HLA/HLB Series. Specifications. Switch specifications and variations. Thin parallel hand (bush/bearing guide) Double acting

Transcription

1 FH G G S F J H2 LB2 N/ S/F Specifications Thin parallel hand (bush/bearing guide) Double acting Series Operational stroke length: HLA,, 25mm 13,, 23mm Descriptions HLA Size Cylinder bore size mm CS CS CS CS CS Actuation Working fluid Max. working pressure MPa Double acting Compressed air.7 Min. working pressure MPa.3.1 Ambient temperature C 5 to Port size Operational stroke length mm Capacity of reciprocating cm Repeatability mm.3.1 Product weight kg Lubrication Not required (when lubricating, use turbine oil Class 1 ISO VG32) Switch specifications and variations Descriptions Applications Output method Power voltage Load voltage/current Light Leakage current Maximum shock resistance Descriptions Applications Power voltage Load voltage/current Light Leakage current Maximum shock resistance Proximity 2 wire K2H/K2V Programmable controller - - to VDC, 5 to ma (Note 1) 1mA or less KH/KV Programmable controller, relay /24 VDC, 5 to 5 ma 1 VAC, 7 to ma LED (ON lighting) LED (ON lighting) 8m/s 2 - ma 24m/s 2 Proximity 3 wire K3H/K3V Programmable controller, relay NPN output to 28 VDC VDC or less, 5mA or less A or less CS Reed 2 wire K5H/K5V Programmable controller, relay, IC circuit (w/o light), serial connection 5//24 VDC, 5mA or less 1 VAC, ma or less None Note 1: Max. load current above: ma at 25 C. The current will be lower than ma if ambient temperature around switch is higher than 25 C. (5 to ma with C) 316

2 How to order Without switch HLA HLA A Model no. CS CS B Size K2H <Example of model number> -CS-K2H-R C Switch model no. Note 1 D Switch quantity Model: Thin parallel hand A Model no. : Bearing guide B Size : CS C Switch model no. : Proximity K2H switch, lead wire 1m D Switch quantity : One on open side R Note on model no. selection Note 1: Switches other than (C) switch model no. are available. (Custom order) Refer to 1 for details. How to order switch SW K2H Series How to order Symbol Descriptions A Model no. HLA Bush guide Bearing guide B Size CS CS CS C Switch model no. Axial Radial lead wire lead wire KH* KV* K5H* K5V* K2H* K2V* K3H* K3V* *Lead wire length Blank 3 5 D Switch quantity R H D Contact Reed Proximity 1m (standard) 3m (option) 5m (option) One on open side One on closed side Two Indicator 1 color indicator type Without indicator light 1 color indicator type Lead wire 2-wire 2-wire 3-wire FH G G S F J H2 LB2 N/ S/F Switch model no. (Item above C ) Thin parallel hand Hand 317

3 HLA Series Thin parallel hand (bush guide) HLA-CS standard 2- depth FH G depth MAX 6 MIN M4 HLA-CS standard G 2- depth S F J H depth LB2 N/ S/F MAX MIN Thin parallel hand Hand 31

4 HLA Series HLA-CS standard 2- depth FH G depth MAX5 MIN G S F J H2 LB2 N/ S/F 3

5 Series Thin parallel hand (bearing hand) -CS standard 2- depth FH depth G 8 MAX2 8 MIN M4 -CS standard 2- depth G S F 7 2- depth J H LB2 N/ S/F MAX42 MIN M4 Thin parallel hand Hand 321

6 Series -CS standard 2- depth FH depth 7 52 G 43 MAX55 MIN G S F J H2 LB2 N/ S/F 322

7 Series FH G G S F J H2 LB2 N/ S/F Internal structure and parts list No HLA-CS to CS -CS to CS Parts name Body Master key Piston Cam Cylinder guard Magnet holder Guide rod Magnet Small diameter sphere bearing Bush Piston packing seal Material Aluminum alloy Aluminum alloy Acetar resin Aluminum alloy Gripping power performance data Sintering oil impregnated alloy Nitrile rubber Gripping power that functions to open and closed directions with jaw length of hand at supply pressure.3,.5 and.7 MPa is shown. Both open direction ( ) closed direction ( ) (shown with continuous line) (Note) Grip performance data indicates the grip for one jaw. Since two jaws are used, double the grip in the graph when making a selection Remarks No Parts name Snap ring Bush Parallel pin Needle roller A Needle roller B Cylinder gasket Master key Bearing guide A Bearing guide B Cross roller Truss machine screw HLA-CS HLA-CS 8 Material Sintering oil impregnated alloy Nitrile rubber HLA-CS 5 Remarks CS CS -CS