Voluntary product information based on the format of a safety data sheet for coated abrasives

Transcription

1 page 1 of 6 Voluntary product information based on the format of a safety data sheet for coated abrasives 1. Identification of the product and of the company/undertaking 1.1 Product identifier Group 1 (Products which belong to this group are listed in the annex) 1.2 Use of the product Coated abrasives for the grinding/sanding of different kinds of materials. 1.3 Details of the supplier of the voluntary product information: Company: Hermes Schleifmittel GmbH Address: Luruper Hauptstraße 106 D Hamburg Phone: +49-(0) Fax: +49-(0) hsd@hermes-schleifmittel.com 1.4 Emergency telephone number: +49-(0) (Giftnotrufzentrale Nord) 2. Hazards identification 2.1. Classification Not applicable Abrasives are articles and not dangerous substances or mixtures according to Regulation (EC) N 1272/2008. See also section 8 and Label elements Abrasives are articles and not dangerous substances or mixtures and therefore no labelling is required according to Regulation (EC) N 1272/ Other hazards Not known.

2 page 2 of 6 3. Composition/information on ingredients The product contains the following ingredients which are classified according to Regulation (EC) Nr. 1272/2008 or for which a community occupational exposure limit value exists: Substance EC-N CAS-N REACH Registration N Conc. (%) Classification acc. to Regulation (EC) N 1272/2008 (CLP) Hazard classes/ hazard Hazard categories statements (For full text of H-phrases see section 16) 4. First aid measures See also section 8 and Description of first aid measures Inhalation: Eye contact: Skin contact: Ingestion: Note to physician: Not possible, due to the form of the product Not possible, due to the form of the product No harmful effects known Not likely, due to the form of the product; if necessary contact physician Not available Most important symptoms and effects, both acute and delayed Not known Indication of any immediate medical attention and special treatment needed Not relevant. Treat symptomatically. 5. Fire fighting measures 5.1. Extinguishing media Extinguishing media: water, foam, sand, powder or C0 2 as appropriate for surrounding materials

3 page 3 of Special hazards arising from the product Toxic fumes may occur. Use respiratory protective equipment Advice for fire fighters Extinguishing materials should be selected according to the surrounding area. 6. Accidental release measures Not applicable. 7. Handling and storage Follow instructions of grinding machine manufacturers and the relevant national regulations. In addition, observe the safety recommendations of the manufacturer. 8. Exposure controls/personal protection 8.1. Control parameters Before grinding it is recommended to perform a risk assessment and to use personal protection equipment accordingly. Occupational exposure limit values and/or biological limit values Keep exposure to the following components under surveillance. (Observe also the regional official regulations) Limit value type (country of origin) substance EC-N CAS-N ASGW (de) dust 1,25 Occupational limit value Long term Short term mg/m³ ml/m³ (ppm) mg/m³ ml/m³ (ppm) Peak limit ASGW (de) dust 10 2 (II) source, remark TRGS 900 (D) A alveolar dust TRGS 900 (D) E inhalable dust Note: Hazardous dust of the workpiece material may be generated during grinding and/or sanding operations. National regulations for dust exposure limit values have to be taken into consideration Exposure controls Individual protection measures Respiratory protection: Use respiratory protective equipment Hand protection: Wear protective gloves

4 page 4 of Eye protection: Wear protective goggles or face shield Hearing protection: Use hearing protection Body protection: Use protective clothing 9. Physical and chemical properties 9.1. Information on basic physical and chemical properties a) Physical state: solid b) Colour: as annexed c) Solubility in water: as annexed 9.2. Other information None. 10. Stability and reactivity Reactivity Coated Abrasives are stable when handled or stored correctly Chemical stability No decomposition in normal use Possibility of hazardous reactions No dangerous reactions known Conditions to avoid Coated Abrasives are stable when handled or stored correctly Incompatible materials No dangerous reactions known Hazardous decomposition products At temperatures exceeding 250 C hazardous or toxic decomposition products may be generated. 11. Toxicological information Information on toxicological effects No toxicological effects if inhaled or swallowed or with eye or skin contact are known. See also section 8.

5 page 5 of Ecological information Toxicity No effects known Persistence and degradability No biodegradable potentials known Bioaccumulative potential No potentials known Mobility in soil No potentials known Results of PBT and vpvb assessment Not relevant Other adverse effects No effects known. 13. Disposal considerations Waste treatment methods Product Follow national and regional regulations. Due to the ingredients and properties disposal as non-hazardous waste (2000/532/EC) is possible if no hazardous materials are added to the abrasives. (EWC Nr ), Due to the ingredients and properties disposal as hazardous waste (2000/532/EC) (EWC Nr ) Packing Follow national and regional regulations. 14. Transport information The product is not covered by international regulation on the transport of dangerous goods. 15. Regulatory information Safety, health and environmental regulations/legislation specific for the product No specific labelling requirements under respective EC directives Chemical safety assessment Not relevant.

6 page 6 of Other information Changes to the previous versions See sections 1 to 16. Literature and data sources REACH Regulation (EC) Nr. 1907/2006 Regulation (EC) N 1272/2008 Directive 98/24/EC Directive 2000/39/EC Directive 75/324/EEC Decision 2000/532/EC Transport regulations according to ADR, RID und IATA. Hazard statements referred to in section 2 and 3 According to Regulation (EC) N 1272/2008: None The above information is based on our current standard of knowledge and does not constitute any warranty of conditions of the product. The information does not form part of any contractual agreement. It remains the user s responsibility to adhere existing laws and regulations. Issued by: Contact: Research and Development ehs@hermes-schleifmittel.com +49 (0) open Mo - Fr (CET)

7 Annex to group 1 Last update: Code Type Grit range Colours Solubility BWF P: 180,280 orange partly BW 110 P: 24,36-320,400 reddish brown BW 110 SK P: 40, reddish brown BW/RB P: 24,36-180, ,400 red partly BW 114 P: black BW 114 VEL P: 40, black BW 115 P: ,400 reddish brown BW 115 VEL P: 40, 60, 80, ,240 reddish brown CB 115 +: black BS 118 P: 16,24, black BS 118 SK P: 40,60,80,120,220,320,400,600 black BS 118 VEL P: 16,24,36-220,320,400, black BS 119 P: black BS 119-Longlife P: light-grey BS 120 P: 240,320, 400, 500 anthracite VC 151-Longlife P: , 320,400,500 white VC 151-Longlife, SK P: , 320,400,500 red/ white VC 151-Longlife, VEL P: , red/ white VC 151-Longlife, VEL Multihole P: , red/ white VC 151- Longlife, VEL P: 150 red/ white VC 151- Longlife +, VEL P: ,220,240 white VC 152 P: 40,60-320,400 light-brown VC P: 40, light-brown VC 152 SK P: 40, light-brown VC 152 VEL P: 40,60-320,400 light-brown VC 153 VEL P: 24, reddish brown VC 154 Longlife P: light-brown VC 154 Longlife, SK P: , ,600,800,120 light-brown VC 154 Longlife, VEL P: light-brown VC 154 Longlife, Foam P: 150,180, , light-brown VC 154 Longlife, VEL Multihole P: light-brown VC 154 Longlife +, VEL P: 320,500 light-brown VC 158 VEL P 40, ,180,220,320,400, black SF 168 P: ,400,500 light-grey SF 168 SK P: 80,120, ,320,400,500 light-grey SF 168 VEL P: 80, 120, 150 light-grey ProBoard BS 179 P: black RB 304 J-flex P: black RB 308 J-flex P: 320,400,600 black RB 315 YX P: 24, black RB 315 YX SK P: 24,36,80 black RB 315 YX VEL P: 24, black RB X op +: 36, black RB Z op +: black RB 317 LX P: 60,80 reddish brown RB 317 J-flex-w P: reddish brown partly RB 320 X P: 16,24,36-320,400 red RB X P: red RB 374 Z +: black RB ZZ P: 24, black ProBoard RB ZZ P: 24, black RB 375 Y P: ,320 black RB Z P: , 220 black ProBoard SB ZZ P: 24, black Kork RB 515 YX P: 800 black Kork RB 515 X P: 150,220,280,320,400, black Kork RB 515 Y P: 120,150,220,320,400, black Kork RB 525 X P: 220,280,400,600 reddish brown Hermesit RB 535 X P: ,400,600 reddish brown Hermesit RB 535 X P: ,400,600 reddish brown Hermesit RB 535 Y P: ,240,320, reddish brown page 1

8 Annex to group 1 Last update: Code Type Grit range Colours Solubility Hermesit BS 540 P: 150,220,320 black Hermesit RB 540 X P: ,320,400 black Hermesit RB 545 X P: ,280,320,400,600,800 black Hermesit RB 545 X P: ,400,600,800 black Hermesit RB 545 Y P: 40,60-120,180,280 black Kork RB 555 X --- yellow Kork RB X --- black partly GL black partly GL black Mercurit RB 590 Y P: 80,120,180,240,320,400,600 reddish brown Mercurit RB 595 Y P: 80,120,180,240 black Mercurit RB 598 Y P: 240,320,400, reddish brown WS-flex 16 P/+: ,3000,5000 anthracite WS flex 16 SK P/+: 1500,2500 anthracite WS flex 16 VEL P/+: 400,600,800,2000,2500,3000, anthracite WS flex 16 SK 302 P/+: ,3000,5000 anthracite WS flex 16 VEL Multihole P: 400,600,800,2000 anthracite WS flex 18 C P: anthracite WS flex 18 C P/+: , anthracite WS flex 18 C SK 12 P: anthracite WS flex 18 C film P: 60,80,120, , ,2500 anthracite WS flex 18 C SK P: 60,80, ,400- anthracite 1500, WS flex 18 C SK 302 P: 180,240,320,600,800 anthracite WS flex 18 C micro +: 3000,4000 anthracite WS flex 18 C micro film +: 3000,4000 anthracite WS flex 18 C micro SK +: 3000,4000 anthracite WA flex 28 B P: light-brown WA flex 28 B P: 800 light-brown FB 636 P:120,240,320,600,800,1200,2500 light-blue FB 637 light-blue P: 120,180,240,280, FB 637 SK P: 360, ,1200,2500 light-blue FB SK P: 240 light-blue webrax-mag +: webrax-an : 80,100,180, brown webrax-an 702 +: ,180,280, webrax-an : brown webrax-an : 80 grey webrax-msg +: 80,150,180,220,280, 400, 500 grey webrax MS 705 +: 80,220,280 grey webrax-msg SK +: 400 grey webrax-msg XX +: white webrax-gp 706 weiss --- brown webrax-gp 706 oliv --- oliv webrax-multiclean --- black webrax-an 707 +: 100, webrax-an : 100,180, webrax-an : 120 brown webrax-oa 708 +: 120,180,280,360 brown webrax-oa 708 VEL +: 180,280,360 brown webrax-os 709 +: 180,280,500, grey webrax-os 709 VEL +: 1500 grey webrax-oa 710 +: , brown webrax-oa 710 VEL +: 100 brown webrax-oa : 80,180 brown page 2

9 Annex to group 1 Last update: Code Type Grit range Colours Solubility webrax-oa 713 +: 100, light-brown webrax-oa 713 VEL +: 180 light-brown webrax-os 715 +: 100,120,180,280, 500,800 black webrax-os 716 +: 180,280,800 black webrax-oa 710/RB 320 X Kombi webrax-oa 710/RB 377 YX Kombi webrax-os 715/RB 315 X Kombi webrax-pn yellow Foam pad, 5 mm --- dark grey Sanding sponge four sided F: 36, dark grey Sanding sponge, blue, single sided P: ,180,220,280 blue Sanding sponge, white, double sided F: 100,180,220 white Sanding sponge, white, four sided F: 100 white Sanding sponge, FSSA 427 four sided, super soft F: 60, Sanding Sponge FMA 105 velour backed P: 60,100,180,220,280,400,600 grey Sanding Sponge Pad single sided P: ,280,400,600 dark grey Sanding sponge FSSS 105, single sided, F: 100,180,220 super soft Sanding sponge, FHA 427, four sided, F: 60,100 hard Sanding sponge, three sided F:100 Sanding sponge, Medium, single sided P:400 velour backed Sanding sponge, Premium, double sided F:36,40,60-220, Finenet FN 915 VEL +: 240,360, grey GA : GA VEL +: 400, Microlite Defect Highlighter Stick SCG +: 120 grey P: FEPA #: ANSI +: others page 3