PRODUCTS OVERVIEW. An Easy Guide to Hempel s Extensive Product Range

Transcription

1 PRODUCTS OVERVIEW An Easy Guide to Hempel s Extensive Product Range Hempel Products Overview BrochureV14.indd 8 1/14/13 4:11:57 PM

2 Introduction to Hempel A/S The Hempel Group of companies was established in 1915 by J.C Hempel with the motto Quality and Service, which is still the hallmark of the Hempel Group. All of the operational companies within the Hempel Group are owned wholly or in part by the J.C Hempel Foundation. Since the first Hempel factory started production in 1915 in Denmark, the group has grown to become a worldwide enterprise with 10 research centres, 24 manufacturing plants, 48 sales offices and more than 150 stock points around the world. Hempel is active in several strategic segments including Marine, Protective, Container, Decorative and Yacht. MARINE PROTECTIVE CONTAINER Marine coatings have traditionally been the core business of Hempel and since 1915, we have grown to have one of the most extensive supply networks in the Marine Market, servicing marine customers with products of the same high quality all around the world. Hempel s range of protective coatings cover a wide range of applications as diverse as wind turbines, mining structural and process plants, onshore and offshore constructions, bridges, rail cars, gas and petrochemical plants, pipe coatings, civil structure and general industry. Hempel is the market leader for coatings in the container industry. 95 percent of the containers in the world are being built in China and over a quarter of these are coated by Hempel. Our solid experience and knowledge in this industry ensures the highest degree of quality and protection for container owners and manufacturers. DECORATIVE Hempel manufactures an extensive range of high quality decorative paints ideal for many applications, from private houses and villas to the largest commercial buildings. Hempel s extensive product range includes high performance emulsions and enamels, together with a variety of textured finishes and special effect paints. YACHT Hempel provides coatings for all types of vessels, from small aluminum fishing boats to luxury sailing yacht. Hempel yacht paints are produced to the highest standards, with the primary aim of meeting the demands of the marine environment and complying with important environmental issue. 1 Hempel Products Overview BrochureV14.indd 1 1/14/13 4:11:40 PM

3 Hempel : Global Supplier for Paint Related Solution Hempel develops coatings that satisfy the needs and requirements of customers for the different segments. In fact, our paints are used in some of the most corrosive and diffi cult environments. As an innovative organization, Hempel is continuously enhancing and developing new products that offer high performance with minimal impact on the environment. Our products have undergone rigorous internal and external testing and are approved by many independent testing and research institutions. We are pleased to highlight a select range of products in the following categories: Control GLOBIC 9000 GLOBIC 6000 OCEANIC + OLYMPIC + DYNAMIC HEMPASIL HEMPASIL 77 A low friction, self smoothening, SPC antifouling with a high solid contents. A combination of nano-capsule acrylate copolymers with bioactive mixture that makes it suitable for operating in aggressive fouling waters. Suitable for deep-sea vessel operating at low to high speed. For dry-docking intervals of up to 90 months. A low friction, self smoothening, SPC antifouling with a high solid contents. An effi cient bioactive mixture makes it suitable for moderate aggressive fouling waters. Suitable for deep-sea vessels operating at medium to high speed. For dry-docking interval of up to 60 months. A selfpolishing antifouling with a high solids content. An bioactive mixture makes it suitable for protection on vessel operating in medium aggressive fouling waters. Hydrolysis and Ion Exchange will added making controlled selfpolishing possible. Suitable for deep-sea vessels operating at medium to high speed with high activity. For dry-docking interval of up to 60 months. A selfpolishing antifouling with a high solids content. An bioactive mixture makes it suitable for protection on vessel operating in not overly aggressive fouling waters. Ion Exchange will added making controlled selfpolishing possible. Suitable for deep-sea vessels operating at medium to high speed with high activity. For dry-docking interval of up to 36 months. A high-solids, self smoothening and selfpolishing antifouling based on a hydrolysing silyl acrylate binder that ensures effective polishing control. For vessels operating at low to medium spend and frequent calls in port activity. For drydocking interval of up to 90 months. A biocide-free, silicone fouling release coating with a high solids content for deep sea, high activity scheduled vessels with service speed in the knot range, eg. container vessels, ferries, LNG/LPG carriers, etc. A copper-free, biocide-free, silicone fouling release coating with a high solids content for High Speed Craft (HSC), powerful commercial and military vessels with service speeds in excess of 25 knots and with medium to high activity. 58 ± 1 58 ± 1 60 ± 1 60 ± 1 58 ± 1 69 ± 1 70 ± 1 4mils 4mils Hempel Products Overview BrochureV14.indd 2 1/14/13 4:11:52 PM

4 Control HEMPASIL NEXUS X-TEND A high-solids one-component silicone based tiecoat for repair and touch-up areas of existing fouling release systems μ 4.8 mils HEMPASIL X A third generation fouling release coating with high solids content. 71 ± 1 1 It provides a smooth, low surface energy repellent surface with unique fouling release properties. A hydrogel micro layel prevent fouling organism to adhere fi rmly while silicone polymers facilitate self cleaning. A high fuel saving potential. HEMPASIL NEXUS X-SEAL A fl exible three-component silicone-based product used as a seals for the HEMPASIL FOULING RELEASE system, establishing a bridge between the aged antifouling system and the Hempasil topcoat. 54 ± μ 4.8 mils HEMPASIL NEXUS A high-solids three-component silicone based product used as a tiecoat for the HEMPASIL FOULING RELEASE system, securing adhesion between the anticorrosive system and the Hempasil topcoat. 56 ± 1 Shopprimer Shopprimer HEMPEL S SHOPPRIMER E A two-component polyamide shopprimer, pigmented with zinc phosphate rust-inhibiting pigments. Suitable for automatic spray application μ 0. Shopprimer HEMPEL S SHOPPRIMER ZS A two-component, low-zinc, solvent-borne ethyl silicate shopprimer. Suitable for automatic spray application with welding and gas cutting properties. 28 ± 1 15 μ 0. Shopprimer HEMPEL S SHOPPRIMER ZS A two-component, solvent-borne ethyl silicate shopprimer. Suitable for automatic spray application with welding and gas cutting properties. 28 ± 1 15 μ 0. Zinc Silicates Inorganic zinc silicate HEMPEL S GALVOSIL A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion. It has excellent chemical resistance within the ph range ± 1 Inorganic zinc silicate HEMPEL S GALVOSIL A two-component, medium-zinc, solvent-borne, selfcuring inorganic zinc silicate coating. A general purpose rust-preventing primer in paint system for long-life protection of steel exposed from moderately to severely corrosive environment. 61 ± 1 3 Hempel Products Overview BrochureV14.indd 3 1/14/13 4:11:53 PM

5 Epoxies Zinc Rich Epoxy ZINC A zinc-rich primer for container and other purposes use. 50 ± 1 40 μ 1. Zinc Rich Epoxy ZINC A versatilve, VOC-compliant, long term primer on steel for, polyurethane and polysiloxane coating systems in severely corrosive enviroment. 65 ± 1 Pure Tank-lining A tank lining with excellent resistance to a widerange of chemicals. 65 ± 1 Phenolic Tank-lining A tank lining with excellent resistance to a widerange of chemicals. 68 ± 1 Phenolic Tank-lining An interior lining in tanks, pipelines, etc. for hot water, brine, crude oil and potable water. 68 ± 1 Phenolic Solvent Free A solvent-free, two-component, high-build phenolic (novolac) paint, which cures to a durable tank lining with very high corrosion protection properties and excellent chemical resistance μ 10 mils - 2 Suitable for new and old storage tank containing oils, fuels, bio fuels and a wide range of chemicals. Phenolic Tank-lining A two-component solventfree high build amine cured phenolic (novolac) coating. Suitable for lining in potable water tanks and pipelines. 500μ 20mils Abrasionresistance MULTI-STRENGTH 45751/3 A high-strength coating for areas exposed to abrasion and aggressively corrosive climates such as ramps, drilling decks, ship hulls and holds of bulk carriers. 79 ± μ 8 mils Solvent free SPRAY-GUARD 35490/3 A heavy-duty coating for steel and concrete exposed to severely corrosive conditions and/or impact such as splash zones and decks μ mils Solvent free MULTI-STRENGTH A high-build coating with good resistance to fresh water, sea-water, crude oil and abrasion. Suitable as a heavy duty coating on steel exposed to abrasion where solvent-free materials are required and as alining in potable water tanks and pipelines. 300 μ 1 Epoxy mastic MASTIC 45880/1 A high-solids, self-primed, surface tolerant multi-purpose coating for maintenance and new constructions. 80 ± μ Epoxy sealer-tie coat (below water) A high solid extended recoat interval to top coats. For marine and protective use as a tie coat between and physically drying coatings. For marine use also as a sealer of old antifouling. 46 ± 1 μ 4mils HEMPUDAR FAST DRY A two-component, polyaine paint containing zinc phosphte with a very short drying time. Suitable for especially fast recoatable in-shop application. 62 ± A two-component, high-build, polyamide adduct-cured paint which cures to a hard and tough coating with good resistance to abrasion, seawater and crude oils. 69 ± A solvent-free, two-component, high-build polyamine paint. Suitable for lining in potable water tanks and pipelines. 200μ 8mils An anticorrosive two-component, modified polyamide. For atmospheric and immersion service used as a tiecoat between and physically drying coatings. For immerse service it can also replace one anti-corrosive primer coat for the underwater coating system and at the same time act as tiecoat for antifouling or it may also be used as a sealer for old antifoulings. 61 ± u 4 Hempel Products Overview BrochureV14.indd 4 1/14/13 4:11:53 PM

6 Epoxies Epoxy Primer Epoxy Primer Epoxy Epoxy Epoxy Glass fl ake Universal Primers Universal Primer s FIBRE PRIMER MULTI-STRENGTH ULTRA STRENGTH MULTI-STRENGTH GF UNIQ 47741/3 QUATTRO A two-component, high-build, polyamide paint which cures to a hard and tough abrasion resistant anticorrosive coating with improved crack resistance. Reinforced with inorganic fi bres, excellent anticorrosive and mechanical properties short drying time. A two component, polyamide added cured paint, which cures to a strong and highly corrosion resistant coating. As a maintenant and repair primer, intermediate, and/or fi nishing coat in Hempadur systems in severely corrosive environment. A two-component polyamide-cured primer containing zinc phosphate as corrosion inhibiting pigment. For primer or intermediate coat in container system. A two-component polyamide adduct-cured paint. It cures to a fl exible, well adhering coating with good abrasion and impact resistance. An amine- coating that is hard, impact and abrasion resistant. A self-priming, high build coating suitable for maintenance. A self-priming, two-component, high-build, pure polyamide paint which cures to a very abrasion, impact and corrosion resistant coating. As a heavy duty coating for areas exposed aggressive corrosive climate such as hatch coamings and cargo holds of bulk carriers. A self-primed, high-build coating mainly for areas subject to abrasion and/or a highly corrosive environment, such as splash zones, jetty pilings and work decks. A self-priming, two-component, high-build, pure paint, polyamide/amine cured. Abrasion and corrosion resistant. A two-component, high-build, paint which cures to a hand and tough coating with good resistance to abrasion, seawater and various oils. 70 ± 1 54 ± 1 51 ± 1 55 ± 1 84 ± 1 75 ± 1 87 ± 1 80 ± 1 72 ± μ 1.6mils 350μ μ μ Modifi ed HEMPALIN ENAMEL HEMPALIN UNDERCOAT HEMPALIN ENAMEL HI-BUILD HEMPALIN PRIMER HEMPALIN PRIMER HI-BUILD HEMPEL S UNI- PRIMER As a general purpose finishing coat in alkyd systems on exterior and interior steel and woodwork in mildly to moderately corrosive environment. As a fi nishing coat in engine rooms including tanktops, main engines and auxiliary machinery. As a general purpose undercoating in alkyd paint systems on exterior and interior steelwork, wood, plaster, etc. in mildly to moderately corrosive environment. As a general purpose finishing coat in alkyd systems on exterior and interior steel and woodwork in mildly to moderately corrosive environment. As a fi nishing coat in engine rooms including tanktops, main engines and auxiliary machinery. A general purpose, relatively quick drying primer for protection of steel in mild to medium corrosive environments. As a general purpose, relatively quick drying primer for protection of steel in mild to medium atmospheric corrosive environments. A Quick-drying, one-component, modifi ed ester primer with zinc phosphate rust inhibiting pigments As a versatile primer on steel and metal surfaces for HEMPALIN or HEMPATEX in mild to medium corrosive atmospheric environment. It provides the possibility of reducing the number of primers for maintenance. 46 ± 1 53 ± 1 47 ± 1 49 ± 1 44 ± 1 42 ± 1 30 μ μ μ μ μ 3 mils 5 Hempel Products Overview BrochureV14.indd 5 1/14/13 4:11:54 PM

7 Polysiloxanes and Silicones Silicone Silicone Silicone Silicone Polysiloxane Polysiloxane Polyurethanes Acrylics Solventborne acrylic Solventborne acrylic Miscellaneous HEMPATEX HI-BUILD HEMPATEX ENAMEL As a primer, intermediate or fi nishing coat in moderately corrosive environment. As a self-primed repair and touch-up coating for containers. Resistant to salt water, splashes of aliphatic hydrocarbons, animal and vegetable oils. As an interior and exterior fi nishing coat in moderately to severely corrosive environment. Resistant to saltwater, splashes of aliphatic hydrocarbons and animal and vegetable oils. 42 ± 1 33 ± 1 75 μ μ 3 mils - 35 μ 1. Chlorinated rubber HEMPEL S SILICONE ZINC HEMPEL S SILICONE TOPCOAT HEMPEL S SILICONE ALUMINIUM HEMPEL S SILICONE ACRYLIC HEMPAXANE CLASSIC HEMPAXANE LIGHT HEMPATEX HI-BUILD A heat resistant zinc pigmented silicone primer for long-time corrosion protection of steel exposed to high temperatures (from C/212 F to 400 C/752 F). A heat resistant coating pigmented with inert pigments offering long-term protection of hot pipelines, exhaust pipes, smoke stacks and other hot surfaces up to 260 C/500 F. A heat resistant aluminium pigmented polysiloxane paint. For long-term protection of hot pipelines, exhaust pipes, smoke stacks and other hot surfaces. Maximum service time, dry, of up to 600 C/1112 F. A heat resistant acrylic modifi ed polysiloxane coating offering long-term protection to hot pipelines, exhaust pipes, smoke stacks and other hot surfaces up to 200C/392F. Aluminium shade has a maximum service temperature of up to 400 C/752 F. A two-component, high-solids, high-gloss, polysiloxane enamel with excellent gloss and colour retention. An isocyanate free glossy decorative and protective, high build fi nishing coat for new steel structures in severely corrosive atmospheric environment. A two-component, high-solids, high-gloss, polysiloxane enamel with excellent gloss and colour retention. An isocyanate free glossy decorative and protective finishing coat for new steel structures in severely corrosive atmospheric environment. A self-primed coating or as an intermediate or fi nishing coat on steel structures in moderately to severely corrosive environment, including permanently submerged surfaces. Resistant to salt water, splashesof mineral oils, aliphatic solvents and a wide range of chemicals. 54 ± 1 58 ± 1 43 ± 1 29 ± 1 85 ± 1 82 ± 1 40 μ μ 1 mils 25 μ 1 mils 25 μ 1 mils 125 μ 75 μ 3 mils Polyurethane Polyurethane Polyurethane HEMPATHANE ENAMEL 55 HEMPATHANE TOPCOAT HEMPATHANE HS A two-component, high-gloss, acrylic polyurethane enamel coating with good colour retention. Suitable for use as a finishing coat on steel, aluminium, glassfi bre, reinforced polyester, plywood, hardwood etc. in severely corrosive environment. A two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and colour retention A two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention, contain zinc phosphate. 52 ± 1 42 ± 1 40 μ The information presented in this brochure serves only as an easy guide to identify the various products Hempel offers for the Protective and Marine segments. It is not intended as an exhaustive list of all Hempel s products. You are advised to refer to the relevant Product Data Sheets and Material Safety Data Sheets for more detailed information on the individual products. Furthermore, the data and information in this brochure represents only test results or experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appropriateness under the actual conditions of any intended use of the products here in must be determined exclusively by the buyer and/or user. The products are supplied and all technical assistance is given subject to Hempel s general conditions of sales, delivery and service, unless otherwise expressly agreed in writing. The manufacturer and seller disclaim, and buyer and/or user waive all claims involving, any liability, including but not limited to negligence, except as expressed in said general conditions for all results, injury or direct or consequential losses or damages arising from the use of the products as recommended above, on the overleaf or otherwise. Product data are subject to change without notice and become void five years from the date of issue. 51 ± 1 65 ± 1 35 μ 1. 6 Hempel Products Overview BrochureV14.indd 6 1/14/13 4:11:55 PM

8 Hempel Products Overview BrochureV14.indd 7 1/14/13 4:11:56 PM