Stair Nosing CS-CL1-SN-RT(60x10)CA/YELLOW

Transcription

1 CS-CL1-SN-RT(60x10)CA/YELLOW Crystalline 1, Square Nose, Recess Type (60x10) CLEAR anodised / YELLOW insert Crystalline 1 - (comprising of epoxy-bound ceramic/abrasive insert with solid cast insert, free of PVC, halogens & solvents), Square Nose, Recess Type, overall dimensions 60x10mm, CLEAR anodised aluminium, YELLOW abrasive insert. AS :2009 compliant design with a wide range of insert colour options to enable luminance contrast compliance. Intended for installation into a recess in concrete or timber or for installation against tile. Non-slip by way of near diamond hard mineral inserts. Does NOT contain PVC, solvent, halogens & is Supplied cut to length & with countersunk holes pre-drilled. substrates/floor coverings including; concrete and tile. program which guarantees dependable output quality. 10mm 60mm Ceramic insert * This product is compliant to AS1428.1:2009 so long as an insert colour offering a minimum of 30% luminance contrast to the surrounding colour is specified. 1

2 CS-CL1-SN-RT(70x10x5)CA/WHITE Crystalline 1, Square Nose, Recess Type (70x10x5) Crystalline 1 - (comprising of epoxybound ceramic/abrasive insert with nominal insert thickness of 3 mm, free of PVC, halogens & solvents), Square Nose, Recess Type, Overall dimensions 70x10x5mm, CLEAR anodised aluminium, CRETE WHITE abrasive insert. AS :2009 compliant design with a wide range of insert colour options to enable luminance contrast. Pictured below with Crete White insert which contrast against dark surrounds. Intended for installation into a recess in oncrete/tile/paver or against floor coverings such as rubber and carpet tile. Non-slip by way of near diamond hard mineral inserts. Does not contain contain PVC, solvent, halogens & is Supplied cut to length & with countersunk holes predrilled. substrates/floor coverings including; concrete and tile. program. 46mm 70mm 5mm 2

3 CS-CL3-UW-SN-DT(75x30) Crystalline 3, UltraWear, Square Nose, Diminishing Type Standard insert colour: Black Standard aluminium finish: Clear anodised Standard length: 4 m Other insert colours available: Hi-vis Yellow, Safety Yellow, Light Grey, Marble White, Red, Green, Blue, Glow-In-The- Dark /Luminous. Material composition: Anodised aluminium with epoxybound ceramic/abrasive insert. Free of PVC, halogens & solvents. Time-proven architectural design featuring three coloured abrasive insert lines. Non-slip by way of near diamond hard mineral inserts - cast with epoxy resin. Rated for internal & external application. Product does not contain PVC, solvent, halogens & is Standard finish is clear anodised, black anodised also available request. Can be supplied cut to length & with countersunk holes. substrates/floorcoverings including; concrete, tile, timber & carpet. program which guar ntees dependable output quality. 46mm How to Specify: CS-CL3-UW-SN-DT(75x30) 70mm Product Code Aluminium Finish Finish Code Insert Colour Colour Code Clear Anodised Black Anodised CA BA Black Hi-Vis Yellow Safety Yellow Light Grey Marble Red Green Blue Luminous BLK HVY SYW LGY MBL RED GRN BLU LUM 3

4 CL4-CFS-SN-RT(75x10)CA/CA/BLK CL4-CFS-SN-RT(75x10)CA/BA/BLK Crystalline 4, Concealed Fixing System, Square Nose, Recess Type (75x10) Crystalline 4 - (comprising of epoxy-bound ceramic/ abrasive insert with nominal insert thickness of 4mm, free of PVC, halogens & solvents), Square Nose, Recess Type, 75x10mm, CLEAR anodised outer, CLEAR anodised/ BLACK inner with BLACK insert. CA/CA/BLK AS :2009 compliant design with colour options to enable luminance colour contrast. Specially engineered 2-part system allowing for fixings to be fully concealed. Concealed fixings improve aesthetics, are highly vandal resistant and prevent screws from becoming loose and rising up over time. Time-proven architectural design featuring three coloured abrasive insert lines. Non-slip by way of near diamond hard mineral inserts - cast with epoxy resin. Product does not contain PVC, solvent, halogens & is Inner insert is available in both clear & black anodised as standard. Can be supplied cut to length & with countersunk holes pre-drilled. substrates/floor coverings including; concrete and tile. program which guarantees dependable output quality. 10mm 75mm CA/BA/BLK 4

5 CS-CL4-SN-DT(75x10)BA/BLACK 5

6 Crystalline 4, Square Nose, Diminishing Type Standard insert colour: Black Standard aluminium finish: Clear anodised Standard length: 4m Other insert colours available: Hi-vis yellow, safety yellow, light grey, marble white, red, green, blue, glow-in-the-dark /luminous. Material composition: anodised aluminium with epoxybound ceramic/abrasive insert. Free of PVC, halogens & solvents. AS :2009 compliant design. Time-proven architectural design featuring three coloured abrasive insert lines. Non-slip by way of near diamond hard mineral inserts - cast with epoxy resin. Product does not contain PVC, solvent, halogens & is Standard finish is clear anodised, black anodised also available by request. Can be supplied cut to length & with countersunk holes substrates/floorcoverings including; concrete, tile, timber & carpet. program. 10mm 75mm CS-CL4-SN-DT(75x10) Clear Anodised CA Black Anodised BA Black Hi-Vis Yellow Safety Yellow Light Grey Marble Red Green Blue Luminous BLK HVY SYW LGY MBL RED GRN BLU LUM Australia Wide Tel: Fax: E: sales@c-sgroup.com.au 6

7 Crystalline 4, Square Nose, Recess Type (65x5) BLACK anodised / BLACK insert Crystalline 4 - (comprising of epoxy-bound ceramic/ abrasive insert with solid cast insert, free of PVC, halogens & solvents), Square Nose, Recess Type, overall dimensions 65x5mm, BLACK anodised aluminium, BLACK abrasive insert. AS :2009 compliant design in all-black enabling luminance contrast compliance with light to mid surrounding colours*. Intended for installation into a recess in concrete or timber or for installation against tile. Non-slip by way of near diamond hard mineral inserts. Does NOT contain PVC, solvent, halogens & is Supplied cut to length & with countersunk holes predrilled. substrates/floor coverings including; concrete and tile. program which guarantees dependable output quality. 5mm 65mm * This product is compliant to AS1428.1:2009 so long as an insert colour offering a minimum of 30% luminance contrast to the surrounding colour is specified. Australia Wide Tel: Fax: E: sales@c-sgroup.com.au 7

8 CS-CL4-SN-RT(65x5) How to Specify: Product Code Aluminium Finish Finish Code Insert Colour Colour Code 8

9 CS-CL5-UW-FN-DT(108x27) Crystalline 5, UltraWear, Square Nose, Diminishing Type Standard insert colour: Black Standard aluminium finish: Clear anodised Standard length: 4m Other insert colours available: Hi-vis Yellow, Safety Yellow, Light Grey, Marble White, Red, Green, Blue, Glow-In-The- Dark /Luminous. Material composition: Anodised aluminium with epoxybound ceramic/abrasive insert. Free of PVC, halogens & solvents. Time-proven architectural design featuring three coloured abrasive insert lines. Non-slip by way of near diamond hard mineral inserts - cast with epoxy resin. Rated for high traffic internal & external applications. Product does not contain PVC, solvents or halogens & is Standard finish is clear anodisedlack anodised available request. Can be supplied cut to length & with countersunk holes. substrates/floorcoverings including; concrete, tile, timber & carpet. control program which guarentees dependable output quality. 27mm How to Specify: 108mm Product Code Aluminium Finish Finish Code Insert Colour Colour Code CS-CL5-UW-FN-DT(108x27) Clear Anodised Black Anodised CA BA Black Hi-Vis Yellow Safety Yellow LightGrey Marble Red Green Blue Luminous BLK HVY SYW LGY MBL RED GRN BLU LUM Construction Specialties Pty Ltd Australia Wide Tel: Fax: E: sales@c-sgroup.com.au 9