3M Scotchlok Copper Compression Lugs, and Series

Transcription

1 Copper Compression s, and Series Data Sheet June 2011 Description Copper Compression s are one-piece, seamless copper and are designed to cover a wide range of conductor sizes. They are available in onehole, standard-barrel and one-hole and two-hole long-barrel versions: Series are one-hole, standard-barrel length lugs and are designed to cover conductor sizes from 6 AWG through 4/0 AWG. The Series consists of: o one-hole, long-barrel length lugs designed to cover conductor sizes from 2/0 AWG through 600 and, o two-hole, long-barrel length lugs designed to cover conductor sizes from 2/0 AWG through 1000 They are designed to terminate copper conductors. Each lug is electro-tin plated to resist electrolytic corrosion. The lugs are installed using standard industry tooling. Chamfered ends ensure simplicity and ease of conductor insertion. Agency Approvals and Self Certifications Features Applications UL Listed, UL Standard 486A-486B, 3M File No. E23438 CSA Certified, File No Simple installation using readily available tools Manufactured using tin-plated copper Color coded printing for easy lug identification One-Hole, Standard-Barrel: To terminate copper conductors from 6 AWG through 4/0 AWG One-Hole, Long-Barrel: To terminate copper conductors from 2/0 AWG through 600 Two-Hole, Long-Barrel: To terminate copper conductors from 2/0 AWG through 1000 For low and medium voltage up to 35kV For indoor and outdoor use 1 of 7 3

2 Copper Compression s, and Series One-Hole, Standard-Barrel Dimensions and Selection Guide [Dimensions in Inches and (Millimeters)] NOTE: All listed lugs are UL Listed and CSA Certified Stud Color Code I.D., O.D., L,.10 B, Barrel.060 P, Pad.060 W, Pad Width,.060 C, Center of Hole-to- End of Pad, AWG #10 (5).196 (5,0).290 (7,37) 1.78 (45,2).86 (21,8).435 (11,0) AWG 1/4 (6).196 (5,0).290 (7,37) 1.78 (45,2).86 (21,8).435 (11,0) AWG.196 (5,0).290 (7,37) 1.78 (45,2).86 (21,8).50 (12,7) AWG #10 (5) Gray.247 (6,3).340 (8,64) (49,3).485 (12,3) AWG 1/4 (6) Gray.247 (6,3).340 (8,64) (49,3).485 (12,3) AWG Gray.247 (6,3).340 (8,64) (49,3).59 (15,1) AWG 1/4 (6).307 (7,8).416 (10,57).63 (15,9) AWG.307 (7,8).416 (10,57).63 (15,9) AWG.307 (7,8).416 (10,57).63 (15,9) AWG.358 (9,1).462 (11,7).69 (17,5) AWG.358 (9,1).462 (11,7).69 (17,5) /0 AWG Pink.394 (10,0).512 (13,0) 2.16 (54,9) /0 AWG Pink.394 (10,0).512 (13,0) 2.16 (54,9) /0 AWG Black.439 (11,2).560 (14,2) 2.37 (60,2).87 (22,2) /0 AWG Orange.490 (12,4).617 (15,7) 2.63 (66,8).94 (23,8).91 (23,0) /0 AWG Purple.548 (13,9).687 (17,4) 2.60 (65,9).97 (24,6) 1.00 (25,4) 2 of 7

3 Copper Compression s, and Series One Hole, Long-Barrel Dimensions and Selection Guide [Dimensions in Inches and (Millimeters)] AWG or Stud Color Code I.D., O.D., L,.10 B, Barrel.060 P, Pad.060 W, Pad Width,.060 C, Center of Holeto-End of Pad,.030 Agency Approvals /0 AWG Black.439 (11,2).560 (14,2) 2.84 (72,2) 1.44 (36,5) 0 (20,6).375 (9,53) /0 AWG Orang e.490 (12,4).617 (15,7) 3.13 (79,5) 1.44 (36,5).910 (23,1) /0 AWG Purple.548 (13,9).687 (17,4) 3.32 (84,4) 1.56 (39,7) 1.00 (25,4) Yellow.595 (15,1) (85,9) 1.50 (38,0) White.650 (16,5) 3 (20.,6) 3.78 (96,0) 1.22 (31,3) Red.700 (17,8).875 (22,2) 3.84 (97,5) 1.27 (32,3) (19,3).950 (24,1) 4.16 (105,7) 2.00 (50,8) 1.34 (34,2) 1.41 (35,8).66 (16,8) UL (21,3) (26,9) 4.50 (114,3) 2.19 (55,6) 1.34 (34,2) 1.53 (38,9).66 (16,8) /8 (16).836 (21,3) (26,9) 4.50 (114,3) 2.19 (55,6) 1.34 (34,2) 1.53 (38,9).66 (16,8) (23,4) (30,2) 5.12 (130,0) 2.60 (66,0) 1 (44,5) 1.69 (42,9).88 (22,4) UL 3 of 7

4 Copper Compression s, and Series Two Hole, Long-Barrel Dimensions and Selection Guide [Dimensions in Inches and (Millimeters)] AWG or Stud Color Code I.D., O.D., L,.100 B, Barrel.100 P, Pad Length,.060 W, Pad Width,.060 C, Center of Hole-to-End of Pad,.030 C1, Holeto-Hole, Center to- Center,.015 Agency Approvals /0 AWG Purple.548 (13,9).687 (17,4) 5.16 (131,1) 1.56 (39,6) 1.00 (25,4).63 (16,0) 1 (44,5) Yellow.595 (15,1) (134,9) 1.56 (39,6) 1.13 (28,7).63 (16,0) 1 (44,5) White.650 (16,5) 3 5 (146,1) 1.22 (31,0).63 (16,0) 1 (44,5) Red.700 (17,8).875 (22,2) 5 (146,1) 1.31 (33,3).63 (16,0) 1 (44,5) (19,4).950 (24,1) 6.00 (152,4) 2.12 (53,8) 1.41 (35,8).63 (16,0) 1 (44,5) UL (21,2) (26,9) 6.16 (156,5) 2.19 (55,6) 1.53 (38,9).63 (16,0) 1 (44,5) (23,4) (30,2) 6.72 (170,6) 2.62 (66,5) 1.69 (42,9).63 (16,0) 1 (44,5) UL Black (26,2) (33,0) 7.00 (177,8) 2 (71,4) 1.72 (43,7).63 (16,0) 1 (44,5) White (29,8) (38,1) 7.28 (184,9) 2.94 (74,6) 1.72 (43,7).63 (16,0) 1 (44,5) Typical Properties Not for specifications. Values are typical, not to be considered minimum or maximum. Properties measured at room temperature 73 F (23 C) unless otherwise stated. Copper Compression s, and Series, when crimped with approved die sets, can be used on cables with an operating temperature of 194 o F (90 o C) and an emergency overload rating of 266 o F (130 o C). The lugs pass the requirements of UL486A (Underwriters Laboratories standard for safety) and are CSA Certified. The current rating of these lugs meets or exceeds the current rating of the conductor size for which it is intended. 4 of 7

5 Copper Compression s, and Series Tool/Installation Information s shall be crimped with one of the approved die sets according to the engineering information supplied with the lugs. (Also see Crimping Tool-Die Sets tables below) Crimping Tool Recommendations One-Hole, Standard-Barrel Crimping Tool Die Sets (# of Crimps) Burndy Corporation MD6 MY29 Y34A Y35, Y39, Y45*, Y46* Thomas & Betts Corporation TBM5 TBM 8 TBM15 Square D Co. Anderson Div. VC6-3, VC6-FT** AWG AWG AWG AWG W AWG W AWG W AWG W AWG W AWG W AWG AWG AWG 6 AWG 6 AWG 4 AWG 4 AWG 4 AWG 2 AWG 2 AWG 2 AWG 1 AWG 1 AWG A4CR A4CR A4CR A2CR A2CR A2CR A1CR A1CR U5CRT U5CRT U5CRT U4CRT U4CRT U4CRT U2CRT U2CRT U2CRT U1CRT U1CRT Universal Universal Universal Gray Gray Universal Gray Gray Universal Gray Gray Universal 33 Universal 33 Universal 33 Universal 37 Universal 37 Universal /0 AWG W163 1/0 A25R U25RT Pink Pink 42H Universal /0 AWG W163 1/0 A25R U25RT Pink Pink 42H Universal /0 AWG W241 2/0 A26R U26RT Black Black 45 Universal /0 AWG W243 3/0 A27R U27RT Orange Orange 50 Universal /0 AWG BG (3) 4/0 A28R U28RT Purple Purple 54H Universal * Y45 and Y46 accept all Y35 dies ( U series). For Y45 use PT6515 adapter. For Y46 use PUADP adapter. ** Anderson VC6-3 and VC6-FT require no die set. 5 of 7

6 Copper Compression s, and Series One-Hole, Long-Barrel Crimping Tool Die Sets (# of Crimps) Burndy Corporation MD6 MY29 Y34A Y35, Y39, Y45*, Y46* Thomas & Betts Corporation TBM5 TBM 8 TBM15 Square D Co. Anderson Div. VC6-3, VC6-FT** /0 AWG W241 (3) 2/0 A26R U26RT (3) Black (3) Black (3) 45 Universal /0 AWG W243 (3) 3/0 A27R U27RT (3) Orange (3) Orange (3) 50 Universal (3) /0 AWG BG (4) 4/0 A28R U28RT (3) Purple (3) Purple (3) 54H (3) Universal (3) W166 (4) 250 A29R U29RT (3) Yellow Yellow 62 Universal A30R U30RT (3) White (3) 66 (3) Universal (3) A31R U31RT (3) Red (4) 71H (4) A32R U32RT (3) (4) 76H (4) A34R U34RT (3) (4) 87H (4) A34R U34RT (3) (4) 87H (4) U36RT (3) (4) 94H (4) * Y45 and Y46 accept all Y35 dies ( U series). For Y45 use PT6515 adapter. For Y46 use PUADP adapter. ** Anderson VC6-3 and VC6-FT require no die set. Two-Hole, Long-Barrel Crimping Tool Die Sets (# of Crimps) Burndy Corporation MD6 MY29 Y34A Y35, Y39, Y45*, Y46* Thomas & Betts Corporation TBM5 TBM 8 TBM15 Square D Co. Anderson Div. VC6-3, VC6-FT** /0 AWG BG (4) 4/0 A28R U28RT (3) Purple (3) Purple (3) 54H (3) Universal (3) W166 (4) 250 A29R U29RT (3) Yellow Yellow 62 Universal A30R U30RT (3) White (3) 66 (3) Universal (3) A31R U31RT (3) Red (4) 71H (4) A32R U32RT (3) (4) 76H (4) A34R U34RT (3) (4) 87H (4) U36RT (3) (4) 94H (4) Y39, Y45, Y46: U39RT (5) H (4) Y45: S44RT (6) Y46: P44RT (6) H (4) * Y45 and Y46 accept all Y35 dies ( U series). For Y45 use PT6515 adapter. For Y46 use PUADP adapter. ** Anderson VC6-3 and VC6-FT require no die set 6 of 7

7 Copper Compression s, and Series Shelf Life & Storage The Copper Compression s, and Series have a 20-year shelf life from date of manufacture when stored in a humidity controlled storage (10 C/50 F to 27 C/80 F and <75% relative humidity). Components of the lugs are not impaired by freezing or overheating due to ambient temperatures found in typical storage or shipping. Normal stock rotation procedures are recommended. Availability Please contact your local distributor; available from 3M.com/electrical [Where to Buy] or call Important Notice Warranty; Limited Remedy; Limited Liability All statements, technical information, and recommendations related to 3M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product, which are not contained in 3M s current publications, or any contrary statements contained on your purchase order, shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M and Scotchlok are trademarks of 3M Company. 3 Electrical Markets Division 6801 River Place Blvd. Austin, TX FAX: Please recycle 3M 2011 All rights reserved A 7 of 7