PRODUCTS FOR METALLOGRAPHIC PREPARATION. DRP Ventures

Transcription

1 S FOR METALLOGRAPHIC PREPARATION DRP Ventures

2 Division DRP Ventures Inc. We would like to welcome the opportunity to introduce our latest catalogue. It provides an increasing range of quality products in sectioning, mounting, grinding and polishing. Sales and Technical Services are supported by competent and motivated personnel who continue to make every effort to earn and maintain your trust. has a long standing tradition serving their customers with technical assistance and metallographic consumables. It is with pleasure that in May 2004, Anamet acquired the client base of Clemex Technologies for its metallographic consumable market. This gain represents an opportunity to expend Anamet s presence in Canada and the United States. We thank you for being at the heart of our commitment and look forward to a continued relationship. Our dedication for excellence begins with our commitment in providing you with only the very best. Sincerely, Diane R. Pilley, B. Sc. Division DRP Ventures Inc. 655 Jean-Paul Vincent, Suite 9, Longueuil, Qc, Canada J4G 1R3 Tel: Fax: anamet@anamet.com Website :

3 ORDERING INFORMATION ON THE NEXT PAGE SECTIONING Abrasive Cut-Off Wheels. 1 Small Abrasive Cut-Off Wheels. 8 Diamond Cut-Off Wheels. 9 Wafering Diamond Blades. 10 Cubic Boron Nitride. 11 Sectioning Accessories. 12 MOUNTING Compression Mounting. 13 Ambient Mounting. 16 Castable Mounting Accessories. 20 GRINDING Abrasive Belts. 23 Abrasive Rolls. 24 Abrasive Strips. 25 Abrasive Discs. 26 Double Sided Adhesive. 29 Magnetic Disc System. 30 Diamond Discs. 31 Diamond Spot Discs. 32 Dressing sticks for Diamond Discs. 32 POLISHING Polishing Powders. 33 Polishing Suspensions. 34 Abrasive Powders. 36 Diamond Extenders. 38 Diamond Abrasives. 39 Diamond Suspensions. 40 Diamond Slurries ( Water & Oil ). 41 Polishing Cloths. 42 FIELD METALLOGRAPHY Sampling. 59 Abrasive Discs. 60 Polishing Cloths. 61 HARDNESS TESTING ACCESSORIES 63 TROUBLESHOOTING GUIDE Sectioning. 65 Compression Mounting. 66 Ambient Mounting. 67 Grinding and Polishing. 68 CONVERSION TABLES 71 INDEX BY DESCRIPTION 72

4 Sales Service. ORDERING INFORMATION is committed to providing quality products and services to its customers. The majority of the products in our catalogue are in inventory and can be shipped within 24 hours. Rush orders receive special attention and are processed immediately. Technical Service. Specialists are available to answer your questions and advise you in selecting the products best suited to your requirements. Customer Service. seeks to improve customer service and products. If, for any reason, you are not satisfied with our service or products, please advise us, so corrective measures can be taken. ORDERING We are pleased to accept your order by: Phone: Fax: Mail: Jean-Paul Vincent, Suite 9 Longueuil, Quebec Canada J4G 1R3 anamet@anamet.com Credit Card: Quantity Discount. Many items can be discounted when purchased in quantity. Please contact us with your specific requirements. Blanket orders are welcomed. Minimum Orders. All orders are accepted and therefore we do not have a minimum order requirement.

5 Claims. Your order will be filled, checked and packaged with care. Should damages occur please inform the carrier and. If the packaged material arrives damaged, please retain the packing carton and packing material for inspection by the carrier (if requested). Shipments. ORDERING INFORMATION is committed to providing quality products and services to its customers. Unless you request a specific shipping method, our staff will determine the most expedient and efficient means of transportation. Appropriate charges for freight, insurance and forwarding costs will be added to the invoice, unless paid directly by the customer. A handling charge will be added to the invoice when shipping "Hazardous material" and "Controlled temperature products". Terms and Conditions of Sale. The acceptance of any order is on the understanding that the purchaser agrees to the following terms and conditions of sale: Prices: Printed prices are subject to change without notice. Quotations : Quotations are subject to confirmation on receipt of order and retains the right to amend any accidental errors or omissions on quotations. Delivery : Every effort is made to adhere to delivery dates, no liability can be accepted in the case of non-delivery or delayed delivery. Amendments or Cancellations: Every effort is made to meet customer's individual requirements. Amendment or cancellation of an order or any part of an order is allowed only after acceptance by. Terms of Payment: Terms are 30 days with established credit. All accounts are for settlement within 30 days of invoice date. Important notice to purchaser : All statements, technical information and/or recommendations contained herein are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties, expressed or implied. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proven to be defective. Neither the seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising from the use or the inability to use the product. Before using, user shall determine the suitability of the product for his intended use, and user assumes all risk and liability whatsoever in connection therein. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller or manufacturer.

6 The first step in metallographic sample preparation consists in sectioning a sample from a larger given piece to obtain a representative crosssection. Sectioning a material without causing structural changes defines the perfect cut. Abrasive cut-off wheels are made of abrasive particles bonded with a resin, a resin/rubber or a rubber matrix. They are designed to wear away, continuously exposing sharp new abrasive particles. SECTIONING A "Soft" wheel is used for cutting hard and brittle materials. It provides new surfaces of cutting abrasives more rapidly while the bond breaks down. The "Hard " wheel has a slower break down bond rate, which is suitable for soft and ductile materials. Adequate cooling is required to remove debris and avoid thermal damages to the sample. The careful combination of particle type, particle size and wheel hardness helps prevent burns and distortions, yet provide maximum useful life. Cutting requires a sufficient amount of pressure to be applied to the abrasive wheel while cutting, excessive pressure will cause the abrasive wheel to stall or break. Cut-off wheels with aluminum oxide as the abrasive are generally used for cutting ferrous samples, alloys and most other metals. Silicon carbide is recommended for non-ferrous and other nonmetallic materials. 9" 10" 12" 14" APPLICATIONS (229mm) (254mm) (305mm) (355mm) HRC60+, Carburized Steel, Tool Steel HRC50-65 Hard Steel CW CW CW CW HRC45-60, Hard Steel HRC35-50, Soft or Annealed Steel CW CW CW CW HRC30-45, Medium Hard Steel HRC up to 35 CW CW CW CW HRC20-35, Soft or Annealed Steel Ultrathin, Delicate Hard Non-Ferrous, Glass, Mineral Med. Non-Ferrous, Uranium, Titanium, Zirconium Med. Non-Ferrous, Titanium, Zirconium CW09-Ti10 CW10-Ti10 CW12-Ti10 CW14-Ti10 Soft Non-Ferrous, Aluminum, Brass Soft Non-Ferrous, Aluminum, Brass CW09-NF10 CW10-NF10 CW12-NF10 CW14-NF10 Ferrous, HRC A-12 Ferrous, HRC50-118B-12 Non-Ferrous 118C-12 TEL: FAX: anamet@anamet.com 1

7 SECTIONING VERY HARD Stock, HRC 60 and up. RECOMMENDED USE: Carburized Steel, Tool Steel ARBOR HOLE: 1.25 inch (32mm) BOND: Resin-Rubber ABRASIVE: Al2O3 QUANTITY: 10/box THICKNESS " (229mm) 0.070" (1.8mm) " (254mm) 0.075" (1.9mm) " (305mm) 0.093" (2.3mm) " (355mm) 0.093" (2.3mm) HARD Stock, HRC RECOMMENDED USE: Hard Steel ARBOR HOLE: 1.25 inch (32mm) BOND: Resin-Rubber ABRASIVE: Al2O3 QUANTITY: 10/box THICKNESS COLOR CW " (229mm) 0.070" (1.8mm) Yellow CW " (254mm) 0.075" (1.9mm) Yellow CW " (305mm) 0.093" (2.3mm) Yellow CW " (355mm) 0.093" (2.3mm) Yellow HARD Stock, HRC RECOMMENDED USE: Hard Steel ARBOR HOLE: 1.25 inch (32mm) BOND: Resin-Rubber ABRASIVE: Al2O3 QUANTITY: 10/box THICKNESS " (229mm) 0.070" (1.8mm) " (254mm) 0.075" (1.9mm) RE 10" (254mm) 0.075" (1.9mm) " (305mm) 0.093" (2.3mm) A 12" (305mm) 0.062" (1.5mm) " (355mm) 0.093" (2.3mm) 2 CANNOT FIND A SPECIFIC ITEM, CALL. WE TEL: ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

8 MEDIUM Stock, HRC RECOMMENDED USE: Soft or Annealed Steel ARBOR HOLE: 1.25 inch (32mm) BOND: Resin ABRASIVE: Al2O3 QUANTITY: 10/box NEW SECTIONING THICKNESS COLOR CW " (229mm) 0.070" (1.8mm) Orange CW " (254mm) 0.075" (1.9mm) Orange CW " (305mm) 0.093" (2.3mm) Orange CW " (355mm) 0.093" (2.3mm) Orange MEDIUM Stock, HRC RECOMMENDED USE: ARBOR HOLE: BOND: ABRASIVE: QUANTITY: Medium Hard Steel 1.25 inch (32mm) Resin-Rubber Al2O3 10/box THICKNESS " (229mm) 0.070" (1.8mm) " (254mm) 0.075" (1.9mm) " (305mm) 0.093" (2.3mm) " (355mm) 0.093" (2.3mm) MEDIUM Stock, HRC up to 35 RECOMMENDED USE: Medium Hard Steel ARBOR HOLE: 1.25 inch (32mm) BOND: Resin ABRASIVE: Al2O3 QUANTITY: 10/box NEW THICKNESS COLOR CW " (229mm) 0.070" (1.8mm) Red CW " (254mm) 0.075" (1.9mm) Red CW " (305mm) 0.093" (2.3mm) Red CW " (355mm) 0.093" (2.3mm) Red TEL: FAX:

9 SECTIONING SOFT Stock, HRC RECOMMENDED USE: Soft or Annealed Steel ARBOR HOLE: 1.25 inch (32mm) BOND: Rubber ABRASIVE: Al2O3 QUANTITY: 10/box THICKNESS " (229mm) 0.063" (1.6mm) " (254mm) 0.063" (1.6mm) " (305mm) 0.063" (1.6mm) " (355mm) 0.093" (2.3mm) ULTRATHIN, DELICATE RECOMMENDED USE: Delicate Cutting ARBOR HOLE: 1.25 inch (32mm) BOND: Rubber ABRASIVE: Al2O3 QUANTITY: 10/box THICKNESS " (229mm) 0.032" (0.8mm) " (254mm) 0.032" (0.8mm) " (305mm) 0.045" (1.1mm) HARD NON-FERROUS RECOMMENDED USE: Glass, Mineral ARBOR HOLE: 1.25 inch (32mm) BOND: Rubber ABRASIVE: SiC QUANTITY: 10/box THICKNESS " (229mm) 0.063" (1.6mm) " (254mm) 0.063" (1.6mm) " (305mm) 0.063" (1.6mm) " (355mm) 0.093" (2.3mm) 4 CANNOT FIND A SPECIFIC ITEM, CALL. WE TEL: ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

10 MEDIUM NON-FERROUS RECOMMENDED USE: Uranium, Titanium, Zirconium ARBOR HOLE: 1.25 inch (32mm) BOND: Rubber ABRASIVE: SiC QUANTITY: 10/box SECTIONING THICKNESS " (229mm) 0.063" (1.6mm) " (254mm) 0.063" (1.6mm) " (305mm) 0.063" (1.6mm) " (355mm) 0.093" (2.3mm) MEDIUM NON-FERROUS RECOMMENDED USE: Titanium, Zirconium ARBOR HOLE: 1.25 inch (32mm) BOND: Resin ABRASIVE: SiC QUANTITY: 10/box NEW THICKNESS CW09-Ti10 9" (229mm) 0.070" (1.8mm) CW10- Ti10 10" (254mm) 0.075" (1.9mm) CW12- Ti10 12" (305mm) 0.093" (2.3mm) CW14- Ti10 14" (355mm) 0.093" (2.3mm) SOFT NON-FERROUS RECOMMENDED USE: ARBOR HOLE: BOND: ABRASIVE: QUANTITY: Aluminum, Brass 1.25 inch (32mm) Rubber SiC 10/box THICKNESS " (229mm) 0.063" (1.6mm) " (254mm) 0.063" (1.6mm) " (305mm) 0.063" (1.6mm) " (355mm) 0.093" (2.3mm) TEL: FAX:

11 SECTIONING SOFT NON-FERROUS RECOMMENDED USE: Aluminum, Brass ARBOR HOLE: 1.25 inch (32mm) BOND: Resin ABRASIVE: SiC QUANTITY: 10/box NEW THICKNESS COLOR CW09- NF10 9" (229mm) 0.070" (1.8mm) Green CW10- NF10 10" (254mm) 0.075" (1.9mm) Green CW12- NF10 12" (305mm) 0.093" (2.3mm) Green CW14- NF10 14" (355mm) 0.093" (2.3mm) Green FERROUS, RC50+ RECOMMENDED USE: ARBOR HOLE: BOND: ABRASIVE: QUANTITY: Super and Ferrous Alloys 1.38 inch (35mm) Resin-Rubber Al2O3 10/box THICKNESS 118A " (305mm) 0.100" (2.5mm) FERROUS, RC50- RECOMMENDED USE: ARBOR HOLE: BOND: ABRASIVE: QUANTITY: Ferrous Alloys below RC inch (35mm) Resin-Rubber Al2O3 10/box THICKNESS 118B-12 12" (305mm) 0.100" (2.5mm) 6 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

12 NON-FERROUS RECOMMENDED USE: ARBOR HOLE: BOND: ABRASIVE: QUANTITY: Non-ferrous Alloys 1.38 inch (35mm) Resin-Rubber SiC 10/box SECTIONING THICKNESS 118C-12 12" (305mm) 0.100" (2.5mm) NOTES TEL: FAX:

13 SECTIONING SELECTION OF SMALL ABRASIVE CUT-OFF Blade size Aluminum Oxide Silicon Carbide 4" x 0.030" x 0.5" " x 0.030" x 0.5" " x 0.030" x 0.5" " x 0.030" x 0.5" " x 0.060" x 0.5" " x 0.030" x 0.5" SMALL ABRASIVE CUT-OFF S ARBOR HOLE: 0.5 inch (12.7mm) BOND: Resin-Rubber ABRASIVE: Al2O3 QUANTITY: 10/box THICKNESS " (102mm) 0.03" (0.76mm) " (127mm) 0.03" (0.76mm) " (152mm) 0.03" (0.76mm) " (178mm) 0.03" (0.76mm) " (203mm) 0.03" (0.76mm) " (178mm) 0.06" (1.5 mm) SMALL ABRASIVE CUT-OFF S ARBOR HOLE: 0.5 inch (12.7mm) BOND: Rubber ABRASIVE: SiC QUANTITY: 10/box THICKNESS " (102mm) 0.03" (0.76mm) " (127mm) 0.03" (0.76mm) " (152mm) 0.03" (0.76mm) " (178mm) 0.03" (0.76mm) " (203mm) 0.03" (0.76mm) " (178mm) 0.06" (1.5 mm) 8 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

14 SELECTION OF DIAMOND S Wheel Size Resin Bond Metal Bond Diamond Concentration Diamond Concentration High Low Medium High Low Medium 8" x 0.035" x 1.25" 140R R R M M M- 8 10" x 0.050" x 1.25" 140R R R M M M-10 12" x 0.070" x 1.25" 140R R R M M M-12 SECTIONING RESIN BOND ARBOR HOLE: QUANTITY: 1.25 inch (32mm) Each DIAMETER THICKNESS 140R R R- 8 8" (203mm) 0.035" (1.14mm) 140R R R-10 10" (254mm) 0.05" (1.27mm) 140R R R-12 12" (305mm) 0.07" (1.78mm) METAL BOND ARBOR HOLE: QUANTITY: 1.25 inch (32mm) Each DIAMETER THICKNESS 140M M M- 8 8" (203mm) 0.035" (1.14mm) 140M M M-10 10" (254mm) 0.05" (1.27mm) 140M M M-12 12" (305mm) 0.07" (1.78mm) TEL: FAX: anamet@anamet.com 9

15 SECTIONING SELECTION OF WAFERING DIAMOND S Wafering blades made of metal have diamond particles bound along the outside edge of the blade. The diamond blades are available in a resin or a metal bond. For sectioning with a wafering blade, a slow speed and an adequate coolant should be selected. The pressure to the wheel/sample contact point should not be applied with excessive force. To remove any metal debris, it is recommended to dress the wafering blade using a dressing stick. Metal Bond blades are recommended for alumina, ceramics, nitrides, zirconia, electronic packaging and soft metal base alloys. Cubic Boron Nitride blades are designed for ferrous and nickel-based super-alloys. Blade size Metal Bond Diamond Concentration CBN Bonded High Low Medium 3" x 0.006" x 0.5" 140M-3 141M-3 142M " x 0.012" x 0.5" 140M-4 141M-4 142M " x 0.015" x 0.5" 140M-5 141M-5 142M " x 0.020" x 0.5" 140M-6 141M-6 142M " x 0.025" x 0.5" 140M-7 141M-7 142M " x 0.045" x 0.5" 140M-8 141M-8 142M METAL BOND ARBOR HOLE: QUANTITY: 0.5 inch (12.7mm) Each DIAMETER THICKNESS 140M-3 141M-3 142M-3 3" ( 76mm) 0.006" (0.15mm) 140M-4 141M-4 142M-4 4" (102mm) 0.012" (0.30mm) 140M-5 141M-5 142M-5 5" (127mm) 0.015" (0.38mm) 140M-6 141M-6 142M-6 6" (152mm) 0.020" (0.50mm) 140M-7 141M-7 142M-7 7" (178mm) 0.025" (0.60mm) 140M-8 141M-8 142M-8 8" (203mm) 0.045" (0.70mm) 10 CANNOT FIND A SPECIFIC ITEM, CALL. WE TEL: ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

16 CUBIC BORON NITRIDE S SECTIONING ARBOR HOLE: QUANTITY: 0.5 inch (12.7mm) Each THICKNESS " ( 76mm) 0.006" (0.15mm) " (102mm) 0.012" (0.30mm) " (127mm) 0.015" (0.38mm) " (152mm) 0.020" (0.50mm) " (178mm) 0.025" (0.60mm) NOTES TEL: FAX: anamet@anamet.com 11

17 SECTIONING SECTIONING ACCESSORIES Dressing Stick DESCRIPTION 151 Diamond Dressing Stick, SiC 0.5" x 0.5" x 6" Diamond Dressing Stick, Al2O3 0.5" x 0.5" x 6" Diamond Dressing Stick, SiC 1" x 1" x 6" Diamond Dressing Stick, Al2O3 1" x 1" x 6" 1 Cutting Solutions There are two recommended cutting solutions for sectioning. Rust/Coolant Inhibitor is used when sectioning samples using large loads at high speeds. The coolant should be directed at the contact point between the section being cut and the abrasive wheel. The flow should be uniform on both sides of the wheel. Cutting oil is used when performing precision sectioning at low speeds. DESCRIPTION L 32 oz. Cutting Oil L 1 gal L 32 oz Rust/Coolant Inhibitor 3.8 L 1 gal L 5 gal. 12 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: FAX: anamet@anamet.com WE ARE CONTINUALLY ADDING S TO OUR INVENTORY.

18 Metallographic samples are mounted to protect edges of fragile materials and to prepare multiple samples of uniform size. Compression mounting is carried out using a mounting press where the sample and the selected mounting media material are inserted in the mounting cylinder. Heat and pressure are simultaneously applied during the mounting cycle of the sample. The different types of mounting media available are thermoplastic and thermosetting powders. MOUNTING Thermoplastic mounting material remains fluid at elevated molding temperatures and hardens during cooling. This resin can be used for fragile materials. Pressure can be applied when resin is in the molten state. A useful property of the thermoplastic resin is its transparency once cooled. It is much easier to detect the area of interest. Thermosetting mounting material is wood flour filled with phenolic compound that cures at elevated temperature and pressure. The available thermosetting powders are phenolic, diallyl phthalate and epoxies. The phenolic powder in the form of powders or preforms is the more commonly used. The diallyl phthalate is available with mineral or fiberglass filler. The edge retention of the glass filled is better than phenolic powder. The epoxies provide the best edge retention with low shrinkage. The selection of the type of compression mounting powder to use will depend on the abrasion rate of the media and the sample being mounted. Normally, one would choose a mounting medium with an abrasion rate comparable to that of the sample. Resin Form Type Molding Temperature Epoxy Powder Thermosetting F/148 0 C Phenolic Powder Preforms Thermosetting F/140 0 C Diallyl Phthalate Powder Thermosetting F/138 0 C Thermoplastic Powder Thermoplastic F/140 0 C Technotherm 3000 Powder Thermosetting F/170 0 C Properties Very hard. Edge retention. Low shrinkage. Resistant to chemical attack. General mounting. Rapid. High shrinkage. Fair edge retention. Not resistant to chemical attack. Good edge retention. Resistant to chemical attack. Low shrinkage. Transparent mounts. Slow cure. Not resistant to chemical attack. Adheres to copper. Electrically conductive. Not resistant to chemical attack. TEL: FAX: anamet@anamet.com 13

19 MOUNTING PHENOLIC Powders COLOR kg. / 5 lbs. ORANGE kg. / 5 lbs RED 9.1 kg. / 20 lbs kg. / 55 lbs kg. / 5 lbs GREEN 9.1 kg. / 20 lbs kg. / 55 lbs kg. / 5 lbs BLACK 9.1 kg. / 20 lbs kg. / 55 lbs. PHENOLIC Preforms Diameter: 1 inch ( 25 mm ) COLOR RED GREEN BLACK Diameter: 1.25 inch ( 32 mm ) Diameter: 1.50 inch ( 38 mm ) RED RED GREEN GREEN BLACK BLACK CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

20 DIALLYL PHTHALATE Powders SHORT GLASS FIBER MINERAL kg. / 1 lb kg. / 1 lb kg. / 5lbs kg. / 5lbs kg. / 20 lbs kg. / 20 lbs. MOUNTING EPOXY Powders kg. / 1 lb kg. / 5lbs kg. / 20 lbs kg. / 50 lbs. THERMOPLASTIC Powders kg. / 1 lb kg. / 5lbs kg. / 20 lbs kg. / 50 lbs. TECHNOTHERM 3000 CONDUCTIVE POWDERS NEW 231-L 1.0 kg. / 2.2 lbs. Technotherm 3000 is the electrically conductive resin in the Technotherm line. The graphite-filled resin has outstanding electronically conductive properties. TEL: FAX: anamet@anamet.com 15

21 Ambient mounting MOUNTING Ambient mounting technique is a suitable method when a specimen may be sensitive to pressure and heat involved in compression mounting. The most common systems for cold mounting materials are Epoxies, Acrylics and Polyesters. These systems are all made of two or three components consisting of resins and hardeners. Epoxies are slow curing and have low shrinkage properties, suitable for ceramic and mineral samples. Acrylics have a short polymerization time and give a clear transparent mount. Polyester resin is fast curing and provides an opaque white mount. General characteristics Name of Product Groups Curing time Epoxy Epoxy 24 hrs. 8 hrs. 1 hr. Exothermic Peak F / 90 0 C Technovit 4000 Polyester 15 min F / C Technovit 4004 Ganymede Acrylic 8 min F / C Technovit 4071 Acrylic 5 min F / C Technovit 5000 Acrylic 8 min F / C Formula 1 Acrylic 9 min F / 21 0 C Properties Cures slowly. Transparent. Excellent edge retention. Excellent abrasion resistance. Cures rapidly. Opaque. Excellent edge retention. Excellent abrasion resistance. Cures rapidly. Good edge retention. Clear. Some shrinkage. Cures rapidly. General purpose. Green translucent.. Some shrinkage. Conductive. Cures rapidly. Good edge retention. Some shrinkage. Resistant to chemical attack. Cures rapidly. Good edge retention. Clear. Some shrinkage. 16 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

22 EPOXY Systems EPOXY System, Curing time: 24 hours. DESCRIPTION QUANTITY KIT LIQUID LIQUID EPOXY, Kit. 1 Kit. 233-L *Hazardous product, extra handling and shipping fee. TITANIA EPOXY System, Curing time: 8 hours. DESCRIPTION QUANTITY KIT LIQUID POWDER Epoxy resin kit. Liquid,, 32 oz. CM8H-01K Epoxy resin kit. Liquid, 1 gal. CM8H-05K Epoxy resin. Liquid,, 32 oz. CM8H-R032 Epoxy resin. Liquid, 1 gal. CM8H-R01G Epoxy Hardener. 8 oz. CM8H-H008 Epoxy Hardener. 32 oz. CM8H-H032 *Hazardous product, extra handling and shipping fee. NEW MOUNTING OBERON EPOXY System, Curing time: 1 hour. NOTE: May take up to 3 hours to cure. NEW DESCRIPTION QUANTITY KIT LIQUID POWDER Epoxy kit. Liquid,, 32 oz. CM1H-01K Epoxy resin. Liquid, 1 gal. CM1H-R01G Epoxy Hardener. 32 oz. CM1H-H032 *Hazardous product, extra handling and shipping fee. ACRYLIC Systems TECHNOVIT 4004 System DESCRIPTION QUANTITY KIT LIQUID POWDER Technovit 4004, Large Kit. Powder, 2.0 kg. Liquid, 1000 ml. 235-L Technovit 4004, Powder. 2.0 kg R Technovit 4004, Liquid ml H *Hazardous product, extra handling and shipping fee. TEL: FAX: anamet@anamet.com 17

23 MOUNTING TECHNOVIT 4071 System DESCRIPTION QUANTITY KIT LIQUID POWDER Technovit 4071, Large Kit. Powder, 2.0 kg. Liquid, 1000 ml. 237-L Technovit 4071, Powder. 2.0 kg R Technovit 4071, Liquid ml H *Hazardous product, extra handling and shipping fee. TECHNOVIT 5000 SYSTEM, (Conductive) DESCRIPTION QUANTITY KIT LIQUID POWDER Technovit 5000, Powder. 1.0 kg R Technovit 5000, Liquid. 500 ml H *Hazardous product, extra handling and shipping fee. FORMULA 1 DESCRIPTION QUANTITY KIT LIQUID POWER Formula 1, Large Kit. Powder, 2.3 kg Liquid 1.9 L 206-L Formula 1, Powder. 2.3 kg / 5.0 lbs P Formula 1, Liquid. 1.9 L/64 oz L *Hazardous product, extra handling and shipping fee. GANYMEDE ACRYLIC System, Curing time: 5 minutes. CLEAR. NEW DESCRIPTION *Hazardous product, extra handling and shipping fee. QUANTITY KIT LIQUID POWDER Kit. Liquid, 32 oz. CMJE-01K Liquid. Liquid, 12 oz. CMJE-L012 Liquid. Liquid, 32 oz. CMJE-L032 Liquid. Liquid, 5 gal. CMJE-L5GA Powder. 1 lb. CMJE-P001 Powder. 5 lbs. CMJE-P005 Powder. 25 lbs. CMJE-P CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

24 POLYESTER System TECHNOVIT 4000 SYSTEM DESCRIPTION QUANTITY KIT Powder, 2.0 kg. Technovit 4000, Large Kit. Liquid I, 1000 ml. 232-L Liquid II, 500 ml. Technovit 4000, Liquid I ml. 232-Liquid I Technovit 4000, Liquid II. 500 ml. 232-Liquid II *Hazardous product, extra handling and shipping fee. MOUNTING NOTES TEL: FAX: anamet@anamet.com 19

25 CASTABLE MOUNTING Accessories MOUNTING PLASTIC COVERS DESCRIPTION Plastic Covers, 1 " (25 mm) Plastic Covers, 1.25 " (32 mm) Plastic Covers, 1.5 " (38 mm). 50 PLASTIC MOUNTING CUPS DESCRIPTION Mounting Cups, 1 " (25 mm) Mounting Cups, 1.25 " (32 mm) Mounting Cups, 1.5 " (38 mm). 10 GALILEO 2 PIECES PLASTIC MOLDS for Epoxies DESCRIPTION CMMC-100 Plastic Mounting Cups, 1 " (25 mm). 1 CMMC-125 Plastic Mounting Cups, 1.25 " (32 mm). 1 CMMC-150 Plastic Mounting Cups, 1.5 " (38 mm). 1 CMMC-200 Plastic Mounting Cups, 2 " (51 mm). 1 NEW DISPOSABLE MOLDS DESCRIPTION Disposable Molds, 1.25 " (32 mm) Disposable Molds, 1.50 " (38 mm) Disposable Molds, 3.00 " (76 mm). 25 TEAR-OFF PLASTIC MOLDS DESCRIPTION Tear-off Plastic Molds 50/pk. SILICONE RUBBER MOLDS DESCRIPTION Silicone Rubber Molds, 1 " (25 mm) Silicone Rubber Molds, 1.25 " (32 mm) Silicone Rubber Molds, 1.5 " (38 mm) Silicone Rubber Molds, 2 " (51 mm) CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

26 PHENOLIC RING MOLDS* DESCRIPTION Ring Molds, Phenolic, 1 " (25 mm) Ring Molds, Phenolic, 1.25 " (32 mm) Ring Molds, Phenolic, 1.5 " (38 mm) Ring Molds, Phenolic, 2 " (51 mm) 10 * Also available in quantities of 100 / Pk. SPRAY ADHESIVE DESCRIPTION Spray Adhesive. 19 oz. MOUNTING MOLD RELEASE DESCRIPTION Spray Mold Release. 19 oz. 230-WAX Release Wax Powder. 12 oz. ANTISTICK STEARABLE POWDER DESCRIPTION Mold Release. 8 oz SPECIMEN LACQUER SPRAY DESCRIPTION Specimen Lacquer Spray. 12 oz STIRRING STICKS, PAPER CUPS DESCRIPTION Stirring Sticks Paper Cups, 3 oz Paper Cups, 5 oz. 100 CLEANING SOLUTIONS DESCRIPTION Cleaning Solution. 32 oz Cleaning Solution. 128 oz. TEL: FAX: anamet@anamet.com 21

27 MOUNTING SAMPLE CLIPS DESCRIPTION Spring Clips, Metal Spring Clips, Metal Spring Clips, Metal Spring Clips, Metal, 6mm Spring Clips, Metal, 9mm Spring Clips, Plastic, white Spring Clips, Plastic, white Spring Clips, Plastic, white C Plastic Colored Clips C Plastic Colored Clips C Plastic Colored Clips C Plastic Colored Clips M Multisample Clips with Support U Plastic Clips with Support Multisample Clips, 1mm Multisample Clips, 2mm Multisample Clips, 3mm. 100 NOTES 22 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

28 ABRASIVE Belts Abrasive belts are generally used after sample sectioning and previous to mounting to remove scale orburrs. Constructed of X weight cloth, a heavy backing material, the abrasive belts can be used wet or dry. To make the most effective use of the abrasive belts the choice of correct joint is very important. These belts have a special butt splice, reinforced with a strong plastic film to prevent specimen "bump" where the ends meet. Silicon Carbide Abrasive, the most frequently used in a materials laboratory, with a hardness of 9.6, is a brittle mineral used for a wide range of ferrous and non-ferrous metals. Aluminum Oxide Abrasive, hardness 9.4, is also a mineral that is tough and durable. Zirconia-Alumina Abrasive, hardness of 8.5, a very hard alloy mineral of aluminum and zirconium oxide, is very effective for coarse grade stock removal. All the above-mentioned abrasives have very wedge-shaped grains. SILICON CARBIDE ( WET or DRY ) Dimensions: 4 " x 36 " (102 mm x 914 mm) GRIT GRINDING ALUMINUM OXYDE ( WET or DRY ) Dimensions: 4 " x 36 " (102 mm x 914 mm) ZIRCONIA - ALUMINIA ( WET or DRY ) Dimensions: 4 " x 36 " (102 mm x 914 mm) GRIT GRIT ZIRCONIA OXYDE ( WET or DRY ) Dimensions: 4 " x 36 " (102 mm x 914 mm) GRIT TEL: FAX: anamet@anamet.com 23

29 ABRASIVE Rolls Abrasive Rolls, Sheets and Strips made of silicon carbide are used for hand grinding. These products are a careful combination of abrasive type, resin system, and backing material designed to meet the specifications of the Metallurgist. These products can be used wet or dry. SILICON CARBIDE ( WET or DRY ) Dimensions: 3 (76 mm) GRINDING GRIT Dimensions: 3 7/8 " (88 mm) GRIT NOTES 24 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

30 ABRASIVE Strips SILICON CARBIDE Dimensions: 3" x 11 " (76 mm x 279 mm) WET AND DRY. PSA. NOTES GRIT GRINDING TEL: FAX: anamet@anamet.com 25

31 ABRASIVE Discs Coarse grinding removes any deformed surfaces resulting from sectioning and minimizes any new deformations. Abrasive discs such as Silicon Carbide, Aluminum Oxide, Zirconia, Diamond and Micro Mesh discs are used for this process. The selection will depend on the hardness and type of the material. The Aluminum Oxide abrasive discs are recommended for ferrous material. Silicon Carbide abrasive discs are used for non-ferrous and soft steel materials. Water is recommended as a coolant to prevent overheating of the sample and to remove abrasion debris. The metallographic specimen is treated from the coarser to finer grits of abrasive. The abrasive discs are available with either Plain Back or with Pressure Sensitive Adhesive. GRINDING SILICON CARBIDE ( WET or DRY ) Diameter: 2 7/8 (73 mm) PSA C-Weight GRIT SILICON CARBIDE Diameter: 8" (203 mm) Plain Back SILICON CARBIDE ( WET or DRY ) Diameter: 8" (203 mm) PSA C-Weight GRIT GRIT CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

32 SILICON CARBIDE Diameter: 9" (229 mm) Plain Back SILICON CARBIDE ( WET or DRY ) Diameter: 9" (229 mm) PSA C-Weight GRIT SILICON CARBIDE Diameter: 10" (254 mm) Plain Back GRIT SILICON CARBIDE ( WET or DRY ) Diameter: 10" (254 mm) PSA C-Weight GRINDING GRIT GRIT SILICON CARBIDE Diameter: 12" (305 mm) Plain Back SILICON CARBIDE ( WET or DRY ) Diameter: 12" (305 mm) PSA C-Weight GRIT GRIT TEL: FAX: anamet@anamet.com 27

33 SILICON CARBIDE Diameter: 14" (356 mm) Plain Back SILICON CARBIDE ( WET or DRY ) Diameter: 14" (356 mm) PSA C-Weight GRINDING GRIT ALUMINUM Oxyde ( WET or DRY ) Diameter: 8" (203 mm) Plain Back C-Weight GRIT ALUMINUM Oxyde ( WET or DRY ) Diameter: 12" (305 mm) Plain Back C-Weight GRIT GRIT ZIRCONIUM Oxyde ( WET or DRY ) Diameter: 12" (305 mm) Plain Back Clothing backing ZIRCONIUM Oxyde ( WET or DRY ) Diameter: 12" (305 mm) Plain Back Clothing backing GRIT GRIT NOTES 28 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

34 DOUBLE - SIDED ADHESIVES Discs The double-sided adhesive is a re-usable adhesive to attach non-adhesive abrasive papers to the metal plate. It can also be used between the polishing pads and the wheel to provide an additional barrier. The uniform thickness preserves the flatness of any material applied. DIAMETER (203 mm) (254 mm) (305 mm) (356 mm) 10 PLASTIC CLING TO BE APPLIED ON A REGULAR DISC WHEN USING A DIAMOND LAPPING FILM OR A NOVA SiC MYLAR FILM. NEW GRINDING DIAMETER PAPC (200 mm) 5 PAPC (254 mm) 5 PAPC (300 mm) 5 NOTES TEL: FAX: anamet@anamet.com 29

35 MAGNETIC DISC System Welcome to the new easy and affordable way to change the polishing unit into a versatile Magnetic Disc System. The PSA Magnetic Support Disc and the FAS-M Metallic Disc is more affordable than a new platen. The Magnetic Support Disc is a PSA magnetic rubber disc available in 8 and 12 inch diameters. All that is required to change the old platen to a versatile magnetic system is to peel the PSA side of the Magnetic Support Disc and apply it to the platen. The Magnetic Support Disc can be used on any conventional system. Once the platen is equipped with the Magnetic Support Disc, place the metallic side of the FAS-M Disc on the rubber surface of the platen. Apply the selective abrasive disc or polishing cloth onto the green side of the FAS-M metal disc. The green plastisized side of the metallic disc will support 1000 changes. The Magnetic Disc System is recommended to metallography lab technicians dealing with the preparation of a wide range of products or having to use a wide array of abrasive discs or polishing cloths. GRINDING BLACK HOLE Magnetic foil SELF ADHESIVE MAGNETIC BASE. Transform regular preparation disc in a magnetic disc. NEW DIAMETER PAMP (200 mm) 1 PAMP (254 mm) 1 PAMP (300 mm) 1 SUPERNOVA Polishing pad base plate USE IN CONJUNCTION WITH A PSA CLOTH OR SiC DISC. To be used on a magnetic disc. NEW DIAMETER PAPP (200 mm) 1 PAPP (254 mm) 1 PAPP (300 mm) 1 30 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

36 DIAMOND Discs Diamond discs consist of a layer of carefully graded diamonds securely bonded to a 1/16 inch flat metal plate. Two bond types are available, metal bond and resin bond. Metal bond diamond discs consist of diamond particles electroplated to a 1/16 inch flat plate with a nickel bond. This process provides maximum bond strength, an aggressive cutting action and extends disc life. Resin bonded diamond discs use a resin matrix to bond the diamond particles to a flat aluminum backing. This results in a less aggressive cutting action but a finer finish. Both types of diamond discs are intended for ceramics, carbides and carbide alloys, nitrides, zirconia and other hardened metals. Regulating pressure and lubricant flow can control the texture of the finish obtained. DIAMOND GRINDING Discs Diameter: 8" (203 mm) Resin Bond DIAMOND GRINDING Discs Diameter: 8" (203 mm) Resin Bond -- PSA GRINDING MICRONS MICRONS DIAMOND GRINDING Discs Diameter: 8" (203 mm) Metal Bond -- PSA DIAMOND GRINDING Discs Diameter: 12" (305 mm) Metal Bond -- PSA MICRONS MICRONS NOTES TEL: FAX: anamet@anamet.com 31

37 DIAMOND SPOT Discs Diamond spot discs consist of spot diamond electroplating through a color-coded nylon mesh substrate. This application procedure gives a longer life to the diamond spot disc, providing an aggressive material removal rate. The quality of the sample surface obtained will be dependent on the flatness of the substrate on which it is used. Since the fixed diamonds are much harder than the specimen and mounting material, the diamond spot discs will cut both at the same rate. This characteristic produces specimen edges with distinct sharpness. Diamond spot discs will prove most effective on hard nonferrous metals, ceramic, carbides, zirconia alloys, cobalt super alloys, high-speed steels and titanium GRINDING DIAMOND SPOT Discs Diameter: 8" (203 mm) Resin Bond -- PSA MICRONS DIAMOND SPOT Discs Diameter: 12" (305 mm) Resin Bond -- PSA MICRONS DIAMOND SPOT Discs Diameter: 8" (203 mm) Metal Bond -- PSA DIAMOND SPOT Discs Diameter: 12" (305 mm) Metal Bond -- PSA MICRONS MICRONS DRESSING Sticks for Diamond discs DESCRIPTION Diamond Dressing Stick, SiC 1" x 1" x 6" Diamond Dressing Stick, Al2O3 1" x 1" x 6" 1 32 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

38 HIGH PURITY ALUMINA Powder Polishing Powders are used in the final polishing step for many materials. Alumina Oxide is available in either levigated or as a high purity synthetic (powder or suspension). The particle size and crystal structure are temperature dependent. The Gamma type is of low temperature form and is sized 0.05 micron. The Alpha is of high temperature form and is sized at 1.0 and 0.3 micron. HIGH PURITY ALUMINA Powder NON DEAGGLOMERATED FORM DESCRIPTION MICRON Alpha C, 1 1 lb kg Hexagonal 1 5 lbs kg Alpha C, lb kg Hexagonal lbs kg Gamma B, lb kg Cubic lbs kg lb kg. Levigated lbs kg lb kg. Levigated lbs kg. POLISHING DEAGGLOMERATED FORM DESCRIPTION MICRON Alpha C, 1 1 lb kg Hexagonal 1 5 lbs kg Alpha C, lb kg Hexagonal lbs kg Gamma B, lb kg Cubic lbs kg lb kg. Levigated lbs kg lb kg. Levigated lbs kg lb kg. Levigated lbs kg lb kg. Levigated lbs kg. TEL: FAX: anamet@anamet.com 33

39 HIGH PURITY ALUMINA DEAGGLOMERATED SUSPENSION DESCRIPTION MICRON 5601S- 8 Alpha C, 1 8 oz l. 5601S-128 Hexagonal 1 1 gal l. 5603S- 8 Alpha C, oz l. 5603S-128 Hexagonal gal l. 5605S- 8 Gamma B, oz l. 5605S-128 Cubic gal l. CERIUM Suspension MICRON 5911S oz l. 5911S gal l. POLISHING The Cerium suspension is recommended for the final polishing step of soft materials such as copper, aluminum and lead. COLLOIDAL SILICA Suspension MICRON 5904S oz l. 5904S oz l. 5904S gal l. 5904S gal l. Colloidal Silica suspension is composed of a slow crystallizing formula, which is recommended for ceramics, composites, and non-ferrous materials. NEW STARDUST COLLOIDAL SILICA Suspension MICRON FACW oz l. FACW oz l. FACW oz l. 34 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

40 COLLOIDAL ALUMINA Suspension MICRON 5905S oz l. 5905S oz l. 5905S oz l. 5905S gal l. The mixture of colloidal silica and high purity Alumina suspension is recommended for the final polishing of non-ferrous and ferrous materials. NOTES POLISHING TEL: FAX: anamet@anamet.com 35

41 ALUMINUM OXIDE Powder POLISHING MICRON lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg. 36 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

42 ALUMINUM OXIDE Powder GRIT grit 5 lbs. 2.3 kg grit 25 lbs kg grit 5 lbs. 2.3 kg grit 25 lbs kg grit 5 lbs. 2.3 kg grit 25 lbs kg. SILICON CARBIDE Powder GRIT lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg lb kg lbs. 2.3 kg lbs kg. POLISHING TEL: FAX: anamet@anamet.com 37

43 DIAMOND Extenders The diamond extender either, water, oil, alcohol or water/oil base can be applied by squirt or spray. The type of diamond extender to be used, will depend on the material to be polished. The extenders maximize the cutting action of the diamond product and maintain an even dispersion of the diamond abrasive over the entire polishing cloth. An alcohol base extender is recommended for high stock removal rate, requiring a high cooling. A low viscosity extender is used for low cooling and low stock removal. Excessive volume of diamond extender during polishing can result in loss of diamond abrasive. WATER Base RED oz l oz l gal l. POLISHING OIL Base PINK oz l. OIL Base oz l gal l. NOTES ALCOHOL Base BLUE 544S oz l. 544S oz l. 544S gal l. 544S gal l. WATER and OIL Base DEEP BLUE oz l oz l gal l. This lubricant has the ability to behave as a carrier in water and oil base diamond suspension. 38 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

44 DIAMOND Abrasives Diamond abrasives can be used in the polishing step for all materials. The diamond abrasives of standard, medium and heavy concentration are universally soluble in water and oil. DIAMOND PASTE Water Soluble MONOCRYSTALLINE POLYCRYSTALLINE MICRON GRAMS MICRON GRAMS 5.1MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MONOCRYSTALLINE POLYCRYSTALLINE MICRON GRAMS MICRON GRAMS 5.1MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* MW* PW* POLISHING DIAMOND PASTE Oil Soluble MONOCRYSTALLINE POLYCRYSTALLINE MICRON GRAMS MICRON GRAMS 501-MO* PO* MO* PO* MO* PO* MO* PO* MO* PO* MO* PO* MO* PO* NOTE: When ordering replace the "*" in product number by "M" for medium, "S" for standard, "H" for heavy diamond concentration. TEL: FAX: anamet@anamet.com 39

45 DIAMOND Suspensions Polycrystalline and monocrystalline diamond suspensions are used to remove the material while minimizing shallow scratch depth. Polycrystalline diamonds have many facets providing a large number of cutting edges. Monocrystalline diamonds have less diamond facets and are designed for all-purpose polishing. DIAMOND SUSPENSIONS Water Soluble POLISHING MONOCRYSTALLINE POLYCRYSTALLINE MICRON MICRON 5.5-MDS- 8 8 oz. 5.5-PDS- 8 8 oz. 5.5-MDS oz. 5.5-PDS oz. 5.5-MDS oz. 5.5-PDS oz. 501-MDS- 8 8 oz. 501-PDS- 8 8 oz. 501-MDS oz. 501-PDS oz. 501-MDS oz. 501-PDS oz. 503-MDS- 8 8 oz. 503-PDS- 8 8 oz. 503-MDS oz. 503-PDS oz. 503-MDS oz. 503-PDS oz. 506-MDS- 8 8 oz. 506-PDS- 8 8 oz. 506-MDS oz. 506-PDS oz. 506-MDS oz. 506-PDS oz. 509-MDS- 8 8 oz. 509-PDS- 8 8 oz. 509-MDS oz. 509-PDS oz. 509-MDS oz. 509-PDS oz. 515-MDS- 8 8 oz. 515-PDS- 8 8 oz. 515-MDS oz. 515-PDS oz. 515-MDS oz. 515-PDS oz. 530-MDS- 8 8 oz. 530-PDS- 8 8 oz. 530-MDS oz. 530-PDS oz. 530-MDS oz. 530-PDS oz. 545-MDS- 8 8 oz. 545-PDS- 8 8 oz. 545-MDS oz. 545-PDS oz. 545-MDS oz. 545-PDS oz. NOTES 40 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

46 DIAMOND SUSPENSIONS Water Soluble HEAVY CONCENTRATION POLYCRYSTALLINE MICRON 5.5-HDS- 8 8 oz. 5.5-HDS oz. 5.5-HDS oz. 501-HDS- 8 8 oz. 501-HDS oz. 501-HDS oz. 503-HDS- 8 8 oz. 503-HDS oz. 503-HDS oz. 506-HDS- 8 8 oz. 506-HDS oz. 506-HDS oz. 509-HDS- 8 8 oz. 509-HDS oz. 509-HDS oz. 515-HDS- 8 8 oz. 515-HDS oz. 515-HDS oz. 530-HDS- 8 8 oz. 530-HDS oz. 530-HDS oz. 545-HDS- 8 8 oz. 545-HDS oz. 545-HDS oz. POLISHING DIAMOND SUSPENSION Oil Soluble MONOCRYSTALLINE POLYCRYSTALLINE MICRON MICRON 5.5-MO* oz. 5.5-PO* oz. 501-MO* oz. 501-PO* oz. 503-MO* oz. 503-PO* oz. 506-MO* oz. 506-PO* oz. 509-MO* oz. 509-PO* oz. 515-MO* oz. 515-PO* oz. 530-MO* oz. 530-PO* oz. 545-MO* oz. 545-PO* oz. NOTE: When ordering replace the "*" in product number by "M" for medium, "S" for standard, "H" for heavy diamond concentration. TEL: FAX: anamet@anamet.com 41

47 POLISHING Cloths Rough polishing is considered to be the crucial stage in the entire metallographic preparation sequence. The type of cloth and abrasive selected is critical. It is important to keep relief between the different constituents in the sample to a minimum. Using napless cloths, such as nylon, cotton, silk, etc. will minimize the possibility of relief and take full advantage of the cutting edge of the abrasive. The type of cloth selected usually depends on the hardness of the material to polish. Napped cloths are usually used for final polishing. This type of cloth has long fibers and is compressible. The softer phases will have a higher rate of removal than the harder phases. The polishing cloths are available in several diameters with plain back or pressure sensitive adhesive backing. POLISHING Note: Most of the polishing cloths offered in this catalogue are available in other disc diameters than those listed in the above tables. They are also available as rolls, strips or sheets. Contact the order desk for prices. NYLON A synthetic napless cloth with a dense, controlled weave recommended for coarse diamond polishing. Also available with PSA back. Produces and maintains flatness. PLAIN BACK mm. 8 " mm. 10 " mm. 12 " mm. 14 " 10 PSA mm. 2 7/8 " mm. 8 " mm. 10 " mm. 12 " mm. 14 " mm. 16 " x1014 mm. 52" x 70" Each. 42 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

48 SILK A steam processed pure Japanese silk with a linear count of 125 threads per inch is recommended for coarse diamond polishing. The weave pattern is more open than nylon. PLAIN BACK mm. 8 " mm. 10 " mm. 12 " mm. 14 " 10 ALASKA Made of 100% acetate fibers woven to a satin finish. Recommended for use with diamond suspensions. Should not be used when stock removal is required. PLAIN BACK mm. 8 " mm. 10 " mm. 12 " 10 POLISHING CANVAS A 10-ounce of canvas duck is recommended for very rough polishing using Alumina 0xide or Silicon Carbide powders. It exhibits a loosely woven pattern with numerous free ends. PLAIN BACK mm. 8 " mm. 10 " mm. 12 " 10 TEL: FAX: anamet@anamet.com 43

49 SELVIT A steam processed pure Japanese silk with a linear count of 125 threads per inch is recommended for coarse diamond polishing. The weave pattern is more open than nylon. PLAIN BACK mm. 8 " mm. 10 " mm. 12 " 10 POLISHING KITTEN A highly napped, all wool broadcloth recommended for final polishing. Its softness produces high quality surfaces with fine abrasives, but relief can develop. The weave pattern is similar to red felt. Also available with PSA back PLAIN BACK mm. 8 " mm. 10 " mm. 12 " 10 PSA mm. 8 " mm. 10 " mm. 12 " mm. 14 " CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

50 COTLAP Cotton cloth with practically no nap. For use with diamond polishing compounds in the rough polishing stages. Can also be used with polishing Alumina. PLAIN BACK mm. 8 " mm. 10 " mm. 12 " 10 VELVET A high nap synthetic cloth consisting of long, smooth vertical fibers. Recommended for final polishing of soft metals where its softness helps produce deformation free, scratch free surfaces. Good for suspension and skid polishing. PLAIN BACK mm. 8 " mm. 10 " mm. 12 " 10 POLISHING NOTES TEL: FAX: anamet@anamet.com 45

51 FINAL FINISH I A soft synthetic medium napped velvet cloth. Recommended for use with Colloidal silica, Alumina suspension and Diamond polishing compounds on soft metals. Also available with PSA back PLAIN BACK mm. 8 " mm. 10 " mm. 12 " 10 POLISHING PSA mm. 2 7/8 " mm. 8 " mm. 10 " mm. 12 " mm. 14 " 10 FINAL FINISH II A soft synthetic long napped rayon cloth in which fibers are bonded to woven cotton backing. Recommended for use with Colloidal silica, Alumina suspension and Diamond polishing compounds. PSA mm. 8 " mm. 10 " mm. 12 " CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

52 IMPERIAL A 20-mil rayon flock electrostatically coated onto a 3 mil polyester film. A soft short napped cloth. Recommended for final polishing of most materials using Colloidal Silica PSA mm. 2 7/8 " mm. 8 " mm. 10 " mm. 12 " 10 BLUE STREAK Medium soft wool cloth for intermediate polishing steps of non-ferrous material. PSA mm. 2 7/8 " mm. 8 " mm. 10 " mm. 12 " 10 POLISHING DUNE A hard woven material, rayon. Does not have the buffed surface of similar cloths. Recommended for high removal rate for most hard material. PSA mm. 8 " mm. 10 " mm. 12 " 10 TEL: FAX: anamet@anamet.com 47

53 RED FELT A tightly woven 100 % virgin wool colorfast fabric. The pile is plucked rather than sheared. Has increased wear over Billiard cloth. Recommended for general rough polishing for ferrous-based materials using Alumina. Also available with PSA back PLAIN BACK mm. 8 " mm. 10 " mm. 12 " 10 POLISHING PSA mm. 2 7/8 " mm. 8 " mm. 10 " mm. 12 " mm. 14 " 10 KIWI An acrylic cloth. Recommended for general rough polishing for large sectional pieces using diamond abrasives. PSA mm. 8 " mm. 10 " mm. 12 " mm. 14 " CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

54 KOALA An acrylic cloth. Recommended for general rough polishing for large sectional pieces using diamond abrasives. PSA mm. 8 " mm. 10 " mm. 12 " mm. 14 " 10 BILLIARD The finest quality 21 oz., 100 % virgin wool fabric with uniform sheared pile, is recommended for rough polishing with Alumina. Also available with PSA back POLISHING PLAIN BACK mm. 8 " mm. 10 " mm. 12 " 10 PSA mm. 8 " mm. 10 " mm. 12 " mm. 14 " 10 TEL: FAX: anamet@anamet.com 49

55 PERFORATED PELLON Hard non-woven perforated cloth. Maximizes removal rate while producing a uniform flat finish. PSA mm. 2 7/8 " mm. 8 " mm. 10 " mm. 12 " 10 PELLON I POLISHING A chemo textile material. Has a high cutting rate when used with diamond polishing compound. Excellent edge and inclusion retention. PSA mm. 2 7/8 " mm. 8 " mm. 10 " mm. 12 " mm. 14 " 10 VICTOR A very dense synthetic silk cloth with no nap. For use with diamond polishing abrasives in the rough and intermediate stages. Good for polishing most materials. PSA mm. 2 7/8 " mm. 8 " mm. 10 " mm. 12 " CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

56 TECHNOTRON. MM414 (white) A natural silk cloth with practically no nap. For use with diamond polishing abrasives in the rough and intermediate stages. Good for polishing most materials. PSA mm. 2 7/8 " mm. 8 " mm. 10 " mm. 12 " 5 TECHNOTRON. MM431 (red) A silk cloth with medium nap. For use with diamond polishing abrasives in the rough and intermediate stages. Good for polishing medium to soft materials. PSA mm. 2 7/8 " mm. 8 " mm. 10 " mm. 12 " 5 POLISHING TECHNOTRON. MM421 (gold) An acetate silk cloth with medium nap. For use with diamond polishing abrasives in the rough and intermediate stages. Good for polishing medium to soft materials. PSA mm. 2 7/8 " mm. 8 " mm. 10 " mm. 12 " 5 TEL: FAX: anamet@anamet.com 51

57 BLACK STAR NEW Polymer with micro pores. Chemical-mechanical polishing. Final polishing of aluminum, copper, titanium and stainless steel. Oxide suspensions. (M: magnetic). PSA PCBS mm. 8 " 10 PCBS mm. 10 " 10 PCBS mm. 12 " 10 PCBS-M mm. 8 " 5 PCBS-M mm. 10 " 5 PCBS-M mm. 12 " 5 POLISHING JAY Hard non-woven textile napless chemotextile cloth. Recommended for hard removal of hard material during the intermediate polishing stages. PSA NEW mm. 8 " mm. 10 " mm. 12 " 10 ARTIC A synthetic silk cloth with no nap. For use with diamond polishing abrasives in the rough and intermediate stages. Good for polishing medium to hard materials. PSA 669N mm. 2 7/8 " N mm. 8 " N mm. 10 " N mm. 12 " CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

58 CAMEO DISCS (gold) For use with diamond polishing abrasives in the rough and intermediate stages. Good for polishing soft and non-ferrous materials. PSA mm. 8 " mm. 12 " 2 CAMEO DISCS (silver) For use with diamond polishing abrasives in the rough and intermediate stages. Good for polishing medium to very hard materials. PSA mm. 8 " mm. 12 " 2 POLISHING POLARIS NEW Non-woven. Intermediate polishing pad for most materials including ferrous and nonferrous metals and ceramics. Povides superior edge retention. 9, 6, 3 and 1 micron diamond paste and suspensions. (M: magnetic). PSA PCPO mm. 8 " 10 PCPO mm. 10 " 10 PCPO mm. 12 " 10 PCPO-M mm. 8 " 5 PCPO-M mm. 10 " 5 PCPO-M mm. 12 " 5 TEL: FAX: anamet@anamet.com 53

59 ADARA NEW Woven synthetic cloth. Surface finishing of ferrous, non-ferrous and electronic materials. Flat, durable. 9, 6, 3 and 1 micron diamond suspensions. (M: magnetic). PSA PCAD mm. 8 " 10 PCAD mm. 10 " 10 PCAD mm. 12 " 10 PCAD-M mm. 8 " 5 PCAD-M mm. 10 " 5 PCAD-M mm. 12 " 5 POLISHING NEPTUNE General purpose, 15-1 micron, Excellent flatness. Very resistant. Intermediate cloth. (M: magnetic). NEW PSA PCNE mm. 8 " 5 PCNE mm. 10 " 5 PCNE mm. 12 " 5 PCNE-M mm. 8 " 5 PCNE-M mm. 10 " 5 PCNE-M mm. 12 " 5 54 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

60 ARRAKIS NEW High nap. Non-ferrous final polishing pad for most ceramics and polymers where moderately soft polishing action is required micron. (M: magnetic). PSA PCAR mm. 8 " 10 PCAR mm. 10 " 10 PCAR mm. 12 " 10 PCAR-M mm. 8 " 5 PCAR-M mm. 10 " 5 PCAR-M mm. 12 " 5 CAPELLA Nylon cloth. Most materials, particularly metals. 15, 9, 6, 3 microns diamond past and suspension. (M: magnetic). NEW POLISHING PSA PCCA mm. 8 " 10 PCCA mm. 10 " 10 PCCA mm. 12 " 10 PCCA-M mm. 8 " 5 PCCA-M mm. 10 " 5 PCCA-M mm. 12 " 5 TEL: FAX: anamet@anamet.com 55

61 ALCOR NEW Rugged, tighly woven. Polishing pad for high stock removal, flatness. Reduces overall polishing time.very efficient Rough polishing. Eliminates most silicon carbide steps. 15, 9, 6 microns diamond. (M: magnetic). PSA PCAL mm. 8 " 10 PCAL mm. 10 " 10 PCAL mm. 12 " 10 PCAL-M mm. 8 " 5 PCAL-M mm. 10 " 5 PCAL-M mm. 12 " 5 POLISHING ARCTURUS Short nap. Polishing polymers (plastics), lead/tin solders, electronic and certain type glass. 1 micron paste or suspension, all types of oxide solutions. (M: magnetic). PSA PCAU mm. 8 " 10 PCAU mm. 10 " 10 PCAU mm. 12 " 10 PCAU-M mm. 8 " 5 PCAU-M mm. 10 " 5 PCAU-M mm. 12 " 5 56 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

62 ATLAS NEW 320 mesh stainless steel cloth. Excellent for coarse grinding, rough polishing of ceramics, tool steels and other hard materials. 30, 15 microns diamond suspensions. PSA PCAT mm. 8 " 5 PCAT mm. 10 " 5 PCAT mm. 12 " 5 NOTES POLISHING TEL: FAX: anamet@anamet.com 57

63 NOTES POLISHING 58 CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

64 APPLICATION Notes Field metallography describes the practice of performing micro structural analysis outside the metallurgical laboratory. It can include everything from grain sizing of titanium forging on a production floor all the way to steam boiler failure analysis on a ship. Process requirements include all of the specimen preparation procedures performed in the metallography lab. Field metallography begins with the very rough grinding of the selected area, usually with a 60 grit abrasive. Thick scale and rust must be removed over an area larger than the ultimate spot. Each area worked should be smaller than that worked in the previous step. This reduces the opportunity of dragging large particles across the prepared area. After rough grinding, a sequence of fine grinding steps follow. The use of an etchant after polishing is often required to bring out the relevant microstructure. Analysis and documentation are the final steps in field metallography. This can be achieved with either the new silicone rubber methods or the cellulose acetate tape using the replication technique. The equipment used in field metallography is very diverse. For rough grinding, right angle grinders or portable belt sanders are popular. Fine grinding and polishing can be accomplished with variable speed drills or dremel tools. REPLICA Tape Acetate base. DESCRIPTION Clear, 1 MIL, 1 inch x 25 feet roll 1 REPLICA Gun and Accessories Clear, 5 MIL, 1 inch x 25 feet roll 1 METALLOGRAPHY DESCRIPTION 280-Gun Dispensing Gun for Provil Novo Light C.D Mix Mixing cannula Provil Novo Light C.D Tip Tip for dispensing Provil Novo Light C.D Cart Provil Novo light C.D. 1 TEL: FAX: anamet@anamet.com 59

65 PSA Disc Holder DESCRIPTION inch diameter holder with 1/8 in. shaft inch diameter holder with 1/4 in. shaft inch diameter holder with 1/4 in. shaft 1 ABRASIVE Discs SILICON CARBIDE METALLOGRAPHY Diameter: 1 inch ( 25 mm ) PSA GRIT Diameter: 1.25 inch ( 32 mm ) PSA Diameter: 2.0 inch ( 51 mm ) PSA CANNOT FIND A SPECIFIC ITEM, CALL. TEL: WE ARE CONTINUALLY FAX: ADDING S TO OUR anamet@anamet.com INVENTORY.

66 POLISHING Cloths Diameter: 1 inch ( 25 mm ) PSA TYPE Nylon Kitten Final Finish I Final Finish II Imperial Blue Streak Red Felt Pellon I Technotron 10 Diameter: 1.25 inch ( 32 mm ) PSA Diameter: 2.0 inch ( 51 mm ) PSA Nylon Nylon Kitten Kitten Final Finish I Final Finish I Final Finish II Final Finish II Imperial Imperial Blue Streak Blue Streak Red Felt Red Felt Pellon I Pellon I Technotron Technotron 10 NOTES METALLOGRAPHY TEL: FAX: anamet@anamet.com 61