Thermoplastics Proficiency Testing 2019

Transcription

1 Thermoplastics Proficiency Testing 2019 Inspection body We are an inspection body, reference material producer and proficiency testing (PT) provider. For a wide selection of proficiency testing schemes the DRRR is accredited acc. DIN EN ISO/IEC (please look into the appendix of our scope of accreditation). Proficiency Testing schemes that are not covered by the scope of accreditation are specially marked with ) in the product catalogue/on the homepage. In very rare individual cases an accredited proficiency testing round will not be carried out within the scope of accreditation due to technical or organizational reasons. In these rare cases the DRRR will inform the participants before the start of the proficiency testing round, thus before the sample shipment. An immediately free cancellation for the participants is possible until the date of the sample shipment. Your benefit Our proficiency testing schemes cover a wide range of tests and analysis for material testing. Thus you can benefit from our high quality standards in all important testing fields: in 2019 more than 500 accredited Proficiency testing schemes are offered By participating in our proficiency testing schemes you have an objective and independent impression of your quality and performance of your routine testing method. Your benefits taking part in DRRR proficiency testing schemes: - Participation in proficiency testing is required by several facilities - Participants can compare, assure and improve their own performance and quality - Recognition of the applied method compared to the other laboratories - Unquestionable lab performance towards customers and certification authorities - Saving costs of lab development and maintenance - Saving on the working time in the lab and many other benefits Statistical principles Depending on the distribution of the data, the following statistical methods are used for evaluation, amongst others: - sensible statistics - sensible statistics with outlier elimination (e.g. Grubbs or expert outliers) - robust statistics (Hampel-Schätzer, Q-method) Registration/information Simply brilliant, your proficiency testing with ODIN. Convenient proficiency testing participation with ODIN easy, safe and clearly Fast and easy online registration / online announcement in our online catalogue Direct management and booking of the proficiency testing Overview about the registered proficiency testing schemes Fast and secure submission of your results via ODIN Online access to individual customers reports and certificates Supervisor rights available to overview all PTs of a multi-site company saving of costs through booking and submission of your results via ODIN You can also use the following pages as a regsitration form or dowmload them on our homepage: testing/material testing/ For questions and do not hesitate to contact us! DRRR GmbH Bodmanstraße 4 D Kempten Fon: +49 (0)8 31/ Fax: +49 (0)8 31/ info@drrr.de Website: Bildquellen: istock.com/onurdongel istock.com/lilcrazyfuzzy

2 Thermoplastics Proficiency tests 2019 Dimensions of test specimens: Art. no. Standard Proficiency testing type period Price* not specified Width and Thickness of specimen (type Apr A) e.g. with caliper Mechanical properties: ISO 527-1/-2 Tensile test (modulus) Apr ISO 527-1/-2 Tensile test (strength, elongation) Apr ISO 527-1/-2 Package "Tensile test" - 3 parameters: Apr ASTM D638 Tensile test (modulus, strength, elongation) Apr ISO 527-1/-2 Tensile Test at +80 C Apr ISO 527-1/-2 Tensile Test at -30 C Apr ISO Full-notch creep test [FNCT] [NEW!] Apr ISO Tensile creep test Apr ISO 178 Flexural test (modulus) Apr ISO 178 Flexural test (flexural stress at Apr conventional deflection) ISO 178 Flexural test (strength, elongation) Apr ISO 178 Package "Flexural test" - 4 parameters: Apr ASTM D790 Flexural test (modulus, strength, elongation) Apr not specified High Speed Tensile Test by using a Apr servo-hydraulic test instrument [NEW!] ISO 604 Compression test (strength, elongation) Apr ISO 179-1/1eU Charpy unnotched impact test +23 C Apr ISO 179-1/1eA Charpy notched impact test +23 C Apr ISO Charpy impact test -30 C Apr ISO 180 Izod impact properties +23 C Apr ASTM D256 Izod impact properties +23 C [NEW!] Apr DIN Dynstat impact properties Apr DIN Dynstat 3.5 % flexural stress Apr ISO 8256 Tensile-impact test (type 1, met. A) Apr ISO Instrumented impact test Apr ASTM D3763 Instrumented impact test Apr ISO DMA - Temperature sweep and Tg Apr Specimen injection moulding (type 1A): ISO 527-1/-2 Injection moulding and tensile test Apr ISO 178 Injection moulding and flexural test Apr ISO Injection moulding and Charpy impact test Apr Cutting of specimen: ISO 527-1/-2 Cutting (type 1B) and tensile test Apr ISO 527-1/-2 Cutting (type 5A) and tensile test Apr Polyamide 6 und 6.6: - Modulus of Elasticity - Tensile strength/stress at Yield - Elong. at Tensile strength / Elong. at Yield - Flexural Modulus - Stress at conventional deflection - Flexural strength - Elongation at Flexural strength ISO 527-1/-2 Tensile test Apr ISO 178 Flexural test Apr ISO Charpy flexural impact test Apr page 2 of 8

3 Thermoplastics Proficiency tests 2019 Density Hardness Ash content: Art. no. Standard Proficiency testing type period Price* ISO Density Apr ISO Density Sep ASTM D792 Density Apr ISO 1172 Ash content Apr ISO 868 Hardness Shore D Apr ISO Ball indentation hardness Apr Rheological properties: ISO /-2 Melt flow/volume rate MFR/MVR Mar ISO /-2 Melt flow/volume rate MFR/MVR Sep ISO 1133 MFR/MVR (high temperature > 300 C) Mar ASTM D1238 Melt flow/volume rate MFR/MVR Mar ISO 307 Viscosity number (sulfuric acid) Mar ISO 307 Viscosity number (m-cresol) Mar ISO 307 Viscosity number (formic acid) Mar ISO Viscosity number of PBT Mar ISO Fluidity of plastics - capillary rheometers Mar ISO Complex shear viscosity (parallel-plate) Mar Thermal properties: ISO DSC-Analysis: Melting point and -enthalpy Mar ISO DSC-Analysis: Melting point and -enthalpy Sep ASTM D3418 DSC-Analysis: Melting point and -enthalpy Mar ISO DSC-Analysis: Glass transition temp. Mar ASTM D3418 DSC-Analysis: Glass transition temp. Mar ISO DSC-Analysis: Oxidation Induction time Mar ASTM D3895 DSC-Analysis: Oxidation Induction time Mar ISO DSC-Analysis: Crystallization kinetics Mar ISO Thermogravimetry (TGA) - filler content Mar ISO Coefficient of linear thermal expansion Apr ISO 306 Vicat softening temperature (VST) Apr ASTM D1525 Vicat softening temperature (VST) Apr ISO 75 Temperature of deflection under load Apr ASTM D648 Deflection temperature under flexural load Apr Infrared spectroscopy: not specified Quantitative Infrared spectroskopy Mar not specified Identification of plastic granulates Mar Fibre lenght (short glass fibres): [NEW!] not specified with static image analysis May (e.g. Fibreshape, FASEP) Emissions: VDA 270 Odour test (PV 3900) Mar VDA 275 Formaldehyde emission (PV 3925) Mar VDA 277 Total carbon emission (PV 3341) Mar VDA 278 Thermal desorption analysis Mar DIN Fogging/Method A Mar DIN Fogging/Method B (PV 3015) Mar It is planned to add this Proficiency Test to the scope of accreditation shortly page 3 of 8

4 Thermoplastics / paint / films Proficiency Test 2019 Surfaces plastic painting: Art. no. Standard Proficiency testing type period Price* ISO 2813 Gloss reading at 60 Mar ISO 7724 Colour measurement 8 - E, L, a, b Mar DIN DIN Colour measurement 45 - E, L, a, b Mar PV 3952 Scratch resistance Mar ISO 1518 Erichsen-Hardness pencil (in style Mar of ISO 1518 with hand-operated devices) DIN Surface energy (contact angle) Mar ISO 4287 Roughness (line) contact free Mar ISO Roughness (surface) contact free Mar ISO 4288 Roughness (profile method) Mar ISO 9352 Abrasion by abrasive wheels (Taber) Mar PV 3987 Micro scratch resistance high gloss May ISO 2409 Cross cutting test May DBL 5416 Multiple stone impact test May ISO DBL 5416 Steam jet test May ISO b Testing for coating compatibility: [NEW!] VDMA Testing for paint wetting impairment May Specification substances (LABS-conformity) Plastic films: ISO 527-1/-3 Tensile Test Mar ISO Impact resistance free-falling dart Mar ISO Tear resistance - trouser tear method Mar ISO Tear resistance - Elmendorf method Mar ASTM D5748 Puncture Resistance [NEW!] Mar ISO 4593 Film thickness Mar ISO 8295 Coefficients of friction (static/kinetic) Mar ISO T-peel test Mar DIN Sealed-seam strength Mar ASTM F1921 Hot Seal Strength (method B) Mar ISO Dimensional change on heating [NEW!] Mar ISO Water vapour transmission rate Mar ISO Gas transmission rate Mar ISO Transparency/Haze Mar DIN Adhesion strength [NEW!] Mar not specified Identification of multi layer films Mar not specified Identification of mono layer films Sep Migration testing: EN , -5 overall migration (one sided contact) Oct EN , -3 overall migration (total immersion) Nov EN , -9 overall migration (article filling) Jul Further Proficiency Tests in the field of (specific) migration can be found in the catalogue "consumer goods" or the online catalogue page 4 of 8

5 Thermoplastics / metals aluminium wheels / pipes Proficiency Test 2019 Burning behaviour / electrical properties: Art. no. Standard Proficiency testing type period Price* FMVSS 302 Burning rate (DIN 75200) Mar UL 94 HB Burning rate Mar UL 94 V Burning rate Mar EN Glow-wire ignition temperature (GWIT) Mar EN CTI Tracking Mar Light fastness / exposure to laboratory light: 280 Evaluation: Color change with grey scale and instrumentell ISO 105-B06 Light fastness (3-6 cycles) Apr ISO Light fastness - Xenon Arc light (cycle 1) Apr ASTM G155 Light fastness - Xenon Arc light (cycle 1) Apr ISO Exposure - Fluorescent UV lamps Apr ASTM G154 Exposure - Fluorescent UV lamps [NEW!] Apr DIN Sunlight simulation Apr Evaluation: Change of mechanical properties [NEW!] ISO Light fastness - Xenon Arc light (cycle 1) Apr Corrosion testing: ISO 9227 Corrosion testing NSS: Apr (5.2.2) reference specimens 48h and plates 480h (e.g. delamination, corrosion, blistering) DBL Aluminium wheels - corrosion May (Filiform and CASS) Evaluation: Mass loss of reference specimen ISO 9227 Corrosion testing CASS [NEW!] Apr ASTM B117 Salt Spray test [NEW!] Apr GMW Exterior Cyclic Corrosion [NEW!] Apr Condensation atmosphere constant humidity (CH): ISO 6270 Resistance to humidity [NEW!] Apr (e.g. delamination, corrosion, blistering) Evaluation with grey scale: [NEW!] ISO 105 A02 Assessment of the color difference on Apr ISO 105 A03 color charts using the grey scale Plastic pipes / materials for piping systems (PE): ISO /-2 Resistance to internal pressure Mar ISO Adhesion of multi layer pipes Mar ISO 9969 Thermoplastics pipes - ring stiffness Mar not specified Wall thickness of plastic pipes Mar ISO Resistance to rapid crack propagation Mar (S4 test) - "Critical Pressure" ISO Full-notch creep test [FNCT] [NEW!] Apr ISO Strain Hardening Modulus [NEW!] Apr ISO Crack growth - cracked round bar (CRB) Apr [NEW!] Water content water absorption: ISO Water content (Karl-Fischer) Apr CaH2-Methode Water content (Aquatrac ) Apr ISO 62 Water absorption Apr page 5 of 8

6 Rubber & TPE / Leather Geosynthetics Proficiency Test 2019 Rubber & TPE: Art. no. Standard Proficiency testing type period Price* ISO 2781 Density of rubber May ISO 37 Tensile test (specimen type2/s2) May ISO 37 Tensile test (specimen type3/s3a) May ASTM D412 Tensile test May ISO 34-1 Tear strength - Trouser test piece May ISO 34-1 Tear strength - Angle test piece May (without nick) ISO 34-1 Tear strength - Angle test piece May (with nick) ISO 815 Compression set May ISO Compression set at lower temperature May ISO 2285 Tension set May ISO 868 Hardness Shore A (ISO ) May ASTM D2240 Hardness Shore A May ISO 48-M IRHD-Hardness - method M May ISO 48-N IRHD-Hardness - method N May ISO 4662 Rebound resilience May ISO 4649 Abrasion resistance May ISO Glass transition of rubber May ISO 1407 Solvent extract of rubber May ISO Mooney viscosity May ISO 1817 Increase in mass (liquid B) May ISO Thermogravimetry (TGA) - black carbon May Geosynthetics (geomembrane): ISO 527-1/-3 Tensile test geosynthetics Mar ASTM D6693 Tensile test PE/PP Geomembranes Mar ASTM D1004 Tear Resistance (Graves Tear) Mar ISO Static puncture Test (CBR-Test) Mar ASTM D4833 Index Puncture Resistance Mar DIN EN Stress Crack Resistance Mar ASTM D5397 Stress Crack Resistance Mar ISO Thickness at specified pressures (20 kpa) Mar ASTM D5199 Measuring the Nominal Thickness Mar ASTM D5994 Measuring Core Thickness Mar EN Dimensional stability Mar ASTM D7466 Asperity Height Mar ISO Carbon black content (TGA) Apr ASTM D4218 Carbon black content (muffle-furnace) Mar ASTM D5596 Dispersion of Carbon Black Mar Leather: DBL 5307 Leather - burning rate Apr FMVSS ISO 3376 Tensile test (strenght, extension) [NEW!] Apr ISO Tear load - single edge tear [NEW!] Apr ISO Tear load - double edge tear [NEW!] Apr ISO 2589 Thickness [NEW!] Apr page 6 of 8

7 Foams / board Composites Proficiency Test 2019 Foams (ISO/DBL methods): Art. no. Standard Proficiency testing type period Price* ISO 845 Apparent density Apr ISO 1798 Tensile test Apr ISO 8067 Tear strength [NEW!] Apr ISO 1856 Compression set Apr ISO 3385 Fatigue constant-load pounding [NEW!] Apr ISO Compression stress value CV40 Apr DBL ISO 2439 Hardness (indentation) [NEW!] Apr DBL 5307 Burning rate Apr FMVSS 302 Foams (ASTM D3574): [NEW!] Test B1 Indentation Force Deflection Test Apr Test C Compression Force Apr Test D Compression Set Apr Test E Tensile Test Apr Test F Tear Resistance Apr Test I3 Fatigue - Constant Force Pounding Apr Test J Steam Autoclave Aging Apr Test K Dry Heat Aging Apr Test L Wet Heat Aging Apr Test N Hysteresis Loss Apr Board: [NEW!] The following methods refer to the parts of ASTM D EN 310 / Modulus in bending - bending strength Apr DBL 5472 Composites - Fibre-reinforced plastics: EN 59 Barcol hardness May ASTM D EN 2564 Fibre-, resin- and void contents [NEW!] Mai ISO Flexural properties May ISO Compressive properties May ISO tension test method May ISO Apparent interlaminar shear strength May ISO 527-1/-4 Tensile test (isotropy, anisotropy) May ISO 527-1/-5 Tensile test (unidirectional) May For regarding further dates infortmation and prices regarding please refer dates to the and last prices please page of refer this form. to the last * delivery Price for + report 40,00 / by prices postal delivery shall be net, + 40,00 plus / valueadded be net, plus prices shall value- Resins: [NEW!] ISO 2555 Apparent viscosity May ISO 3219 Viscosity rotational viscometer May page 7 of 8

8 Registration - Proficiency test In the tables above each Proficiency test has been allocated to a fixed test period respectively to a fixed time planning. Schedule 2019 Proficiency Tests with the period March 2019 Sample shipment: March 2019 Reporting Deadline: 7. June 2019 Proficiency Tests with the period April 2019 Sample shipment: April 2019 Reporting Deadline: 5. July 2019 Uniform distribution of the Proficiency Test over the year: 4 shipping dates 3 4 Proficiency Tests with the period May 2019 Sample shipment: May 2019 Reporting Deadline: 9. August 2019 Proficiency Tests with the period September 2019 Sample shipment: September 2019 Reporting Deadline: 15. November 2019 Accordingly there are also 4 dates for test result submission. Additional are required for the following tests: Additional Quantity Art.- No./ Proficiency testing type If you have further questions do not hesitate to contact us! +49(0)831/ info@drrr.de If you register for a large number of Profciency tests please contact us for special prices! Prices 2019 Report by postal delivery (+ 40,00 /Proficiency Test) An offer with the total costs is needed A Purchase order from the purchasing department will follow Registration by mail: info@drrr.de Hereby we confirm obligatorily the participation in the above mentioned test(s) and the order for the additional sample sets. date: company company (additional line) contact person street post-code /city country (if not Germany) VAT-ID-No. (if available) Deutsches Referenzbüro für Ringversuche und Referenzmaterialien Bodmannstraße Kempten Tel.: +49 (0)8 31/ Fax: +49 (0)8 31/ info@drrr.de Bildquelle: page 8 of 8