IECQ OPERATIONAL DOCUMENT

Size: px
Start display at page:

Download "IECQ OPERATIONAL DOCUMENT"

Transcription

1 IECQ OD 011 Edition IECQ OPERATIONAL DOCUMENT IEC Quality Assessment System for Electronic Components (IECQ System) IECQ System Fees IECQ OD 011:2012 (E)

2 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office 3, rue de Varembé CH-1211 Geneva 20 Switzerland Web: About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee, ). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by . Electropedia: The world's leading online dictionary of electronic and electrical terms containing more than terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: csc@iec.ch Tel.: Fax:

3 IECQ OD 011 Edition IECQ OPERATIONAL DOCUMENT IEC Quality Assessment System for Electronic Components (IECQ System) IECQ System Fees INTERNATIONAL ELECTROTECHNICAL COMMISSION

4 2 IECQ OD 011 IEC:2012(E) CONTENTS 1! Application Fees for New Countries, Certification Bodies and Training Bodies... 4! 1.1! Application Fee for new IECQ Member Bodies (Countries).. No Charge. 4! 1.2! Application fee for Certification Bodies seeking to become IECQ CBs.. CHF ! 1.3! Application Fee for Training Bodies seeking to become IECQ TBs.No Charge.. 4! 2! Annual Fees... 4! 2.1! Annual Fee for IECQ Member Bodies (Countries) CHF ! 2.2! Annual Fee for Certification Bodies (CBs) Regions 1 = CHF 5, ! 2.3! Annual Fee for Training Bodies (TBs):.. As detailed below... 4! 3! IECQ Certificate Fee... 5! 4! Training Fee... 5! 5! Surcharges... 5! 5.1! Background... 5! 5.1.1! Surcharges applicable to certificates... 5! 5.2! Surcharges for late payment... 5!

5 IECQ OD 011 IEC:2012(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION IECQ Operational Document 011 IECQ System Fees INTRODUCTION This Operational Document (OD) sets out the fees for participation within the Schemes of the IECQ System applicable to member countries, through their IECQ Member Body (IECQ MB), Certification Bodies (IECQ CB) and Training Bodies (IECQ TB). Fees associated with approved organisations that make use of the IECQ Schemes are considered in as much as they relate to the operation of the IECQ System. These costs DO NOT cover the actual testing, assessment and certification costs of the individual bodies. Each IECQ MB, IECQ CB and TB is free to charge its own fees for its services in a competitive environment. The IECQ System operates on a cost recovery basis to avoid placing any undue financial burden on the International Electrotechnical Commission (IEC). The Operational Fees referred to within this document are those fees that provide an income whereby a fully functional International Certification System for the global community can be maintained. The method or means by which IECQ MBs, IECQ CBs and IECQ TBs recover the annual fees is a matter for those bodies to determine Further information concerning these procedures or any other aspect of the IECQ System may be obtained by contacting the IECQ Managing Secretary via . Document History Date November 2006 March 2007 September 2010 September 2012 Original issue Summary Include website advertising and remove country application fee Changes in Surcharge fees as agreed during the 2010 IECQ MC meeting Changes in Annual TB fees, Cert Fees, Training Fees and removal of website advertising and the term NAI as agreed during the 2012 IECQ MC meeting. Address: IECQ Secretariat c/o IEC Sydney Office 286 Sussex Street Sydney NSW 2000 Australia Contact Details: IECQ Secretariat info@iecq.org Fx:

6 4 IECQ OD 011 IEC:2012(E) IECQ System Fees 1 Application Fees for New Countries, Certification Bodies and Training Bodies Application Fees are applied to Countries, candidate CBs and Training seeking to join the IECQ System and Schemes. 1.1 Application Fee for new IECQ Member Bodies (Countries).. No Charge 1.2 Application fee for Certification Bodies seeking to become IECQ CBs.. CHF Application Fee for Training Bodies seeking to become IECQ TBs.No Charge NOTES: i) The zero application fee for new TBs is in recognition of initial upfront costs of TBs to gain IECQ acceptance, e.g. RABQSA certification. ii) A new country is one that has never been a member country of the IECQ. 2 Annual Fees Annual fees apply to countries, CBs and TBs as a means of contributing to the financing of the IECQ System. These are set out in the annual IECQ Budget and posted to the IECQ Website, Current annual fees are as follows: 2.1 Annual Fee for IECQ Member Bodies (Countries)... CHF Annual Fee for Certification Bodies (CBs)... Regions 1 = CHF 5,000 Regions 2 = CHF Regions All = CHF Annual Fee for Training Bodies (TBs):..... As detailed below Year 1.. No Fee Year 2. Regions 1 = CHF 1,000 Regions 2 = CHF Regions All = CHF Year 3 and consecutive years.. Regions 1 = CHF 2,000 Regions 2 = CHF Regions All = CHF NOTES: i) Annual fees apply upon acceptance. Where acceptance falls between July and December the annual fee is 50% for the remainder of that year. ii) The three Regions are identified as Americas, Europe/Middle East/Africa and Asia-Pacific and Others

7 IECQ OD 011 IEC:2012(E) 5 3 IECQ Certificate Fee IECQ Certificate Fees apply as follows: IECQ Certificate, yearly fee, per certificate... CHF 100 The yearly fee applies to Certificates issued within all IECQ Schemes, with the exception to existing certificates under the old legacy schemes according to QC , such as Qualification Approvals. For organisations with multiple sites that wish to obtain additional site Certificates, the annual charges are CHF 100 for the Main Certificate and CHF 60 for each additional site Certificate 4 Training Fee A training fee shall apply as follows: a) IECQ Training Certificates (per Certificate)... CHF Surcharges 5.1 Background Surcharges from applicants and organisations that hold IECQ Certification whom are from non-iecq Member Countries and locations, applies as such organisations benefit by use of the IECQ System s deliverables in the same manner as manufacturers and suppliers from IECQ Member countries. A surcharge is seen as a way in which such manufacturers and suppliers provide a contribution towards the operating costs of the System Surcharges applicable to certificates Where either the Certificate Holder or site covered by an IECQ Certificate is located in a country/location where no IECQ MB exists, the following surcharge shall be collected by the IECQ CB, with the IECQ Central Office issuing an invoice to the IECQ CB, IECQ TB or IECQ MB for the following amount: IECQ Annual Surcharge... 30% of the Ann Certificate Fee Note: The Annual Surcharge fee applies annually for new and renewed certificates issued from 15 September Surcharges for late payment In noting that the timely payment of invoices prevents wasting time in chasing outstanding accounts, a penalty for late payment of outstanding invoices may be applied as a means to cover time and costs in preparing reminders and chasing outstanding amounts. The fee for late payments is set at CHF 1,000 and considered a Surcharge against the IEQC MB, IECQ CBs or IEQC TBs to whom the invoice is addressed. This fee will be added to any outstanding amounts. In such situations, the IECQ Secretariat shall issue an invoice to cover this surcharge payment. Late payment of fees may also involve the suspension of the Body concerned, which may also include the blocking of access to issuing IECQ Certificates. Where there are any questions concerning the application of the Late Fee Surcharge, e.g. where the IEQC CB, IEQC TB or IEQC MB has made efforts to pay the amounts but the fees have been received shortly after the deadline for payment, the IECQ Secretary in conjunction with the IECQ Chairman and Treasurer shall decide on their application.

8 INTERNATIONAL ELECTROTECHNICAL COMMISSION 3, rue de Varembé PO Box 131 CH-1211 Geneva 20 Switzerland Tel: Fax: info@iec.ch

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2021 Edition 2.0 2015-06-03 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) CLAIM OF COMPETENCE PART 1: ADDITION

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2011 Edition 1.4 2016-06-01 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) CBTL application form IECEE OD-2011:2016(EN)

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2054 Edition 2.0 2017-05-17 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Statement of Test Results - Hazardous

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2021 Edition 2.1 2016-06-01 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) CLAIM OF COMPETENCE PART 1: ADDITION

More information

IECQ OPERATIONAL DOCUMENT

IECQ OPERATIONAL DOCUMENT IECQ OD 3403 Edition 2.1 2017-08 IECQ OPERATIONAL DOCUMENT IEC Quality Assessment System for Electronic Components (IECQ System) Assessment Procedures for acceptance of Candidate Electronic Component Management

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2021 Edition 2.2 2017-05-17 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) CLAIM OF COMPETENCE PART 1: ADDITION

More information

IECQ PUBLICATION IECQ IEC Quality Assessment System for Electronic Components (IECQ System)

IECQ PUBLICATION IECQ IEC Quality Assessment System for Electronic Components (IECQ System) IECQ 03-2 Edition 2.1 2013-02 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Procedure Part 2: IECQ Approved Process Scheme IECQ 03-2:2013(E) THIS PUBLICATION

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2034 Edition 5.4 2017-05-17 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Operation of a Local Technical Representative

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2012 Edition 2.21 20164-06-0106-04 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Subcontracting of Testing

More information

IECRE OPERATIONAL DOCUMENT

IECRE OPERATIONAL DOCUMENT IECRE OD-551-16 Edition 1.0 2017-11-07 IECRE OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications (IECRE System) Assessment of RETLs

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2048 Edition 1.5 2017-05-17 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Utilization of Customers Testing

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2025-B Edition 1.2 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) CTF - Customers' Testing Facility CTF (CTF

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-G-4001 Edition 1.3 2013-06-20 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Guidance for Factory Inspectors

More information

IECRE OPERATIONAL DOCUMENT

IECRE OPERATIONAL DOCUMENT IECRE OD-401 Edition 2.0 2016-09-30 IECRE OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications (IECRE System) Conditional PV project

More information

IECQ PUBLICATION QC IEC Quality Assessment System for Electronic Components (IECQ System)

IECQ PUBLICATION QC IEC Quality Assessment System for Electronic Components (IECQ System) QC 080000 Edition 3.0 2012-05 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Hazardous Substance Process Management System Requirements (HSPM) QC 080000:2012(E)

More information

IECRE OPERATIONAL DOCUMENT

IECRE OPERATIONAL DOCUMENT IECRE OD501-4 Edition 1.0 2017-04-06 IECRE OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications (IECRE System) Conformity Assessment

More information

IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System)

IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) IECEx 05A Edition 2.1 2016-09 IECEx PUBLICATION IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) Guidance and Instructions for Applicants

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD IEC 62276 Edition 3.0 2016-10 Single crystal wafers for surface acoustic wave (SAW) device applications Specifications and measuring methods IEC 62276:2016-10(en) THIS PUBLICATION

More information

IEC Quality Assessment System for Electronic Components (IECQ System)

IEC Quality Assessment System for Electronic Components (IECQ System) IECQ 03-3-2 Edition 1.0 2013-02 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Procedure Part 3-2: IECQ Approved Component Products, Related Materials &

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2048 DRAFT Edition 1.23 2014-06-042015-06-033-06 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Third Party

More information

IECRE OPERATIONAL DOCUMENT

IECRE OPERATIONAL DOCUMENT IECRE OD-402 Edition 1.0 2016-05-10 IECRE OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications (IECRE System) Annual PV plant performance

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD IEC 60300-3-1 Second edition 2003-01 Dependability management Part 3-1: Application guide Analysis techniques for dependability Guide on methodology Gestion de la sûreté de fonctionnement

More information

IEC Quality Assessment System for Electronic Components (IECQ System)

IEC Quality Assessment System for Electronic Components (IECQ System) IECQ 03-3 Edition 2.1 2013-02 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Procedure Part 3: IECQ Approved Component Products, Related Materials & Assemblies

More information

IECRE OPERATIONAL DOCUMENT

IECRE OPERATIONAL DOCUMENT IECRE OD-501 Edition 1.0 2018-01-05 IECRE OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications (IECRE System) Type and Component

More information

Making the Business Case

Making the Business Case Making the Business Case Making them understand It is not always easy to show how strongly your company benefits from your participation in standardization. To facilitate your task, we have created a web

More information

IECEE OPERATIONAL DOCUMENT

IECEE OPERATIONAL DOCUMENT IECEE OD-2017 Edition 1.7 2017-09-04 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Check list for Testing and Calibration

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60812 Second edition 2006-01 Analysis techniques for system reliability Procedure for failure mode and effects analysis (FMEA) This English-language version is derived from the

More information

IEC Quality Assessment System for Electronic Components (IECQ System)

IEC Quality Assessment System for Electronic Components (IECQ System) IECQ 03-3-2 Edition 2.0 2014-12 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Prodecure Part 3-2: IECQ Approved Component Products, Related Materials &

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60300-3-1 Second edition 2003-01 Dependability management Part 3-1: Application guide Analysis techniques for dependability Guide on methodology Gestion de la sûreté de fonctionnement

More information

This document is a preview generated by EVS

This document is a preview generated by EVS CONSOLIDATED VERSION IEC 61400-1 Edition 3.1 2014-04 colour inside Wind turbines Part 1: Design requirements IEC 61400-1:2005-08+AMD1:2010-10 CSV(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 62381 First edition 2006-11 Automation systems in the process industry Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT) IEC 2006 Copyright

More information

INTERNATIONAL STANDARD NORME INTERNATIONALE

INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 62304 INTERNATIONAL STANDARD NORME INTERNATIONALE Edition 1.0 2006-05 Medical device software Software life cycle processes Logiciels de dispositifs médicaux Processus du cycle de vie du logiciel IEC

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 11600 Second edition 2002-10-01 Corrected version 2004-09-01 Building construction Jointing products Classification and requirements for sealants Construction immobilière Produits

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 62561-1 Edition 1.0 2012-02 Lightning protection system components (LPSC) Part 1: Requirements for connection components IEC 62561-1:2012(E) THIS PUBLICATION IS COPYRIGHT PROTECTED

More information

This is a preview - click here to buy the full publication GUIDE 67. Conformity assessment Fundamentals of product certification. First edition 2004

This is a preview - click here to buy the full publication GUIDE 67. Conformity assessment Fundamentals of product certification. First edition 2004 GUIDE 67 Conformity assessment Fundamentals of product certification First edition 2004 ISO 2004 ISO/IEC GUIDE 67:2004(E) This is a preview - click here to buy the full publication PDF disclaimer This

More information

ISO INTERNATIONAL STANDARD. Buildings and constructed assets Service life planning Part 10: When to assess functional performance

ISO INTERNATIONAL STANDARD. Buildings and constructed assets Service life planning Part 10: When to assess functional performance INTERNATIONAL STANDARD ISO 15686-10 First edition 2010-06-01 Buildings and constructed assets Service life planning Part 10: When to assess functional performance Bâtiments et biens immobiliers construits

More information

EMC for Product Committees: A short guide to IEC Guide 107. electromagnetic compatibility. International Electrotechnical Commission

EMC for Product Committees: A short guide to IEC Guide 107. electromagnetic compatibility. International Electrotechnical Commission EMC for Product Committees: A short guide to IEC Guide 107 electromagnetic compatibility International Electrotechnical Commission Short guide to IEC Guide 107 Introduction IEC Guide 107 is required reading

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-34802-1 Edition 3.1 IEC 60439-1:2004 Any reference to SABS IEC 60439-1 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61400-11 Second edition 2002-12 Wind turbine generator systems Part 11: Acoustic noise measurement techniques Aérogénérateurs Partie 11: Techniques de mesure du bruit acoustique

More information

ISO INTERNATIONAL STANDARD. Building construction Jointing products Specifications for test substrates

ISO INTERNATIONAL STANDARD. Building construction Jointing products Specifications for test substrates INTERNATIONAL STANDARD ISO 13640 First edition 1999-12-15 Building construction Jointing products Specifications for test substrates Construction immobilière Matériaux pour joints Prescriptions relatives

More information

This is a preview - click here to buy the full publication TECHNICAL REPORT. Wind turbine generator systems. Part 24: Lightning protection

This is a preview - click here to buy the full publication TECHNICAL REPORT. Wind turbine generator systems. Part 24: Lightning protection TECHNICAL REPORT IEC TR 61400-24 First edition 2002-07 Wind turbine generator systems Part 24: Lightning protection IEC 2002 Copyright - all rights reserved No part of this publication may be reproduced

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 62276 First edition 2005-05 Single crystal wafers for surface acoustic wave (SAW) device applications Specifications and measuring methods IEC 2005 Copyright - all rights reserved

More information

ISO INTERNATIONAL STANDARD. Equipment for crop protection Induction hoppers Part 2: General requirements and performance limits

ISO INTERNATIONAL STANDARD. Equipment for crop protection Induction hoppers Part 2: General requirements and performance limits INTERNATIONAL STANDARD ISO 21278-2 First edition 2008-11-15 Equipment for crop protection Induction hoppers Part 2: General requirements and performance limits Matériel de protection des cultures Incorporateurs

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 15549 First edition 2008-08-01 Non-destructive testing Eddy current testing General principles Essais non destructifs Contrôle par courants de Foucault Principes généraux Reference

More information

ISO INTERNATIONAL STANDARD. Welding coordination Tasks and responsibilities. Coordination en soudage Tâches et responsabilités

ISO INTERNATIONAL STANDARD. Welding coordination Tasks and responsibilities. Coordination en soudage Tâches et responsabilités INTERNATIONAL STANDARD ISO 14731 Second edition 2006-10-01 Welding coordination Tasks and responsibilities Coordination en soudage Tâches et responsabilités Reference number ISO 14731:2006(E) ISO 2006

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60502-1 Second edition 2004-04 Power cables with extruded insulation and their accessories for rated voltages from 1 kv (U m = 1,2 kv) up to 30 kv (U m = 36 kv) Part 1: Cables

More information

Information technology Security techniques Information security management systems Requirements

Information technology Security techniques Information security management systems Requirements INTERNATIONAL STANDARD ISO/IEC 27001 Second edition 2013-10-01 Information technology Security techniques Information security management systems Requirements Technologies de l information Techniques de

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 9001 Fourth edition 2008-11-15 Quality management systems Requirements Systèmes de management de la qualité Exigences Reference number ISO 9001:2008(E) ISO 2008 PDF disclaimer

More information

ISO 4986 INTERNATIONAL STANDARD. Steel castings Magnetic particle inspection. Pièces moulées en acier Contrôle par magnétoscopie

ISO 4986 INTERNATIONAL STANDARD. Steel castings Magnetic particle inspection. Pièces moulées en acier Contrôle par magnétoscopie INTERNATIONAL STANDARD ISO 4986 Second edition 2010-03-15 Steel castings Magnetic particle inspection Pièces moulées en acier Contrôle par magnétoscopie Reference number ISO 4986:2010(E) ISO 2010 PDF disclaimer

More information

ISO INTERNATIONAL STANDARD. Buildings and constructed assets Service-life planning Part 8: Reference service life and service-life estimation

ISO INTERNATIONAL STANDARD. Buildings and constructed assets Service-life planning Part 8: Reference service life and service-life estimation INTERNATIONAL STANDARD ISO 15686-8 First edition 2008-06-15 Buildings and constructed assets Service-life planning Part 8: Reference service life and service-life estimation Bâtiments et biens immobiliers

More information

ISO INTERNATIONAL STANDARD. Random sampling and randomization procedures. Modes opératoires d'échantillonnage et de répartition aléatoires

ISO INTERNATIONAL STANDARD. Random sampling and randomization procedures. Modes opératoires d'échantillonnage et de répartition aléatoires INTERNATIONAL STANDARD ISO 24153 First edition 2009-12-01 Random sampling and randomization procedures Modes opératoires d'échantillonnage et de répartition aléatoires Reference number ISO 24153:2009(E)

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION IEC TS 61400-13 First edition 2001-06 Wind turbine generator systems Part 13: Measurement of mechanical loads Aérogénérateurs Partie 13: Mesure des charges mécaniques IEC 2001 Copyright

More information

ISO 3779 INTERNATIONAL STANDARD. Road vehicles Vehicle identification number (VIN) Content and structure

ISO 3779 INTERNATIONAL STANDARD. Road vehicles Vehicle identification number (VIN) Content and structure INTERNATIONAL STANDARD ISO 3779 Fourth edition 2009-10-15 Road vehicles Vehicle identification number (VIN) Content and structure Véhicules routiers Numéro d'identification des véhicules (VIN) Contenu

More information

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for third-party marks of conformity

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for third-party marks of conformity INTERNATIONAL STANDARD ISO/IEC 17030 First edition 2003-10-01 Conformity assessment General requirements for third-party marks of conformity Évaluation de la conformité Exigences générales pour les marques

More information

ISO/IEC INTERNATIONAL STANDARD

ISO/IEC INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO/IEC 25051 First edition 2006-04-01 Software engineering Software product Quality Requirements and Evaluation (SQuaRE) Requirements for quality of Commercial Off-The-Self (COTS)

More information

ISO INTERNATIONAL STANDARD. Self-adhesive hanging devices for infusion bottles and injection vials Requirements and test methods

ISO INTERNATIONAL STANDARD. Self-adhesive hanging devices for infusion bottles and injection vials Requirements and test methods INTERNATIONAL STANDARD ISO 15137 First edition 2005-07-15 Self-adhesive hanging devices for infusion bottles and injection vials Requirements and test methods Systèmes de suspension autoadhésifs pour flacons

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61400-1 Third edition 2005-08 Wind turbines Part 1: Design requirements IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced or utilized in

More information

Guidance for Factory Inspectors Annex Special Requirements For Europe

Guidance for Factory Inspectors Annex Special Requirements For Europe IECEE OD-G-4001Annex SR-EU Ed. 1.0 FACTORY SURVEILLANCE SERVICE OPERATIONAL & RULING DOCUMENTS Guidance for Factory Inspectors Annex Special Requirements For Europe Except for IECEE members and mandated

More information

ISO 8339 INTERNATIONAL STANDARD. Building construction Sealants Determination of tensile properties (Extension to break)

ISO 8339 INTERNATIONAL STANDARD. Building construction Sealants Determination of tensile properties (Extension to break) INTERNATIONAL STANDARD ISO 8339 Second edition 2005-06-15 Building construction Sealants Determination of tensile properties (Extension to break) Construction immobilière Mastics Détermination des propriétés

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60502-2 Second edition 2005-03 Power cables with extruded insulation and their accessories for rated voltages from 1 kv (U m = 1,2 kv) up to 30 kv (U m = 36 kv) Part 2: Cables

More information

ISO INTERNATIONAL STANDARD. Cranes Stiffness Bridge and gantry cranes

ISO INTERNATIONAL STANDARD. Cranes Stiffness Bridge and gantry cranes INTERNATIONAL STANDARD ISO 22986 First edition 2007-04-15 Cranes Stiffness Bridge and gantry cranes Appareils de levage à charge suspendue Rigidité Ponts et portiques roulants Reference number ISO 22986:2007(E)

More information

ISO 638 INTERNATIONAL STANDARD. Paper, board and pulps Determination of dry matter content Oven-drying method

ISO 638 INTERNATIONAL STANDARD. Paper, board and pulps Determination of dry matter content Oven-drying method INTERNATIONAL STANDARD ISO 638 Second edition 2008-10-01 Paper, board and pulps Determination of dry matter content Oven-drying method Papiers, cartons et pâtes Détermination de la teneur en matières sèches

More information

ISO 5178 INTERNATIONAL STANDARD. Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints

ISO 5178 INTERNATIONAL STANDARD. Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints INTERNATIONAL STANDARD ISO 5178 First edition 2001-02-01 Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints Essais destructifs des soudures

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 30300 First edition 2011-11-15 Information and documentation records Fundamentals and vocabulary Information et documentation Systèmes de gestion des documents d activité Principes

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 9001 Quality management systems Requirements Systèmes de management de la qualité Exigences Fourth edition 2008-11-15 Reference number ISO 9001:2008(E) ISO 2008 PDF disclaimer

More information

ISO 3034 INTERNATIONAL STANDARD. Corrugated fibreboard Determination of single sheet thickness

ISO 3034 INTERNATIONAL STANDARD. Corrugated fibreboard Determination of single sheet thickness INTERNATIONAL STANDARD ISO 3034 Second edition 2011-06-01 Corrugated fibreboard Determination of single sheet thickness Carton ondulé Détermination de l'épaisseur d'une feuille unique Reference number

More information

ISO INTERNATIONAL STANDARD. Meat and meat products Enumeration of presumptive Pseudomonas spp.

ISO INTERNATIONAL STANDARD. Meat and meat products Enumeration of presumptive Pseudomonas spp. INTERNATIONAL STANDARD ISO 13720 Second edition 2010-08-15 Meat and meat products Enumeration of presumptive Pseudomonas spp. Viande et produits à base de viande Dénombrement des Pseudomonas spp. présomptifs

More information

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for proficiency testing

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for proficiency testing INTERNATIONAL STANDARD ISO/IEC 17043 First edition 2010-02-01 Conformity assessment General requirements for proficiency testing Évaluation de la conformité Exigences générales concernant les essais d'aptitude

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 11357-3 Second edition 2011-05-01 Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization Plastiques

More information

IECEE-ILAC-IAF Guidance for the Conduct of Unified Assessments in the Electrotechnical Sector

IECEE-ILAC-IAF Guidance for the Conduct of Unified Assessments in the Electrotechnical Sector IECEE-ILAC-IAF Guidance for the Conduct of Unified Assessments in the Electrotechnical Sector 2016-04-145-01-26 Guidance for Unified Assessments THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright IEC/IAF/ILAC

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT ISO/IEC TR 33014 First edition 2013-12-01 Information technology Process assessment Guide for process improvement Technologies de l'information Évaluation des procédés Guide de l'amélioration

More information

ISO INTERNATIONAL STANDARD. Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 5: Chemical loads

ISO INTERNATIONAL STANDARD. Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 5: Chemical loads INTERNATIONAL STANDARD ISO 16750-5 Second edition 2010-04-15 Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 5: Chemical loads Véhicules routiers Spécifications

More information

ISO INTERNATIONAL STANDARD. Cutting tools Designation of high-speed steel groups. Outils coupants Désignation des groupes d'aciers rapides

ISO INTERNATIONAL STANDARD. Cutting tools Designation of high-speed steel groups. Outils coupants Désignation des groupes d'aciers rapides INTERNATIONAL STANDARD ISO 11054 Second edition 2006-01-15 Cutting tools Designation of high-speed steel groups Outils coupants Désignation des groupes d'aciers rapides Reference number ISO 11054:2006(E)

More information

ISO INTERNATIONAL STANDARD. Quality management systems Guidelines for configuration management

ISO INTERNATIONAL STANDARD. Quality management systems Guidelines for configuration management INTERNATIONAL STANDARD ISO 10007 Second edition 2003-06-15 Quality management systems Guidelines for configuration management Systèmes de management de la qualité Lignes directrices pour la gestion de

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13284 First edition 2003-02-15 Fork-lift trucks Fork-arm extensions and telescopic fork arms Technical characteristics and strength requirements Chariots élévateurs à fourche

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 30000 First edition 2009-03-15 Ships and marine technology Ship recycling management systems Specifications for management systems for safe and environmentally sound ship recycling

More information

ISO INTERNATIONAL STANDARD. Pallets for materials handling Quality of assembly of new wooden pallets

ISO INTERNATIONAL STANDARD. Pallets for materials handling Quality of assembly of new wooden pallets INTERNATIONAL STANDARD ISO 18334 Second edition 2010-06-01 Pallets for materials handling Quality of assembly of new wooden pallets Palettes pour la manutention et le transport des marchandises Qualité

More information

Societal security Business continuity management systems Guidance

Societal security Business continuity management systems Guidance ISO 22313:2012 AS ISO 22313:2017 Societal security Business continuity management systems Guidance This Australian Standard was prepared by Committee MB-025, Security and Resilience. It was approved on

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 20653 First edition 2006-08-15 Road vehicles Degrees of protection (IP-Code) Protection of electrical equipment against foreign objects, water and access Véhicules routiers Degrés

More information

ISO 835 INTERNATIONAL STANDARD. Laboratory glassware Graduated pipettes. Verrerie de laboratoire Pipettes graduées. First edition

ISO 835 INTERNATIONAL STANDARD. Laboratory glassware Graduated pipettes. Verrerie de laboratoire Pipettes graduées. First edition INTERNATIONAL STANDARD ISO 835 First edition 2007-04-01 Laboratory glassware Graduated pipettes Verrerie de laboratoire Pipettes graduées Reference number ISO 835:2007(E) ISO 2007 PDF disclaimer This PDF

More information

ISO INTERNATIONAL STANDARD. Cranes Design calculation for rail wheels and associated trolley track supporting structure Part 1: General

ISO INTERNATIONAL STANDARD. Cranes Design calculation for rail wheels and associated trolley track supporting structure Part 1: General INTERNATIONAL STANDARD ISO 16881-1 First edition 2005-05-15 Cranes Design calculation for rail wheels and associated trolley track supporting structure Part 1: General Appareils de levage à charge suspendue

More information

ISO INTERNATIONAL STANDARD. Road vehicles Heavy commercial vehicle combinations and articulated buses Lateral stability test methods

ISO INTERNATIONAL STANDARD. Road vehicles Heavy commercial vehicle combinations and articulated buses Lateral stability test methods INTERNATIONAL STANDARD ISO 14791 First edition 2000-04-15 Road vehicles Heavy commercial vehicle combinations and articulated buses Lateral stability test methods Véhicules routiers Ensembles de véhicules

More information

ISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Downhole equipment Packers and bridge plugs

ISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Downhole equipment Packers and bridge plugs INTERNATIONAL STANDARD ISO 14310 Second edition 2008-11-01 Petroleum and natural gas industries Downhole equipment Packers and bridge plugs Industries du pétrole et du gaz naturel Équipement de fond de

More information

ISO INTERNATIONAL STANDARD. Metallic powders Determination of apparent density Part 1: Funnel method

ISO INTERNATIONAL STANDARD. Metallic powders Determination of apparent density Part 1: Funnel method INTERNATIONAL STANDARD ISO 3923-1 Third edition 2008-05-01 Metallic powders Determination of apparent density Part 1: Funnel method Poudres métalliques Détermination de la masse volumique apparente Partie

More information

ISO INTERNATIONAL STANDARD. Rubber compounding ingredients Process oils Determination of glass transition temperature by DSC

ISO INTERNATIONAL STANDARD. Rubber compounding ingredients Process oils Determination of glass transition temperature by DSC INTERNATIONAL STANDARD ISO 28343 First edition 2010-09-01 Rubber compounding ingredients Process oils Determination of glass transition temperature by DSC Ingrédients de mélange du caoutchouc Huiles de

More information

ISO/TR TECHNICAL REPORT. Information and documentation Records management Part 2: Guidelines

ISO/TR TECHNICAL REPORT. Information and documentation Records management Part 2: Guidelines TECHNICAL REPORT ISO/TR 15489-2 First edition 2001-09-15 Information and documentation Records management Part 2: Guidelines Information et documentation «Records management» Partie 2: Guide pratique Reference

More information

ISO 7401 INTERNATIONAL STANDARD. Road vehicles Lateral transient response test methods Open-loop test methods

ISO 7401 INTERNATIONAL STANDARD. Road vehicles Lateral transient response test methods Open-loop test methods INTERNATIONAL STANDARD ISO 7401 Third edition 2011-04-15 Road vehicles Lateral transient response test methods Open-loop test methods Véhicules routiers Méthodes d'essai de réponse transitoire latérale

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 14161 Second edition 2009-09-15 Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results Stérilisation des produits

More information

ISO INTERNATIONAL STANDARD. Industrial fans Tolerances, methods of conversion and technical data presentation

ISO INTERNATIONAL STANDARD. Industrial fans Tolerances, methods of conversion and technical data presentation INTERNATIONAL STANDARD ISO 13348 Second edition 2007-01-15 Industrial fans Tolerances, methods of conversion and technical data presentation Ventilateurs industriels Tolérances, méthodes de conversion

More information

ISO/IEC INTERNATIONAL STANDARD

ISO/IEC INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO/IEC 15418 Second edition 2009-02-01 Information technology Automatic identification and data capture techniques GS1 Application Identifiers and ASC MH10 Data Identifiers and

More information

ISO INTERNATIONAL STANDARD. Rigid cellular plastics Spray-applied polyurethane foam for thermal insulation Part 3: Test methods

ISO INTERNATIONAL STANDARD. Rigid cellular plastics Spray-applied polyurethane foam for thermal insulation Part 3: Test methods INTERNATIONAL STANDARD ISO 8873-3 First edition 2007-05-01 Rigid cellular plastics Spray-applied polyurethane foam for thermal insulation Part 3: Test methods Plastiques alvéolaires rigides Mousse de polyuréthanne

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 24034 Second edition 2010-10-01 Welding consumables Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys Classification Produits consommables

More information

ISO INTERNATIONAL STANDARD. Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements

ISO INTERNATIONAL STANDARD. Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3834-4 Second edition 2005-12-15 Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements Exigences

More information

ISO INTERNATIONAL STANDARD. Compressed air Part 7: Test method for viable microbiological contaminant content

ISO INTERNATIONAL STANDARD. Compressed air Part 7: Test method for viable microbiological contaminant content INTERNATIONAL STANDARD ISO 8573-7 First edition 2003-05-01 Compressed air Part 7: Test method for viable microbiological contaminant content Air comprimé Partie 7: Méthode d'essai pour la détermination

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 14161 First edition 2000-10-01 Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results Stérilisation des produits

More information

ISO Information and documentation Management systems for records Fundamentals and vocabulary

ISO Information and documentation Management systems for records Fundamentals and vocabulary Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 30300 First edition 2011-11-15 Information and documentation records Fundamentals and vocabulary Information et documentation Systèmes de gestion

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 18186 First edition 2011-12-01 Freight containers RFID cargo shipment tag system Conteneurs pour le transport de marchandises Système d étiquettes RFID d expédition de fret Reference

More information

ISO 4831 INTERNATIONAL STANDARD

ISO 4831 INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 4831 Third edition 2006-08-15 Microbiology of food and animal feeding stuffs Horizontal method for the detection and enumeration of coliforms Most probable number technique Microbiologie

More information

ISO 2965 INTERNATIONAL STANDARD

ISO 2965 INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 2965 Third edition 2009-05-15 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone

More information

ISO INTERNATIONAL STANDARD. Cutting tools Designation of high-speed steel groups. Outils coupants Désignation des groupes d'aciers rapides

ISO INTERNATIONAL STANDARD. Cutting tools Designation of high-speed steel groups. Outils coupants Désignation des groupes d'aciers rapides INTERNATIONAL STANDARD ISO 11054 Second edition 2006-01-15 Cutting tools Designation of high-speed steel groups Outils coupants Désignation des groupes d'aciers rapides Reference number ISO 11054:2006(E)

More information