Policy on the following paint finishes: T15, T47 and T86. Design Ownership: All designs, plans, layouts, drawings, and specifications are the property of Datum Storage Solutions and may not be used, reproduced or distributed, in whole or part, without prior written consent. Freight Charges: All shipments will be pre-pay and add unless otherwise specified. Freight charges will be added to the invoice or billed separately, depending on arrangements. Selection of the delivering carrier will be made by Datum Storage Solutions. All freight charges, except carrier's minimums, non-direct and intrastate, will be discounted. Datum Storage Solutions participates in various discount programs with carriers. Any remaining discount amounts not credited to the buyer are used to offset handling, processing, packaging, and related administrative expenses. Buyer has the option of selecting their own carrier, F.O.B. Shipping Point. If this option is selected, shipment must go Freight Collect or third party, and Datum Storage Solutions' responsibilities end when the order leaves our dock. A per-package handling charge of $10.00 may be added for UPS and FedEx shipments. Datum Storage Solutions is not responsible for brokerage, customs, warehousing or any other fees associated with international shipments. Weight: Weights shown are approximate and do not include dunnage. Freight Claims: Datum takes the utmost care when packing our product to prevent shipping damage. It is your responsibility to note on the freight carrier s delivery receipt any damage incurred while in transit. All damage claims must be submitted by you with the carrier. Concealed damage must be reported to Datum and/or the freight carrier in less than 15 days from the receipt of shipment. If concealed damage is reported in less than 15 days, the carrier and Datum will absorb two third's of the net product cost, the balance of the cost for the replacement product will be billed to the dealer under the original purchase order number. All damage claims must be submitted by you with the carrier. All concealed damage claims reported after the 15-day time limit become the responsibility of the dealer. All concealed damage claims must be submitted by you with the carrier. All product that is delivered to a warehouse or an installation facility must be inspected prior to delivering to end destination. If damage is reported after the product is moved, the dealer is responsible for filing the claim with the carrier. If damage is found prior to moving the product, after being signed clear, it must be reported in less than 15 days from delivery. Concealed damage incurred by a third party carrier is not the responsibility of Datum Storage Solutions. Note: Crating your product may reduce damage. Datum offers crating for a charge of $75.00 per skid. Please contact the factory for details. CAUTION: When you give a delivering carrier a clear receipt for a shipment in which there is damaged merchandise or a shortage, the carrier is relieved of further responsibility. DAMAGE AND SHORTAGE CLAIMS MUST BE FILED BY YOU WITH THE DELIVERING CARRIER. Datum Storage Solutions will not accept return merchandise damaged in transit. Your claim is with the delivering carrier. Terms

4 Commercial Terms & Conditions, Continued Cancellations & Returns: ORDERS FOR "SPECIAL" OR "CUSTOM" ITEMS ARE NOT SUBJECT TO CHANGE OR CANCELLATION. No returned merchandise will be accepted without written consent of Datum Storage Solutions. All returned shipments are to be freight prepaid by the shipper and are subject to a handling charge of 25% plus reimbursement of all original transportation charges incurred by Datum Storage Solutions. Once production of "non-stock" items has begun, cancellation of the order is subject to Datum Storage Solutions' approval and a 25% surcharge will be assessed on all approved cancellation items. Custom colors or laminate panels are not returnable. Return authorization must be requested within 30 days of invoicing and no product may be returned without a prior written return authorization. All returns must be made within 30 days of receiving the written return authorization and are subject to a 25% restocking charge ($20.00 minimum) plus all incurred freight charges. All returns must be in original packaging and in resellable condition for a credit to be issued. Datum will not issue return authorizations on product that has been assembled by the dealer or the end user. NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller must have the right to inspect any goods claimed to be defective at Buyer's place of business or require Buyer to return the goods to the Seller for inspection on Seller's premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective. Storage: Datum does not have the facilities to store completed orders, therefore all orders must ship when completed. If a postponement of product shipment is requested by the Dealer after the ordered goods are released to manufacturing or at a time when Datum is ready to ship the ordered goods, Datum may transfer the ordered goods to storage at the Dealer's risk and expense. This transfer to storage will be considered delivery to the Dealer for all purposes including invoicing and payment. Replacements: Replacement requests for damaged or missing parts must be submitted to Datum within 30 days of receipt of product. Damaged product must be signed for, damaged or refused, and reported within 30 days of receipt of product. Replacement requests made after 30 days of receipt of order will be sent out at dealer cost plus freight. Lifetime Warranty:* Datum Storage Solutions warrants to the original purchaser for the life of the product that it shall be free of any defect in materials or workmanship, so long as the original purchaser is the owner and possessor of the product and the product is installed by a Datum Certified Installer. For a period of two years from the date of shipment, Datum Storage Solutions will provide all labor free of charge at the location of the product to repair or replace any part that fails because of such defects. After two years from date of shipment, labor will no longer be provided. All replacements parts will be supplied for the life of the product so long as all requirements are met as set forth in this warranty. This warranty does not include defects to the product resulting from accident, misuse, improper installation or operation, normal wear, neglect, unauthorized repair or alteration. The purchase of this product shall constitute a purchaser s agreement that the sole remedy for any breach of warranty shall be such repair or replacement as expressly provided above. In no event shall Datum Storage Solutions be liable for any incidental or consequential damages arising out of the use or inability to use the product for any purpose whatsoever. Effective January 1, ANY PRODUCT NOT INSTALLED BY A DATUM CERTIFIED INSTALLER WILL RECEIVE A ONE-YEAR PARTS WARRANTY. Contact Datum Storage Solutions for a Datum Certified Installer in your area. *Lifetime Warranty excludes all tambour doors and all electrical components, which carry a two-year warranty. Excludes all sales outside of the contiguous 48 states, Canada and Mexico. Terms

5 Filing & Storage General Service Administration Terms & Conditions Authorized Federal Supply Schedule Datum Filing Systems, Inc. / dba Datum Storage Solutions Contract GS-28F-005BA Supply Schedule FSC Group 71, Part 1 Office Furniture Contract Period: November 5, 2013 through November 4, 2018 Datum Storage Solutions Cage Number 0A9H7 Datum Storage Solutions DUNS # Datum Storage Solutions Federal ID Number Datum is a Small Business and registered in S.A.M. Datum Storage Solutions is on GSA Advantage. To purchase Datum products on GSA go to: Special Item Numbers: SIN Computer Furniture (Technical Furniture) SIN Filing & Storage Shelving (Ez2 Rotary Action File, 4Post Shelving and Computer Security) SIN High-Density, Movable Filing Systems (ThinStak, TrakSlider and MobileTrak ) Contact Datum for discounting. SIN Design Services (if used, $75.00/Hour) SIN Installation-related Services Maximum Order: $500, Net Minimum Order: $ Net Geographic Coverage: Worldwide Point of Production: Emigsville, PA Discount from List Price: 57.9% $ $74, % $75,000 $500, Prompt Payment Discount Terms: ½% 20 Days, Net 30 Days Government Purchase Cards are accepted. Foreign Items: None Delivery: Days ARO, expedited and overnight delivery not on contract. Shipping Terms: F.O.B. Origin, Freight Prepay and Add. Contact Datum for freight quotes. ORDERING & PAYMENT ADDRESS: Datum Filing Systems, Inc. dba/ Datum Storage Solutions Phone: Church Road Fax: P.O. Box Emigsville, PA gsa@datumstorage.com Datum Filing & Storage products on GSA contract are denoted with a single asterisk in the Table of Contents. Additionally, all Datum products in this Price Book are on GSA unless noted with a NOT ON GSA banner across the page or an asterisk after the item number and corresponding asterisk with Item is not available in GSA contract. Pages containing product on GSA will have a GSA logo on the bottom outside corner of the page. Terms

6 Filing & Storage, Continued General Service Administration Terms & Conditions Authorized Federal Supply Schedule Warranty Information: Datum Storage Solutions warrants to the original purchaser for the life of the product that it shall be free of any defect in materials or workmanship, so long as the original purchaser is the owner and possessor of the product and the product is installed by a Datum Certified Installer. For a period of two years from the date of shipment, Datum Storage Solutions will provide all labor free of charge at the location of the product to repair or replace any part that fails because of such defects. After two years from date of shipment, labor will no longer be provided. All replacements parts will be supplied for the life of the product so long as all requirements are met as set forth in this warranty. This warranty does not include defects to the product resulting from accident, misuse, improper installation or operation, normal wear, neglect, unauthorized repair or alteration. The purchase of this product shall constitute a purchaser s agreement that the sole remedy for any breach of warranty shall be such repair or replacement as expressly provided above. In no event shall Datum Storage Solutions be liable for any incidental or consequential damages arising out of the use or inability to use the product for any purpose whatsoever. Effective January 1, Export Packaging: Not included in contract Datum accepts government purchase cards. Rental, Maintenance and Repair: Not Applicable Terms of Installation Service: For orders with a NET value of $ or less, the install price is $ Installation charges for orders with a NET value over $ will need to be negotiated between the Datum dealer and the customer Cancellation Policy: Cancellation must be submitted in writing and approved by Datum Storage Solutions. No charge prior to production. After production has begun only actual cost incurred will be billed to the government that cannot be recovered through resale in six months. Return/Restocking Policy: Datum Storage Solutions will accept the return of non-custom merchandise after shipment with prior authorization from Datum. Request must be submitted within 30 days of receipt of product. Product must be returned to Datum in resellable condition within 30 days after getting authorization from Datum. Returns will be subject to a 20% restocking charge, plus freight. Datum Filing & Storage products on GSA contract are denoted with a single asterisk in the Table of Contents. Additionally, all Datum products in this Price Book are on GSA unless noted with a NOT ON GSA banner across the page or an asterisk after the item number and corresponding asterisk with Item is not available in GSA contract. Pages containing product on GSA will have a GSA logo on the bottom outside corner of the page. Terms

7 MobileTrak & ArtStor Systems MobileTrak ArtStor For more information about specifications and pricing, please contact the factory.

8 TrakSlider General Information & Specifications GENERAL INFORMATION Product Description: The Datum TrakSlider mobile system is designed to increase storage capacity in a minimal amount of floor space while still retaining a high degree of accessibility. Our unique design enables more than half the system to be accessible at any time. All Datum systems are designed to eliminate the need for access aisles between shelves. By eliminating fixed aisles between shelves, retrieval time is reduced and user efficiency is increased. All Datum systems are designed to accept a variety of media storage requirements. All systems are modular in design and can be reconfigured and added onto at any time without the need to disassemble, relocate, or remove existing files. All Datum TrakSlider mobile systems consist of modular, all-welded steel frame and rail assemblies, flush decking, single or multiple row(s) of lateral rolling carriages, and overhead stabilizer & roller assemblies. All systems can be configured as a Bi, Tri, and/or QuadSlider System. All TrakSlider carriages include four wheels that ride on a double rail track for an added measure of stability and safety. SPECIFICATIONS Material and Workmanship: All Datum mobile systems are manufactured from high quality, cold rolled steel, free of scale or rust. Exposed corners, and surface areas are free of any sharp edges. All rails, stabilizer and carriage assemblies are joined together using state-of-the-art welding technologies. Tracks: Each modular track assembly will consist of two 14 gauge formed steel rails. The rail assembly will be welded to a minimum of 4 corresponding 14 gauge steel support channels. Track assemblies are easily leveled by adjusting built-in leveling glides found in the support channel located every 12 inches on center. End stops are installed at each end of the rail assembly to provide a safe, cushioned stop for the mobile carriage. All track assemblies include a stainless steel decorative cap. This cap will be attached to the front of the track assembly giving it a finished profile. Decking: Decking will be manufactured of 16 gauge formed steel, coated with a non skid textured finish. Deck panels will be installed between each rail creating a smooth unobstructed finish. Top Stabilizers: Top stabilizers consist of a single or double 18 gauge steel formed channel attached to the stationary rack, and a 14 gauge steel bracket with two 1-3/8" nylon faced ball bearing rollers attached to the top of each mobile rack. The bearing assembly will be adjustable to compensate for any irregularities in the floor. Carriages: Carriages consist of sections of "U" shaped formed cold rolled steel 13 gauge and 14 gauge stringers and cross members, all electrically welded to form a strong and durable frame. Wheels: Carriage wheels will be 2-3/16" in diameter and made of Delrin. Each wheel will have (1) 1-7/8" diameter heavy-duty, double sealed, permanently lubricated ball bearing. There are a total of four wheel assemblies per carriage. Finish: All steel parts are thoroughly cleaned using a three-stage iron phosphate washer and then coated with an Epoxy-Hybrid powder coat finish using a state-of-the-art electrostatic paint system. Powder coating is more environmentally friendly than liquid paint and provides a durable uniform finish that is scratch and corrosion resistant. Size: TrakSlider Systems are available in three standard configurations (Bi, Tri, and Quad) to fit virtually any storage requirement and room size. Specifying and Ordering: To help select the right application for your needs, Datum offers three different track systems: Preconfigured Assemblies: All Datum track systems are designed to fit virtually any type of shelving. We have also made it easy to order. Simply pick the system to fit your shelving application and room requirements. Again, one part number will include all necessary track and hardware for a complete system. Starter and Add-On Track Assemblies: All track assemblies are available as individual components, which can be mixed and matched in virtually endless configurations for optimum space utilization. All track assemblies can be joined together to create a customized filing system. Please note that when ordering systems as individual components, you will require at least one Starter track assembly. FOR ADDITIONAL INFORMATION ON ORDERING, TERMS AND CONDITIONS, PRICING AND SHIPPING, PLEASE REFER TO TERMS SECTION. Terms 3:2

9 MediFile and TapeTracker Track Assemblies Tiers and Bases are Not Included BiSlider Track Assemblies Item # Media Description Est. Lbs. List Price B4MFS MediFile 24 Starter Track Assembly B4TTS TapeTracker 24 Starter Track Assembly B4MFA MediFile 24 Add-On Track Assembly B4TTA TapeTracker 24 Add-On Track Assembly B0MFS MediFile 30 Starter Track Assembly B0TTS TapeTracker 30 Starter Track Assembly B0MFA MediFile 30 Add-On Track Assembly B0TTA TapeTracker 30 Add-On Track Assembly B6MFS MediFile 36 Starter Track Assembly B6TTS TapeTracker 36 Starter Track Assembly B6MFA MediFile 36 Add-On Track Assembly B6TTA TapeTracker 36 Add-On Track Assembly B2MFS MediFile 42 Starter Track Assembly B2TTS TapeTracker 42 Starter Track Assembly B2MFA MediFile 42 Add-On Track Assembly B2TTA TapeTracker 42 Add-On Track Assembly B8MFS MediFile 48 Starter Track Assembly B8TTS TapeTracker 48 Starter Track Assembly B8MFA MediFile 48 Add-On Track Assembly B8TTA TapeTracker 48 Add-On Track Assembly Overall depth of BiSlider System with MediFile tiers is 19-1/2" Overall depth of BiSlider System with TapeTracker tiers is 11-1/2" TriSlider Track Assemblies Item # Media Description Est. Lbs. List Price T4MFS MediFile 24 Starter Track Assembly T4TTS TapeTracker 24 Starter Track Assembly T4MFA MediFile 24 Add-On Track Assembly 32 1, T4TTA TapeTracker 24 Add-On Track Assembly 31 1, T0MFS MediFile 30 Starter Track Assembly T0TTS TapeTracker 30 Starter Track Assembly T0MFA MediFile 30 Add-On Track Assembly 40 1, T0TTA TapeTracker 30 Add-On Track Assembly 39 1, T6MFS MediFile 36 Starter Track Assembly T6TTS TapeTracker 36 Starter Track Assembly T6MFA MediFile 36 Add-On Track Assembly 48 1, T6TTA TapeTracker 36 Add-On Track Assembly 46 1, T2MFS MediFile 42 Starter Track Assembly T2TTS TapeTracker 42 Starter Track Assembly T2MFA MediFile 42 Add-On Track Assembly 56 1, T2TTA TapeTracker 42 Add-On Track Assembly 54 1, T8MFS MediFile 48 Starter Track Assembly T8TTS TapeTracker 48 Starter Track Assembly T8MFA MediFile 48 Add-On Track Assembly 64 1, T8TTA TapeTracker 48 Add-On Track Assembly 62 1, Overall depth of TriSlider System with MediFile tiers is 30-1/4" Overall depth of TriSlider System with TapeTracker tiers is 18-1/4" * All Starter track assemblies include track and hardware only. All Add-On track assemblies include track, hardware, and one mobile carriage for BiSlider and two mobile carriages for TriSlider. Each stationary and mobile section requires one top and base set. Terms 3:3

10 Conversion Kits (Tiers and Bases are Not Included) 36" Conversion - To Convert a BiSlider to a TriSlider Item # Media Existing BiSlider Convert to a TriSlider Est. Lbs. List Price C621LT Letter C621LG Legal C621XR X-Ray C632LT Letter , C632LG Legal , C632XR X-Ray , C643LT Letter , C643LG Legal , C643XR X-Ray , C654LT Letter , C654LG Legal , C654XR X-Ray , C665LT Letter , C665LG Legal , C665XR X-Ray , C676LT Letter , C676LG Legal , C676XR X-Ray , " Conversion - To Convert a BiSlider to a TriSlider Item # Media Existing BiSlider Convert to a TriSlider Est. Lbs. List Price C221LT Letter C221LG Legal , C221XR X-Ray , C232LT Letter , C232LG Legal , C232XR X-Ray , C243LT Letter , C243LG Legal , C243XR X-Ray , C254LT Letter , C254LG Legal , C254XR X-Ray , C265LT Letter , C265LG Legal , C265XR X-Ray , C276LT Letter , C276LG Legal , C276XR X-Ray , " Conversion - To Convert a BiSlider to a TriSlider Item # Media Existing BiSlider Convert to a TriSlider Est. Lbs. List Price C821LT Letter , C821LG Legal , C821XR X-Ray , C832LT Letter , C832LG Legal , C832XR X-Ray , C843LT Letter , C843LG Legal , C843XR X-Ray , C854LT Letter , C854LG Legal , C854XR X-Ray , C865LT Letter , C865LG Legal , C865XR X-Ray , C876LT Letter , C876LG Legal , C876XR X-Ray , Terms 3:4

11 Preconfigured Track Assemblies (Tiers and Bases are Not Included) 36" BiSlider Preconfigured Track Assemblies The BiSlider Track Assembly can be ordered for a wide variety of shelving applications. When using Datum ThinStak a 2" leveling base is required. Conversion plates are not included in price. See below for correct media size. IMPORTANT! Shelving, brand, type and size must be specified on order. Item # Media Rear Section Front Section D W Est. Lbs. List Price B621LT Letter / B621LG Legal / , B621XR X-Ray / , B632LT Letter / , B632LG Legal / , B632XR X-Ray / , B643LT Letter / , B643LG Legal / , B643XR X-Ray / , B654LT Letter / , B654LG Legal / , B654XR X-Ray / , B665LT Letter / , B665LG Legal / , B665XR X-Ray / , B676LT Letter / , B676LG Legal / , B676XR X-Ray / , " TriSlider Preconfigured Track Assemblies The TriSlider Track Assembly can be ordered for a wide variety of shelving applications. When using Datum ThinStak a 2" leveling base is required. Conversion plates are not included in price. See below for correct media size. IMPORTANT! Shelving, brand, type and size must be specified on order. Item # Media Rear Section Middle Section Front Section D W Est. Lbs. List Price T621LT Letter , T621LG Legal , T621XR X-Ray , T632LT Letter , T632LG Legal , T632XR X-Ray , T643LT Letter , T643LG Legal , T643XR X-Ray , T654LT Letter , T654LG Legal , T654XR X-Ray , T665LT Letter , T665LG Legal , T665XR X-Ray , T676LT Letter , T676LG Legal , T676XR X-Ray , Conversion Plates When ordering shelving other than Datum ThinStak, Conversion plates for each movable carriage are required. EXAMPLE: B676LG requires (6) CP15 Item # Media Est. Lbs. List Price CP12 Letter CP15 Legal CP18 X-Ray * Media Size: Letter 12" up to 13-3/16" deep Legal 15" up to 16-3/16" deep X-Ray 18" up to 19-3/16" deep **Includes 2" of carriage overtravel on each side of system. Dimension is for Track Assembly only. You must include depth of stationary tier to achieve overall depth of system. Example: B621LT, 12" deep stationary tier /2" deep track assembly = 26-1/2" overall depth. Terms 3:5

12 Preconfigured Track Assemblies (Tiers and Bases are Not Included) 42" BiSlider Preconfigured Track Assemblies The BiSlider Track Assembly can be ordered for a wide variety of shelving applications. When using Datum ThinStak a 2" leveling base is required. Conversion plates are not included in price. See below for correct media size. IMPORTANT! Shelving, brand, type and size must be specified on order. Item # Media Rear Section Front Section D W Est. Lbs. List Price B221LT Letter / , B221LG Legal / , B221XR X-Ray / , B232LT Letter / , B232LG Legal / , B232XR X-Ray / , B243LT Letter / , B243LG Legal / , B243XR X-Ray / , B254LT Letter / , B254LG Legal / , B254XR X-Ray / , B265LT Letter / , B265LG Legal / , B265XR X-Ray / , B276LT Letter / , B276LG Legal / , B276XR X-Ray / , " TriSlider Preconfigured Track Assemblies The TriSlider Track Assembly can be ordered for a wide variety of shelving applications. When using Datum ThinStak a 2" leveling base is required. Conversion plates are not included in price. See below for correct media size. IMPORTANT! Shelving, brand, type and size must be specified on order. Item # Media Rear Section Middle Section Front Section D W Est. Lbs. List Price T221LT Letter , T221LG Legal , T221XR X-Ray , T232LT Letter , T232LG Legal , T232XR X-Ray , T243LT Letter , T243LG Legal , T243XR X-Ray , T254LT Letter , T254LG Legal , T254XR X-Ray , T265LT Letter , T265LG Legal , T265XR X-Ray , T276LT Letter , T276LG Legal , T276XR X-Ray ,047 10, Conversion Plates When ordering shelving other than Datum ThinStak, Conversion plates for each movable carriage are required. EXAMPLE: B276LG requires (6) CP15 Item # Media Est. Lbs. List Price CP12 Letter CP15 Legal CP18 X-Ray * Media Size: Letter 12" up to 13-3/16" deep Legal 15" up to 16-3/16" deep X-Ray 18" up to 19-3/16" deep **Includes 2" of carriage overtravel on each side of system. Dimension is for Track Assembly only. You must include depth of stationary tier to achieve overall depth of system. Example: B221LT, 12" deep stationary tier /2" deep track assembly = 26-1/2" overall depth. Terms 3:6

13 Preconfigured Track Assemblies (Tiers and Bases are Not Included) 48" BiSlider Preconfigured Track Assemblies The BiSlider Track Assembly can be ordered for a wide variety of shelving applications. When using Datum ThinStak a 2" leveling base is required. Conversion plates are not included in price. See below for correct media size. IMPORTANT! Shelving, brand, type and size must be specified on order. Item # Media Rear Section Front Section D W Est. Lbs. List Price B821LT Letter / , B821LG Legal / , B821XR X-Ray / , B832LT Letter / , B832LG Legal / , B832XR X-Ray / , B843LT Letter / , B843LG Legal / , B843XR X-Ray / , B854LT Letter / , B854LG Legal / , B854XR X-Ray / , B865LT Letter / , B865LG Legal / , B865XR X-Ray / , B876LT Letter / , B876LG Legal / , B876XR X-Ray / , " TriSlider Preconfigured Track Assemblies The TriSlider Track Assembly can be ordered for a wide variety of shelving applications. When using Datum ThinStak a 2" leveling base is required. Conversion plates are not included in price. See below for correct media size. IMPORTANT! Shelving, brand, type and size must be specified on order. Item # Media Rear Section Middle Section Front Section D W Est. Lbs. List Price T821LT Letter , T821LG Legal , T821XR X-Ray , T832LT Letter , T832LG Legal , T832XR X-Ray , T843LT Letter , T843LG Legal , T843XR X-Ray , T854LT Letter , T854LG Legal , T854XR X-Ray , T865LT Letter , T865LG Legal , T865XR X-Ray , T876LT Letter ,016 9, T876LG Legal ,059 9, T876XR X-Ray ,120 9, Conversion Plates When ordering shelving other than Datum Stackable, Conversion plates for each movable carriage are required. EXAMPLE: B876LG requires (6) CP15 Item # Media Est. Lbs. List Price CP12 Letter CP15 Legal CP18 X-Ray * Media Size: Letter 12" up to 13-3/16" deep Legal 15" up to 16-3/16" deep X-Ray 18" up to 19-3/16" deep **Includes 2" of carriage overtravel on each side of system. Dimension is for Track Assembly only. You must include depth of stationary tier to achieve overall depth of system. Example: B821LT, 12" deep stationary tier /2" deep track assembly = 26-1/2" overall depth. Terms 3:7

14 BiSlider/TriSlider/QuadSlider Starter & Add-On Track Assemblies Tiers and Bases are Not Included 24" TRAKSLIDERS QuadSlider TriSlider BiSlider Item # Media Description Est. Lbs. List Price B4LTS Letter 24 Starter Track Assembly B4LGS Legal 24 Starter Track Assembly B4XRS X-Ray 24 Starter Track Assembly B4LTA Letter 24 Add-On Track Assembly B4LGA Legal 24 Add-On Track Assembly B4XRA X-Ray 24 Add-On Track Assembly T4LTS Letter 24 Starter Track Assembly T4LGS Legal 24 Starter Track Assembly T4XRS X-Ray 24 Starter Track Assembly T4LTA Letter 24 Add-On Track Assembly 89 1, T4LGA Legal 24 Add-On Track Assembly 93 1, T4XRA X-Ray 24 Add-On Track Assembly 102 1, Q4LTS Letter 24 Starter Track Assembly Q4LGS Legal 24 Starter Track Assembly 71 1, Q4LTA Letter 24 Add-On Track Assembly 141 2, Q4LGA Legal 24 Add-On Track Assembly 146 2, " TRAKSLIDERS QuadSlider TriSlider BiSlider B0LTS Letter 30 Starter Track Assembly B0LGS Legal 30 Starter Track Assembly B0XRS X-Ray 30 Starter Track Assembly B0LTA Letter 30 Add-On Track Assembly B0LGA Legal 30 Add-On Track Assembly B0XRA X-Ray 30 Add-On Track Assembly T0LTS Letter 30 Starter Track Assembly T0LGS Legal 30 Starter Track Assembly T0XRS X-Ray 30 Starter Track Assembly T0LTA Letter 30 Add-On Track Assembly 111 1, T0LGA Legal 30 Add-On Track Assembly 116 1, T0XRA X-Ray 30 Add-On Track Assembly 127 1, Q0LTS Letter 30 Starter Track Assembly 84 1, Q0LGS Legal 30 Starter Track Assembly 88 1, Q0LTA Letter 30 Add-On Track Assembly 175 2, Q0LGA Legal 30 Add-On Track Assembly 182 2, " TRAKSLIDERS QuadSlider TriSlider BiSlider B6LTS Letter 36 Starter Track Assembly B6LGS Legal 36 Starter Track Assembly B6XRS X-Ray 36 Starter Track Assembly B6LTA Letter 36 Add-On Track Assembly B6LGA Legal 36 Add-On Track Assembly B6XRA X-Ray 36 Add-On Track Assembly T6LTS Letter 36 Starter Track Assembly T6LGS Legal 36 Starter Track Assembly T6XRS X-Ray 36 Starter Track Assembly T6LTA Letter 36 Add-On Track Assembly 132 1, T6LGA Legal 36 Add-On Track Assembly 138 1, T6XRA X-Ray 36 Add-On Track Assembly 151 1, Q6LTS Letter 36 Starter Track Assembly 100 1, Q6LGS Legal 36 Starter Track Assembly 105 1, Q6LTA Letter 36 Add-On Track Assembly 209 2, Q6LGA Legal 36 Add-On Track Assembly 217 2, * Media Size: Letter 12" up to 13-3/16" deep Legal 15" up to 16-3/16" deep X-Ray 18" up to 19-3/16" deep. ** All starter track assemblies include track, and hardware only. All add-on track assemblies include track, hardware, and one mobile carriage for BiSlider and two mobile carriages for TriSlider, and three mobile carriages for QuadSlider. Terms 3:8

15 BiSlider/TriSlider/QuadSlider Starter & Add-On Track Assemblies Tiers and Bases are Not Included 42" TRAKSLIDERS QuadSlider TriSlider BiSlider Item # Media Description Est. Lbs. List Price B2LTS Letter 42 Starter Track Assembly B2LGS Legal 42 Starter Track Assembly B2XRS X-Ray 42 Starter Track Assembly B2LTA Letter 42 Add-On Track Assembly B2LGA Legal 42 Add-On Track Assembly B2XRA X-Ray 42 Add-On Track Assembly T2LTS Letter 42 Starter Track Assembly T2LGS Legal 42 Starter Track Assembly T2XRS X-Ray 42 Starter Track Assembly T2LTA Letter 42 Add-On Track Assembly 144 1, T2LGA Legal 42 Add-On Track Assembly 150 1, T2XRA X-Ray 42 Add-On Track Assembly 159 1, Q2LTS Letter 42 Starter Track Assembly 107 1, Q2LGS Legal 42 Starter Track Assembly 115 1, Q2LTA Letter 42 Add-On Track Assembly 223 2, Q2LGA Legal 42 Add-On Track Assembly 234 2, " TRAKSLIDERS QuadSlider TriSlider BiSlider B8LTS Letter 48 Starter Track Assembly B8LGS Legal 48 Starter Track Assembly B8XRS X-Ray 48 Starter Track Assembly B8LTA Letter 48 Add-On Track Assembly B8LGA Legal 48 Add-On Track Assembly B8XRA X-Ray 48 Add-On Track Assembly T8LTS Letter 48 Starter Track Assembly T8LGS Legal 48 Starter Track Assembly T8XRS X-Ray 48 Starter Track Assembly T8LTA Letter 48 Add-On Track Assembly 156 1, T8LGA Legal 48 Add-On Track Assembly 162 1, T8XRA X-Ray 48 Add-On Track Assembly 167 1, Q8LTS Letter 48 Starter Track Assembly 114 1, Q8LGS Legal 48 Starter Track Assembly 124 1, Q8LTA Letter 48 Add-On Track Assembly 237 2, Q8LGA Legal 48 Add-On Track Assembly 150 2, * Media Size: Letter 12" up to 13-3/16" deep Legal 15" up to 16-3/16" deep X-Ray 18" up to 19-3/16" deep. ** All starter track assemblies include track, and hardware only. All add-on track assemblies include track, hardware, and one mobile carriage for BiSlider and two mobile carriages for TriSlider, and three mobile carriages for QuadSlider. Terms 3:9

16 Carriage Components (Tiers and Bases are Not Included) All carriage assemblies come complete with overhead anti-tip and all necessary attachment hardware. Conversion plates, tiers and bases are not included. BiSlider Carriages Item # Media Description Est. Lbs. List Price CB4LT Letter 24 Carriage Assembly CB4LG Legal 24 Carriage Assembly CB4XR X-Ray 24 Carriage Assembly CB0LT Letter 30 Carriage Assembly CB0LG Legal 30 Carriage Assembly CB0XR X-Ray 30 Carriage Assembly CB6LT Letter 36 Carriage Assembly CB6LG Legal 36 Carriage Assembly CB6XR X-Ray 36 Carriage Assembly CB2LT Letter 42 Carriage Assembly CB2LG Legal 42 Carriage Assembly CB2XR X-Ray 42 Carriage Assembly CB8LT Letter 48 Carriage Assembly CB8LG Legal 48 Carriage Assembly CB8XR X-Ray 48 Carriage Assembly TriSlider Carriages Item # Media Description Est. Lbs. List Price CT4LT Letter 24 Carriage Assembly CT4LG Legal 24 Carriage Assembly CT4XR X-Ray 24 Carriage Assembly CT0LT Letter 30 Carriage Assembly CT0LG Legal 30 Carriage Assembly CT0XR X-Ray 30 Carriage Assembly CT6LT Letter 36 Carriage Assembly CT6LG Legal 36 Carriage Assembly CT6XR X-Ray 36 Carriage Assembly CT2LT Letter 42 Carriage Assembly CT2LG Legal 42 Carriage Assembly CT2XR X-Ray 42 Carriage Assembly CT8LT Letter 48 Carriage Assembly CT8LG Legal 48 Carriage Assembly CT8XR X-Ray 48 Carriage Assembly QuadSlider Carriages Item # Media Description Est. Lbs. List Price CQ4LT Letter 24 Carriage Assembly CQ4LG Legal 24 Carriage Assembly CQ0LT Letter 30 Carriage Assembly CQ0LG Legal 30 Carriage Assembly CQ6LT Letter 36 Carriage Assembly CQ6LG Legal 36 Carriage Assembly CQ2LT Letter 42 Carriage Assembly CQ2LG Legal 42 Carriage Assembly CQ8LT Letter 48 Carriage Assembly CQ8LG Legal 48 Carriage Assembly Terms 3:10

17 Lower Anti-tip Bi-slider Item# Description Weight List Price B4LTS-LAT 24 BI-SLIDER STARTER TRACK ASSEMBLY LETTER B4LGS-LAT 24 BI-SLIDER STARTER TRACK ASSEMBLY LEGAL B4XRS-LAT 24 BI-SLIDER STARTER TRACK ASSEMBLY X-RAY B4LTA-LAT 24 BI-SLIDER ADD-ON TRACK ASSEMBLY LETTER B4LGA-LAT 24 BI-SLIDER ADD-ON TRACK ASSEMBLY LEGAL B4XRA-LAT 24 BI-SLIDER ADD-ON TRACK ASSEMBLY X-RAY B0LTS-LAT 30 BI-SLIDER STARTER TRACK ASSEMBLY LETTER B0LGS-LAT 30 BI-SLIDER STARTER TRACK ASSEMBLY LEGAL B0XRS-LAT 30 BI-SLIDER STARTER TRACK ASSEMBLY X-RAY B0LTA-LAT 30 BI-SLIDER ADD-ON TRACK ASSEMBLY LETTER B0LGA-LAT 30 BI-SLIDER ADD-ON TRACK ASSEMBLY LEGAL B0XRA-LAT 30 BI-SLIDER ADD-ON TRACK ASSEMBLY X-RAY B6LTS-LAT 36 BI-SLIDER STARTER TRACK ASSEMBLY LETTER B6LGS-LAT 36 BI-SLIDER STARTER TRACK ASSEMBLY LEGAL B6XRS-LAT 36 BI-SLIDER STARTER TRACK ASSEMBLY X-RAY B6LTA-LAT 36 BI-SLIDER ADD-ON TRACK ASSEMBLY LETTER B6LGA-LAT 36 BI-SLIDER ADD-ON TRACK ASSEMBLY LEGAL B6XRA-LAT 36 BI-SLIDER ADD-ON TRACK ASSEMBLY X-RAY B2LTS-LAT 42 BI-SLIDER STARTER TRACK ASSEMBLY LETTER B2LGS-LAT 42 BI-SLIDER STARTER TRACK ASSEMBLY LEGAL B2XRS-LAT 42 BI-SLIDER STARTER TRACK ASSEMBLY X-RAY B2LTA-LAT 42 BI-SLIDER ADD-ON TRACK ASSEMBLY LETTER B2LGA-LAT 42 BI-SLIDER ADD-ON TRACK ASSEMBLY LEGAL B2XRA-LAT 42 BI-SLIDER ADD-ON TRACK ASSEMBLY X-RAY B8LTS-LAT 48 BI-SLIDER STARTER TRACK ASSEMBLY LETTER B8LGS-LAT 48 BI-SLIDER STARTER TRACK ASSEMBLY LEGAL B8XRS-LAT 48 BI-SLIDER STARTER TRACK ASSEMBLY X-RAY B8LTA-LAT 48 BI-SLIDER ADD-ON TRACK ASSEMBLY LETTER B8LGA-LAT 48 BI-SLIDER ADD-ON TRACK ASSEMBLY LEGAL B8XRA-LAT 48 BI-SLIDER ADD-ON TRACK ASSEMBLY X-RAY Can be used in conjunction with or along side unit with overhead anti-tip This is not a seismic system Requires tracks to be bolted to floor System can be leveled Lower anti-tip componentry can be added to track and carriages mfg. after 12/1/14 Recommended Maximum height of movable shelving 76.25" tall Sits on floor in front of stationary shelving, does not go under stationary shelving Requires 2.5" clearance in front of stationary (may be higher depending on system leveling) Movable shelving must be securely attached to the carriage in order for the anti-tip to function. Has look similar to standard bi slide decking and carriage Not recommended for units with pull out drawers. Fabricated from 11 and 16 gauge cold rolled steel Powder coated finish Terms 3:11

18 89 Church Road P. O. Box 355 Emigsville, PA Factory: National: FILING-1 Fax: FILING-1 ( )