Aluminothermic Welder RT3 to TW3 - Conversion. Convert RT3 Welder to TW3 Welder. Course Type. Face to Face

Transcription

1 Aluminothermic Welder RT3 to TW3 - Conversion Convert RT3 Welder to TW3 Welder. Aluminothermic welder - RT5 head wash repair - Initial RT5 head wash repair - Initial. Aluminothermic Welder TW4 - Initial Wide gap composite welds using TW process. Aluminothermic Welder TW5(a) Slab Track - Initial Slab track welds using TW process.

2 Aluminothermic Welder TW5(c) Thermit Head Repair - Initial Head repair welds using TW process. Arc Welder FCAW1 and 2 Conversion To make delegates aware of the roles and responsibilities associated with flux cored arc welding and to give them the knowledge and skills necessary to produce FCAW 1 and FCAW 2 weld repairs on the railway infrastructure. Arc Welder FCAW2 - Initial To make delegates aware of the roles and responsibilities associated with flux cored arc welding and to give them the skills necessary to produce crossing resurfacing and crossing repairs on the railway infrastructure using appropriate techniques in a range of circumstances in line with current industry standards. Arc Welder FCAW4a - Initial The course aim is to provide the underpinning knowledge and practical experience and enable candidates to demonstrate their competence in the Oxy-Fuel, gas cutting and to provide the underpinning knowledge and practical experience in the safe effective operation of an approved wire feed semi automatic welding machine to join conductor rails.

3 Arc Welder FCAW6 (BV1000) - Initial To make delegates aware of the roles and responsibilities associated with repairing plain line and crossings using the BV1000 and associated equipment. Arc Welder FCAW6a (BV1000)_Initial To make delegates aware of the roles and responsibilities associated with repairing switches using the BV1000 and associated equipment. Arc Welder MMA2 - MMA4 - Initial metal arc welding and to give them the knowledge and skills necessary to produce crossing resurfacing and crossing repairs on the railway infrastructure using appropriate techniques in a range of circumstances in line with current industry standards. Arc Welder MMA5 - Initial metal arc welding repairs to switchblades on all permissible grade rail groups on the railway infrastructure.

4 Arc Welder MMA7 (Conductor Rail - Conversion Course) - Initial metal arc welding of conductor rail on the Railway Infrastructure. Arc Welder MMA7(A) (Conductor Rail - Full Course) - Initial metal arc welding of conductor rail on the Railway Infrastructure. BOC - BTEC Inspection of Oxy-Fuel Gas Equipment To make delegates aware of the roles and responsibilities associated with the safe inspection and testing of oxy-fuel gas cutting, preheating and welding equipment and to give them the knowledge and skills necessary to enable them to test components and record information in line with current standards. FCAW4 - Conductor Rail Welding - Conversion This module is designed to train persons who are responsible for undertaking FCAW4a Joining of conductor rail as part of their duties on Network Rail Infrastructure.

5 FCAW4a - Conductor Rail Welding - Initial This module is designed to train persons who are responsible for undertaking FCAW4a Joining of conductor rail as part of their duties on Network Rail Infrastructure. Mobile Flash Butt Welding Bend Test Operator This course is designed to make delegates aware of the roles and responsibilities associated with mobile flash butt welding bend test equipment and to give them the knowledge to carry out bend tests on flash butt welds on the railway infrastructure using appropriate techniques in line with current industry standards. Pin Brazing - Initial To make delegates aware of the roles and responsibilities associated with the pin brazing process, and to give them the knowledge and skills necessary to enable them to pin braze on the Railway Infrastructure in line with current industry standards. Propane Gas Safety - Initial To make delegates aware of the roles and responsibilities associated with Propane Fuel Gas. And to give them the knowledge and skills necessary to use Propane Gas Equipment in all Permanent Way applications using appropriate techniques in a range of circumstances in line with current industry standards.

6 Rail Setter Alignment device Use of Alignment Aids. Undertake manual rail grinding activities on plain line track Delegates will be able to demonstrate an understanding of why we undertake manual rail grinding activities, and describe the acceptance criteria for manual rail grinding processes. They will have knowledge of the manual grinding process and equipment, be able to prepare equipment in line with the work requirement. demonstrate an understanding of the risks associated with manual grinding activities. The course covers the manual grinding of rails, the impact of supervisor inspection on grinding activities, how to identify any issues with the completed work, and how to communicate findings to the appropriate person Download Date: 9/11/2018