REQUEST FOR QUOTES Page 1 of 5

Transcription

1 REQUEST FOR QUOTES Page 1 of 5 COUNTY OF ORANGEBURG LIMITED SOLICITATION FORM 1437 Amelia Street Orangeburg, S, C Jannella Shuler, Procurement Director jshuler@orangeburgcounty.org (803) or (803) fax Solicitation Number: FY Solicitation Title :) Heavy Duty Wheel Balancer Agency Contact: Jannella S. Shuler, Procurement Director (803) or Henry Summers, Asst. Public Services Director. (803) Limited Solicitation is an informal procurement method for purchases over $10,000 and up to $50,000. This process is authorized by section Article B of Orangeburg County Procurement Code ( Code ) Company Name: Address: Phone Number: Fax Number: Federal Tax ID Number: Responses to this solicitation will be accepted by Orangeburg County Procurement Office 3 rd floor 1437 Amelia Street, Orangeburg, S. C by or before 11:00 A.M. May 23, Fax bids will be accepted to (803) (no late bids will be accepted). The following documents are attached to this solicitation and will be applicable to the resultant contract: (none). Please check website Purchasing/Bids- Solicitations for addendums before you submit your quote. Request Quotes FY SPECIFICATIONS FOR Heavy-Duty Wheel Balancer (Coates or Equal), Lift (575) and Adapter Kit Brand Names or Equal: The name of any manufacturer, trade name, or manufacturer s or vendor s catalog or model number set forth in the below specification is for the purpose of describing the minimum standard of quality, type or performance. Such references are not intended to be restrictive. Bids will be considered for any brand that meets or exceeds the quality or performance specified. Equipment must be acceptable so as to meet established design requirements and pre-approved by end user prior to final award. Any request for substitutions that meet or exceed this design and performance specification must be submitted on Certification of No Exceptions. No consideration will be given to any substitutes that are not pre-approved in writing prior to final award. Approval or denial of substitutions will be at the end users discretion as to equality of the product and ability to meet quality and/or design requirements. Specifications are subject to normal manufacturing tolerances and may be changed without prior notice.

2 Coats Heavy-Duty Wheel Balancers/Lift and Adapter Kit (or Equal) Specifications (Page 1 of 2) Heavy-Duty Balancer D Drive System Direct Tire Diameter 52 Rim Width Maximum Tire Weight 500 lbs. (UL) Self Calibrating On Screen Calibration Directions Auto Data Entry 3-Parameter Stop On Top Stop & Lock Auto Indexing Operator A & B Match Mount Motor Size 1.5 hp. Direct Cycle Time R (200 lb.) 18 sec. Cones 2 Auto, 2 Light Truck Ounce/Gram Selectable Adapter Storage Slide Pegs Direct Weight Placement Monitor/Display LED w/text Instruction Box Balancing Modes 11 Shaft Diameter 2: (51mm) Resolution Displayed.01 oz. Accuracy.01 oz. Round Off ¼ - ½ - 2 oz. Footprint 72 w x 62 d Shipping Weight 1,100 lbs v/3ph@60hz

3 Specifications ( Page 2 of 2) Heavy Duty Adapter Kit Spec s 6450/ 3 D 4 Cone Set Standard Extra Large D Cone, Car/Lt. Truck Improved Light Truck Cone Kit Hub Centered Budd Cone Kit O Deep Offset Plate Set (3) O Std. Balancer Chuck w/plate Extension Jaws for Std. Chuck Front Plate, Optional for Ext. Jaws HD Balancer Chuck w/plate O Dayton Standard Center Adapter O Extension Kit for Standard Adapter O Stud Piloted Budd Adapter O

4 Return this page to Procurement Vendor is qualified for and desires to exercise the following preference(s) as vendor has marked, below: Preference 1. Vendor is a resident of the State of South Carolina: No Preference 2. Vendor is a resident of Orangeburg County, SC: No Preference 3. Vendor is an MBE: No Anticipated Delivery Date after award notification Vendor has Certificate of Insurance Liability to include Workmen s Compensation Insurance only required if vendor is to work on Orangeburg County Property No. Manufacture warranty required on equipment/parts for minimum 5 years unless manufacture warranty exceeds. Please state warranty on all equipment, parts, etc. Price: $ Inclusive of all costs to include but not limited to equipment, labor, installation and removal of existing equipment (except sale taxes on labor) By vendor s signature below, vendor agrees that Article 1-7 of the Code are incorporated by reference as terms of the vendor s written quote. The undersigned vendor agrees to be bound to the Code regarding all matters arising form the Request for Quotes. Vendor Authorized Signature: (required, if not signed your quote may cause for disqualification ) Please check here if you acknowledge addendum information if applicable. Additional vendor information or exceptions attached: No

5 Return this page to Procurement Attachment or Exception Sheet to the above Specifications.