Husky Process Equipment Contractors Guide

Transcription

1 Contractors Guide Air-Operated Double Diaphragm Pumps Product Selection Key Technical Specifications commercial, industrial, marine, mining & more

2 Introduction Pump Selection Key Graco provide durable pumping solutions for your applications. Every pump is manufactured with your productivity in mind providing you a more reliable, efficient pump! Graco offer an extended warranty on most products including the longest warranty in the industry for diaphragm pumps! The most durable diaphragm pumps! Rugged construction resists corrosion and ensures clean fluid changes Heavy-duty design offers long life, increased productivity and lower overall ownership cost Pneumatically driven for increased reliability and power on demand service Air-powered for increased reliability and lower costs No Limits. No Equals. No Problem. 30% more efficient than the market leaders Up to 5 times longer diaphragm life compared to other diaphragm pumps in its class Expanded material offering to handle endless applications Husky Pump Selection Key Part numbers are located on ID tag on centre section of all Husky diaphragm pumps. All combinations below may not be available. See specific pump listings for available combinations. NOTE * = BSP plastic in 1/2" (12.7mm) pumps >1" Plastic pumps flange connections 3" Aluminum pumps flange/npt (f) combination connections PUMP SIZE (air MOTOR TYpe AND MATERIAL) WETTED PARTS SEATS Balls DIAPHRAGM 1 = 1/4" (6.35 mm) Standard: polypropylene centre section 1 = Acetal (npt) 2 = Acetal 1 = PTFE 1 = PTFE 2 = 1/4" (6.35 mm) Remote: polypropylene centre section 2 = Poly (npt) 3 = Stainless Steel 2 = Acetal 5 = TPE 3 = 3/8" (9.52 mm) Standard: polypropylene centre section 3 = Aluminium (npt) 4 = Hardened SST 3 = Stainless Steel 6 = Santoprene 5 = 1/2" (12.7 mm) Standard: polypropylene centre section 4 = Stainless Steel (npt) 5 = TPE 4 = Hardened SST 7 = Buna N 4 = 1/2" (12.7 mm) Remote: polypropylene centre section 5 = PVDF (npt) 6 = Santoprene 5 = TPE 8 = Fluoroelastomer 5 = 3/4" (19.05 mm) Standard: polypropylene centre section 6 = Ductile Iron (npt) 7 = Buna N 6 = Santoprene G = Geolast 4 = 3/4" (19.05 mm) Remote: polypropylene centre section 8 = Fluoroelastomer 7 = Buna N 1 (25.4 mm) refer selector tool A = Acetal * (bsp) 9 = Polypropylene 8 = Fluoroelastomer B = 1-1/2" (38.1 mm) Standard: aluminium centre section B = Poly * (bsp) A = PVDF 9 = Polypropylene C = 1-1/2" (38.1 mm) Remote: aluminium centre section C = Aluminium (bsp) G = Geolast A = PVDF T = 1-1/2" (38.1 mm) Standard: stainless steel centre section D = Stainless Steel (bsp) G = Geolast U = 1-1/2 (38.1 mm) Remote: stainless steel centre section E = PVDF (bsp) B = SST with viton seal F = 2" (50.8 mm) Standard: aluminium centre section viton seal F = Ductile Iron (bsp) C = Santoprene with viton seal G = 2" (50.8 mm) Remote: aluminium centre section V = 2" (50.8 mm) Standard: stainless steel centre section W = 2 (50.8 mm) Remote: stainless steel centre section K = 3" (76.2 mm) Standard: aluminium centre section H = 2 npt Alum Extended G = 2 bsp Alum Extended D X X X X X Diaphragm Pump Wetted Seats Balls / Diaphragms Pump Size Parts Checks Ver 2.0 May11 2

3 Husky 205 / 307 / 515 / 716 Husky 205 Pump A low cost compact designed pump ideal for OEM's, printing, wastewater and plating / surface finishing. Husky 307 Pump Ideal for circulating low viscosity inks, stains and dyes, drum transfer for fluids and coolant circulation and evacuation. Husky 307 Wall-Mount w/ Siphon Feed Husky 205 Wall-Mount w/ CycleFlo Husky 307 Drum-Mount w/siphon Feed Offers true-formed PTFE and santoprene diaphragms for enhanced performance Spring check valves for superior priming in any mounting configuration Remote control option (w/ external controller) Typical fluids handled waterborne materials, paint, coatings, inks, car wash chemicals Max fluid working pressure 100 PSI (7 bar, 0.7 MPa) Max flow rate 5 gpm (18.9 lpm) Connection size 1/4 in (6.3 mm) Available in acetal, polypropylene, PVDF Centre section available in polypropylene Operates on as little as 20 PSI (1.4 bar, 0.14 MPa) Fully-groundable acetal model Easy-to-service air valve and ball checks Also ideal for waste fluid removal and on-demand batch chemical metering Typical fluids handled paints, lubricants, inks, stains, solvents, coatings and dyes Max fluid working pressure 100 PSI (7 bar, 0.7 MPa) Max flow rate 7 gpm (26.5 lpm) Connection size 3/8 in (9.52 mm) Available in acetal, polypropylene Centre section available in coated aluminium Husky 515 Pump Husky 716 Pump High flow rates in a small package for machine lube servicing, drum evacuation, plating and dip tanks, water treatment and transfer of fluids. High flow rates in a small package for machine lube servicing, cleaning fluids and detergents, plating and dip tanks, water treatment and circulation. Husky 515 Wall-Mount w/ Drum Feed Husky 716 Wall-Mount w/ Drum Feed Husky 515 Drum-Mount w/ Siphon Feed Husky 716 Drum-Mount w/ Siphon Feed The Husky 515 operates on as little as 20 PSI (1.4 bar, 0.14 MPa) Fully-groundable acetal model Easy-to-service air valve and ball checks Reliable air valve for years of dependable performance Typical fluids handled cleaning fluids, detergents, chemicals, ceramic glazes, inks Max fluid working pressure 100 PSI (7 bar, 0.7 MPa) Max flow rate 15 gpm (57 lpm) Connection size 1/2 in (12.7 mm) or 3/4 in (19.1 mm) Available in acetal, polypropylene, PVDF Centre section available polypropylene This 3/4-inch pump has an external controller for remote control capabilities No seals to leak or fail, easy-to-service air valve and ball checks Quiet running less than 85 dba with remote muffler capability for even lower noise levels Typical fluids handled oil, water and most solvents Max fluid working pressure 100 PSI (7 bar, 0.7 MPa) Max flow rate 16 gpm (61 lpm) Connection size 3/4 in (19.1 mm) Available in aluminium, stainless steel Centre section available polypropylene Ver 2.0 May11 3

4 Husky 1050 / 1590 / 2150 / 3275 Husky 1050 Pump Ideal for high flow rate applications such as drum fluid transfer, unloading fluids, chemical evacuation, ceramic glaze supply, dewatering and sump evacuation. Husky 1590 Pump Ideal for high flow rate applications such as filter press, tank stripping, bilage pumping, sand and ball mill pumping, oil transfer and skimming. Husky 1050 Floor-Mount Husky 1590 Above Ground Gravity Feed Husky 1050 Bung-Mount 1 inch (25.4 mm) pump features a stall-free, low pulsation air valve which provides a smooth and rapid changeover 30% more efficient than the market leader Typical fluids handled chemicals, contaminated surface water, inks, adhesives, varnishes, dispersions, solvents and stains, resins, concrete paints and primers Max fluid working pressure 125 PSI (8.6 bar, 0.86 MPa) Max flow rate 50 gpm (189 lpm) Connection size 1 in (38.1 mm) Available aluminum, hastelloy, stainless steel, conductive polypropylene, polypropylene, PVDF Centre section available aluminium, coated carbon steel, stainless steel, polypropylene 1-1/2 inch pump with patented, high-reliability closed centre air valve that is online serviceable and epoxy-coated air section for tough environmental conditions Lube-free operation Typical fluids handled chemicals, corrosive fluids, acids, latex, abrasive fluids, slurries and sludge Max fluid working pressure 120 PSI (8.4 bar, 0.84 MPa) Max flow rate 90 gpm (340 lpm) Connection size 1-1/2 in (38.1 mm) Available in aluminium, stainless steel, polypropylene, PVDF Centre section available in coated aluminium, stainless steel Husky 2150 Pump Ideal for applications such as drum fluid transfer, bulk fluid supply, chemical evacuation, ground water and sump evacuation and waste fluid removal. Husky 3275 Pump Ideal for high viscosity materials and applications such as chemical transfers, filter press-feed and dewatering. Husky 3275 Above Ground Gravity Feed Husky 2150 Above Ground Gravity Feed 2-inch pump with larger ports for increased flow with epoxy-coated air section for tough environmental conditions Lube-free operation Typical fluids handled acids, gases, ship cleaning, stripping chemicals, alkalies, solvents, paints and varnishes Max fluid working pressure 120 PSI (8.4 bar, 0.84 MPa) Max flow rate 150 gpm (568 lpm) Connection size 2 in (50.8 mm) Available in aluminium, stainless steel, ductile Iron, polypropylene, PVDF Centre section available in coated aluminium, stainless steel 3-inch pump has bolted leak-free flanged connections with large flow paths for handling high viscosities Heavy-duty construction Typical fluids handled chemicals, bulk paint resins and ceramic slip Max fluid work pressure 120 PSI (8.4 bar, 0.84 MPa) Max flow rate 275 gpm (1041 lpm) Connection size 3 in (76.2 mm) Available in aluminium Centre section available in coated aluminium Ver 2.0 May11 2

5 Pump Features Graco Transfer Pumps Husky Pump Features A Easy Maintenance Low internal volume reduces waste and makes clean-up easy Stainless steel bolts resist corrosion and positive positioning for easy reassembly B unique, Patented Air Valve Three-way pilot valve, no-stick operation All parts are easily accessible, no air-line lubrication required C Precision-Fitted Parts Long-wearing end bearings assure positive rod alignment and are easy to replace D Protective Exhaust Port Common port for exhaust prevents vapors in room from attacking air motor seals Easily submerges for sump or disposal operations sitting idle E Rugged Exterior Construction Construction resists corrosion, prevents leakage and ensures clean fluid changes Epoxy coated aluminum center sections, corrosion resistant centers 316 s/steel A E B D C F H G I J K F Fluid Compatibility Housings available in aluminum, stainless steel, ductile iron, polypropylene, groundable acetal or Kynar G Positive Seal Design Diaphragm firmly locked in place, formed bead acts as positive fluid seal, one thruhole H Heavy Duty Diaphragm Plates Positive grip plates virtually eliminate leakage and pull-out, saving downtime I long Lasting Rod Design 300 Series s/steel rod designed for long life and corrosion resistance - even in wet air J easy Alignment Bolted, self-aligning air and fluid sections K choice of Elastomers Wide range of seat and ball options ensure fluid compatibility and positive seal Graco Transfer Pumps ask us about transfer pumps and more... Graco Piston Transfer Pumps Excellent for abrasive, low to medium viscosity fluids and shear sensitive materials Suction tube is immersed inside the drum not the pump Quick-priming and immediate flow of product, runs dry without damaging the pump Provides air tight seal for moisture-sensitive fluids Easy-out seal for fast slide in and out of drums without disconnecting hoses Find out more at Ver 2.0 May11 5

6 Pump Design Pump Materials Husky 1050 Pump Design What makes these Husky Pumps among the Best in the Industry? Efficiency 30% more efficient than other pumps on the market Performance Delivers material up to 50 gpm (189 lpm) 20% increase in flow compared to Husky 1040 Engineering Up to 5 times longer diaphragm life compared to other double diaphragm pumps in its class Optional Features Pulse Output Cycle count capability DataTrak Runaway protection Tracks material usage D C A E B Graco pumps are designed to exceed your expectations. A Modular Air Valve Stall-free, low pulsation operation provides smooth and rapid changeover B one-piece Centre Section Eliminates air leaks for more efficient operation C Longer Diaphragm Life Up to 5x longer diaphragm life for less maintenance and downtime D Four Bolt Joint Design Bolted design provides even sealing pressure for leak-free operation E Multiple Ports Increased number of ports for installation flexibility Husky Pump Materials Available in aluminum, polypropylene, stainless steel, PVdf, conductive polypropylene and hastelloy fluid sections. we offer servicing and parts supply... Industrial Vacuums Specialised units including wet/dry and explosion proof from Delfin and Nilfisk Alto Surface Finishing Industrial grade surface finishing pumps from Graco and Wagner Pressure Cleaners Electric, petrol and diesel high pressure water cleaners from Spitwater and Gerni Sales & Enquiries After Sales Servicing Parts Supply Equipment Hire Address 4 Bain Street, Currajong Qld 4812 postal PO Box 653, Aitkenvale Qld airlesstownsville@tpg.com.au web phone 07) facsimile 07)