REQUEST FOR INFORMATION (RFI) : UNCOOLED THERMAL IMAGER (TI) TYPE PASSIVE NIGHT SIGHT (PNS) FOR RIFLE AK-47

Size: px
Start display at page:

Download "REQUEST FOR INFORMATION (RFI) : UNCOOLED THERMAL IMAGER (TI) TYPE PASSIVE NIGHT SIGHT (PNS) FOR RIFLE AK-47"

Transcription

1 REQUEST FOR INFORMATION (RFI) : UNCOOLED THERMAL IMAGER (TI) TYPE PASSIVE NIGHT SIGHT (PNS) FOR RIFLE AK Ministry of Defence, Government of India is desirous of procuring uncooled TI type PNS for Rifle AK-47. With the view to identify probable vendors who can undertake the said project, OEMs/ vendors are requested to forward information on the product which they can offer. The parameters/ broad specifications of the item are mentioned in the questionnaire attached as per Appendix A. In addition the vendors are requested to furnish details as per proforma at Appendix B. 2. The Passive Night Sight should be a light weight and ruggedised uncooled TI Technology based device to enable accurate engagement of pin point target by use of Rifle AK-47 at night/ hours of darkness/ indoor dark areas. 3. Apart from the information as per the Appendices, the vendors may also forward technical details/ product brochures/ literature etc pertaining to the item in question. 4. The required information/ details may please be forwarded at the following address by 20 Dec 2014 :- (a) Directorate General of Weapons and Equipment (WE-8/9) General Staff Branch Room No 208 G South Block Integrated HQ of Ministry of Defence (Army) DHQ PO New Delhi (FAX : )

2 2 (b) Directorate General of Rashtriya Rifles Integrated HQ of Ministry of Defence (Army) RPSO Complex, Parade Ground Delhi Cantt (c) Directorate General of Perspective Planning T & WS (GSQR Cell) Room No 902, A Wing Sena Bhawan Integrated HQ of Ministry of Defence (Army) DHQ PO New Delhi (FAX : , Tele ) 4. An early response is requested

3 3 Appendix A (Refers to Para 1 of RFI) QUESTIONNAIRE 1. Following parameters/ specifications of Original Equipment Manufacturers (OEMs) equipment is requested in the responses to our Request for Information :- Ser Question/ Specification No (a) Technology. Specify the technology of uncooled Thermal Imaging based Passive Night Sight (PNS) being offered (b) Reticle Pattern. Will the reticle pattern in the PNS indicate range as well as give out lead and aiming marks? Will the reticle pattern allow the firer to engage targets accurately? If yes, please provide details of the same. (c) The PNS desired is of 1x optical zoom type with 2x and 4x electronic zoom facility. What is the maximum detection and recognition ranges possible of a single standing human target under clear night conditions with 1x optical zoom? (d) What is the field of view of the device? (e) What is the minimum weight of the device (with and without battery and mount), which is able to meet the parameters as in Para 1(c) above? (f) What is the detector resolution? (g) Does the PNS have image polarity with facility for changing the same? (h) What will be the service life of the PNS? (j) What are the various types of controls being provided for optimum utilisation of the PNS? Reply

4 4 Ser Question/ Specification No (k) Power Supply. What type of commercially available removable rechargeable batteries are being provided with the PNS? What is their battery life for continuous use? What is the minimum number of recharge cycles of the rechargeable batteries? (l) How is the low battery indicator placed in PNS? (m) What are the additional accessories being provided alongwith the PNS? (n) Does the PNS meet the JSS parameters? (o) What is the colour of the PNS? (p) Is the sight lightweight, compact, modular in design and ergonomic? (q) Do you provide Picatinny Rail for mounting the sight on AK-47 which do not have Picatinny Rail? (r) Does it facilitate easy mounting/ dismounting on the weapon with the Picatinny Rail mount (Mil-Std-1913) without the use of any tools? (s) Do you provide separate case for carriage (t) and preservation of the equipment? Does the PNS enable its operational usage in all types of climatic conditions? (u) Temperature Parameters. (i) Operational temperature. (ii) Storage temperature. (v) Humidity parameters. Reply

5 5 Appendix B (Refers to Para 1 of RFI) INFORMATION PROFORMA 1. Name of the Vendor/ Company/ Firm (Company profile in brief to be attached) 2. Type (Tick the Relevant Category). (a) Original Equipment Manufacturer (OEM) (b) Government sponsored Export Agency (Details of registration be provided) (c) Authorised Representative of OEM (d) Other (give specific details) Yes/ No Yes/ No Yes/ No (Attach details) (e) Any collaborator/ partner in India (in case of foreign vendors) 3. Contact Details. Postal Address City Province Country PIN/ Zip Code Tele FAX URL/ Website 4. Local Branch/ Liaison Office/ authorised Representatives in India/ New Delhi (if any). Name and address City Province Country PIN/ Zip Code Tele FAX URL/ Website

6 6 5. Financial Details. (a) Annual turn over : USD. (b) Earlier contracts with Indian Ministry of Defence/ Government agencies :- Agency Contract Number Equipment Quantity Cost (c) Details of manufacturing infrastructure available : 6. Certification by Quality Assurance Organisation (If Applicable). Agency Certificate Applicable from (Date and Year) Valid till (Date and Year) 7. Equipment/ Product Profile (to be submitted for each product separately). (a) Name of the product : (Should be given category wise for e.g all products under night vision devices to be mentioned together) (b) Description (attach technical literature) : (c) Whether OEM or Integrator : (d) Status (in service/ design development state) : (e) Production capacity per annum : (f) Countries where equipment is in service :

7 7 (g) Whether export clearance is required from respective government (Foreign Vendors only). (h) In case of equipment and ammunition JB MoU compliance to be specified. (j) Details of any collaboration/ joint venture/ co production/ authorised dealer with Indian Industry (Foreign Vendors only : Name and address : Tele : FAX : 8. (a) Are you making the full equipment or is it being integrated by you? Give details. (b) What are the components, sub system or sub assemblies of the equipment which are not manufactured by you? Please give details. (c) Any other relevant information :