TAIZHOU ROUTE METAL PRODUCTS CO.,LTD

Transcription

1 TAIZHOU ROUTE METAL PRODUCTS CO.,LTD Stainless Steel Round Bar, Stainless Steel Angle Bar, Stainless Steel Flat Bar, Stainless Steel Square Bar, Stainless Steel Hexagon Bar, Stainless Steel Channel Bar, Stainless Steel Wire Grade: 201,303,304,304L,310,310S,316,316L,316F,321,410,416,420,420F,430,430F,431,630, 631,duplex SS2205,2207,F51,F60,329J1,JS304&JS2003 etc Standard: ASTM A 276/A 276M, A 484/A 484M, A 564/A 564M, A 582/A 582M, A 638/A 638M, A 705/A 705M etc Stainless Steel Round Bar Dia: the range of hot-rolled, pickled SS round bar is 5.5~10mm; the range of cold-drawn bright SS round bar is 2~50mm; the range of centeriess grinding bright SS round bar is 4~60mm; the range of peeled bright SS round bar is 40~300mm; the tolerance is about H9 or customized. Available length: specified length, double length, radom length, the Max must be 1000mm(for single ) Strightness variation: hot processing SS round bar 3mm/1.5m, Max 3.00mm*(Lm/1.50) cold processing SS round bar 3mm/1.5m, Max 1.50mm*(Lm/1.50) Surface settlement: hot-rolled, pickled, cold-draw, straightening, polishing, peeling, grinding or customized. The Tolerance of Dia.&shape for hot-rolled SS round bar Precision Tolerance Diameter/mm Precision Level Level Ⅰ Level Ⅱ Level Ⅲ ±0.20 ±0.30 ±0.40 >7-12 ±0.25 ±0.35 ±0.40 >20-30 ±0.30 ±0.40 ±0.50 >30-50 ±0.40 ±0.50 ±0.60 >50-80 ±0.60 ±0.70 ±0.80 > ±0.90 ±1.00 ±1.10 > ±1.20 ±1.30 ±1.10 Stainless Steel Angle Bar Length range: normal is 4m, 5m, 6m, the tolenrace +40 Straightness Variation:the curvature 4mm/m, the Max warp is 0.40% for specified length. Right angle allowable Variation: 90 ± Weight allowable variation: for weight permeter 9.0kg, weight allowable variation is ± 7.5%; for weight permeter 9.0kg, weight allowable variation is

2 ±4.5% Side allowable variation: side 150mm,the allowable variation is ±3; side 150mm,the allowable variation is ±5 Surface settlement:hot-rolled, pickled solution heat treatment for austenitic SS, annealled state for ferrite SS Mechanical propertise of Angle bar Tensile test Hardness test Heat σ 0.2 σ b Grade treatment MPa MPa δ 5% HB HRB HV AISI AISI304L SUS Solution AISI AISI316L AISI AISI Anneal AISI Stainless Steel Flat Bar Standard: ASTM A484, A246, A582, GB704,GB5215 Specification: For hot-rolled flat bar,the thickness range is 3~25mm;the width range is 20~320mm. For hot-forged flat bar,the thickness range is 20~60mm;the width range is mm. For cold-drawn flat bar, the thickness range is 3~25mm;the width range is 19~180mm.The cold drawn flat bar tolerance is H10 or customized. Surface settlement:hot-rolled,annealled,pickled,hot-forged,cold-drawn polishing,or heat treatment. Length tolerance: for the flat bar with specified length&double length, L 4m,the range is 0~+30mm;4m L 6m,the range is 0~+50mm;L>6m,the range is 0~ +70mm Straightness Variation: unless has the special demand, all the hot-rolled and cold drawn flat bar are supplied with the mechanical straightning condition. For normal level flats, the curvature 0.40%; for high class flats, the curvature 0.25%.. Stainless Steel Square Bar Standard: ASTM A 276/A 276M, A 484/A 484M, A 564/A 564M, A 582/A 582M Specification: the A/F range of stainless steel square bar are S10.0- S40.0(hot-rolled,pickled) S5.0- S60.0(cold-drawn, bright). Length range: specified length, double length, radom length, the Max must be 1000mm(for single )

3 Straightness Variation: unless has the special demand, for hot-rolled square bar the curvature 0.40%; for cold-drawn square bar, the curvature 0.10%. Surface settlement: Hot-rolled,annealled,pickled,hot-forged,cold-drawn polishing,or heat treatment. Tolerance of hot processing square bar Size(mm) Tolerance(mm) Get out of square(mm) > > > > > > > > > > > > > > > > > Stainless Steel Hexagon&Profiled Bar Specification: the A/F range of stainless steel hexagon bar are S6.0~S55.0mm(cold rolled); S6.0~S55.0mm(cold drawn); S55.0~S180.0mm(milling).Tolerance of cut- Length or multiple length is h9 or customized. Straightness Variation: when size is 7-25 mm for angle to angle, the max curvature is 2mm/m;when the size is >25mm from angle to angle, the max curvature is 1mm/m. Surface settlement: cold drawn, bright polishing, and some will be heat treatment to match demand. Tolerance of cold processing hexagon,octagon bar Size/mm Tolerance/mm 3.00~ ~ ~ ~

4 50.0~ > Stainless Steel Wire Material: 316, 316L, 321, 310, 308, 304HC, 304M, 304ES, 304, 304L, 301, 301Cu, 200Cu, 201Cu, 201Cu-1 etc. Specification: Dia.0.5mm-16mm Finish: bright,hard,soft,annealed Application: petroleum, chemical, mechanical and electrical, hardware,construction, boiler fuel gas equipment, food and medical instrument, water and heat component, ship and power plant etc Packing method:coil,spool, bundle,wooden case,etc, kg/reel Specification Tolerance ±0.002 ±0.005 ±0.006 ±0.010 ±0.015 ± ±0.003 ±0.006 ±0.009 ±0.014 ±0.022 ± ±0.004 ±0.009 ±0.013 ±0.018 ±0.030 ± ±0.005 ±0.011 ±0.018 ±0.023 ±0.035 ± ±0.007 ±0.015 ±0.022 ±0.030 ±0.050 ± ±0.009 ±0.020 ±0.028 ±0.040 ±0.062 ± ±0.011 ±0.025 ±0.035 ±0.050 ±0.075 ± ±0.013 ±0.030 ±0.045 ±0.060 ±0.090 ±0.120 Stainless Steel Channel Bar Length range: normal is 4m, 5m, 6m or customized, the tolenrace +40 Straightness Variation:the curvature 4mm/m, the Max warp is 0.40% for specified length. Right angle allowable Variation: 90 ± Finish: welded&director hot-rolled. Weight allowable variation: for weight permeter 9.0kg, weight allowable variation is ± 7.5%; for weight permeter 9.0kg, weight allowable variation is ±4.5% Side allowable variation: side 150mm,the allowable variation is ±3; side 150mm,the allowable variation is ±5 Surface settlement:hot-rolled, pickled solution heat treatment for austenitic SS, annealled state for ferrite SS Tolerance of size for Hot-rolled channel bar Spe H ±1.5 ±0.2 ±2.0 ±3.0 ±3.0 B ±1.5 ±2.0 ±2.5 ±3.0 ±3.5 D ±0.4 ±0.5 ±0.6 ±0.7 ±0.8 B.D 0.15d

5 L 5-12M 5-19M 6-19M Sincerely awaiting for your reply! Pls contact with: Website: Tel: Fax: Mob: Alibaba Trademanager: cn Mail: MSN: Skype: asianmariak Best regards, Maria K