STANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics.

Size: px
Start display at page:

Download "STANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics."

Transcription

1 STANDARD PRODUCT RANGE FRIAIT -DEGUSSIT High Performance Ceramics

2 CONTACT Global Sales Phone: Fax: Phone: Fax: Phone: Fax: Phone: Fax: MATERIAS Material FRIATEC-Brand Characterisation Al 2 O 3 Aluminium Oxide Al 2 O 3 Aluminium Oxide Al 2 O 3 Aluminium Oxide Al 2 O 3 Aluminium Oxide Al 2 O 3 Aluminium Oxide Al 2 O 3 (+ ZrO 2 ) Aluminium Oxide, fine grain stabilized ZrO 2 Zirkonium Oxide ZrO 2 Zirkonium Oxide DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT DD57 FRIAIT FZT FRIAIT FZM DEGUSSIT FZY Pure Al 2 O 3, dense, excellent thermal and electrical resistance properties, corrosion resistant, permeable to microwaves Pure Al 2 O 3, slightly porous, good resistance to thermal shock, extremely good creep strength Pure Al 2 O 3, very porous, good thermal insulation, highest resistance to thermal shock of all the Al 2 O 3 materials Pure Al 2 O 3, dense, without any binder, red colour, wear resistant and tough, also called sintered ruby Pure Al 2 O 3, dense, extremely resistant to wear and corrosion, very high electrical insulating properties A 2 O 3 toughened with ZrO 2, dense, high strength, good resistance to thermal shock, extremely resistant to wear and corrosion, fine grain size ZrO 2 partially stabilized with MgO, dense, high strength and highly wear resistant, extremely resistant to corrosion and thermal shock Partially stabilized with Y 2 O 3, dense, high purity ZrO 2, high temperature and corrosion resistance, ion conducting for measuring oxygen Available are also parts in different ceramic materials. 02 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

3 TOERANCES IN HIGH-TEMPERATURE TECHNOOGY The dimensional accuracy of the size of the sintered parts essentially depends on the material and the forming method. Tubes, multi-bore tubes and rods ø 3 mm as well as bands: Diameter ± 5 % (but not less than ± 0,1 mm); Cut length tolerance: ± 1 %, < 100 mm upon request; Straightness: maximum crescent height 0.5% of total length Tubes, multi-bore tubes and rods ø < 3 mm: Diameter ± 5 % (but not less than ± 0,05 mm); Cut length tolerance: ± 1 %, < 100 mm upon request; Straightness: maximum crescent height: 0.5% of total length Crucibles, boats, combustion trays: Tolerances ± 3 % (but not less ± 0,1 mm) Plates: Tolerances ± 3 % (but not less ± 0,1 mm); Deflection: maximum 0,5 % of the diagonal Insulating beads and grinding bodies: Tolerances ± 3 % (but not less than ± 0,1 mm) All dimensions in mm TABE OF CONTENTS Electrical Engineering High Temperature Technology Surface Finishing Feedthroughs Tube-To-Tube Insulator Standoffs Tubes 18 Multi-bore tubes 19 Insulating beads 20 Protective tubes/ Multi-bore tubes for thermocouples 21 Rods, Bars, Bands Crucibles 25 Boats, Combustion trays Plates 28 Grinding bodies 28 Insulating powders, Cement Fine grinding tools 37 Burnishing wheels FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 03

4 Available are also parts with different dimensions, in different ceramic and metal materials as well as coated parts.

5 EECTRICA ENGINEERING Keramik-Metall-Verbindungen EECTRICA ENGINEERING Feedthroughs, Tube-To-Tube Insulator, Standoffs

6 SINGE TERMINA FEEDTHROUGHS Voltage (DC) Ø M Ø D Ø F Ø J G K 1 Product No. ØM 4 kv M4 1, kv M6 2, kv M6 2,5 10, kv M8 3,8 13,5 6, Feedthroughs are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) Fe (Ni42) (Ni42) 13 G 1 K ØJ ØF SINGE TERMINA FEEDTHROUGHS Voltage (DC) Conductor Current Ø D Ø F G K 1 2 Product No (Ni42) (Ni42) 2 G 1 K 2 kv NiFeCo 4 A 1,5x0, kv NiFeCo 5 A 1, kv NiFeCo 5 A 1, kv Cu 15 A 1, kv Ni42 5 A 1, kv Cu 15 A 1, kv Ni42 8 A kv Cu 25 A kv NiFeCo 5 A 1, kv Cu 15 A 1, kv Ni42 12 A kv Cu 40 A kv Ni42 20 A 4 10, kv Cu 60 A 4 10, kv Ni42 25 A 5 13, kv Cu 80 A 5 13, kv Cu 120 A 8 19, Feedthroughs are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØF 06 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

7 SINGE TERMINA FEEDTHROUGHS Voltage (DC) Conductor Current Ø D Ø F G Ø K 1 2 Product No. 1 kv Ni42 4 A 1,5x0,25 4 2,8 35 4, kv Ni42 5 A 1,5 4 2,8 35 4, kv Cu 5 A 1,5 4 2,8 35 4, kv Ni42 30 A 7,5x0, kv Cu 90 A 7,5x0, Feedthroughs are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØK (Ni42) G (Ni42) 2 ØF SINGE TERMINA FEEDTHROUGHS Voltage (DC) No. of Flutes eakage Path Ø M Ø D Ø F Ø A Ø A1 G K K1 2 Product No. 25 kv 3 54 M6 2, This feedthrough could be adjusted with different conductors for special electrical standards Also available with welded-on flanges (CF, KF, etc.) ØA ØM Fe (Ni42) 10,4 G K (Ni42) K1 Ø13 ØA1 ØF FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 07

8 SINGE TERMINA FEEDTHROUGHS Voltage (DC) No. of Flutes eakage Path Ø M Ø D Ø F Ø A Ø A1 G K1 2 Product No. Fe (Ni42) ØA M kv M8 3,8 88, , Order-related manufacture This feedthrough could be adjusted with different conductors for special electrical standards Also available with welded-on flanges (CF, KF, etc.) G (Ni42) 6.4 K1 Ø36 ØA1 ØF MUTITERMINA FEEDTHROUGHS Voltage (DC) Current Ø D Ø A Ø G Ø J 1 2 No. of Feedthroughs Product No. ØG 500 V Pin-Pin 4 A 1,5x0, ,2 15, kv Pin-Flange Order-related manufacture Feedthrough are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØM (Ni42) (Ni42) 2 1 ØJ 5x72 ØA FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

9 MUTITERMINA FEEDTHROUGHS Voltage (DC) Current Ø D Ø F Ø J G 1 2 No. of Feedthroughs Product No. 500 V Pin-Pin 1 kv Pin-Flange 4 A 1,5x0, , V Pin-Pin 1 kv Pin-Flange 4 A 1,5x0, , Feedthroughs are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØF (Ni42) (Ni42) 2 G ØJ TUBE-TO-TUBE INSUATORS Voltage (DC) Ø F Ø A Ø J G Product No. 5 kv 8x6 13, Tube-To-Tube Insulator is also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØF (NiCo2918) G (Ni42) (NiCo2918) 8 ØJ ØA TUBE-TO-TUBE INSUATORS Voltage (DC) Ø F Ø A Ø J G Product No. 15 kv Tube-To-Tube Insulator is also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØA ØF (CrNiFe) (Ni42) 15 G 15 ØJ FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 09

10 TUBE-TO-TUBE INSUATORS Voltage (DC) No. of Flutes eakage Path Ø F Ø A Ø J G Product No. 15 kv Tube-To-Tube Insulator is also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) STANDOFFS Voltage (DC) eakage Path Ø D 1 Product No. 15 kv Standoff is also available in other dimensions Ø14 M (Ni42) (Ni42) 10 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

11 STANDOFFS Voltage (DC) eakage Path Ø D 1 Product No. 40 kv Customized parts with different lengths, different diameters or different number of flutes are also available Ø14 M (Ni42) (Ni42) 1 STANDOFFS Voltage (DC) eakage Path Ø D 1 Product No. 10 kv 25 7, kv 38 9, Standoffs are also available in other dimensions (Cu) (Cu) 1 M3 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 11

12 Available are also parts with different dimensions and in different ceramic materials.

13 HIGH TEMPERATURE TECHNOOGY Rohre, Stäbe, Kapillaren, Tiegel, Platten, Schiffchen, Glühkästen, Mahlkörper HIGH TEMPERATURE TECHNOOGY Tubes, Rods, Multi-Bore Tubes, Bands, Crucibles, Discs, Plates, Boats, Combustion Trays, Grinding Pieces, Insulating powders, Cement

14 TUBES DEGUSSIT A24 Ød Ø D Ø d max. Product No. 3 1, * * * * * * Ø D Ø d max. Product No. DEGUSSIT A * normative size for thermocouple ARGE-DIAMETER TUBES Ø D Ø d max. Product No Ød Order-related manufacture 14 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

15 TUBES - ONE END COSED Ø D Ø d max. Product No. 3 1, * * * * * * * * DEGUSSIT A24 Ød Ø D Ø d max. Product No. DEGUSSIT A * standard size for thermocouple Available with flange (Surcharge: +10% of Price per Metre) FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 15

16 THIN INSUATING TUBES Ø D Ø d max. Product No. 0,5 0, ,6 0, ,8 0, Ød 1 0, , ,1 0, ,2 0, , ,6 0, ,7 1, , , ,5 1, ,7 1, TUBES - THIN WAED Ø D Ø d max. Product No Ød FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

17 TUBES FOR OXYGEN SENSORS Ø D Ø d max. Product No. DEGUSSIT FZY Order-Related Product Ød TUBES FOR OXYGEN SENSORS - ONE END COSED Ø D Ø d max. Product No. DEGUSSIT FZY Order-Related Product Ød RECTANGUAR TUBES B H Wall Thickness max. Product No , , Order-Related Product B H TUBES FOR HEATING COIS Ø D Ø d max. Thread breadth Thread depth Thread pitch Product No Ød FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 17

18 MUTI-BORE TUBES - ROUND on request with notch Ø D Ø d Number of bores max. Product No. 0,9 0, ,2 0, ,2 0, ,55 0, , , ,35 0, ,5 0, ,8 0, , , * 4 0, * 4 1, , ,5 1, * 6 1, * 8 0, , , * 8,5 1, * * normative size for thermocouple MUTI-BORE TUBES - OVA on request with notch B H Ø d Number of bores max. Product No ,9 0, ,4 0, ,5 0, ,2 1, FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

19 INSUATING BEADS Ø D Ø d Product No. 3, , , , , Packing unit: 100 pcs. Ød Ø D Ø d Number of bores Product No. INSUATING BEADS 4 0, , , , Packing unit: 100 pcs. FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 19

20 PROTECTIVE TUBES FOR STANDARD-ENGTH THERMOCOUPES ONE END COSED DEGUSSIT A24 Ød Ø D Ø d max. Product No Ø D Ø d max. Product No. DEGUSSIT A MUTI-BORE TUBES FOR STANDARD-ENGTH THERMOCOUPES Ø D Ø d Number of bores max. Product No. 4 0, , , , ,5 1, ,5 1, THERMOCOUPES DEGUSSIT A24 Protective tubes and bore tubes ength outer protective tube 1 ength inner protective tube 2 ength bore tube For a standard thermocouple with an outer protective tube 180 you need an inner protective tube 200 and bore tube FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

21 RODS Ø D max. Product No. 0, , , , , Ø D max. Product No. BARS Tolerances Diameter: +1 / +4 mm ength: +/- 5 mm Deflection: max. 0,5 % of the total lenght Order-Related Product B H max. Product No. BANDS Order-Related Product B H FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 21

22 CRUCIBES - CYINDRICA, FAT BASE DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT FZY 1 2 Ø D1 Ø D2 H Approx. Vol. ml Product No , H Ø D1 Ø D2 H Approx. Vol. ml Product No. DEGUSSIT A Ø D1 Ø D2 H Approx. Vol. ml Product No. DEGUSSIT A , , Ø D1 Ø D2 H Approx. Vol. ml Product No. DEGUSSIT FZY Order-Related Product 22 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

23 CRUCIBES CONICA HIGH FORM Ø D1 Ø D2 Ø D3 H Approx. Vol. ml Product No DEGUSSIT FZY Ø D1 Ø D2 Ø D3 H Approx. Vol. ml Product No. DEGUSSIT FZY Order-Related Product 3 H CRUCIBES CONICA WIDE FORM Ø D1 Ø D2 Ø D3 H Approx. Vol. ml Product No H 3 CRUCIBES - CYINDRICA, ROUND BASE Ø D1 Ø D2 H Approx. Vol. ml Tammann No. Product No I a I b I c II a II b II c III a III b III c ,070 IV a Tammann H FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 23

24 SIP-ON CRUCIBES Approx. Vol. ml Product No Order-Related Product Ø5 Ø4 0, Ø2 Ø4 SIP-ON CRUCIBES Approx. Vol. ml Product No Order-Related Product Ø 17 Ø 16 R 8 R Ø 2,5 Ø 3,6 SIP-ON CRUCIBES Approx. Vol. ml Product No Order-Related Product Ø8 Ø6 ( 15 ) 0,6 6 8,4 8 6 Ø2,55 Ø4,3 24 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

25 BOATS B H W Approx. Vol. ml Product No , , , B W H COMBUSTION TRAYS B H W Approx. Vol. ml Product No B H W Approx. Vol. ml Product No. DEGUSSIT A B DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT FZY H B H W Approx. Vol. ml Product No. DEGUSSIT A * W B H W Approx. Vol. ml Product No. DEGUSSIT FZY Order-Related Product * W conical FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 25

26 PATES - ROUND DEGUSSIT A25 Ø D H Product No PATES ROUND WITH HOE Ø D H Product No. DEGUSSIT A Plates sizes of plates up to approx. Ø 350 x 20 upon request Ø D1 Ø D2 H Product No Plates sizes of plates up to approx. Ø 350 x 20 upon request 26 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

27 PATES - RECTANGUAR B H Product No DEGUSSIT A25 FRIAIT FZM H B H Product No. DEGUSSIT A B B H Product No B H Product No. FRIAIT FZM Plates sizes of plates up to approx. 700 x 350 x 20 upon request FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 27

28 GRINDING BODIES Ø D H pcs./l pcs./kg kg/l Product No , , , , , INSUATING POWDER - CACINED Aluminium oxide Al 2 O 3 >99,5 % Type Crystal size Product No. VM 99% < 10 µm Primarily for electrical insulation of cathode heaters and as fillers of casting resins. INSUATING POWDER - FUSED Aluminium oxide Al 2 O 3 >99,7% Type Crystal size Product No. E No. 100 ~ 150 µm E No. 250 ~ 40 µm Primarily in dry filling for thermal insulation of electrical furnaces. CEMENT Aluminium oxide A 2 O 3 >95% Type Crystal size Product No. A2O3 ~ 150 µm For sealing thermocouples in furnace linings, embedding heating coils or platinum crucibles, etc. The cement is diluted with water to the required consistency. Since it is not cold-hardening, it contains 0.5% organic binder in order to increase its dry strength. This binder is burned off completely during the heating process. Above 1200 C progressive hardening of the cement begins, as a result of sintering. 28 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

29 Ø D Product No. PRECISION BAS Quality: Grade 25, polished surface Sphericity: 0,6 µm Diameter Tolerance: 2,5 µm 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 29

30 Available are also parts with different dimensions and in different ceramic materials.

31 SURFACE FINISHING Feinschleifwerkzeuge SURFACE FINISHING Fine Grinding Tools, Burnishing Wheels

32 FINE-GRINDING TOO - BENCHSTONE DEGUSSIT DD57 DEGUSSIT A24 Dimensions Colour Type Product No. DEGUSSIT DD x 25 x 10 ruby red fine x 25 x 10 ruby red medium x 25 x 15 ruby red fine x 25 x 15 ruby red medium x 50 x 12 ruby red fine x 50 x 12 ruby red medium Dimensions Colour Type Product No. DEGUSSIT A x 25 x 10 white coarse x 25 x 15 white coarse FINE-GRINDING TOO - BENCHSTONE IN WOODEN CASE, REMOVABE DEGUSSIT DD57 Dimensions Colour Type Product No. 120 x 50 x 10 ruby red fine / medium FINE-GRINDING TOO - BENCHSTONE IN WOODEN CASE, GUED IN DEGUSSIT DD57 DEGUSSIT A24 Dimensions Colour Type Product No. DEGUSSIT DD x 25 x 10 ruby red fine x 25 x 10 ruby red medium x 50 x 10 ruby red fine x 50 x 10 ruby red medium x 50 x 12 ruby red fine x 50 x 12 ruby red medium FINE-GRINDING TOO - TRIANGUAR Dimensions Colour Type Product No. DEGUSSIT A x 25 x 10 white coarse DEGUSSIT DD57 Dimensions Colour Type Product No. 100 x 4 ruby red fine x 4 ruby red medium x 6 ruby red fine x 6 ruby red medium x 6 ruby red coarse x 8 ruby red fine x 8 ruby red medium x 8 ruby red coarse x 10 ruby red fine x 10 ruby red medium x 10 ruby red coarse x 13 ruby red fine x 13 ruby red medium x 13 ruby red coarse FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

33 FINE-GRINDING TOO - RECTANGUAR Dimensions Colour Type Product No. DEGUSSIT DD x 6 x 3 ruby red fine x 6 x 3 ruby red medium x 8 x 6 ruby red fine x 8 x 6 ruby red medium x 8 x 6 ruby red coarse FINE-GRINDING TOO - SQUARE Dimensions Colour Type Product No. DEGUSSIT DD x 4 ruby red fine x 4 ruby red medium x 6 ruby red fine x 6 ruby red medium x 6 ruby red coarse x 8 ruby red fine x 8 ruby red medium x 8 ruby red coarse x 10 ruby red fine x 10 ruby red medium x 10 ruby red coarse x 13 ruby red fine x 13 ruby red medium x 13 ruby red coarse FINE-GRINDING TOO - SEMI-CIRCUAR Dimensions Colour Type Product No. DEGUSSIT DD x 10 ruby red medium x 10 ruby red coarse FINE-GRINDING TOO - CIRCUAR Dimensions Colour Type Product No. DEGUSSIT DD x 4 ruby red fine x 4 ruby red medium x 6 ruby red fine x 6 ruby red medium x 6 ruby red coarse x 8 ruby red fine x 8 ruby red medium x 8 ruby red coarse x 10 ruby red fine x 10 ruby red medium x 10 ruby red coarse FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 33

34 ASSORTMENT OF FIES DEGUSSIT DD57 Dimensions Colour Type Product No. ASSORTMENT OF FIES - MIDGET FIES Assortment x 10 ruby red medium x 10 ruby red medium x 8 x 6 ruby red coarse x 6 ruby red medium x 10 ruby red coarse The assortment of files, Product No , contains one of each file listed above. The Files are also available separately DEGUSSIT DD57 Dimensions Colour Type PU pcs. Product No. Assortment x 2 ruby red fine x 3 ruby red fine x 1 ruby red fine x 2 ruby red fine x 3 x 0,3 ruby red fine x 1 ruby red fine x 2 ruby red fine x 3 ruby red fine x 4 ruby red fine x 5 x 1,5 ruby red fine x 4 x 1,5 ruby red fine The assortment of midget files, Product No , contains 1 holder and 2 collets as well as one of each midget file listed above. PU= packing unit The files are also available separately 34 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

35 FINE-GRINDING TOO - BADE Dimensions Colour Type Product No. DEGUSSIT DD x 15 x 3/0,5 ruby red fine x 15 x 3/0,5 ruby red medium FINE-GRINDING TOO - TAPERED Dimensions Colour Type Product No. DEGUSSIT DD x 30 x 7/2 ruby red medium FINE-GRINDING TOO - RHOMBOID Dimensions Colour Type Product No. DEGUSSIT DD x 13 x 5 ruby red coarse FINE-GRINDING TOO - CONICA Dimensions Colour Type Product No. DEGUSSIT DD x 5 x 2 ruby red fine x 5 x 2 ruby red coarse FINE-GRINDING TOO - PENCI Dimensions Colour Type Product No. DEGUSSIT DD x 5 ruby red fine FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 35

36 FINE-GRINDING TOO - MOUNTED POINT, CYINDRICA DEGUSSIT DD57 Ø D1 Ø D2 H Type Product No fine fine fine fine fine fine fine fine fine fine fine medium medium medium medium medium medium medium medium medium medium medium Order-Related Product FINE-GRINDING TOO - MOUNTED POINT, CYINDRICA-CONICA DEGUSSIT DD57 point angle 60 Ø D1 Ø D2 H Type Product No fine fine fine fine fine fine medium medium medium medium medium medium ength of the shaft 30 upto 35 mm Ø D1: Ceramics Ø D2: Metal Shaft H: Ceramics Order-Related Product 36 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

37 FINE-GRINDING WHEES Ø D1 Ø D2 B Design Product No. DEGUSSIT DD57 fine with metal bushing with metal bushing with metal bushing with metal bushing with metal bushing with metal bushing with metal bushing without metal bushing without metal bushing without metal bushing without metal bushing without metal bushing without metal bushing without metal bushing Order-Related Product Profile 2 and 3 upon request 1 2 B BURNISHING WHEES Ø D1 Ø D2 Ø D3 a Product No Order-Related Product DEGUSSIT DD57 fine a 12 BURNISHING WHEES Ø D1 Ø D2 Ø D3 a Product No. DEGUSSIT DD57 fine Order-Related Product a FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 37

38 COMPETENCE PUS RESPONSIBIITY Our customers rightly expect first-class performance with lasting value. Besides the competence to achieve this, we also undertake the responsibility for it. Ask for the evidence: FRIATEC is the technological and market leader in ceramic materials for the 21st Century Image-intensifier for radiology 02 X-Ray tube for radiology 03 Pressure sensor for aerospace 04 Camera housing for aerospace 05 Accelerator tube for radiologye 06 Feedthroughs for high-vacuum applications 07 High-voltage feedthroughs for vacuum technology 08 Insulating tubes for high-vacuum technology 09 High current feedthroughs for energy systems 10 Wafer carrier for the semiconductor industry 11 Test plates for the semiconductor industry 12 Sensor elements for the semiconductor industry 13 Guide strip for the printing industry 14 Isolator for the printing industry 15 Square tubes for the printing industry 16 Tubes, rods and capillaries for high temperature applications 17 Thermal protection tubes for the glass and metallurgical industries 18 Crucibles and boats for industry and research 19 FZY-probes for oxygen measurement in gases 20 Dielectric elements for fuel cells 21 Dielectric elements for fuel cells 22 Thermal protection tubes for high temperature applications 23 Shaping roller for the glass industry 24 Glow-block for heat treatment of lamp filaments 38 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

39 Electrical Engineering High Temperature Technology Mechanical Engineering Surface Finishing Ozone generator for the semiconductor industry 26 Control discs for production and laboratory processes 27 Dosing pistons with control edge for the food-processing and pharmaceutical industries 28 Pump inserts for medical technology 29 Float body for flow-measurement in the chemical industry 30 Electrode holder for flow-measurement in the chemical industry 31 Flow meters for the food-processing industry 32 Welding pins for automotive-body manufacture 33 Centring pin for automotive-body manufacture 34 Metal-forming tools for automotive-body manufacture 35 Isolation shells for magnetically-coupled pump in the chemical industry 36 Pump impeller for the chemical industry 37 Stirrers for the chemical industry 38 High-pressure pump piston for the chemical industry 39 Adhesive nozzle for the paper industry 40 Valve disc for pulp-processing 41 Vacuum plate for paper-making 42 Protection tubes for the glass industry 43 Midget file for the glass-processing industry 44 Hand lappers for the glass-processing industry 45 Grinding wheel for the glass-processing industry 46 Grinding tools for metal working 47 Bench-stones for metal working 48 Mounted points for metal working FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 39

40 FRIATEC Aktiengesellschaft - Ceramics Division Steinzeugstrasse Mannheim (Germany) Tel info-frialit@friatec.de e 0,3.III15.tp