ANGLO BUILDING PRODUCTS LTD BRANKSOME HOUSE, FILMER GROVE, GODALMING, SURREY GU7 3AB TEL: FAX:

Transcription

1 ANGLO BUILDING PRODUCTS LTD BRANKSOME HOUSE, FILMER GROVE, GODALMING, SURREY GU7 3AB TEL: FAX: MATERIAL SAFETY DATA SHEET PAGE: 1/ 3 REVISION (1): 27/02/96 1 PRODUCT NAME: Speed Patch - Primer & Emulsion 2 CHEMICAL COMPOSITION: Styrene acrylic emulsion containing calcium chloride CAS No. Wt% Symbol R Phrases Calcium chloride >5% Xi 36 3 HAZARDS IDENTIFICATION: May cause eye irritation. 4 FIRST AID MEASURES: 4.1 General Advice: Inhalation: Remove patient to fresh air. 4.3 Eye Contact: Wash with water and seek medical attention. 4.4 Skin Contact: Wash off while wet. 4.5 Ingestion: Give plenty of water to drink and seek medical attention. 5 FIRE PRECAUTIONS: 6 SPILLAGE: 5.1 Extinguishing Media: Extinguishing Media NOT to be used: Product Combustion Hazards: CO, carbon dioxide, acrid smoke. 5.4 Special Protective Equipment for Firefighters: Personal Precautions: Do not eat, drink or smoke while using. 6.2 Environmental Precautions: Do not allow to enter drains or open water courses. 6.3 Removal of Spillage: Absorb in earth or sand and place in a suitable container. 6.4 Further Advice: - 7 HANDLING & STORAGE: 7.1 Safe Handling: Good standards of personal hygiene. Do not heat or spray in enclosed areas. 7.2 Safe Storage: In sealed containers at ambient temperature.

2 PRODUCT: SPEED PATCH - PRIMER & EMULSION PAGE: 2/ 3 REVISION (1): 27/02/96 8 PERSONAL PROTECTION: 8.1 Respiratory Protection: Hand Protection: Gloves. 8.3 Eye Protection: Safety glasses recommended. 8.4 Skin Protection: Industrial clothing. 9 PHYSICAL & CHEMICAL PROPERTIES: 9.1 Appearance: Liquid 9.2 Odour: Ammoniacal 9.3 Colour: Various 9.4 Boiling Point/Range: 100 C Flash Point: - Auto Ignition Temp: - Oxidising Properties: - Relative Density: > 1.0 g / c.c. Melting Point/Range: - Flammability(solid, gas): - Explosive Limits: - Vapour Pressure: - Water Solubility: Miscible Other Data: - Solvent Content: - 10 STABILITY & REACTIVITY: 10.1 Conditions to avoid: Materials to avoid: Hazardous Decomposition Products: CO, carbon dioxide, acrid smoke. 11 TOXICOLOGICAL INFORMATION: 11.1 Toxicity: LD50 Oral: - LD50 Skin: - Skin Irritation: - Sensitisation: - Inhalation: - Recommended Exposure Limit: - 12 ECOLOGICAL INFORMATION: - 13 SAFE DISPOSAL: 13.1 Product: Dispose of with respect to local Byelaws Container: Dispose of with respect to local Byelaws.

3 PRODUCT: SPEED PATCH - PRIMER & EMULSION PAGE: 3/ 3 REVISION (1): 27/02/96 14 TRANSPORT INFORMATION: Not classified as hazardous for transport Hazard Class: Packing Group: ADR Class: Technical Name: UN No: Flash Point: Item: 15 REGULATORY INFORMATION: R phrases 36: Irritating to the eyes. S phrases 26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Other Data: Contains calcium chloride. 16 OTHER INFORMATION: -

4 ANGLO BUILDING PRODUCTS LTD BRANKSOME HOUSE, FILMER GROVE, GODALMING, SURREY GU7 3AB TEL: FAX: MATERIAL SAFETY DATA SHEET PAGE: 1/ 3 REVISION (3): 11/01/05 1 PRODUCT NAME: Speed Patch - Aggregate 2 CHEMICAL COMPOSITION: - Hazardous Components Blend of silica sands and selected cements CAS No. Wt% Symbol R Phrases Silica Sand >50% - - Cement (low CrVI) <50% Xi 36/37/38, 41 3 HAZARDS IDENTIFICATION: Contact with wet or dry product may cause irritation or dermatitis. Airborne dust from product is irritating to eyes and respiratory system. 4 FIRST AID MEASURES: 4.1 General Advice: Product is alkaline. Wash thoroughly with water. 4.2 Inhalation: Remove to fresh air. 4.3 Eye Contact: Wash with copious amounts of water. 4.4 Skin Contact: Wash with soap and water. 4.5 Ingestion: Do not induce vomiting. Wash mouth with water and give plenty of water to drink. 5 FIRE PRECAUTIONS: N/A 6 SPILLAGE: 5.1 Extinguishing Media: Extinguishing Media NOT to be used: Product Combustion Hazards: Special Protective Equipment for Firefighters: Personal Precautions: Dampen with water prior to sweeping up. 6.2 Environmental Precautions: Removal of Spillage: Place in closed container. 6.4 Further Advice: -

5 PRODUCT: SPEED PATCH - AGGREGATE PAGE: 2/ 3 REVISION (3): 11/01/05 7 HANDLING & STORAGE: 7.1 Safe Handling: Safe Storage: Store in dry conditions, in original containers with secure lids. 8 PERSONAL PROTECTION: 8.1 Respiratory Protection: Dust mask if risk of airborne dust. 8.2 Hand Protection: PVC or rubber gloves. Seek advice from glove suppliers and follow their instructions. 8.3 Eye Protection: Eye / face shield or safety spectacles. 8.4 Skin Protection: Industrial clothing. 9 PHYSICAL & CHEMICAL PROPERTIES: 9.1 Appearance: Powder / granular. 9.2 Odour: Colour: Grey 9.4 Boiling Point/Range: - Flash Point: - Auto Ignition Temp: - Oxidising Properties: - Relative Density: >2.0 g / c.c. Melting Point/Range: - Flammability(solid, gas): - Explosive Limits: - Vapour Pressure: - Water Solubility: - Other Data: - Solvent Content: - 10 STABILITY & REACTIVITY: 10.1 Conditions to avoid: None 10.2 Materials to avoid: Acids 10.3 Hazardous Decomposition Products: - 11 TOXICOLOGICAL INFORMATION: 11.1 Toxicity: LD50 Oral: } LD50 Skin: } Skin Irritation: } No data Sensitisation: } Inhalation: } Recommended Exposure Limit: 8hr TWA: total inahalable dust 10mg/m 3 8hr TWA respirable dust 4mg/m 3 12 ECOLOGICAL INFORMATION: Addition to water will cause ph to rise.

6 PRODUCT: SPEED PATCH - AGGREGATE PAGE: 3/ 3 REVISION (3): 11/01/05 13 SAFE DISPOSAL: When mixed with water and allowed to set, product is non-hazardous Product: Not classified as hazardous waste Container: Not hazardous waste. 14 TRANSPORT INFORMATION: Not classified as hazardous for transport 15 REGULATORY INFORMATION: IRRITANT Xi R phrases 41: Risk of serious damage to eyes. - : Contact with the wet product may cause irritation or dermatitis. - : Contact between the dry product and body fluids (e.g. sweat or eye fluid) may cause irritation or dermatitis. S phrases 2: Keep out of the reach of children. 36/37/39: Wear suitable protective clothing, gloves and eye/face protection. 26: In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. 28: After contact with skin, wash immediately with plenty of clean water. Other Data: - 16 OTHER INFORMATION: Contains less than 2ppm Cr VI by weight of cement.