150 C series Wired RTD Nickel Sensor For low temperature applications

Transcription

1 150 C series For low temperature applications Benefits & Characteristics Excellent long-term stability Simple linearization Insulated wires Vibration and temperature shock resistant Easy interchangeability Customer specific sensor available upon request Small dimensions Illustration Technical Data Operating temperature range: -60 C to +150 C Nominal resistance:* 100 Ohm at 0 C 500 Ohm at 0 C 1000 Ohm at 0 C Characteristics curve:* Nickel NJ (6370 ppm/k)** Nickel NA (6720 ppm/k)*** Long-term stability: < 0.1 % at 1000 h at max. temperature Tolerance class (dependent on temperature range):* IST AG reference T < 0 C T > 0 C Wire:* Alternative wire construction:* Recommended applied current: 1) A x t x t B x t x t C x t x t Enameled Cu wire, Ø 0.2 mm, (solderable, weldable) Enameled Cu wire, Ø 0.15 mm, (solderable, weldable) Enameled Cu wire, Ø 0.25 mm, metalized back side, (solderable, weldable) Inverted welding 1 ma at 100 Ohm 1) Self-heating must be considered 0.5 ma at 500 Ohm Other alternatives:* 0.3 ma at 1000 Ohm Metalized backside Substrate thickness 1/4

2 150 C series For low temperature applications * Customer specific alternatives available ** Nickel NJ (6370 ppm/k) 891 Ohm at 0 C only *** Nickel NA (6720 ppm/k) 120 Ohm at 0 C only Order Information - 1E (Enameled Cu wire, Ø 0.2 mm) x 2 x 1.3 Upon request ND0K E.B.025 Order code Upon request x 2 x 1.3 Upon request ND1K E.B.025 Order code Upon request 520 Upon request ND1K E.B.025 Order code Upon request x 2 x 1.3 Upon request NL1K E.B.025 Order code Upon request Order Information - 1K (Enameled Cu wire, Ø 0.15 mm) x 2 x 1.3 Upon request ND0K K.B.007 Order code Upon request x 2 x 1.3 Upon request ND1K K.B.007 Order code Upon request x 2 x 1.3 Upon request ND1K K.B.007 Order code Upon request 2/4

3 150 C series For low temperature applications x 2 x 1.3 Upon request NL1K K.B.007 Order code Upon request Nickel NJ (6370 ppm/k) Nominal resistance: 891 Ohm at 0 C x 3.8 x 1.3 NJ K.K.076 Order code Order Information - 1K (Enameled Cu wire, Ø 0.25 mm, metalized back side) x 2 x 1.3 NL1K K.B.300.M Order code /4

4 Order Information RTD Nickel Sensor Secondary reference Material N = nickel S = special TCR A = ANSI 6720 ppm/k J = 6370 ppm/k B = Balco M = 5696 ppm/k D = DIN 6180 ppm/k C = 4280 ppm/k (GOST ) L = 5000 ppm/k S = special Resistance in Ohm at 0 C Chip size in mm Operating temperature range 1 = -60 C to +150 C 2 = -60 C to +200 C 3 = -60 C to +300 C Contacts S = SIL F K = flat wire customer specific I = insulated wire K = customer specific W = wire E = enameled Cu wire F W = flat wire Tolerance class A = GOST F0.15 B = GOST F0.3 C = GOST F0.6 K = customer specific Wire length in mm Special T = substrate thickness 0.25 mm W = sintered powder M = metallized backside U = inverted welding S = special N D 1K W. A T N D 1K W. A T DTN150_E2.1 Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) Fax: +41 (0) info@ist-ag.com Web: 4/4 All mechanical dimensions are valid at 25 C ambient temperature, if not differently indicated All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics Technical changes without previous announcement as well as mistakes reserved The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes Load with extreme values during a longer period can affect the reliability The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner Typing errors and mistakes reserved Product specifications are subject to change without notice All rights reserved

5 200 C series For medium temperature applications Benefits & Characteristics Excellent long-term stability Simple linearization Connections remain in shape Vibration and temperature shock resistant Easy interchangeability Customer specific sensor available upon request Small dimensions Illustration Technical Data Operating temperature range: -60 C to +200 C Nominal resistance:* 100 Ohm at 0 C 500 Ohm at 0 C 1000 Ohm at 0 C Characteristics curve:* Nickel NJ (6370 ppm/k)** Nickel NA (6720 ppm/k)*** Long-term stability: < 0.1 % at 1000 h at max. temperature Tolerance class (dependent on temperature range):* IST AG reference T < 0 C T > 0 C A x t x t B x t x t C x t x t Wire:* Ag-wire, Ø 0.25 mm (solderable, weldable) Cu/Ag-wire, PTFE AWG30 (solderable, weldable) Cu/Ag-wire, PTFE AWG26 (solderable, weldable) Cu/Ag-wire, Ø 0.4 mm (solderable, weldable) Ni/Au flat wire, 0.2 x 0.4 mm (solderable, weldable, crimpable) CuP-SIL wire post-plated with Sn (solderable, crimpable) Alternative wire construction:* Inverted welding Recommended applied current: 1) 1 ma at 100 Ohm 1) Self-heating must be considered 0.5 ma at 500 Ohm Other alternatives:* 0.3 ma at 1000 Ohm Metalized backside 1/6

6 200 C series For medium temperature applications * Customer specific alternatives available ** Nickel NJ (6370 ppm/k) 891 Ohm at 0 C only *** Nickel NA (6720 ppm/k) 120 Ohm at 0 C only Substrate thickness Sintered powder Order Information - 2W (Ag-wire, Ø 0.25 mm) x 2 x 1.3 ND0K W.A.010 ND0K W.B.010 Order code x 2 x 1.3 ND0K W.A.015 ND0K W.B.015 Order code x 2.5 x 1.3 ND0K W.A.010 ND0K W.B.010 Order code x 5 x 1.3 Upon request ND0K W.B.010 Order code Nominal resistance: 200 Ohm at 0 C x 2 x 1.3 Upon request ND0K W.B.015 Order code Nominal resistance: 300 Ohm at 0 C x 2 x 1.3 Upon request ND0K W.B.015 Order code Nominal resistance: 500 Ohm at 0 C x 2 x 1.3 Upon request ND0K W.B.010 Order code x 2 x 1.3 ND0K W.A.015 ND0K W.B.015 Order code x 2 x 1.3 ND1K W.A.015 ND1K W.B.010 Order code x 2 x 1.3 ND1K W.A.010 ND1K W.B.010 Order code x 3.8 x 1.3 Upon request ND1K W.B.015 Order code x 2 x 1.3 Upon request ND1K W.B.015 Order code /6

7 200 C series For medium temperature applications Nominal resistance: 5000 Ohm at 0 C x 2.5 x 1.3 Upon request ND5K W.B.010 Order code x 2 x 1.3 NL1K W.A.010 NL1K W.B.010 Order code x 2.5 x 1.3 Upon request NL1K W.B.010 Order code Nominal resistance: Ohm at 0 C x 2.5 x 1.3 Upon request NL10K.525.2W.B.010 Order code Order Information - 2I (Cu/Ag-wire, AWG30, PTFE insulated) x 2.5 x 1.3 Upon request ND0K I.B.030 Order code Nickel NL (5000ppm/K) x 2 x 1.3 Upon request NL1K I.B.050 Order code x 2 x 1.3 Upon request NL1K I.B.100 Order code Order Information - 2K (Cu/Ag-wire, AWG26) x 2 x 1.3 Upon request ND1K K.B.058 Order code /6

8 200 C series For medium temperature applications x 3.8 x 1.3 Upon request ND1K K.B.026 Order code x 2 x 1.3 Upon request NL1K K.B.165 Order code x 2 x 1.3 Upon request NL1K K.B.215 Order code Order Information - 2K (Cu/Ag-wire, Ø 0.4 mm) x 2 x 1.3 Upon request ND1K K.B.007 Order code x 3.8 x 1.3 ND1K K.A.010 ND1K K.B.010 Order code x 2 x 1.3 Upon request NL1K K.B.007 Order code x 2 x 1.3 Upon request NL1K K.B.020 Order code Order Information - 2FW (Ni/Au flat wire, 0.2 x 0.4 mm (HxW) x 2 x 1.3 ND1K FW.A.007 ND1K FW.B.007 Order code /6

9 200 C series For medium temperature applications x 2.5 x 1.3 Upon request ND0K I.B.030 Order code x 2 x 1.3 NL1K FW.A.007 NL1K FW.B.007 Order code Order Information - 2S (CuP-SIL wire post-plated with Sn, 10 mm) x 5 x 0.65 Upon request ND0K S.B Order code x 3.8 x 0.65 Upon request ND0K S.B Order code Nominal resistance: 200 Ohm at 0 C x 3.8 x 0.65 Upon request ND0K S.B Order code x 2.5 x 0.65 ND1K S.A ND1K S.B Order code x 3.8 x 0.65 ND1K S.A ND1K S.B Order code Nominal resistance: 5000 Ohm at 0 C x 2.5 x 0.65 ND5K S.A ND5K S.B Order code Nominal resistance: 500 Ohm at 0 C x 3.8 x 0.65 Upon request NL0K S.B Order code /6

10 200 C series For medium temperature applications x 2.5 x 0.65 NL1K S.A NL1K S.B Order code x 2.5 x 0.65 Upon request NL1K S.B Order code x 3.8 x 0.65 Upon request NL1K S.B Order code Nominal resistance: 5000 Ohm at 0 C x 2.5 x 0.65 Upon request NL5K S.B Order code /6

11 Order Information RTD Nickel Sensor Secondary reference Material N = nickel S = special TCR A = ANSI 6720 ppm/k J = 6370 ppm/k B = Balco M = 5696 ppm/k D = DIN 6180 ppm/k C = 4280 ppm/k (GOST ) L = 5000 ppm/k S = special Resistance in Ohm at 0 C Chip size in mm Operating temperature range 1 = -60 C to +150 C 2 = -60 C to +200 C 3 = -60 C to +300 C Contacts S = SIL F K = flat wire customer specific I = insulated wire K = customer specific W = wire E = enameled Cu wire F W = flat wire Tolerance class A = GOST F0.15 B = GOST F0.3 C = GOST F0.6 K = customer specific Wire length in mm Special T = substrate thickness 0.25 mm W = sintered powder M = metallized backside U = inverted welding S = special N D 1K W. A T N D 1K W. A T DTN200_E2.1 Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) Fax: +41 (0) info@ist-ag.com Web: 7/6 All mechanical dimensions are valid at 25 C ambient temperature, if not differently indicated All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics Technical changes without previous announcement as well as mistakes reserved The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes Load with extreme values during a longer period can affect the reliability The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner Typing errors and mistakes reserved Product specifications are subject to change without notice All rights reserved

12 300 C series For high temperature applications Benefits & Characteristics Very robust connections Vibration and temperature shock resistant Easy interchangeability Wide temperature range Small dimensions Inorganic glass passivation Simple linearization Customer specific sensor available upon request Illustration Technical Data Operating temperature range: -60 C to +300 C Nominal resistance:* 100 Ohm at 0 C 500 Ohm at 0 C 1000 Ohm at 0 C Characteristics curve:* Nickel NJ (6370 ppm/k)** Nickel NA (6720 ppm/k)*** Long-term stability: < 0.1 % at 1000 h at max. temperature Tolerance class (dependent on temperature range):* IST AG reference T < 0 C T > 0 C A x t x t B x t x t C x t x t Wire:* Ni-wire, Ø 0.2 mm (solderable, weldable, crimpable) Pt/Ni-wire, Ø 0.2 mm (solderable, weldable, crimpable, brazable) Alternative wire construction:* Inverted welding Recommended applied current: 1) 1 ma at 100 Ohm 1) Self-heating must be considered 0.5 ma at 500 Ohm Other alternatives:* * Customer specific alternatives available 0.3 ma at 1000 Ohm Metalized backside Substrate thickness 1/3

13 300 C series For high temperature applications ** Nickel NJ (6370 ppm/k) 891 Ohm at 0 C only *** Nickel NA (6720 ppm/k) 120 Ohm at 0 C only Order Information - 3W (Ni-wire, Ø 0.2 mm) Size Dimensions (L x W x H in mm) Class A or class K - customer specific Class B or class K - customer specific Nickel NA (6720 ppm/k) x 2 x 1.3 NA W.K.007 Order code x 2 x 1.3 NA W.K.007 Order code x 2 x 1.3 ND0K W.A.010 ND0K W.B.010 Order code x 2 x 1.3 Upon request ND1K W.B.010 Order code x 2 x 1.3 Upon request NL0K W.B.010 Order code x 2 x 1.3 Upon request NL1K W.B.010 Order code Order Information - 3K (Pt/Ni-wire, Ø 0.2 mm) Size Dimensions (L x W x H in mm) Class K - customer specific Class K - customer specific Nickel NA (6720 ppm/k) x 2 x 1.3 NA K.K.007 NA K.K x 2 x 1.3 NA K.K /3

14 Order Information RTD Nickel Sensor Secondary reference Material N = nickel S = special TCR A = ANSI 6720 ppm/k J = 6370 ppm/k B = Balco M = 5696 ppm/k D = DIN 6180 ppm/k C = 4280 ppm/k (GOST ) L = 5000 ppm/k S = special Resistance in Ohm at 0 C Chip size in mm Operating temperature range 1 = -60 C to +150 C 2 = -60 C to +200 C 3 = -60 C to +300 C Contacts S = SIL F K = flat wire customer specific I = insulated wire K = customer specific W = wire E = enameled Cu wire F W = flat wire Tolerance class A = GOST F0.15 B = GOST F0.3 C = GOST F0.6 K = customer specific Wire length in mm Special T = substrate thickness 0.25 mm W = sintered powder M = metallized backside U = inverted welding S = special N D 1K W. A T N D 1K W. A T DTN300_E2.1 Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) Fax: +41 (0) info@ist-ag.com Web: 3/3 All mechanical dimensions are valid at 25 C ambient temperature, if not differently indicated All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics Technical changes without previous announcement as well as mistakes reserved The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes Load with extreme values during a longer period can affect the reliability The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner Typing errors and mistakes reserved Product specifications are subject to change without notice All rights reserved

15 SMD series RTD Nickel Sensor For surface mounted temperature applications Benefits & Characteristics Vibration and temperature shock resistant Reflow solderable Simple linearization Available as Tape&Reel Excellent long-term stability Customer specific sensor available upon request Low self-heating Illustration Technical Data Operating temperature range: -60 C to +150 C Nominal resistance:* 891 Ohm at 0 C Characteristics curve:* Nickel NJ (6370 ppm/k) Long-term stability: < 0.1 % at 1000 h at max. temperature Tolerance class (dependent on temperature range):* Customer specific IST AG reference K Contacts:* 2P Contacts tin-coated (100% Sn) (reflow solderable) Bondable contacts without bumps available on request Solderability: 235 C < 8 s (DIN IEC , Ta Meth. 1) Resistance to soldering heat: 1) 260 C 10 s (DIN IEC , Ta Meth. 1A) 1) The soldering process can influence accuracy Recommended applied current: 2) 2) Self-heating must be considered Other alternatives:* Packaging: 0.3 ma at 891 Ohm Substrate thickness < 100 pcs in bags > 100 pcs taped on reel (sensor side up or sensor side down) * Customer specific alternatives available 1/3

16 SMD series RTD Nickel Sensor For surface mounted temperature applications Order Information - 2P (Contacts tin-coated (100% Sn), LMP lead-free (reflow solderable) Packed in bags (< 100 pcs) Size Dimensions (L x W x H in mm) Class K - Customer specific Nickel NJ (6370 ppm/k) Nominal resistance: 891 Ohm at 0 C x 1.2 x 0.4 NJ P.K Order code Taped on reel - sensor side up or sensor side down (> 100 pcs) x 1.2 x 0.4 Sensor side up NJ P.K.S Order code x 1.2 x 0.4 Sensor side down NJ P.K.S Order code /3

17 Order Information RTD Nickel Sensor Secondary reference Material N = nickel TCR J = 6370 ppm/k Resistance in Ohm at 0 C Chip size in mm Operating temperature range 2 = -60 C to +150 C Contacts (2)P = Contacts tin-coated (100% Sn) (reflow solderable) Tolerance class K = customer specific Special S = special N J P. K. S N J P. K. S DTNSMD_E2.1 Innovative Sensor Technology IST AG, Stegrütistrasse 14, CH-9642 Ebnat-Kappel, Switzerland, Phone: +41 (0) Fax: +41 (0) info@ist-ag.com Web: 3/3 All mechanical dimensions are valid at 25 C ambient temperature, if not differently indicated All data except the mechanical dimensions only have information purposes and are not to be understood as assured characteristics Technical changes without previous announcement as well as mistakes reserved The information on this data sheet was examined carefully and will be accepted as correct; No liability in case of mistakes Load with extreme values during a longer period can affect the reliability The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner Typing errors and mistakes reserved Product specifications are subject to change without notice All rights reserved