DR/2010. In the field or in the lab

Transcription

1

2 DR/2010 In the field or in the lab Convenient, easy to use with factory-installed procedures, unitdose reagents, illustrated manuals and on-screen prompting software available in six different languages. Uses proven Hach methods (many are USEPA 1 approved or accepted) for colorimetric analysis of more than 120 common water quality parameters. Stores and recalls data with new datalogging capabilities. Accurate data transfer by means of updated software. Reduces data-reporting errors with powerful software designed to store up to 1000 readings. Helps meet GLP 2 guidelines. Increases productivity by eliminating manual calibrations and reagent mixing and measuring. Stores up to 50 user-generated calibrations for meeting individual laboratory protocols. Rugged construction and portable battery pack enable analysts to take the DR/2010 into the field. Optional portable printer outputs results on site. Optimizes sample throughput with Pour-Thru Cell accessory. Handles a variety of sample sizes and displays readout in userselectable modes: concentration, absorbance and percent transmittance. Provides accurate, reliable readings for long-term reproducibility. 1 United States Environmental Protection Agency 2 Good Laboratory Practice 2

3 The high-performance spectrophotometer no water quality laboratory can afford to be without Meet the DR/2010 Spectrophotometer. As the successor to the popular DR/2000, the DR/2010 offers levels of performance, convenience and economy simply not available elsewhere. Significant improvements in electronics and software plus the addition of datalogging capabilities make the DR/2010 ideal for today s water quality laboratory. The DR/2010 is a microprocessorcontrolled, single beam spectrophotometer designed for colorimetric testing in the field or in the laboratory. Preprogrammed calibrations installed at the factory put more than 120 common water quality tests at your fingertips (see page 10). With a measurement range of 400 to 900 nm, the DR/2010 provides results in concentration units, percent transmittance (%T) and absorbance (ABS) units. Superior optics, sophisticated software, rugged construction, competitive pricing and incomparable ease of use make the DR/2010 ideal for quality assurance testing, environmental monitoring, application development, education and more. Maximizes productivity The DR/2010 is equipped with easy-to-use software that reduces learning time. A powerful user interface enables you to start up the DR/2010 and begin conducting analyses immediately, even if you are not an experienced user of spectrophotometers. Use any of the Hach preprogrammed calibrations to get started simply enter a three-digit program code for the test you wish to perform, scroll to the proper wavelength, insert the blank, zero the instrument, insert the sample, and read the results directly. Or store the results in the DR/2010 s memory and download the data points when you return to the laboratory. Logs 1000 data points With its datalogging capability, the DR/2010 stores up to 1000 sample readings and still has memory left over to sort your sample readings by group number, sample number, parameter and date/time. Besides helping analysts to meet GLP guidelines, datalogging saves time and eliminates the errors that stem from manual data collection. Improves efficiency Use the DR/2010 to maximize productivity. Hach simplified methods minimize sample handling, reagent measuring and waste disposal chores. Whether you are in the laboratory or out in the field, the DR/2010 will not slow you down. No elaborate setups. No lengthy warm-ups. Just turn it on and you are ready to start analysis immediately. And with the new adjustable auto-shutoff feature, the DR/2010 turns itself off after a preset idle period to conserve power. Optional accessories increase throughput and reduce manual record-keeping chores. Install the optional Pour-Thru Cell when fast throughput of samples is required. Use HachLink Software (see page 13) to transfer data from the DR/2010 and store it in text files or in a spreadsheet format. HachLink Software will help your laboratory meet GLP requirements for data collection. 3

4 DR/2010 Comprehensive solutions for your monitoring applications Powerful software enables customization Customize your DR/2010 by adding up to 50 of your own calibrations to the instrument s permanent memory. Powerful curve-fitting software allows piecewise, linear, quadratic, and cubic fits to data. The new DR/2010 software makes it easier than ever to customize the instrument and expedite meeting your laboratory s unique protocols. As new Hach tests and languages become available, you can add them by downloading the latest software upgrade from a diskette in your personal computer with just a few keystrokes. DR/2010 Optical System Photo Detector Sample Cell Mirror Light Moving Slit Prism Parabolic Mirror Switches quickly between modes Choose the photometric readout mode that suits your needs: concentration, %T Abs CONC absorbance or percent transmittance. Simply press the appropriate key on the keypad to switch between measurement modes. Within the concentration mode, alternate chemical forms can be displayed within the same program. For example, phosphate (PO 4 3 ) can be directly displayed as P 2 O 5 or P. Saves space The compact DR/2010 is just 22 x 24 cm (8.5 x 9.5"), so it won t crowd other equipment and apparatus off your bench top. Weighing just under 2 kg (4.4 lbs.), the DR/2010 takes up no more room than a laptop computer and is sturdy enough to withstand the jostling that comes with typical transport situations. Adapts quickly to field testing The powerful DR/2010 is truly a portable spectrophotometer. Use line power when you re in the laboratory, or switch to battery operation. Install D cell batteries or use the optional rechargeable battery for field operation. Light from a long-life tungsten bulb is reflected off a unique parabolic mirror and dispersed with a double pass through the high-dispersion prism. The selected wavelength is imaged onto a moving slit, ensuring more uniform spectral bandwidth. The factory-calibrated optical system provides accurate readings to 2 absorbance units. Accommodates various sample cells, sizes The DR/2010 is flexible for all your sample handling needs. Use the 1-inch (10 ml or 25 ml) sample cell for routine tasks, or install an adapter to accommodate 1-cm cells. Other adapters standard equipment with your DR/2010 include the AccuVac Adapter, 16-mm COD and Test 'N Tube Adapter, Immunoassay Tube Adapter, and the 13-mm Cell Adapter Kit. See page 13. Connects effortlessly to computer Run hard copy results by linking with a computer via the RS232 serial interface. Design enhancements have streamlined the procedure. Use the new HachLink Software (see page 13) to store, recall and record test data after it is generated or when you return to the office or laboratory. Safety and quality standards The DR/2010 is battery operated and comes with an external power supply approved by UL, CSA, and TUV. The DR/2010 is tested for European EMC Directive requirements and the CE compliance mark is applied to the product. You can be assured each instrument has been designed and manufactured under stringent quality standards because Hach Company has earned ISO 9001 registration. Warranted for one year Your DR/2010 is warranted against defective materials or workmanship for one year from date of purchase. 4

5 Portable Laboratories Uniquely Hach, these rugged laboratories are the ultimate in convenience and versatility. We have included everything you need for accurate analysis in one sturdy enclosure. Whether you are taking your DREL across town, across the country, or around the world, you will get laboratory accuracy even when the nearest laboratory bench is hundreds of kilometers away. Basic instrumentation At the heart of every DREL is a DR/2010 Spectrophotometer. Each portable laboratory includes a DR/2010, a rechargeable battery, a battery eliminator/charger, an illustrated procedures manual, a comprehensive instrument manual, and a durable carrying case. Many DRELs also include: EC10 Portable ph Meter The EC10 measures ph, temperature and millivolt potentials. The nonclogging electrode incorporates Hach One free-flowing reference junction technology. CO150 Conductivity Meter Suitable for monitoring potable water, this meter features a wide measurement range to suit most applications. Digital Titrator Fitted with specific normality titrants in interchangeable cartridges, the Digital Titrator is a precision dispensing device designed to perform titrations quickly and economically. Application-oriented DRELs save money In response to customer requests, we have configured five DRELs to meet needs for specialized water quality testing. On the following pages, you ll be introduced to the Complete Water Quality Laboratory, the Basic Water Quality Laboratory, the Soil and Irrigation Laboratory, the Aquaculture Laboratory, and the Water Conditioning Laboratory. Each of these DRELs contains the appropriate instruments, reagents, equipment and apparatus to measure a wide range of parameters associated with these special applications. You ll experience a significant cost savings by purchasing the factory configured DRELs. Design your own DREL for maximum efficiency You can also build your own DREL. From the reagent, equipment and instrument list, pick and choose those elements which most closely fit your testing needs. Or choose from 12 different equipment packages. The table below summarizes options available to you. Choose the water analysis lab that suits your needs. You ll receive a cost savings by purchasing factory-configured DREL models with reagents. DREL/2010 Model * DR/2010 Digital Titrator Procedures & Instrument Manual Carrying Case, Instrument Carrying Case, Reagents and Apparatus Conductivity Meter ph Meter Apparatus Set Reagent Set Approximate Shipping Weight 15 kg (34 lbs) 17 kg (38 lbs) 16 kg (36 lbs) 18 kg (40 lbs) 34 kg (75 lbs) 27 kg (60 lbs) 29 kg (64 lbs) 28 kg (61 lbs) 24 kg (53 lb) 33 kg (74 lb) 25 kg (54 lb) 43 kg (95 lb) *Includes 2100P Portable Turbidimeter Two-case configuration 5

6 DREL/2010 Portable Laboratories DREL/2010: Basic Water Quality Laboratory The Basic Water Quality Laboratory (Cat. No ) includes a portable turbidimeter for precise monitoring of water clarity in the field. This DREL configuration includes many of the tests and instrumentation found in the Complete Water Quality Laboratory (pages 8-9) yet it fits into one carrying case. This laboratory includes a DR/2010, EC10 Portable ph Meter, 2100P Portable Turbidimeter, Conductivity Pocket Pal and all necessary reagents and apparatus for testing 23 water quality parameters. Test Range* (mg/l) Alkalinity Bromine Calcium Carbon Dioxide Chloride 10-10,000 Chlorine, Free & Total 0-2 Chromium Copper 0-5 Dissolved Oxygen 1-10 Fluoride 0-2 Hardness Iodine 0-7 Iron, Total 0-3 Nitrogen, Ammonia Nitrate, HR 0-30 ph 0-14 ph Phosphorus, Reactive Phosphorus, Total Sulfate 0-70 Temperature -10 to 110 C Total Dissolved Solids 10 to 1990 Turbidity NTU Ship. Wt. * mg/l unless noted otherwise 24 kg (53 lb) DREL/2010: Aquaculture Laboratory Test Range* (mg/l) Alkalinity Ammonia (for saltwater) Carbon Dioxide Chloride Conductivity 0 to 199,900 µs/cm Copper g/l Dissolved Oxygen 0-10, 0-45 Hardness Nitrate 0-30 Nitrite, LR ph 0-14 ph Phosphorus, Reactive Salinity 0-80 ppt Temperature -10 to 110 o F Ship. Wt. 25 kg (54 lb) * mg/l unless noted otherwise parts per thousand The Aquaculture Laboratory (Cat. No ) is ideal for large scale operators, research workers and wildlife management personnel because of its versatility and flexibility. Suitable for both freshwater and saltwater analysis, this laboratory includes a DR/2010, EC10 Portable ph Meter, CO150 Conductivity Meter, Digital Titrator, 6 Dissolved Oxygen Sample Apparatus, and reagents and apparatus for testing 13 parameters.

7 DREL/2010: Water Conditioning Laboratory Our most comprehensive water conditioning testing system, the Water Conditioning Laboratory (Cat. No ) is designed to help you monitor 23 common parameters. Ideal for industrial water treatment facilities and water treatment consultants, this laboratory comes with a DR/2010, EC10 Portable ph Meter, CO150 Conductivity Meter, Digital Titrator, and reagents and apparatus for 23 tests. DREL/2010: Soil and Irrigation Laboratory The Soil and Irrigation Laboratory (Cat. No ) is an ideal companion for extension agents, crop consultants, fertilizer dealers and agricultural development personnel. Soil fertility analysis, site characterization and irrigation water quality analysis can be accomplished with this DREL configuration. Use it in the laboratory or in the field to test for 27 common soil and water quality parameters. Test Range* (mg/l) Alkalinity Calcium Chloride Chlorine, Free & Total Conductivity 0-199,900 µs/cm, Copper 0-5 Dissolved Oxygen 0-13 Fluoride 0-2 Hardness Iron, Total 0-3 Lead µg/l Manganese-PAN Nitrate, HR Ozone , ph 0-14 ph Phosphorus, Reactive Sulfate 0-70 Sulfite Tannin-Lignin 0-9 Temperature -10 to 110 C Total Dissolved Solids 0-19,900 Zinc 0-2 Ship. Wt. * mg/l unless noted otherwise Soil Tests 43 kg (95 lb) Range % Base Saturation 0-100% B.S. Cation Exchange Capacity 0-M* meq/100 g Exchangeable Sodium Calculation Calcium and Magnesium 0-M* meq/100 g Free-Lime Estimation Visual Analysis Gypsum Requirement 0-M* meq/100 g Lime Requirement 0-15 tons/acre (0-360 kg/ha) Nitrate-Nitrogen 0-60 ppm NO 3- -N ph 0-14 ph Phosphorus ppm P Potassium ppm K Salinity ms/cm Sulfate ppm SO 4 Soil Texture Estimation Visual Analysis Total Exchangeable Acidity 0-M* meq/100 g Irrigation Water Tests Range Alkalinity mg/l as CaCO 3 Chloride mg/l Cl - Hardness mg/l as CaCO 3 Iron mg/l Fe Nitrate, HR mg/l NO 3- -N ph 0-14 ph Phosphorus, Reactive mg/l PO 4 Potassium mg/l K Sodium Estimation Calculation Sodium Adsorption Ratio Calculation Sulfate 0-70 mg/l SO 2-4 Total Dissolved Solids Ship. Wt. * no upper limit 34 kg (75 lb) 7

8 DREL/2010 Portable Laboratories DREL/2010: Complete Water Quality Laboratory Cat. No For optimum convenience and savings, many analysts select the fully equipped DREL configuration outfitted with reagents and apparatus for 31 common water quality tests. This configuration is transported in two carrying cases: one case contains instruments while the other holds apparatus and reagents. Run these tests with the Complete Water Quality Laboratory Includes DR/2010 Spectrophotometer, CO150 Conductivity Meter, EC10 ph Meter with Hach One Electrode, instrument and reagent cases, plus reagents and apparatus for performing the following tests: Test Range* (mg/l) C I J F Acidity Alkalinity Bromine Calcium Carbon Dioxide Chloride Chlorine, Free & Total 0-2 Chromium Conductivity 0-199,900 µs/cm Copper 0-5 Dissolved Oxygen 0-13, 0-45 Fluoride 0-2 Hardness Iodine 0-7 Iron, Total 0-3 Manganese, HR 0-20 Nitrogen, Ammonia Nitrate, MR and HR 0-4.5, 0-30 Nitrite, LR ph 0-14 ph Phosphorus, Reactive Phosphorus, Total Residue, Non-filterable Salinity 0-80 ppt Silica Sodium Chromate Sulfate 0-70 Sulfide Temperature -10 to 110 C Total Dissolved Solids 0-19,900 A D E Ship. Wt. 34 kg (75 lb) * mg/l unless noted otherwise A DR/2010 Spectrophotometer C Procedures and instruments manual B Digital Titrator D CO150 Conductivity Meter E EC10 Portable ph Meter 8

9 DRELs with instrumentation only These four DRELs contain only instruments and one instrument case (see table on page 5). Order reagents, apparatus, and chemistry carrying case separately. Model -01 (Cat. No ) Includes DR/2010 and DREL instrument case only. Model -02 (Cat. No ) H Includes DR/2010, CO150 Conductivity Meter and DREL instrument case only. Model -03 (Cat. No ) Includes DR/2010, EC10 Portable ph Meter and DREL instrument case only. Model -04 (Cat. No ) Includes DR/2010, EC10 Portable ph Meter, CO150 Conductivity Meter and DREL instrument case only. G These three models also contain reagents and apparatus in a separate case. Model -10 (Cat. No ) B Includes everything in the Complete Water Quality Laboratory (Model -05) except CO150 Conductivity Meter and EC10 Portable ph Meter. Model -15 (Cat. No ) Includes everything in the Complete Water Quality Laboratory (Model -05) except EC10 Portable ph Meter. Model -17 (Cat. No ) F Battery eliminator/charger I Instrument case Includes everything in the Complete Water Quality Laboratory (Model -05) except CO150 Conductivity Meter. G H Reagents and apparatus Apparatus/chemistry case J 2100P Portable Turbidimeter (optional) 9

10 Parameters, Methods, Reagent Sets and The table below lists test ranges, methods of analysis and corresponding reagent sets for DR/2010 Spectrophotometers. The complete procedure for each test is included in the respective manual. The ranges are given for the precalibrated instrument readout; higher ranges can be analyzed by sample dilution. Test Method DR/2010 Range Cat. No. Aluminum Aluminon mg/l Aluminum Eriochrome Cyanine R mg/l Arsenic (USEPA) Silver Diethyldithiocarbamate mg/l Barium Turbidimetric mg/l Barium (AccuVac) Turbidimetric mg/l Benzotriazole UV Photolysis mg/l Boron Carmine mg/l Boron (LR) AzoMethine-H mg/l Bromine DPD mg/l Bromine (AccuVac) DPD mg/l Cadmium Dithizone 0-80 µg/l Chloride Mercuric Thiocyanate mg/l Chlorine, Free and Total RL DPD mg/l Chlorine, Free (USEPA) DPD mg/l Chlorine, Free (AccuVac) (USEPA) DPD mg/l Chlorine, Free (HR) DPD mg/l Chlorine, Free TNT DPD mg/l Chlorine, Total (USEPA) DPD mg/l Chlorine, Total (AccuVac) (USEPA) DPD mg/l Chlorine, Total (Ultra LR) DPD µg/l Chlorine, Total (HR) DPD mg/l Chlorine, Total TNT DPD mg/l Chlorine Dioxide (LR) Chlorophenol Red mg/l Chlorine Dioxide (HR) Direct Reading mg/l Chromium, Hexavalent (USEPA) 1,5-Diphenylcarbohydrazide mg/l Chromium, Hexavalent (AccuVac) (USEPA) 1,5-Diphenylcarbohydrazide mg/ Chromium, Total Alkaline Hypobromite Oxidation mg/l Cobalt PAN mg/l Color, True and Apparent APHA Pt-Co units Color, NCASI NCASI units Copper, Autocatalytic Colorimetric g/l Copper (USEPA) Bicinchoninate mg/l Copper (AccuVac) (USEPA) Bicinchoninate mg/l Copper Porphyrin µg/l Cyanide Pyridine-Pyrazalone mg/l Cyanuric Acid Turbidimetric 0-50 mg/l Detergents See Surfactants Fluoride (AccuVac) (USEPA) SPADNS mg/l Fluoride (Reagent Solution) (USEPA) SPADNS mg/l Formaldehyde MBTH µg/l Hardness, Calcium as CaCO 3 Calmagite, Colorimetric mg/l Hardness, Magnesium as CaCO 3 Calmagite, Colorimetric mg/l Hardness, Total (ULR) Chlorophosphonazo µg/l Hardness, Total (ULR) RL Chlorophosphonazo µg/l Hydrazine p-dimethylaminobenzaldehyde µg/l Hydrazine(AccuVac) p-dimethylaminobenzaldehyde µg/l Iodine DPD mg/l Iodine (AccuVac) DPD mg/l Iron, Ferrous 1,10-Phenanthroline mg/l Iron, Ferrous (AccuVac) 1,10-Phenanthroline mg/l Iron RL FerroZine mg/l Iron, Total (USEPA) FerroVer mg/l Iron, Total (AccuVac) (USEPA) FerroVer mg/l Iron, Total FerroZine mg/l Iron, Total TPTZ mg/l Iron, Total (AccuVac) TPTZ mg/l Iron, Total FerroMo, in high molybdenum samples mg/l Lead (USEPA) Dithizone µg/l Lead (LeadTrak ) Fast Column Extraction µg/l Lead AnaLig/PbEX µg/l Manganese LR PAN mg/l Manganese HR (USEPA) Periodate Oxidation mg/l Molybdenum, Molybdate (HR) (AccuVac) Mercaptoacetic Acid mg/l Molybdenum, Molybdate (HR) Mercaptoacetic Acid mg/l Molybdenum, Molybdate (LR) Ternary Complex mg/l Mercury Cold Vapor µg/l Nickel (USEPA) Heptoxime mg/l Nickel PAN mg/l Nickel, Autocatalytic Photometric g/l Nitrogen, Ammonia (LR) TNT Salicylate mg/l Nitrogen, Ammonia (HR )TNT Salicylate mg/l Nitrogen, Ammonia (USEPA) Nessler mg/l Nitrogen, Ammonia Salicylate mg/l Nitrogen, Monochloramine and Free Ammonia Salicylate mg/l Nitrogen, Monochloramine and Free Ammonia (AccuVac) Salicylate mg/l Nitrogen, Nitrate (LR) Cadmium Reduction mg/l Nitrate (MR) Cadmium Reduction mg/l Nitrate (MR) (AccuVac) Cadmium Reduction mg/l Nitrate (HR) Cadmium Reduction mg/l Nitrate (HR) (AccuVac) Cadmium Reduction mg/l

11 Ranges Parameters marked (USEPA) are USEPA-approved for reporting purposes; sample pretreatment may be required on some procedures. If no reagent set is listed for a parameter, order needed reagents and supplies separately. Test Method DR/2010 Range Cat. No. Nitrate (HR) TNT Chromotropic mg/l Nitrite TNT Diazotization mg/l Nitrite (LR) RL Diazotization µg/l Nitrite (LR) (USEPA) Diazotization mg/l Nitrite (LR) (AccuVac) (USEPA) Diazotization mg/l Nitrite (HR) Ferrous Sulfate mg/l Nitrogen, Total, Inorganic, TNT Titanium Trichloride mg/l Nitrogen, Total Inorganic TNT Salicylate mg/l Nitrogen, Total Kjeldahl Nessler mg/l Nitrogen, Total TNT Persulfate Digestion mg/l Organic Matter Dichromate 0 to 5.00% Oxygen, Dissolved (HR) (AccuVac) HRDO mg/l Oxygen, Dissolved (LR) (AccuVac) Indigo Carmine µg/l Oxygen, Dissolved (SHR) (AccuVac) SHRDO mg/l Oxygen Demand, Chemical (LR) (USEPA) Reactor Digestion mg/l * Oxygen Demand, Chemical (HR) (USEPA) Reactor Digestion mg/l * Oxygen Demand, Chemical (HR+) (USEPA) Reactor Digestion 0-15,000 mg/l * Oxygen Demand, Chemical (HR) (USEPA) Dichromate Reflux mg/l Oxygen Demand, Chemical, Mn III Manganese III mg/l * Oxygen Scavengers Carbohydrazide Iron Reduction µg/l DEHA Iron Reduction µg/l Hydroquinone Iron Reduction µg/l Iso-Asorbic (Erythorbic) Acid Iron Reduction µg/l Methylethylketoxime Iron Reduction µg/l Ozone (LR) (AccuVac) Indigo Trisulfonate mg/l Ozone (MR) (AccuVac) Indigo Trisulfonate mg/l Ozone (HR) (AccuVac) Indigo Trisulfonate mg/l PCB in Soil** Immunoassay 1 or 10 ppm Threshold Palladium N,N -Dimethyldithiooxamide mg/l Phenols (USEPA) 4-Aminoantipyrine mg/l Phosphonates Persulfate UV Oxidation mg/l Phosphonates Persulfate UV Oxidation mg/l Phosphorus, Acid Hydrolyzable Hydrolysis Pretreatment steps, to Orthophosphate see Phosphorus Phosphorus, Total Acid Persulfate Digestion below, for ranges Phosphorus, Acid Hydrolyzable TNT PhosVer mg/l Phosphorus, Reactive Molybdovanadate mg/l Phosphorus, Reactive (AccuVac) Molybdovanadate mg/l Phosphorus, Reactive Amino Acid mg/l Phosphorus, Reactive (USEPA) Ascorbic Acid mg/l Phosphorus, Reactive (AccuVac) (USEPA) Ascorbic Acid mg/l Phosphorus,Reactive (LR) RL Ascorbic Acid 0-3,000 µg/l Phosphorus,Reactive (HR) RL Molybdovanadate mg/l Phosphorus,Reactive TNT PhosVer mg/l Phosphorus, Total TNT PhosVer 3/Acid Persulfate mg/l Polyacrylic Acid Absorption Colorimetric mg/l Potassium Tetraphenylborate mg/l Quaternary Ammonium Compounds Direct Binary Complex mg/l Selenium Diaminobenzidine mg/l Silica (ULR) Heteropoly Blue µg/l Silica (ULR) RL Heteropoly Blue µg/l Silica (LR) Heteropoly Blue mg/l Silica (HR) Silicomolybdate mg/l Silver Colorimetric mg/l Sodium Chromate Direct Colorimetric 0-1,100 mg/l Sulfate (USEPA) SulfaVer 0-70 mg/l Sulfate (AccuVac) (USEPA) SulfaVer 0-70 mg/l Sulfide (USEPA) Methylene Blue mg/l Surfactants, Anionic Crystal Violet mg/l Suspended Solids Photometric mg/l Tannin & Lignin Tyrosine mg/l Tolyltriazole (See Benzotriazole) UV/Photolysis mg/l ToxTrak Toxicity Colorimetric % Inhibition TPH in Soil Immunoassay 10 and 100 ppm TPH in Water Immunoassay Varies/analyte Turbidity Attenuation Method FAU Volatile Acid Esterification mg/l Zinc (USEPA) Zincon mg/l USEPA-approved means the procedure meets all requirements of the applicable U.S. Environmental Protection Agency-approved method or has been approved as an alternate test procedure. Sample digestion or distillation may be required. *Order COD Reactor separately. LR indicates low range, MR indicates mid range, HR indicates high range and SHR indicates super high range. RL indicates Rapid Liquid TNT = Test N Tube AnaLig is a trademark of IBC Advanced Technology. **Because international shipments of standards are regulated, standards may be shipped separately. Contact Hach Company or the distributor serving your area for more information. 11

12 Accessories maximize productivity, Citizen Printer New portable printer generates hard copy, even in the field The Citizen PN60 Pocket Printer is a laser quality portable printer that weighs just one pound (0.5 kg) without the battery and only 1.5 pounds (0.7 kg) with the battery. This pocket-sized printer is easy to use, quiet and fast, producing two pages per minute. The PN60 gives you the flexibility to print on plain paper, envelopes, labels, transparencies and more. Fully compatible with virtually all MS-DOS and Windows application software, the printer has a versatile control panel that enables you to produce professional looking text, spreadsheets and graphics at the push of button. Graphics resolution is as high as 360 x 360 dpi and a built-in single sheet feeder makes printing on the road as easy as printing at your lab bench Citizen PN60 Pocket Printer Includes PN 60 Printer, serial cable, NiCd battery and two black cartridges Pour-Thru Cell, 1-inch New Pour-Thru Cell speeds high volume sampling Ideal for handling large numbers of samples, the Pour-Thru Cell speeds measurement of multiple samples, eliminates errors caused by using different unmatched sample cells, and contributes to accurate measurement of very low concentrations when high sensitivity is required. A new stand design has resulted in a more stable base. Available with either a 1-inch or 1-cm glass cell, the Pour-Thru Cell is the best solution to contamination and dilution problems Pour-Thru Cell Kit, 1 inch Pour-Thru Cell Kit, 1 cm Portable turbidimeter increases capabilities For comprehensive field testing capabilities, add a 2100P Portable Turbidimeter to your DREL/2010 Laboratory. Lightweight and rugged, the 2100P is the world s only portable turbidimeter with a ratio optical system. Convenient features include: Signal averaging to compensate for reading fluctuations Formazin calibration and standardization Built-in diagnostics accessible with one keystroke Electronic zero capability Nine sample cells, 100 ml of 4000-NTU standard, secondary standards, manual, carrying case. Two-year warranty P Portable Turbidimeter Battery Eliminator, 120 Vac Battery Eliminator, 230 Vac (with Continental European plug) Sample Filtration and Degassing Kit Microsoft, MS-DOS and Windows are trademarks of Microsoft Corp. 12

13 flexibility Back row: AccuVac Adapter; 16-mm Test 'N Tube and COD Adapter; 13- mm Adapter. Middle row: Cell Riser; 1-cm Cell Adapter; Immunoassay Adapter. Front row: 10-mL Sample Cells; 25-mL Sample Cells. Sample cell adapters The DR/2010 is flexible enough to handle many sample cell configurations. While it is designed to handle 1-inch cells, adapters for AccuVac, Test N Tube, COD, 16-mm Immunoassay and 13-mm vials are standard equipment. The 1-cm cell adapter is optional. See How to Order for details HachLink Software HachLink Software ensures data integrity Using HachLink Software will help your program meet GLP requirements for data collection. This Microsoft Windows - compatible software program enables your personal computer to capture fresh or stored data from the DR/2010 and transfer it to text files or to a spreadsheet format. HachLink Software supports up to four serial ports, so you can connect as many as four instruments to the computer at one time. The software automatically records instrument, test and sample data at the push of a button. System requirements: IBM PC/AT or compatible with 386SX processor (16 MHz or better) 4 MB of RAM Hard disk drive with 2 MB or more of free space 3.5", 1.44 MB floppy disk drive VGA graphics with 640 x 480 or higher resolution, 16 or more colors Mouse or other pointing device 9-pin serial port (or 25-pin serial port with 9-pin adapter) Windows 3.1 or later DOS 3.3 or later Computer interface cable HachLink Software Computer Interface Cable DR/2010 Carrying Case Carrying case Designed for maximum convenience, this rugged case can be purchased as an optional accessory for your DR/2010. The case is molded from polypropylene and includes inserts for storing apparatus, battery eliminator, equipment, some reagents and the DR/ DR/2010 Carrying Case 13

14 Hach Systems Integrated systems provide accuracy, convenience, quality results Most companies just offer water quality monitoring equipment. Hach gives you a complete system for analysis; which includes: Proven methods When combined with a DR/2010 Spectrophotometer, Hach s proven methods provide superior performance and rapid, reliable results. Hach laboratory methods feature high quality reagent formulations and are available in convenient reagent sets, which contain all required chemistries for performing as many as 100 tests. Responsive service and support Whether you need assistance in choosing the right system, arranging for overnight shipment, understanding a procedure, or troubleshooting an instrument, help is only a phone call away. Our staff of skilled customer service representatives, technical support specialists, distributors and service technicians are available to help you find the answers you re looking for. Illustrated procedures You don t have to be a trained chemist to get professional results with the DR/2010. Our proven, simplified methods are structured to guide you step by step through each test. In each procedure, you ll find information on sampling and storage, accuracy verification, interferences, and a complete listing of all necessary reagents. Year-round technical training Analysts travel from all over the world to Colorado (USA) to take advantage of seminars and workshops at the Hach Technical Training Center. Open to beginners and veterans alike, the two- and three-day sessions offer hands-on opportunities to test water and wastewater using advanced Hach systems*. Seminars and workshops are also available through Hach s worldwide distribution network. For information on USA and Hach Europe seminars, check the appropriate number on the reply card. *In Europe, customized training is available at the Namur, Belgium plant. Contact the Hach office or distributor in your region for details. Premeasured reagents Hach s convenient powder pillow reagents are specially formulated to streamline testing. There s no mixing. No measuring. Each pillow contains the exact amount of reagent required for one test. In some cases, Hach even combines two or more reagents in a single powder pillow to minimize preparation time. In addition, the DR/2010 incorporates some 10-mL chemistry volumes. 14

15 DR/2010 Instrument Specifications Sample specifications The Spectrophotometer shall be capable of laboratory and portable use with a four-digit liquid crystal display for three operatorselectable readout modes of absorbance, percent transmittance or concentration. Alpha-numeric prompting messages, in one of six user-selectable languages also shall be provided in the display. The instrument shall feature microprocessor control to ensure precision and stability. A touchsensitive keyboard shall be provided for operational control. Factory-installed RS232 serial interface with standard 9-pin connector shall be standard. The optical system shall be composed of a single beam, double-pass Littrow Prism monochromator, a tungsten light source and a silicon photodiode detector. The monochromator shall provide a full 400 to 900 nm wavelength range with a nominal bandwidth of 7 nm. Wavelength accuracy shall be ± 2 nm between 400 and 700 nm, ± 3 nm between 700 and 900 nm, and resolution shall be ± 1 nm. A read-only memory (ROM) shall be provided with preprogrammed calibration data for over 120 colorimetric test procedures to provide direct readout in concentration mode without the need for calculations or calibration curves. The instrument also shall provide for storage of up to 50 user-generated calibrations. Data storage and recall features shall provide for storage of up to 1000 data points. The spectrophotometer shall be constructed of impact-resistant structural plastic. Power shall be AC line power with optional battery backup operation in the event of a power failure or for portable operation. Line power shall be via a battery eliminator/charger switchable for 115/230 Vac, 50/60 Hz. Battery operation shall be via an 8 Vdc rechargeable sealed battery or a 6- battery D cell pack. Wavelength Range: 400 to 900 nm Bandwidth: 7 nm 600 nm Wavelength Accuracy: ± 2 nm, 400 to 700 nm; ± 3 nm, 700 to 900 nm Monochrometer Design: Littrow Prism, Aspheric Optics Wavelength Selection: Manual Wavelength Readout: 3-digit LCD, 0.5 cm Character Height Photometric Linearity: ± A (0 to 1 A 546 nm, Constant-on Mode) Photometric Reproducibility: ± A (0 to 1 A, Constant-on Mode) Source Lamp: Gas-filled Tungsten Detector: Silicon Photodiode, UV enhanced Data Readout: 4-digit LCD, 1.5-cm Character Height Message Display: 16 Character LCD, Dot-Matrix, 0.6-cm Character Height Operation Modes: Press-to-Read, Constant-On Readout Modes: Percent Transmittance, Absorbance, Concentration How to Order Cat.No Decimal Location: Hach Program: Automatic; User Program: Selected Readout Languages: Selectable by Menu: English, French, Spanish, German, Portuguese, Dutch External Outputs: RS232 Serial (Printer optional) Line Power: Selectable 115/230 Vac, 50/60 Hz Battery Power: Optional Rechargeable 8 Vdc Sealed or 6-Battery D Cell Pack Dimensions: 22 x 24 x 11 cm (8.75 x 9.5 x 4.375") Weight: 2 kg (4.4 lb) Shipping Weight: 6.8 kg (15.0 lb) Dynamic Range: 0 to 2 A (100 :1) Stray Light: <1% at 400 nm Bulb Life: 2000 hours, >1,000,000 Measurement Cycles Battery Weight: 1.7 kg (3.75 lb) Rechargeable Temperature Range: 0 to 40 C (32 to 104 F) Operating Range Specifications are subject to change without notice. DR/2010 Spectrophotometer complete with matched pairs of 10-mL and 25-mL sample cells, AccuVac Adapter, AccuVac Zeroing Cell, 16-mm COD/TNT Adapter Kit, Immunoassay Adapter, Outdoor Light Shield, Cell Riser, Lamp Recalibration Filter Assembly, 13-mm Adapter Kit, Battery Holder, Battery Eliminator/Charger, Dust Cover, Lamp Replacement Kit, Illustrated Instrument and Procedure Manuals Accessories Citizen PN60 Printer, Portable, with serial interface cable, battery and two black cartridges Printer Connecting Cable for PN NiCd Rechargeable Battery for PN Black Cartridges for PN HachLink Software Pour-Thru Cell Kit, 1" Pour-Thru Cell Kit, 1 cm P Portable Turbidimeter Battery Eliminator for 2100P, 120 Vac, North American plug Battery Eliminator for 2100P, 230 Vac, Continental European plug Sample Filtration and Degassing Kit for 2100P cm Cell Adapter " Sample Cells (2), unmatched, 25 ml cm Cells, matched pair " Plastic Disposable Sample Cells with caps, 12/pk " Sample Cells, matched pair, 25 ml " Sample Cells, matched pair, 10 ml Lead Acid Rechargeable Battery Lamp Assembly Lamp Replacement Kit Lamp Recalibration Filter Assembly (lamp not included) Outdoor Light Shield Immunoassay Tube Adapter Cell Riser for 10-mL Sample Cells Computer Interface Cable DR/2010 Dust Cover DR/2010 Carrying Case mm COD/TNT Adapter AccuVac Adapter mm Adapter 15

16 ISO 9001 Certified In the laboratory DR/2010 Powerful, versatile water quality analysis, in the field or in the lab! Preprogrammed calibrations for testing: Water Wastewater Chemicals Water Conditioning Agriculture Foods/Beverages Environment Boiler/Cooling Water Aquaculture Pharmaceuticals Paint and Coatings Pulp and Paper In the field In the United States, contact: HACH COMPANY P.O. Box 389 Loveland, Colorado U.S.A. Telephone: Fax: In Canada, Latin America, the Indian Subcontinent, Africa (excluding Mediterranean Africa), Southeast Asia and the Rim, contact: HACH COMPANY P.O. Box 389 Loveland, Colorado U.S.A. Telephone: Fax: Your distributor is: In Europe, the Middle East and Mediterranean Africa, contact: HACH EUROPE, S.A./N.V. Chaussée de Namur 1 B-5150 Floriffoux (Namur) Belgium Telephone: (32)(81) Fax: (32)(81) intl@hach.com Lit. No Printed in U.S.A. E812 Hach Company, 1998.