STANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics.

Transcription

1 STANDARD PRODUCT RANGE FRIAIT -DEGUSSIT High Performance Ceramics

2 CONTACT Global Sales Phone: Fax: Phone: Fax: Phone: Fax: Phone: Fax: MATERIAS Material FRIATEC-Brand Characterisation Al 2 O 3 Aluminium Oxide Al 2 O 3 Aluminium Oxide Al 2 O 3 Aluminium Oxide Al 2 O 3 Aluminium Oxide Al 2 O 3 Aluminium Oxide Al 2 O 3 (+ ZrO 2 ) Aluminium Oxide, fine grain stabilized ZrO 2 Zirkonium Oxide ZrO 2 Zirkonium Oxide DEGUSSIT A24 DEGUSSIT A25 FRIAIT FZT FRIAIT FZM DEGUSSIT FZY Pure Al 2 O 3, dense, excellent thermal and electrical resistance properties, corrosion resistant, permeable to microwaves Pure Al 2 O 3, slightly porous, good resistance to thermal shock, extremely good creep strength Pure Al 2 O 3, very porous, good thermal insulation, highest resistance to thermal shock of all the Al 2 O 3 materials Pure Al 2 O 3, dense, without any binder, red colour, wear resistant and tough, also called sintered ruby Pure Al 2 O 3, dense, extremely resistant to wear and corrosion, very high electrical insulating properties A 2 O 3 toughened with ZrO 2, dense, high strength, good resistance to thermal shock, extremely resistant to wear and corrosion, fine grain size ZrO 2 partially stabilized with MgO, dense, high strength and highly wear resistant, extremely resistant to corrosion and thermal shock Partially stabilized with Y 2 O 3, dense, high purity ZrO 2, high temperature and corrosion resistance, ion conducting for measuring oxygen On request, we also supply parts with dimensions not listed as well as parts made of other ceramic materials 02 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

3 TOERANCES IN HIGH-TEMPERATURE TECHNOOGY The dimensional accuracy of the size of the sintered parts essentially depends on the material and the forming method. Tubes, multi-bore tubes and rods ø 3 mm as well as bands: Diameter ± 5 % (but not less than ± 0,1 mm); Cut length tolerance: ± 1 %, < 100 mm upon request; Straightness: maximum crescent height 0.5% of total length Tubes, multi-bore tubes and rods ø < 3 mm: Diameter ± 5 % (but not less than ± 0,05 mm); Cut length tolerance: ± 1 %, < 100 mm upon request; Straightness: maximum crescent height: 0.5% of total length Crucibles, boats, combustion trays: Tolerances ± 3 % (but not less ± 0,1 mm) Plates: Tolerances ± 3 % (but not less ± 0,1 mm); Deflection: maximum 0,5 % of the diagonal Insulating beads and grinding bodies: Tolerances ± 3 % (but not less than ± 0,1 mm) All dimensions in mm TABE OF CONTENTS Electrical Engineering High Temperature Technology Surface Finishing Feedthroughs Tube-To-Tube Insulator Standoffs Tubes 18 Multi-bore tubes 19 Insulating beads 20 Protective tubes/ Multi-bore tubes for thermocouples 21 Rods, Bars, Bands Crucibles 25 Boats, Combustion trays Plates 28 Grinding bodies 28 Insulating powders, Cement Fine grinding tools 37 Burnishing wheels FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 03

4

5 EECTRICA ENGINEERING Ceramic-Metal Assemblies EECTRICA ENGINEERING Feedthroughs, Tube-To-Tube Insulator, Standoffs

6 SINGE TERMINA FEEDTHROUGHS Voltage (DC) Ø M Ø D Ø F Ø J G K 1 Product No. Fe ØM 4 kv M4 1, kv M6 2, kv M6 2,5 10, kv M8 3,8 13,5 6, Feedthroughs are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) (Ni42) (Ni42) 13 G 1 K ØJ ØF SINGE TERMINA FEEDTHROUGHS Voltage (DC) Conductor Current Ø D Ø F G K 1 2 Product No (Ni42) (Ni42) 2 G 1 K 2 kv NiFeCo 4 A 1,5x0, kv NiFeCo 5 A 1, kv NiFeCo 5 A 1, kv Cu 15 A 1, kv Ni42 5 A 1, kv Cu 15 A 1, kv Ni42 8 A kv Cu 25 A kv NiFeCo 5 A 1, kv Cu 15 A 1, kv Ni42 12 A kv Cu 40 A kv Ni42 20 A 4 10, kv Cu 60 A 4 10, kv Ni42 25 A 5 13, kv Cu 80 A 5 13, kv Cu 120 A 8 19, Feedthroughs are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØF 06 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

7 SINGE TERMINA FEEDTHROUGHS Voltage (DC) Conductor Current Ø D Ø F G Ø K 1 2 Product No. 1 kv Ni42 4 A 1,5x0,25 4 2,8 4, kv Ni42 5 A 1,5 4 2,8 4, kv Cu 5 A 1,5 4 2,8 4, kv Ni42 30 A 7,5x0, kv Cu 90 A 7,5x0, Feedthroughs are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØK (Ni42) G (Ni42) 2 ØF SINGE TERMINA FEEDTHROUGHS Voltage (DC) No. of Flutes eakage Path Ø M Ø D Ø F Ø A Ø A1 G K K1 2 Product No. 25 kv 3 54 M6 2, This feedthrough could be adjusted with different conductors for special electrical standards Also available with welded-on flanges (CF, KF, etc.) ØA ØM Fe (Ni42) 10,4 G K (Ni42) K1 Ø13 ØA1 ØF FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 07

8 SINGE TERMINA FEEDTHROUGHS Voltage (DC) No. of Flutes eakage Path Ø M Ø D Ø F Ø A Ø A1 G K1 2 Product No. 50 kv M8 3,8 88, , This feedthrough could be adjusted with different conductors for special electrical standards Fe (Ni42) ØA M8 17 Also available with welded-on flanges (CF, KF, etc.) G (Ni42) K1 6.4 Ø36 ØA1 ØF MUTITERMINA FEEDTHROUGHS Voltage (DC) Current Ø D Ø A Ø G Ø J 1 2 No. of Feedthroughs Product No. 500 V Pin-Pin 4 A 1,5x0, ,2 15, kv Pin-Flange Feedthrough are also available in other dimensions ØG Also available with welded-on flanges (CF, KF, etc.) ØM (Ni42) (Ni42) 2 1 ØJ 5x72 ØA FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

9 MUTITERMINA FEEDTHROUGHS Voltage (DC) Current Ø D Ø F Ø J G 1 2 No. of Feedthroughs Product No. 500 V Pin-Pin 1 kv Pin-Flange 4 A 1,5x0, , V Pin-Pin 1 kv Pin-Flange 4 A 1,5x0, , Feedthroughs are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØF (Ni42) (Ni42) 2 G ØJ TUBE-TO-TUBE INSUATORS Voltage (DC) Ø F Ø A Ø J G Product No. 5 kv 8x6 13, Tube-To-Tube Insulator is also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØF (NiCo2918) G (Ni42) (NiCo2918) 8 ØJ ØA TUBE-TO-TUBE INSUATORS Voltage (DC) Ø F Ø A Ø J G Product No. 15 kv Tube-To-Tube Insulator is also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØA ØF (CrNiFe) (Ni42) 15 G 15 ØJ FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 09

10 TUBE-TO-TUBE INSUATORS Voltage (DC) No. of Flutes eakage Path Ø F Ø A Ø J G Product No. 15 kv Tube-To-Tube Insulator is also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) STANDOFFS Voltage (DC) eakage Path Ø D 1 Product No. 15 kv Standoff is also available in other dimensions Ø14 M (Ni42) (Ni42) 10 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

11 STANDOFFS Voltage (DC) eakage Path Ø D 1 Product No. 40 kv Customized parts with different lengths, different diameters or different number of flutes are also available Ø14 M (Ni42) (Ni42) 1 STANDOFFS Voltage (DC) eakage Path Ø D 1 Product No. 10 kv 25 7, kv 38 9, Standoffs are also available in other dimensions (Cu) (Cu) 1 M3 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 11

12

13 HIGH TEMPERATURE TECHNOOGY Tubes, Rods, Multi-Bore Tubes, Crucibles, Discs, Plates, Boats, Combustion Trays, Grinding Pieces HIGH TEMPERATURE TECHNOOGY Tubes, Rods, Multi-Bore Tubes, Bands, Crucibles, Discs, Plates, Boats, Combustion Trays, Grinding Pieces, Insulating powders, Cement

14 TUBES DEGUSSIT A24 Ød Ø D Ø d max. Product No. 3 1, * * * * * * Ø D Ø d max. Product No. DEGUSSIT A * normative size for thermocouple ARGE-DIAMETER TUBES Ø D Ø d max. Product No Ød Order-related manufacture 14 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

15 TUBES - ONE END COSED Ø D Ø d max. Product No. 3 1, * * * * * * * * DEGUSSIT A24 Ød Ø D Ø d max. Product No. DEGUSSIT A * standard size for thermocouple FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 15

16 THIN INSUATING TUBES Ø D Ø d max. Product No. 0,5 0, ,6 0, ,8 0, Ød 1 0, , ,1 0, ,2 0, , ,6 0, ,7 1, , , ,5 1, ,7 1, TUBES - THIN WAED Ø D Ø d max. Product No Ød FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

17 TUBES FOR OXYGEN SENSORS Ø D Ø d max. Product No. DEGUSSIT FZY Order-Related Product Ød TUBES FOR OXYGEN SENSORS - ONE END COSED Ø D Ø d max. Product No. DEGUSSIT FZY Order-Related Product Ød RECTANGUAR TUBES B H Wall Thickness max. Product No , , Order-Related Product B H TUBES FOR HEATING COIS Ø D Ø d max. Thread breadth Thread depth Thread pitch Product No Ød FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 17

18 MUTI-BORE TUBES - ROUND on request with notch Ø D Ø d Number of bores max. Product No. 0,9 0, ,2 0, ,2 0, ,55 0, , , ,35 0, ,5 0, ,8 0, , , * 4 0, * 4 1, , ,5 1, * 6 1, * 8 0, , , * 8,5 1, * * normative size for thermocouple MUTI-BORE TUBES - OVA on request with notch B H Ø d Number of bores max. Product No ,9 0, ,4 0, ,5 0, ,2 1, FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

19 INSUATING BEADS ROUND Ø D Ø d Number of bores Product No. 4 0, , , , INSUATING BEADS ANGUAR Ø D Ø d Product No. 3, , , , , Ød FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 19

20 PROTECTIVE TUBES FOR STANDARD-ENGTH THERMOCOUPES - ONE END COSED DEGUSSIT A24 Ød Ø D Ø d max. Product No Ø D Ø d max. Product No. DEGUSSIT A MUTI-BORE TUBES FOR STANDARD-ENGTH THERMOCOUPES Ø D Ø d Number of bores max. Product No. 4 0, , , , ,5 1, ,5 1, THERMOCOUPES DEGUSSIT A24 Protective tubes and bore tubes ength outer protective tube 1 ength inner protective tube 2 ength bore tube FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

21 RODS Ø D max. Product No. 0, , , , , Ø D max. Product No. BARS Order-Related Product Tolerances Diameter: +1 / +4 mm ength: +/- 5 mm Deflection: max. 0,5 % of the total lenght BANDS B H max. Product No Order-Related Product B H FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 21

22 CRUCIBES - CYINDRICA, FAT BASE DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT FZY 1 2 H Ø D1 Ø D2 Approx. Vol. ml Product No , H H Ø D1 Ø D2 Approx. Vol. ml Product No. DEGUSSIT A H Ø D1 Ø D2 Approx. Vol. ml Product No. DEGUSSIT A , , H Ø D1 Ø D2 Approx. Vol. ml Product No. DEGUSSIT FZY Order-Related Product 22 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

23 CRUCIBES CONICA HIGH FORM H Ø D1 Ø D2 Ø D3 Approx. Vol. ml Product No DEGUSSIT FZY H Ø D1 Ø D2 Ø D3 Approx. Vol. ml Product No. DEGUSSIT FZY Order-Related Product 3 H CRUCIBES CONICA WIDE FORM H Ø D1 Ø D2 Ø D3 Approx. Vol. ml Product No H 3 CRUCIBES - CYINDRICA, ROUND BASE H Ø D1 Ø D2 Approx. Vol. ml Tammann No. Product No I a I b I c II a II b II c III a III b III c ,070 IV a Tammann H FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 23

24 SIP-ON CRUCIBES Approx. Vol. ml Product No Order-Related Product Ø5 Ø4 0, Ø2 Ø4 SIP-ON CRUCIBES Approx. Vol. ml Product No Order-Related Product Ø 17 Ø 16 R 8 R Ø 2,5 Ø 3,6 SIP-ON CRUCIBES Approx. Vol. ml Product No Order-Related Product Ø8 Ø6 ( 15 ) 0,6 6 8,4 8 6 Ø2,55 Ø4,3 24 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

25 BOATS B H W Approx. Vol. ml Product No , , , B W H COMBUSTION TRAYS B H W Approx. Vol. ml Product No B H W Approx. Vol. ml Product No. DEGUSSIT A B DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT FZY H B H W Approx. Vol. ml Product No. DEGUSSIT A * W B H W Approx. Vol. ml Product No. DEGUSSIT FZY Order-Related Product * W conical FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 25

26 PATES - ROUND DEGUSSIT A25 H Ø D Product No PATES ROUND WITH HOE H Ø D Product No. DEGUSSIT A Plates sizes of plates up to approx. Ø 350 x 20 upon request H Ø D Ø d Product No Plates sizes of plates up to approx. Ø 350 x 20 upon request 26 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

27 PATES - RECTANGUAR B H Product No DEGUSSIT A25 FRIAIT FZM H B H Product No. DEGUSSIT A B B H Product No B H Product No. FRIAIT FZM Plates sizes of plates up to approx. 700 x 350 x 20 upon request FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 27

28 GRINDING BODIES H Ø D pcs./l pcs./kg kg/l Product No , , , , , INSUATING POWDER - CACINED AUMINIUM OXIDE Al 2 O 3 >99,5 % Type Crystal size Product No. VM 99% < 10 µm INSUATING POWDER - FUSED AUMINIUM OXIDE Al 2 O 3 >99,7% Type Crystal size Product No. E No. 100 ~ 150 µm E No. 250 ~ 40 µm CEMENT AUMINIUM OXIDE A 2 O 3 >95% Type Crystal size Product No. A2O3 ~ 150 µm FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

29 Ø D Product No. PRECISION BAS 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Other dimensions and further geometrical tolerances upon request Quality: Grade 25, polished surface Sphericity: 0,6 µm Diameter Tolerance: 2,5 µm FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 29

30

31 SURFACE FINISHING Fine Grinding Tools SURFACE FINISHING Fine Grinding Tools, Burnishing Wheels

32 FINE-GRINDING TOO - BENCHSTONE DEGUSSIT A24 Dimensions (mm) Colour Type Product No. 100 x 25 x 10 ruby red fine x 25 x 10 ruby red medium x 25 x 15 ruby red fine x 25 x 15 ruby red medium x 50 x 12 ruby red fine x 50 x 12 ruby red medium Dimensions (mm) Colour Type Product No. DEGUSSIT A x 25 x 10 white coarse x 25 x 15 white coarse FINE-GRINDING TOO - BENCHSTONE IN WOODEN CASE, REMOVABE DEGUSSIT A24 Dimensions (mm) Colour Type Product No. 120 x 50 x 10 ruby red fine / medium FINE-GRINDING TOO - BENCHSTONE IN WOODEN CASE, GUED IN DEGUSSIT A24 Dimensions (mm) Colour Type Product No. 100 x 25 x 10 ruby red fine x 25 x 10 ruby red medium x 50 x 10 ruby red fine x 50 x 10 ruby red medium x 50 x 12 ruby red fine x 50 x 12 ruby red medium FINE-GRINDING TOO - TRIANGUAR Dimensions Colour Type Product No. (mm) DEGUSSIT A x 25 x 10 white coarse Dimensions (mm) Colour Type Product No. 100 x 4 ruby red fine x 4 ruby red medium x 6 ruby red fine x 6 ruby red medium x 6 ruby red coarse x 8 ruby red fine x 8 ruby red medium x 8 ruby red coarse x 10 ruby red fine x 10 ruby red medium x 10 ruby red coarse x 13 ruby red fine x 13 ruby red medium x 13 ruby red coarse FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

33 FINE-GRINDING TOO - RECTANGUAR Dimensions (mm) Colour Type Product No. 100 x 6 x 3 ruby red fine x 6 x 3 ruby red medium x 8 x 6 ruby red fine x 8 x 6 ruby red medium x 8 x 6 ruby red coarse FINE-GRINDING TOO - SQUARE Dimensions (mm) Colour Type Product No. 100 x 4 ruby red fine x 4 ruby red medium x 6 ruby red fine x 6 ruby red medium x 6 ruby red coarse x 8 ruby red fine x 8 ruby red medium x 8 ruby red coarse x 10 ruby red fine x 10 ruby red medium x 10 ruby red coarse x 13 ruby red fine x 13 ruby red medium x 13 ruby red coarse FINE-GRINDING TOO - SEMI-CIRCUAR Dimensions (mm) Colour Type Product No. 100 x 10 ruby red medium x 10 ruby red coarse FINE-GRINDING TOO - CIRCUAR Dimensions (mm) Colour Type Product No. 100 x 4 ruby red fine x 4 ruby red medium x 6 ruby red fine x 6 ruby red medium x 6 ruby red coarse x 8 ruby red fine x 8 ruby red medium x 8 ruby red coarse x 10 ruby red fine x 10 ruby red medium x 10 ruby red coarse FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 33

34 ASSORTMENT OF FIES Dimensions (mm) The Files are also available separately Colour Type Product No. Assortment x 10 ruby red medium x 10 ruby red medium x 8 x 6 ruby red coarse x 6 ruby red medium x 10 ruby red coarse ASSORTMENT OF FIES - MIDGET FIES Dimensions (mm) Colour Type PU pcs. Product No. Assortment x 2 ruby red fine x 3 ruby red fine x 1 ruby red fine x 2 ruby red fine x 3 x 0,3 ruby red fine x 1 ruby red fine x 2 ruby red fine x 3 ruby red fine x 4 ruby red fine x 5 x 1,5 ruby red fine x 4 x 1,5 ruby red fine The files are also available separately 34 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

35 FINE-GRINDING TOO - BADE Dimensions (mm) Colour Type Product No. 100 x 15 x 3/0,5 ruby red fine x 15 x 3/0,5 ruby red medium FINE-GRINDING TOO - TAPERED Dimensions (mm) Colour Type Product No. 100 x 30 x 7/2 ruby red medium FINE-GRINDING TOO - RHOMBOID Dimensions (mm) Colour Type Product No. 100 x 13 x 5 ruby red coarse FINE-GRINDING TOO - CONICA Dimensions (mm) Colour Type Product No. 100 x 5 x 2 ruby red fine x 5 x 2 ruby red coarse FINE-GRINDING TOO - PENCI Dimensions (mm) Colour Type Product No. 100 x 5 ruby red fine FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 35

36 FINE-GRINDING TOO - MOUNTED POINT, CYINDRICA H Ø D Ø d Type Product No ,35 fine fine ,35 fine fine ,35 fine fine fine fine fine fine fine ,35 medium medium ,35 medium medium ,35 medium medium medium medium medium medium medium Order-Related Product FINE-GRINDING TOO - MOUNTED POINT, CYINDRICA-CONICA point angle 60 H Ø D Ø d Type Product No ,35 fine fine fine fine fine fine ,35 medium medium medium medium medium medium Order-Related Product 36 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

37 FINE-GRINDING WHEES B Ø D Ø d Design Product No. fine with metal bushing with metal bushing with metal bushing with metal bushing with metal bushing B with metal bushing with metal bushing without metal bushing without metal bushing without metal bushing without metal bushing without metal bushing without metal bushing without metal bushing Order-Related Product Profile 2 and 3 upon request Ød BURNISHING WHEES Ø D1 Ø D2 Ø D3 a Product No Order-Related Product 1 2 fine 3 a 12 BURNISHING WHEES Ø D1 Ø D2 Ø D3 a Product No. fine Order-Related Product 1 2 a 3 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 37

38 COMPETENCE PUS RESPONSIBIITY Our customers rightly expect first-class performance with lasting value. Besides the competence to achieve this, we also undertake the responsibility for it. Ask for the evidence: FRIATEC is the technological and market leader in ceramic materials for the 21st Century Image-intensifier for radiology 13 Guide strip for the printing industry 02 X-Ray tube for radiology 14 Isolator for the printing industry 03 Pressure sensor for aerospace 15 Square tubes for the printing industry 04 Camera housing for aerospace 16 Tubes, rods and capillaries for high temperature applications 05 Accelerator tube for radiologye 17 Thermal protection tubes for the glass and metallurgical industries 06 Feedthroughs for high-vacuum applications 18 Crucibles and boats for industry and research 07 High-voltage feedthroughs for vacuum technology 19 FZY-probes for oxygen measurement in gases 08 Insulating tubes for high-vacuum technology 20 Dielectric elements for fuel cells 09 High current feedthroughs for energy systems 21 Dielectric elements for fuel cells 10 Wafer carrier for the semiconductor industry 22 Thermal protection tubes for high temperature applications Shaping roller for the glass industry Test plates for the semiconductor industry 12 Sensor elements for the semiconductor industry Glow-block for heat treatment of lamp filaments FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range

39 Electrical Engineering High Temperature Technology Mechanical Engineering Surface Finishing Ozone generator for the semiconductor industry 37 Stirrers for the chemical industry 26 Control discs for production and laboratory processes 38 High-pressure pump piston for the chemical industry 27 Dosing pistons with control edge for the food-processing and 39 Adhesive nozzle for the paper industry pharmaceutical industries 40 Valve disc for pulp-processing 28 Pump inserts for medical technology 41 Vacuum plate for paper-making 29 Float body for flow-measurement in the chemical industry 42 Protection tubes for the glass industry 30 Electrode holder for flow-measurement in the chemical industry 43 Midget file for the glass-processing industry 31 Flow meters for the food-processing industry 44 Hand lappers for the glass-processing industry 32 Welding pins for automotive-body manufacture 45 Grinding wheel for the glass-processing industry 33 Centring pin for automotive-body manufacture 46 Grinding tools for metal working 34 Metal-forming tools for automotive-body manufacture 47 Bench-stones for metal working 35 Isolation shells for magnetically-coupled pump in the chemical industry 48 Mounted points for metal working 36 Pump impeller for the chemical industry FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 39

40 FRIATEC Aktiengesellschaft - Ceramics Division Steinzeugstrasse Mannheim (Germany) Tel info-frialit@friatec.de e 0,3.III15.tp