SN54S140, SN74S140 DUAL 4-INPUT POSITIVE-NAND 50-OHM LINE DRIVERS
|
|
|
- Clyde Lane
- 5 years ago
- Views:
Transcription
1 SN54S140, SN74S140 DUAL 4-INPUT POSITIVE-NAND 50-OHM LINE DRIVERS SDLS210 DECEMBER 1983 REVISED MARCH 1988 PRODUCTION Products conform DATA to specifications information is per current the terms as of of Texas publication Instruments date. standard testing of warranty. all parameters. Production processing does not necessarily include Copyright 1988, Texas Instruments Incorporated POST OFFICE BOX DALLAS, TEXAS
2 SN54S140, SN74S140 DUAL 4-INPUT POSITIVE-NAND 50-OHM LINE DRIVERS SDLS210 DECEMBER 1983 REVISED MARCH POST OFFICE BOX DALLAS, TEXAS 75265
3 SN54S140, SN74S140 DUAL 4-INPUT POSITIVE-NAND 50-OHM LINE DRIVERS SDLS210 DECEMBER 1983 REVISED MARCH 1988 POST OFFICE BOX DALLAS, TEXAS
4 PACKAGE OPTION ADDENDUM 26-Sep-2005 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3) JM38510/08101BCA ACTIVE CDIP J 14 1 TBD Call TI Level-NC-NC-NC JM38510/08101BDA ACTIVE CFP W 14 1 TBD Call TI Level-NC-NC-NC JM38510/08101BDA ACTIVE CFP W 14 1 TBD Call TI Level-NC-NC-NC SN54S140J ACTIVE CDIP J 14 1 TBD Call TI Level-NC-NC-NC SN54S140J ACTIVE CDIP J 14 1 TBD Call TI Level-NC-NC-NC SN74S140D ACTIVE SOIC D Green (RoHS & SN74S140D ACTIVE SOIC D Green (RoHS & SN74S140DE4 ACTIVE SOIC D Green (RoHS & SN74S140DE4 ACTIVE SOIC D Green (RoHS & SN74S140DR ACTIVE SOIC D Green (RoHS & SN74S140DR ACTIVE SOIC D Green (RoHS & SN74S140DRE4 ACTIVE SOIC D Green (RoHS & SN74S140DRE4 ACTIVE SOIC D Green (RoHS & SN74S140N ACTIVE PDIP N Pb-Free (RoHS) SN74S140N ACTIVE PDIP N Pb-Free (RoHS) SN74S140N3 OBSOLETE PDIP N 14 TBD Call TI Call TI SN74S140N3 OBSOLETE PDIP N 14 TBD Call TI Call TI SN74S140NE4 ACTIVE PDIP N Pb-Free (RoHS) SN74S140NE4 ACTIVE PDIP N Pb-Free (RoHS) SN74S140NSR ACTIVE SO NS Green (RoHS & SN74S140NSR ACTIVE SO NS Green (RoHS & SN74S140NSRE4 ACTIVE SO NS Green (RoHS & SN74S140NSRE4 ACTIVE SO NS Green (RoHS & Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC SNJ54S140FK ACTIVE LCCC FK 20 1 TBD Call TI Level-NC-NC-NC SNJ54S140FK ACTIVE LCCC FK 20 1 TBD Call TI Level-NC-NC-NC SNJ54S140J ACTIVE CDIP J 14 1 TBD Call TI Level-NC-NC-NC SNJ54S140J ACTIVE CDIP J 14 1 TBD Call TI Level-NC-NC-NC SNJ54S140W ACTIVE CFP W 14 1 TBD Call TI Level-NC-NC-NC SNJ54S140W ACTIVE CFP W 14 1 TBD Call TI Level-NC-NC-NC (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. Addendum-Page 1
5 PACKAGE OPTION ADDENDUM 26-Sep-2005 LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & - please check for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & : TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2
6
7
8 MECHANICAL DATA MLCC006B OCTOBER 1996 FK (S-CQCC-N**) 28 TERMINAL SHOWN LEADLESS CERAMIC CHIP CARRIER NO. OF TERMINALS ** MIN A MAX MIN B MAX (8,69) (9,09) (7,80) (9,09) A SQ B SQ (11,23) (16,26) (18,78) (23,83) (28,99) (11,63) (16,76) (19,32) (24,43) (29,59) (10,31) (12,58) (12,58) (21,6) (26,6) (11,63) (14,22) (14,22) (21,8) (27,0) (0,51) (0,25) (2,03) (1,63) (0,51) (0,25) (1,40) (1,14) (1,14) (0,89) (0,71) (0,54) (1,27) (1,14) (0,89) / D 10/96 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. This package can be hermetically sealed with a metal lid. D. The terminals are gold plated. E. Falls within JEDEC MS-004 POST OFFICE BOX DALLAS, TEXAS 75265
9
10
11
12 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio Data Converters dataconverter.ti.com Automotive DSP dsp.ti.com Broadband Interface interface.ti.com Digital Control Logic logic.ti.com Military Power Mgmt power.ti.com Optical Networking Microcontrollers microcontroller.ti.com Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box Dallas, Texas Copyright 2005, Texas Instruments Incorporated
SN5473, SN54LS73A, SN7473, SN74LS73A DUAL J-K FLIP-FLOPS WITH CLEAR
SN5473, SN54LS73A, SN7473, SN74LS73A DUAL J-K FLIP-FLOPS WITH CLEAR SDLS118 DECEMBER 1983 REVISED MARCH 1988 PRODUCTION DATA information is current as of publication date. Products conform to specifications
SN5473, SN54LS73A, SN7473, SN74LS73A DUAL J-K FLIP-FLOPS WITH CLEAR
SN5473, SN54LS73A, SN7473, SN74LS73A DUAL J-K FLIP-FLOPS WITH CLEAR SDLS118 DECEMBER 1983 REVISED MARCH 1988 PRODUCTION DATA information is current as of publication date. Products conform to specifications
SN5473, SN54LS73A, SN7473, SN74LS73A DUAL J-K FLIP-FLOPS WITH CLEAR
SN5473, SN54LS73A, SN7473, SN74LS73A DUAL J-K FLIP-FLOPS WITH CLEAR SDLS118 DECEMBER 1983 REVISED MARCH 1988 PRODUCTION DATA information is current as of publication date. Products conform to specifications
SN5495A, SN54LS95B SN7495A, SN74LS95B 4-BIT PARALLEL-ACCESS SHIFT REGISTERS
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include
SDLS047 DECEMBER 1983 REVISED MARCH 1988
SDLS047 DECEMBER 1983 REVISED MARCH 1988 Copyright 1988, Texas Instruments Incorporated POST OFFICE BOX 655303 DALLAS, TEXAS 75265 1 SDLS047 DECEMBER 1983 REVISED MARCH 1988 2 POST OFFICE BOX 655303 DALLAS,
SDLS940A MARCH 1974 REVISED MARCH Copyright 1988, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include
SDLS940A MARCH 1974 REVISED MARCH Copyright 1988, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include
Data sheet acquired from Harris Semiconductor SCHS018C Revised September 2003
Data sheet acquired from Harris Semiconductor SCHS018C Revised September 2003 The CD4007UB types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix), 14-lead dual-in-line plastic
SN54LS181, SN54S181 SN74LS181, SN74S181 ARITHMETIC LOGIC UNITS/FUNCTION GENERATORS
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Data sheet acquired from Harris Semiconductor SCHS086D Revised April 2004
Data sheet acquired from Harris Semiconductor SCHS015C Revised August 2003
Data sheet acquired from Harris Semiconductor SCHS015C Revised August 2003 The CD4001B, CD4002B, and CD4025B types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix), 14-lead dual-in-line
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Data sheet acquired from Harris Semiconductor SCHS057C Revised September
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Data sheet acquired from Harris Semiconductor SCHS021D Revised September
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Data sheet acquired from Harris Semiconductor SCHS072B Revised July 2003
Data sheet acquired from Harris Semiconductor SCHS058C Revised October 2003
Data sheet acquired from Harris Semiconductor SCHS058C Revised October 2003 The CD4076B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages
SN54LS292, SN54LS294, SN74LS292, SN74LS294 PROGRAMMABLE FREQUENCY DIVIDERS/DIGITAL TIMERS
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include
CD4071B Quad 2-Input OR Gate CD4072B Dual 4-Input OR Gate CD4075B Triple 3-Input OR Gate
Data sheet acquired from Harris Semiconductor SCHS056D Revised August 2003 CD4071B Quad 2-Input OR Gate CD4072B Dual 4-Input OR Gate CD4075B Triple 3-Input OR Gate CD4071B, CD4072B, and CD4075B OR gates
SDLS940A MARCH 1974 REVISED MARCH Copyright 1988, Texas Instruments Incorporated
SN5490A, SN5492A, SN5493A, SN54LS90, SN54LS92, SN54LS93 SN7490A, SN7492A, SN7493A, SN74LS90, SN74LS92, SN74LS93 DECADE, DIVIDE-BY-TWELVE AND BINARY COUNTERS SDLS940A MARCH 1974 REVISED MARCH 1988 PRODUCTION
For data sheet and general inquiries on the UCD30xx part family, please contact
For data sheet and general inquiries on the UCD30xx part family, please contact ucd30xxdigitalpowersupport@list.ti.com PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All
SN5446A, 47A, 48, SN54LS47, LS48, LS49 SN7446A, 47A, 48, SN74LS47, LS48, LS49 BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include
SDLS940A MARCH 1974 REVISED MARCH Copyright 1988, Texas Instruments Incorporated
SN5490A, SN5492A, SN5493A, SN54LS90, SN54LS92, SN54LS93 SN7490A, SN7492A, SN7493A, SN74LS90, SN74LS92, SN74LS93 DECADE, DIVIDE-BY-TWELVE AND BINARY COUNTERS SDLS940A MARCH 1974 REVISED MARCH 1988 PRODUCTION
SN54LS670, SN74LS670 4-BY-4 REGISTER FILES WITH 3-STATE OUTPUTS
SN54LS670, SN74LS670 4-BY-4 REGISTER FILES WITH 3-STATE OUTPUTS SDLS193 MARCH 1974 REVISED MARCH 1988 PRODUCTION DATA information is current as of publication date. Products conform to specifications per
SN5410, SN54LS10, SN54S10, SN7410, SN74LS10, SN74S10 TRIPLE 3-INPUT POSITIVE-NAND GATES
SN540, SN54LS0, SN54S0, SN740, SN74LS0, SN74S0 TRIPLE 3-INPUT POSITIVE-NAND GATES SDLS035A DECEMBER 983 REVISED APRIL 2003 PRODUCTION DATA information is current as of publication date. Products conform
SN5446A, 47A, 48, SN54LS47, LS48, LS49 SN7446A, 47A, 48, SN74LS47, LS48, LS49 BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS
SN5446A, 47A, 48, SN54LS47, LS48, LS49 SN7446A, 47A, 48, SN74LS47, LS48, LS49 BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS SDLS111 MARCH 1974 REVISED MARCH 1988 PRODUCTION DATA information is current as of publication
SN5446A, 47A, 48, SN54LS47, LS48, LS49 SN7446A, 47A, 48, SN74LS47, LS48, LS49 BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS
SN5446A, 47A, 48, SN54LS47, LS48, LS49 SN7446A, 47A, 48, SN74LS47, LS48, LS49 BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS SDLS111 MARCH 1974 REVISED MARCH 1988 PRODUCTION DATA information is current as of publication
SDLS940A MARCH 1974 REVISED MARCH Copyright 1988, Texas Instruments Incorporated
SN5490A, SN5492A, SN5493A, SN54LS90, SN54LS92, SN54LS93 SN7490A, SN7492A, SN7493A, SN74LS90, SN74LS92, SN74LS93 DECADE, DIVIDE-BY-TWELVE AND BINARY COUNTERS SDLS940A MARCH 1974 REVISED MARCH 1988 PRODUCTION
SDLS940A MARCH 1974 REVISED MARCH Copyright 1988, Texas Instruments Incorporated
SN5490A, SN5492A, SN5493A, SN54LS90, SN54LS92, SN54LS93 SN7490A, SN7492A, SN7493A, SN74LS90, SN74LS92, SN74LS93 DECADE, DIVIDE-BY-TWELVE AND BINARY COUNTERS SDLS940A MARCH 1974 REVISED MARCH 1988 PRODUCTION
SN5446A, 47A, 48, SN54LS47, LS48, LS49 SN7446A, 47A, 48, SN74LS47, LS48, LS49 BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS
SN5446A, 47A, 48, SN54LS47, LS48, LS49 SN7446A, 47A, 48, SN74LS47, LS48, LS49 BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS SDLS111 MARCH 1974 REVISED MARCH 1988 PRODUCTION DATA information is current as of publication
SN54155, SN54156, SN54LS155A, SN54LS156, SN74155, SN74156, SN74LS155A, SN74LS156 DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXERS
SN54155, SN54156, SN54LS155A, SN54LS156, SN74155, SN74156, SN74LS155A, SN74LS156 DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXERS SDLS057 MARCH 1974 REVISED MARCH 1988 PRODUCTION DATA information is current
SDLS068A DECEMBER 1972 REVISED OCTOBER Copyright 2001, Texas Instruments Incorporated
SN54174, SN54175, SN54LS174, SN54LS175, SN54S174, SN54S175, SN74174, SN74175, SN74LS174, SN74LS175, SN74S174, SN74S175 PRODUCTION DATA information is current as of publication date. Products conform to
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Data sheet acquired from Harris Semiconductor SCHS044A Revised March 2002
PACKAGE OPTION ADDENDUM www.ti.com 17-Mar-2017 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan UC2906DW NRND SOIC DW 16 40 Green (RoHS UC2906DWG4
SN54390, SN54LS390, SN54393, SN54LS393 SN74390, SN74LS390, SN74393, SN74LS393 DUAL 4-BIT DECADE AND BINARY COUNTERS
SN54390, SN54LS390, SN54393, SN54LS393 SN74390, SN74LS390, SN74393, SN74LS393 DUAL 4-BIT DECADE AND BINARY COUNTERS SDLS107 OCTOBER 1976 REVISED MARCH 1988 PRODUCTION DATA information is current as of
Data sheet acquired from Harris Semiconductor SCHS091B Revised July 2003
Data sheet acquired from Harris Semiconductor SCHS091B Revised July 2003 The CD4585B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages
Data sheet acquired from Harris Semiconductor SCHS098D Revised October 2003
Data sheet acquired from Harris Semiconductor SCHS098D Revised October 2003 The CD40107B is a dual 2-input NAND buffer/driver containing two independent 2-input NAND buffers with open-drain single n-channel
Section 7. Additional Information on Products, Tools and Support
Section 7 Additional Information on Products, Tools and Support From 7-1 For more information on Data Converters please look at the Texas Instruments data converter home page: This page provides access
Data sheet acquired from Harris Semiconductor SCHS287B Revised January 2004
Data sheet acquired from Harris Semiconductor SCHS287B Revised January 2004 The RCA CD54/74AC240, CD54/74AC241, and CD54/74AC244 and the CD54/74ACT240, CD54/74ACT241, and CD54/74ACT244 3-state octal buffer/line
QualiPHY Test Report. Overall result: Pass. Page 1 of 17 SLLQ001. Run1:
SLLQ001 Page 1 of 17 QualiPHY Test Report Overall result: DUT: SN65LVPE502 Comment: Time of session start: 07/20/2010 16:01:50 Operator: Temperature 25 C Standard in use: Run1: Time of run 2010/07/20 16:02:16
The CD54AC540, -541, and CD54ACT540, -541, available in chip form (H suffix), are operable over the 55 to +125 C temperature range.
Data sheet acquired from Harris Semiconductor SCHS285A Revised November 1999 The CD54/74AC540, -541, and CD54/74ACT540, -541 octal buffer/line drivers use the RCA ADVANCED CMOS technology. The CD54/74AC/ACT540
Tutorial: PREESM - Dataflow Programming of Multicore DSPs
Tutorial: PREESM - Dataflow Programming of Multicore DSPs Karol Desnos, Clément Guy, Maxime Pelcat EDERC 2014 Conference, Milan, September 11 th 1 PREESM http://preesm.sourceforge.net/website Eclipse-based
DUAL SCHOTTKY DIODE BRIDGE
UC1610 UC3610 DUAL SCHOTTKY DIODE BRIDGE SLUS339B JUNE 1993 REVISED DECEMBER 2004 FEATURES Monolithic Eight-Diode Array Exceptional Efficiency Low Forward Voltage Fast Recovery Time High Peak Current Small
RESIDENTIAL INDICATOR. User Guide. User Guide Page 1
RESIDENTIAL INDICATOR User Guide User Guide Page 1 Important Notice reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at
Figure 1 Input power cable (left) and output power cable (right)
TIDA-00282 Cable Assemblies These cable assemblies are intended for use with the C2000-based Automotive Digitally-controlled Boost Power Supply board described in TI Designs TIDA-00282. Figure 1 Input
Application Report. Donald C. Abbott, Stu Grenney, Larry Nye, Douglas W. Romm... SLL Logic ABSTRACT
Application Report Whisker Evaluation of Pb-Free Component Leads Donald C. Abbott, Stu Grenney, Larry Nye, Douglas W. Romm... SLL Logic ABSTRACT Integrated circuits (ICs) with both tin-lead (SnPb) and
Telecom Power Systems: Why be Discrete? By Brian King and Robert Kollman Texas Instruments
Telecom Power Systems: Why be Discrete? By Brian King and Robert Kollman Texas Instruments Power supply modules have been very popular in telecom systems for their ease of use, design robustness, and multiple
WX Series Low Frequency Crystal February 2016
The Pletronics WX Series is a cylindrical watch crystal. 32.768 KHz only XY Cut Crystal Available in 2 sizes - WX:3x8mm, WX26:2x6mm Pletronics Inc. certifies this device is in accordance with the RoHS
Low Maintenance AC Powered Security Gate
AN-9002 IPC Application Note: Low Maintenance AC Powered Security Gate Mechanical Gate components: A typical Security Gate system consists of the gate, a rail or guide system, one or two motors, a cable
TMS320C6x Manufacturing with the BGA Package
TMS320C6x Manufacturing with the BGA Package APPLICATION REPORT: SPRA429 David Bell Digital Signal Processing Solutions March 1998 IMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes
TMS320C6000 BGA Manufacturing Considerations
TMS320C6000 BGA Manufacturing Considerations David Bell C6000 Applications Team Abstract When designing with a high-density BGA package, it is important to be aware of different techniques that aid in
SN65HVD257D CAN EVM. CAN Transceivers with Fast Loop Times for Highly Loaded Networks and Features For Functional Safety Networks REVISION: A
EVM TEST PROCEDURE SN65HVD257D CAN EVM CAN Transceivers with Fast Loop Times for Highly Loaded Networks and Features For Functional Safety Networks REVISION: A By: Scott Monroe and Jason Blackman REVISION
1. Installing the Extension in Magento 2
Table of Contents 1. Installing the extension in Magento 2. 2. Managing the Product Units and Quantities extension. 3. Setting Units and Quantities for a single product. 4. Product Units and Quantities
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/95/124859995.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. 5,0 Inductance L 100 khz/ 100 mv 4.7 µh ±20% Rated Inductance L R 100 khz/ 100 mv/ 13.0
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/94/119206143.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical & Optical Properties: Properties Test conditions Value Unit Tol. 2,05 6,05 2,05 Inductance L 100 khz/ 10 ma 1.8 µh ±20% Rated Current I R ΔT =
Integrated Assembly and Strip Test of Chip Scale Packages
Integrated Assembly and Strip Test of Chip Scale Packages Literature Number: SNOA846 Technology Edge Republished with permission by Chip Scale Review Integrated Assembly and Strip Test of Chip Scale Packages
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/92/108389450.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] 8,0 ±0,3 5,0 ±0,2 12,0 ±0,5 10,0 max. Recommended Land Pattern: [mm] 5,4 7,0 2,9 12,8 no vias and sensitive traces underneath the component Scale - 2:1 Schematic: Electrical Properties:
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/92/109322159.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] 8,0 ±0,3 5,0 ±0,2 12,0 ±0,5 10,0 max. Recommended Land Pattern: [mm] 5,4 7,0 2,9 12,8 no vias and sensitive traces underneath the component Scale - 2:1 Schematic: Electrical Properties:
1,35 1,0 0,6. Scale - 6:1
Dimensions: [mm] Recommended Land Pattern: [mm] 3 4 0,5 0,6 1,5 O 0,65 +0,1-0,0 0,8 1 2 0,4 1 4,7 2 3 4 2,2 1,6 4,05 1 3,5 Scale - 6:1 1,0 1,35 Schematic: 3,9 ±0,15 h 0,1 ref. 0,5 0,6 1 2 2,9 3,55 3 4
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/93/112534808.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] 8,0 ±0,3 5,0 ±0,2 12,0 ±0,5 Recommended Land Pattern: [mm] 5,4 7,0 2,9 12,8 no vias and sensitive traces underneath the component Scale - 2:1 Schematic: Electrical Properties: Properties
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/93/113495291.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] 8,0 ±0,3 5,0 ±0,2 12,0 ±0,5 10,0 max. Recommended Land Pattern: [mm] 5,4 7,0 2,9 12,8 no vias and sensitive traces underneath the component Scale - 2:1 Schematic: Electrical Properties:
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/93/113836283.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] 8,0 ±0,3 5,0 ±0,2 12,0 ±0,5 10,0 max. Recommended Land Pattern: [mm] 5,4 7,0 2,9 12,8 no vias and sensitive traces underneath the component Scale - 2:1 Schematic: Electrical Properties:
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/96/126600434.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] 2,5 ±0,2 1,25 ±0,2 5 ±0,2 4 ±0,3 Recommended Land Pattern: [mm] 4,5 2,3 1,55 Scale - 5:1 Electrical Properties: Properties Test conditions Value Unit Tol. Inductance L 100 khz/ 1 V 15
Phase Shifter. No. SP-LFZ P1/6. 1. Electrical Characteristics (at -40 ~ +85 C) Nominal Characteristics Impedance
P1/6 Phase Shifter 1. Electrical Characteristics (at -40 ~ +85 C) LFP152G5E090F123TEMP 0.48 db max. at +25 C 0. 53 db max. at -40 ~ +85 C 13.0 db min. at 200.00 ~ 400.00 MHz 94.5 ± 5.5 at 2400.00 MHz 90.0
Dimensions: [mm] Recommended Hole Pattern: [mm] Pattern Properties: Article Properties: WR-MM Male Connector with Polarization
![Dimensions: [mm] Recommended Hole Pattern: [mm] Pattern Properties: Article Properties: WR-MM Male Connector with Polarization](/thumbs/89/99419522.jpg "Dimensions: [mm] Recommended Hole Pattern: [mm] Pattern Properties: Article Properties: WR-MM Male Connector with Polarization")
Dimensions: [mm] Recommended Hole Pattern: [mm] End 2 1,27 ±0,05 2,54 ±0,20 1 2,54 ±0,30 O 0,80 L ±0,30 2,20 ±0,20 1 2,54 0,50 ±0,20 7,0 ±0,30 End 2 1,27 2,54 5,0 ±0,30 4,10 ±0,20 Pl ±0,10 L1 ±0,20 1,50
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/92/108683501.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. 1,7 Inductance L 1 khz/ 250 mv 47 µh ±20% Rated Current I R ΔT = 40 K 1.03 A max. 1,5 ±0,3
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/96/126600407.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] 8,0 ±0,3 5,0 ±0,2 12,0 ±0,5 Recommended Land Pattern: [mm] 5,4 7,0 2,9 12,8 no vias and sensitive traces underneath the component Scale - 2:1 Schematic: Electrical Properties: Properties
1. Installation Instructions
Table of Contents 1. Extension Installation Instructions 2. Shipping Rules and Restrictions 3. Shipping Carriers 4. Shipping Methods 5. Shipping Rates 6. Shipping Zones 7. Default Shipping Methods Configuration
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/93/112799635.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. 1,7 Inductance L 1 khz/ 250 mv 10 µh ±20% Rated Current I R ΔT = 40 K 1.83 A max. 1,5 ±0,3
PHASE SHIFTER. No. LFP15CE-01 P1/ Electrical Characteristics (at -40 ~ +85 C) Nominal Characteristics Impedance
No. LFP15CE-01 P1/12 PHASE SHIFTER 1. Electrical Characteristics (at -40 ~ +85 C) LFP151G9E030E111 0.70 db max. at +25 C 0. 80 db max. at -40 ~ +85 C 0.50 db max. at +25 C 0.60 db max. at -40 ~ +85 C 0.50
TMS320C6x Thermal Design Considerations
TMS320C6x Thermal Design Considerations APPLICATION REPORT: SPRA432 David Bell Digital Signal Processing Solutions April 1998 IMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes
Recommended Land Pattern: [mm] Dimensions: [mm] Article Properties: USB 2.0 Type A Horizontal SMT Short Type WR-COM
![Recommended Land Pattern: [mm] Dimensions: [mm] Article Properties: USB 2.0 Type A Horizontal SMT Short Type WR-COM](/thumbs/82/84877373.jpg "Recommended Land Pattern: [mm] Dimensions: [mm] Article Properties: USB 2.0 Type A Horizontal SMT Short Type WR-COM")
Dimensions: [mm] Recommended Land Pattern: [mm] 7 ±0,15 0,7 ±0,20 O 1,20 ±0.15 2,45 ±0,15 1,25 ±0,15 2 ±0,50 0,55 ±0,15 2,50 ±0,15 2,00 ±0,15 2,50 ±0,15 13,1 ±0,15 5,72 ±0,15 6,30 ±0,15 2 ±0,50 O 1,5 ±0,15
Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties:
![Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties:](/thumbs/89/100165192.jpg "Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties:")
Dimensions: [mm] Recommended Land Pattern: [mm] pl 1 2 1,2 ±0,1 L 4 ±0,1 Pl 3 4,6 ±0,3 14 6 3,5 2 1 2 3 11,7 ±0,2 1,4 ±0,3 13,1 Pattern Properties: Pin to Pin (Middle) p l 8 mm Article Properties: Pins
Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties:
![Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties:](/thumbs/93/111693650.jpg "Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties:")
Dimensions: [mm] Recommended Land Pattern: [mm] pl 1 2 1,2 ±0,1 L 4 ±0,1 Pl 3 4,6 ±0,3 14 6 3,5 2 1 2 3 11,7 ±0,2 1,4 ±0,3 13,1 Pattern Properties: Pin to Pin (Middle) p l 4 mm Article Properties: Pins
Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: WR-FPC SMT ZIF Horizontal Low Profile Top Contact, 1.
![Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: WR-FPC SMT ZIF Horizontal Low Profile Top Contact, 1.](/thumbs/87/97048834.jpg "Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: WR-FPC SMT ZIF Horizontal Low Profile Top Contact, 1.")
Dimensions: [mm] Recommended Land Pattern: [mm] 1,65 ±0,1 1,95 ±0,05 1 pl ±0,05 0,30 1 ±0,05 0,75 ±0,05 1 End 1 End 2 ±0,10 1 ±0,10 Pl ±0,10 0,20 ±0,05 1,30 ±0,1 L ±0,15 +0,10 L1-0,03 0,45 ±0,10 3,80 ±0,10
Recommended Hole Pattern: [mm]
![Recommended Hole Pattern: [mm]](/thumbs/94/120569035.jpg "Recommended Hole Pattern: [mm]")
Dimensions: [mm] 12,5 max. 6,5 max. 16,0 max. 25,0 min. 0,8 ±0,05 1,3 ±0,8 7,5 ±1,0 Recommended Hole Pattern: [mm] 1,3 Schematic: V O 0,9 7,5 Scale - 4:1 Electrical Properties: Properties Test conditions
Dimensions: [mm] Recommended Land Pattern: [mm] 3,5 pl 3,5 1,0 0,6. Pattern Properties: Article Properties:
![Dimensions: [mm] Recommended Land Pattern: [mm] 3,5 pl 3,5 1,0 0,6. Pattern Properties: Article Properties:](/thumbs/74/71304573.jpg "Dimensions: [mm] Recommended Land Pattern: [mm] 3,5 pl 3,5 1,0 0,6. Pattern Properties: Article Properties:")
Dimensions: [mm] Recommended Land Pattern: [mm] 3,5 pl 3,5 1,0 0,6 1 End 2,2 1 End 2,6 1,0 ±0,05 L ±0,15 L2 ±0,1 Pl ±0,1 h 0,13 0,35 ±0,05 3,00 ±0,15 1,7 General tolerance ±0,05 Pl Pl 1,7 1,7 ±0,25 7,1
Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: WR-FPC SMT ZIF Horizontal Back Locking Dual Contact, 0.
![Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: WR-FPC SMT ZIF Horizontal Back Locking Dual Contact, 0.](/thumbs/91/106880052.jpg "Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: WR-FPC SMT ZIF Horizontal Back Locking Dual Contact, 0.")
Dimensions: [mm] Recommended Land Pattern: [mm] 1,20 ±0,05 pl ±0,05 0,50 ±0,05 0,30 ±0,05 0,80 ±0,05 1 End 0,50 ±0,05 1 End 0,80 ±0,05 3,30 ±0,05 L ±0,15 0,96 ±0,10 0,40 ±0,05 Pl ±0,10 +0,08 L2-0 L1 ±0,10
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/77/75335947.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] O 0,7 Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 25 MHz 25 MHz Z 212 Ω ±25% Impedance @ 100 MHz 100 MHz Z 264 Ω ±25% Curie
Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: WR-FPC SMT ZIF Horizontal Bottom Contact, 0.
![Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: WR-FPC SMT ZIF Horizontal Bottom Contact, 0.](/thumbs/93/111693665.jpg "Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: WR-FPC SMT ZIF Horizontal Bottom Contact, 0.")
Dimensions: [mm] Recommended Land Pattern: [mm] 0,96 pl ±0,15 3,28 0,50 0,30 1,20 1 End 1 End 0,20 ±0,05 0,50 ±0,15 3,00 L ±0,15 2,10 ±0,15 2,70 General tolerance ±0,05 Pl h 0,13 Pl Pl ±0,10 L1 ±0,10 0,80
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/89/97662148.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] 5,5 ref. Solder Resist 1,7 ref. 2,15 ref. 6 ref. Electrical Properties: Properties Test conditions Value Unit Tol. Inductance L 10 khz/ 100 mv 3.3 µh ±20%
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/89/97500413.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] 3 ±0,2 10,2 ±0,3 6,3 ±0,5 Recommended Land Pattern: [mm] 10,6 3,4 2,4 5,8 2,4 Scale - 2:1 Electrical Properties: Properties Test conditions Value Unit Tol. Inductance L 100 khz/ 5 ma 11
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/93/112534821.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Inductance L 100 khz/ 250 mv 4.7 µh ±20% Rated Current I R ΔT = 40 K 6.2 A max. 3 ±0,2
Dimensions: [mm] Recommended Hole Pattern: [mm] Schematic: N. Dimensions: WS-DITV Small Compact THT Dip Switch
![Dimensions: [mm] Recommended Hole Pattern: [mm] Schematic: N. Dimensions: WS-DITV Small Compact THT Dip Switch](/thumbs/92/108730484.jpg "Dimensions: [mm] Recommended Hole Pattern: [mm] Schematic: N. Dimensions: WS-DITV Small Compact THT Dip Switch")
Dimensions: [mm] Recommended Hole Pattern: [mm] 7,62 ±0,5 2,54 L 3,5 7,62 2,54 O 0,8 3,5 3,0 Schematic: 0,5 0,25 1,9 6,2 ±0,1 1 2 3 4 N Dimensions: Properties Value Unit Poles 2 Length L 6.02 mm Flat Actuator
Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Hinge Type Bottom Contact WR-FPC
![Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Hinge Type Bottom Contact WR-FPC](/thumbs/86/93695112.jpg "Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Hinge Type Bottom Contact WR-FPC")
Dimensions: [mm] Recommended Land Pattern: [mm] 1,2 ±0,10 pl ±0,05 0,50 ±0,05 0,30 ±0,05 1,3 ±0,10 1 End 1 End 0,200 ±0,05 0,500 ±0,05 L ±0,15 2,20 ±0,10 2,00 ±0,15 0,80 ±0,10 1,8 ±0,10 h 0,1 Pl Pl Pl
Recommended Land Pattern: [mm] Stencil Suggestion:
![Recommended Land Pattern: [mm] Stencil Suggestion:](/thumbs/82/86769336.jpg "Recommended Land Pattern: [mm] Stencil Suggestion:")
Dimensions: [mm] Recommended Land Pattern: [mm] Properties: 6:1 detail B O3,2 Solder Pad Properties Value Unit Material Brass Surface Tin ±0,1 ±0,1 Bevelled edge 0,5 ±0,1 around 3,0 ±0,2 O1,85 Via Tightening
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/93/113578705.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Properties: 1 ref. 1 ref. 1,6 ref. 2,8 ±0,2 3,2 ±0,2 0,5 ref. 0,08 ref. 1,2 ref. O 0,6 ref. 1,5 ref. 1,5 ±0,2 0,3 ±0,2 1,5 4,5 2,3 1,25 Soldering Area Reserved
Package Mounting Guide SOP/QFP
Package Mounting Guide Revision 1.0 2016-03 2016-03-17 1 / 14 Rev. 1.0 2016 Toshiba Corporation Table of Contents Package Mounting Guide Preface... 4 Purpose of this document... 4 Intended Audience...
Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Top Contact WR-FPC
![Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Top Contact WR-FPC](/thumbs/91/105083509.jpg "Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Top Contact WR-FPC")
Dimensions: [mm] Recommended Land Pattern: [mm] 0,96 3,28 pl 3,28 0,50 0,30 1 End 1,20 0,2 ±0,05 0,50 ±0,15 1 End 3,00 L ±0,15 L1 ±0,10 Pl ±0,10 4,30 ±0,15 2,10 ±0,15 General tolerance ±0,05 2,70 Pl h
Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Bottom Contact WR-FPC
![Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Bottom Contact WR-FPC](/thumbs/92/110714931.jpg "Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Bottom Contact WR-FPC")
Dimensions: [mm] Recommended Land Pattern: [mm] 0,96 pl ±0,15 3,28 0,50 0,30 1,20 1 End 1 End 0,20 ±0,05 0,50 ±0,15 3,00 L ±0,15 2,10 ±0,15 2,70 General tolerance ±0,05 Pl h 0,13 Pl Pl ±0,10 L1 ±0,10 0,80
Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Vertical Type A WR-FPC
![Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Vertical Type A WR-FPC](/thumbs/87/97048895.jpg "Recommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Vertical Type A WR-FPC")
Dimensions: [mm] Recommended Land Pattern: [mm] 1,3 ±0.15 1 2 0,20 ±0.05 0,50 ±0.15 L ±0.15 Pl ±0.10 4,50 End Cap 2 ±0.15 3,4 ±0.15 Cap h 0.13 3,50 3,5 ±0.15 4,3 ±0.20 1,50 ±0,15 0,50 ±0,15 2 pl ±0,10
Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: Serie mm Screwless SMT - WR-TBL
![Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: Serie mm Screwless SMT - WR-TBL](/thumbs/87/96959859.jpg "Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: Serie mm Screwless SMT - WR-TBL")
Dimensions: [mm] Recommended Land Pattern: [mm] 1,2 ±0,30 1 End 2,4 ±0,30 2,5 ±0,10 0,10 ±0,10 Pl ±0,15 L1 ±0,15 L2 ±0,15 0,30 ±0,10 9 ±0,30 0,25 ±0,10 5 ±0,30 r 0,15 r 0,15 2,7 ±0,30 6,3 ±0,30 1 End 2,6