Thank you for your business and we look forward to seeing you at the show!

Transcription

1 Valley Expo & Displays is pleased to have been selected as the Official Service Contractor for the upcoming Automation Fair 2018, being held at, Pennsylvania Convention Center, November 14-15, Included in this service kit are forms for ordering various services and equipment for your event. Please read each form carefully and return to the address provided on the order form. Refer to the enclosed General Show Information pages for vital facts and information about this event. If you have any additional questions about Valley Expo & Displays services, please do not hesitate to call or Valley at the information provided below. Valley Online Ordering For your convenience Valley Expo & Displays offers online ordering. You can order your Valley services, view show schedule, review previous and current account information, and print invoices. To place online orders you will be required to register with Valley Online: If you received this Exhibitor Service Kit in the Ordering Open , a direct link and your temporary password to online ordering were included within that . Click on the link to be directed to our website and begin ordering. ( If you have previously placed orders with us, enter your login name (your address previously provided) and your password on Valley s online ordering website ( If you have forgotten your password, press "Forgot Password" to receive a new temporary password. To register online for access visit press Register Now and complete your registration setup, once complete an will be sent with your login credentials. Helpful Hints Order early and take advantage of the advance pricing to receive discounted rates. Ship early to avoid delays. Shipments arriving late at show site will incur an additional cost and delays may occur. All correspondence, including final invoices, will be sent to the contact listed on the Recap of Cost & Payment form. Valley Expo & Displays will not accept orders without payment in full. Ordering Information Valley Expo & Displays does not take orders over the phone. All pre show orders must be entered online at ( faxed to ( ), or ed to (automationfair@valleyexpodisplays.com) by October 29, After this date orders must be placed at the service desk at the show site during exhibitor move-in. Items ordered at show site are subject to avail-ability. Thank you for your business and we look forward to seeing you at the show! Please contact our Exhibitor Services Department at or automationfair@valleyexpodisplays.com with any questions you may have AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

2 CALENDAR OF DEADLINE DATES Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 Important Dates Show Registration (Open) Deadline Dates TBD Order Forms Deadline Dates Audio Visual/Computer Rental 10/15/18 Carpet Rental 10/17/18 Porter Services 10/17/18 Portable Modular Display Rental 10/17/18 Early Move-In 10/26/18 Electrical Services 10/15/18 Exhibit Installation and Dismantling 10/17/18 Internet & Telecommunications 10/15/18 Lead Retrieval TBD Plant & Floral Services 10/15/18 Plumbing Services 10/15/18 Catering 10/15/18 Shipping Advance Receiving 11/6/18 Direct Receiving 11/13/18 Deadline Dates (surcharges will apply after date) Hanging Sign Hanging Sign Order Form 10/19/18 (including set up instructions and renderings) Hanging Sign Approval 10/8/18 Hanging Sign Received at advance warehouse 10/26/18 Deadline Dates (surcharges will apply after date) Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

3 TABLE OF CONTENTS Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 EARLY REQUEST Early Freight Delivery Request Form Page 1 GENERAL General Show Information Pages 2, 3 PAYMENT - CREDIT CARD AUTHORIZATION Recap of Cost & Payment (Credit Card Auth) Page 4 THIRD PARTY/EXHIBITOR APPOINTED CONTRACTOR Third Party Billing Page 5 Exhibitor Appointed Contractor Information Page 6 BOOTH FUNITURE AND CARPET Table and Chair Order Form Page 7 Accessories Order Form Page 8 Booth Carpet Order Form Page 9 Crown Jewel 18 Carpet Color Description Page 10 Designer Plus 28 Carpet Color Description Page 11 SHIPPING Marshalling Yard Procedures Page 12 Directions to Marshalling Yard & Map Page 13 Shipping Address & Receiving Dates Page 14 Advance Shipment Label Page 15 Direct Shipment Label Page 16 Advance Shipment Order Form Page 17 Direct Shipment Order Form Page 18 Freight Service Questionnaire-Must Complete Page 19 Outbound Shipping Information Page 20 Outbound Bill of Lading Instructions Page 21 PORATABLE MODULAR DISPLAY RENTAL Portable Modular Display Rental Order Form Page 22 Portable Modular Display Rental Descriptions Pages LABOR Pennsylvania Convention Center Work Site Rules Page 33 Porter Service Order Form Page 37 Hanging Sign Request Form Page 38 SIGN & BANNER Sign & Banner Order Form Page 39 Supplied Digital Art Standards Page 40 FLORAL EXHIBITS Plant & Floral Order Form Page 41 VALLEY SPECIALITY FUNISHINGS Furnishings Catalog Pages Price List & Order Form Pages RULES & REGULATIONS Automation Fair 2018 Rules & Regulations Pages DIRECTIONS Directions to Convention Center Pages FREIGHT CARRIERS YRC Freight Trade Show Service Information Pages 90,91 PENNSYLVANIA CONVENTION CENTER - UTILITIES Electrical Service Order Form Page 92 Rental Lighting Information & Order Form Pages 93, 94 Compressed Air, Water Drain, Natural Gas Service Order Form Pages 95, 96 Internet & Telephone Service Order Form Pages 97, 98 Utilities Services Rigging FAQ Sheet Pages 99, 100 AUDIO VISUAL VENDOR Computer & Audio Visual Order Forms Pages 101, 102 Audio Visual Meeting Room Order Form Pages 103, 104 LEAD RETRIEVAL Lead Retrieval Order Form Page 105 ARAMARK - FOOD SERVICE Aramark Booth Menu Pages 106, 107 Aramark Booth Menu Order Form Page 108 Exhibitor Supervised Labor Order Form Page 34 Valley Supervised Labor Order Form Page 35 Forklift Service Order Form Page 36 Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

4 Page 1 of 108 EARLY FREIGHT DELIVERY REQUEST Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 FORM DEADLINE: October 26, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 EARLY FREIGHT DELIVERY REQUEST We are offering exhibitors with 400 square feet or more of exhibit space the opportunity to have their freight delivered prior to the scheduled move-in. If you would like to have your shipment delivered to the show site on Saturday, November 10, 2018, it is necessary that you complete this form and return it by October 26, 2018, in order for us to make the proper arrangements. Please note all requests must be approved by the Automation Fair Committee. Early freight delivery does NOT apply to Hanging Signs. Hanging Signs MUST be sent to the advance warehouse. Please see Hanging Sign Information on page 38. Please instruct your carrier to arrive by 6:00AM. Exhibits will be unloaded in the order of arrival starting at 8:00AM until 4:30PM on November 10, Please return this form to: Early Delivery/Exhibitor Service Dept Fax: (815) automationfair@valleyexpodisplays.com Exhibitor: Booth Number: Signed: Date: Freight handling charges apply for all early freight deliveries. Please complete the Direct Shipment Order Form on page 18. * 25% surcharge will be charged on shipments for which this form is not received and early delivery is not approved. Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

5 GENERAL SHOW INFORMATION Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 2 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Valley Customer Service Phone: Fax: automationfair@valleyexpodisplays.com Office Hours: Mon - Fri; 8:00AM - 4:30PM (Central Standard Time) No telephone orders accepted; please complete and submit your order by Fax, , or Online. Show Management Joe Zons Phone: jmzons@ra.rockwell.com A standard 10' x 10' booth will include: Booth Package Black 8' Back Drape and 3' Side Drape (1) 7" x 44" Identification Sign Your exhibit area is NOT carpeted with facility carpeting. Aisles are carpeted in grey speckle color carpet. Exhibitor Schedule Exhibitor Move-In: Monday November 12, :00AM - 7:00PM (NO Re Entry after 5:00PM) Freight will be received on this date from 8:00AM-4:30PM Tuesday November 13, :00AM - 7:00PM (NO Re Entry after 5:00PM) Freight will be received on this date from 8:00AM-4:30PM Show Hours: Wednesday November 14, :00AM - 5:30PM Thursday November 15, :00AM - 4:00PM Exhibitor Move Out: Thursday November 15, :00PM - 10:00PM Friday November 16, :00AM - 2:00PM Drivers for all carriers must be checked in at the Valley Freight Desk for pick-up of freight by: 8:00PM on 11/15/18 and by 12:00PM on 11/16/18 Material Handling Advance to Warehouse Receiving Dates: 10/12/18 thru 11/6/18 Receiving Hours: Mon-Fri 7:30AM-2:30PM TO: Exhibiting Company Name and Booth # FOR: Automation Fair 2018 C/O Valley Expo & Displays YRC Freight 2627 State Road Bensalem, PA Direct to Show Site Receiving Dates: 11/12/18; 8:00AM - 4:30PM 11/13/18; 8:00AM - 4:30PM TO: Exhibiting Company Name and Booth # FOR: Automation Fair 2018 C/O Valley Expo & Displays Pennsylvania Convention Center 1101 Arch Street Philadelphia, PA Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

6 GENERAL SHOW INFORMATION Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 3 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Important Deadlines Take advantage of advance order discount pricing! To receive advance pricing your orders must be received with payment in full no later than the below date. Orders received after the advance price deadline will have their order placed at "Floor" pricing. Advance Price Deadline October 17, 2018 Freight received before or after receiving dates will incur an additional surcharge. Advance Shipments receiving dates: October 12, 2018 thru November 6, 2018 Advance Shipments receiving times: Mon-Fri 7:30AM-2:30PM Show Site Shipments receiving dates & times: November 12, 2018; 8:00AM - 4:30PM November 13, 2018; 8:00AM - 4:30PM Payment Policies Orders received without full payment or credit card information will not be processed. A credit card on file is required when using Valley Expo & Displays services, any additional charges incurred for equipment and/or services will be billed to the card on file. All charges must be paid prior to close of show. For your convenience, we accept all major credit cards as well as cash, checks, ACH, wire transfers. Cancellations & Adjustments Orders cancelled prior to move-in will be charged 50% of the original price. Orders cancelled after move-in begins will be charged 100% of the original price. Exhibitor may make adjustments to their order online before the pre show order deadline date. No adjustments/refunds will be issued after 14 days from the last day of the event, NO EXCEPTIONS Tax Exemption If your company is exempt for payment of sales tax, Valley Expo & Displays requires an exemption certificate for the state in which the services are used. Valley cannot omit sales tax from your order without a copy of your certificate. Third Party Payment Billing Exhibitor Appointed Contractor All third party and EAC forms must be completely filled out and submitted to Valley Expo & Displays. The exhibiting company is ultimately responsible for the payment of all charges. If no arrangements are made for payment of invoice(s) by the third party prior to the last day of the show, charges will revert back to the exhibitor. Exhibitor must inform their EAC that they must send a copy of their General Liability Insurance Certificate no later than 30 days prior to the first day of exhibitor move in or they will not be permitted to service your exhibit. Miscellaneous Rental items not ordered, yet found in booth space, are invoiced at "Floor" pricing. All rental items are subject to applicable taxes. All rental items remain the property of Valley Expo & Displays. All rental items are subject to availability. Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

7 Page 4 of 108 RECAP OF COST & PAYMENT Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 This form with your credit card information, and all applicable order forms must be forwarded to Valley Expo & Displays. Advance prices apply only to orders received with payment in full by the advance price deadline date. All orders received afterward, or at the show site will be subject to floor rates. We cannot accept phone orders, however, you may fax/mail/ your order to us, provided we have your complete, valid credit card information. You will receive an order confirmation once your order has been placed. All correspondence and final invoices will be ed to the contact listed below. Terms For your convenience, when you pay with a credit card, any additional charges incurred for equipment and services will be billed to your card. In any event, no services will be rendered until payment in full has been received. You are able to place your order without your booth number(s). Booth number(s) may be assigned at a later date and your order on file will be updated accordingly. Exhibitors who have applied for special billing considerations, and to whom credit is extended agree to pay as a service charge 1-1/2% per month (18% per annum) and to pay all costs of collection, including a reasonable attorney s fee on all charges not paid within 30 days of invoice date. Payment for labor and services ordered by the exhibitor, their display house or other third parties is the responsibility of the exhibitor. The undersigned (jointly or severally) hereby does primarily and unconditionally guarantee the payment and discharge at maturity of each and every obligation incurred by this designate or assigns (display house or third party agent) in such transaction and agrees in the event of default by such third party of any such obligation to pay and otherwise make good on demand by Valley Expo & Displays or its assigns at any time thereafter, any sums and obligations then owing by the exhibitor to Valley Expo & Displays. Order Summary SERVICES AND EQUIPMENT ORDERED $ Booth Furniture Order Form $ Accessories Order Form $ Booth Carpet Order Form $ Advance Freight Handling Order Form $ Direct Freight Handling Order Form $ Portable/Modular Display Rental Order Form $ Event Labor Order Form $ Forklift Service Order Form $ Porter Service Order Form $ Hanging Sign Order Form $ Sign & Banner Order Form $ Specialty Furnishings Order Form $ Total Now Due Please provide the following information so we may credit your account properly. Company Name Booth # Date Billing Address City & State Zip Address Name (please print) Phone Fax Check No. (if paying by check) Visa MC Amex Card Number Exp. Date / CVC2 3 digit or 4 digit code (SIGNATURE REQUIRED BELOW ON ANY CREDIT CARD CHARGES) X Cardholder Signature Cardholder's Name (please print) Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

8 Page 5 of 108 THIRD PARTY BILLING Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 This form is to be used if you wish to have a Third Party handle your display, and be billed for services. The Recap of Cost & Payment Form MUST be completed by the Third Party to be billed for services, however, we also must be provided with the Exhibiting Company s credit card information below for our files. Unless otherwise requested, all charges incurred will be billed to the Third Party. It should be understood that by signing this form or placing an order the Exhibiting Company agrees it is ultimately responsible for payment of charges. If your Third Party does not pay all charges in full before the end of the show, all charges will revert to the exhibiting company, due on receipt. Exhibiting Company Name: Booth #: Exhibitor Name: Exhibiting Company Information Exhibitor Signature: Exhibiting Company s credit card information: Visa MC Amex Discover / Exp. Date CVC2 Last 3 digits on back of card, 4 digits on front of AMX Account #: X Cardholder s Signature Print Cardholder s Name Cardholder s Billing Address City State Zip Indicate which services are to be invoiced to the Third Party: Services to be billed to third party ALL VALLEY SERVICES I&D LABOR/SUPERVISION MATERIAL HANDLING IN & OUT RENTAL FURNITURE/CARPET/SIGNS BOOTH CLEANING OTHER: Third Party Company Name: Contact Name: for Invoice: Address: Third Party Company Information City: State: Zip Code: Third Party Company s credit card information: Visa MC Amex Discover / Exp. Date CVC2 Last 3 digits on back of card, 4 digits on front of AMX Account #: X Cardholder s Signature Print Cardholder s Name Cardholder s Billing Address City State Zip Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

9 Page 6 of 108 EXHIBITOR APPOINTED CONTRACTOR Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 Contractor Requirements Submit this form if the exhibiting company intends to use a contractor other than Valley Expo & Displays. If the exhibiting company fails to comply with any of the requirements listed below the exhibitor appointed contractor will not be permitted to service your exhibit, and Valley Expo & Displays must be hired for installation and dismantle labor. The exhibitor appointed contractor will be able to provide supervision only. Exhibitor appointed contractors must use labor supplied by Valley Expo & Displays unless the following requirements are fulfilled: 1. The exhibitor must notify Rockwell Automation and Valley Expo & Displays of the intention to utilize an independent contractor no later than 30 days prior to the first day of move-in, furnishing the name, address and telephone number of the firm. 2. The Exhibitor shall provide evidence that the Exhibitor Appointed Contractor has proper certificates of insurance with at least the minimum as described below, unless Rockwell Automation requires more. a. Comprehensive General Liability not less than $1,000,000 with respect to injuries to any one person in an occurrence. b. $2,000,000 with respect to injuries to more than one person in any occurrence. c. Workers Compensation Insurance including employee liability coverage in the minimum amount not less than $1,000,000 of individual and/or aggregate coverage and/or statutory limitation. d. Automobile Liability with a limit of not less than $1,000,000 combined single limit - each accident. e. Umbrella/Excess Liability with a limit of not less than $1,000,000 each occurrence and {$1,000,000} each aggregate. f. Valley Expo & Displays, Rockwell Automation and Pennsylvania Convention Center must be named as additional insureds on a primary and non-contributory basis. 3. The exposition floor, aisles, loading docks, service and storage areas will be under the control of the Official Service Contractor, Valley Expo & Displays. 4. For services such as electrical, plumbing, telephone, and cleaning and drayage, no contractor other than the Official Service Contractor will be approved. This regulation is necessary due to licensing, insurance, and work done on equipment and facilities owned by parties other than the Exhibitor. Exhibitors shall provide only the material and equipment they own and is to be used in their exhibit space. 5. The Exhibitor Appointed Contractor: a. Must agree to abide by all rules and regulations of the show, as outlined in this exhibitor kit, including all union rules and regulations. b. Will share with Valley Expo & Displays all reasonable costs related to its operation, including but not limited to overtime pay for stewards, restoration of exhibit space to its initial condition. c. Must furnish Rockwell Automation and Valley Expo & Displays with the names of all on-site employees who will be working on the exposition floor and see that they have and wear at all times necessary identification badges as determined by Show Management. d. Shall be prepared to show evidence that it has a valid authorization from the Exhibitor for services. The exhibitor Appointed Contractor may not solicit business on the exhibit floor. e. Must confine its operations to the exhibit area of its clients. No service desks, storage areas, or other work facilities will be located anywhere in the building. The show aisles and public space are not a part of the Exhibitor s booth space and must be kept clear. f. Shall provide, if requested, evidence to Valley Expo & Displays that it possesses applicable and current labor contracts and must comply with all labor agreements and practices. The Exhibitor Appointed Contractor must not commit or allow to be committed by persons in its employment any acts could lead to work stoppages, strikes, or labor problems. g. Must coordinate all of its activities with Valley Expo & Displays. h. Must comply with all reasonable rules and regulations of Pennsylvania Convention Center, Rockwell Automation and Valley Expo & Displays in order to create a safe work environment. A failure to do so can result in a delay or termination of your right to continue if the condition cannot be corrected. 6. All information must be received by Valley Expo & Displays office no later than 30 days prior to the first day of move-in. Exhibiting Company Name: Booth Number: Exhibitor Appointed Contractor: Contractor Information Address: City: State: Zip Code: Phone Number: Address: Contact at Show: Type of Service to be preformed: Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

10 Page 7 of 108 TABLES AND CHAIRS ORDER FORM Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 Orders with payment in full must be received by October 17, 2018, for Advance Prices. All orders subject to availability of equipment. Prices include delivery to booth, set up and removal. Be sure to indicate skirting color. Orders received without color indicated will receive Foreman s choice. Skirting and/or Drape Color Selection: Skirted Tables 4th Side Skirting & Drape Plain Tables Cocktail Tables Blue White Gold Green Black Burgundy Red Teal Silver Purple Description Quantity Advance Floor Total 4' L x 30" H $ $ ' L x 30" H $ $ ' L x 30" H $ $ ' L x 42" H $ $ ' L x 42" H $ $ ' L x 42" H $ $ " x 13' Skirting Only (4th Side) $ $ " x 13' Skirting Only (4th Side) $ $ ' Drape (Side) per LnFt $ $ ' Drape (Back) per LnFt $ $ ' L x 30" H $ $ ' L x 30" H $ $ ' L x 30" H $ $ ' L x 42" H $ $ ' L x 42" H $ $ ' L x 42" H $ $ White Vinyl, 8' Long (tabletop covering) $ $ " Round, 30" High $ $ " Round, 42" High $ $ Exhibiting Company Name: Booth Number(s) Chairs Side Chair $ $ Padded Chair $ $ Bar Stool with Back $ $ Click Here for Online Ordering Subtotal $ 8% Sales Tax $ Total $ Must include Recap of Cost and Payment Form along with order form AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

11 Page 8 of 108 ACCESSORIES ORDER FORM Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 Accessories Orders with payment in full must be received by October 17, 2018, for Advance Prices. All orders subject to availability of equipment. Prices include delivery to booth and removal. All equipment remains property of Valley Expo & Displays. No orders will be accepted without payment in full. Labor to assemble Grid Wall is not included. Please refer to the Event Labor Order Form for assistance in assembling your grid wall if it will be needed. Grid Wall Description Quantity Advance Floor Total Tripod Adjustable Easel $ $ Garment Rack $ $ Bag Stand $ $ Literature Stand $ $ Wastebasket $ $ ' Upright with Base $ $ Crossbar $ $ Table Riser 1'x1'x4 White Skirted $ $ Posterboard 4' x 8' $ $ Horizontal / Vertical (Circle one) 2' W x 4' H Panel $ $ ' W x 6' H Panel $ $ ' W x 8' H Panel $ $ "T" Base, per set $ $ " Shelf Bracket $ $ " Shelf Bracket $ $ Ball Waterfall $ $ Hang Rail Mount $ $ Picture Hanger Mount $ $ Hat Display Mount $ $ Peg Hook $ $ ", 6", 12" (circle one) Exhibiting Company Name: Booth Number(s) Click Here for Online Ordering Subtotal $ 8% Sales Tax $ Total $ Must include Recap of Cost and Payment Form along with order form AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

12 Page 9 of 108 BOOTH CARPET ORDER FORM Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 Crown Jewel 18 Carpet Designer Plus 28 Carpet Padding Visqueen Taping Orders with payment in full must be received by October 17, 2018, for Advance Prices. Prices include installation, front edge taping and pickup at the close of the show. If your carpet order is different then your booth size you MUST include a layout diagram, failure to provide diagram will result in a 25% surcharge and any additional labor onsite to correct placement issues. Please send layout diagram to the information listed above or attach to your order online. automationfair@valleyexpodisplays.com for instructions on how to attach a file on-line. Carpet orders received without color indicated will receive Foreman s choice. All carpet provided by Valley Expo & Displays will have Visqueen installed and charged at the square foot rate indicated below. This is required to protect carpet during exhibitor move-in. Crown Jewel 18 Color Selection: Please refer to page 10 for Crown Jewel 18 color description. Custom size booth carpet is available in 10' widths only. This carpet is cut specifically to your booth measurements. You must include a layout for carpet installation if your carpet request size is different from your booth size. If you require additional carpet to cover steps, skids, or display fixtures, please include a floorplan and a quote will be forwarded to you before we proceed. Carpet Dimension Square Foot Advance Floor Total x $ 7.95 sq ft $ sq ft Designer Plus 28 Color Selection: Please refer to page 11 for Designer Plus 28 color description. Luxury carpet is cut specifically to your booth measurements. You must include a layout for carpet installation if your carpet request size is different from your booth size. If you require additional carpet to cover steps, skids, or display fixtures, please include a floorplan and a quote will be forwarded to you before we proceed. Carpet Dimension Square Foot Advance Floor Total x $ sq ft $ sq ft Description Square Foot Advance Floor Total Padding $ 3.15 per sq ft $ 4.10 per sq ft Visqueen (plastic covering) $ 1.10 per sq ft $ 1.45 per sq ft Additional taping $ 2.25 per sq ft $ 2.95 per sq ft Exhibiting Company Name: Booth Number(s) Click Here for Online Ordering Subtotal $ 8% Sales Tax $ Total $ Must include Recap of Cost and Payment Form along with order form AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

13 Page 10 of 108 Crown Jewel 18 Carpet Colors Black Burgundy Charcoal New Green Red Royal Blue Toast

14 Page 11 of 108 Designer Plus 28 Carpet Colors White Dove Silver Cloud Platinum Charcoal Graphite Black Mocha Gold Paprika Red Midway Blue Royal Blue Navy Key Lime Emerald Ivory Beige Burgundy Grape Soda Chocolate

15 Page 12 of 108 MARSHALLING YARD PROCEDURES Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 The purpose of the Marshalling yard is to control the flow of traffic and help ensure that everyone has an orderly and timely move-in/out. All carriers are required to check in FIRST at the marshaling yard. Marshalling Yard will be used for both the Move In and the Move Out. It is important that you advise your carrier of this Marshaling Yard information to better facilitate your direct shipment to showsite. Inbound shipments must have a certified weight ticket showing weight, a Bill of lading indicating the number of pieces, and type of merchandise, as well as a freight handling order with payment on-file. Shipments received without this information will be delivered to exhibitor's booth without guarantee of piece count or condition and a 25% surcharge will be applied to order. Shipments arriving without a specified weight on the BOL will be assigned and approximate weight by Valley. This weight will prevail. No liability will be assumed by Valley Expo & Displays for such shipments. A one time fee of $40.00 will be added to the Exhibitors order for carrier usage of Marshalling Yard during move in and move out. Marshaling Yard Address & Hours of Operation 1130 Vine Street Philadelphia, PA Hours of Operation: TBD All drivers must provide the following information: Driver Requirements Exhibitor Name Exhibitor Booth Number Shipper s City on Inbound or Destination City on outbound Carrier Bill of Lading Certified Weight Tickets IF YOU DO NOT HAVE ANY OF THE REQUESTED INFORMATION PLEASE CONTACT YOUR DISPATCH FOR ASSISTANCE Proceed to the marshalling yard to get a dock pass. To maintain order, direct access to the convention center dock will not be permitted without a dock pass obtained from the marshalling yard. Marshalling Yard procedures will be used for both move in and move out. Marshaling Yard Procedures Drivers will need to report to the marshalling coordinator to obtain a dock pass with assigned number. No vehicles will be allowed to enter the Pennsylvania Convention Center loading dock without first checking-in at the marshalling yard. At the Marshaling Yard, drivers will be dispatched to the appropriate dock, as space is available. Waiting time at the Marshaling Yard should be anticipated by your carrier. Every effort is made to keep this waiting time at a minimum. However, the waiting time depends on many factors, including the number of vehicles arriving to unload/load, the type of loads being unloaded, the number of booths on a truck, when the exhibitor has turned in their Valley BOL to the service desk, etc. Upon arrival at the convention center docks, the driver must turn in their assigned tickets that were received at the Marshalling yard to the freight desk to be unloaded/loaded. Once your vehicle has been unloaded/loaded, please move out of the loading dock as soon as possible. All drivers are expected to adhere to Valley Expo & Displays' policies and procedures with respect to the loading and unloading of trailers. Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

16 MARSHALLING YARD DIRECTIONS AND MAP Page 13 of 108 Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 Directions to Marshalling Yard Entrance to Marshalling yard is located on Vine Street Eastbound between And 12th and 11th Street. Proceed to 2nd light and make a left onto Vine St. East. Take Vine Street to ramp which is located East bound on Vine Street between 12th and 11th Streets GPS Address: 1130 Vine Street Philadelphia Pennsylvania Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

17 Page 14 of 108 SHIPPING ADDRESSES & RECEIVING DATES Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 Exhibitors may choose to ship freight to the advance warehouse or directly to show site. Valley Expo & Displays will receive and manage the freight at the warehouse and/or on show site as described in the following pages. Freight handling fees are paid to Valley Expo & Displays for these freight handling services, and are separate from and independent of freight transportation charges, which are paid to a freight carrier such as YRC, ABF, FedEx or any other carrier of the exhibitor's choosing. Exhibitors are responsible for securing a carrier of their choosing and arranging freight transportation to and from the event, and all associated transportation fees. All inbound shipments must have a certified weight ticket showing weight, and a Bill of lading indicating the number of pieces, and type of merchandise. Shipments received without this information will be delivered to exhibitor's booth without guarantee of piece count or condition a 25% surcharge will be applied to order for reweigh of shipment. No liability will be assumed by Valley Expo & Displays for such shipments. The weight is rounded up the next one hundred pounds (100 lbs) and is taken from the inbound BOL and/or certified weight ticket. Separate shipments will not be combined. Shipments arriving without a specified weight on the BOL will be assigned and approximate weight by Valley. This weight will prevail. SHIPPING ADDRESS AND RECEVING DATES Advanced Warehouse Shipping Address EXHIBITING COMPANY NAME BOOTH NUMBER AUTOMATION FAIR 2018 YRC FREIGHT C/O VALLEY EXPO & DISPLAYS 2627 STATE ROAD BENSALEM, PA Use this address and information on your inbound bill of lading if shipping your freight to the advance warehouse For your convenience, please use the freight labels provided in this service kit. Receiving hours: M - F 7:30AM - 2:30PM All shipments must be prepaid: Collect shipments will be refused. Certified Weight Ticket Advanced Warehouse Receiving Dates First day freight will be accepted at advanced location: 10/13/17 Last day freight will be accepted: 11/7/17 Direct to Show Site Shipping Address EXHIBITING COMPANY NAME BOOTH NUMBER AUTOMATION FAIR 2018 PENNSYLVANIA CONVENTION CENTER C/O VALLEY EXPO & DISPLAYS 1101 ARCH STREET PHILADELPHIA, PA Use this address and information on your inbound bill of lading if shipping your freight direct to the show site For your convenience, please use the freight labels provided in this service kit. All shipments must be prepaid: Collect shipments will be refused. Certified Weight Ticket. Marshaling yard will be used for show site shipments, please refer to page 12 for more information Direct to Show Site Receiving Dates and Times Do not send shipments to arrive in advance of 11/12/18 to the show site. The facility has no means of storage, and will refuse your shipment. Days freight will be accepted at show site: November 12, 2018; 8:00AM - 4:30PM November 13, 2018; 8:00AM - 4:30PM *Drivers must check in by 7:00AM on 11/12 & 11/13 Authorization To Provide Freight Handling Services: By completing the Freight Handling Order Form, it is understood that Valley Expo & Displays and its subcontractors do not automatically insure materials, that insurance, if any, shall be arranged by the Exhibitor and the amounts payable to Valley Expo & Displays for drayage services are based on the value of the material handling services and the scope of Valley Expo & Displays liability as herein set forth. The amounts payable to Valley Expo & Displays are unrelated to the value of the Exhibitor s property being handled by Valley Expo & Displays or its subcontractor. It is impractical and extremely difficult to fix the value of each shipment handled by Valley Expo & Displays or its subcontractors. It is agreed therefore that if Valley Expo & Displays or its subcontractors should be found liable for loss or damage to Exhibitor s materials, the liability shall be limited to the specific article that was physically lost or damaged. Such liability shall be limited to a sum equal to 30 cents per pound per article, with a maximum liability of $500 per item, or $1,000 per shipment, whichever amount shall be less, as agreed upon damages bit as a penalty, and such agreed upon damages shall be the Exhibitors exclusive remedy. Exhibits left on exhibit floor without return instructions will be returned to our warehouse and held for disposition at an additional charge. Valley Expo & Displays will not be responsible for condition, count or content until such time as exhibits or materials are picked up for removal after the close of the exhibition. Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

18 Page 15 of 108 RUSH EXHIBITOR MATERIAL FROM: ADVANCE SHIPMENT TO: EXHIBITING COMPANY Automation Fair 2018 SHOW NAME BOOTH NUMBER C/O VALLEY EXPO & DISPLAYS YRC FREIGHT 2627 STATE ROAD BENSALEM, PA Shipment Should Arrive Between: October 12, 2018 thru November 6, 2018 CERTIFIED WEIGHT TICKETS ARE REQUIRED FOR ALL SHIPMENTS. Drivers must check in by 2:30 pm to be guaranteed same day unloading. Carrier Number of pieces RUSH EXHIBITOR MATERIAL FROM: ADVANCE SHIPMENT TO: EXHIBITING COMPANY Automation Fair 2018 SHOW NAME BOOTH NUMBER C/O VALLEY EXPO & DISPLAYS YRC FREIGHT 2627 STATE ROAD BENSALEM, PA Shipment Should Arrive Between: October 12, 2018 thru November 6, 2018 CERTIFIED WEIGHT TICKETS ARE REQUIRED FOR ALL SHIPMENTS. Drivers must check in by 2:30 pm to be guaranteed same day unloading. Carrier Number of pieces

19 Page 16 of 108 RUSH EXHIBITOR MATERIAL FROM: DIRECT SHIPMENT TO: EXHIBITING COMPANY Automation Fair 2018 SHOW NAME BOOTH NUMBER C/O VALLEY EXPO & DISPLAYS PENNSYLVANIA CONVENTION CENTER 1101 ARCH STREET PHILADELPHIA, PA Shipment Should Arrive: November 12, 2018; 8:00AM-4:30PM November 13, 2018; 8:00AM-4:30PM CERTIFIED WEIGHT TICKETS ARE REQUIRED FOR ALL SHIPMENTS. Carrier Number of pieces RUSH EXHIBITOR MATERIAL FROM: DIRECT SHIPMENT TO: EXHIBITING COMPANY Automation Fair 2018 SHOW NAME BOOTH NUMBER C/O VALLEY EXPO & DISPLAYS PENNSYLVANIA CONVENTION CENTER 1101 ARCH STREET PHILADELPHIA, PA Shipment Should Arrive: November 12, 2018; 8:00AM-4:30PM November 13, 2018; 8:00AM-4:30PM ERTIFIED WEIGHT TICKETS ARE REQUIRED FOR ALL SHIPMENTS. Carrier Number of pieces

20 ADVANCE SHIPMENT ORDER FORM Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 17 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 As the official service contractor, Valley Expo & Displays is the exclusive provider of freight services. Material handling includes unloading your exhibit material, storing up to 30 days in advance at the warehouse address, delivering it to the booth, handling of empty containers to and from storage, and removing of material from the booth for loading onto your outbound carrier. Shipments by carriers not giving delivery receipts or bill of lading, will be accepted and delivered to your booth space with no guarantee of piece count or condition. No liability whatsoever will attach to Valley Expo & Displays for those shipments. Valley Expo & Displays assumes no liability for lost or damaged items stored during any event. Cost to transport your exhibit material to and from the convention or event is not included. Information Advantages Freight is accepted October 12, 2018 thru November 6, 2018 To ensure timely arrival of your materials at show site, freight should arrive by November 6, Freight will still be received after the deadline date; however, delays may occur and additional charges will apply. The warehouse receives shipments Monday through Friday, except holidays. The warehouse will accept crates, cartons, skids, trunks/cases and carpets. All shipments must have a bill of lading or delivery slip indicating the number of pieces, type of merchandise and weight. Certified weight tickets must accompany all shipments. Freight Questionnaire must be submitted with this form There are several advantages to shipping in advance to the warehouse versus directly to the show site: Exhibitors can confirm shipment has arrived in advance of the move-in date. Materials may be delivered to your booth prior to your arrival on site. Delivery dates and times are more flexible. Estimating Material Handling Charges Charges will be based on the weight of your shipment. Each shipment received is considered separately. The shipment weight will be rounded to the next 100 lbs. Each 100 lbs. is considered one cwt (one hundred weight). All shipments are subject to reweigh. (200lbs minimum charged on all shipments weighing 51lbs - 200lbs) Select the category that best describes your shipment. There are two categories of freight: Crated: Material that is skidded or is in any type of shipping container that can be unloaded at the dock with no additional handling required. Special Handling: Material delivered by a carrier in such a manner that it requires additional handling, such as ground unloading, stacked or constricted space unloading, designated piece unloading, shipment integrity, alternate delivery location, loads mixed with pad wrapped material, carpet and/or pad only shipments, no documentation and shipments that require additional time, equipment or labor to unload. Federal Express, UPS Ground, & DHL are included in this category due to their delivery procedures. Add Overtime and/or Double Time surcharges for inbound if material is delivered to the booth during the overtime and/or double time period. Add Overtime and/or Double Time surcharges for outbound if material is loaded onto the outbound carrier during the overtime and/or double time period. Add the early/late surcharge if the shipment is accepted at the advance warehouse before or after the deadline dates listed above. Straight Time : 8:00 AM to 4:30 PM Monday through Friday Overtime: Double Time: 4:30 PM to 8:00 AM Monday through Friday; All day Saturday All day Sunday and Holidays (Overtime/Double Time will be applied to all freight received at the warehouse that must be moved into or out of booth during above listed times) Rates Rate Classifications Price Per CWT 200lb Minimum Crated or Skidded $ $ Special Handling $ $ Small Package A small package shipment is a shipment totaling any number of pieces with a combined weight not to exceed 50lbs that is received on the same day from the same shipper and delivered by the same carrier First Carton $ Each Additional Carton $ Additional Surcharges Early/Late Delivery Show Site/Advance Warehouse Surcharge Overtime - Inbound and/or Outbound Surcharge Double Time - Inbound and/or Outbound Surcharge No Weight ticket - Reweigh Surcharge 20% Surcharge per CWT 25% Surcharge per CWT 50% Surcharge per CWT 25% Surcharge per CWT Rate Classification Weight CWT Price Per CWT Estimated 100 = $ $ Estimate of Charges Additional Surcharges (% added to price per CWT) Inbound Out Bound N/A OT (+ 25%) DT (+ 50%) OT (+ 25%) DT (+ 50%) Small Package First Carton $ Additional Carton # of additional carton x $39.15 $ This calculation is only an estimate. Invoicing will be done from the actual weight. Adjustments will be made accordingly. Total Estimated $ 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX: Click Here for Online Ordering

21 Page 18 of 108 DIRECT SHIPMENT ORDER FORM Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 As the official service contractor, Valley Expo & Displays is the exclusive provider of freight services. Material handling includes unloading your exhibit material, delivering it to the booth, handling of empty containers to and from storage, and removing of material from the booth for loading onto your outbound carrier. Shipments by carriers not giving delivery receipts or bill of lading, will be accepted and delivered to your booth space with no guarantee of piece count or condition. No liability whatsoever will attach to Valley Expo & Displays for those shipments. Valley Expo & Displays assumes no liability for lost or damaged items stored during any event. Cost to transport your exhibit material to and from the convention or event is not included. Information Freight will be accepted: November 12 & 13; 8:00AM - 4:30PM Do not ship to the facility prior to November 12, Early shipments to the show site may be refused All shipments must have a bill of lading or delivery slip indicating the number of pieces, type of merchandise and weight Certified weight tickets must accompany all shipments Ship pre-paid; collect shipments will be refused Freight Questionnaire must be submitted with this form Estimating Material Handling Charges Charges will be based on the weight of your shipment. Each shipment received is considered separately. The shipment weight will be rounded to the next 100 lbs. Each 100 lbs. is considered one cwt (one hundred weight). All shipments are subject to reweigh. (200lbs minimum charged on all shipments weighing 51lbs - 200lbs) Select the category that best describes your shipment. There are two categories of freight: Crated: Material that is skidded or is in any type of shipping container that can be unloaded at the dock with no additional handling required. Special Handling: Material delivered by a carrier in such a manner that it requires additional handling, such as ground unloading, stacked or constricted space unloading, designated piece unloading, shipment integrity, alternate delivery location, loads mixed with pad wrapped material, carpet and/or pad only shipments, no documentation and shipments that require additional time, equipment or labor to unload. Federal Express, UPS Ground, & DHL are included in this category due to their delivery procedures. Uncrated: material that is shipped loose or pad-wrapped, and/or unskidded machinery without proper lifting bars or hooks. Add overtime and/or double time charges for inbound if material is delivered to the booth during the overtime and/or double time period. Add overtime and/or double time charges for outbound if material is loaded onto the outbound carrier during the overtime and/or double time period. Add the early/late surcharge if the shipment is accepted at the show site before or after the deadline dates listed above. Straight Time : Overtime: Double Time: 8:00 AM to 4:30 PM Monday through Friday 4:30 PM to 8:00 AM Monday through Friday; All day Saturday All day Sunday and Holidays (Overtime/Double Time will be applied to all freight received at the show site that must be moved into or out of booth during above listed times) Rates Rate Classifications Price Per CWT 200lb Minimum Crated or Skidded $ $ Special Handling $ $ Uncrated $ $ Small Package A small package shipment is a shipment totaling any number of pieces with a combined weight not to exceed 50lbs that is received on the same day from the same shipper and delivered by the same carrier First Carton $ Each Additional Carton $ Additional Surcharges Early/Late Delivery Show Site/Advance Warehouse Surcharge Overtime - Inbound and/or Outbound Surcharge Double Time - Inbound and/or Outbound Surcharge No Weight ticket - Reweigh Surcharge 20% Surcharge per CWT 25% Surcharge per CWT 50% Surcharge per CWT 25% Surcharge per CWT Rate Classification Weight CWT Price Per CWT Estimated 100 = $ $ Estimate of Charges Additional Surcharges (% added to price per CWT) Inbound Out Bound N/A OT (+ 25%) DT (+ 50%) OT (+ 25%) DT (+ 50%) Small Package First Carton $ Additional Carton # of additional carton x $39.15 $ This calculation is only an estimate. Invoicing will be done from the actual weight. Adjustments will be made accordingly. Total Estimated $ 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX: Click Here for Online Ordering

22 Page 19 of 108 FREIGHT SERVICE QUESTIONNAIRE Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, Estimate total number of pieces being shipped: Crated Uncrated Machinery Total 2. Indicate total number of trucks in each category that you will use: Van Line Common Carrier Flatbed 3. List carrier name(s): Company Truck Overseas Container 4. If using a Customs Broker, please print name: Phone 5. Print the name of person in charge of your movein: ALL EXHIBITORS SHIPPING FREIGHT MUST RETURN THIS FORM 6. What is the minimum number of days required to set your displays? 7. What is the weight of the single heaviest piece that must be lifted? Lbs. 8. What is the total weight of your exhibit or equipment being shipped? Lbs. 9. Is there any special handling equipment required to unload your exhibit materials, i.e. extended forklift blades, special slings, lifting bars, etc.? It is the responsibility of the Exhibitor to provide proper special handling instructions. Failure to provide these instructions will result in the elimination of any liability for loss or damage by Valley Expo & Displays. DIRECT SHIPMENTS ONLY: 1. What date and time are you scheduling your shipment(s) to arrive on-site? Exhibiting Company Name: Booth Number(s) Phone Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

23 Page 20 of 108 OUTBOUND SHIPPING INFORMATION Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 LABEL REQUEST DEADLINE: October 18, 2017 ADVANCE PRICE DEADLINE: October 17, 2018 Outbound shipping is not an automatic process. Each shipment must have freight handling services on order and a completed Bill of Lading in order to ship materials from the show. All pieces must be labeled individually. After materials are packed, labeled and ready to be shipped, the completed Bill of Lading must be turned in at the Valley Service Desk. Do not leave this in your booth with your shipment. Call your designated carrier with pick-up information. In the event your carrier fails to show by carrier check in time indicated below, your shipment will be rerouted to Valley Expo & Displays official show carrier at exhibitor s expense. Tear Down The show closes at 4:00PM on November 15, Please do not tear down prior to the close of the show. Empty crates will be brought to your booth after Aisle carpet is removed. Outbound Pick-Up Address & Carrier Check In Marshaling yard will be used for move out. Please refer to Marshaling yard information form on page12 Each exhibitor is responsible for arranging prompt pick-up and removal of outbound shipments. If you are using a carrier other than the official show carrier, it is your responsibly to contact the carrier and advise them that they must be checked in and the appropriate times. Drivers are placed in line for loading on a first-come, first serve basis, provided the exhibitor is completely packed and a Bill of Lading has been turned into the Service Desk. Should your carrier fail to check in by the designated time, Valley Expo & Displays reserves the right to re-route the shipment via the official show carrier as necessary, at the exhibitor's expense. Carrier check in at the Marshalling Yard Date and Time: 8:00PM on November 15th & 12:00PM on November 16th Outbound Bill of Lading All outbound shipments require a Valley Bill of Lading. Bills of Lading will be distributed to your booth before move out. If you do not receive a bill of lading please see the Valley Service Desk. A Bill of Lading must be completed for each truckload and destination. If you have multiple shipping destinations or multiple truckloads to one destination, additional Bill of Ladings are available at the valley Service Desk. No Bill of Lading will be issued until your invoice has been paid in full. Return the completed Bill of Lading to the Valley Service Desk when your materials are packaged and ready to be shipped. Turning in your Bill of Lading indicates to Valley that your shipment is ready to be loaded. The name of the carrier listed on your completed Bill of Lading must match the name of the carrier checking in or your freight will not be released. Outbound Miscellaneous Services Shrink Wrap Banding $ per pallet + dismantle labor (please see labor order form for dismantle labor rates) $ 1.25 per foot + dismantle labor (please see labor order form for dismantle labor rates) Blank labels are available at the Valley Service Desk. You may also request pre-printed labels if needed. All request MUST be made by deadline. Pre-printed labels will be distributed to your booth with the Bill of Lading before move out. Exhibiting Company: Booth #: Label Request # of Shipping labels requested: Ship To: Attention: Street Address: City: State: Zip Code: Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

24 Page 21 of 108 OUTBOUND BILL OF LADING INSTRUCTION Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

25 Page 22 of 108 PORTABLE MODULAR DISPLAY RENTAL Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 Miscellaneous Orders with payment in full must be received by October 17, 2018, for Advance Prices. All orders subject to availability of equipment. Rental includes delivery to booth, installation and dismantle of exhibit. Electrical service and labor to install lights are not included. Graphics Sold Separately: Headers do not include graphics. Headers can be one color or full four color digital process. There are several graphic options; Headers, Small panels, Backlit panels, Full length panels. Design is available and all proofing can be done via . Call (877) for all services available. Graphics, taxes and shipping out after the show are not included. 10' x 10' Displays 10' x 20' Displays 20' x 20' Displays Kit# Description Advance Floor 115 Capsule Counter $ $ Fan Counter $ $ Meter Counter $ $ Meter Counter $ $ Rectangle Counter $ $ Rectangle Counter w/display $ $ Full View Display Counter $ $ Pedestal $ $ LIT Literature Rack $ $ IPAD ipad Stand $ $ * Inline Table Top Pop Up $ $ * Inline Floor Standing Pop Up $ $ * Inline Floor Standing Pop Up w/counter $ $ Inline Floor Standing Hardwall $ $ Inline Floor Standing Hardwall w/counter $ $ * Inline 20 Ft Fabric $ 11, $ 14, * Inline 20 Ft Serpentine Pop Up $ $ * Inline 20 Ft Hybrid $ $ 12, Inline 20 Ft Hardwall $ $ 11, Inline 20 Ft Hardwall w/counter $ 10, $ 13, * Island 20 x 20 Ft Display $ 15, $ 20, * Island 20 x 20 Ft Display $ 17, $ 22, * Island 20 x 20 Ft Display $ 14, $ 19, Kit # 1160 includes draped table (circle color) Blue White Gold Green Black Burgundy Red Teal Silver Purple All 10' x 10', 10' x 20' and 20' x 20' Display kits includes a Crown Jewel 18 (circle color) Black Burgundy Charcoal New Green Red Royal Blue Toast *Kits that include lighting Exhibiting Company Name: Booth Number(s) Kit # Qty Price $ $ Optional Graphic Yes No Click Here for Online Ordering Subtotal $ 8% Sales Tax $ Total $ Must include Recap of Cost and Payment Form along with order form AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

26 PORTABLE MODULAR DISPLAY DESCRIPTION KIT 115, 129, & 130 Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 23 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Counter Kit 115 Capsule counter Freestanding counter constructed of lower Velcro compatible black fabric panels, black laminate top and locking storage. Dimensions approximately: wide x 20 deep x 40 high All Rentals include: Material handling, installation and dismantle of exhibit only. Optional front graphic 20 wide x 30 high. Additional cost $90.00 Counter Kit 129 Fan counter Freestanding counter constructed of aluminum extrusion gray base panels and black laminate top with locking storage. Overall dimensions approximately: wide x deep x 40 high All Rentals include: Material handling, installation and dismantle of exhibit only. Optional front graphic wide x high. Additional cost $ Counter Kit Meter counter Freestanding counter constructed of aluminum extrusion gray base panels and black laminate top and locking storage. Dimensions: wide x deep x 40 high All Rentals include: Material handling, installation and dismantle of exhibit only. Optional front graphic wide x high. Additional cost $ Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

27 PORTABLE MODULAR DISPLAY DESCRIPTION KIT 131, 135, & 137 Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 24 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Counter Kit Meter counter Freestanding counter constructed of aluminum extrusion gray base panels and black laminate top and locking storage. Dimensions: 76 wide x deep x 40 high All Rentals include: Material handling, installation and dismantle of exhibit only. Optional 2 front graphic wide x high. Additional cost for both $ Counter Kit 135 Rectangle counter Freestanding counter constructed of aluminum extrusion gray base panels and black laminate top and locking storage. Dimensions: 48 wide x 24 deep x 40 high All Rentals include: Material handling, installation and dismantle of exhibit only. Optional front graphic wide x high. Additional cost $ Counter Kit 137 Rectangle counter with display case top Freestanding counter constructed of aluminum extrusion gray base panels and a clear plex top section and locking storage. Dimensions: wide x deep x 40 high All Rentals include: Material handling, installation and dismantle of exhibit only. Optional front graphic wide x high. Additional cost $ Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

28 PORTABLE MODULAR DISPLAY DESCRIPTION KIT 138, 139, & LIT Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 25 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Counter Kit 138 Full View display case Freestanding case has plex top, front, sides with two interior plexi shelves, lights and locks. Dimensions approximately: 72 wide x 24 deep x 40 high All Rentals include: Material handling, installation and dismantle of exhibit only. Pedestal Kit 139 Freestanding counter constructed of white laminate base, black laminate top and locking storage. Dimensions approximately: 30 wide x 36 deep x 40 high All Rentals include: Material handling, installation and dismantle of exhibit only. Literature Rack Freestanding silver finish accordion style literature rack with 6 pockets 12 1/8 x 9 x 1 each. Dimensions approximately: 11 wide x 15 deep x 60 high All Rentals include: Material handling, installation and dismantle of exhibit only. Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

29 PORTABLE MODULAR DISPLAY DESCRIPTION Stand, 1160, & 1000 Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 26 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 ipad Stand Freestanding silver finish ipad stand with lock and power cord access. ipad NOT included. Dimensions approximately: 15.3"wide x 15.5"deep x 54.3"high All Rentals include: Material handling, installation and dismantle of exhibit only. Inline Kit 1160 Table Top Pop-up Display Classic expandable frame covered with black (Velcro compatible) fabric panels, one halogen stem light and one 6ft skirted table included. Dimensions approximately: 60 x 60 Standard table skirt color selection Standard carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen, electrical service and electrical labor to install lights. Graphics sold separately. (2) Front Mural Graphic Panels $ and (2) Mural Graphic End Caps $ nline Kit 1000 Floor Standing Pop-up Display Classic expandable frame covered with (Velcro compatible) black fabric panels, two halogen stem lights. Dimensions approximately: 10ft wide x 8ft high Standard carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen, electrical service and electrical labor to install lights. Graphics sold separately. (4) Front Mural Graphic Panels $ and (2) Mural Graphic End Caps $ Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

30 PORTABLE MODULAR DISPLAY DESCRIPTION KIT 1001 & 1002 Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 27 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Inline Kit 1001 Floor Standing Pop-up Display Classic expandable frame covered with (Velcro compatible) black fabric panels, two halogen stem lights. Includes counter. Dimensions approximately: 10ft wide x 8ft high Standard carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen, electrical service and electrical labor to install lights. Graphics sold separately. (4) Front Mural Graphic Panels $ , (2) Mural Graphic End Caps $510.00, and Capsule Counter Graphic $ Inline Kit 1102 (DK 102) Floor Standing Hardwall Display Aluminum extrusion frame with cool gray sintra infill panels Dimensions approximately: 10ft wide x 8ft high Standard carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen Optional front header graphic 117" wide x 12" high. Additional cost $ Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

31 PORTABLE MODULAR DISPLAY DESCRIPTION KIT 1127, & 2184 Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 28 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Inline Kit 1127 (DK 127) Floor Standing Hardwall Display Aluminum extrusion frame with cool gray sintra infill panels 1 meter back wall counter with sliding doors 1 meter shelf Dimensions approximately: 10ft wide x 8ft high Crown Jewel 18 carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen Optional front header graphic 117" wide x 12" high. Additional cost $ Inline Kit ft Valley Fabric Display Brushed aluminum extrusion with a rigid two piece center graphic, two side fabric graphics, three black canopies with lighting and black side wings. Includes counter kit 129. Dimensions approximately: 20ft wide x 8ft high Crown Jewel 18 carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen, electrical service and electrical labor to install lights. Graphics sold separately. Graphic package as shows $2, Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

32 PORTABLE MODULAR DISPLAY DESCRIPTION KIT 2192 & 2193 Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 29 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Inline Kit ft Serpentine Pop-up Display Classic expandable frame covered with (Velcro compatible) black fabric panels, set in a serpentine configuration with four halogen stem lights. Includes counter kit 115. Dimensions approximately: 20ft wide x 8ft high Standard carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen, electrical service and electrical labor to install lights. Graphics sold separately. (8) Front Mural Graphic Panels $ , and (2) Mural Graphic End Caps $ Inline Kit ft Hybrid Display Expandable frame covered with black (Velcro compatible) fabric panels, two halogen stem lights in the center flanked by aluminum structure and rigid infill panels. Includes counter kit 135. Dimensions approximately: 20ft wide x 8ft high Crown Jewel carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen, electrical service and electrical labor to install lights. Graphics sold separately. Graphic package as shows $5, Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

33 PORTABLE MODULAR DISPLAY DESCRIPTION KIT 2212 & 2367 Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 30 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Inline Kit 2212 (DK212) 20ft Hardwall Display Aluminum extrusion frame with cool gray sintra infill panels 2 meter back wall counter with sliding doors Dimensions approximately: 20ft wide x 8ft high Crown Jewel 18 carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen. Optional 3 piece front header graphic. Each piece 72" wide x 12" high. Additional cost for all pieces $ Inline Kit 2367 (DK367) 20ft Hardwall Display Aluminum extrusion frame with cool gray sintra infill panels 2 meter back wall counter with sliding doors (2) 2 meter shelves Dimensions approximately: 20ft wide x 8ft high Crown Jewel 18 carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen Optional 2 piece front header graphic. Each piece 117" wide x 12" high. Additional cost for all pieces $ Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

34 PORTABLE MODULAR DISPLAY DESCRIPTION KIT 4087 & 4541 Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 31 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Island Kit ft x 20ft Island Display (Innovative Control Solutions) Brushed aluminum extrusion creating a center tower and two side panels with gray infill panels. Includes six stem lights, one counter kit 129, one standard 36 x 30 café table and four standard side chairs. Dimensions approximately: 20ft x 20ft x 12ft or 16ft high Crown Jewel 18 carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen, electrical service and electrical labor to install lights. Graphics sold separately. Graphic package as shows $4,627. Island Kit ft x 20ft Island Display Brushed aluminum extrusion creating a corner storage closet, with four stem lights. A aluminum curved header, four workstations gray base panels, black laminate top with monitor mounting brackets and storage. One counter kit 129. Dimensions approximately: 20ft x 20ft x 12ft or 16ft high Crown Jewel 18 carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen, electrical service and electrical labor to install lights. Graphics sold separately. Graphic package as shows $5, Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

35 PORTABLE MODULAR DISPLAY DESCRIPTION KIT 4744 Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 32 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Island Kit ft x 20ft Island Display Brushed aluminum extrusion creating a round center tower. Two curved side wings with one workstation, gray base panels, black laminated top, on each end with storage. Includes four stem lights and one counter kit 129, Dimensions approximately: 20ft x 20ft x 12ft or 16ft high Crown Jewel 18 carpet color selection All Rentals include: Material handling, installation and dismantle of exhibit only. NOT Included: Electronic/audio visual equipment, padding/visqueen, electrical service and electrical labor to install lights. Graphics sold separately. Graphic package as shows $7, Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

36 PENNSYLVANIA CONVENTION CENTER NEW EXHIBITOR WORK RULES Page 33 of 108 Progressive work rules and streamlined services provide our customers with just the right amount of flexibility and independence they need, resulting in greater cost efficiencies and a better overall customer experience. Within your 600-square foot booth area or show space, full-time employees of the Exhibiting Company(As long as there is Not an EAC Contracted for the Booth set up/dismantle)have the freedom to set up and tear down your display, hang graphics and signage, and install floor coverings and nonrented AV equipment including tablets for non-public use. Place, move, and remove your own easels, signs and poster board materials. Open boxes, stock shelves, set up, plug in, hang up, and freely distribute your non-bulk products/literature within your booth or show space. Drive your non-commercial vehicle to a designated area to unload. Use your own dollies, luggage carriers, non-hydraulic carts, and two-to-four- wheel hand trucks. Use your own power tools and ladders (up to 6 feet) to set up and tear down exhibits. SMG Contractor Services can be reached at

37 EVENT LABOR EXHIBITOR SUPERVISED ORDER FORM Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 34 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Rate Information Orders with payment in full must be received by October 17, 2018, for Advance Prices. All installation and dismantling work will be preformed under the direction of exhibitor supervising qualified personnel in compliance with any applicable labor contracts. If you wish to hire Valley Expo & Displays to supervised work preformed, please complete the Valley Supervised Labor form. Labor check in & Out Hours of Operation Requesting Times Description of labor requested Description Advance Floor Straight Time - 8:00 AM and 4:30 PM on weekdays Overtime - before 8:00 am and after 4:30 pm on weekdays and all day Saturday Double time - All day Sunday and holidays $ $ $ A minimum charge of one (1) hour per man will apply to all labor orders, with the time commencing upon assignment of labor in accordance with your order. Half (1/2) hour minimum per man is charged thereafter. Labor must be cancelled in writing 24 hours in advance to avoid a one (1) hour cancellation fee per worker. $ $ $ We will attempt whenever possible to perform the work on straight time, contingent upon the schedules of the show producer and/or convention facility. Exhibitor must check in at the Valley Service Desk to pick up laborers. Upon completion of work, exhibitors must return to the Valley Service Desk to release laborers and to sign the work order indicating the labor completed. Failure to pick up labor at the Valle Service Desk will result in a one (1) hour per man no show charge. Time can only be guaranteed at the start of the working day (8:00AM), or the official beginning of set up, if later in the day. We will make every attempt to provide labor at times subsequent to 8:00 AM (or start of official set up); however, such starting times are approximate as they are dependent up on completion times of prior job assignments. Requesting Date & Time Date Labor Requested Time Labor Requested Installation Dismantle Estimate of Charges When scheduling dismantle, be sure to allow sufficient time for empty containers to be returned to your booth Move In Dates & Times Move Out Dates & Times 11/12/2018; 8:00AM-7:00PM 11/15/2018; 4:00PM-10:00PM 11/13/2018; 8:00AM-7:00PM 11/16/2018; 8:00AM-2:00PM Requested starting times cannot be guaranteed, however, every effort is made to meet all request MUST provide brief description of labor requested (e.g. lay carpet, install pop-up) AM or PM AM or PM Exhibiting Company Name: Booth Number(s) Computation of Labor Charges # of Workers X # Hours X Labor Rate Total Estimate Installation $ $ Subtotal $ Dismantling $ $ 8% Sales Tax $ Total $ Authorization to Provide Labor Services: By completing the Event Labor Form, it is understood that Valley Expo & Displays and its subcontractors do not automatically insure materials, that insurance, if any, shall be arranged by the Exhibitor and the amounts payable to Valley Expo & Displays for labor services are based on the value of the services rendered and the scope of Valley Expo & Displays liability as herein set forth. The amounts payable to Valley Expo & Displays are unrelated to the value of the Exhibitor s Must property include being Recap handled of by Cost Valley and Expo Payment & Displays Form its along subcontractors. with order It is impractical form. and extremely difficult to fix the value of each item handled by Valley Expo & Displays or its subcontractors. It is agreed therefore that if Valley Expo & Displays or its subcontractors should be found liable for loss or damage to Exhibitor s materials, the liability shall be limited to the specific article that was physically lost or damaged. Such liability shall be limited to a sum less than or equal to the charges for services rendered as agreed upon damages, and such agreed upon damages shall be the Exhibitors exclusive remedy. Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

38 EVENT LABOR VALLEY SUPERVISED ORDER FORM Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 35 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 Information & Requirements Orders with payment in full must be received by October 17, 2018, for Advance Prices. Inbound Shipping & Set Up Information Outbound Shipping Information Rate Information Description of labor requested All work is preformed under the supervision of Valley personal Exhibits can be set up prior to your arrival at exhibitor move in Exhibitor must forward all necessary instruction, drawing and/or diagrams in advance with this order. Please send layout diagram to the information listed above or attach to your order online. for instructions on how to attach a file on-line. A 25% Surcharge will apply to labor order if necessary documentation is not received as well as any additional labor onsite to correct resulting issues. Contact Person: Phone: Freight will be shipped to: Advance Warehouse Direct to Show Site Date Shipped: A minimum charge of one (1) hour per man will apply to all labor orders, with the time commencing upon assignment of labor in accordance with your order. Half (1/2) hour minimum per man is charged thereafter. Labor must be cancelled in writing 24 hours in advance to avoid a one (1) hour cancellation fee per worker. We will attempt whenever possible to perform the work on straight time, contingent upon the schedules of the show producer and/or convention facility. Straight Time - 8:00 AM and 4:30 PM on weekdays Overtime - before 8:00 am and after 4:30 pm on weekdays and all day Saturday Double time - All day Sunday and holidays Inbound Carrier: Total # of: Crates Cartons Fiber Cases Other Setup Plans/Photo: Flooring/Carpet: Attached to order With exhibit Sent to automationfair@valleyexopdisplays.com Rented from Valley Electrical Placement: Electrical under carpet Electrical in back of booth Other, must provide floor plan Graphic: With exhibit Shipped separately Special Tools/Hardware/Equipment Required: Ship to: Method of shipment*: Common Carrier UPS FedEx Show Carrier *If no carrier is provided prior to the show opening, your freight will be shipped with the show carrier. If labels are provided where will they be: Freight Charges: Prepaid Collect Bill to: Description Advance Floor $ $ $ $ $ $ Exhibiting Company Name: Booth Number(s) Estimate of Charges Computation of Labor Charges # of Workers X # Hours X Labor Rate Total Estimate Subtotal $ Installation $ $ Dismantling $ 8% Sales Tax $ $ Total $ Authorization to Provide Labor Services: By completing the Event Labor Form, it is understood that Valley Expo & Displays and its subcontractors do not automatically insure materials, that insurance, if any, shall be arranged by the Exhibitor and the amounts payable to Valley Expo & Displays for labor services are Must based include on the value Recap of the of services Cost and rendered Payment and the Form scope along of Valley with Expo order & Displays form. liability as herein set forth. The amounts payable to Valley Expo & Displays are unrelated to the value of the Exhibitor s property being handled by Valley Expo & Displays or its subcontractors. It is impractical and extremely difficult to fix the value of each item handled by Valley Expo & Displays or its subcontractors. It is agreed therefore that if Valley Expo & Displays or its subcontractors should be found liable for loss or damage to Exhibitor s materials, the liability shall be limited to the specific article that was physically lost or damaged. Such liability shall be limited to a sum less than or equal to the charges for services rendered as agreed upon damages, and such agreed upon damages shall be the Exhibitors exclusive remedy. Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

39 FORKLIFT SERVICE ORDER FORM Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 Page 36 of 108 ADVANCE PRICE DEADLINE: October 17, 2018 PLEASE COMPLETE THIS FORM FOR ALL IN-BOOTH FORKLIFT AND LABOR NEEDED. TO DETERMINE IF YOU NEED IN-BOOTH FORKLIFT AND LABOR, PLEASE READ THIS FORM CAREFULLY. In-Booth Forklift and Labor may be required to assemble displays or when uncrating, positioning, and reskidding equipment and machinery. A forklift is required for moving equipment and materials weighing 200 pounds or more within your booth. If you require a forklift, a crew will be assigned consisting of a Rigger Foreman and forklift with an operator. Forklift time required to move freight to and from the dock to your booth is included in the freight handling charges, refer to Advance or Direct order forms on pages for further information Important Information & Rates All exhibitors requesting a forklift must go to the Valley Service Desk to confirm forklift requests. All forklift requests should be confirmed by 2:00 pm the day prior, with the exception of the first day of move in. Requested starting times cannot be guaranteed, however, every effort is made to meet all requests. Valley reserves the right to dispatch all forklift calls based upon availability of crews and in the order that the requests are confirmed. Upon completion of work, an exhibitor representative must return to the Valley Service Desk to sign the completed work ticket and confirm accuracy of the work order. No adjustments will be made after the event. Forklift orders cancelled without a 24 hour notice will be charged a one (1) hour cancellation fee per worker and equipment ordered. If the forklift is not used at the time confirmed, there will be a one (1) hour no-show fee charged per worker and equipment ordered. The minimum charge for Forklift orders are one (1) hour per worker and forklift. Forklift rental thereafter is charged in half (1/2) hour increments. All rates are subject to change if necessitated by increased labor and material costs. Description Straight Time - 8:00 AM and 4:30 PM on weekdays Overtime - before 8:00 am and after 4:30 pm on weekdays and all day Saturday Double time - All day Sunday and holidays Advance Rate (per hour) $ $ $ Floor Rate (per hour) $ $ $ Estimate of Charges Please estimate the number of forklifts and hours per forklift needed for installation and dismantle. Invoice will be calculated according to actual hours worked. INSTALLATION Schedule Date(s) Schedule Start Time Schedule End Time Total # of Hours Total # of Forklifts Labor Rate Total Describe work to be done: Total DISMANTLE Schedule Date(s) Schedule Start Time Schedule End Time Total # of Hours Total # of Forklifts Labor Rate Total Describe work to be done: Total Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

40 Page 37 of 108 BOOTH & EXHIBIT PORTER SERVICE Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 Carpet Vacuuming Porter Service Orders with payment in full must be received by October 17, 2018, for Advance Prices. Submit this form if you want to order Valley Expo & Displays cleaning service for your booth in order to maintain booth cleanliness post set-up or throughout the entire event. Prices are based on total square footage of booth regardless of area to be cleaned. Standard Booth Size ( 10 x 10 ) = Square Footage ( 100 square feet per booth ) Carpet Vacuuming: Booth carpeting is clean upon installation; however, vacuuming services are available. Charges are based on booth square footage. Display installation can result in soiled carpet; therefore, we recommend ordering vacuuming at least once prior to show opening. Sq. Ft. X Advance Floor = Total Once Prior to Show Opening $ 0.72 $ Days - Prior to Show Opening Each Day $ 1.44 $ 1.87 Porter Service: Includes wipedown & dusting of all display surfaces and furnishings, and emptying of wastebaskets nightly. Sq. Ft. X Advance Floor = Total Once Prior to Show Opening $ 0.65 $ Days - Prior to Show Opening Each Day $ 1.30 $ 1.69 Exhibiting Company Name: Booth Number(s) Click Here for Online Ordering Subtotal $ 8% Sales Tax $ Total $ Must include Recap of Cost and Payment Form along with order form AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

41 Page 38 of 108 HANGING SIGN REQUEST FORM Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE Request must PRICE be DEADLINE: October submitted 17, by 2018 October 19, 2018 Guidelines Hanging Sign Policy and Procedures for Automation Fair 2018 Valley Expo & Display is responsible for the assembly and installation of all hanging equipment, truss, and signs. No display house or exhibitor personnel will be allowed to assemble any hanging structures. Display houses or exhibitor personnel are allowed to disassemble structures after Valley lowers structure. All hanging equipment must conform to Rockwell Automation rules and regulations and facility limitations. See Rockwell Automation Rules and Regulations included in this kit. All overhead electrical hanging signs must be certified for structural integrity and safety in order to be approved and installed by Valley. Electrical signs must be in working order and in accordance with codes of the City of Philadelphia. Electrical Service requirements must be ordered in advance on Electrical Service Order Form included in this kit Hanging anchor points must be pre-fabricated and ready to use. The total weight limit of the sign or materials is not to exceed 1500lbs, the weight of signs or materials is not to exceed 1000lbs, per hanging point. The placement of the all hanging signs shall be determined by the Electrical Contractor and/or Valley prior to installation to insure minimum stress to the supporting framework. Because of the structure of the ceiling, and the location of exhibits, in relation to support beams, your sign may have to be moved from your original specifications. Exhibitor Requirements Exhibitor must forward the this request form along with all necessary documentation which includes the below to: no later than October 8, 2018 Rendering (sketch or picture of detailed front views, and side views, including height/width/dimensions). Footprint drawing (top-down line drawing of sign, including dimensions). The exact positioning of the sign in relation to surrounding booths. All Set-Up instruction for complete assembly of hanging sign A exhibitor services representative from Valley will contact you with additional information and notify you of approval status. All Hanging Signs MUST be approved no later then October 8, 2018 All Hanging Sign must be sent to the Advance Warehouse in a separate container, clearly labeled Hanging Sign by October 26, 2018 A 25% Surcharge will apply to completed hanging sign order if necessary documentation is not received as well as any additional labor onsite to correct resulting issues. Crew Size: Hanging Crew; Three Laborers. Assembly; One Laborer Materials; Cable, clamps, etc. additional and charged accordingly Hanging Crew & Labor Rates Installation of Hanging Signs will begin on November 8, 2018 Dismantling of Hanging Signs will be begin on November 15, 2018 Rates are per hanging crew per hour. Installation - One hour Hanging Crew, and one hour assembly minimum. Dismantle - One hour Hanging Crew minimum. Straight Time cannot be guaranteed. Hanging Sign Hanging Crew Assembly/Additional Labor Rate Per Hour (Overtime & Doublet time rates may apply) $ Straight Time $ Straight Time Exhibiting Company Name: Booth # Contact Name: Address: Phone Number: Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

42 Page 39 of 108 SIGN & BANNER ORDER FORM Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ORDER ADVANCE DEADLINE: PRICE DEADLINE: October 17, 2018 Foamcore Signs White Background Vinyl Banners White Background Only Miscellaneous This form can be used to order custom show cards and banners for your exhibit booth. Custom signs and banners can be ordered in advance only. We must receive your order with payment by December 20, 2018, to guarantee delivery. Labor to install signs or banners is not included. Please refer to the Event Labor Order Form for assistance in installing your signs if it will be needed. All signs are printed on white background. 10 word limit per sign. Additional words and logos are extra. Valley has added the Vanguard Digital Printing Systems VR5D flatbed UV printer. It combines revolutionary technology, industry leading quality and outstanding speeds to satisfy the demands of the industry schedule. With the VR5D it gives the ability to print on a variety of substrates including foam, pvc, vinyl, acrylic and more! Our sign shop can produce any type of sign or banner you need, including multiple colors, photographic reproductions, etc. If an option or feature you want is not listed on this form, please call us for a special quote. Upload your artwork to: Or to automationfair@valleyexpodisplays.com Please see the following page for artwork requirements on Supplied Digital Arts Standards form. Contact name, address and phone number are requested in case we have questions. Contact for sign questions: Phone: Description Quantity Price Total 11' x 14' $ ' x 22' $ " x 28" $ " x 44" $ ' X 4' $ ' X 6' $ ' X 8' $ Grommets for hanging are included Easel Back $ Sign Grommets $ Color Background $ Add 25% Exhibiting Company Name: Booth Number(s) Sign copy to be arranged: Horizontally Vertically Subtotal 8% Sales Tax Total Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

43 Page 40 of 108 SUPPLIED DIGITAL ART STANDARDS Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 Supplied Digital Art Standards In an effort to provide you with the best graphics for your display, Valley requests that you review these file and media requirements when you supply digital art. Supplying the proper files insures that your output will look the way you expect, and keep addi onal charges to a minimum. If you have ques ons about file formats, resolu on, or other graphics concerns, please call us at or events@valleyexpodisplays.com Raster (Pixelbased) Art Raster art is the way most continuous tone images are produced. Scanned images, Photoshop files, tif, jpg, & bmp are examples of raster or pixel-based art. Resolution for these files should be at least 300dpi at output size. For example, a file for 16 x 20 inch output should be 4800 pixels by 6000 pixels. Both cmyk and rgb are acceptable but cmyk is preferred. Its helpful if all your files are consistently one or the other. Use for: Photographic or continuous tone images. Vector Art Vector art is 'resolution independent', meaning it can be scaled to any size with no loss of quality. Illustrations created in Adobe Illustrator or Freehand are vector art. EPS files are the most common format for vector art. NOTE: A Raster image imported or placed, and then saved in these programs is not changed into vector art it is still a raster image and may not be suitable for some output options. Logos & illustrations produced as cut vinyl MUST be vector art. If you cannot supply vector art, you may be charged for the time required to convert/recreate your art in the proper format. Use for: Cut vinyl, large format text, logos, graphic elements. Art Size: Art files should be submitted with at least 0.5 bleed. (ex. 22 x 28 sign would be 22.5 x 28.5 ) Raster Art can be supplied as Photoshop, jpg, tif, eps, bmp or other standard raster formats. Vector Art should be Adobe Illustrator (.ai), InDesign (.indd) or.eps (from Illustrator or InDesign) files with text converted to paths. Include all linked files. If text is not converted to paths, all fonts must be included. When sending vector art use the package option in Illustrator or InDesign to properly export all necessary files. QuarkExpress users, supply eps files with fonts embedded. Native Quark files are no longer supported. Media: CD or DVD. For FTP access contact your Valley representative. Please include a color hardcopy or pdf. Critical PMS colors should be indicated on the hardcopy. S ll have ques ons? Call or automationfair@valleyexpodisplays.com Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

44 Page 41 of 108 FLORAL ORDER FORM Name of Show: Location: Show Dates: Exhibitor: Booth Number: Bill to: Address: City: State: Zip: Phone: Fax: Company Representative: Purchase Order #: Job #: Date Ordered: COMPLETE THIS BOX ONLY IF DESIGNER IS NEEDED ON SITE Booth Contact: Contact Phone: Available Time/Date: PAYMENT INFORMATION Circle one VISA MC AMEX DISCOVER Name: Card #: Exp. Date: CVV code: Signature: Foliage plants and architectural containers on rental basis. Price includes: PLANT INSTALLATION, ARCHITECTURAL CONTAINERS, SERVICING THROUGHOUT THE SHOW, & DISMANTLING AT END OF SHOW NO ADJUSTMENTS NOR REFUNDS CAN BE MADE AFTER THE SHOW OPENING. Quantity Tropical Plants Price (Please specify quantity, heights, and variety) Potted Ferns $ Plants $ Plants $ Plants $ Plants $ Plants $ Containers for Plants: Black White TALLER PLANTS ARE AVAILABLE, PLEASE INQUIRE IN ADVANCE Blooming Plants Potted Mums (Yellow, White, & Lavender) $73.05 Potted Azaleas (Red, Pink, & White) $73.05 Bromeliads $73.05 Floral Arrangements Please Choose Tropical or Seasonal (Please indicate desired colors) Floral Arrangements are only guaranteed for 3 days Small Arrangement (12 x12 ) $86.50 Medium Arrangement (18 x14 ) $ Large Arrangement (24 x18 ) $ Tax (8%) TOTAL Total Floral Exhibits, Ltd. Phone #: S Leavitt St. Fax #: Chicago, IL PLEASE RETAIN A COPY FOR YOUR RECORDS

45 Page 42 of TRADE SHOW FURNISHINGS KIT CATALOG

46 Page 43 of 108

47 Page 44 of 108 BLANC Blanc Sofa Bright White Leather 75 W x 35 D x 35 H Blanc Loveseat Bright White Leather 54 W x 35 D x 35 H Blanc Chair Bright White Leather 33 W x 35 D x 35 H Blanc Bench Ottoman Bright White Leather 48 W x 24 D x 18 H Blanc Cube Ottoman Bright White Leather 17 Square x 17 H WHISPER Whisper Sofa White Leather 87 W x 37 D x 35 H Whisper Loveseat White Leather 61 W x 37 D x 35 H Whisper Chair White Leather 35 W x 37 D x 35 H 3

48 Page 45 of 108 WHISPER Whisper Bench Ottoman White Leather 60 W x 24 D x 17 H Whisper Square Ottoman White Leather 40 Square x 17 H Whisper Round Ottoman White Leather 46 Round x 17 H FUNCTION Modular Seating Collection Function Armless Chair White Leather 28 Square x 29 H Function Corner White Leather 28 Square x 29 H CONTINENTAL Modular Seating Collection Continental Curved Loveseat White Leather 82 W x 34 D x 31 H Continental Reverse Curved Loveseat White Leather 72 W x 34 D x 31 H Continental Wedge Ottoman White Leather 30 W x 34 D x 19 H 4

49 Page 46 of 108 CONTINENTAL Modular Seating Collection Continental Curved Bench White Leather 70 W x 26 D x 19 H Continental Half Moon Ottoman White Leather 33 W x 19 D x 19 H SOPHISTICATION Modular Seating Collection Sophistication Sofa White Leather 72 W x 31 D x 48 H Sophistication Loveseat White Leather 48 W x 31 D x 48 H Sophistication Chair White Leather 24 W x 31 D x 48 H Sophistication Corner White Leather 31 Square x 48 H Sophistication Ottoman White Leather 31 Square x 19 H 5

50 Page 47 of 108 BOCA Modular Seating Collection Boca Corner Black Leather 22 W x 27 D x 30 H Boca Armless Black Leather 27 Square x 30 H METRO Metro Sofa Black Leather 85 W x 35 D x 35 H Metro Loveseat Black Leather 60 W x 35 D x 35 H Metro Chair Black Leather 35 Square x 35 H Metro Square Ottoman Black Leather 40 Square x 17 H Metro Bench Ottoman Black Leather 60 W x 24 D x 17 H 6

51 Page 48 of 108 SUAVE MIDNIGHT Suave Midnight Sofa Midnight Suede 77 W x 36 D x 33 H Suave Midnight Loveseat Midnight Suede 54 W x 36 D x 33 H Suave Midnight Chair Midnight Suede 32 W x 36 D x 33 H GRAMMERCY Modular Seating Collection Grammercy Sofa Charcoal Leather 82 W x 36 D x 36 H Grammercy Loveseat Charcoal Leather 57 W x 36 D x 36 H Grammercy Chair Charcoal Leather 28 W x 36 D x 36 H Grammercy Corner Charcoal Leather 36 Square x 36 H Grammercy Round Ottoman Charcoal Leather 46 Round x 17 H Grammercy Square Ottoman Charcoal Leather 40 Square x 17 H Also Available in Bench Ottoman 60 W x 24 D x 17 H 7

52 Page 49 of 108 PARMA Parma Sofa Brown Leather 79 W x 37 D x 36 H Parma Loveseat Brown Leather 56 W x 37 D x 36 H Parma Chair Brown Leather 33 W x 37 D x 36 H Parma Bench Ottoman Brown Leather 60 W x 24 D x 17 H MONTANA MOCHA Montana Mocha Sofa Mocha Tan Fabric 79 W x 35 D x 34 H Montana Mocha Loveseat Mocha Tan Fabric 57 W x 35 D x 34 H Montana Mocha Chair Mocha Tan Fabric 35 Square x 34 H 8

53 Page 50 of 108 MADISON Madison Sofa Tan Fabric 86 W x 34 D x 34 H Madison Chair Tan Fabric 33 W x 34 D x 34 H Madison Sky Bench Teal Fabric 48 W x 24 D x 17 H Madison Ottoman - Willow Green Fabric 24 Square x 17 H Madison Ottoman - Sand Dollar Tan Fabric 24 Square x 17 H Madison Ottoman - Apricot Orange Fabric 24 Square x 17 H Madison Ottoman - Sunflower Yellow Fabric 24 Square x 17 H 9

54 Page 51 of 108 CHANDLER Chandler Sofa Red Leather 76 W x 37 D x 35 H Chandler Loveseat Red Leather 53 W x 37 D x 35 H Chandler Chair Red Leather 31 W x 37 D x 35 H Chandler Bench Ottoman Red Leather 60 W x 24 D x 17 H EVOKE Evoke Sofa Coffee Resin Frame with Tan Cushions 81 W x 35 D x 27 H Evoke Chair Coffee Resin Frame with Tan Cushions 33 W x 35 D x 27 H Evoke Cocktail Table Coffee Resin Frame 48 W x 24 D x 18 H 10

55 Page 52 of 108 EVOKE Evoke End Table Coffee Resin Frame 24 W x 28 D x 25 H Evoke Cube Table Coffee Resin Frame 18 Square x 18 H STAGE CHAIRS Midnight Stage Chair Midnight Microfiber 25 L x 26 D x 37 H Chamois Stage Chair Beige Microfiber 25 L x 26 D x 37 H Buckskin Stage Chair Tan Microfiber 25 L x 26 D x 37 H Empire Chair Black Leather White Leather 28 L x 32 D x 32 H Ibizia Chair Black Leather White Leather 31 L x 35 D x 32 H Tulip Chair Black Fabric/Tilt Back/Caster Feet 27 L x 26 D x 35 H 11

56 Page 53 of 108 STAGE CHAIRS Monarch Chair Bright White Leather 28 Square x 30 H OTTOMANS & BENCHES Curved Bench Continental White Leather 70 W x 26 D x 19 H Square Ottoman Metro Black Leather Whisper White Leather Grammercy Charcoal Leather 40 Square x 17 H Bench Ottoman Metro Black Leather Whisper White Leather Chandler Red Leather Grammercy Charcoal Leather Parma Brown Leather 60 W x 24 D x 17 H Essentials Storage Ottoman White Leather with Locking Mechanism 48 W x 24 D x 20 H Lock Not Included Round Ottoman Grammercy Charcoal Leather Whisper White Leather 46 Round x 17 H 1/4 Round Ottoman Grammercy Charcoal Leather Whisper White Leather 34 W x 19 D x 17 H 12

57 Page 54 of 108 OTTOMANS & BENCHES Madison Sky Bench Teal Fabric 48 W x 24 D x 17 H Madison Ottomans Left to Right: Willow, Sand Dollar, Apricot, Sunflower 24 Square x 17 H BANQUETTES Essentials Banquette White Leather 60 Round x 48 H (2 Pieces) Whisper Banquette White Leather 59 Round x 38 H (2 Pieces) Grammercy Banquette Charcoal Leather 59 Round x 38 H (2 Pieces) TURNING BEDS Essentials Turning Bed White Leather 96 W x 48 D x 36 H 13

58 Page 55 of 108 CUBE OTTOMANS Regency Cube Ottomans From left to right: Orange Fabric, Teal Fabric, Ruby Fabric, Camel Fabric, Apple Fabric, Fuchsia Fabric 18 Square x 18 H Cube Ottomans From left to right: Blanc Bright White Leather (17 Square x 17 H), Whisper White Leather, Metro Black Leather, Red Vinyl, Green Vinyl, Blue Vinyl, Purple Vinyl 18 Square x 18 H CHARGED Essentials Turning Bed - Charged White Leather 96 W x 48 D x 25 H *White slip cover available for black charging unit. *Maximum of 1 bed per power source. Boca Corner - Charged Bright White Leather 27 Square x 30 H *Maximum of 4 daisy linked together per power source. Boca Chair - Charged Bright White Leather 22 W x 27 D x 30 H *Maximum of 4 daisy linked together per power source. 14

59 Page 56 of 108 CHARGED Aspen Bar Table - Charged White / Brushed Steel 72 W x 26 D x 42 H *Maximum of 1 table per power source. Aspen Cocktail Table - Charged White / Brushed Steel 48 W x 24 D x 18 H *Maximum of 1 table per power source. White Conference Table - Charged White 96 W x 43 D x 30 H *Maximum of 1 table per power source. Patrice Table Chair - Charged Bright White Leather 28 W x 31 D x 31 H *Maximum of 6 daisy linked together per power source. Lincoln Bench - Charged Bright White Leather 59 W x 39 D x 17 H *Maximum of 3 daisy linked together per power source. OCCASIONAL TABLES Tribeca Tables End Table Wood/Black 24 W x 28 D x 22 H Console Table Wood/Black 48 W x 18 D x 30 H Cocktail Table Wood/Black 48 W x 28 D x 19 H Harmony Tables End Table Wood/Espresso 24 Round x 22 H Console Table Wood/Espresso 52 W x 18 D x 30 H Cocktail Table Wood/Espresso 51 W x 28 D x 18 H Novel Tables End Table Satin Steel 15 Square x 16 H Cocktail Table Satin Steel 46 W x 15 D x 16 H 15

60 Page 57 of 108 OCCASIONAL TABLES Aria Tables Red End Table Red/Brushed Steel 24 W x 20 D x 22 H Cocktail Table Red/Brushed Steel 44 W x 20 D x 18 H Aria Tables Green End Table Green/Brushed Steel 24 W x 20 D x 22 H Cocktail Table Green/Brushed Steel 44 W x 20 D x 18 H Aria Tables Blue End Table Blue/Brushed Steel 24 W x 20 D x 22 H Cocktail Table Blue/Brushed Steel 44 W x 20 D x 18 H Aria Tables Purple End Table Purple/Brushed Steel 24 W x 20 D x 22 H Cocktail Table Purple/Brushed Steel 44 W x 20 D x 18 H Aria Tables White End Table White/Brushed Steel 24 W x 20 D x 22 H Console Table White/Brushed Steel 44 W x 20 D x 30 H Cocktail Table White/Brushed Steel 44 W x 20 D x 18 H Aria Tables Charcoal End Table Storm Grey/Brushed Steel 24 W x 20 H x 22 H Console Table Storm Grey/Brushed Steel 44 W x 20 D x 30 H Cocktail Table Storm Grey/Brushed Steel 44 W x 20 D x 18 H Fuze Tables End Table Chrome/Zebrawood Laminate 24 Square x 23 H Console Table Chrome/Zebrawood Laminate 60 W x 16 D x 34 H Cocktail Table Chrome/Zebrawood Laminate 40 Square x 16 H London Tables End Table Chrome/Marble 24 Square x 23 H Console Table Chrome/Marble 60 W x 16 D x 34 H Cocktail Table Chrome/Marble 40 Square x 16 H Brooklyn Tables End Table Square - Chrome 22 Square x 20 H End Table Round - Chrome 20 Round x 20 H Cocktail Table Rectangle - Chrome 42 W x 24 D x 16 H Cocktail Table Round - Chrome 30 Round x 16 H 16

61 Page 58 of 108 OCCASIONAL TABLES Vivid Tables End Table - Smoked Powder Coat Finish 26 Square x 21 H Console Table - Smoked Powder Coat Finish 50 W x 24 D x 30 H Cocktail Table - Smoked Powder Coat Finish 50 W x 24 D x 16 H Club Tables End Table 44 W x 22 D x 18 H Cocktail Table 22 Square x 18 H (Includes built in Wireless LED Lighting) Rose Table 17 Round x 17 H Zanzibar Table 17 Square Cube End Tables Black 24 White Square x 21 H Cube Cocktail Tables Black 24 White Square x 16 H Phoebe Tables From left to right: Yellow, Lime Green, Rose, Gold, Teal 17 Round x 22 H Hylton Tablet Table White/Brushed Steel 18 W x 12 D x 28 H 17

62 Page 59 of 108 BARS & BAR BACKS VIP Glow Bar 6 Frosted Plexi with Built-in Wireless LED Kit 72 W x 24 D x 42 H(Bar) 13 D x 18 H (Shelf) *Includes remote control VIP Glow Bar 4 Frosted Plexi with Built-in Wireless LED Kit 48 W x 24 D x 42 H(Bar) 13 D x 18 H (Shelf) *Includes remote control Agile Bar Black with 2 shelves in back White with 2 shelves in back 48 W x 16 D x 42 H Blox Bar Back Walnut/Brushed Metal 30 W x 16 D x 86 H Please Inquire About Shelf Dimensions Piazza Bar Back Black White 44 W x 12 D x 79 H 13 W x 14 H (Inside Shelf) 18

63 Page 60 of 108 BAR STOOLS Vienna Stool Gray Acrylic Orange Acrylic Teal Acrylic 17 Square x 39 H Criss Cross Bar Stool Espresso Leather White Leather 15 W x 19 D x 41 H Escape Stool Natural Maple 16 Square x 41 H Silk Back Bar Stool Black White Blue Green Purple Red 17 W x 18 D x 42 H Euro Bar Stool Black 22 W x 24 D x 42 H Hourglass Bar Stool Black White 18 W x 20 D x 43 H Equino Stool Black White 15 W x 13 D x 35 H 19

64 Page 61 of 108 BAR STOOLS Nexus Stool White 19 W x 20 D x 44 H Clara Stool White 17 W x 21 D x 41 H Marcus Bar Stool Steel 17 Square (at footbase) x 29 H Regal Stool Brown Leather 19 W x 24 D x 45 H Caprice Stool Black Fabric 25 W x 26 D x 44 H Sonic Stool Black 22 W x 23 D x 42 H CAFE CHAIRS Vienna Chair Gray Acrylic Orange Acrylic Teal Acrylic 21 Square x 32 H Silk Back Chair Black Green White Purple Blue Red 17 W x 18 D x 34 H 20

65 Page 62 of 108 CAFE CHAIRS Nexus Chair White 19 W x 22 D x 32 H Clara Chair White 18 W x 21 D x 34 H Leslie Chair White 17 W x 21 D x 31 H Criss Cross Chair Espresso Leather White Leather 17 W x 21 D x 35 H Elio Chair Steel 17 Square x 33 H Caprice Chair Black 25 W x 24 D x 32 H Comet Chair Black 23 W x 22 D x 32 H (With Arms) 19 W x 22 D x 32 H (Without Arms) Regal Dining Chair Brown Leather 19 W x 23 D x 38 H Sonic Chair Black 20 W x 21 D x 32 H 21

66 Page 63 of 108 CAFE CHAIRS Escape Chair Natural Maple 17 W x 16 D x 32 H BAR TABLES Euro Bar Table Black/Black Round x 42 H Black/Black Round x 42 H Silk Bar Table Black/Chrome Round x 42 H Black/Chrome Round x 42 H City Bar Table Maple/Black Round x 42 H Maple/Black Round x 42 H Park Ave Bar Table Maple/Chrome Round x 42 H Maple/Chrome Round x 42 H Summit Bar Table White/Black Round x 42 H White/Black Round x 42 H Blanco Round Bar Table White/Chrome Round x 42 H White/Chrome Round x 42 H 22

67 Page 64 of 108 BAR TABLES Fuze Bar Table Zebrawood Laminate/Chrome 36 Square x 42 H Blanco Square Bar Table White/Chrome 24 Square x 42 H Blanco Rectangle Bar Table White/Chrome 72 W x 24 D x 42 H Spectrum Bar Table Red Red/Chrome 24 Square x 42 H Spectrum Bar Table Blue Blue/Chrome 24 Square x 42 H Spectrum Bar Table Purple Purple/Chrome 24 Square x 42 H Spectrum Bar Table Green Green/Chrome 24 Square x 42 H Chardonnay Bar Table Clear Glass/Chrome 31 Round x 42 H Zinc Bar Table Chrome 24 Round x 42 H 23

68 Page 65 of 108 BAR TABLES Aspen Bar Table White/Brushed Steel 72 W x 26 D x 42 H CAFÉ TABLES Euro Café Table Black/Black Round x 30 H Black/Black Round x 30 H Silk Café Table Black/Chrome Round x 30 H Black/Chrome Round x 30 H Park Ave Café Table Maple/Chrome Round x 30 H Maple/Chrome Round x 30 H City Café Table Maple/Black Round x 30 H Maple/Black Round x 30 H Summit Café Table White/Black Round x 30 H White/Black Round x 30 H Blanco Café Table White/Chrome Round x 30 H White/Chrome Round x 30 H 24

69 Page 66 of 108 CAFÉ TABLES Fuze Café Table Zebrawood Laminate/Chrome 36 Square x 30 H Blanco Square Café Table White/Chrome Rectangle 24 Square x 30 H Blanco Rectangle Café Table White/Chrome Rectangle 72 W x 24 D x 30 H Spectrum Café Table Red Red/Chrome 24 Square x 30 H Spectrum Café Table Blue Blue/Chrome 24 Square x 30 H Spectrum Café Table Purple Purple/Chrome 24 Square x 30 H Spectrum Café Table Green Green/Chrome 24 Square x 30 H Aspen Dining Table White/Brushed Steel 72 W x 30 D x 30 H Brio Dining Table Reclaimed Grey Stone Finish/Brushed Bronze 96 W x 48 D x 30 H 25

70 Page 67 of 108 OFFICE SEATING Tamiri High Back Chair Black Leather 25 W x 27 D x 45 H Tamiri Mid Back Chair Black Leather 25 W x 27 D x 39 H Tamiri Guest Chair Black Leather 25 W x 27 D x 37 H Accord Chair Black White 25 Square x 44 H Goal Task Chair Black 25 W x 24 D x 39 H Goal Task Chair Armless Black 21 W x 24 D x 39 H 26

71 Page 68 of 108 OFFICE SEATING Enterprise High Back Conference Chair Black Fabric 25 W x 27 D x 45 H Enterprise Mid Back Conference Chair Black Fabric 24 W x 26 D x 39 H Enterprise Guest Chair Black Fabric 25 W x 27 D x 37 H Goal Drafting Stool Black 25 W x 24 D x 48 H Goal Drafting Stool Armless Black 21 W x 24 D x 48 H CONFERENCE TABLES Conference Table Round Black Mahogany 42 Round x 29 H Conference Table Rectangle Black 6 Black 8 Mahogany 6 Mahogany 8 Maple 6 Maple 8 White 6 White 8 72 W x 36 D x 30 H 96 W x 48 D x 30 H 27

72 Page 69 of 108 OFFICE FURNITURE Computer Kiosk Black White 24 Square x 42 H Computer Counter Graphite 48 W x 24 D x 42 H Computer Desk Graphite 48 W x 24 D x 29 H 5 Shelf Bookcase Black Mahogany 36 W x 12 D x 72 H Black Credenza Black 60 W x 20 D x 29 H Black Double Pedestal Desk Black 60 W x 30 D x 29 H Genoa Storage Credenza Mahogany 2 Filing Cabinets 2-Drawers-Inside Shelves 66 W x 20 D x 29 H Genoa Kneespace Credenza Mahogany 2 Filing Cabinets/2-Drawers 66 W x 20 D x 29 H Genoa Executive Desk Mahogany Double Pedestal-Locking Drawers 72 W x 36 D x 29 H 28

73 Page 70 of 108 OFFICE FURNITURE Vivid Café Table Square Clear Glass/Smoked Powder Coat Finish 42 Square x 30 H Vivid Café Table Rectangle Clear Glass/Smoked Powder Coat Finish 60 W x 36 D x 30 H Brooklyn Rectangle Dining Table Clear Glass/Chrome 60 W x 36 D x 30 H Brooklyn Round Dining Table Clear Glass/Chrome 42 Round x 30 H Aspen Dining Table White/Brushed Steel 72 W x 30 D x 30 H Brio Dining Table Reclaimed Grey Stone Finish/Brushed Bronze 96 W x 48 D x 30 H 29

74 Page 71 of 108 METAL FILE & STORAGE CABINETS 2-Drawer File Black Letter 15 W x 25 D x 29 H Black Legal 18 W x 25 D x 29 H 4-Drawer File Black Letter 15 W x 25 D x 52 H Black Legal 18 W x 25 D x 52 H 2-Drawer Lateral File Black (Pictured) 36 W x 18 D x 27 H Black (Not Pictured) 36 W x 20 D x 29 H 4-Drawer Lateral File Black 36 W x 18 D x 54 H Storage Cabinet Black 36 W x 18 D x 72 H 30

75 Page 72 of 108 PEDESTALS Display Pedestals 42 Black 14 Square x 42 H Black 24 Square x 42 H Black 18 Square x 42 H White 14 Square x 42 H Display Pedestals 36 Black 14 Square x 36 H Black 24 Square x 36 H White 14 Square x 36 H White 24 Square x 36 H Display Pedestals 30 Black 14 Square x 30 H Black 24 Square x 30 H Black 18 Square x 30 H White 14 Square x 30 H Locking Pedestal Black White 24 Square x 42 H Fuze Pedestal Zebrawood Laminate/Chrome 16 Square x 44 H London Pedestal Marble/Chrome 16 Square x 44 H 31

76 Page 73 of 108 MISCELLANEOUS ITEMS Stanchion Chrome 41 H Stanchion Rope Red Velour 6 L Nero Literature Rack Black 15 W x 12 D x 54 H Argento Literature Rack Aluminum 15 W x 12 D x 54 H Alto Literature Rack Black/Metal 11 W x 10 D x 57 H Compact Refrigerator White 4 Cu Ft 21 W x 22 D x 32 H ipad Stand Black Silver 14 W x 42 H (Fits 2nd, 3rd, or 4th ipad generations. Can be positioned in portrait or landscape views.) *Apple and ipad are registered trademarks of Apple Inc. 32

77 Page 74 of 108 LIGHTING Brushed Steel Lamps Table Lamp White/Steel 26 H Floor Lamp White/Steel 66 H Brushed Nickel Lamps Table Lamp White/Nickel 29 H Floor Lamp White/Nickel 60 H Rubbed Bronze Lamps Table Lamp White/Bronze 28 H Floor Lamp White/Bronze 60 H Brushed Steel Lamps Table Lamp Red/Steel 26 H Floor Lamp Red/Steel 66 H Neutrino Floor Lamp Steel 67 H 33

78 Page 75 of 108 DESIGN YOUR BOOTH SPACE YOUR WAY 10x20 Booth Footprint Boca Chair - Charged Brooklyn Round Cocktail Table Phoebe Table - Lime Green Aspen Bar Table - Charged Silk Back Stool - Green 10x10 Booth Footprint Madison Chair Madison Bench - Apricot Phoebe Table - Hazelnut Blox Bar Back 10x10 Booth Footprint Patrice Tablet Chair - Charged Brooklyn Round End Table Equino Stool - Black Chardonnay Bar Table 20x20 Booth Footprint Grammercy Loveseats Grammercy Corner Brooklyn Round Cocktail Table Monarch Chairs Brooklyn Round End Table Piazza Bar Back - Espresso Silk Back Stools - Black Aspen Bar Tables - Charged 6 VIP Bar

79 Page 76 of 108

80 Page 77 of 108 Speciality Furnishings Order Form TRADE SHOW INFORMATION Show Name Booth # Company Name Onsite Contact Name Onsite Contact events@valleyexpodisplays.com Fax: Company Address Onsite Contact Cell # ***All Furniture Subject to Availability*** Terms & Conditions: Payments: Payment terms 100% Payment due prior to delivery to secure the order. Cancellation Fee: Show Site Orders: If cancelled within 4 business days prior to delivery, a 100% charge will be applied. Show Site orders will be based on availability and charged a Late Fee. Please contact Valley Expo & Displays for late fee cost. Advance Pricing Payment and order form must be received by advanced date published on the General Show Information pages to receive advance pricing Item Number Weight Dimensions Advance Floor Qty. Total Whisper (Pg. 3) lbs. Whisper White Leather Sofa 87"W x 37"D x 35"H $ $1, $ lbs. Whisper White Leather Loveseat 61"W x 37"D x 35"H $ $1, $ lbs. Whisper White Leather Chair 35"W x 37"D x 35"H $ $ $ lbs. Whisper White Leather Bench Ottoman 60"W x 24"D x 17"H $ $ $ lbs. Whisper White Leather Square Ottoman 40"Square x 17"H $ $ $ lbs. Whisper White Leather Round Ottoman 46"Round x 17"H $ $ $ Function (Pg. 3) lbs. Function White Leather Armless Chair 28"Square x 29"H $ $ $ lbs. Function White Leather Corner 28"Square x 29"H $ $ $ Continental (Pg. 4) lbs. Continental White Leather Curved Loveseat 82"W x 34"D x 31"H $ $1, $ lbs. Continental White Leather Reverse Loveseat 72"W x 34"D x 31"H $ $1, $ lbs. Continental White Leather Wedge Ottoman 30"W x 34"D x 19"H $ $ $ lbs. Continental White Leather Curved Bench 70"W x 26"D x 19"H $ $ $ lbs. Continental White Leather Half Moon Ottoman 33"W x 19"D x 19"H $ $ $ Sophistication (Pg. 4 & 5) lbs. Sophistication White Leather Sofa 72"W x 31"D x 48"H $ $1, $ lbs. Sophistication White Leather Loveseat 48"W x 31"D x 48"H $ $ $ lbs. Sophistication White Leather Chair 27"W x 31"D x 48"H $ $ $ lbs. Sophistication White Leather Corner 31"Square x 48"H $ $ $ lbs. Sophistication White Leather Ottoman 31"Square x 19"H $ $ $ Boca (Pg. 5) lbs. Boca Black Leather Corner 27"W x 27"D x 30"H $ $ $ lbs. Boca Black Leather Armless 22"W x 27"D x 30"H $ $ $ Metro (Pg. 5 & 6) lbs. Metro Black Leather Sofa 85"W x 35"D x 35"H $ $1, $ lbs. Metro Black Leather Loveseat 60"W x 35"D x 35"H $ $ $ lbs. Metro Black Leather Chair 35"Square x 35"H $ $ $ lbs. Metro Black Leather Square Ottoman 40"Square x 17"H $ $ $ lbs. Metro Black Leather Bench Ottoman 60"W x 24"D x 17"H $ $ $ Suave Midnight (Pg. 6) lbs. Suave Midnight Sofa 77"W x 36"D x 33"H $ $ $ lbs. Suave Midnight Loveseat 54"W x 36"D x 33"H $ $ $ lbs. Suave Midnight Chair 32"W x 36"D x 33"H $ $ $ Grammercy (Pg. 6) lbs. Grammercy Charcoal Leather Sofa 82"W x 36"D x 36"H $ $1, $ lbs. Grammercy Charcoal Leather Loveseat 57"W x 36"D x 36"H $ $ $ lbs. Grammercy Charcoal Leather Chair 28"W x 36"D x 36"H $ $ $ lbs. Grammercy Charcoal Leather Corner 36"Square x 36"H $ $ $ Parma (Pg. 7) lbs. Parma Brown Leather Sofa 79"W x 37"D x 36"H $ $1, $ lbs. Parma Brown Leather Loveseat 56"W x 37"D x 36"H $ $ $ lbs. Parma Brown Leather Chair 33"W x 37"D x 36"H $ $ $ lbs. Parma Brown Leather Bench Ottoman 60"W x 24"D x 17"H $ $ $ Montana Mocha (Pg. 7) lbs. Montana Mocha Sofa 79"W x 35"D x 34"H $ $ $ lbs. Montana Mocha Loveseat 57"W x 35"D x 34"H $ $ $ lbs. Montana Mocha Chair 35"Square x 34"H $ $ $ Chandler (Pg. 8) lbs. Chandler Red Leather Sofa 76"W x 37"D x 35"H $ $1, $ lbs. Chandler Red Leather Loveseat 53"W x 37"D x 35"H $ $ $ lbs. Chandler Red Leather Chair 31"W x 37"D x 35"H $ $ $ lbs. Chandler Red Leather Bench Ottoman 60"W x 24"D x 17"H $ $ $ Evoke (Pg. 8 & 9) lbs. Evoke Sofa 81"W x 35"D x 27"H $1, $1, $ lbs. Evoke Chair 33"W x 35"D x 27"H $ $ $ lbs. Evoke Cocktail Table 48"W x 24"D x 18"H $ $ $

81 Page 78 of lbs. Evoke End Table 24"W x 28"D x 25"H $ $ $ lbs. Evoke Cube 18"Square $ $ $ Stage Chairs (Pg. 9 & 10) lbs. Midnight Microfiber Stage Chair 25"W x 26"D x 37"H $ $ $ lbs. Chamois Microfiber Stage Chair 25"W x 26"D x 37"H $ $ $ lbs. Buckskin Microfiber Stage Chair 25"W x 26"D x 37"H $ $ $ lbs. Empire Chair Black Leather 28"W x 32"D x 32"H $ $ $ lbs. Empire Chair White Leather 28"W x 32"D x 32"H $ $ $ lbs. Ibizia Black Leather Chair 31"W x 35"D x 32"H $ $ $ lbs. Ibizia White Leather Chair 31"W x 35"D x 32"H $ $ $ lbs. Tulip Black Fabric Chair 26"W x 27"D x 35"H $ $ $ lbs. Monarch Chair Bright White 28"Square x 30"H $ $ $ Ottomans & Benches (Pg. 10) lbs. Continental White Leather Curved Bench 70"W x 26"D x 19"H $ $ $ lbs. Metro Black Leather Square Ottoman 40"Square x 17"H $ $ $ lbs. Whisper White Leather Square Ottoman 40"Square x 17"H $ $ $ lbs. Grammercy Charcoal Leather Square Ottoman 40"Square x 17"H $ $ $ lbs. Metro Black Leather Bench Ottoman 60"W x 24"D x 17"H $ $ $ lbs. Whisper White Leather Bench Ottoman 60"W x 24"D x 17"H $ $ $ lbs. Chandler Red Leather Bench Ottoman 60"W x 24"D x 17"H $ $ $ lbs. Grammercy Charcoal Leather Bench Ottoman 60"W x 24"D x 17"H $ $ $ lbs. Parma Brown Leather Bench Ottoman 60"W x 24"D x 17"H $ $ $ lbs. Essentials White Leather Storage Ottoman 48"W x 24"D x 20"H $ $ $ lbs. Grammercy Charcoal Leather Round Ottoman 46"Round x 17"H $ $ $ lbs. Whisper White Leather Round Ottoman 46"Round x 17"H $ $ $ lbs. Grammercy Charcoal 1/4 Round Ottoman 34"W x 19"D x 17"H $ $ $ lbs. Whisper White 1/4 Round Ottoman 34"W x 19"D x 17"H $ $ $ Banquettes & Turning Beds (Pg. 11) lbs. Essentials White Banquette (2 pcs) 60"Round x 48"H $1, $1, $ lbs. Whisper White Tufted Leather Banquette (2 pcs) 59"Round x 38"H $1, $1, $ lbs. Grammercy Charcoal Leather Banquette (2 pcs) 59"Round x 38"H $1, $1, $ lbs. Essentials White Leather Turning Bed 96"W x 48"D x 34"H $1, $1, $ Cube Ottomans (Pg. 11 & 12) lbs. Regency Orange Cube 18"Square $ $ $ lbs. Regency Teal Cube 18"Square $ $ $ lbs. Regency Ruby Cube 18"Square $ $ $ lbs. Regency Camel Cube 18"Square $ $ $ lbs. Regency Apple Cube 18"Square $ $ $ lbs. Regency Fuchsia Cube 18"Square $ $ $ lbs. Cube Ottoman White 18"Square $ $ $ lbs. Cube Ottoman Black 18"Square $ $ $ lbs. Cube Ottoman Red 18"Square $ $ $ lbs. Cube Ottoman Green 18"Square $ $ $ lbs. Cube Ottoman Blue 18"Square $ $ $ lbs. Cube Ottoman Purple 18"Square $ $ $ Charged (Pg. 12) lbs. Essentials Turning Bed w/charging Station Insert 96"W x 48"D x 19"H $1, $2, $ lbs. Boca Bright White Corner Charged 27"W x 27"D x 30"H $ $ $ lbs. Boca Bright White Armless Charged 22"W x 27"D x 30"H $ $ $ lbs. Aspen Bar Table Charged 72"W x 26"D x 42"H $ $1, $ lbs. Aspen Cocktail Table Charged 48"W x 24"D x 18"H $ $ $ lbs. White Conference Table Charged 96"W x 43"D x 30"H $1, $1, $ Occasional Tables (Pg. 13, 14, & 15) lbs. Tribeca End Table 24"W x 28"D x 22"H $ $ $ lbs. Tribeca Sofa/Console Table 48"W x 18"D x 30"H $ $ $ lbs. Tribeca Cocktail Table 48"W x 28"D x 19"H $ $ $ lbs. Harmony End Table 24"Round x 22"H $ $ $ lbs. Harmony Sofa/Console Table 52"W x 18"D x 30"H $ $ $ lbs. Harmony Cocktail Table 51"W x 28"D x 18"H $ $ $ lbs. Novel End Table 15"Square x 16"H $ $ $ lbs. Novel Cocktail Table 46"W x 15"D x 16"H $ $ $ lbs. Aria Red End Table 24"W x 20"D x 22"H $ $ $ lbs. Aria Red Cocktail Table 44"W x 20"D x 18"H $ $ $ lbs. Aria Green End Table 24"W x 20"D x 22"H $ $ $ lbs. Aria Green Cocktail Table 44"W x 20"D x 18"H $ $ $ lbs. Aria Blue End Table 24"W x 20"D x 22"H $ $ $ lbs. Aria Blue Cocktail Table 44"W x 20"D x 18"H $ $ $ lbs. Aria Purple End Table 24"W x 20"D x 22"H $ $ $ lbs. Aria Purple Cocktail Table 44"W x 20"D x 18"H $ $ $ lbs. Aria White End Table 24"W x 20"D x 22"H $ $ $ lbs. Aria White Sofa/Console Table 44"W x 20"D x 30"H $ $ $ lbs. Aria White Cocktail Table 44"W x 20"D x 18"H $ $ $ lbs. Aria Charcoal End Table 24"W x 20"D x 22"H $ $ $ lbs. Aria Charcoal Sofa/Console Table 44"W x 20"D x 30"H $ $ $ lbs. Aria Charcoal Cocktail Table 44"W x 20"D x 18"H $ $ $ lbs. London End Table 24"Square x 23"H $ $ $ lbs. London Sofa/Console Table 60"W x 16"D x 34"H $ $ $ lbs. London Cocktail Table 40"Square x 16"H $ $ $

82 Page 79 of lbs. Brooklyn II Square End Table 22"W X 22"D X 20"H $ $ $ lbs. Brooklyn II Round End Table 20"Round X 20"H $ $ $ lbs. Brooklyn II Rect Cocktail Table 42"W X 24"D X 16"H $ $ $ lbs. Brooklyn II Round Cocktail Table 30"Round X 16"H $ $ $ lbs. Vivid End Table 26"Square x 21"H $ $ $ lbs. Vivid Sofa/Console Table 50"W x 24"D x 30"H $ $ $ lbs. Vivid Cocktail Table 50"W x 24"D x 16"H $ $ $ lbs. Club End Table w/ Builtin LED Lighting 22"Square x 18"H $ $ $ lbs. Club Cocktail Table w/ Builtin LED Lighting 44"W x 22"D x 18"H $ $ $ lbs. Rose Table 17"Round x 17"H $ $ $ lbs. Zanzibar Table 17"Square $ $ $ lbs. Cube, Black 24" End Table 24"Square x 21"H $ $ $ lbs. Cube, White 24" End Table 24"Square x 21"H $ $ $ lbs. Cube, Black 24" Cocktail Table 24"Square x 16"H $ $ $ lbs. Cube, White 24" Cocktail Table 24"Square x 16"H $ $ $ lbs. Hylton Table 18"W x 12"D x 28"H $ $ $ lbs. Phoebe Table Yellow 17"Round x 22"H $ $ $ lbs. Phoebe Table Lime Green 17"Round x 22"H $ $ $ lbs. Phoebe Table Rose 17"Round x 22"H $ $ $ lbs. Phoebe Table Gold 17"Round x 22"H $ $ $ lbs. Phoebe Table Teal 17"Round x 22"H $ $ $ Bars & Bar Backs (Pg. 15) lbs. Manhattan Martini Bar 63"W x 29"D x 42"H $1, $1, $ lbs. VIP Frosted Plexi Glow Bar 6' 72"W x 24"D x 42"H $1, $1, $ lbs. VIP Frosted Plexi Glow Bar 4' 48"W x 24"D x 42"H $ $1, $ lbs. Black Bar 2 Shelf 48"W x 16"D x 42"H $ $ $ lbs. White Bar 2 Shelf 48"W x 16"D x 42"H $ $ $ lbs. Blox Bar Back 30"W x 16"D x 86"H $ $ $ lbs. Piazza Bar Back Black 44"W x 12"D x 80"H $ $ $ lbs. Piazza Bar Back White 44"W x 12"D x 80"H $ $ $ Bar Stools (Pg. 16 & 17) lbs. Vienna Stool Gray 17"Square x 39"H $ $ $ lbs. Vienna Stool Orange 17"Square x 39"H $ $ $ lbs. Vienna Stool Teal 17"Square x 39"H $ $ $ lbs. Criss Cross Bar Stool Espresso 15"W x 19"D x 41"H $ $ $ lbs. Criss Cross Bar Stool White 15"W x 19"D x 41"H $ $ $ lbs. Escape Bar Stool Natural Maple 16"Square x 41"H $ $ $ lbs. Silk Back Bar Stool Black 17"W x 18"D x 42"H $ $ $ lbs. Silk Back Bar Stool White 17"W x 18"D x 42"H $ $ $ lbs. Silk Back Bar Stool Blue 17"W x 18"D x 42"H $ $ $ lbs. Silk Back Bar Stool Green 17"W x 18"D x 42"H $ $ $ lbs. Silk Back Bar Stool Purple 17"W x 18"D x 42"H $ $ $ lbs. Silk Back Bar Stool Red 17"W x 18"D x 42"H $ $ $ lbs. Euro Bar Stool Black 22"W x 24"D x 42"H $ $ $ lbs. Hourglass Bar Stool Black 18"W x 20"D x 43"H $ $ $ lbs. Hourglass Bar Stool White 18"W x 20"D x 43"H $ $ $ lbs. Equino Bar Stool Black 15"W x 13"D x 35"H $ $ $ lbs. Equino Bar Stool White 15"W x 13"D x 35"H $ $ $ lbs. Caprice Bar Stool Black 25"W x 26"D x 44"H $ $ $ lbs. Sonic Bar Stool Black 22"W x 23"D x 42"H $ $ $ lbs. Marcus Bar Stool Gunmetal 18"Square x 29"H $ $ $ lbs. Regal Stool Brown Leather 19"W x 24"D x 45"H $ $ $ Café Chairs (Pg. 17 & 18) lbs. Vienna Chair Gray 21"Square x 32"H $ $ $ lbs. Vienna Chair Orange 21"Square x 32"H $ $ $ lbs. Vienna Chair Teal 21"Square x 32"H $ $ $ lbs. Silk Back Armless Chair Black 17"W x 18"D x 34"H $ $ $ lbs. Silk Back Armless Chair White 17"W x 18"D x 34"H $ $ $ lbs. Silk Back Armless Chair Blue 17"W x 18"D x 34"H $ $ $ lbs. Silk Back Armless Chair Green 17"W x 18"D x 34"H $ $ $ lbs. Silk Back Armless Chair Purple 17"W x 18"D x 34"H $ $ $ lbs. Silk Back Armless Chair Red 17"W x 18"D x 34"H $ $ $ lbs. Escape Chair Natural Maple 17"W x 16"D x 32"H $ $ $ lbs. Leslie Chair White 17"W x 21"D x 31"H $ $ $ lbs. Criss Cross Chair Espresso 17"W x 21"D x 35"H $ $ $ lbs. Criss Cross Chair White 17"W x 21"D x 35"H $ $ $ lbs. Sonic Chair Black 20"W x 21"D x 32"H $ $ $ lbs. Elio Chair 17"Square x 33"H $ $ $ lbs. Caprice Chair Black 25"W x 24"D x 32"H $ $ $ lbs. Comet Stack Arm Chair Black 23"W x 22"D x 32"H $ $ $ lbs. Comet Stack Armless Chair Black 19"W x 22"D x 32"H $ $ $ lbs. Regal Dining Chair Brown 19"W x 23"D x 38"H $ $ $ Bar Tables (Pg. 19, 20, & 21 ) lbs. Euro Bar Table Black/Black 30" Round 30"Round x 42"H $ $ $ lbs. Euro Bar Table Black/Black 36" Round 36"Round x 42"H $ $ $ lbs. Silk Bar Table Black/Chrome 30 Round 30"Round x 42"H $ $ $ lbs. Silk Bar Table Black/Chrome 36 Round 36"Round x 42"H $ $ $ Tulip 41 lbs. Silk Bar Table Black/Tulip Base 30 Round 30"Round x 42"H $ $ $

83 Page 80 of lbs. City Bar Table Maple/Black 30" Round 30"Round x 42"H $ $ $ lbs. City Bar Table Maple/Black 36 Round 36"Round x 42"H $ $ $ lbs. Park Ave Bar Table Maple/Chrome 30 Round 30"Round x 42"H $ $ $ lbs. Park Ave Bar Table Maple/Chrome 36 Round 36"Round x 42"H $ $ $ Tulip 41 lbs. Park Ave Bar Table Maple/Tulip Base 30 Round 30"Round x 42"H $ $ $ lbs. Summit Bar Table White/Black 30 Round 30"Round x 42"H $ $ $ lbs. Summit Bar Table White/Black 36 Round 36"Round x 42"H $ $ $ lbs. Blanco Bar Table White/Chrome 30 Round 30"Round x 42"H $ $ $ lbs. Blanco Bar Table White/Chrome 36 Round 36"Round x 42"H $ $ $ Tulip 41 lbs. Blanco Bar Table White/Tulip Base 30 Round 30"Round x 42"H $ $ $ lbs. Blanco Bar Table White/Chrome 24"Square 24"Square x 42"H $ $ $ Tulip 39 lbs. Blanco Bar Table White/Tulip Base 24"Square 24"Square x 42"H $ $ $ lbs. Blanco Rectangle Bar Table White/Chrome 72"W x 24"D x 42"H $ $ $ lbs. Spectrum Bar Table Red 24"Square x 42"H $ $ $ Tulip 39 lbs. Spectrum Bar Table Red Tulip Base 24"Square x 42"H $ $ $ lbs. Spectrum Bar Table Green 24"Square x 42"H $ $ $ Tulip 39 lbs. Spectrum Bar Table Green Tulip Base 24"Square x 42"H $ $ $ lbs. Spectrum Bar Table Blue 24"Square x 42"H $ $ $ Tulip 39 lbs. Spectrum Bar Table Blue Tulip Base 24"Square x 42"H $ $ $ lbs. Spectrum Bar Table Purple 24"Square x 42"H $ $ $ Tulip 39 lbs. Spectrum Bar Table Purple Tulip Base 24"Square x 42"H $ $ $ lbs. Chardonnay Glass & Chrome Bar Table 31"Round x 42"H $ $ $ lbs. Aspen Bar Table 72"W x 26"D x 42"H $ $1, $ Café Tables (Pg. 21 & 22) lbs. Euro Café Table Black/Black 30 Round 30"Round x 29"H $ $ $ lbs. Euro Café Table Black/Black 36 Round 36"Round x 29"H $ $ $ lbs. Silk Café Table Black/Chrome 30 Round 30"Round x 29"H $ $ $ lbs. Silk Café Table Black/Chrome 36 Round 36"Round x 29"H $ $ $ lbs. Park Ave Café Table Maple/Chrome 30 Round 30"Round x 29"H $ $ $ lbs. Park Ave Café Table Maple/Chrome 36 Round 36"Round x 29"H $ $ $ lbs. City Café Table Maple/Black 30 Round 30"Round x 29"H $ $ $ lbs. City Café Table Maple/Black 36 Round 36"Round x 29"H $ $ $ lbs. Summit Café Table White/Black 30 Round 30"Round x 29"H $ $ $ lbs. Summit Café Table White/Black 36 Round 36"Round x 29"H $ $ $ lbs. Blanco Café Table White/Chrome 30 Round 30"Round x 29"H $ $ $ lbs. Blanco Café Table White/Chrome 36 Round 36"Round x 29"H $ $ $ lbs. Blanco Café Table White/Chrome Rectangle 72"W x 24"D x 29"H $ $ $ lbs. Blanco Café Table White/Chrome 24"Square 24"Square x 30"H $ $ $ lbs. Spectrum Café Table Purple 24"Square x 29"H $ $ $ lbs. Spectrum Café Table Red 24"Square x 29"H $ $ $ lbs. Spectrum Café Table Green 24"Square x 29"H $ $ $ lbs. Spectrum Café Table Blue 24"Square x 29"H $ $ $ lbs. Aspen Dining Table 72"W x 30"D x 30"H $ $ $ Office Seating (Pg. 23 & 24) lbs. Tamiri Black Leather High Back Chair 25"W x 27"D x 45"H $ $ $ lbs. Tamiri Black Leather Mid Back Chair 27"Square x 39"H $ $ $ lbs. Tamiri Black Leather Guest Chair 25"W x 26"D x 37"H $ $ $ lbs. Accord Black Leather High Back 25"Square x 44"H $ $ $ lbs. Accord White Leather High Back 25"Square x 44"H $ $ $ lbs. Goal Black Task Chair With Arms 25"Square x 39"H $ $ $ lbs. Goal Black Task Chair Armless 21"W x 25"D x 39"H $ $ $ lbs. Enterprise High Back Black Fabric Conference Chair 25"W x 27"D x 45"H $ $ $ lbs. Enterprise Mid Back Black Fabric Conference Chair 24"W x 26"D x 39"H $ $ $ lbs. Enterprise Guest Black Fabric Conference Chair 25"W x 27"D x 37"H $ $ $ lbs. Goal Black Drafting Stool Arms 25"W x 24"D x 48"H $ $ $ lbs. Goal Black Drafting Stool Armless 21"W x 24"D x 48"H $ $ $ Conference Tables (Pg. 24) lbs. 42" Round Conference Table Black 42" Round x 29"H $ $ $ lbs. 42" Round Conference Table Mahogany 42" Round x 29"H $ $ $ lbs. Conference Rectangle Table 6' Black 72"W x 36"D x 30"H $ $ $ lbs. Conference Rectangle Table 6' Mahogany 72"W x 36"D x 30"H $ $ $ lbs. Conference Rectangle Table 6' Maple 72"W x 36"D x 30"H $ $ $ lbs. Conference Rectangle Table 6' White 72"W x 36"D x 30"H $ $ $ lbs. Conference Rectangle Table 8' Black 96"W x 48"D x 30"H $ $ $ lbs. Conference Rectangle Table 8' Mahogany 96"W x 48"D x 30"H $ $ $ lbs. Conference Rectangle Table 8' Maple 96"W x 48"D x 30"H $ $ $ lbs. Conference Rectangle Table 8' White 96"W x 48"D x 30"H $ $ $ Office Furniture (Pg. 25 & 26) lbs. Computer Kiosk Black 24"Square x 42"H $ $ $ lbs. Computer Kiosk White 24"Square x 42"H $ $ $ lbs. Computer Counter Graphite 48"W x 24"D x 42"H $ $ $ lbs. Computer Desk Graphite 48"W x 24"D x 29"H $ $ $ lbs. 5 Shelf Bookcase Black 36"W x 12"D x 72"H $ $ $ lbs. 5 Shelf Bookcase Mahogany 36"W x 12"D x 72"H $ $ $ lbs. Black Credenza 60"W x 20"D x 29"H $ $ $ lbs. Black Double Pedestal Desk 60"W x 30"D x 29"H $ $ $ lbs. Genoa Storage Credenza Mahogany 2 Drawer 66"W x 20"D x 29"H $ $ $ lbs. Genoa Kneespace Storage Credenza Mahogany 66"W x 20"D x 29"H $ $ $

84 Page 81 of lbs. Genoa Exec. Desk Mahogany Double Pedestal 72"W x 36"D x 29"H $ $ $ lbs. Presidential Kneespace Credenza Mahogany 66"W x 24"D x 29"H $ $ $ lbs. Presidential Executive Desk Mahogany 72"W x 36"D x 29"H $ $1, $ lbs. Presidential File Cabinet Mahogany 36"W x 24"D x 29"H $ $ $ lbs. Vivid Café Square Table Glass 42"Square x 30"H $ $ $ lbs. Vivid Café Rectangle Table Glass 60"W x 36"D x 30"H $ $ $ Brooklyn II Rect Dining Table 60"W x 36 D x 30 H $ $ $ Brooklyn II Round Dining Table 42" Round x 30"H $ $ $ lbs. Aspen Dining Table 72"W x 30"D x 30"H $ $ $ Metal File & Storage Cabinets (Pg. 27) lbs. 2 Drawer Vertical File Letter Size Black 15"W x 25"D x 29"H $ $ $ lbs. 2 Drawer Vertical File Legal Size Black 18"W x 25"D x 29"H $ $ $ lbs. 4 Drawer Vertical File Letter Size Black 15"W x 25"D x 52"H $ $ $ lbs. 4 Drawer Vertical File Legal Size Black 18"W x 25"D x 52"H $ $ $ lbs. 2 Drawer Lateral File Black 36"W x 18"D x 27"H $ $ $ lbs. 2 Drawer Lateral File Black 36"W x 20"D x 29"H $ $ $ lbs. 4 Drawer Lateral File Black 36"W x 18"D x 54"H $ $ $ lbs. Storage Cabinet Black 36"W x 18"D x 72"H $ $ $ Pedestals (Pg. 28) lbs. Display Pedestal 14" x 42" Black 14"Square x 42"H $ $ $ lbs. Display Pedestal 24" x 42" Black 24"Square x 42"H $ $ $ lbs. Display Pedestal 18" x 42" Black 18"Square x 42"H $ $ $ lbs. Display Pedestal 14" x 42" White 14"Square x 42"H $ $ $ lbs. Display Pedestal 14" x 36" Black 14"Square x 36"H $ $ $ lbs. Display Pedestal 24" x 36" Black 24"Square x 36"H $ $ $ lbs. Display Pedestal 14" x 36" White 14"Square x 36"H $ $ $ lbs. Display Pedestal 24" x 36" White 24"Square x 36"H $ $ $ lbs. Display Pedestal 14" x 30" Black 14"Square x 30"H $ $ $ lbs. Display Pedestal 24" x 30" Black 24"Square x 30"H $ $ $ lbs. Display Pedestal 18" x 30" Black 18"Square x 30"H $ $ $ lbs. Display Pedestal 14" x 30" White 14"Square x 30"H $ $ $ lbs. Locking Pedestal Black 24"Square x 42"H $ $ $ lbs. Locking Pedestal White 24"Square x 42"H $ $ $ lbs. London Pedestal 16"Square x 44"H $ $ $ Miscellaneous Items (Pg. 29) lbs. Stanchion Chrome 41"H $82.50 $ $ lbs. Stanchion Rope Red Velour 6' L $45.00 $58.50 $ lbs. Literature Stand Black 14.75"W x 12"D x 53.5"H $ $ $ lbs. Literature Stand Aluminum 14.75"W x 12"D x 53.5"H $ $ $ lbs. Literature Rack Black Metal 10.5"W x 9.5"D x 57"H $ $ $ lbs. Compact Refrigerator White 4.0 Cu Ft 19"W x 21"D x 33.5"H $ $ $ lbs. ipad Stand Black 14.25''W x 41.75''H $ $ $ lbs. ipad Stand Silver 14.25''W x 41.75''H $ $ $ Lighting (Pg. 30) lbs. Brushed Steel Table Lamp White 26"H $ $ $ lbs. Brushed Steel Floor Lamp White 66"H $ $ $ lbs. Brushed Nickel Table Lamp White 29"H $ $ $ lbs. Brushed Nickel Floor Lamp White 60"H $ $ $ lbs. Rubbed Bronze Table Lamp White 28"H $ $ $ lbs. Rubbed Bronze Floor Lamp White 60"H $ $ $ lbs. Brushed Steel Table Lamp Red 26"H $ $ $ lbs. Brushed Steel Floor Lamp Red 66"H $ $ $ lbs. Neutrino Steel Floor Lamp Steel 67"H $ $ $ Company Name Total Product $ Late Fee % $ Sub Total $ events@valleyexpodisplays.com Sales Tax % $ Total Amount Due $ Fax Online Credit Card Type Street Address Credit Card # City Card Holder State Expiration Date Security Code Zip Code Name / Date of Show Booth Number Contact Name Date Address Contact Cell Fax # Special Instructions: DO NOT MAIL ORDER FORM / Fax Form / Online ONLY Signature

85 Page 82 of Rules and Regulations for Exhibit Space Rental Automation Fair has a long history of creativity and a culture of making the environment enjoyable for our customers to come and learn about the wide variety of products and services from our partners. We want to continue that tradition while making sure we conduct our business in a responsible fashion.

86 Page 83 of 108 AUTOMATION FAIR BYLAWS I. Exhibitor must be an eligible partner from within the Rockwell Automation PartnerNetwork (Strategic Alliance Partners, Encompass Partners, Solution Partners, and OEM Program Partners). Manufacturers representatives or distributors of the exhibiting partner are not permitted to exhibit without prior approval by partner program management. Additionally, trade press, universities and other organizations with close affiliation to Rockwell Automation may exhibit with prior approval by Exposition Management. The term Exhibitor will be defined as any eligible partner or other party approved in advance by Exposition Management to exhibit at the Automation Fair. II. All exhibitor royalties, exhibit membership, license fees and quarterly reports, as may be required under the applicable Rockwell Automation partner program, must be paid in full and the Exhibitor must be in good standing prior to exhibiting at the Automation Fair. III. This is a Rockwell Automation-sponsored event; therefore it is required that Rockwell Automation equipment will be prominently displayed. No exhibit should include or promote products outside of Allen-Bradley, Rockwell Software, or Encompass referenced products. Exposition Management must approve any exceptions prior to Automation Fair. Please refer to the PartnerNetwork Exhibitor Guidelines for more details. Note: Prior to the opening of Automation Fair, partner booths will be reviewed for appropriate content. We ask for your cooperation in making any changes on site if conflicts arise. IV. Scheduling of any hospitality function or other exhibitorsponsored, distributor-sponsored or sales office-sponsored events during show hours is strictly prohibited. Events before or after show hours are acceptable and encouraged. NOT WITHSTANDING THESE BYLAWS, ROCKWELL AUTOMATION AND ITS EXPOSITION MANAGEMENT MUST NECESSARILY RESERVE THE RIGHT, FOR ANY REASON, TO REFUSE ADMISSION TO, OR PARTICIPATION BY, ANY PARTY OR PRODUCT, OR TO REQUIRE THAT ANY PARTICIPATING PARTY CEASE EXHIBITING ANY PRODUCT DURING THE AUTOMATION FAIR EVENT, INCLUDING THE CLOSING OR REMOVAL OF THE EXHIBITOR S ENTIRE DISPLAY. ROCKWELL AUTOMATION ALSO RESERVES THE RIGHT TO DENY ADMISSION TO, OR TO REQUIRE THE REMOVAL FROM THE AUTOMATION FAIR EVENT OF ANY INDIVIDUAL, AS IT MAY DEEM NECESSARY IN ITS SOLE DISCRETION. 1. SHOW MANAGEMENT Automation Fair is produced by, and is the property of, Rockwell Automation, Inc. ( Rockwell Automation ). The word Exposition Management or Management will be defined as Rockwell Automation, Inc. or its designated agents, committees, or employees. 2. LOCATION OF AUTOMATION FAIR 2018 Pennsylvania Convention Center Philadelphia, PA ( Convention Center ) 3. ASSIGNMENT OF EXHIBIT SPACE Space will be assigned by Exposition Management in accordance with the policy announced at the time display space is offered for reservation. Management reserves the right to relocate display areas for the benefit of the Exhibitor or for the betterment of the Automation Fair. 4. LEASE FEES FOR EXHIBIT SPACE All deposits and payments must be paid on time and in full according to the following schedules: a) Any booth orders placed online before June 1 st, 2018 will require at least 50% of full payment due when display space is requested. Exhibitors will have the option to pay the entire balance in one payment. b) The final 50% balance is due by June 29 th, c) Any booth orders placed online after June 1 st, 2018 will require 100% of full payment due when display space is requested. 5. CANCELLATION OR REDUCTION OF EXHIBIT SPACE a) The application for booth space must be accompanied by a minimum 50% deposit. Booth space applications without required payment or payment arrangements will delay booth space assignment. b) After booth space has been confirmed, a reduction in space will be governed by the same policies as outlined below. Reduction in booth space can result in the relocation of booth space at the discretion of Exposition Management. c) Should an Exhibitor cancel their participation from Automation Fair, the following shall apply: 1) NEW - If an Exhibitor cancels or reduces space more than one-hundred twenty (120) days prior to the opening day of the Automation Fair, the Exhibitor will be assessed a cancellation or reduction penalty equal to 25% of the cost of the original cancelled or reduced space cost.

87 Page 84 of 108 2) NEW - If an Exhibitor cancels or reduces space from onehundred twenty (120) days to thirty (30) days prior to the opening day of Automation Fair, the Exhibitor will be assessed a cancellation or reduction penalty equal to 50% of the cost of the original cancelled or reduced space cost. 3) NEW - If an Exhibitor cancels space within thirty (30) days prior to the opening day of Automation Fair, the Exhibitor will be assessed a cancellation penalty equal to 100% of the original booth space cost. If an Exhibitor reduces the size of their space within thirty (30) days prior to the opening day of Automation Fair, a reduction penalty of 50% of the original contracted booth space cost will be assessed. 4) If an Exhibitor cancels with an outstanding balance due, the Exhibitor remains responsible for the entire balance due, plus reasonable attorney s fees to collect if applicable. Exhibitors will not be permitted to participate in future Automation Fair events until all outstanding balances have been paid. d) No cancellations or reductions of space will be acknowledged unless received in writing by Exposition Management. The date upon which the notice of cancellation or reduction of space is received shall apply as the official date of cancellation or reduction of space. 6. USE OF EXHIBIT SPACE a) In the event the Exhibitor s displays are not installed as of two (2) hours prior to the time set for opening the Automation Fair, or Exhibitor fails to comply with any provisions concerning the use of display space, Management will have the right to take possession of said space and resell the space, or any part thereof, with the original Exhibitor remaining liable for the full, applicable cancellation or reduction penalties as stated in Section 5 of these Rules and Regulations. b) All booth equipment, product samples, demonstrations and distribution of circular or promotional material must be confined to within the physical limits of the Exhibitor s booth. No posting or circulation of material will be permitted outside the Exhibitor s booth. c) No Exhibitor will assign, sublet or share the space assigned to them without the advance approval of the Exposition Management. Exhibitors who plan to use manufacturer s representatives or distributors to staff their booths during the show must provide third party company names to their partner program management for prior approval. d) Exhibitors must display only products or services manufactured or dealt by them in their regular course of business, unless otherwise approved by Exposition Management. Any products displayed that are not from Rockwell Automation or referenced in the Encompass partner program must be approved by partner program management. e) Exhibits which include the generation or reproduction of sound, or utilize any audio-visual or special lighting equipment, must be approved by Exposition Management in advance and must be operated so that the resulting noise or lighting will not annoy or disturb adjacent Exhibitors and their patrons. f) Exhibitors are required to have their exposition space neat and orderly at all times. g) No one under the age of 18 will be permitted on the exhibit floor with the exception of students participating in the Rockwell Automation sponsored Engineering our Future exhibit. Those students (with chaperones) are granted permission to perform within their exhibit area only and are allowed to tour the exhibit floor when accompanied by an approved Rockwell Automation representative. No other students or children under the age of 18 will be allowed on the exhibit floor. 7. DISPLAY REGULATIONS a) All materials within the exhibit booth area including, but not limited to, actual display units, decorative items, furnishings, fabrics, flooring, etc. must meet and comply with all rules and regulations of the Convention Center, and all local, city, state and federal safety, fire, health, electrical, plumbing, and hazardous materials codes and other applicable ordinances and laws. b) In general, inline booth exhibits that are less than 301 square feet may have a maximum exhibit height of eight (8) feet. Islands may have a maximum height of twelve (12) feet for booths that are between 300 and 399 square feet, or a maximum height of eighteen (18) feet for booths that are 400 square feet or greater. c) NEW - APPROVAL AND INSTALLATION OF HANGING SIGNS 1) ALL HANGING SIGNS MUST BE APPROVED, IN ADVANCE, BY EXPOSITION MANAGEMENT NO LATER THAN MONDAY OCTOBER 8 th, Any requests received after this date will not be approved. 2) ALL HANGING SIGNS MUST BE SENT TO THE ADVANCED SHIPPING WAREHOUSE BY FRIDAY OCTOBER 26 th, Hanging banners received after this date will incur a 50% surcharge and will be invoiced by the General Service Contractor. There is no guarantee that any hanging sign received after October 26, 2018 will be assembled and hung, regardless of prior Management approval of drawings. 3) As in previous years, there will be no exceptions allowed to this rule in 2018.

88 Page 85 of 108 d) Hanging signs and graphics are permitted in all island, split island and peninsula booths. Exhibit spaces which are 400 square feet and greater may hang signs and graphics to a maximum height of eighteen (18) feet. Exhibit spaces which are square feet may hang their signs and graphics to a maximum height of 14 feet. End cap, linear and inline booths do not qualify for hanging signs and graphics. All sign heights are measured from the top of the sign to the convention floor. e) The length and width of a sign or banner is not to exceed 50% of corresponding dimension of booth (i.e., 20 x40 peninsula cannot have a sign or banner that is larger than 10 x20 ). The bottom of the sign or banner must not be lower than 10 feet from the ground. f) All hanging signs must have drawings available for inspection by Exposition Management at all times. Drawings must include a signature or stamp of a structural engineer indicating that stress points for hanging the sign have been properly engineered. The signature of an authorized official of the exhibit building company is also required, indicating that the structure is built in compliance with the details and the specifications set forth on the drawing. Hanging material anchor points must be pre-fabricated and ready to use. g) NEW - Exhibitors with unique or special displays, or displays requiring special services not provided in the Exhibitor Service Kit must submit their drawings or needs to the Exhibition Management for prior approval by Monday October 8 th, All double deck exhibits must be reviewed in advance by Exposition Management, regardless of Convention Center policies/procedures. h) Exposition Management retains sole discretion and authority in the placement, arrangement and appearance of all displays. i) All property of the Exhibitor will remain under its custody and control in transit to, from, and within the confines of the Convention Center, subject to the rules and regulations of the Convention Center and the Exposition Management. j) The Exhibitor is responsible for compliance with all rules regulations of the Convention Center and all local, city, state and federal safety, fire, health and other ordinances and laws regarding installation and operation of equipment, display and exhibit materials. All displays, exhibit materials and equipment must be protected by safety guards and fireproofing to prevent fire hazards and personal accidents to visitors. k) Exposition Management promotes creativity in exhibit displays yet adheres to the good neighbor policy. If any structure, demo, sound, lights or activity in an exhibit annoys or disturbs adjacent Exhibitors and their patrons, Exposition Management has the right to change or stop any such disturbance. 8. INSTALLATION AND REMOVAL OF DISPLAYS a) All displays must be erected and completely arranged for viewing by 7 pm on Tuesday November 13 th, 2018 the night before the opening of Automation Fair. b) The deadline for removal of all materials from the Convention Center will be enforced. It is the sole responsibility of each Exhibitor to have materials packed, identified and cleared for shipment by the appropriate deadline published by Exposition Management. c) In the event the Exhibitor does not comply with the removal requirements in Section 8(b) above, then the Exposition Management will have the right to dismantle, dispose of, store, or clear from the premises any display material goods, property or merchandise of an Exhibitor at the Exhibitor s sole expense and without any liability of any kind to the Exposition Management. 9. EXHIBITOR APPOINTED CONTRACTOR An Exhibitor who wishes to use an Exhibitor appointed contractor ( EAC ) shall be solely responsible for the actions and omissions of the EAC. Any third party contractor(s) hired by the Exhibitor must not be offensive to attendees based on their sex, race, national origin, ancestry, religion, age, physical or mental disability, sexual orientation, or attire (i.e. hired models, character actors or organizations). The Exhibitor must request in writing, from Management, prior authorization to use an EAC. This request must contain the following information about the EAC: the company name and primary contact address and phone number, and specific theme details if using an agency for a model/character actor/organization. 10. CARE OF BUILDING AND EQUIPMENT Exhibitors and their agents shall not injure or deface the walls, floor or any part of the Convention Center or any booth materials and equipment of another Exhibitor, contractor or Exposition Management. Exhibitor agrees that if it causes any such damage, the Exhibitor shall be solely liable to the owner of the damaged property. 11. LIABILITY AND INSURANCE During the term of this Agreement, Exhibitor will maintain, at its sole cost and expense, the following insurance coverage, as well as any other policies and/or limits applicable by law in the jurisdiction in which this Agreement applies, for the duration of the event, including loading and unloading dates; a) Workers Compensation Statutory or equivalent in the jurisdiction in which this Agreement applies. b) Employers Liability - $1,000,000 per accident, per employee, per disease.

89 Page 86 of 108 c) Commercial General Liability - $5,000,000 per occurrence combined single limit of liability, $5,000,000 general aggregate which will include but not be limited to: contractual liability, premises liability, and advertising liability. Coverage shall include a premises damage liability limit of $1,000,000. d) Property All Risk Property coverage on any and all materials, supplies, equipment and furnishings brought on site to the Convention Center. On a replacement value basis, including where applicable care, custody and control of other s property: Exhibitor agrees Rockwell Automation and the Convention Center shall not be liable for any damage to the property of Exhibitors, its agents, contractors, employees, or invitees, whether or not entrusted to the employees of the Rockwell Automation, nor for loss of or damage to any property by theft or otherwise resulting from any cause. e) Commercial Automobile Liability For all owned, non-owned and hired vehicles, commercial Automobile Liability coverage with limits not less than $5,000,000 each occurrence combined single limit for bodily injury or death and property damage, including all loading and unloading hazards. f) Exhibitor may use a combination of primary and excess/umbrella policies to meet required limits above. Each insurer must possess a minimum rating of A- in the most current edition of A.M. Best s rating guide and be licensed in the jurisdiction in which this Agreement applies. Deductibles and self-insured retentions are the sole responsibility of the Exhibitor. g) Exhibitor shall name Rockwell Automation, Inc., Pennsylvania Convention Center, the city of Philadelphia, the State of Pennsylvania, and their respective agents, trustees, officers, board members and employees as additional insured on the general liability, auto liability and any applicable excess/umbrella policies. Exhibitor s coverage shall be primary and any insurance possessed by the additional insureds shall be excess and noncontributory. h) Exhibitor shall provide waivers of subrogation for loss or damage against Rockwell Automation, Inc., Pennsylvania Convention Center, the city of Philadelphia, the State of Pennsylvania, and their respective agents, trustees, officers, board members and employees for personal injury (including death), property damage or any other loss on all coverage required under this Agreement except workers compensation. i) Exhibitor is responsible for providing a current and updated certificate of insurance no later than thirty (30) days in advance of the event listing Rockwell Automation Inc., 1201 S 2 nd Street, c/o Commercial Events, Milwaukee, WI as certificate holder. Exhibitor will provide that there will be no cancellation, material change or termination of coverage without thirty (30) days prior written notice to Rockwell Automation. If the Exhibitor fails to provide a certificate of insurance it does not relieve the Exhibitor of the responsibility to maintain the appropriate insurance as required in this section. 12. INDEMNIFICATION Exhibitor will indemnify and hold Rockwell Automation, its successors, assigns, affiliates, and subsidiaries, including their respective directors, officers, employees, agents, representatives, subcontractors, suppliers, and customers, harmless from and against all liabilities, claims, demands, actions, costs, or expenses, by whomever asserted and regardless of nature or kind, including without limitation, for personal injuries (including death) and damage to property, whether in tort or under contract, directly or indirectly, in whole or in part. At Exhibitor's expense, these indemnified parties may elect to defend any such claim, demand, or action, and Exhibitor will be responsible for all costs and expenses incurred by them in connection with the defense, including awarded damages and costs of settlement. 13. LIMITATION OF LIABILITY Rockwell Automation, its successors, assigns, affiliates, and subsidiaries, including their respective directors, officers, employees, agents, representatives, subcontractors, suppliers, and customers, will bear no responsibility for Exhibitor s property due to theft or damage by fire, accident, vandalism, or other cause. Damage to inadequately packed property is Exhibitor s own responsibility. IN NO EVENT WILL ROCKWELL AUTOMATION BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES OF ANY KIND. ROCKWELL AUTOMATION S MAXIMUM AGGREGATE LIABILITY WILL NOT EXCEED THE AMOUNT OF THE LEASE FEE PAID BY EXHIBITOR TO ROCKWELL AUTOMATION. ANY ACTION AGAINST ROCKWELL AUTOMATION MUST BE BROUGHT WITHIN EIGHTEEN (18) MONTHS AFTER THE CAUSE OF ACTION ACCRUES. 14. TAXES Exhibitor shall be responsible for the payment as additional fees, if not paid directly, of all applicable sales taxes in connection with Automation Fair, and for payroll, earnings, withholding, unemployment, social security, Medicare, and similar taxes levied by any federal, state, county or city authority based upon wages paid to any employee (including those designated as Exhibitor appointed contractors ) of Exhibitor and any contractors, subcontractors, sublicensees, and sub-lessees performing work for the Exhibitor within the state of the Convention Center, in connection with such event.

90 Page 87 of FORCE MAJEURE In the event the Convention Center or any part of the exhibit area thereof is unavailable whether for the entire event, or a portion of the event as a result of fire, flood, tempest, or any other such cause or as a result of government intervention, malicious damages, acts of war, strike, lockout, labor dispute, riot, or any other cause or agency over which Rockwell Automation or the Exposition Management has no control, or should Exposition Management decide that because of any such cause it is necessary to cancel, postpone, alter, or re-site the show, or reduce or change the installation time, show time, or dismantle time, Rockwell Automation and the Exposition Management will not be liable for any damages, costs, or losses, direct or indirect, arising as a result thereof.

91 Page 88 of 108 DIRECTIONS TO CONVENTION CENTER Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 From The Northern and Western Suburbs Take I-76 East to Exit 344 for I-676 East. Follow signs for Central Philadelphia. Take I-676 East and exit at Broad Street/Rt. 611 (2nd exit). You will be on Vine Street. Follow Vine Street to 12th Street (4 traffic lights). From I-95 Northbound, Philadelphia International Airport, Baltimore, Washington, and Delaware Take I-95 North to Exit 22 for Central Philadelphia I-676. Stay in the left lane of this exit. Follow signs for 676 West to the 1st exit (Broad Street). This exit brings you up onto 15th St. Get into the left lane and follow the sign for 611/Broad Street and make a left turn on to Vine Street. Follow signs for Vine Street/PA Convention Center. Make a right on to 12th Street. The entrances to the Convention Center are located two blocks ahead at the NE and NW corners of 12th & Arch Streets. From I-95 Southbound, New York, Northern and Central New Jersey Take I-95 South to Exit 22 for Central Philadelphia I-676. Stay in the left lane of this exit. Follow signs for 676 West to the 1st exit (Broad Street). This exit brings you up onto 15th St. Get into the left lane and follow the sign for 611/Broad Street and make a left turn on to Vine Street. Follow signs for Vine Street/PA Convention Center. Make a right on to 12th Street. The entrances to the Convention Center are located two blocks ahead at the NE and NW corners of 12th & Arch Streets. From the Pennsylvania Turnpike Follow Pennsylvania Turnpike to Exit 20 / I-476 (Mid County Interchange). Take I-476 South to Exit 16/ I-76E Philadelphia. Stay on I-76 East for approximately 12 miles. Exit at 344 / I- 676 East. Take I-676 East and exit at Broad Street/Rt. 611 (2nd exit). You will be on Vine Street. Follow Vine Street to 12th (4 traffic lights). Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

92 Page 89 of 108 DIRECTIONS TO CONVENTION CENTER Pennsylvania Convention Center Philadelphia, PA November 14-15, 2018 ADVANCE PRICE DEADLINE: October 17, 2018 From the New Jersey Turnpike (New York) Take the NJ Turnpike to exit 4 (Philadelphia / Camden Exit). Get onto 73 North and follow it to 38 West. Take 38 West following the signs directing to the Benjamin Franklin Bridge (The Bridge is 30 West), crossing into Philadelphia. Follow the signs for Convention Center (this is Vine Street). Go approximately 6 blocks, make a left turn onto 12th Street. From PA 309 Take PA 309 South to Pennsylvania Turnpike. Follow Turnpike West to Exit Mid County Interchange / 476S Chester. Take I-476 South to Exit 16 / I-76 Philadelphia. Stay on I-76 East for approximately 12 miles. Exit at 344 / I- 676 East. Take 676 East and exit at Broad Street/Rt. 611 (2nd exit). You will be on Vine Street. Follow Vine Street to 12th Street (4 traffic lights). From US 611 Take US 611 South into Philadelphia (611 South becomes Broad Street). Go South on Broad Street for approximately 8 miles. In Center City, turn left onto Vine Street / Local Traffic. Follow Vine Street to 12th Street (2 traffic lights). From New Jersey and Atlantic City Area Take Atlantic City Expressway to 42 North. Follow 42 North to the Benjamin Franklin Bridge (Rt. 676), crossing into Philadelphia. Follow the signs for Convention Center (this is Vine Street). Go approximately 6 blocks, make a left turn onto 12th Street. Click Here for Online Ordering 4950 AMERICAN ROAD ROCKFORD, IL PHONE: FAX:

93 Page 90 of 108 Exhibit Services Reliable trade show shipping services

94 Page 91 of 108 The show must go on! YRC Freight is ready to customize transportation solutions for any exhibit shipment, any size load, delivering great service, savings and simplicity. After the show, specify YRC Freight for the move out on the materials handling agreement (MHA), then give us a call. We ll take it from there. And if others handle your trade show shipping, remember to tell them about YRC Freight savings and service. Delivering confidence at the show n 100% inbound service guarantee* at no additional cost n On-site Exhibit managers monitor your inbound shipments for on-time, smooth move ins n Time-Critical expedited n Comprehensive North American coverage and online visibility Giving you more for your money n Lowest trade show shipping fees in the industry n 30 days free storage prior to the show; a great way to save when moving from show to show n No detention fees at trade shows n No extra fees for weekend/after-hour pickups Keeping it simple for you n Exhibit customer service representatives available 24/7; call EXPO (3976) n Around-the-clock assistance with quotes, bookings, tracking or expediting n Single-shipment transportation for your entire display n Online shipment visibility throughout the move on my.yrcfreight.com * Subject to applicable Tariffs and Rules and Conditions publications. yrcfreight.com EXPO (3976) Live Chat Copyright 2014 YRC Worldwide Inc. Printed in U.S.A. YRC /14

95 IF PAYING BY CHECK RETURN THIS FORM TO: PCCA/SMG ORDER PROCESSING 1101 ARCH STREET PHILADELPHIA, PA COMPLETED FORM TO: ELECTRIC SERVICE & ELECTRIC LABOR INSTALLATION ORDER FORM (PLEASE READ PCC/SMG TERMS & CONDITIONS ATTACHED) Exhibiting Firm: Booth #: Bill To Address: Event: City: State: Zip: Exhibitor Contact Name: Title: Phone: _ On-Site Contact Name: Phone: CREDIT CARD AUTHORIZATION REQUIRED FOR ADVANCED ORDERS, ON-SITE CHARGES, LABOR AND MATERIALS Visa MasterCard Amex Account Number: Exp. Date: Card Holder s Name: Check enclosed #: Amount: STANDARD 110V/120V SERVICE Service originates at back center of Inline & Peninsula Booths. QTY SERVICE ADVANCED STANDARD TOTAL 500watts $ $ watts $ $ watts $ $ HR. 500watts $ $ HR. 1000watts $ $ HR. 2000watts $ $ OTHER CALL CALL Signature: RENTAL LIGHTS Price includes Power, Installation/Dismantle and a One-Time Focus on Straight Time. QTY SERVICE ADVANCED STANDARD TOTAL 4 Track w/3-90w Lamps $ $ Track w/3-90w lamps $ $ Each additional track lamp $20.00 $30.00 LED Clamp Stem Light $ $ Parcan Overhead Light $ $ V MOTORS/MACHINERY SERVICE Labor and material charges will apply. QTY SERVICE ADVANCED STANDARD TOTAL 20amp 1Phase $ $ amp 1Phase $ $ amp 3Phase $ $1, amp 3Phase $1, $1, HR 20amp 1Phase $ $ HR 30amp 1Phase $ $ HR 60amp 3Phase $1, $1, HR 100amp 3Phase $1, $2, OTHER CALL CALL Page 92 of 108 ROCKWELL AUTOMATION ADVANCED RATE DEADLINE: OCTOBER 15, 2018 ELECTRICAL LABOR RATES PER HOUR: Straight Time: 8am-4:30pm Monday-Friday Regular Rate: $ Show Site Rate: $ Over Time: 6am-8am after 4:30pm Monday-Friday / All Day Saturday Regular Rate: $ Show Site Rate: $ Double Time: All Day Sunday / Recognized Holidays Regular Rate: $ Show Site Rate: $ Installation/Dismantle labor is scheduled and billed at rates in accordance with show move-in/out. The minimum charge of ½ hour installation will apply. Dismantle labor of floor power will be automatically charged at 50% of the total installation hours. Dismantle of overhead services, signs, truss, motors and lights will be billed on actual labor hours incurred. Unsupervised Installation Supervised Installation by Exhibitor/Name: Cell: NO YES EAC or I&D Company: On-Site POC: Cell: PLEASE CHECK ALL WORK REQUIRED BELOW. Only PCC/SMG electricians under IBEW Jurisdiction perform the electrical installations listed below. Material charges will apply where applicable, i.e. extension cords/feed cables/cord caps, lift charges, etc. Distribution of cords/cables under 208v/480v Service Connection Dedicated Daily Booth Labor carpet/flooring from point of origin (submit schedule if necessary) Date: Time: Network Data Cabling Distribution & Terminations Booth Lighting YES NO Stem Lights & Electrical Signage Install Date: Time: Dismantle Date: Time: Date: Time: Hardwire Lights & Electrical Equipment Truss/Motors/Lights Exhibitor Rental PCC/SMG Rental Install Date: Time: Dismantle Date: Time: Date: Time: Coax VGA Audio Signal Low Voltage Terminations Suspended Electrical Signs w/lights and/or Motors Install Date: Time: Dismantle Date: Time: Computer Installation & Dismantle Close Circuit TV, Security Cameras/Monitors Satellite Dish Assembly / Dismantle & Cabling Disconnect/Connect Vehicle Battery Disconnect Date: Time: Reconnect Date: Time:

96 Page 93 of 108 ANNOUNCING OUR NEW LIGHTING PRODUCTS AVAILABLE FOR RENTAL What attracts visitors to your booth? Excellent exhibit design and a marketing strategy. We think the most important aspect of the marketing strategy is the lighting. To help draw visitors and business to your booth we are pleased to offer two new lighting products available for rental: Skanda LED Clamp on Light, the Nora Track Light and PARCAN Overhead Light. The clamp on lights are useful if you are trying to create smaller spotlights on specific posters, the track lights are useful if you are trying to highlight specific products within your booth and our PARCAN Overhead Light is useful if you want to add additional overhead lighting to your booth or spotlight a hanging sign, etc. With these ideas in mind, we think you ll be better able to market your product or service and attract attention! *RENTAL PRICE INCLUDES POWER, INSTALLATION/DISMANTLE AND A ONE-TIME FOCUS* SKANDA LED CLAMP ON LIGHT Super Bright LED 200watts cool white Clamps Classic Black Only NORA TRACK LIGHT 3 Fully Enclosed Lamps Additional Lamps 4ft & 8ft. Lengths of Track Classic Black Only PARCAN OVERHEAD LIGHT Rugged Die-Cast Aluminum Construction Source Four Optical Technology Superior Brightness Light attracts people, it shows the way, and when we see it in the distance, we follow it. Ricardo Legorreta - architect Prices Effective

97 Page 94 of 108 UTILITIES SERVICES RIGGING FAQ SHEET Rental of Truss and Motors (including its equipment) is proprietary to PCC/SMG. Installation of all truss, motors and its equipment is performed by SMG Electricians. Labor is not included in the rental price See menu of sample pricing below. Rental Rates are based on one (1) week installments. SILVER TRUSS ALL LENGTHS AVAILABLE 12 Silver Truss 10 - $ $ $ $ $70.00 Corner Blocks $ Silver Truss 10 - $ $ $ Corner Blocks $ STANDARD MOTOR RENTALS 1/4 TON -$325 1/2 TON-$350 1 TON - $ BLACK TRUSS AVAILABLE AT AN ADDITONAL COST 12 Black Truss 10 - $ $ $ $ $90.00 Corner Blocks $ Black Truss 10 - $ $ $ Corner Blocks $ ROTATING MOTOR $250/RENTAL CUSTOM RIGGING ESTIMATES ARE PREFEERED AND PROVIDED UPON REQUEST TO CMCSHANE@PACONVENTION.COM WITH RENDERING AND/OR RIGGING PLANS. A 50% deposit is required with approved Rigging Estimate. All Electrical Suspended Elements that require electric for lights and/or rotating motors must be installed by SMG Electricians. All Suspended Elements that are dead hung (no lights and/or motors) are the Decorator s responsibility. Signage weighing 150lbs or more will traditionally require a motor(s) to be installed by SMG Electricians. Lights for truss can be supplied by exhibitor or 3rd party vendor, but must be installed by SMG Electricians. Operating of all Motor Controllers is performed by SMG Electricians. All booths using an EAC or Decorator supplied labor will need SMG Electricians to wire or install booth lighting. All rules apply to dismantle and move-out. For more information contact Utilities Services at utilities@paconvention.com or Effective 5/1/18

98 Page 95 of 108 IF PAYING BY CHECK RETURN THIS FORM TO: PCCA/SMG ORDER PROCESSING 1101 ARCH STREET PHILADELPHIA, PA COMPLETED FORM TO: PHONE: (215) FAX: (215) WATER & COMPRESSED AIR SERVICE ORDER (Please read Terms and Conditions attached) ROCKWELL AUTOMATION ADVANCED DEADLINE DATE: OCTOBER 15, 2018 Exhibiting Firm: Billing Address: Booth No.: Event: City: State: Zip: Exhibitor Contact Name: Title: Phone: _ CREDIT CARD AUTHORIZATION REQUIRED for advance order, on-site charges, labor, and materials Visa MasterCard Amex Account Number: Exp Date: Print Card Holder's name: Check enclosed #: Signature: Amount: Rate includes installation to back center of in-line and peninsula booths only. Labor & material required for distribution to other locations, Island booths and connection to equipment. QTY. SERVICE ADVANCED STANDARD TOTAL 1 / 2 Main Airline w/ Shutoff $ $ Additional 1 / 2 Airline Connection $ $ / 2 Water line w/ Shutoff $ $ / 2 Additional Water line w/ Shutoff $ $ / 4 Drain line $ $ / 4 Additional Drain line $ $ Water Fill & Drain up to 200 gal. $ $ Additional 100 gal. Water Fill & Drain Labor Additional $70.00 $90.00 Prep Sink (Water & Drain Additional) $ $ Basic Hot Water Heater Package (Includes hot/cold water lines, drain line, water heater, plumbing & electric labor at column location only).other locations and various setups will incur additional charges. $1, $1, Sub Total 8% Sales Tax TOTAL PLUMBING LABOR RATES: Weekdays 8am - 4:30pm $147.00per hour Weekdays after 4:30pm & all day Saturday $ per hour All day Sunday and Holidays $ per hour AUTHORIZED TO LAY LINES UNDER CARPET WITHOUT EXHIBITOR SUPERVISION PER ATTACHED FLOOR PLAN PROCEED UNDER SUPERVISION DATES AND TIMES INDICATED BELOW: Install lines under carpet Date: Time: Final Connection to equipment Date Time:

99 Page 96 of 108 PCCA/SMG WATER & COMPRESSED AIR SERVICE ORDER TERMS & CONDITIONS 1. INSTRUCTION FOR COMPLETING ORDER FORM a. Order must be typed or clearly printed, illegible forms will delay processing. b. Services requested at location other than back of booth must include proper forms and diagrams. c. For services and equipment not listed on the service order form, call the PCCA/SMG Utility Services Department for availability and quotes at (215) or 2. PAYMENT TERMS & CONDITIONS a. Full payment is due with service order. Credit Card Pre-authorization for on site charges, labor and materials is required when placing an order. Acceptable forms of payment are: company check (drawn on a U.S. bank) payable to Pennsylvania Convention Center Authority, (PCCA) and accepted credit cards. Service orders will not be processed without payment. Exhibiting firms with outstanding balances from prior events must submit payments, otherwise services will not be provided. b. Advanced Rates will be applicable to service orders received with payment in full by the deadline date noted on the front of this form. c. Standard Rates will be applicable to service orders received after the Advanced Rate Deadline or orders received without payment. d. Third party billing is available upon request. Please contact the PCCA/SMG Finance Department at for approval. e. Outstanding balance for services will be automatically billed to the credit card on file. f. Credit will not be given for service installed and not used. g. Cancellation of services must be received by PCC/SMG Utility Services Department 21 days prior to the event. Services cancelled without 21 days prior written notice are subject are subject to a cancellation fee of 25%. h. A $25.00 handling charge will be assessed for returned checks due to insufficient funds. i. Rates are based on current wages and are subject to change without notice. j. Claims regarding services provided by PCCA/SMG will not be considered unless filed by customer issued prior to the close of show. k. Refunds of overpayments and dispute resolutions will be issued by submitting requests to PCCA/SMG Finance Department within 30 days of the close of final invoicing. l. For unpaid balances on pre-approved invoices, terms will be net, due and payable upon receipt of invoice. Effective 30 days after invoice date, any unpaid balances will bear a FINANCE CHARGE at the lesser of the maximum rate allowed by law, or 1.5% per month by law. The finance charge shall automatically be reduced to the maximum rate allowed. Any excess finance charge received by the PCCA/SMG shall be applied to reduce the principal unpaid balance or refunded to the payer. This payment Terms & Conditions agreement shall be governed by and construed in accordance of the laws of the Commonwealth of Pennsylvania m. International exhibitors are required to make 100% pre-payment for services. Payment may be made by check in U.S. funds drawn on a U.S. bank or by approved credit card. n. For companies exempt from sales tax, PCCA/SMG requires an exemption certificate for the Commonwealth of Pennsylvania. Resale certificates are not valid unless re-billing charges to customers. 3. EXPLANATION OF SERVICE a. Rates shown for services are for the duration of event and includes installation to exhibitor booth in the most convenient manner, in most cases to the back center of an in line booth or perimeter of island and peninsula booths. All services originate from the floor unless otherwise noted or requested. b. Advance orders will be installed based on the schedule determined by the General Service Contractor and/or Show Management. On site orders will be processed in the order that they are received at the PCCA/SMG Utility Services Desk. c. Electrical services will be turned off one hour after the close of show each day and restored one hour prior to opening. d. 24 hour electrical service is available for refrigeration, electronics and circulation pumps. 4. RULES & REGULATIONS FOR SERVICES a. Services provided may not be shared by multiple exhibits. b. All materials and equipment furnished by PCCA/SMG and/or its sub-contractors shall remain the property of PCCA/SMG and/or it's Sub-contractors. c. All rental equipment furnished by PCCA/SMG not left in the booth at the close of the show will be charged an additional 75% of the original rental equipment charge. d. PCCA/SMG and/or its sub-contractors are authorized to cut floor coverings to gain access to utility floor ports and permit the installation of service. e. PCCA/SMG or its sub-contractors are not responsible for interruption or fluctuation of services. e. All equipment provided by customer shall be compliant with the National and Philadelphia Electrical and Building Codes and PCCA/SMG safety standards. All equipment is subject to inspection and approval by PCCA/SMG prior to connection to service. f. Customer is responsible for any lost or damaged equipment supplied by the PCCA/SMG.

100 RETURN THIS FORM TO: PCC ORDER PROCESSING 1101 Arch Street Philadelphia, PA Phone: Fax: Page 97 of 108 Rockwell Automation ADVANCED RATE DEADLINE: OCTOBER 15, 2018 WIRED INTERNET SERVICE ORDER (Please read terms and conditions on reverse side) Exhibiting Firm: Address: Booth No.: Event: City: State: Zip: Exhibitor Contact Name: Title: Phone: ( ) FAX: ( ) CREDIT CARD AUTHORIZATION REQUIRED for advance order, on-site charges, labor, and materials [ ] Visa [ ] MasterCard [ ] Amex Account Number: Exp Date: Print Card Holder's name: Check enclosed #: Signature: Amount: INTERNET SERVICES (internet upload and download speeds are the same and an IP address is required for each device connected to the internet) QTY SERVICE ADVANCE STANDARD TOTAL Dedicated Public Internet Service will accommodate internet functions such as: viewing streaming video, surfing the internet, viewing websites and checking . These services provide real IP s, there are no blocked ports and they will support multiple users with VPN connections. Dedicated Public 9Mb includes (10) IP addresses, can expand to (28) total IP addresses $9, $11, Dedicated Public 6Mb includes (10) IP addresses, can expand to (28) total IP addresses $7, $8, Dedicated Public 3Mb includes (6) IP addresses, can expand to (11) total IP addresses $4, $5, Dedicated Public 1.5Mb includes (6) IP addresses, can expand to (11) total IP addresses $2, $2, Additional Dedicated Public IP address $ $ Private Internet Service will accommodate general internet functions such as: viewing streaming video, surfing the internet, viewing websites and checking . These services will not support multiple users with VPN connections. Private 9Mb includes (4) IP addresses $1, $2, Private 6Mb includes (4) IP addresses $1, $1, Private 3Mb includes (4) IP addresses $1, $1, Additional Private IP address $ $ Dry VLAN connection This service is not internet access. This service is inclusive of the origination and destination points. Origination Point Destination Point Please Note: Higher bandwidth options are available. Please contact the Show Services department for a quote or showservices@paconvention.com Internet service originates at back of booth; please attach the booth floor plan if primary service is required in a location other than back of booth. Data cabling to multiple locations is installed by the event electricians; please contact Utility Services to order this labor ( or utilities@paconvention.com). TO ORDER ON-LINE VISIT OUR WEBSITE AT $ $ SUB TOTAL 8% SALES TAX TOTAL INTERNET SERVICE ORDER TERMS & CONDITIONS

101 Page 98 of INSTRUCTION FOR COMPLETING ORDER FORM a. Order must be typed or clearly printed, illegible forms will delay processing. b. Services requested at location other than back of booth must include floor plan. c. For services and equipment not listed on the service order form, call the PCC Show Services Department for availability and quotes at (215) or 2. EXPLANATION OF SERVICE a. Rates shown for services are for the duration of event and includes installation to exhibitor booth in the most convenient manner, in most cases to the back center of an in line booth or perimeter of island and peninsula booths. All services originate from the floor unless otherwise noted or requested. b. Advance orders will be installed based on the schedule determined by the General Service Contractor and/or Show Management. On site orders will be processed in the order that they are received at the PCC Show Services Desk. 3. RULES & REGULATIONS FOR INTERNET SERVICE a. Services provided may not be shared by multiple exhibits. b. All materials and equipment furnished by Pennsylvania Convention Center and/or its sub-contractors shall remain the property of Pennsylvania Convention Center and/or its sub-contractors. c. Pennsylvania Convention Center and its sub-contractors are authorized to cut floor coverings to gain access to utility floor ports should this be required during installation. d. The use of any wireless devices including, but not limited to, wireless routers and switches that interfere with the PCC wireless frequency is prohibited. e. The PCC does not guarantee the routing, throughput or performance expressed or implied of any data circuits with regards to Internet access, network backbones beyond any facility we service. f. The PCC will not supply security services such as firewalls etc. for any data circuit we provide. It is the responsibility of exhibitors or customers to provide such security measures. g. The PCC requires that all devices accessing the PCC Network have the latest virus scan software, windows security updates and any other precautions necessary to protect yourself and others from viruses, malicious programs and other disruptive applications. Any device that adversely impacts PCC s network will be disconnected from the network with or without prior notice at PCC s discretion. Additional charges may apply for troubleshooting diagnosis and/or problem resolution. h. All Internet and equipment will be collected within 1 hour after close of show; exhibitors are responsible for loss or damage to PCC equipment until PCC staff receives said equipment. i. It is the responsibility of the client to provide the following: 1. Standard 10BaseT Ethernet adapter (RJ 45 Interface) for each computer. 2. Network Driver: TCP/IP 3. Proper configuration of computer equipment for TCP/IP connection. 4. Electrical service for your booth, room, or service location. 4. PAYMENT TERMS & CONDITIONS a. Full payment is due with service order. Credit Card Pre-authorization for onsite charges is required when placing an order. Acceptable forms of payment are: company check (drawn on a U.S. bank) payable to Pennsylvania Convention Center (PCC), and accepted credit cards. Service orders will not be processed without payment. Exhibiting firms with outstanding balances from prior events must submit payments, otherwise services will not be provided. b. Advance rates will be applicable to service orders received by PCC 21 days prior to the first day of event move-in or the deadline date noted on front of this form. Service orders received less than 21 days prior to the first day of move-in and on site will be billed at the standard rate. c. Third party billing is available upon request. Please contact the PCC Finance Department at for approval. d. Outstanding balance for services will be automatically billed to the credit card on file. e. Credit will not be given for service installed and not used. Services canceled without 21 day prior written notice are subject to a cancellation fee of 25%. f. A $25.00 handling charge will be assessed for returned checks due to insufficient funds. g. Cancellation of services must be received by PCC Show Services Department 21 days prior to the event. h. Claims regarding services provided by PCC will not be considered unless filed by customer issued prior to the close of show. i. Refunds of overpayments will be issued by submitting request to PCC Finance Department within 30 days of the close of final invoicing. j. For unpaid balances on pre-approved invoices, terms will be net, due and payable upon receipt of invoice. Effective 30 days after invoice date, any unpaid balances will bear a FINANCE CHARGE at the lesser of the maximum rate allowed by law, or 1.5% per month by law. The finance charge shall automatically be reduced to the maximum rate allowed. Any excess finance charge received by the PCC shall be applied to reduce the principal unpaid balance or refunded to the payer. This payment Terms & Conditions agreement shall be governed by and construed in accordance of the laws of the Commonwealth of Pennsylvania k. International exhibitors are required to make 100% pre-payment for services. Payment may be made by check in U.S. funds drawn on a U.S. bank or by approved credit card. l. For companies exempt from sales tax, PCC requires an exemption certificate for the Commonwealth of Pennsylvania. Resale certificates are not valid unless re-billing charges to customers.

102 Page 99 of 108 RETURN THIS FORM TO: PCC ORDER PROCESSING 1101 Arch Street Philadelphia, PA Phone: Fax: Rockwell Automation ADVANCED RATE DEADLINE: OCTOBER 15, 2018 TELECOMMUNICATIONS SERVICE ORDER (Please read terms and conditions on reverse side) Exhibiting Firm: Address: Booth No.: Event: City: State: Zip: Exhibitor Contact Name: Title: Phone: ( ) FAX: ( ) CREDIT CARD AUTHORIZATION REQUIRED [ ] Visa [ ] MasterCard [ ] Amex Account Number: Exp Date: Print Card Holder's name: Check enclosed #: Signature: Amount: PHONE SERVICE (unlimited local and long distance calls at no additional charge) QTY SERVICE ADVANCE STANDARD TOTAL Single Line Telephone Service $ $ Credit Card Line/Fax Line $ $ Multi Line Telephone Service $ $ PHONE EQUIPMENT & FEATURES QTY SERVICE ADVANCE STANDARD TOTAL Conference Phone (Single Line Telephone Service must be ordered) $ $ Voice Mail $25.00 $25.00 Other: Phone Service originates at back of booth; please attach a floor plan if service is required in a location other than back of booth. SUB TOTAL 8% SALES TAX TOTAL TO ORDER ON-LINE VISIT OUR WEBSITE AT

103 Page 100 of 108 TELECOMMUNICATIONS SERVICE ORDER TERMS & CONDITIONS 1. INSTRUCTION FOR COMPLETING ORDER FORM a. Order must be typed or clearly printed, illegible forms will delay processing. b. Services requested at location other than back of booth must include floor plan. c. For services and equipment not listed on the service order form, call the PCCA Show Services Department for availability and quotes at (215) or 2. EXPLANATION OF SERVICE a. Rates shown for services are for the duration of event and includes installation to exhibitor booth in the most convenient manner, in most cases to the back center of an in line booth or perimeter of island and peninsula booths. All services originate from the floor unless otherwise noted or requested. b. Advance orders will be installed based on the schedule determined by the General Service Contractor and/or Show Management. On site orders will be processed in the order that they are received at the PCC Show Services Desk. 3. RULES & REGULATIONS FOR SERVICES a. Services provided may not be shared by multiple exhibits. b. All materials and equipment furnished by PCC and/or its sub-contractors shall remain the property of PCC and/or its sub-contractors. c. PCC and/or its sub-contractors are authorized to cut floor coverings to gain access to utility floor ports and permit the installation of service. d. PCC or its sub-contractors are not responsible for interruption or fluctuation of services. e. All equipment provided by customer shall be compliant with the National and Philadelphia Electrical and Building Codes and PCC safety standards. All equipment is subject to inspection and approval by PCC prior to connection to service. f. Customer is responsible for any lost or damaged equipment supplied by the PCC. 4. PAYMENT TERMS & CONDITIONS a. Full payment is due with service order. Credit Card Pre-authorization for onsite charges is required when placing an order. Acceptable forms of payment are: company check (drawn on a U.S. bank) payable to Pennsylvania Convention Center (PCC), and accepted credit cards. Service orders will not be processed without payment. Exhibiting firms with outstanding balances from prior events must submit payments, otherwise services will not be provided. b. Advance rates will be applicable to service orders received by PCC 21 days prior to the first day of move-in or the deadline date noted on front of this form. Service orders received less than 21 days prior to the first day of move-in and on site will be billed at the standard rate. c. Third party billing is available upon request. Please contact the PCC Finance Department at for approval. d. Outstanding balance for services will be automatically billed to the credit card on file. e. Credit will not be given for service installed and not used. Services canceled without 21 day prior written notice are subject to a cancellation fee of 25%. f. A $25.00 handling charge will be assessed for returned checks due to insufficient funds. g. Claims regarding services provided by PCC will not be considered unless filed by customer issued prior to the close of show. h. Refunds of overpayments will be issued by submitting request to PCC Finance Department within 30 days of the close of final invoicing. i. For unpaid balances on pre-approved invoices, terms will be net, due and payable upon receipt of invoice. Effective 30 days after invoice date, any unpaid balances will bear a FINANCE CHARGE at the lesser of the maximum rate allowed by law, or 1.5% per month by law. The finance charge shall automatically be reduced to the maximum rate allowed. Any excess finance charge received by the PCC shall be applied to reduce the principal unpaid balance or refunded to the payer. This payment Terms & Conditions agreement shall be governed by and construed in accordance of the laws of the Commonwealth of Pennsylvania j. International exhibitors are required to make 100% pre-payment for services. Payment may be made by check in U.S. funds drawn on a U.S. bank or by approved credit card. k. For companies exempt from sales tax, PCC requires an exemption certificate for the Commonwealth of Pennsylvania. Resale certificates are not valid unless re-billing charges to customers.

104 Page 101 of 108 RETURN THIS FORM TO: PCCA ORDER PROCESSING Rockwell Automation 1101 Arch Street ADVANCED RATE DEADLINE: Philadelphia, PA Phone: (215) OCTOBER 15, 2018 Fax: (215) EXHIBITOR AUDIO VISUAL SERVICE ORDER (Please read terms and conditions that appear on reverse side) Exhibiting Firm: Address: Booth No.: Event: City: State: Zip: Exhibitor Contact Name: Title: Phone: ( ) FAX: ( ) CREDIT CARD AUTHORIZATION REQUIRED for advance order, on-site charges, labor, and materials [ ] Visa [ ] MasterCard [ ] Amex Account Number: Exp Date: Print Card Holder's name: Check enclosed #: Signature: Amount: AUDIO VISUAL SERVICES (RATES LISTED BELOW ARE FOR EXHIBIT BOOTHS FOR THE ENTIRE LENGTH OF THE SHOW) ADVANCE STANDARD PRESENTATION EQUIPMENT QTY RATE RATE 6 Tripod Screen $75.00 $ Tripod Screen $ $ or 54 Projection Video Cart w/ Drape $63.00 $79.00 Flipchart w/ Markers and Pad $75.00 $94.00 LCD FLAT PANEL DISPLAYS 20 LCD Flat Panel Monitor (Data ONLY) not wallmountable $ $ LCD Flat Panel Display (Data & Video) Black $ $ HD Flat Panel Display (Data & Video) Black $ $ HD Flat Panel Display (Data & Video) Black $ $ HD Flat Panel Display (Data & Video) Black $ $ HD LED Display ( Data & Video) Black $ $ Larger LCD Flat Panel Displays available Call for Pricing Floor Stand or Table Top Stand (circle one) $ $ Wall Mounting. Please Call for Pricing.* LCD PROJECTORS 4,500 Lumen LCD Projector $ $ LAPTOP COMPUTER Laptop Computer with MS Office $ $ AUDIO/VIDEO EQUIPMENT 160 Watt Self Powered Full Range Speaker w/stand $ $ Watt Self Powered Full Range Speaker w/stand $ $ Dynamic Microphone Floor Stand, Podium, or Table Top (circle one) $88.00 $ Wireless Microphone Handheld Lavalier, or Headset (circle one) $ $ DVD Player (single Disc) $ $ Blu-ray Player $ $ TOTAL ON SITE CONTACT INFORMATION: On-site Contact Name: Cell Phone Number: Delivery Date/Time: Pick-up Date/Time: TOTAL CHARGES EQUIPMENT SUBTOTAL 8% SALES TAX SERVICE CHARGE* (23% OF EQUIPMENT TOTAL) TOTAL AMOUNT DUE SPECIAL INFORMATION: *If your equipment requires installation labor, an additional labor fee will be applied. Call for Pricing. If order is placed within 24 hours of show opening there is an additional 25% fee. Please contact the Show Services Department ( ) to order additional equipment. ADDITIONAL EQUIPMENT: A representative from your company must be on hand to sign for the equipment.

105 Page 102 of 108 PCCA AUDIO VISUAL SERVICE ORDER (EXHIBIT BOOTHS) TERMS & CONDITIONS 1. INSTRUCTION FOR COMPLETING ORDER FORM AND PROCESSING REQUESTS. a. Service Order Forms must be typed or clearly printed. Incomplete order forms, including illegible print and missing information, will not be processed. b. For services and equipment not listed on the Service Order Form, please call the PCC s Show Services Department at (215) or showservices@paconvention.com. c. Completed Service Order Forms should be submitted to PCC Order Processing Department (address listed on page 1). 2. PAYMENT TERMS & CONDITIONS a. Full payment is due with service order or the service order will not be processed. Acceptable forms of payment are: company check (drawn on a U.S. bank) payable to Pennsylvania Convention Center Authority (PCC), and accepted credit cards. Credit Card pre-authorization for on-site charges, labor and equipment is required when placing an order. All Customers with outstanding balances from prior events must submit payment along with service orders, or the outstanding balance will be automatically billed to the approved credit card on file. If prior outstanding balances are not paid, services will not be provided. b. If there are any pre-approved unpaid balances after the close of the event, they are due and payable upon receipt of invoice. Effective 30 days after invoice date, any unpaid balances will bear a FINANCE CHARGE at the lesser of the maximum rate allowed by law, or 1.5% per month, which is an ANNUAL PERCENTAGE RATE OF 18%. If any Finance Charge applied hereunder exceeds the maximum rate allowed by law, the Finance Charge shall automatically be reduced to the maximum rate allowed and any excess Finance Charge received by the PCC shall be applied to reduce the principal unpaid balance or refunded to the payer. c. A $25.00 handling charge will be assessed for returned checks due to insufficient funds. d. Cancellation of services must be received by PCC s Show Services Department 72 hours prior to delivery date, or services and equipment will be billed at 100%. e. It is the Customer s responsibility to advise PCC s Show Services Department of any problems with any order, and to check invoices for accuracy prior to the close of the event. f. Claims regarding services provided by the PCC should be filed by Customer within 90 days of receipt of a final invoice. g. Requests for refunds of overpayments must be submitted to PCC s Finance Department within 90 days of receipt of the final invoice. h. International exhibitors are required to make payment by check in U.S. funds drawn on a U.S. bank or by approved credit card. i. For companies exempt from sales tax, PCC requires an exemption certificate issued by the Commonwealth of Pennsylvania or any state/federal entity. 3. RENTAL TERMS AND CONDITIONS a. A representative of Customer must be present to sign for delivery of equipment. b. All materials and equipment furnished by PCC and/or its sub-contractors shall remain the property of PCC and/or its subcontractors. c. All equipment provided by Customer shall be compliant with the National and Philadelphia Electrical and Building Codes and PCC safety standards. d. All equipment is subject to inspection and approval by PCC prior to connection to service. e. It is understood and agreed that Customer is renting PCC s equipment for a specified period of time and is responsible for its safe return. Customer hereby agrees to use all rental equipment with reasonable care to prevent excessive wear and tear and/or damage to said property. All rental equipment must be returned to PCC in the same condition as it was at the time of delivery to Customer, reasonable wear and tear excluded. Customer will immediately notify PCC of any damage to the rental equipment and Customer hereby agrees to be billed for any damage to or loss of rental equipment while in Customer s care, custody and/or control. In no event shall Customer permit any equipment to be used and/or possessed by parties other than the named Customer without prior consent of PCC in each instance. Services provided may not be shared by multiple exhibits. f. Installation services for advance orders will be completed according to the schedule determined by the General Service Contractor and/or Show Management. On-site orders will be processed in the order that they are received at the PCC Show Services Desk. g. PCC will not be liable for any damages Customer may suffer arising out of acts of God, use or inability to use the audio-visual equipment or related products and/or services, unless such damages are caused by the intentional or willful act of PCC. PCC will not be liable for any special or consequential damages, or for losses, damages or expenses directly or indirectly arising from Customer s use or inability to use the audio-visual equipment or related products and/or services, based upon breach of contract, or any other legal theory, whether or not PCC, its suppliers or subcontractors have been advised of the possibility of such damage or loss. h. The terms and conditions of this agreement shall be governed by and construed in accordance of the laws of the Commonwealth of Pennsylvania. Signed: Company Name: Date: Booth No:

106 Page 103 of 108 RETURN THIS FORM TO: Rockwell Automation PCC ORDER PROCESSING 1101 Arch Street ADVANCED RATE DEADLINE: Philadelphia, PA OCTOBER 15, 2018 Phone: (215) Fax: (215) AUDIO VISUAL MEETING ROOM SERVICE ORDER (Please read terms and conditions that appear on reverse side) Exhibiting Firm: Address: Meeting Room: Event: City: State: Zip: Exhibitor Contact Name: Title: Phone: ( ) FAX: ( ) CREDIT CARD AUTHORIZATION REQUIRED for advance order, on-site charges, labor, and materials [ ] Visa [ ] MasterCard [ ] Amex Account Number: Exp Date: Print Card Holder's name: Signature: AUDIO VISUAL SERVICES (DAILY RATES FOR MEETING ROOMS) PRESENTATION EQUIPMENT 34 or 54 Projection Video Cart w/drape QTY ADVANCE RATE STANDARD RATE $25.00 $ Safelock Stand $20.00 $25.00 Laser Pointer $25.00 $31.00 Flipchart w/markers & Pad $30.00 $38.00 Wireless Computer/Mouse $25.00 $ x16 Black Pipe and Drape (price per section) $ $ Tripod Screen $30.00 $ Tripod Screen $45.00 $ Cradle Screen $85.00 $ Larger Screens and Widescreen Available VIDEO & DATA DISPLAY EQUIPMENT Call for Pricing 32 HD Flat Panel Display $ $ HD Flat Panel Display $ $ HD Flat Panel Display $ $ HD LED Display $ $ DVD Player (single disc) $65.00 $81.00 LCD Support Package (vga cable, cart, & power strip) $45.00 $ Lumens Projector $ $ ON SITE CONTACT INFORMATION: On-site Contact Name: TOTAL AUDIO EQUIPMENT * TOTAL CHARGES EQUIPMENT SUBTOTAL 8% SALES TAX LABOR SERVICES (PLEASE SEE SPECIAL INFORMATION) TOTAL AMOUNT DUE QTY ADVANCE RATE *AUDIO EQUIPMENT INCLUDES USE OF HOUSE SOUND SYSTEM STANDARD RATE Dynamic Microphone (sm58) $35.00 $44.00 Condenser Lavalier Microphone $35.00 $44.00 Floor Microphone Stand or Table Top Microphone Stand n/c n/c Gooseneck for Podium n/c n/c Wireless Handheld Microphone or Wireless Lavalier Microphone $ $ Compact Disc (CD) Player $50.00 $ Channel Audio Mixer $60.00 $ Channel Audio Mixer $ $ Press Mult Box $95.00 $ Direct Box (Computer Audio) $20.00 $25.00 House Audio Patch Fee (per room section/per day) 160 Watt Self-Powered Full Range Speaker w/stand 300 Watt Self-Powered Full Range Speaker w/stand $50.00 $63.00 $65.00 $81.00 $85.00 $ Laptop Computer $ $ TOTAL Cell Phone Number: Delivery Date/Time: SPECIAL INFORMATION: Please contact the Show Services Department ( ) to discuss your estimate for labor services and to order additional equipment. Pick-up Date/Time: